drivers/net/ftgmac100: fix DHCP potential failure with systemd
DHCP failures were observed with systemd 247.6. The issue could be reproduced by rebooting Aspeed 2600 and then running ifconfig ethX down/up. It is caused by below procedures in the driver: 1. ftgmac100_open() enables net interface and call phy_start() 2. When PHY is link up, it calls netif_carrier_on() and then adjust_link callback 3. ftgmac100_adjust_link() will schedule the reset task 4. ftgmac100_reset_task() will then reset the MAC in another schedule After step 2, systemd will be notified to send DHCP discover packet, while the packet might be corrupted by MAC reset operation in step 4. Call ftgmac100_reset() directly instead of scheduling task to fix the issue. Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
3c773dba81
commit
1baf2e50e4
|
@ -1402,8 +1402,17 @@ static void ftgmac100_adjust_link(struct net_device *netdev)
|
|||
/* Disable all interrupts */
|
||||
iowrite32(0, priv->base + FTGMAC100_OFFSET_IER);
|
||||
|
||||
/* Reset the adapter asynchronously */
|
||||
schedule_work(&priv->reset_task);
|
||||
/* Release phy lock to allow ftgmac100_reset to aquire it, keeping lock
|
||||
* order consistent to prevent dead lock.
|
||||
*/
|
||||
if (netdev->phydev)
|
||||
mutex_unlock(&netdev->phydev->lock);
|
||||
|
||||
ftgmac100_reset(priv);
|
||||
|
||||
if (netdev->phydev)
|
||||
mutex_lock(&netdev->phydev->lock);
|
||||
|
||||
}
|
||||
|
||||
static int ftgmac100_mii_probe(struct net_device *netdev)
|
||||
|
|
Loading…
Reference in New Issue