UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

Char/Misc driver fixes for 5.2-rc4 

Here are some small char and misc driver fixes for 5.2-rc4 to resolve a
 number of reported issues.
 
 The most "notable" one here is the kernel headers in proc^Wsysfs fixes.
 Those changes move the header file info into sysfs and fixes the build
 issues that you reported.
 
 Other than that, a bunch of small habanalabs driver fixes, some fpga
 driver fixes, and a few other tiny driver fixes.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXPuEVg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yma0QCfVPa7r1rHqljz1UgvjKJTzVg8g9wAn1W1mddx
 MIlG+0+ZnBdaPzyzoY1O
 =0LJD
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes for 5.2-rc4 to resolve
  a number of reported issues.

  The most "notable" one here is the kernel headers in proc^Wsysfs
  fixes. Those changes move the header file info into sysfs and fixes
  the build issues that you reported.

  Other than that, a bunch of small habanalabs driver fixes, some fpga
  driver fixes, and a few other tiny driver fixes.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  habanalabs: Read upper bits of trace buffer from RWPHI
  habanalabs: Fix virtual address access via debugfs for 2MB pages
  fpga: zynqmp-fpga: Correctly handle error pointer
  habanalabs: fix bug in checking huge page optimization
  habanalabs: Avoid using a non-initialized MMU cache mutex
  habanalabs: fix debugfs code
  uapi/habanalabs: add opcode for enable/disable device debug mode
  habanalabs: halt debug engines on user process close
  test_firmware: Use correct snprintf() limit
  genwqe: Prevent an integer overflow in the ioctl
  parport: Fix mem leak in parport_register_dev_model
  fpga: dfl: expand minor range when registering chrdev region
  fpga: dfl: Add lockdep classes for pdata->lock
  fpga: dfl: afu: Pass the correct device to dma_mapping_error()
  fpga: stratix10-soc: fix use-after-free on s10_init()
  w1: ds2408: Fix typo after 49695ac468 (reset on output_write retry with readback)
  kheaders: Do not regenerate archive if config is not changed
  kheaders: Move from proc to sysfs
  lkdtm/bugs: Adjust recursion test to avoid elision
  lkdtm/usercopy: Moves the KERNEL_DS test to non-canonical
This commit is contained in:
Linus Torvalds 2019-06-08 12:50:36 -07:00
parent 902b2edfca e7bf2ce837
commit 1ce2c85137
27 changed files with 191 additions and 130 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/fpga/dfl-afu-dma-region.c
View File

@ -399,7 +399,7 @@ int afu_dma_map_region(struct dfl_feature_platform_data *pdata,
region->pages[0], 0,
region->length,
DMA_BIDIRECTIONAL);
if (dma_mapping_error(&pdata->dev->dev, region->iova)) {
if (dma_mapping_error(dfl_fpga_pdata_to_parent(pdata), region->iova)) {
dev_err(&pdata->dev->dev, "failed to map for dma\n");
ret = -EFAULT;
goto unpin_pages;

22
drivers/fpga/dfl.c
View File

@ -40,6 +40,13 @@ enum dfl_fpga_devt_type {
DFL_FPGA_DEVT_MAX,
};
static struct lock_class_key dfl_pdata_keys[DFL_ID_MAX];
static const char *dfl_pdata_key_strings[DFL_ID_MAX] = {
"dfl-fme-pdata",
"dfl-port-pdata",
};
/**
* dfl_dev_info - dfl feature device information.
* @name: name string of the feature platform device.
@ -315,7 +322,7 @@ static void dfl_chardev_uinit(void)
for (i = 0; i < DFL_FPGA_DEVT_MAX; i++)
if (MAJOR(dfl_chrdevs[i].devt)) {
unregister_chrdev_region(dfl_chrdevs[i].devt,
MINORMASK);
MINORMASK + 1);
dfl_chrdevs[i].devt = MKDEV(0, 0);
}
}
@ -325,8 +332,8 @@ static int dfl_chardev_init(void)
int i, ret;
for (i = 0; i < DFL_FPGA_DEVT_MAX; i++) {
ret = alloc_chrdev_region(&dfl_chrdevs[i].devt, 0, MINORMASK,
dfl_chrdevs[i].name);
ret = alloc_chrdev_region(&dfl_chrdevs[i].devt, 0,
MINORMASK + 1, dfl_chrdevs[i].name);
if (ret)
goto exit;
}
@ -443,11 +450,16 @@ static int build_info_commit_dev(struct build_feature_devs_info *binfo)
struct platform_device *fdev = binfo->feature_dev;
struct dfl_feature_platform_data *pdata;
struct dfl_feature_info *finfo, *p;
enum dfl_id_type type;
int ret, index = 0;
if (!fdev)
return 0;
type = feature_dev_id_type(fdev);
if (WARN_ON_ONCE(type >= DFL_ID_MAX))
return -EINVAL;
/*
* we do not need to care for the memory which is associated with
* the platform device. After calling platform_device_unregister(),
@ -463,6 +475,8 @@ static int build_info_commit_dev(struct build_feature_devs_info *binfo)
pdata->num = binfo->feature_num;
pdata->dfl_cdev = binfo->cdev;
mutex_init(&pdata->lock);
lockdep_set_class_and_name(&pdata->lock, &dfl_pdata_keys[type],
dfl_pdata_key_strings[type]);
/*
* the count should be initialized to 0 to make sure
@ -497,7 +511,7 @@ static int build_info_commit_dev(struct build_feature_devs_info *binfo)
ret = platform_device_add(binfo->feature_dev);
if (!ret) {
if (feature_dev_id_type(binfo->feature_dev) == PORT_ID)
if (type == PORT_ID)
dfl_fpga_cdev_add_port_dev(binfo->cdev,
binfo->feature_dev);
else

6
drivers/fpga/stratix10-soc.c
View File

@ -507,12 +507,16 @@ static int __init s10_init(void)
if (!fw_np)
return -ENODEV;
of_node_get(fw_np);
np = of_find_matching_node(fw_np, s10_of_match);
if (!np)
if (!np) {
of_node_put(fw_np);
return -ENODEV;
}
of_node_put(np);
ret = of_platform_populate(fw_np, s10_of_match, NULL, NULL);
of_node_put(fw_np);
if (ret)
return ret;

4
drivers/fpga/zynqmp-fpga.c
View File

@ -47,7 +47,7 @@ static int zynqmp_fpga_ops_write(struct fpga_manager *mgr,
char *kbuf;
int ret;
if (!eemi_ops || !eemi_ops->fpga_load)
if (IS_ERR_OR_NULL(eemi_ops) || !eemi_ops->fpga_load)
return -ENXIO;
priv = mgr->priv;
@ -81,7 +81,7 @@ static enum fpga_mgr_states zynqmp_fpga_ops_state(struct fpga_manager *mgr)
const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
u32 status;
if (!eemi_ops || !eemi_ops->fpga_get_status)
if (IS_ERR_OR_NULL(eemi_ops) || !eemi_ops->fpga_get_status)
return FPGA_MGR_STATE_UNKNOWN;
eemi_ops->fpga_get_status(&status);

2
drivers/misc/genwqe/card_dev.c
View File

@ -780,6 +780,8 @@ static int genwqe_pin_mem(struct genwqe_file *cfile, struct genwqe_mem *m)
if ((m->addr == 0x0) || (m->size == 0))
return -EINVAL;
if (m->size > ULONG_MAX - PAGE_SIZE - (m->addr & ~PAGE_MASK))
return -EINVAL;
map_addr = (m->addr & PAGE_MASK);
map_size = round_up(m->size + (m->addr & ~PAGE_MASK), PAGE_SIZE);

4
drivers/misc/genwqe/card_utils.c
View File

@ -586,6 +586,10 @@ int genwqe_user_vmap(struct genwqe_dev *cd, struct dma_mapping *m, void *uaddr,
/* determine space needed for page_list. */
data = (unsigned long)uaddr;
offs = offset_in_page(data);
if (size > ULONG_MAX - PAGE_SIZE - offs) {
m->size = 0; /* mark unused and not added */
return -EINVAL;
}
m->nr_pages = DIV_ROUND_UP(offs + size, PAGE_SIZE);
m->page_list = kcalloc(m->nr_pages,

6
drivers/misc/habanalabs/context.c
View File

@ -26,6 +26,12 @@ static void hl_ctx_fini(struct hl_ctx *ctx)
dma_fence_put(ctx->cs_pending[i]);
if (ctx->asid != HL_KERNEL_ASID_ID) {
/*
* The engines are stopped as there is no executing CS, but the
* Coresight might be still working by accessing addresses
* related to the stopped engines. Hence stop it explicitly.
*/
hdev->asic_funcs->halt_coresight(hdev);
hl_vm_ctx_fini(ctx);
hl_asid_free(hdev, ctx->asid);
}

65
drivers/misc/habanalabs/debugfs.c
View File

@ -459,41 +459,31 @@ static ssize_t mmu_write(struct file *file, const char __user *buf,
struct hl_debugfs_entry *entry = s->private;
struct hl_dbg_device_entry *dev_entry = entry->dev_entry;
struct hl_device *hdev = dev_entry->hdev;
char kbuf[MMU_KBUF_SIZE], asid_kbuf[MMU_ASID_BUF_SIZE],
addr_kbuf[MMU_ADDR_BUF_SIZE];
char kbuf[MMU_KBUF_SIZE];
char *c;
ssize_t rc;
if (!hdev->mmu_enable)
return count;
memset(kbuf, 0, sizeof(kbuf));
memset(asid_kbuf, 0, sizeof(asid_kbuf));
memset(addr_kbuf, 0, sizeof(addr_kbuf));
if (count > sizeof(kbuf) - 1)
goto err;
if (copy_from_user(kbuf, buf, count))
goto err;
kbuf[MMU_KBUF_SIZE - 1] = 0;
kbuf[count] = 0;
c = strchr(kbuf, ' ');
if (!c)
goto err;
*c = '\0';
memcpy(asid_kbuf, kbuf, c - kbuf);
rc = kstrtouint(asid_kbuf, 10, &dev_entry->mmu_asid);
rc = kstrtouint(kbuf, 10, &dev_entry->mmu_asid);
if (rc)
goto err;
c = strstr(kbuf, " 0x");
if (!c)
if (strncmp(c+1, "0x", 2))
goto err;
c += 3;
memcpy(addr_kbuf, c, (kbuf + count) - c);
rc = kstrtoull(addr_kbuf, 16, &dev_entry->mmu_addr);
rc = kstrtoull(c+3, 16, &dev_entry->mmu_addr);
if (rc)
goto err;
@ -510,6 +500,7 @@ static int device_va_to_pa(struct hl_device *hdev, u64 virt_addr,
{
struct hl_ctx *ctx = hdev->user_ctx;
u64 hop_addr, hop_pte_addr, hop_pte;
u64 offset_mask = HOP4_MASK | OFFSET_MASK;
int rc = 0;
if (!ctx) {
@ -552,12 +543,14 @@ static int device_va_to_pa(struct hl_device *hdev, u64 virt_addr,
goto not_mapped;
hop_pte_addr = get_hop4_pte_addr(ctx, hop_addr, virt_addr);
hop_pte = hdev->asic_funcs->read_pte(hdev, hop_pte_addr);
offset_mask = OFFSET_MASK;
}
if (!(hop_pte & PAGE_PRESENT_MASK))
goto not_mapped;
*phys_addr = (hop_pte & PTE_PHYS_ADDR_MASK) | (virt_addr & OFFSET_MASK);
*phys_addr = (hop_pte & ~offset_mask) | (virt_addr & offset_mask);
goto out;
@ -600,10 +593,8 @@ static ssize_t hl_data_read32(struct file *f, char __user *buf,
}
sprintf(tmp_buf, "0x%08x\n", val);
rc = simple_read_from_buffer(buf, strlen(tmp_buf) + 1, ppos, tmp_buf,
strlen(tmp_buf) + 1);
return rc;
return simple_read_from_buffer(buf, count, ppos, tmp_buf,
strlen(tmp_buf));
}
static ssize_t hl_data_write32(struct file *f, const char __user *buf,
@ -645,7 +636,6 @@ static ssize_t hl_get_power_state(struct file *f, char __user *buf,
struct hl_dbg_device_entry *entry = file_inode(f)->i_private;
struct hl_device *hdev = entry->hdev;
char tmp_buf[200];
ssize_t rc;
int i;
if (*ppos)
@ -660,10 +650,8 @@ static ssize_t hl_get_power_state(struct file *f, char __user *buf,
sprintf(tmp_buf,
"current power state: %d\n1 - D0\n2 - D3hot\n3 - Unknown\n", i);
rc = simple_read_from_buffer(buf, strlen(tmp_buf) + 1, ppos, tmp_buf,
strlen(tmp_buf) + 1);
return rc;
return simple_read_from_buffer(buf, count, ppos, tmp_buf,
strlen(tmp_buf));
}
static ssize_t hl_set_power_state(struct file *f, const char __user *buf,
@ -716,8 +704,8 @@ static ssize_t hl_i2c_data_read(struct file *f, char __user *buf,
}
sprintf(tmp_buf, "0x%02x\n", val);
rc = simple_read_from_buffer(buf, strlen(tmp_buf) + 1, ppos, tmp_buf,
strlen(tmp_buf) + 1);
rc = simple_read_from_buffer(buf, count, ppos, tmp_buf,
strlen(tmp_buf));
return rc;
}
@ -806,18 +794,9 @@ static ssize_t hl_led2_write(struct file *f, const char __user *buf,
static ssize_t hl_device_read(struct file *f, char __user *buf,
size_t count, loff_t *ppos)
{
char tmp_buf[200];
ssize_t rc;
if (*ppos)
return 0;
sprintf(tmp_buf,
"Valid values: disable, enable, suspend, resume, cpu_timeout\n");
rc = simple_read_from_buffer(buf, strlen(tmp_buf) + 1, ppos, tmp_buf,
strlen(tmp_buf) + 1);
return rc;
static const char *help =
"Valid values: disable, enable, suspend, resume, cpu_timeout\n";
return simple_read_from_buffer(buf, count, ppos, help, strlen(help));
}
static ssize_t hl_device_write(struct file *f, const char __user *buf,
@ -825,7 +804,7 @@ static ssize_t hl_device_write(struct file *f, const char __user *buf,
{
struct hl_dbg_device_entry *entry = file_inode(f)->i_private;
struct hl_device *hdev = entry->hdev;
char data[30];
char data[30] = {0};
/* don't allow partial writes */
if (*ppos != 0)

2
drivers/misc/habanalabs/device.c
View File

@ -231,6 +231,7 @@ static int device_early_init(struct hl_device *hdev)
mutex_init(&hdev->fd_open_cnt_lock);
mutex_init(&hdev->send_cpu_message_lock);
mutex_init(&hdev->mmu_cache_lock);
INIT_LIST_HEAD(&hdev->hw_queues_mirror_list);
spin_lock_init(&hdev->hw_queues_mirror_lock);
atomic_set(&hdev->in_reset, 0);
@ -260,6 +261,7 @@ early_fini:
*/
static void device_early_fini(struct hl_device *hdev)
{
mutex_destroy(&hdev->mmu_cache_lock);
mutex_destroy(&hdev->send_cpu_message_lock);
hl_cb_mgr_fini(hdev, &hdev->kernel_cb_mgr);

3
drivers/misc/habanalabs/goya/goya.c
View File

@ -4819,7 +4819,8 @@ static const struct hl_asic_funcs goya_funcs = {
.set_dram_bar_base = goya_set_ddr_bar_base,
.init_iatu = goya_init_iatu,
.rreg = hl_rreg,
.wreg = hl_wreg
.wreg = hl_wreg,
.halt_coresight = goya_halt_coresight
};
/*

1
drivers/misc/habanalabs/goya/goyaP.h
View File

@ -202,6 +202,7 @@ void goya_add_device_attr(struct hl_device *hdev,
struct attribute_group *dev_attr_grp);
int goya_armcp_info_get(struct hl_device *hdev);
int goya_debug_coresight(struct hl_device *hdev, void *data);
void goya_halt_coresight(struct hl_device *hdev);
void goya_mmu_prepare(struct hl_device *hdev, u32 asid);
int goya_mmu_clear_pgt_range(struct hl_device *hdev);

31
drivers/misc/habanalabs/goya/goya_coresight.c
View File

@ -425,8 +425,18 @@ static int goya_config_etr(struct hl_device *hdev,
WREG32(base_reg + 0x28, 0);
WREG32(base_reg + 0x304, 0);
if (params->output_size >= sizeof(u32))
*(u32 *) params->output = RREG32(base_reg + 0x18);
if (params->output_size >= sizeof(u64)) {
u32 rwp, rwphi;
/*
* The trace buffer address is 40 bits wide. The end of
* the buffer is set in the RWP register (lower 32
* bits), and in the RWPHI register (upper 8 bits).
*/
rwp = RREG32(base_reg + 0x18);
rwphi = RREG32(base_reg + 0x3c) & 0xff;
*(u64 *) params->output = ((u64) rwphi << 32) | rwp;
}
}
return 0;
@ -626,3 +636,20 @@ int goya_debug_coresight(struct hl_device *hdev, void *data)
return rc;
}
void goya_halt_coresight(struct hl_device *hdev)
{
struct hl_debug_params params = {};
int i, rc;
for (i = GOYA_ETF_FIRST ; i <= GOYA_ETF_LAST ; i++) {
params.reg_idx = i;
rc = goya_config_etf(hdev, &params);
if (rc)
dev_err(hdev->dev, "halt ETF failed, %d/%d\n", rc, i);
}
rc = goya_config_etr(hdev, &params);
if (rc)
dev_err(hdev->dev, "halt ETR failed, %d\n", rc);
}

2
drivers/misc/habanalabs/habanalabs.h
View File

@ -501,6 +501,7 @@ enum hl_pll_frequency {
* @init_iatu: Initialize the iATU unit inside the PCI controller.
* @rreg: Read a register. Needed for simulator support.
* @wreg: Write a register. Needed for simulator support.
* @halt_coresight: stop the ETF and ETR traces.
*/
struct hl_asic_funcs {
int (*early_init)(struct hl_device *hdev);
@ -578,6 +579,7 @@ struct hl_asic_funcs {
int (*init_iatu)(struct hl_device *hdev);
u32 (*rreg)(struct hl_device *hdev, u32 reg);
void (*wreg)(struct hl_device *hdev, u32 reg, u32 val);
void (*halt_coresight)(struct hl_device *hdev);
};

6
drivers/misc/habanalabs/memory.c
View File

@ -675,11 +675,6 @@ static int init_phys_pg_pack_from_userptr(struct hl_ctx *ctx,
total_npages += npages;
if (first) {
first = false;
dma_addr &= PAGE_MASK_2MB;
}
if ((npages % PGS_IN_2MB_PAGE) ||
(dma_addr & (PAGE_SIZE_2MB - 1)))
is_huge_page_opt = false;
@ -704,7 +699,6 @@ static int init_phys_pg_pack_from_userptr(struct hl_ctx *ctx,
phys_pg_pack->total_size = total_npages * page_size;
j = 0;
first = true;
for_each_sg(userptr->sgt->sgl, sg, userptr->sgt->nents, i) {
npages = get_sg_info(sg, &dma_addr);

8
drivers/misc/habanalabs/mmu.c
View File

@ -404,15 +404,12 @@ int hl_mmu_init(struct hl_device *hdev)
/* MMU H/W init was already done in device hw_init() */
mutex_init(&hdev->mmu_cache_lock);
hdev->mmu_pgt_pool =
gen_pool_create(__ffs(prop->mmu_hop_table_size), -1);
if (!hdev->mmu_pgt_pool) {
dev_err(hdev->dev, "Failed to create page gen pool\n");
rc = -ENOMEM;
goto err_pool_create;
return -ENOMEM;
}
rc = gen_pool_add(hdev->mmu_pgt_pool, prop->mmu_pgt_addr +
@ -436,8 +433,6 @@ int hl_mmu_init(struct hl_device *hdev)
err_pool_add:
gen_pool_destroy(hdev->mmu_pgt_pool);
err_pool_create:
mutex_destroy(&hdev->mmu_cache_lock);
return rc;
}
@ -459,7 +454,6 @@ void hl_mmu_fini(struct hl_device *hdev)
kvfree(hdev->mmu_shadow_hop0);
gen_pool_destroy(hdev->mmu_pgt_pool);
mutex_destroy(&hdev->mmu_cache_lock);
/* MMU H/W fini will be done in device hw_fini() */
}

23
drivers/misc/lkdtm/bugs.c
View File

@ -32,12 +32,20 @@ static int recur_count = REC_NUM_DEFAULT;
static DEFINE_SPINLOCK(lock_me_up);
static int recursive_loop(int remaining)
/*
* Make sure compiler does not optimize this function or stack frame away:
* - function marked noinline
* - stack variables are marked volatile
* - stack variables are written (memset()) and read (pr_info())
* - function has external effects (pr_info())
* */
static int noinline recursive_loop(int remaining)
{
char buf[REC_STACK_SIZE];
volatile char buf[REC_STACK_SIZE];
/* Make sure compiler does not optimize this away. */
memset(buf, (remaining & 0xff) | 0x1, REC_STACK_SIZE);
memset((void *)buf, remaining & 0xFF, sizeof(buf));
pr_info("loop %d/%d ...\n", (int)buf[remaining % sizeof(buf)],
recur_count);
if (!remaining)
return 0;
else
@ -81,9 +89,12 @@ void lkdtm_LOOP(void)
;
}
void lkdtm_OVERFLOW(void)
void lkdtm_EXHAUST_STACK(void)
{
(void) recursive_loop(recur_count);
pr_info("Calling function with %d frame size to depth %d ...\n",
REC_STACK_SIZE, recur_count);
recursive_loop(recur_count);
pr_info("FAIL: survived without exhausting stack?!\n");
}
static noinline void __lkdtm_CORRUPT_STACK(void *stack)

6
drivers/misc/lkdtm/core.c
View File

@ -106,12 +106,12 @@ static const struct crashtype crashtypes[] = {
CRASHTYPE(WARNING),
CRASHTYPE(EXCEPTION),
CRASHTYPE(LOOP),
CRASHTYPE(OVERFLOW),
CRASHTYPE(EXHAUST_STACK),
CRASHTYPE(CORRUPT_STACK),
CRASHTYPE(CORRUPT_STACK_STRONG),
CRASHTYPE(CORRUPT_LIST_ADD),
CRASHTYPE(CORRUPT_LIST_DEL),
CRASHTYPE(CORRUPT_USER_DS),
CRASHTYPE(CORRUPT_STACK),
CRASHTYPE(CORRUPT_STACK_STRONG),
CRASHTYPE(STACK_GUARD_PAGE_LEADING),
CRASHTYPE(STACK_GUARD_PAGE_TRAILING),
CRASHTYPE(UNALIGNED_LOAD_STORE_WRITE),

2
drivers/misc/lkdtm/lkdtm.h
View File

@ -13,7 +13,7 @@ void lkdtm_BUG(void);
void lkdtm_WARNING(void);
void lkdtm_EXCEPTION(void);
void lkdtm_LOOP(void);
void lkdtm_OVERFLOW(void);
void lkdtm_EXHAUST_STACK(void);
void lkdtm_CORRUPT_STACK(void);
void lkdtm_CORRUPT_STACK_STRONG(void);
void lkdtm_UNALIGNED_LOAD_STORE_WRITE(void);

10
drivers/misc/lkdtm/usercopy.c
View File

@ -324,14 +324,16 @@ free_user:
void lkdtm_USERCOPY_KERNEL_DS(void)
{
char __user *user_ptr = (char __user *)ERR_PTR(-EINVAL);
char __user *user_ptr =
(char __user *)(0xFUL << (sizeof(unsigned long) * 8 - 4));
mm_segment_t old_fs = get_fs();
char buf[10] = {0};
pr_info("attempting copy_to_user on unmapped kernel address\n");
pr_info("attempting copy_to_user() to noncanonical address: %px\n",
user_ptr);
set_fs(KERNEL_DS);
if (copy_to_user(user_ptr, buf, sizeof(buf)))
pr_info("copy_to_user un unmapped kernel address failed\n");
if (copy_to_user(user_ptr, buf, sizeof(buf)) == 0)
pr_err("copy_to_user() to noncanonical address succeeded!?\n");
set_fs(old_fs);
}

2
drivers/parport/share.c
View File

@ -895,6 +895,7 @@ parport_register_dev_model(struct parport *port, const char *name,
par_dev->devmodel = true;
ret = device_register(&par_dev->dev);
if (ret) {
kfree(par_dev->state);
put_device(&par_dev->dev);
goto err_put_port;
}
@ -912,6 +913,7 @@ parport_register_dev_model(struct parport *port, const char *name,
spin_unlock(&port->physport->pardevice_lock);
pr_debug("%s: cannot grant exclusive access for device %s\n",
port->name, name);
kfree(par_dev->state);
device_unregister(&par_dev->dev);
goto err_put_port;
}

2
drivers/w1/slaves/w1_ds2408.c
View File

@ -138,7 +138,7 @@ static ssize_t status_control_read(struct file *filp, struct kobject *kobj,
W1_F29_REG_CONTROL_AND_STATUS, buf);
}
#ifdef fCONFIG_W1_SLAVE_DS2408_READBACK
#ifdef CONFIG_W1_SLAVE_DS2408_READBACK
static bool optional_read_back_valid(struct w1_slave *sl, u8 expected)
{
u8 w1_buf[3];

22
include/uapi/misc/habanalabs.h
View File

@ -413,6 +413,10 @@ struct hl_debug_params_spmu {
#define HL_DEBUG_OP_SPMU 5
/* Opcode for timestamp */
#define HL_DEBUG_OP_TIMESTAMP 6
/* Opcode for setting the device into or out of debug mode. The enable
* variable should be 1 for enabling debug mode and 0 for disabling it
*/
#define HL_DEBUG_OP_SET_MODE 7
struct hl_debug_args {
/*
@ -574,8 +578,22 @@ struct hl_debug_args {
*
* This IOCTL allows the user to get debug traces from the chip.
*
* The user needs to provide the register index and essential data such as
* buffer address and size.
* Before the user can send configuration requests of the various
* debug/profile engines, it needs to set the device into debug mode.
* This is because the debug/profile infrastructure is shared component in the
* device and we can't allow multiple users to access it at the same time.
*
* Once a user set the device into debug mode, the driver won't allow other
* users to "work" with the device, i.e. open a FD. If there are multiple users
* opened on the device, the driver won't allow any user to debug the device.
*
* For each configuration request, the user needs to provide the register index
* and essential data such as buffer address and size.
*
* Once the user has finished using the debug/profile engines, he should
* set the device into non-debug mode, i.e. disable debug mode.
*
* The driver can decide to "kick out" the user if he abuses this interface.
*
*/
#define HL_IOCTL_DEBUG \

15
init/Kconfig
View File

@ -580,15 +580,14 @@ config IKCONFIG_PROC
This option enables access to the kernel configuration file
through /proc/config.gz.
config IKHEADERS_PROC
tristate "Enable kernel header artifacts through /proc/kheaders.tar.xz"
depends on PROC_FS
config IKHEADERS
tristate "Enable kernel headers through /sys/kernel/kheaders.tar.xz"
depends on SYSFS
help
This option enables access to the kernel header and other artifacts that
are generated during the build process. These can be used to build eBPF
tracing programs, or similar programs. If you build the headers as a
module, a module called kheaders.ko is built which can be loaded on-demand
to get access to the headers.
This option enables access to the in-kernel headers that are generated during
the build process. These can be used to build eBPF tracing programs,
or similar programs. If you build the headers as a module, a module called
kheaders.ko is built which can be loaded on-demand to get access to headers.
config LOG_BUF_SHIFT
int "Kernel log buffer size (16 => 64KB, 17 => 128KB)"

4
kernel/Makefile
View File

@ -71,7 +71,7 @@ obj-$(CONFIG_UTS_NS) += utsname.o
obj-$(CONFIG_USER_NS) += user_namespace.o
obj-$(CONFIG_PID_NS) += pid_namespace.o
obj-$(CONFIG_IKCONFIG) += configs.o
obj-$(CONFIG_IKHEADERS_PROC) += kheaders.o
obj-$(CONFIG_IKHEADERS) += kheaders.o
obj-$(CONFIG_SMP) += stop_machine.o
obj-$(CONFIG_KPROBES_SANITY_TEST) += test_kprobes.o
obj-$(CONFIG_AUDIT) += audit.o auditfilter.o
@ -127,7 +127,7 @@ $(obj)/config_data.gz: $(KCONFIG_CONFIG) FORCE
$(obj)/kheaders.o: $(obj)/kheaders_data.tar.xz
quiet_cmd_genikh = CHK $(obj)/kheaders_data.tar.xz
cmd_genikh = $(CONFIG_SHELL) $(srctree)/kernel/gen_ikh_data.sh $@
cmd_genikh = $(CONFIG_SHELL) $(srctree)/kernel/gen_kheaders.sh $@
$(obj)/kheaders_data.tar.xz: FORCE
$(call cmd,genikh)

17
kernel/gen_ikh_data.sh → kernel/gen_kheaders.sh
View File

@ -2,7 +2,7 @@
# SPDX-License-Identifier: GPL-2.0
# This script generates an archive consisting of kernel headers
# for CONFIG_IKHEADERS_PROC.
# for CONFIG_IKHEADERS.
set -e
spath="$(dirname "$(readlink -f "$0")")"
kroot="$spath/.."
@ -31,9 +31,8 @@ arch/$SRCARCH/include/
# This block is useful for debugging the incremental builds.
# Uncomment it for debugging.
# iter=1
# if [ ! -f /tmp/iter ]; then echo 1 > /tmp/iter;
# else; iter=$(($(cat /tmp/iter) + 1)); fi
# if [ ! -f /tmp/iter ]; then iter=1; echo 1 > /tmp/iter;
# else iter=$(($(cat /tmp/iter) + 1)); echo $iter > /tmp/iter; fi
# find $src_file_list -type f | xargs ls -lR > /tmp/src-ls-$iter
# find $obj_file_list -type f | xargs ls -lR > /tmp/obj-ls-$iter
@ -43,10 +42,18 @@ arch/$SRCARCH/include/
pushd $kroot > /dev/null
src_files_md5="$(find $src_file_list -type f |
grep -v "include/generated/compile.h" |
grep -v "include/generated/autoconf.h" |
grep -v "include/config/auto.conf" |
grep -v "include/config/auto.conf.cmd" |
grep -v "include/config/tristate.conf" |
xargs ls -lR | md5sum | cut -d ' ' -f1)"
popd > /dev/null
obj_files_md5="$(find $obj_file_list -type f |
grep -v "include/generated/compile.h" |
grep -v "include/generated/autoconf.h" |
grep -v "include/config/auto.conf" |
grep -v "include/config/auto.conf.cmd" |
grep -v "include/config/tristate.conf" |
xargs ls -lR | md5sum | cut -d ' ' -f1)"
if [ -f $tarfile ]; then tarfile_md5="$(md5sum $tarfile | cut -d ' ' -f1)"; fi
@ -82,7 +89,7 @@ find $cpio_dir -type f -print0 |
tar -Jcf $tarfile -C $cpio_dir/ . > /dev/null
echo "$src_files_md5" > kernel/kheaders.md5
echo "$src_files_md5" > kernel/kheaders.md5
echo "$obj_files_md5" >> kernel/kheaders.md5
echo "$(md5sum $tarfile | cut -d ' ' -f1)" >> kernel/kheaders.md5

40
kernel/kheaders.c
View File

@ -8,9 +8,8 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/proc_fs.h>
#include <linux/kobject.h>
#include <linux/init.h>
#include <linux/uaccess.h>
/*
* Define kernel_headers_data and kernel_headers_data_end, within which the
@ -31,39 +30,32 @@ extern char kernel_headers_data;
extern char kernel_headers_data_end;
static ssize_t
ikheaders_read_current(struct file *file, char __user *buf,
size_t len, loff_t *offset)
ikheaders_read(struct file *file, struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t len)
{
return simple_read_from_buffer(buf, len, offset,
&kernel_headers_data,
&kernel_headers_data_end -
&kernel_headers_data);
memcpy(buf, &kernel_headers_data + off, len);
return len;
}
static const struct file_operations ikheaders_file_ops = {
.read = ikheaders_read_current,
.llseek = default_llseek,
static struct bin_attribute kheaders_attr __ro_after_init = {
.attr = {
.name = "kheaders.tar.xz",
.mode = 0444,
},
.read = &ikheaders_read,
};
static int __init ikheaders_init(void)
{
struct proc_dir_entry *entry;
/* create the current headers file */
entry = proc_create("kheaders.tar.xz", S_IRUGO, NULL,
&ikheaders_file_ops);
if (!entry)
return -ENOMEM;
proc_set_size(entry,
&kernel_headers_data_end -
&kernel_headers_data);
return 0;
kheaders_attr.size = (&kernel_headers_data_end -
&kernel_headers_data);
return sysfs_create_bin_file(kernel_kobj, &kheaders_attr);
}
static void __exit ikheaders_cleanup(void)
{
remove_proc_entry("kheaders.tar.xz", NULL);
sysfs_remove_bin_file(kernel_kobj, &kheaders_attr);
}
module_init(ikheaders_init);

14
lib/test_firmware.c
View File

@ -224,30 +224,30 @@ static ssize_t config_show(struct device *dev,
mutex_lock(&test_fw_mutex);
len += snprintf(buf, PAGE_SIZE,
len += scnprintf(buf, PAGE_SIZE - len,
"Custom trigger configuration for: %s\n",
dev_name(dev));
if (test_fw_config->name)
len += snprintf(buf+len, PAGE_SIZE,
len += scnprintf(buf+len, PAGE_SIZE - len,
"name:\t%s\n",
test_fw_config->name);
else
len += snprintf(buf+len, PAGE_SIZE,
len += scnprintf(buf+len, PAGE_SIZE - len,
"name:\tEMTPY\n");
len += snprintf(buf+len, PAGE_SIZE,
len += scnprintf(buf+len, PAGE_SIZE - len,
"num_requests:\t%u\n", test_fw_config->num_requests);
len += snprintf(buf+len, PAGE_SIZE,
len += scnprintf(buf+len, PAGE_SIZE - len,
"send_uevent:\t\t%s\n",
test_fw_config->send_uevent ?
"FW_ACTION_HOTPLUG" :
"FW_ACTION_NOHOTPLUG");
len += snprintf(buf+len, PAGE_SIZE,
len += scnprintf(buf+len, PAGE_SIZE - len,
"sync_direct:\t\t%s\n",
test_fw_config->sync_direct ? "true" : "false");
len += snprintf(buf+len, PAGE_SIZE,
len += scnprintf(buf+len, PAGE_SIZE - len,
"read_fw_idx:\t%u\n", test_fw_config->read_fw_idx);
mutex_unlock(&test_fw_mutex);