diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c index da3432c9f64d..aaa038ffc8a5 100644 --- a/sound/soc/codecs/hdac_hdmi.c +++ b/sound/soc/codecs/hdac_hdmi.c @@ -1420,33 +1420,40 @@ static int hdmi_codec_remove(struct snd_soc_codec *codec) } #ifdef CONFIG_PM +static int hdmi_codec_prepare(struct device *dev) +{ + struct hdac_ext_device *edev = to_hda_ext_device(dev); + struct hdac_device *hdac = &edev->hdac; + + pm_runtime_get_sync(&edev->hdac.dev); + + /* + * Power down afg. + * codec_read is preferred over codec_write to set the power state. + * This way verb is send to set the power state and response + * is received. So setting power state is ensured without using loop + * to read the state. + */ + snd_hdac_codec_read(hdac, hdac->afg, 0, AC_VERB_SET_POWER_STATE, + AC_PWRST_D3); + + return 0; +} + static void hdmi_codec_complete(struct device *dev) { struct hdac_ext_device *edev = to_hda_ext_device(dev); struct hdac_hdmi_priv *hdmi = edev->private_data; struct hdac_hdmi_pin *pin; struct hdac_device *hdac = &edev->hdac; - struct hdac_bus *bus = hdac->bus; - int err; - unsigned long timeout; + + /* Power up afg */ + snd_hdac_codec_read(hdac, hdac->afg, 0, AC_VERB_SET_POWER_STATE, + AC_PWRST_D0); hdac_hdmi_skl_enable_all_pins(&edev->hdac); hdac_hdmi_skl_enable_dp12(&edev->hdac); - /* Power up afg */ - if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D0)) { - - snd_hdac_codec_write(hdac, hdac->afg, 0, - AC_VERB_SET_POWER_STATE, AC_PWRST_D0); - - /* Wait till power state is set to D0 */ - timeout = jiffies + msecs_to_jiffies(1000); - while (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D0) - && time_before(jiffies, timeout)) { - msleep(50); - } - } - /* * As the ELD notify callback request is not entertained while the * device is in suspend state. Need to manually check detection of @@ -1455,18 +1462,10 @@ static void hdmi_codec_complete(struct device *dev) list_for_each_entry(pin, &hdmi->pin_list, head) hdac_hdmi_present_sense(pin, 1); - /* - * Codec power is turned ON during controller resume. - * Turn it OFF here - */ - err = snd_hdac_display_power(bus, false); - if (err < 0) { - dev_err(bus->dev, - "Cannot turn OFF display power on i915, err: %d\n", - err); - } + pm_runtime_put_sync(&edev->hdac.dev); } #else +#define hdmi_codec_prepare NULL #define hdmi_codec_complete NULL #endif @@ -1557,7 +1556,6 @@ static int hdac_hdmi_runtime_suspend(struct device *dev) struct hdac_ext_device *edev = to_hda_ext_device(dev); struct hdac_device *hdac = &edev->hdac; struct hdac_bus *bus = hdac->bus; - unsigned long timeout; int err; dev_dbg(dev, "Enter: %s\n", __func__); @@ -1566,20 +1564,15 @@ static int hdac_hdmi_runtime_suspend(struct device *dev) if (!bus) return 0; - /* Power down afg */ - if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D3)) { - snd_hdac_codec_write(hdac, hdac->afg, 0, - AC_VERB_SET_POWER_STATE, AC_PWRST_D3); - - /* Wait till power state is set to D3 */ - timeout = jiffies + msecs_to_jiffies(1000); - while (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D3) - && time_before(jiffies, timeout)) { - - msleep(50); - } - } - + /* + * Power down afg. + * codec_read is preferred over codec_write to set the power state. + * This way verb is send to set the power state and response + * is received. So setting power state is ensured without using loop + * to read the state. + */ + snd_hdac_codec_read(hdac, hdac->afg, 0, AC_VERB_SET_POWER_STATE, + AC_PWRST_D3); err = snd_hdac_display_power(bus, false); if (err < 0) { dev_err(bus->dev, "Cannot turn on display power on i915\n"); @@ -1612,9 +1605,8 @@ static int hdac_hdmi_runtime_resume(struct device *dev) hdac_hdmi_skl_enable_dp12(&edev->hdac); /* Power up afg */ - if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D0)) - snd_hdac_codec_write(hdac, hdac->afg, 0, - AC_VERB_SET_POWER_STATE, AC_PWRST_D0); + snd_hdac_codec_read(hdac, hdac->afg, 0, AC_VERB_SET_POWER_STATE, + AC_PWRST_D0); return 0; } @@ -1625,6 +1617,7 @@ static int hdac_hdmi_runtime_resume(struct device *dev) static const struct dev_pm_ops hdac_hdmi_pm = { SET_RUNTIME_PM_OPS(hdac_hdmi_runtime_suspend, hdac_hdmi_runtime_resume, NULL) + .prepare = hdmi_codec_prepare, .complete = hdmi_codec_complete, };