From 1cce16d37d0fe2668787d64ad172c5be6973aeca Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Mon, 4 Nov 2013 17:27:19 -0700 Subject: [PATCH] net: mv643xx_eth: Add missing phy_addr_set in DT mode Commit cc9d4598 'net: mv643xx_eth: use of_phy_connect if phy_node present' made the call to phy_scan optional, if the DT has a link to the phy node. However phy_scan has the side effect of calling phy_addr_set, which writes the phy MDIO address to the ethernet controller. If phy_addr_set is not called, and the bootloader has not set the correct address then the driver will fail to function. Tested on Kirkwood. Signed-off-by: Jason Gunthorpe Acked-by: Sebastian Hesselbarth Tested-by: Arnaud Ebalard Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mv643xx_eth.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 4cfae6c9a63f..00cd36e08601 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -2890,6 +2890,7 @@ static int mv643xx_eth_probe(struct platform_device *pdev) PHY_INTERFACE_MODE_GMII); if (!mp->phy) err = -ENODEV; + phy_addr_set(mp, mp->phy->addr); } else if (pd->phy_addr != MV643XX_ETH_PHY_NONE) { mp->phy = phy_scan(mp, pd->phy_addr);