arm64: dts: Amlogic updates for v5.2, round 2

- add display/gfx support for G12a boards
 - enable USB for g12a boards
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAly8ghgACgkQWTcYmtP7
 xmXqyg/9HtVrO5aNLEmGi3l/YySSH7fSp5BNnvTzlT8SpB1vBAKLXWjemVss2XVE
 QEE7d1UyUoXwgE4GoAyguuuj0Ov+JwYRTQb+OZKliALPlHfQQkklN8FKVMnDzEz7
 u1ivVqmoXzwqW32NW3a24AyGLgQXgJi2+ctAZSGNd+pLydwANLCB+Ffc1I4fTmW0
 kwLnqBgyVMxhbgRw6Blj9nh+ZlQOLwktpiMfrOwIpV0WLT3LZdRMrY1M/SnP+4+B
 Pq2BEzBAaHC5cNjQ3TjEj+nckXnrncJ0V6DepT+UIOC8L61rsb/tQAx8ecVVoHcW
 TTsQ3fewNcqIrKLRFpyNpXEAEAzlciwpV8lDczY5fLv5/j0MHiRSwBctj1pcK+CF
 Rsl2NygGZv0SuU0hDsDfEzVGLPjD1VYVGSJezWaaNzhjLw4sDUylBsKOcMNui4fW
 IUT3ahdjtvp03xjlGWAd1NI/MkYuu3RxJ2wR28vPEUGu2JEVpI8PtkR1FVqRIwBU
 Qd20x3bAn76zxMSWrsmDiTAa0+HMqjUbhzyeJxKPV5ON5k7RbmADrQ2rvxx+E4Uj
 FR3S6iulwaXDxIrvKZvTJDX3Myf2EL0bck5/XlKrD/B8tN5dCBgySA+SGHLhIiwZ
 XpCQmP6nLzZayeU4TX7jvAQdbhmR5GYCpO7SsIFTz7fJr6Vb8lM=
 =T6Im
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-dt64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: Amlogic updates for v5.2, round 2
- add display/gfx support for G12a boards
- enable USB for g12a boards

* tag 'amlogic-dt64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (26 commits)
  arm64: dts: meson-g12a-u200: Add support for Video Display
  arm64: dts: meson-g12a-sei510: Add support for Video Display
  arm64: dts: meson-g12a-x96-max: Add support for Video Display
  arm64: dts: meson-g12a: Add AO-CEC nodes
  arm64: dts: meson-g12a: Add VPU and HDMI related nodes
  arm64: dts: meson-g12a-x96-max: Enable USB
  arm64: dts: meson-g12a-u200: Enable USB
  arm64: dts: meson-g12a-sei510: Enable USB
  arm64: dts: meson-g12a-sei510: Add ADC Key and BT support
  arm64: dts: meson-g12a-u200: add regulators
  arm64: dts: meson: g12a: Add mali-g31 gpu node
  arm64: dts: meson: g12a: Add G12A USB nodes
  arm64: dts: meson: g12a: Add SAR ADC node
  dt-bindings: power: amlogic, meson-gx-pwrc: Add G12A compatible
  arm64: dts: meson-gxm: Add Mali-T820 node
  dt-bindings: gpu: mali-midgard: Add resets property
  dt-bindings: clock: meson8b: export the video decoder clocks
  dt-bindings: clock: meson8b: export the VPU clock
  dt-bindings: clock: g12a-aoclk: expose CLKID_AO_CTS_OSCIN
  dt-bindings: clock: meson8b: drop the "ABP" clock definition
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt

@@ -37,6 +37,20 @@ Optional properties:
 - operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt
   for details.
 
+- resets : Phandle of the GPU reset line.
+
+Vendor-specific bindings
+------------------------
+
+The Mali GPU is integrated very differently from one SoC to
+another. In order to accomodate those differences, you have the option
+to specify one more vendor-specific compatible, among:
+
+- "amlogic,meson-gxm-mali"
+  Required properties:
+  - resets : Should contain phandles of :
+    + GPU reset line
+    + GPU APB glue reset line
 
 Example for a Mali-T760:
 

Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt

@@ -16,7 +16,9 @@ Device Tree Bindings:
 ---------------------
 
 Required properties:
-- compatible: should be "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs
+- compatible: should be one of the following :
+	- "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs
+	- "amlogic,meson-g12a-pwrc-vpu" for the Meson G12A SoCs
 - #power-domain-cells: should be 0
 - amlogic,hhi-sysctrl: phandle to the HHI sysctrl node
 - resets: phandles to the reset lines needed for this power demain sequence

arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts

@@ -7,6 +7,7 @@
 
 #include "meson-g12a.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
 
 / {
@@ -17,6 +18,19 @@
 		serial0 = &uart_AO;
 	};
 
+	adc_keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-onoff {
+			label = "On/Off";
+			linux,code = <KEY_POWER>;
+			press-threshold-microvolt = <1700000>;
+		};
+	};
+
 	ao_5v: regulator-ao_5v {
 		compatible = "regulator-fixed";
 		regulator-name = "AO_5V";
@@ -30,6 +44,16 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
 	dc_in: regulator-dc_in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
@@ -47,6 +71,17 @@
 		regulator-always-on;
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
 	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x40000000>;
@@ -87,7 +122,55 @@
 		vin-supply = <&vddao_3v3>;
 		regulator-always-on;
 	};
+};
 
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
 };
 
 &uart_AO {
@@ -95,3 +178,8 @@
 	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
 };
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};

arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts

@@ -6,6 +6,8 @@
 /dts-v1/;
 
 #include "meson-g12a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
 
 / {
 	compatible = "amlogic,u200", "amlogic,g12a";
@@ -21,6 +23,137 @@
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	flash_1v8: regulator-flash_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "FLASH_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	main_12v: regulator-main_12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	usb_pwr_en: regulator-usb_pwr_en {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR_EN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
 };
 
 &uart_AO {
@@ -29,3 +162,15 @@
 	pinctrl-names = "default";
 };
 
+&usb {
+	status = "okay";
+	vbus-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy0 {
+	phy-supply = <&vcc_5v>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&vcc_5v>;
+};

arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts

@@ -24,6 +24,27 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
 	flash_1v8: regulator-flash_1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "FLASH_1V8";
@@ -90,6 +111,39 @@
 	};
 };
 
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 &uart_A {
 	status = "okay";
 	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
@@ -107,3 +161,8 @@
 	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
 };
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};

arch/arm64/boot/dts/amlogic/meson-g12a.dtsi

@@ -3,10 +3,13 @@
  * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
  */
 
+#include <dt-bindings/phy/phy.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/g12a-clkc.h>
+#include <dt-bindings/clock/g12a-aoclkc.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
 
 / {
 	compatible = "amlogic,g12a";
@@ -106,6 +109,37 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>;
 
+			hdmi_tx: hdmi-tx@0 {
+				compatible = "amlogic,meson-g12a-dw-hdmi";
+				reg = <0x0 0x0 0x0 0x10000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+				resets = <&reset RESET_HDMITX_CAPB3>,
+					 <&reset RESET_HDMITX_PHY>,
+					 <&reset RESET_HDMITX>;
+				reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+				clocks = <&clkc CLKID_HDMI>,
+					 <&clkc CLKID_HTX_PCLK>,
+					 <&clkc CLKID_VPU_INTR>;
+				clock-names = "isfr", "iahb", "venci";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+
+				/* VPU VENC Input */
+				hdmi_tx_venc_port: port@0 {
+					reg = <0>;
+
+					hdmi_tx_in: endpoint {
+						remote-endpoint = <&hdmi_tx_out>;
+					};
+				};
+
+				/* TMDS Output */
+				hdmi_tx_tmds_port: port@1 {
+					reg = <1>;
+				};
+			};
+
 			periphs: bus@34400 {
 				compatible = "simple-bus";
 				reg = <0x0 0x34400 0x0 0x400>;
@@ -135,6 +169,39 @@
 						gpio-ranges = <&periphs_pinctrl 0 0 86>;
 					};
 
+					cec_ao_a_h_pins: cec_ao_a_h {
+						mux {
+							groups = "cec_ao_a_h";
+							function = "cec_ao_a_h";
+							bias-disable;
+						};
+					};
+
+					cec_ao_b_h_pins: cec_ao_b_h {
+						mux {
+							groups = "cec_ao_b_h";
+							function = "cec_ao_b_h";
+							bias-disable;
+						};
+					};
+
+					hdmitx_ddc_pins: hdmitx_ddc {
+						mux {
+							groups = "hdmitx_sda",
+								 "hdmitx_sck";
+							function = "hdmitx";
+							bias-disable;
+						};
+					};
+
+					hdmitx_hpd_pins: hdmitx_hpd {
+						mux {
+							groups = "hdmitx_hpd_in";
+							function = "hdmitx";
+							bias-disable;
+						};
+					};
+
 					uart_a_pins: uart-a {
 						mux {
 							groups = "uart_a_tx",
@@ -182,6 +249,39 @@
 				};
 			};
 
+			usb2_phy0: phy@36000 {
+				compatible = "amlogic,g12a-usb2-phy";
+				reg = <0x0 0x36000 0x0 0x2000>;
+				clocks = <&xtal>;
+				clock-names = "xtal";
+				resets = <&reset RESET_USB_PHY20>;
+				reset-names = "phy";
+				#phy-cells = <0>;
+			};
+
+			dmc: bus@38000 {
+				compatible = "simple-bus";
+				reg = <0x0 0x38000 0x0 0x400>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>;
+
+				canvas: video-lut@48 {
+					compatible = "amlogic,canvas";
+					reg = <0x0 0x48 0x0 0x14>;
+				};
+			};
+
+			usb2_phy1: phy@3a000 {
+				compatible = "amlogic,g12a-usb2-phy";
+				reg = <0x0 0x3a000 0x0 0x2000>;
+				clocks = <&xtal>;
+				clock-names = "xtal";
+				resets = <&reset RESET_USB_PHY21>;
+				reset-names = "phy";
+				#phy-cells = <0>;
+			};
+
 			hiu: bus@3c000 {
 				compatible = "simple-bus";
 				reg = <0x0 0x3c000 0x0 0x1400>;
@@ -202,6 +302,18 @@
 					};
 				};
 			};
+
+			usb3_pcie_phy: phy@46000 {
+				compatible = "amlogic,g12a-usb3-pcie-phy";
+				reg = <0x0 0x46000 0x0 0x2000>;
+				clocks = <&clkc CLKID_PCIE_PLL>;
+				clock-names = "ref_clk";
+				resets = <&reset RESET_PCIE_PHY>;
+				reset-names = "phy";
+				assigned-clocks = <&clkc CLKID_PCIE_PLL>;
+				assigned-clock-rates = <100000000>;
+				#phy-cells = <1>;
+			};
 		};
 
 		aobus: bus@ff800000 {
@@ -227,6 +339,50 @@
 					clock-names = "xtal", "mpeg-clk";
 				};
 
+				pwrc_vpu: power-controller-vpu {
+					compatible = "amlogic,meson-g12a-pwrc-vpu";
+					#power-domain-cells = <0>;
+					amlogic,hhi-sysctrl = <&hhi>;
+					resets = <&reset RESET_VIU>,
+						 <&reset RESET_VENC>,
+						 <&reset RESET_VCBUS>,
+						 <&reset RESET_BT656>,
+						 <&reset RESET_RDMA>,
+						 <&reset RESET_VENCI>,
+						 <&reset RESET_VENCP>,
+						 <&reset RESET_VDAC>,
+						 <&reset RESET_VDI6>,
+						 <&reset RESET_VENCL>,
+						 <&reset RESET_VID_LOCK>;
+					clocks = <&clkc CLKID_VPU>,
+						 <&clkc CLKID_VAPB>;
+					clock-names = "vpu", "vapb";
+					/*
+					 * VPU clocking is provided by two identical clock paths
+					 * VPU_0 and VPU_1 muxed to a single clock by a glitch
+					 * free mux to safely change frequency while running.
+					 * Same for VAPB but with a final gate after the glitch free mux.
+					 */
+					assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
+							  <&clkc CLKID_VPU_0>,
+							  <&clkc CLKID_VPU>, /* Glitch free mux */
+							  <&clkc CLKID_VAPB_0_SEL>,
+							  <&clkc CLKID_VAPB_0>,
+							  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
+					assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+								 <0>, /* Do Nothing */
+								 <&clkc CLKID_VPU_0>,
+								 <&clkc CLKID_FCLK_DIV4>,
+								 <0>, /* Do Nothing */
+								 <&clkc CLKID_VAPB_0>;
+					assigned-clock-rates = <0>, /* Do Nothing */
+							       <666666666>,
+							       <0>, /* Do Nothing */
+							       <0>, /* Do Nothing */
+							       <250000000>,
+							       <0>; /* Do Nothing */
+				};
+
 				ao_pinctrl: pinctrl@14 {
 					compatible = "amlogic,meson-g12a-aobus-pinctrl";
 					#address-cells = <2>;
@@ -265,12 +421,30 @@
 				};
 			};
 
+			cec_AO: cec@100 {
+				compatible = "amlogic,meson-gx-ao-cec";
+				reg = <0x0 0x00100 0x0 0x14>;
+				interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_AO CLKID_AO_CEC>;
+				clock-names = "core";
+				status = "disabled";
+			};
+
 			sec_AO: ao-secure@140 {
 				compatible = "amlogic,meson-gx-ao-secure", "syscon";
 				reg = <0x0 0x140 0x0 0x140>;
 				amlogic,has-chip-id;
 			};
 
+			cecb_AO: cec@280 {
+				compatible = "amlogic,meson-g12a-ao-cec";
+				reg = <0x0 0x00280 0x0 0x1c>;
+				interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_AO CLKID_AO_CTS_OSCIN>;
+				clock-names = "oscin";
+				status = "disabled";
+			};
+
 			uart_AO: serial@3000 {
 				compatible = "amlogic,meson-gx-uart",
 					     "amlogic,meson-ao-uart";
@@ -290,6 +464,46 @@
 				clock-names = "xtal", "pclk", "baud";
 				status = "disabled";
 			};
+
+			saradc: adc@9000 {
+				compatible = "amlogic,meson-g12a-saradc",
+					     "amlogic,meson-saradc";
+				reg = <0x0 0x9000 0x0 0x48>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_SAR_ADC>,
+					 <&clkc_AO CLKID_AO_SAR_ADC_CLK>,
+					 <&clkc_AO CLKID_AO_SAR_ADC_SEL>;
+				clock-names = "clkin", "core", "adc_clk", "adc_sel";
+				status = "disabled";
+			};
+		};
+
+		vpu: vpu@ff900000 {
+			compatible = "amlogic,meson-g12a-vpu";
+			reg = <0x0 0xff900000 0x0 0x100000>,
+			      <0x0 0xff63c000 0x0 0x1000>;
+			reg-names = "vpu", "hhi";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			amlogic,canvas = <&canvas>;
+			power-domains = <&pwrc_vpu>;
+
+			/* CVBS VDAC output port */
+			cvbs_vdac_port: port@0 {
+				reg = <0>;
+			};
+
+			/* HDMI-TX output port */
+			hdmi_tx_port: port@1 {
+				reg = <1>;
+
+				hdmi_tx_out: endpoint {
+					remote-endpoint = <&hdmi_tx_in>;
+				};
+			};
 		};
 
 		gic: interrupt-controller@ffc01000 {
@@ -351,6 +565,74 @@
 				status = "disabled";
 			};
 		};
+
+		usb: usb@ffe09000 {
+			status = "disabled";
+			compatible = "amlogic,meson-g12a-usb-ctrl";
+			reg = <0x0 0xffe09000 0x0 0xa0>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&clkc CLKID_USB>;
+			resets = <&reset RESET_USB>;
+
+			dr_mode = "otg";
+
+			phys = <&usb2_phy0>, <&usb2_phy1>,
+			       <&usb3_pcie_phy PHY_TYPE_USB3>;
+			phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0";
+
+			dwc2: usb@ff400000 {
+				compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
+				reg = <0x0 0xff400000 0x0 0x40000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+				clock-names = "ddr";
+				phys = <&usb2_phy1>;
+				dr_mode = "peripheral";
+				g-rx-fifo-size = <192>;
+				g-np-tx-fifo-size = <128>;
+				g-tx-fifo-size = <128 128 16 16 16>;
+			};
+
+			dwc3: usb@ff500000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xff500000 0x0 0x100000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,dis_u2_susphy_quirk;
+				snps,quirk-frame-length-adjustment;
+			};
+		};
+
+		mali: gpu@ffe40000 {
+			compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost";
+			reg = <0x0 0xffe40000 0x0 0x40000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gpu", "mmu", "job";
+			clocks = <&clkc CLKID_MALI>;
+			resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>;
+
+			/*
+			 * Mali clocking is provided by two identical clock paths
+			 * MALI_0 and MALI_1 muxed to a single clock by a glitch
+			 * free mux to safely change frequency while running.
+			 */
+			assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+					  <&clkc CLKID_MALI_0>,
+					  <&clkc CLKID_MALI>; /* Glitch free mux */
+			assigned-clock-parents = <&clkc CLKID_FCLK_DIV2P5>,
+						 <0>, /* Do Nothing */
+						 <&clkc CLKID_MALI_0>;
+			assigned-clock-rates = <0>, /* Do Nothing */
+					       <800000000>,
+					       <0>; /* Do Nothing */
+		};
 	};
 
 	timer {

arch/arm64/boot/dts/amlogic/meson-gxm.dtsi

@@ -91,6 +91,33 @@
 		reset-names = "phy";
 		status = "okay";
 	};
+
+	mali: gpu@c0000 {
+		compatible = "amlogic,meson-gxm-mali", "arm,mali-t820";
+		reg = <0x0 0xc0000 0x0 0x40000>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gpu", "mmu", "job";
+		clocks = <&clkc CLKID_MALI>;
+		resets = <&reset RESET_MALI_CAPB3>, <&reset RESET_MALI>;
+
+		/*
+		 * Mali clocking is provided by two identical clock paths
+		 * MALI_0 and MALI_1 muxed to a single clock by a glitch
+		 * free mux to safely change frequency while running.
+		 */
+		assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+				  <&clkc CLKID_MALI_0>,
+				  <&clkc CLKID_MALI>; /* Glitch free mux */
+		assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+					 <0>, /* Do Nothing */
+					 <&clkc CLKID_MALI_0>;
+		assigned-clock-rates = <0>, /* Do Nothing */
+				       <666666666>,
+				       <0>; /* Do Nothing */
+	};
 };
 
 &clkc_AO {

drivers/clk/meson/axg-audio.h

@@ -60,6 +60,26 @@
 #define AUD_CLKID_MST5			6
 #define AUD_CLKID_MST6			7
 #define AUD_CLKID_MST7			8
+#define AUD_CLKID_SLV_SCLK0		9
+#define AUD_CLKID_SLV_SCLK1		10
+#define AUD_CLKID_SLV_SCLK2		11
+#define AUD_CLKID_SLV_SCLK3		12
+#define AUD_CLKID_SLV_SCLK4		13
+#define AUD_CLKID_SLV_SCLK5		14
+#define AUD_CLKID_SLV_SCLK6		15
+#define AUD_CLKID_SLV_SCLK7		16
+#define AUD_CLKID_SLV_SCLK8		17
+#define AUD_CLKID_SLV_SCLK9		18
+#define AUD_CLKID_SLV_LRCLK0		19
+#define AUD_CLKID_SLV_LRCLK1		20
+#define AUD_CLKID_SLV_LRCLK2		21
+#define AUD_CLKID_SLV_LRCLK3		22
+#define AUD_CLKID_SLV_LRCLK4		23
+#define AUD_CLKID_SLV_LRCLK5		24
+#define AUD_CLKID_SLV_LRCLK6		25
+#define AUD_CLKID_SLV_LRCLK7		26
+#define AUD_CLKID_SLV_LRCLK8		27
+#define AUD_CLKID_SLV_LRCLK9		28
 #define AUD_CLKID_MST_A_MCLK_SEL	59
 #define AUD_CLKID_MST_B_MCLK_SEL	60
 #define AUD_CLKID_MST_C_MCLK_SEL	61

drivers/clk/meson/g12a-aoclk.h

@@ -16,9 +16,7 @@
  * to expose, such as the internal muxes and dividers of composite clocks,
  * will remain defined here.
  */
-#define CLKID_AO_SAR_ADC_SEL	16
 #define CLKID_AO_SAR_ADC_DIV	17
-#define CLKID_AO_CTS_OSCIN	19
 #define CLKID_AO_32K_PRE	20
 #define CLKID_AO_32K_DIV	21
 #define CLKID_AO_32K_SEL	22

include/dt-bindings/clock/axg-audio-clkc.h

@@ -7,26 +7,6 @@
 #ifndef __AXG_AUDIO_CLKC_BINDINGS_H
 #define __AXG_AUDIO_CLKC_BINDINGS_H
 
-#define AUD_CLKID_SLV_SCLK0		9
-#define AUD_CLKID_SLV_SCLK1		10
-#define AUD_CLKID_SLV_SCLK2		11
-#define AUD_CLKID_SLV_SCLK3		12
-#define AUD_CLKID_SLV_SCLK4		13
-#define AUD_CLKID_SLV_SCLK5		14
-#define AUD_CLKID_SLV_SCLK6		15
-#define AUD_CLKID_SLV_SCLK7		16
-#define AUD_CLKID_SLV_SCLK8		17
-#define AUD_CLKID_SLV_SCLK9		18
-#define AUD_CLKID_SLV_LRCLK0		19
-#define AUD_CLKID_SLV_LRCLK1		20
-#define AUD_CLKID_SLV_LRCLK2		21
-#define AUD_CLKID_SLV_LRCLK3		22
-#define AUD_CLKID_SLV_LRCLK4		23
-#define AUD_CLKID_SLV_LRCLK5		24
-#define AUD_CLKID_SLV_LRCLK6		25
-#define AUD_CLKID_SLV_LRCLK7		26
-#define AUD_CLKID_SLV_LRCLK8		27
-#define AUD_CLKID_SLV_LRCLK9		28
 #define AUD_CLKID_DDR_ARB		29
 #define AUD_CLKID_PDM			30
 #define AUD_CLKID_TDMIN_A		31

include/dt-bindings/clock/g12a-aoclkc.h

@@ -26,7 +26,9 @@
 #define CLKID_AO_M4_FCLK	13
 #define CLKID_AO_M4_HCLK	14
 #define CLKID_AO_CLK81		15
+#define CLKID_AO_SAR_ADC_SEL	16
 #define CLKID_AO_SAR_ADC_CLK	18
+#define CLKID_AO_CTS_OSCIN	19
 #define CLKID_AO_32K		23
 #define CLKID_AO_CEC		27
 #define CLKID_AO_CTS_RTC_OSCIN	28

include/dt-bindings/clock/g12a-clkc.h

@@ -131,5 +131,10 @@
 #define CLKID_MALI_1				174
 #define CLKID_MALI				175
 #define CLKID_MPLL_5OM				177
+#define CLKID_CPU_CLK				187
+#define CLKID_PCIE_PLL				201
+#define CLKID_VDEC_1				204
+#define CLKID_VDEC_HEVC				207
+#define CLKID_VDEC_HEVCF			210
 
 #endif /* __G12A_CLKC_H */

include/dt-bindings/clock/meson8b-clkc.h

@@ -103,10 +103,14 @@
 #define CLKID_MPLL1		94
 #define CLKID_MPLL2		95
 #define CLKID_NAND_CLK		112
-#define CLKID_ABP		124
 #define CLKID_APB		124
 #define CLKID_PERIPH		126
 #define CLKID_AXI		128
 #define CLKID_L2_DRAM		130
+#define CLKID_VPU		190
+#define CLKID_VDEC_1		196
+#define CLKID_VDEC_HCODEC	199
+#define CLKID_VDEC_2		202
+#define CLKID_VDEC_HEVC		206
 
 #endif /* __MESON8B_CLKC_H */

include/dt-bindings/reset/amlogic,meson-g12a-reset.h

@@ -51,7 +51,10 @@
 #define RESET_SD_EMMC_A			44
 #define RESET_SD_EMMC_B			45
 #define RESET_SD_EMMC_C			46
-/*					47-60 */
+/*					47	*/
+#define RESET_USB_PHY20			48
+#define RESET_USB_PHY21			49
+/*					50-60	*/
 #define RESET_AUDIO_CODEC		61
 /*					62-63	*/
 /*	RESET2					*/