drm/amdgpu/powerplay: implement thermal control for tonga.
Implement thermal and fan control for tonga. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This commit is contained in:
Rex Zhu
Alex Deucher
parent
2dfea9cd1f
commit
1e4854e96c
|
|
@ -6,7 +6,7 @@ HARDWARE_MGR = hwmgr.o processpptables.o functiontables.o \
|
|||
hardwaremanager.o pp_acpi.o cz_hwmgr.o \
|
||||
cz_clockpowergating.o \
|
||||
tonga_processpptables.o ppatomctrl.o \
|
||||
tonga_hwmgr.o pppcielanes.o \
|
||||
tonga_hwmgr.o pppcielanes.o tonga_thermal.o\
|
||||
fiji_powertune.o fiji_hwmgr.o tonga_clockpowergating.o
|
||||
|
||||
AMD_PP_HWMGR = $(addprefix $(AMD_PP_PATH)/hwmgr/,$(HARDWARE_MGR))
|
||||
|
|
|
|||
|
|
@ -40,6 +40,7 @@
|
|||
#include "smumgr.h"
|
||||
#include "tonga_smumgr.h"
|
||||
#include "tonga_clockpowergating.h"
|
||||
#include "tonga_thermal.h"
|
||||
|
||||
#include "smu/smu_7_1_2_d.h"
|
||||
#include "smu/smu_7_1_2_sh_mask.h"
|
||||
|
|
@ -50,6 +51,9 @@
|
|||
#include "bif/bif_5_0_d.h"
|
||||
#include "bif/bif_5_0_sh_mask.h"
|
||||
|
||||
#include "cgs_linux.h"
|
||||
#include "eventmgr.h"
|
||||
|
||||
#define MC_CG_ARB_FREQ_F0 0x0a
|
||||
#define MC_CG_ARB_FREQ_F1 0x0b
|
||||
#define MC_CG_ARB_FREQ_F2 0x0c
|
||||
|
|
@ -5721,6 +5725,22 @@ static int tonga_set_power_state_tasks(struct pp_hwmgr *hwmgr, const void *input
|
|||
return result;
|
||||
}
|
||||
|
||||
/**
|
||||
* Set maximum target operating fan output PWM
|
||||
*
|
||||
* @param pHwMgr: the address of the powerplay hardware manager.
|
||||
* @param usMaxFanPwm: max operating fan PWM in percents
|
||||
* @return The response that came from the SMC.
|
||||
*/
|
||||
static int tonga_set_max_fan_pwm_output(struct pp_hwmgr *hwmgr, uint16_t us_max_fan_pwm)
|
||||
{
|
||||
hwmgr->thermal_controller.advanceFanControlParameters.usMaxFanPWM = us_max_fan_pwm;
|
||||
|
||||
if (phm_is_hw_access_blocked(hwmgr))
|
||||
return 0;
|
||||
|
||||
return (0 == smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, PPSMC_MSG_SetFanPwmMax, us_max_fan_pwm) ? 0 : -EINVAL);
|
||||
}
|
||||
|
||||
int tonga_notify_smc_display_config_after_ps_adjustment(struct pp_hwmgr *hwmgr)
|
||||
{
|
||||
|
|
@ -5799,6 +5819,122 @@ int tonga_display_configuration_changed_task(struct pp_hwmgr *hwmgr)
|
|||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* Set maximum target operating fan output RPM
|
||||
*
|
||||
* @param pHwMgr: the address of the powerplay hardware manager.
|
||||
* @param usMaxFanRpm: max operating fan RPM value.
|
||||
* @return The response that came from the SMC.
|
||||
*/
|
||||
static int tonga_set_max_fan_rpm_output(struct pp_hwmgr *hwmgr, uint16_t us_max_fan_pwm)
|
||||
{
|
||||
hwmgr->thermal_controller.advanceFanControlParameters.usMaxFanRPM = us_max_fan_pwm;
|
||||
|
||||
if (phm_is_hw_access_blocked(hwmgr))
|
||||
return 0;
|
||||
|
||||
return (0 == smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, PPSMC_MSG_SetFanRpmMax, us_max_fan_pwm) ? 0 : -EINVAL);
|
||||
}
|
||||
|
||||
uint32_t tonga_get_xclk(struct pp_hwmgr *hwmgr)
|
||||
{
|
||||
uint32_t reference_clock;
|
||||
uint32_t tc;
|
||||
uint32_t divide;
|
||||
|
||||
ATOM_FIRMWARE_INFO *fw_info;
|
||||
uint16_t size;
|
||||
uint8_t frev, crev;
|
||||
int index = GetIndexIntoMasterTable(DATA, FirmwareInfo);
|
||||
|
||||
tc = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_CLKPIN_CNTL_2, MUX_TCLK_TO_XCLK);
|
||||
|
||||
if (tc)
|
||||
return TCLK;
|
||||
|
||||
fw_info = (ATOM_FIRMWARE_INFO *)cgs_atom_get_data_table(hwmgr->device, index,
|
||||
&size, &frev, &crev);
|
||||
|
||||
if (!fw_info)
|
||||
return 0;
|
||||
|
||||
reference_clock = le16_to_cpu(fw_info->usMinPixelClockPLL_Output);
|
||||
|
||||
divide = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_CLKPIN_CNTL, XTALIN_DIVIDE);
|
||||
|
||||
if (0 != divide)
|
||||
return reference_clock / 4;
|
||||
|
||||
return reference_clock;
|
||||
}
|
||||
|
||||
int tonga_dpm_set_interrupt_state(void *private_data,
|
||||
unsigned src_id, unsigned type,
|
||||
int enabled)
|
||||
{
|
||||
uint32_t cg_thermal_int;
|
||||
struct pp_hwmgr *hwmgr = ((struct pp_eventmgr *)private_data)->hwmgr;
|
||||
|
||||
if (hwmgr == NULL)
|
||||
return -EINVAL;
|
||||
|
||||
switch (type) {
|
||||
case AMD_THERMAL_IRQ_LOW_TO_HIGH:
|
||||
if (enabled) {
|
||||
cg_thermal_int = cgs_read_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_THERMAL_INT);
|
||||
cg_thermal_int |= CG_THERMAL_INT_CTRL__THERM_INTH_MASK_MASK;
|
||||
cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_THERMAL_INT, cg_thermal_int);
|
||||
} else {
|
||||
cg_thermal_int = cgs_read_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_THERMAL_INT);
|
||||
cg_thermal_int &= ~CG_THERMAL_INT_CTRL__THERM_INTH_MASK_MASK;
|
||||
cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_THERMAL_INT, cg_thermal_int);
|
||||
}
|
||||
break;
|
||||
|
||||
case AMD_THERMAL_IRQ_HIGH_TO_LOW:
|
||||
if (enabled) {
|
||||
cg_thermal_int = cgs_read_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_THERMAL_INT);
|
||||
cg_thermal_int |= CG_THERMAL_INT_CTRL__THERM_INTL_MASK_MASK;
|
||||
cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_THERMAL_INT, cg_thermal_int);
|
||||
} else {
|
||||
cg_thermal_int = cgs_read_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_THERMAL_INT);
|
||||
cg_thermal_int &= ~CG_THERMAL_INT_CTRL__THERM_INTL_MASK_MASK;
|
||||
cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_THERMAL_INT, cg_thermal_int);
|
||||
}
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
int tonga_register_internal_thermal_interrupt(struct pp_hwmgr *hwmgr,
|
||||
const void *thermal_interrupt_info)
|
||||
{
|
||||
int result;
|
||||
const struct pp_interrupt_registration_info *info =
|
||||
(const struct pp_interrupt_registration_info *)thermal_interrupt_info;
|
||||
|
||||
if (info == NULL)
|
||||
return -EINVAL;
|
||||
|
||||
result = cgs_add_irq_source(hwmgr->device, 230, AMD_THERMAL_IRQ_LAST,
|
||||
tonga_dpm_set_interrupt_state,
|
||||
info->call_back, info->context);
|
||||
|
||||
if (result)
|
||||
return -EINVAL;
|
||||
|
||||
result = cgs_add_irq_source(hwmgr->device, 231, AMD_THERMAL_IRQ_LAST,
|
||||
tonga_dpm_set_interrupt_state,
|
||||
info->call_back, info->context);
|
||||
|
||||
if (result)
|
||||
return -EINVAL;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct pp_hwmgr_func tonga_hwmgr_funcs = {
|
||||
.backend_init = &tonga_hwmgr_backend_init,
|
||||
.backend_fini = &tonga_hwmgr_backend_fini,
|
||||
|
|
@ -5820,6 +5956,18 @@ static const struct pp_hwmgr_func tonga_hwmgr_funcs = {
|
|||
.disable_clock_power_gating = tonga_phm_disable_clock_power_gating,
|
||||
.notify_smc_display_config_after_ps_adjustment = tonga_notify_smc_display_config_after_ps_adjustment,
|
||||
.display_config_changed = tonga_display_configuration_changed_task,
|
||||
.set_max_fan_pwm_output = tonga_set_max_fan_pwm_output,
|
||||
.set_max_fan_rpm_output = tonga_set_max_fan_rpm_output,
|
||||
.get_temperature = tonga_thermal_get_temperature,
|
||||
.stop_thermal_controller = tonga_thermal_stop_thermal_controller,
|
||||
.get_fan_speed_info = tonga_fan_ctrl_get_fan_speed_info,
|
||||
.get_fan_speed_percent = tonga_fan_ctrl_get_fan_speed_percent,
|
||||
.set_fan_speed_percent = tonga_fan_ctrl_set_fan_speed_percent,
|
||||
.reset_fan_speed_to_default = tonga_fan_ctrl_reset_fan_speed_to_default,
|
||||
.get_fan_speed_rpm = tonga_fan_ctrl_get_fan_speed_rpm,
|
||||
.set_fan_speed_rpm = tonga_fan_ctrl_set_fan_speed_rpm,
|
||||
.uninitialize_thermal_controller = tonga_thermal_ctrl_uninitialize_thermal_controller,
|
||||
.register_internal_thermal_interrupt = tonga_register_internal_thermal_interrupt,
|
||||
};
|
||||
|
||||
int tonga_hwmgr_init(struct pp_hwmgr *hwmgr)
|
||||
|
|
@ -5834,7 +5982,7 @@ int tonga_hwmgr_init(struct pp_hwmgr *hwmgr)
|
|||
hwmgr->backend = data;
|
||||
hwmgr->hwmgr_func = &tonga_hwmgr_funcs;
|
||||
hwmgr->pptable_func = &tonga_pptable_funcs;
|
||||
|
||||
pp_tonga_thermal_initialize(hwmgr);
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -426,6 +426,7 @@ int tonga_update_vce_dpm(struct pp_hwmgr *hwmgr, const void *input);
|
|||
int tonga_update_uvd_dpm(struct pp_hwmgr *hwmgr, bool bgate);
|
||||
int tonga_enable_disable_uvd_dpm(struct pp_hwmgr *hwmgr, bool enable);
|
||||
int tonga_enable_disable_vce_dpm(struct pp_hwmgr *hwmgr, bool enable);
|
||||
uint32_t tonga_get_xclk(struct pp_hwmgr *hwmgr);
|
||||
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,587 @@
|
|||
/*
|
||||
* Copyright 2015 Advanced Micro Devices, Inc.
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a
|
||||
* copy of this software and associated documentation files (the "Software"),
|
||||
* to deal in the Software without restriction, including without limitation
|
||||
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
||||
* and/or sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
||||
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
|
||||
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
|
||||
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*
|
||||
*/
|
||||
|
||||
#include "tonga_thermal.h"
|
||||
#include "tonga_hwmgr.h"
|
||||
#include "tonga_smumgr.h"
|
||||
#include "tonga_ppsmc.h"
|
||||
#include "smu/smu_7_1_2_d.h"
|
||||
#include "smu/smu_7_1_2_sh_mask.h"
|
||||
|
||||
/**
|
||||
* Get Fan Speed Control Parameters.
|
||||
* @param hwmgr the address of the powerplay hardware manager.
|
||||
* @param pSpeed is the address of the structure where the result is to be placed.
|
||||
* @exception Always succeeds except if we cannot zero out the output structure.
|
||||
*/
|
||||
int tonga_fan_ctrl_get_fan_speed_info(struct pp_hwmgr *hwmgr, struct phm_fan_speed_info *fan_speed_info)
|
||||
{
|
||||
|
||||
if (hwmgr->thermal_controller.fanInfo.bNoFan)
|
||||
return 0;
|
||||
|
||||
fan_speed_info->supports_percent_read = true;
|
||||
fan_speed_info->supports_percent_write = true;
|
||||
fan_speed_info->min_percent = 0;
|
||||
fan_speed_info->max_percent = 100;
|
||||
|
||||
if (0 != hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution) {
|
||||
fan_speed_info->supports_rpm_read = true;
|
||||
fan_speed_info->supports_rpm_write = true;
|
||||
fan_speed_info->min_rpm = hwmgr->thermal_controller.fanInfo.ulMinRPM;
|
||||
fan_speed_info->max_rpm = hwmgr->thermal_controller.fanInfo.ulMaxRPM;
|
||||
} else {
|
||||
fan_speed_info->min_rpm = 0;
|
||||
fan_speed_info->max_rpm = 0;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* Get Fan Speed in percent.
|
||||
* @param hwmgr the address of the powerplay hardware manager.
|
||||
* @param pSpeed is the address of the structure where the result is to be placed.
|
||||
* @exception Fails is the 100% setting appears to be 0.
|
||||
*/
|
||||
int tonga_fan_ctrl_get_fan_speed_percent(struct pp_hwmgr *hwmgr, uint32_t *speed)
|
||||
{
|
||||
uint32_t duty100;
|
||||
uint32_t duty;
|
||||
uint64_t tmp64;
|
||||
|
||||
if (hwmgr->thermal_controller.fanInfo.bNoFan)
|
||||
return 0;
|
||||
|
||||
duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL1, FMAX_DUTY100);
|
||||
duty = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_STATUS, FDO_PWM_DUTY);
|
||||
|
||||
if (0 == duty100)
|
||||
return -EINVAL;
|
||||
|
||||
|
||||
tmp64 = (uint64_t)duty * 100;
|
||||
do_div(tmp64, duty100);
|
||||
*speed = (uint32_t)tmp64;
|
||||
|
||||
if (*speed > 100)
|
||||
*speed = 100;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* Get Fan Speed in RPM.
|
||||
* @param hwmgr the address of the powerplay hardware manager.
|
||||
* @param speed is the address of the structure where the result is to be placed.
|
||||
* @exception Returns not supported if no fan is found or if pulses per revolution are not set
|
||||
*/
|
||||
int tonga_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* Set Fan Speed Control to static mode, so that the user can decide what speed to use.
|
||||
* @param hwmgr the address of the powerplay hardware manager.
|
||||
* mode the fan control mode, 0 default, 1 by percent, 5, by RPM
|
||||
* @exception Should always succeed.
|
||||
*/
|
||||
int tonga_fan_ctrl_set_static_mode(struct pp_hwmgr *hwmgr, uint32_t mode)
|
||||
{
|
||||
|
||||
if (hwmgr->fan_ctrl_is_in_default_mode) {
|
||||
hwmgr->fan_ctrl_default_mode = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL2, FDO_PWM_MODE);
|
||||
hwmgr->tmin = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL2, TMIN);
|
||||
hwmgr->fan_ctrl_is_in_default_mode = false;
|
||||
}
|
||||
|
||||
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL2, TMIN, 0);
|
||||
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL2, FDO_PWM_MODE, mode);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* Reset Fan Speed Control to default mode.
|
||||
* @param hwmgr the address of the powerplay hardware manager.
|
||||
* @exception Should always succeed.
|
||||
*/
|
||||
int tonga_fan_ctrl_set_default_mode(struct pp_hwmgr *hwmgr)
|
||||
{
|
||||
if (hwmgr->fan_ctrl_is_in_default_mode) {
|
||||
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL2, FDO_PWM_MODE, hwmgr->fan_ctrl_default_mode);
|
||||
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL2, TMIN, hwmgr->tmin);
|
||||
hwmgr->fan_ctrl_is_in_default_mode = true;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int tonga_fan_ctrl_start_smc_fan_control(struct pp_hwmgr *hwmgr)
|
||||
{
|
||||
int result;
|
||||
|
||||
if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_ODFuzzyFanControlSupport)) {
|
||||
cgs_write_register(hwmgr->device, mmSMC_MSG_ARG_0, FAN_CONTROL_FUZZY);
|
||||
result = (smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_StartFanControl) == 0) ? 0 : -EINVAL;
|
||||
/*
|
||||
if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_FanSpeedInTableIsRPM))
|
||||
hwmgr->set_max_fan_rpm_output(hwmgr, hwmgr->thermal_controller.advanceFanControlParameters.usMaxFanRPM);
|
||||
else
|
||||
hwmgr->set_max_fan_pwm_output(hwmgr, hwmgr->thermal_controller.advanceFanControlParameters.usMaxFanPWM);
|
||||
*/
|
||||
} else {
|
||||
cgs_write_register(hwmgr->device, mmSMC_MSG_ARG_0, FAN_CONTROL_TABLE);
|
||||
result = (smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_StartFanControl) == 0) ? 0 : -EINVAL;
|
||||
}
|
||||
/* TO DO FOR SOME DEVICE ID 0X692b, send this msg return invalid command.
|
||||
if (result == 0 && hwmgr->thermal_controller.advanceFanControlParameters.ucTargetTemperature != 0)
|
||||
result = (0 == smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, PPSMC_MSG_SetFanTemperatureTarget, \
|
||||
hwmgr->thermal_controller.advanceFanControlParameters.ucTargetTemperature) ? 0 : -EINVAL);
|
||||
*/
|
||||
return result;
|
||||
}
|
||||
|
||||
|
||||
int tonga_fan_ctrl_stop_smc_fan_control(struct pp_hwmgr *hwmgr)
|
||||
{
|
||||
return (smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_StopFanControl) == 0) ? 0 : -EINVAL;
|
||||
}
|
||||
|
||||
/**
|
||||
* Set Fan Speed in percent.
|
||||
* @param hwmgr the address of the powerplay hardware manager.
|
||||
* @param speed is the percentage value (0% - 100%) to be set.
|
||||
* @exception Fails is the 100% setting appears to be 0.
|
||||
*/
|
||||
int tonga_fan_ctrl_set_fan_speed_percent(struct pp_hwmgr *hwmgr, uint32_t speed)
|
||||
{
|
||||
uint32_t duty100;
|
||||
uint32_t duty;
|
||||
uint64_t tmp64;
|
||||
|
||||
if (hwmgr->thermal_controller.fanInfo.bNoFan)
|
||||
return -EINVAL;
|
||||
|
||||
if (speed > 100)
|
||||
speed = 100;
|
||||
|
||||
if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_MicrocodeFanControl))
|
||||
tonga_fan_ctrl_stop_smc_fan_control(hwmgr);
|
||||
|
||||
duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL1, FMAX_DUTY100);
|
||||
|
||||
if (0 == duty100)
|
||||
return -EINVAL;
|
||||
|
||||
tmp64 = (uint64_t)speed * 100;
|
||||
do_div(tmp64, duty100);
|
||||
duty = (uint32_t)tmp64;
|
||||
|
||||
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL0, FDO_STATIC_DUTY, duty);
|
||||
|
||||
return tonga_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC);
|
||||
}
|
||||
|
||||
/**
|
||||
* Reset Fan Speed to default.
|
||||
* @param hwmgr the address of the powerplay hardware manager.
|
||||
* @exception Always succeeds.
|
||||
*/
|
||||
int tonga_fan_ctrl_reset_fan_speed_to_default(struct pp_hwmgr *hwmgr)
|
||||
{
|
||||
int result;
|
||||
|
||||
if (hwmgr->thermal_controller.fanInfo.bNoFan)
|
||||
return 0;
|
||||
|
||||
if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_MicrocodeFanControl)) {
|
||||
result = tonga_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC);
|
||||
if (0 == result)
|
||||
result = tonga_fan_ctrl_start_smc_fan_control(hwmgr);
|
||||
} else
|
||||
result = tonga_fan_ctrl_set_default_mode(hwmgr);
|
||||
|
||||
return result;
|
||||
}
|
||||
|
||||
/**
|
||||
* Set Fan Speed in RPM.
|
||||
* @param hwmgr the address of the powerplay hardware manager.
|
||||
* @param speed is the percentage value (min - max) to be set.
|
||||
* @exception Fails is the speed not lie between min and max.
|
||||
*/
|
||||
int tonga_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* Reads the remote temperature from the SIslands thermal controller.
|
||||
*
|
||||
* @param hwmgr The address of the hardware manager.
|
||||
*/
|
||||
int tonga_thermal_get_temperature(struct pp_hwmgr *hwmgr)
|
||||
{
|
||||
int temp;
|
||||
|
||||
temp = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_MULT_THERMAL_STATUS, CTF_TEMP);
|
||||
|
||||
/* Bit 9 means the reading is lower than the lowest usable value. */
|
||||
if (0 != (0x200 & temp))
|
||||
temp = TONGA_THERMAL_MAXIMUM_TEMP_READING;
|
||||
else
|
||||
temp = (temp & 0x1ff);
|
||||
|
||||
temp = temp * PP_TEMPERATURE_UNITS_PER_CENTIGRADES;
|
||||
|
||||
return temp;
|
||||
}
|
||||
|
||||
/**
|
||||
* Set the requested temperature range for high and low alert signals
|
||||
*
|
||||
* @param hwmgr The address of the hardware manager.
|
||||
* @param range Temperature range to be programmed for high and low alert signals
|
||||
* @exception PP_Result_BadInput if the input data is not valid.
|
||||
*/
|
||||
static int tonga_thermal_set_temperature_range(struct pp_hwmgr *hwmgr, uint32_t low_temp, uint32_t high_temp)
|
||||
{
|
||||
uint32_t low = TONGA_THERMAL_MINIMUM_ALERT_TEMP * PP_TEMPERATURE_UNITS_PER_CENTIGRADES;
|
||||
uint32_t high = TONGA_THERMAL_MAXIMUM_ALERT_TEMP * PP_TEMPERATURE_UNITS_PER_CENTIGRADES;
|
||||
|
||||
if (low < low_temp)
|
||||
low = low_temp;
|
||||
if (high > high_temp)
|
||||
high = high_temp;
|
||||
|
||||
if (low > high)
|
||||
return -EINVAL;
|
||||
|
||||
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_INT, DIG_THERM_INTH, (high / PP_TEMPERATURE_UNITS_PER_CENTIGRADES));
|
||||
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_INT, DIG_THERM_INTL, (low / PP_TEMPERATURE_UNITS_PER_CENTIGRADES));
|
||||
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_CTRL, DIG_THERM_DPM, (high / PP_TEMPERATURE_UNITS_PER_CENTIGRADES));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* Programs thermal controller one-time setting registers
|
||||
*
|
||||
* @param hwmgr The address of the hardware manager.
|
||||
*/
|
||||
static int tonga_thermal_initialize(struct pp_hwmgr *hwmgr)
|
||||
{
|
||||
if (0 != hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution)
|
||||
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||
CG_TACH_CTRL, EDGE_PER_REV,
|
||||
hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution - 1);
|
||||
|
||||
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL2, TACH_PWM_RESP_RATE, 0x28);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* Enable thermal alerts on the RV770 thermal controller.
|
||||
*
|
||||
* @param hwmgr The address of the hardware manager.
|
||||
*/
|
||||
static int tonga_thermal_enable_alert(struct pp_hwmgr *hwmgr)
|
||||
{
|
||||
uint32_t alert;
|
||||
|
||||
alert = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_INT, THERM_INT_MASK);
|
||||
alert &= ~(TONGA_THERMAL_HIGH_ALERT_MASK | TONGA_THERMAL_LOW_ALERT_MASK);
|
||||
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_INT, THERM_INT_MASK, alert);
|
||||
|
||||
/* send message to SMU to enable internal thermal interrupts */
|
||||
return (smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_MSG_Thermal_Cntl_Enable) == 0) ? 0 : -1;
|
||||
}
|
||||
|
||||
/**
|
||||
* Disable thermal alerts on the RV770 thermal controller.
|
||||
* @param hwmgr The address of the hardware manager.
|
||||
*/
|
||||
static int tonga_thermal_disable_alert(struct pp_hwmgr *hwmgr)
|
||||
{
|
||||
uint32_t alert;
|
||||
|
||||
alert = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_INT, THERM_INT_MASK);
|
||||
alert |= (TONGA_THERMAL_HIGH_ALERT_MASK | TONGA_THERMAL_LOW_ALERT_MASK);
|
||||
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_INT, THERM_INT_MASK, alert);
|
||||
|
||||
/* send message to SMU to disable internal thermal interrupts */
|
||||
return (smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_MSG_Thermal_Cntl_Disable) == 0) ? 0 : -1;
|
||||
}
|
||||
|
||||
/**
|
||||
* Uninitialize the thermal controller.
|
||||
* Currently just disables alerts.
|
||||
* @param hwmgr The address of the hardware manager.
|
||||
*/
|
||||
int tonga_thermal_stop_thermal_controller(struct pp_hwmgr *hwmgr)
|
||||
{
|
||||
int result = tonga_thermal_disable_alert(hwmgr);
|
||||
|
||||
if (hwmgr->thermal_controller.fanInfo.bNoFan)
|
||||
tonga_fan_ctrl_set_default_mode(hwmgr);
|
||||
|
||||
return result;
|
||||
}
|
||||
|
||||
/**
|
||||
* Set up the fan table to control the fan using the SMC.
|
||||
* @param hwmgr the address of the powerplay hardware manager.
|
||||
* @param pInput the pointer to input data
|
||||
* @param pOutput the pointer to output data
|
||||
* @param pStorage the pointer to temporary storage
|
||||
* @param Result the last failure code
|
||||
* @return result from set temperature range routine
|
||||
*/
|
||||
int tf_tonga_thermal_setup_fan_table(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result)
|
||||
{
|
||||
struct tonga_hwmgr *data = (struct tonga_hwmgr *)(hwmgr->backend);
|
||||
SMU72_Discrete_FanTable fan_table = { FDO_MODE_HARDWARE };
|
||||
uint32_t duty100;
|
||||
uint32_t t_diff1, t_diff2, pwm_diff1, pwm_diff2;
|
||||
uint16_t fdo_min, slope1, slope2;
|
||||
uint32_t reference_clock;
|
||||
int res;
|
||||
uint64_t tmp64;
|
||||
|
||||
if (0 == data->fan_table_start) {
|
||||
phm_cap_unset(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_MicrocodeFanControl);
|
||||
return 0;
|
||||
}
|
||||
|
||||
duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL1, FMAX_DUTY100);
|
||||
|
||||
if (0 == duty100) {
|
||||
phm_cap_unset(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_MicrocodeFanControl);
|
||||
return 0;
|
||||
}
|
||||
|
||||
tmp64 = hwmgr->thermal_controller.advanceFanControlParameters.usPWMMin * duty100;
|
||||
do_div(tmp64, 10000);
|
||||
fdo_min = (uint16_t)tmp64;
|
||||
|
||||
t_diff1 = hwmgr->thermal_controller.advanceFanControlParameters.usTMed - hwmgr->thermal_controller.advanceFanControlParameters.usTMin;
|
||||
t_diff2 = hwmgr->thermal_controller.advanceFanControlParameters.usTHigh - hwmgr->thermal_controller.advanceFanControlParameters.usTMed;
|
||||
|
||||
pwm_diff1 = hwmgr->thermal_controller.advanceFanControlParameters.usPWMMed - hwmgr->thermal_controller.advanceFanControlParameters.usPWMMin;
|
||||
pwm_diff2 = hwmgr->thermal_controller.advanceFanControlParameters.usPWMHigh - hwmgr->thermal_controller.advanceFanControlParameters.usPWMMed;
|
||||
|
||||
slope1 = (uint16_t)((50 + ((16 * duty100 * pwm_diff1) / t_diff1)) / 100);
|
||||
slope2 = (uint16_t)((50 + ((16 * duty100 * pwm_diff2) / t_diff2)) / 100);
|
||||
|
||||
fan_table.TempMin = cpu_to_be16((50 + hwmgr->thermal_controller.advanceFanControlParameters.usTMin) / 100);
|
||||
fan_table.TempMed = cpu_to_be16((50 + hwmgr->thermal_controller.advanceFanControlParameters.usTMed) / 100);
|
||||
fan_table.TempMax = cpu_to_be16((50 + hwmgr->thermal_controller.advanceFanControlParameters.usTMax) / 100);
|
||||
|
||||
fan_table.Slope1 = cpu_to_be16(slope1);
|
||||
fan_table.Slope2 = cpu_to_be16(slope2);
|
||||
|
||||
fan_table.FdoMin = cpu_to_be16(fdo_min);
|
||||
|
||||
fan_table.HystDown = cpu_to_be16(hwmgr->thermal_controller.advanceFanControlParameters.ucTHyst);
|
||||
|
||||
fan_table.HystUp = cpu_to_be16(1);
|
||||
|
||||
fan_table.HystSlope = cpu_to_be16(1);
|
||||
|
||||
fan_table.TempRespLim = cpu_to_be16(5);
|
||||
|
||||
reference_clock = tonga_get_xclk(hwmgr);
|
||||
|
||||
fan_table.RefreshPeriod = cpu_to_be32((hwmgr->thermal_controller.advanceFanControlParameters.ulCycleDelay * reference_clock) / 1600);
|
||||
|
||||
fan_table.FdoMax = cpu_to_be16((uint16_t)duty100);
|
||||
|
||||
fan_table.TempSrc = (uint8_t)PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_MULT_THERMAL_CTRL, TEMP_SEL);
|
||||
|
||||
fan_table.FanControl_GL_Flag = 1;
|
||||
|
||||
res = tonga_copy_bytes_to_smc(hwmgr->smumgr, data->fan_table_start, (uint8_t *)&fan_table, (uint32_t)sizeof(fan_table), data->sram_end);
|
||||
/* TO DO FOR SOME DEVICE ID 0X692b, send this msg return invalid command.
|
||||
if (res == 0 && hwmgr->thermal_controller.advanceFanControlParameters.ucMinimumPWMLimit != 0)
|
||||
res = (0 == smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, PPSMC_MSG_SetFanMinPwm, \
|
||||
hwmgr->thermal_controller.advanceFanControlParameters.ucMinimumPWMLimit) ? 0 : -1);
|
||||
|
||||
if (res == 0 && hwmgr->thermal_controller.advanceFanControlParameters.ulMinFanSCLKAcousticLimit != 0)
|
||||
res = (0 == smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, PPSMC_MSG_SetFanSclkTarget, \
|
||||
hwmgr->thermal_controller.advanceFanControlParameters.ulMinFanSCLKAcousticLimit) ? 0 : -1);
|
||||
|
||||
if (0 != res)
|
||||
phm_cap_unset(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_MicrocodeFanControl);
|
||||
*/
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* Start the fan control on the SMC.
|
||||
* @param hwmgr the address of the powerplay hardware manager.
|
||||
* @param pInput the pointer to input data
|
||||
* @param pOutput the pointer to output data
|
||||
* @param pStorage the pointer to temporary storage
|
||||
* @param Result the last failure code
|
||||
* @return result from set temperature range routine
|
||||
*/
|
||||
int tf_tonga_thermal_start_smc_fan_control(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result)
|
||||
{
|
||||
/* If the fantable setup has failed we could have disabled PHM_PlatformCaps_MicrocodeFanControl even after this function was included in the table.
|
||||
* Make sure that we still think controlling the fan is OK.
|
||||
*/
|
||||
if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_MicrocodeFanControl)) {
|
||||
tonga_fan_ctrl_start_smc_fan_control(hwmgr);
|
||||
tonga_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* Set temperature range for high and low alerts
|
||||
* @param hwmgr the address of the powerplay hardware manager.
|
||||
* @param pInput the pointer to input data
|
||||
* @param pOutput the pointer to output data
|
||||
* @param pStorage the pointer to temporary storage
|
||||
* @param Result the last failure code
|
||||
* @return result from set temperature range routine
|
||||
*/
|
||||
int tf_tonga_thermal_set_temperature_range(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result)
|
||||
{
|
||||
struct PP_TemperatureRange *range = (struct PP_TemperatureRange *)input;
|
||||
|
||||
if (range == NULL)
|
||||
return -EINVAL;
|
||||
|
||||
return tonga_thermal_set_temperature_range(hwmgr, range->min, range->max);
|
||||
}
|
||||
|
||||
/**
|
||||
* Programs one-time setting registers
|
||||
* @param hwmgr the address of the powerplay hardware manager.
|
||||
* @param pInput the pointer to input data
|
||||
* @param pOutput the pointer to output data
|
||||
* @param pStorage the pointer to temporary storage
|
||||
* @param Result the last failure code
|
||||
* @return result from initialize thermal controller routine
|
||||
*/
|
||||
int tf_tonga_thermal_initialize(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result)
|
||||
{
|
||||
return tonga_thermal_initialize(hwmgr);
|
||||
}
|
||||
|
||||
/**
|
||||
* Enable high and low alerts
|
||||
* @param hwmgr the address of the powerplay hardware manager.
|
||||
* @param pInput the pointer to input data
|
||||
* @param pOutput the pointer to output data
|
||||
* @param pStorage the pointer to temporary storage
|
||||
* @param Result the last failure code
|
||||
* @return result from enable alert routine
|
||||
*/
|
||||
int tf_tonga_thermal_enable_alert(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result)
|
||||
{
|
||||
return tonga_thermal_enable_alert(hwmgr);
|
||||
}
|
||||
|
||||
/**
|
||||
* Disable high and low alerts
|
||||
* @param hwmgr the address of the powerplay hardware manager.
|
||||
* @param pInput the pointer to input data
|
||||
* @param pOutput the pointer to output data
|
||||
* @param pStorage the pointer to temporary storage
|
||||
* @param Result the last failure code
|
||||
* @return result from disable alert routine
|
||||
*/
|
||||
static int tf_tonga_thermal_disable_alert(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result)
|
||||
{
|
||||
return tonga_thermal_disable_alert(hwmgr);
|
||||
}
|
||||
|
||||
static struct phm_master_table_item tonga_thermal_start_thermal_controller_master_list[] = {
|
||||
{ NULL, tf_tonga_thermal_initialize },
|
||||
{ NULL, tf_tonga_thermal_set_temperature_range },
|
||||
{ NULL, tf_tonga_thermal_enable_alert },
|
||||
/* We should restrict performance levels to low before we halt the SMC.
|
||||
* On the other hand we are still in boot state when we do this so it would be pointless.
|
||||
* If this assumption changes we have to revisit this table.
|
||||
*/
|
||||
{ NULL, tf_tonga_thermal_setup_fan_table},
|
||||
{ NULL, tf_tonga_thermal_start_smc_fan_control},
|
||||
{ NULL, NULL }
|
||||
};
|
||||
|
||||
static struct phm_master_table_header tonga_thermal_start_thermal_controller_master = {
|
||||
0,
|
||||
PHM_MasterTableFlag_None,
|
||||
tonga_thermal_start_thermal_controller_master_list
|
||||
};
|
||||
|
||||
static struct phm_master_table_item tonga_thermal_set_temperature_range_master_list[] = {
|
||||
{ NULL, tf_tonga_thermal_disable_alert},
|
||||
{ NULL, tf_tonga_thermal_set_temperature_range},
|
||||
{ NULL, tf_tonga_thermal_enable_alert},
|
||||
{ NULL, NULL }
|
||||
};
|
||||
|
||||
struct phm_master_table_header tonga_thermal_set_temperature_range_master = {
|
||||
0,
|
||||
PHM_MasterTableFlag_None,
|
||||
tonga_thermal_set_temperature_range_master_list
|
||||
};
|
||||
|
||||
int tonga_thermal_ctrl_uninitialize_thermal_controller(struct pp_hwmgr *hwmgr)
|
||||
{
|
||||
if (!hwmgr->thermal_controller.fanInfo.bNoFan)
|
||||
tonga_fan_ctrl_set_default_mode(hwmgr);
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* Initializes the thermal controller related functions in the Hardware Manager structure.
|
||||
* @param hwmgr The address of the hardware manager.
|
||||
* @exception Any error code from the low-level communication.
|
||||
*/
|
||||
int pp_tonga_thermal_initialize(struct pp_hwmgr *hwmgr)
|
||||
{
|
||||
int result;
|
||||
|
||||
result = phm_construct_table(hwmgr, &tonga_thermal_set_temperature_range_master, &(hwmgr->set_temperature_range));
|
||||
|
||||
if (0 == result) {
|
||||
result = phm_construct_table(hwmgr,
|
||||
&tonga_thermal_start_thermal_controller_master,
|
||||
&(hwmgr->start_thermal_controller));
|
||||
if (0 != result)
|
||||
phm_destroy_table(hwmgr, &(hwmgr->set_temperature_range));
|
||||
}
|
||||
|
||||
if (0 == result)
|
||||
hwmgr->fan_ctrl_is_in_default_mode = true;
|
||||
return result;
|
||||
}
|
||||
|
||||
|
|
@ -0,0 +1,60 @@
|
|||
/*
|
||||
* Copyright 2015 Advanced Micro Devices, Inc.
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a
|
||||
* copy of this software and associated documentation files (the "Software"),
|
||||
* to deal in the Software without restriction, including without limitation
|
||||
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
||||
* and/or sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
||||
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
|
||||
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
|
||||
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef TONGA_THERMAL_H
|
||||
#define TONGA_THERMAL_H
|
||||
|
||||
#include "hwmgr.h"
|
||||
|
||||
#define TONGA_THERMAL_HIGH_ALERT_MASK 0x1
|
||||
#define TONGA_THERMAL_LOW_ALERT_MASK 0x2
|
||||
|
||||
#define TONGA_THERMAL_MINIMUM_TEMP_READING -256
|
||||
#define TONGA_THERMAL_MAXIMUM_TEMP_READING 255
|
||||
|
||||
#define TONGA_THERMAL_MINIMUM_ALERT_TEMP 0
|
||||
#define TONGA_THERMAL_MAXIMUM_ALERT_TEMP 255
|
||||
|
||||
#define FDO_PWM_MODE_STATIC 1
|
||||
#define FDO_PWM_MODE_STATIC_RPM 5
|
||||
|
||||
|
||||
extern int tf_tonga_thermal_initialize(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result);
|
||||
extern int tf_tonga_thermal_set_temperature_range(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result);
|
||||
extern int tf_tonga_thermal_enable_alert(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result);
|
||||
|
||||
extern int tonga_thermal_get_temperature(struct pp_hwmgr *hwmgr);
|
||||
extern int tonga_thermal_stop_thermal_controller(struct pp_hwmgr *hwmgr);
|
||||
extern int tonga_fan_ctrl_get_fan_speed_info(struct pp_hwmgr *hwmgr, struct phm_fan_speed_info *fan_speed_info);
|
||||
extern int tonga_fan_ctrl_get_fan_speed_percent(struct pp_hwmgr *hwmgr, uint32_t *speed);
|
||||
extern int tonga_fan_ctrl_set_default_mode(struct pp_hwmgr *hwmgr);
|
||||
extern int tonga_fan_ctrl_set_static_mode(struct pp_hwmgr *hwmgr, uint32_t mode);
|
||||
extern int tonga_fan_ctrl_set_fan_speed_percent(struct pp_hwmgr *hwmgr, uint32_t speed);
|
||||
extern int tonga_fan_ctrl_reset_fan_speed_to_default(struct pp_hwmgr *hwmgr);
|
||||
extern int pp_tonga_thermal_initialize(struct pp_hwmgr *hwmgr);
|
||||
extern int tonga_thermal_ctrl_uninitialize_thermal_controller(struct pp_hwmgr *hwmgr);
|
||||
extern int tonga_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed);
|
||||
extern int tonga_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed);
|
||||
|
||||
#endif
|
||||
|
||||
Loading…
Reference in New Issue