dt-bindings: rcc: Convert stm32mp1 rcc bindings to json-schema
Convert the STM32MP1 RCC binding to DT schema format using json-schema. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
This commit is contained in:
Gabriel Fernandez
Rob Herring
parent
70a97443d9
commit
20107d7328
|
|
@ -1,60 +0,0 @@
|
|||
STMicroelectronics STM32 Peripheral Reset Clock Controller
|
||||
==========================================================
|
||||
|
||||
The RCC IP is both a reset and a clock controller.
|
||||
|
||||
RCC makes also power management (resume/supend and wakeup interrupt).
|
||||
|
||||
Please also refer to reset.txt for common reset controller binding usage.
|
||||
|
||||
Please also refer to clock-bindings.txt for common clock controller
|
||||
binding usage.
|
||||
|
||||
|
||||
Required properties:
|
||||
- compatible: "st,stm32mp1-rcc", "syscon"
|
||||
- reg: should be register base and length as documented in the datasheet
|
||||
- #clock-cells: 1, device nodes should specify the clock in their
|
||||
"clocks" property, containing a phandle to the clock device node,
|
||||
an index specifying the clock to use.
|
||||
- #reset-cells: Shall be 1
|
||||
- interrupts: Should contain a general interrupt line and a interrupt line
|
||||
to the wake-up of processor (CSTOP).
|
||||
|
||||
Example:
|
||||
rcc: rcc@50000000 {
|
||||
compatible = "st,stm32mp1-rcc", "syscon";
|
||||
reg = <0x50000000 0x1000>;
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 145 IRQ_TYPE_NONE>;
|
||||
};
|
||||
|
||||
Specifying clocks
|
||||
=================
|
||||
|
||||
All available clocks are defined as preprocessor macros in
|
||||
dt-bindings/clock/stm32mp1-clks.h header and can be used in device
|
||||
tree sources.
|
||||
|
||||
Specifying softreset control of devices
|
||||
=======================================
|
||||
|
||||
Device nodes should specify the reset channel required in their "resets"
|
||||
property, containing a phandle to the reset device node and an index specifying
|
||||
which channel to use.
|
||||
The index is the bit number within the RCC registers bank, starting from RCC
|
||||
base address.
|
||||
It is calculated as: index = register_offset / 4 * 32 + bit_offset.
|
||||
Where bit_offset is the bit offset within the register.
|
||||
|
||||
For example on STM32MP1, for LTDC reset:
|
||||
ltdc = APB4_RSTSETR_offset / 4 * 32 + LTDC_bit_offset
|
||||
= 0x180 / 4 * 32 + 0 = 3072
|
||||
|
||||
The list of valid indices for STM32MP1 is available in:
|
||||
include/dt-bindings/reset-controller/stm32mp1-resets.h
|
||||
|
||||
This file implements defines like:
|
||||
#define LTDC_R 3072
|
||||
|
|
@ -0,0 +1,79 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/bindings/clock/st,stm32mp1-rcc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Reset Clock Controller Binding
|
||||
|
||||
maintainers:
|
||||
- Gabriel Fernandez <gabriel.fernandez@st.com>
|
||||
|
||||
description: |
|
||||
The RCC IP is both a reset and a clock controller.
|
||||
RCC makes also power management (resume/supend and wakeup interrupt).
|
||||
Please also refer to reset.txt for common reset controller binding usage.
|
||||
|
||||
This binding uses common clock bindings
|
||||
Documentation/devicetree/bindings/clock/clock-bindings.txt
|
||||
|
||||
Specifying clocks
|
||||
=================
|
||||
|
||||
All available clocks are defined as preprocessor macros in
|
||||
dt-bindings/clock/stm32mp1-clks.h header and can be used in device
|
||||
tree sources.
|
||||
|
||||
Specifying softreset control of devices
|
||||
=======================================
|
||||
|
||||
Device nodes should specify the reset channel required in their "resets"
|
||||
property, containing a phandle to the reset device node and an index specifying
|
||||
which channel to use.
|
||||
The index is the bit number within the RCC registers bank, starting from RCC
|
||||
base address.
|
||||
It is calculated as: index = register_offset / 4 * 32 + bit_offset.
|
||||
Where bit_offset is the bit offset within the register.
|
||||
|
||||
For example on STM32MP1, for LTDC reset:
|
||||
ltdc = APB4_RSTSETR_offset / 4 * 32 + LTDC_bit_offset
|
||||
= 0x180 / 4 * 32 + 0 = 3072
|
||||
|
||||
The list of valid indices for STM32MP1 is available in:
|
||||
include/dt-bindings/reset-controller/stm32mp1-resets.h
|
||||
|
||||
This file implements defines like:
|
||||
#define LTDC_R 3072
|
||||
|
||||
properties:
|
||||
"#clock-cells":
|
||||
const: 1
|
||||
|
||||
"#reset-cells":
|
||||
const: 1
|
||||
|
||||
compatible:
|
||||
items:
|
||||
- const: st,stm32mp1-rcc
|
||||
- const: syscon
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- "#clock-cells"
|
||||
- "#reset-cells"
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
rcc: rcc@50000000 {
|
||||
compatible = "st,stm32mp1-rcc", "syscon";
|
||||
reg = <0x50000000 0x1000>;
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
...
|
||||
Loading…
Reference in New Issue