drivers/rtc: add support for Microchip MCP795
Add driver for SPI RTC Microchip MCP795. Only supports saving/loading time from the chip (i. e. no alarms/power events/ID). Signed-off-by: Josef Gajdusek <atx@atx.name> Cc: Jingoo Han <jg1.han@samsung.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Josef Gajdusek
Linus Torvalds
parent
10b06b87b7
commit
1fcbe42c1b
|
|
@ -661,6 +661,14 @@ config RTC_DRV_RX4581
|
|||
This driver can also be built as a module. If so the module
|
||||
will be called rtc-rx4581.
|
||||
|
||||
config RTC_DRV_MCP795
|
||||
tristate "Microchip MCP795"
|
||||
help
|
||||
If you say yes here you will get support for the Microchip MCP795.
|
||||
|
||||
This driver can also be built as a module. If so the module
|
||||
will be called rtc-mcp795.
|
||||
|
||||
endif # SPI_MASTER
|
||||
|
||||
comment "Platform RTC drivers"
|
||||
|
|
|
|||
|
|
@ -81,6 +81,7 @@ obj-$(CONFIG_RTC_DRV_MAX8997) += rtc-max8997.o
|
|||
obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o
|
||||
obj-$(CONFIG_RTC_DRV_MAX77686) += rtc-max77686.o
|
||||
obj-$(CONFIG_RTC_DRV_MC13XXX) += rtc-mc13xxx.o
|
||||
obj-$(CONFIG_RTC_DRV_MCP795) += rtc-mcp795.o
|
||||
obj-$(CONFIG_RTC_DRV_MSM6242) += rtc-msm6242.o
|
||||
obj-$(CONFIG_RTC_DRV_MPC5121) += rtc-mpc5121.o
|
||||
obj-$(CONFIG_RTC_DRV_MV) += rtc-mv.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,199 @@
|
|||
/*
|
||||
* SPI Driver for Microchip MCP795 RTC
|
||||
*
|
||||
* Copyright (C) Josef Gajdusek <atx@atx.name>
|
||||
*
|
||||
* based on other Linux RTC drivers
|
||||
*
|
||||
* Device datasheet:
|
||||
* http://ww1.microchip.com/downloads/en/DeviceDoc/22280A.pdf
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* */
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/printk.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/rtc.h>
|
||||
|
||||
/* MCP795 Instructions, see datasheet table 3-1 */
|
||||
#define MCP795_EEREAD 0x03
|
||||
#define MCP795_EEWRITE 0x02
|
||||
#define MCP795_EEWRDI 0x04
|
||||
#define MCP795_EEWREN 0x06
|
||||
#define MCP795_SRREAD 0x05
|
||||
#define MCP795_SRWRITE 0x01
|
||||
#define MCP795_READ 0x13
|
||||
#define MCP795_WRITE 0x12
|
||||
#define MCP795_UNLOCK 0x14
|
||||
#define MCP795_IDWRITE 0x32
|
||||
#define MCP795_IDREAD 0x33
|
||||
#define MCP795_CLRWDT 0x44
|
||||
#define MCP795_CLRRAM 0x54
|
||||
|
||||
#define MCP795_ST_BIT 0x80
|
||||
#define MCP795_24_BIT 0x40
|
||||
|
||||
static int mcp795_rtcc_read(struct device *dev, u8 addr, u8 *buf, u8 count)
|
||||
{
|
||||
struct spi_device *spi = to_spi_device(dev);
|
||||
int ret;
|
||||
u8 tx[2];
|
||||
|
||||
tx[0] = MCP795_READ;
|
||||
tx[1] = addr;
|
||||
ret = spi_write_then_read(spi, tx, sizeof(tx), buf, count);
|
||||
|
||||
if (ret)
|
||||
dev_err(dev, "Failed reading %d bytes from address %x.\n",
|
||||
count, addr);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int mcp795_rtcc_write(struct device *dev, u8 addr, u8 *data, u8 count)
|
||||
{
|
||||
struct spi_device *spi = to_spi_device(dev);
|
||||
int ret;
|
||||
u8 tx[2 + count];
|
||||
|
||||
tx[0] = MCP795_WRITE;
|
||||
tx[1] = addr;
|
||||
memcpy(&tx[2], data, count);
|
||||
|
||||
ret = spi_write(spi, tx, 2 + count);
|
||||
|
||||
if (ret)
|
||||
dev_err(dev, "Failed to write %d bytes to address %x.\n",
|
||||
count, addr);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int mcp795_rtcc_set_bits(struct device *dev, u8 addr, u8 mask, u8 state)
|
||||
{
|
||||
int ret;
|
||||
u8 tmp;
|
||||
|
||||
ret = mcp795_rtcc_read(dev, addr, &tmp, 1);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
if ((tmp & mask) != state) {
|
||||
tmp = (tmp & ~mask) | state;
|
||||
ret = mcp795_rtcc_write(dev, addr, &tmp, 1);
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int mcp795_set_time(struct device *dev, struct rtc_time *tim)
|
||||
{
|
||||
int ret;
|
||||
u8 data[7];
|
||||
|
||||
/* Read first, so we can leave config bits untouched */
|
||||
ret = mcp795_rtcc_read(dev, 0x01, data, sizeof(data));
|
||||
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
data[0] = (data[0] & 0x80) | ((tim->tm_sec / 10) << 4) | (tim->tm_sec % 10);
|
||||
data[1] = (data[1] & 0x80) | ((tim->tm_min / 10) << 4) | (tim->tm_min % 10);
|
||||
data[2] = ((tim->tm_hour / 10) << 4) | (tim->tm_hour % 10);
|
||||
data[4] = ((tim->tm_mday / 10) << 4) | ((tim->tm_mday) % 10);
|
||||
data[5] = (data[5] & 0x10) | (tim->tm_mon / 10) | (tim->tm_mon % 10);
|
||||
|
||||
if (tim->tm_year > 100)
|
||||
tim->tm_year -= 100;
|
||||
|
||||
data[6] = ((tim->tm_year / 10) << 4) | (tim->tm_year % 10);
|
||||
|
||||
ret = mcp795_rtcc_write(dev, 0x01, data, sizeof(data));
|
||||
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
dev_dbg(dev, "Set mcp795: %04d-%02d-%02d %02d:%02d:%02d\n",
|
||||
tim->tm_year + 1900, tim->tm_mon, tim->tm_mday,
|
||||
tim->tm_hour, tim->tm_min, tim->tm_sec);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mcp795_read_time(struct device *dev, struct rtc_time *tim)
|
||||
{
|
||||
int ret;
|
||||
u8 data[7];
|
||||
|
||||
ret = mcp795_rtcc_read(dev, 0x01, data, sizeof(data));
|
||||
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
tim->tm_sec = ((data[0] & 0x70) >> 4) * 10 + (data[0] & 0x0f);
|
||||
tim->tm_min = ((data[1] & 0x70) >> 4) * 10 + (data[1] & 0x0f);
|
||||
tim->tm_hour = ((data[2] & 0x30) >> 4) * 10 + (data[2] & 0x0f);
|
||||
tim->tm_mday = ((data[4] & 0x30) >> 4) * 10 + (data[4] & 0x0f);
|
||||
tim->tm_mon = ((data[5] & 0x10) >> 4) * 10 + (data[5] & 0x0f);
|
||||
tim->tm_year = ((data[6] & 0xf0) >> 4) * 10 + (data[6] & 0x0f) + 100; /* Assume we are in 20xx */
|
||||
|
||||
dev_dbg(dev, "Read from mcp795: %04d-%02d-%02d %02d:%02d:%02d\n",
|
||||
tim->tm_year + 1900, tim->tm_mon, tim->tm_mday,
|
||||
tim->tm_hour, tim->tm_min, tim->tm_sec);
|
||||
|
||||
return rtc_valid_tm(tim);
|
||||
}
|
||||
|
||||
static struct rtc_class_ops mcp795_rtc_ops = {
|
||||
.read_time = mcp795_read_time,
|
||||
.set_time = mcp795_set_time
|
||||
};
|
||||
|
||||
static int mcp795_probe(struct spi_device *spi)
|
||||
{
|
||||
struct rtc_device *rtc;
|
||||
int ret;
|
||||
|
||||
spi->mode = SPI_MODE_0;
|
||||
spi->bits_per_word = 8;
|
||||
ret = spi_setup(spi);
|
||||
if (ret) {
|
||||
dev_err(&spi->dev, "Unable to setup SPI\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* Start the oscillator */
|
||||
mcp795_rtcc_set_bits(&spi->dev, 0x01, MCP795_ST_BIT, MCP795_ST_BIT);
|
||||
/* Clear the 12 hour mode flag*/
|
||||
mcp795_rtcc_set_bits(&spi->dev, 0x03, MCP795_24_BIT, 0);
|
||||
|
||||
rtc = devm_rtc_device_register(&spi->dev, "rtc-mcp795",
|
||||
&mcp795_rtc_ops, THIS_MODULE);
|
||||
if (IS_ERR(rtc))
|
||||
return PTR_ERR(rtc);
|
||||
|
||||
spi_set_drvdata(spi, rtc);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct spi_driver mcp795_driver = {
|
||||
.driver = {
|
||||
.name = "rtc-mcp795",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = mcp795_probe,
|
||||
};
|
||||
|
||||
module_spi_driver(mcp795_driver);
|
||||
|
||||
MODULE_DESCRIPTION("MCP795 RTC SPI Driver");
|
||||
MODULE_AUTHOR("Josef Gajdusek <atx@atx.name>");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_ALIAS("spi:mcp795");
|
||||
Loading…
Reference in New Issue