mmc: sdhci-of-esdhc: add quirk to ignore command inhibit for data
For some controllers, in Present State Register, Data Line Active bit is not reliable for commands (such as CMD6, CMD7, CMD12, CMD28, CMD29, or CMD38) with busy signal. DLA affects Command with Data Inhibit bit. Therefore, software driver may not know the busy status in DLA/CDIHB. Futunately MMC core driver has already polled card status with CMD13 after sending any command with busy signal. So we can just ignore CDIHB never released issue for such controllers. This patch is to add a quirk to handle this. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
parent
b214fe592a
commit
1f1929f3f2
|
@ -82,6 +82,7 @@ struct sdhci_esdhc {
|
|||
bool quirk_limited_clk_division;
|
||||
bool quirk_unreliable_pulse_detection;
|
||||
bool quirk_fixup_tuning;
|
||||
bool quirk_ignore_data_inhibit;
|
||||
unsigned int peripheral_clock;
|
||||
const struct esdhc_clk_fixup *clk_fixup;
|
||||
u32 div_ratio;
|
||||
|
@ -148,6 +149,19 @@ static u32 esdhc_readl_fixup(struct sdhci_host *host,
|
|||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* Some controllers have unreliable Data Line Active
|
||||
* bit for commands with busy signal. This affects
|
||||
* Command Inhibit (data) bit. Just ignore it since
|
||||
* MMC core driver has already polled card status
|
||||
* with CMD13 after any command with busy siganl.
|
||||
*/
|
||||
if ((spec_reg == SDHCI_PRESENT_STATE) &&
|
||||
(esdhc->quirk_ignore_data_inhibit == true)) {
|
||||
ret = value & ~SDHCI_DATA_INHIBIT;
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = value;
|
||||
return ret;
|
||||
}
|
||||
|
@ -1115,12 +1129,14 @@ static int sdhci_esdhc_probe(struct platform_device *pdev)
|
|||
if (of_device_is_compatible(np, "fsl,ls1021a-esdhc"))
|
||||
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
|
||||
|
||||
esdhc->quirk_ignore_data_inhibit = false;
|
||||
if (of_device_is_compatible(np, "fsl,p2020-esdhc")) {
|
||||
/*
|
||||
* Freescale messed up with P2020 as it has a non-standard
|
||||
* host control register
|
||||
*/
|
||||
host->quirks2 |= SDHCI_QUIRK2_BROKEN_HOST_CONTROL;
|
||||
esdhc->quirk_ignore_data_inhibit = true;
|
||||
}
|
||||
|
||||
/* call to generic mmc_of_parse to support additional capabilities */
|
||||
|
|
Loading…
Reference in New Issue