UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

watchdog: aspeed_wdt: Reorder output signal register configuration 

If the output driving type is push-pull mode, the output
polarity should be selected in advance. Otherwise, an unexpected
value will be output at the moment of changing to push-pull mode.
Thus, output polarity, WDT18[31], must be configured before
changing driving type, WDT18[30].

Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bonnie Lo <Bonnie_Lo@wiwynn.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220819094905.1962513-1-chin-ting_kuo@aspeedtech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
This commit is contained in:
Chin-Ting Kuo 2022-08-19 17:49:05 +08:00 committed by Wim Van Sebroeck
parent 891862d5ba
commit 19f04459f0
1 changed files with 8 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
drivers/watchdog/aspeed_wdt.c
View File

@ -331,14 +331,6 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
(of_device_is_compatible(np, "aspeed,ast2600-wdt"))) {
u32 reg = readl(wdt->base + WDT_RESET_WIDTH);
reg &= config->ext_pulse_width_mask;
if (of_property_read_bool(np, "aspeed,ext-push-pull"))
reg |= WDT_PUSH_PULL_MAGIC;
else
reg |= WDT_OPEN_DRAIN_MAGIC;
writel(reg, wdt->base + WDT_RESET_WIDTH);
reg &= config->ext_pulse_width_mask;
if (of_property_read_bool(np, "aspeed,ext-active-high"))
reg |= WDT_ACTIVE_HIGH_MAGIC;
@ -346,6 +338,14 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
reg |= WDT_ACTIVE_LOW_MAGIC;
writel(reg, wdt->base + WDT_RESET_WIDTH);
reg &= config->ext_pulse_width_mask;
if (of_property_read_bool(np, "aspeed,ext-push-pull"))
reg |= WDT_PUSH_PULL_MAGIC;
else
reg |= WDT_OPEN_DRAIN_MAGIC;
writel(reg, wdt->base + WDT_RESET_WIDTH);
}
if (!of_property_read_u32(np, "aspeed,ext-pulse-duration", &duration)) {