From f5f6bd58186afa4ec1ebcd074bc30255826e8480 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Thu, 9 Feb 2023 15:38:35 +0200
Subject: [PATCH 01/17] arm64: dts: qcom: sm8350: reorder device nodes

Somehow sm8350 got its device nodes not fully sorted. Start reordering
DT nodes by their address. Move apps SMMU, GIC, timer, apps RSC, cpufreq
ADSP and cDSP nodes to the end to the proper position at the end of
/soc/.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209133839.762631-3-dmitry.baryshkov@linaro.org
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 750 +++++++++++++--------------
 1 file changed, 375 insertions(+), 375 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 0a422637b61f..b85bd8fd28c0 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1421,111 +1421,6 @@
 			};
 		};
 
-		apps_smmu: iommu@15000000 {
-			compatible = "qcom,sm8350-smmu-500", "arm,mmu-500";
-			reg = <0 0x15000000 0 0x100000>;
-			#iommu-cells = <2>;
-			#global-interrupts = <2>;
-			interrupts =    <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
 		config_noc: interconnect@1500000 {
 			compatible = "qcom,sm8350-config-noc";
 			reg = <0 0x01500000 0 0xa580>;
@@ -2124,167 +2019,6 @@
 			clock-names = "core";
 		};
 
-		intc: interrupt-controller@17a00000 {
-			compatible = "arm,gic-v3";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			#redistributor-regions = <1>;
-			redistributor-stride = <0 0x20000>;
-			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
-			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
-			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		timer@17c20000 {
-			compatible = "arm,armv7-timer-mem";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0 0x20000000>;
-			reg = <0x0 0x17c20000 0x0 0x1000>;
-			clock-frequency = <19200000>;
-
-			frame@17c21000 {
-				frame-number = <0>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17c21000 0x1000>,
-				      <0x17c22000 0x1000>;
-			};
-
-			frame@17c23000 {
-				frame-number = <1>;
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17c23000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17c25000 {
-				frame-number = <2>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17c25000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17c27000 {
-				frame-number = <3>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17c27000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17c29000 {
-				frame-number = <4>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17c29000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17c2b000 {
-				frame-number = <5>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17c2b000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17c2d000 {
-				frame-number = <6>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17c2d000 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		apps_rsc: rsc@18200000 {
-			label = "apps_rsc";
-			compatible = "qcom,rpmh-rsc";
-			reg = <0x0 0x18200000 0x0 0x10000>,
-				<0x0 0x18210000 0x0 0x10000>,
-				<0x0 0x18220000 0x0 0x10000>;
-			reg-names = "drv-0", "drv-1", "drv-2";
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,tcs-offset = <0xd00>;
-			qcom,drv-id = <2>;
-			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
-					  <WAKE_TCS    3>, <CONTROL_TCS 0>;
-			power-domains = <&CLUSTER_PD>;
-
-			rpmhcc: clock-controller {
-				compatible = "qcom,sm8350-rpmh-clk";
-				#clock-cells = <1>;
-				clock-names = "xo";
-				clocks = <&xo_board>;
-			};
-
-			rpmhpd: power-controller {
-				compatible = "qcom,sm8350-rpmhpd";
-				#power-domain-cells = <1>;
-				operating-points-v2 = <&rpmhpd_opp_table>;
-
-				rpmhpd_opp_table: opp-table {
-					compatible = "operating-points-v2";
-
-					rpmhpd_opp_ret: opp1 {
-						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
-					};
-
-					rpmhpd_opp_min_svs: opp2 {
-						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
-					};
-
-					rpmhpd_opp_low_svs: opp3 {
-						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
-					};
-
-					rpmhpd_opp_svs: opp4 {
-						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-					};
-
-					rpmhpd_opp_svs_l1: opp5 {
-						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
-					};
-
-					rpmhpd_opp_nom: opp6 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
-					};
-
-					rpmhpd_opp_nom_l1: opp7 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
-					};
-
-					rpmhpd_opp_nom_l2: opp8 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
-					};
-
-					rpmhpd_opp_turbo: opp9 {
-						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
-					};
-
-					rpmhpd_opp_turbo_l1: opp10 {
-						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
-					};
-				};
-			};
-
-			apps_bcm_voter: bcm-voter {
-				compatible = "qcom,bcm-voter";
-			};
-		};
-
-		cpufreq_hw: cpufreq@18591000 {
-			compatible = "qcom,sm8350-cpufreq-epss", "qcom,cpufreq-epss";
-			reg = <0 0x18591000 0 0x1000>,
-			      <0 0x18592000 0 0x1000>,
-			      <0 0x18593000 0 0x1000>;
-			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
-			clock-names = "xo", "alternate";
-
-			#freq-domain-cells = <1>;
-		};
-
 		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
@@ -2425,115 +2159,6 @@
 			};
 		};
 
-		cdsp: remoteproc@98900000 {
-			compatible = "qcom,sm8350-cdsp-pas";
-			reg = <0 0x98900000 0 0x1400000>;
-
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
-					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd SM8350_CX>,
-					<&rpmhpd SM8350_MXC>;
-			power-domain-names = "cx", "mxc";
-
-			interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
-
-			memory-region = <&pil_cdsp_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_cdsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_CDSP
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				label = "cdsp";
-				qcom,remote-pid = <5>;
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "cdsp";
-					qcom,non-secure-domain;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@1 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <1>;
-						iommus = <&apps_smmu 0x2161 0x0400>,
-							 <&apps_smmu 0x1181 0x0420>;
-					};
-
-					compute-cb@2 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <2>;
-						iommus = <&apps_smmu 0x2162 0x0400>,
-							 <&apps_smmu 0x1182 0x0420>;
-					};
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x2163 0x0400>,
-							 <&apps_smmu 0x1183 0x0420>;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-						iommus = <&apps_smmu 0x2164 0x0400>,
-							 <&apps_smmu 0x1184 0x0420>;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-						iommus = <&apps_smmu 0x2165 0x0400>,
-							 <&apps_smmu 0x1185 0x0420>;
-					};
-
-					compute-cb@6 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <6>;
-						iommus = <&apps_smmu 0x2166 0x0400>,
-							 <&apps_smmu 0x1186 0x0420>;
-					};
-
-					compute-cb@7 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <7>;
-						iommus = <&apps_smmu 0x2167 0x0400>,
-							 <&apps_smmu 0x1187 0x0420>;
-					};
-
-					compute-cb@8 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <8>;
-						iommus = <&apps_smmu 0x2168 0x0400>,
-							 <&apps_smmu 0x1188 0x0420>;
-					};
-
-					/* note: secure cb9 in downstream */
-				};
-			};
-		};
-
 		sdhc_2: mmc@8804000 {
 			compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x08804000 0 0x1000>;
@@ -3106,6 +2731,111 @@
 			power-domains = <&rpmhpd SM8350_MMCX>;
 		};
 
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8350-smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts =    <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		adsp: remoteproc@17300000 {
 			compatible = "qcom,sm8350-adsp-pas";
 			reg = <0 0x17300000 0 0x100>;
@@ -3172,6 +2902,276 @@
 				};
 			};
 		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x20000>;
+			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer@17c20000 {
+			compatible = "arm,armv7-timer-mem";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x20000000>;
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17c21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+			};
+
+			frame@17c23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c23000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c25000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c27000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c29000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2b000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2d000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+				<0x0 0x18210000 0x0 0x10000>,
+				<0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>, <CONTROL_TCS 0>;
+			power-domains = <&CLUSTER_PD>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8350-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8350-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+		};
+
+		cpufreq_hw: cpufreq@18591000 {
+			compatible = "qcom,sm8350-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x18591000 0 0x1000>,
+			      <0 0x18592000 0 0x1000>,
+			      <0 0x18593000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+		};
+
+		cdsp: remoteproc@98900000 {
+			compatible = "qcom,sm8350-cdsp-pas";
+			reg = <0 0x98900000 0 0x1400000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM8350_CX>,
+					<&rpmhpd SM8350_MXC>;
+			power-domain-names = "cx", "mxc";
+
+			interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&pil_cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x2161 0x0400>,
+							 <&apps_smmu 0x1181 0x0420>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x2162 0x0400>,
+							 <&apps_smmu 0x1182 0x0420>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x2163 0x0400>,
+							 <&apps_smmu 0x1183 0x0420>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x2164 0x0400>,
+							 <&apps_smmu 0x1184 0x0420>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x2165 0x0400>,
+							 <&apps_smmu 0x1185 0x0420>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x2166 0x0400>,
+							 <&apps_smmu 0x1186 0x0420>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x2167 0x0400>,
+							 <&apps_smmu 0x1187 0x0420>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x2168 0x0400>,
+							 <&apps_smmu 0x1188 0x0420>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
 	};
 
 	thermal_zones: thermal-zones {

From 1417372f4f846fbc28b4306370eb011d1f0853ca Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Thu, 9 Feb 2023 15:38:36 +0200
Subject: [PATCH 02/17] arm64: dts: qcom: sm8350: move more nodes to correct
 place

Continue ordering DT nodes by their address. Move RNG, UFS, system NoC
and SLPI nodes to the proper position.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209133839.762631-4-dmitry.baryshkov@linaro.org
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 314 +++++++++++++--------------
 1 file changed, 157 insertions(+), 157 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index b85bd8fd28c0..8bf38d350521 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1421,6 +1421,13 @@
 			};
 		};
 
+		rng: rng@10d3000 {
+			compatible = "qcom,prng-ee";
+			reg = <0 0x010d3000 0 0x1000>;
+			clocks = <&rpmhcc RPMH_HWKM_CLK>;
+			clock-names = "core";
+		};
+
 		config_noc: interconnect@1500000 {
 			compatible = "qcom,sm8350-config-noc";
 			reg = <0 0x01500000 0 0xa580>;
@@ -1641,18 +1648,76 @@
 			status = "disabled";
 		};
 
-		lpass_ag_noc: interconnect@3c40000 {
-			compatible = "qcom,sm8350-lpass-ag-noc";
-			reg = <0 0x03c40000 0 0xf080>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			iommus = <&apps_smmu 0xe0 0x0>;
+
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk";
+			clocks =
+				<&gcc GCC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_UFS_PHY_AHB_CLK>,
+				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				<&rpmhcc RPMH_CXO_CLK>,
+				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			freq-table-hz =
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+			status = "disabled";
 		};
 
-		compute_noc: interconnect@a0c0000 {
-			compatible = "qcom,sm8350-compute-noc";
-			reg = <0 0x0a0c0000 0 0xa180>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sm8350-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x1c4>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "ref",
+				      "ref_aux";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@1d87400 {
+				reg = <0 0x01d87400 0 0x188>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x188>,
+				      <0 0x01d87a00 0 0x200>;
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+			};
 		};
 
 		ipa: ipa@1e40000 {
@@ -1700,6 +1765,13 @@
 			#hwlock-cells = <1>;
 		};
 
+		lpass_ag_noc: interconnect@3c40000 {
+			compatible = "qcom,sm8350-lpass-ag-noc";
+			reg = <0 0x03c40000 0 0xf080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8350-mpss-pas";
 			reg = <0x0 0x04080000 0x0 0x4040>;
@@ -1742,6 +1814,74 @@
 			};
 		};
 
+		slpi: remoteproc@5c00000 {
+			compatible = "qcom,sm8350-slpi-pas";
+			reg = <0 0x05c00000 0 0x4000>;
+
+			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM8350_LCX>,
+					<&rpmhpd SM8350_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&pil_slpi_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_slpi_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_SLPI
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "slpi";
+				qcom,remote-pid = <3>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "sdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x0541 0x0>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x0542 0x0>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x0543 0x0>;
+						/* note: shared-cb = <4> in downstream */
+					};
+				};
+			};
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sm8350-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
@@ -2012,153 +2152,6 @@
 			};
 		};
 
-		rng: rng@10d3000 {
-			compatible = "qcom,prng-ee";
-			reg = <0 0x010d3000 0 0x1000>;
-			clocks = <&rpmhcc RPMH_HWKM_CLK>;
-			clock-names = "core";
-		};
-
-		ufs_mem_hc: ufshc@1d84000 {
-			compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
-				     "jedec,ufs-2.0";
-			reg = <0 0x01d84000 0 0x3000>;
-			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
-			phy-names = "ufsphy";
-			lanes-per-direction = <2>;
-			#reset-cells = <1>;
-			resets = <&gcc GCC_UFS_PHY_BCR>;
-			reset-names = "rst";
-
-			power-domains = <&gcc UFS_PHY_GDSC>;
-
-			iommus = <&apps_smmu 0xe0 0x0>;
-
-			clock-names =
-				"core_clk",
-				"bus_aggr_clk",
-				"iface_clk",
-				"core_clk_unipro",
-				"ref_clk",
-				"tx_lane0_sync_clk",
-				"rx_lane0_sync_clk",
-				"rx_lane1_sync_clk";
-			clocks =
-				<&gcc GCC_UFS_PHY_AXI_CLK>,
-				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
-				<&gcc GCC_UFS_PHY_AHB_CLK>,
-				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
-				<&rpmhcc RPMH_CXO_CLK>,
-				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
-				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
-				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
-			freq-table-hz =
-				<75000000 300000000>,
-				<0 0>,
-				<0 0>,
-				<75000000 300000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>;
-			status = "disabled";
-		};
-
-		ufs_mem_phy: phy@1d87000 {
-			compatible = "qcom,sm8350-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			clock-names = "ref",
-				      "ref_aux";
-			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-
-			resets = <&ufs_mem_hc 0>;
-			reset-names = "ufsphy";
-			status = "disabled";
-
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x188>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x188>,
-				      <0 0x01d87a00 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
-		};
-
-		slpi: remoteproc@5c00000 {
-			compatible = "qcom,sm8350-slpi-pas";
-			reg = <0 0x05c00000 0 0x4000>;
-
-			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
-					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd SM8350_LCX>,
-					<&rpmhpd SM8350_LMX>;
-			power-domain-names = "lcx", "lmx";
-
-			memory-region = <&pil_slpi_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_slpi_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_SLPI
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				label = "slpi";
-				qcom,remote-pid = <3>;
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "sdsp";
-					qcom,non-secure-domain;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@1 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <1>;
-						iommus = <&apps_smmu 0x0541 0x0>;
-					};
-
-					compute-cb@2 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <2>;
-						iommus = <&apps_smmu 0x0542 0x0>;
-					};
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x0543 0x0>;
-						/* note: shared-cb = <4> in downstream */
-					};
-				};
-			};
-		};
-
 		sdhc_2: mmc@8804000 {
 			compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x08804000 0 0x1000>;
@@ -2307,6 +2300,13 @@
 			reg-names = "llcc_base", "llcc_broadcast_base";
 		};
 
+		compute_noc: interconnect@a0c0000 {
+			compatible = "qcom,sm8350-compute-noc";
+			reg = <0 0x0a0c0000 0 0xa180>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		usb_1: usb@a6f8800 {
 			compatible = "qcom,sm8350-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;

From 51f83fbbf1c8d7a09885099f9a8f25b3c9139797 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Thu, 9 Feb 2023 15:38:37 +0200
Subject: [PATCH 03/17] arm64: dts: qcom: sm8350: finish reordering nodes

Finish reordering DT nodes by their address. Move PDC, tsens, AOSS,
SRAM, SPMI and TLMM nodes to the proper position.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209133839.762631-5-dmitry.baryshkov@linaro.org
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 540 +++++++++++++--------------
 1 file changed, 270 insertions(+), 270 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 8bf38d350521..742e9dd17084 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1882,276 +1882,6 @@
 			};
 		};
 
-		pdc: interrupt-controller@b220000 {
-			compatible = "qcom,sm8350-pdc", "qcom,pdc";
-			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
-			qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>,   <55 306 4>,
-					  <59 312 3>, <62 374 2>,  <64 434 2>,   <66 438 3>,
-					  <69 86 1>,  <70 520 54>, <124 609 31>, <155 63 1>,
-					  <156 716 12>;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&intc>;
-			interrupt-controller;
-		};
-
-		tsens0: thermal-sensor@c263000 {
-			compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
-			reg = <0 0x0c263000 0 0x1ff>, /* TM */
-			      <0 0x0c222000 0 0x8>; /* SROT */
-			#qcom,sensors = <15>;
-			interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
-				     <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow", "critical";
-			#thermal-sensor-cells = <1>;
-		};
-
-		tsens1: thermal-sensor@c265000 {
-			compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
-			reg = <0 0x0c265000 0 0x1ff>, /* TM */
-			      <0 0x0c223000 0 0x8>; /* SROT */
-			#qcom,sensors = <14>;
-			interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
-				     <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow", "critical";
-			#thermal-sensor-cells = <1>;
-		};
-
-		aoss_qmp: power-management@c300000 {
-			compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp";
-			reg = <0 0x0c300000 0 0x400>;
-			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
-						     IRQ_TYPE_EDGE_RISING>;
-			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-			#clock-cells = <0>;
-		};
-
-		sram@c3f0000 {
-			compatible = "qcom,rpmh-stats";
-			reg = <0 0x0c3f0000 0 0x400>;
-		};
-
-		spmi_bus: spmi@c440000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg = <0x0 0x0c440000 0x0 0x1100>,
-			      <0x0 0x0c600000 0x0 0x2000000>,
-			      <0x0 0x0e600000 0x0 0x100000>,
-			      <0x0 0x0e700000 0x0 0xa0000>,
-			      <0x0 0x0c40a000 0x0 0x26000>;
-			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
-			interrupt-names = "periph_irq";
-			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			interrupt-controller;
-			#interrupt-cells = <4>;
-		};
-
-		tlmm: pinctrl@f100000 {
-			compatible = "qcom,sm8350-tlmm";
-			reg = <0 0x0f100000 0 0x300000>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-ranges = <&tlmm 0 0 204>;
-			wakeup-parent = <&pdc>;
-
-			sdc2_default_state: sdc2-default-state {
-				clk-pins {
-					pins = "sdc2_clk";
-					drive-strength = <16>;
-					bias-disable;
-				};
-
-				cmd-pins {
-					pins = "sdc2_cmd";
-					drive-strength = <16>;
-					bias-pull-up;
-				};
-
-				data-pins {
-					pins = "sdc2_data";
-					drive-strength = <16>;
-					bias-pull-up;
-				};
-			};
-
-			sdc2_sleep_state: sdc2-sleep-state {
-				clk-pins {
-					pins = "sdc2_clk";
-					drive-strength = <2>;
-					bias-disable;
-				};
-
-				cmd-pins {
-					pins = "sdc2_cmd";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-
-				data-pins {
-					pins = "sdc2_data";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			qup_uart3_default_state: qup-uart3-default-state {
-				rx-pins {
-					pins = "gpio18";
-					function = "qup3";
-				};
-				tx-pins {
-					pins = "gpio19";
-					function = "qup3";
-				};
-			};
-
-			qup_uart6_default: qup-uart6-default-state {
-				pins = "gpio30", "gpio31";
-				function = "qup6";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			qup_uart18_default: qup-uart18-default-state {
-				pins = "gpio58", "gpio59";
-				function = "qup18";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			qup_i2c0_default: qup-i2c0-default-state {
-				pins = "gpio4", "gpio5";
-				function = "qup0";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			qup_i2c1_default: qup-i2c1-default-state {
-				pins = "gpio8", "gpio9";
-				function = "qup1";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			qup_i2c2_default: qup-i2c2-default-state {
-				pins = "gpio12", "gpio13";
-				function = "qup2";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			qup_i2c4_default: qup-i2c4-default-state {
-				pins = "gpio20", "gpio21";
-				function = "qup4";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			qup_i2c5_default: qup-i2c5-default-state {
-				pins = "gpio24", "gpio25";
-				function = "qup5";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			qup_i2c6_default: qup-i2c6-default-state {
-				pins = "gpio28", "gpio29";
-				function = "qup6";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			qup_i2c7_default: qup-i2c7-default-state {
-				pins = "gpio32", "gpio33";
-				function = "qup7";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			qup_i2c8_default: qup-i2c8-default-state {
-				pins = "gpio36", "gpio37";
-				function = "qup8";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			qup_i2c9_default: qup-i2c9-default-state {
-				pins = "gpio40", "gpio41";
-				function = "qup9";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			qup_i2c10_default: qup-i2c10-default-state {
-				pins = "gpio44", "gpio45";
-				function = "qup10";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			qup_i2c11_default: qup-i2c11-default-state {
-				pins = "gpio48", "gpio49";
-				function = "qup11";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			qup_i2c12_default: qup-i2c12-default-state {
-				pins = "gpio52", "gpio53";
-				function = "qup12";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			qup_i2c13_default: qup-i2c13-default-state {
-				pins = "gpio0", "gpio1";
-				function = "qup13";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			qup_i2c14_default: qup-i2c14-default-state {
-				pins = "gpio56", "gpio57";
-				function = "qup14";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			qup_i2c15_default: qup-i2c15-default-state {
-				pins = "gpio60", "gpio61";
-				function = "qup15";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			qup_i2c16_default: qup-i2c16-default-state {
-				pins = "gpio64", "gpio65";
-				function = "qup16";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			qup_i2c17_default: qup-i2c17-default-state {
-				pins = "gpio72", "gpio73";
-				function = "qup17";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			qup_i2c19_default: qup-i2c19-default-state {
-				pins = "gpio76", "gpio77";
-				function = "qup19";
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-
 		sdhc_2: mmc@8804000 {
 			compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x08804000 0 0x1000>;
@@ -2731,6 +2461,276 @@
 			power-domains = <&rpmhpd SM8350_MMCX>;
 		};
 
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8350-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
+			qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>,   <55 306 4>,
+					  <59 312 3>, <62 374 2>,  <64 434 2>,   <66 438 3>,
+					  <69 86 1>,  <70 520 54>, <124 609 31>, <155 63 1>,
+					  <156 716 12>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+			      <0 0x0c222000 0 0x8>; /* SROT */
+			#qcom,sensors = <15>;
+			interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+			      <0 0x0c223000 0 0x8>; /* SROT */
+			#qcom,sensors = <14>;
+			interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c440000 0x0 0x1100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x100000>,
+			      <0x0 0x0e700000 0x0 0xa0000>,
+			      <0x0 0x0c40a000 0x0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8350-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 204>;
+			wakeup-parent = <&pdc>;
+
+			sdc2_default_state: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_sleep_state: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			qup_uart3_default_state: qup-uart3-default-state {
+				rx-pins {
+					pins = "gpio18";
+					function = "qup3";
+				};
+				tx-pins {
+					pins = "gpio19";
+					function = "qup3";
+				};
+			};
+
+			qup_uart6_default: qup-uart6-default-state {
+				pins = "gpio30", "gpio31";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart18_default: qup-uart18-default-state {
+				pins = "gpio58", "gpio59";
+				function = "qup18";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio8", "gpio9";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio20", "gpio21";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio24", "gpio25";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio28", "gpio29";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio32", "gpio33";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio36", "gpio37";
+				function = "qup8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio40", "gpio41";
+				function = "qup9";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio44", "gpio45";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c11_default: qup-i2c11-default-state {
+				pins = "gpio48", "gpio49";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c12_default: qup-i2c12-default-state {
+				pins = "gpio52", "gpio53";
+				function = "qup12";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c13_default: qup-i2c13-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup13";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c14_default: qup-i2c14-default-state {
+				pins = "gpio56", "gpio57";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c15_default: qup-i2c15-default-state {
+				pins = "gpio60", "gpio61";
+				function = "qup15";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c16_default: qup-i2c16-default-state {
+				pins = "gpio64", "gpio65";
+				function = "qup16";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c17_default: qup-i2c17-default-state {
+				pins = "gpio72", "gpio73";
+				function = "qup17";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c19_default: qup-i2c19-default-state {
+				pins = "gpio76", "gpio77";
+				function = "qup19";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sm8350-smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x100000>;

From 54af0ceb75958a8b7e62138646cfa6c114e71a77 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Thu, 9 Feb 2023 15:38:38 +0200
Subject: [PATCH 04/17] arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU
 nodes

Add device nodes required to enable GPU on the SM8350 platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[bjorn: Workaround for lacking RPMH_REGULATOR_LEVEL_LOW_SVS_L1 constant]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209133839.762631-6-dmitry.baryshkov@linaro.org
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 178 +++++++++++++++++++++++++++
 1 file changed, 178 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 742e9dd17084..1c97e28da6ad 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
 #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+#include <dt-bindings/clock/qcom,gpucc-sm8350.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -1765,6 +1766,183 @@
 			#hwlock-cells = <1>;
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-660.1", "qcom,adreno";
+
+			reg = <0 0x03d00000 0 0x40000>,
+			      <0 0x03d9e000 0 0x1000>,
+			      <0 0x03d61000 0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x400>, <&adreno_smmu 1 0x400>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&pil_gpu_mem>;
+			};
+
+			/* note: downstream checks gpu binning for 670 Mhz */
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-840000000 {
+					opp-hz = /bits/ 64 <840000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+				};
+
+				opp-778000000 {
+					opp-hz = /bits/ 64 <778000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+				};
+
+				opp-738000000 {
+					opp-hz = /bits/ 64 <738000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+				};
+
+				opp-676000000 {
+					opp-hz = /bits/ 64 <676000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+				};
+
+				opp-608000000 {
+					opp-hz = /bits/ 64 <608000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+				};
+
+				opp-540000000 {
+					opp-hz = /bits/ 64 <540000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-491000000 {
+					opp-hz = /bits/ 64 <491000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+				};
+
+				opp-443000000 {
+					opp-hz = /bits/ 64 <443000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-379000000 {
+					opp-hz = /bits/ 64 <379000000>;
+					opp-level = <80 /* RPMH_REGULATOR_LEVEL_LOW_SVS_L1 */>;
+				};
+
+				opp-315000000 {
+					opp-hz = /bits/ 64 <315000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-660.1", "qcom,adreno-gmu";
+
+			reg = <0 0x03d6a000 0 0x34000>,
+			      <0 0x03de0000 0 0x10000>,
+			      <0 0x0b290000 0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
+			clock-names = "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "ahb",
+				      "hub",
+				      "smmu_vote";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5 0x400>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8350-gpucc";
+			reg = <0 0x03d90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8350-smmu-500", "qcom,adreno-smmu", "arm,mmu-500";
+			reg = <0 0x03da0000 0 0x20000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HUB_AON_CLK>;
+			clock-names = "bus",
+				      "iface",
+				      "ahb",
+				      "hlos1_vote_gpu_smmu",
+				      "cx_gmu",
+				      "hub_cx_int",
+				      "hub_aon";
+
+			power-domains = <&gpucc GPU_CX_GDSC>;
+			dma-coherent;
+		};
+
 		lpass_ag_noc: interconnect@3c40000 {
 			compatible = "qcom,sm8350-lpass-ag-noc";
 			reg = <0 0x03c40000 0 0xf080>;

From a8ecd17bb681d1743309b0d2a4622b643b61d69c Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Thu, 9 Feb 2023 15:38:39 +0200
Subject: [PATCH 05/17] arm64: dts: qcom: sm8350-hdk: enable GPU

Enable the GPU on the SM8350-HDK device. The ZAP shader is required for
the GPU to function properly.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209133839.762631-7-dmitry.baryshkov@linaro.org
---
 arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 54654eb75c28..09baf6959c71 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -284,6 +284,14 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8350/a660_zap.mbn";
+	};
+};
+
 &i2c15 {
 	clock-frequency = <400000>;
 	status = "okay";

From 19d3bb90754ff11e2cd69e2c8f1124dd5b9e40fa Mon Sep 17 00:00:00 2001
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Date: Mon, 13 Feb 2023 13:56:16 -0800
Subject: [PATCH 06/17] arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks

Add the two DisplayPort controllers that are attached to QMP phys for
providing display output on USB Type-C.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213215619.1362566-2-quic_bjorande@quicinc.com
---
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 172 ++++++++++++++++++++++++-
 1 file changed, 168 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 52172f79f2f2..92d5b5e21e50 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -3155,6 +3155,20 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
+					port@0 {
+						reg = <0>;
+						mdss0_intf0_out: endpoint {
+							remote-endpoint = <&mdss0_dp0_in>;
+						};
+					};
+
+					port@4 {
+						reg = <4>;
+						mdss0_intf4_out: endpoint {
+							remote-endpoint = <&mdss0_dp1_in>;
+						};
+					};
+
 					port@5 {
 						reg = <5>;
 						mdss0_intf5_out: endpoint {
@@ -3199,6 +3213,156 @@
 				};
 			};
 
+			mdss0_dp0: displayport-controller@ae90000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0x600>,
+				      <0 0xae91000 0 0x400>,
+				      <0 0xae91400 0 0x400>;
+				interrupt-parent = <&mdss0>;
+				interrupts = <12>;
+				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_0_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&mdss0_dp0_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss0_dp0_in: endpoint {
+							remote-endpoint = <&mdss0_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss0_dp0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss0_dp1: displayport-controller@ae98000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0xae98000 0 0x200>,
+				      <0 0xae98200 0 0x200>,
+				      <0 0xae98400 0 0x600>,
+				      <0 0xae99000 0 0x400>,
+				      <0 0xae99400 0 0x400>;
+				interrupt-parent = <&mdss0>;
+				interrupts = <13>;
+				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_AUX_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&mdss0_dp1_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss0_dp1_in: endpoint {
+							remote-endpoint = <&mdss0_intf4_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss0_dp1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
 			mdss0_dp2: displayport-controller@ae9a000 {
 				compatible = "qcom,sc8280xp-dp";
 				reg = <0 0xae9a000 0 0x200>,
@@ -3387,10 +3551,10 @@
 			clocks = <&gcc GCC_DISP_AHB_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&sleep_clk>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
+				 <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <&mdss0_dp2_phy 0>,
 				 <&mdss0_dp2_phy 1>,
 				 <&mdss0_dp3_phy 0>,

From bc9a747ae91f148f97a63ade8b56b81f63bd39ad Mon Sep 17 00:00:00 2001
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Date: Mon, 13 Feb 2023 13:56:17 -0800
Subject: [PATCH 07/17] arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink

The SC8280XP CRD control over battery management and its two USB Type-C
port using pmic_glink and two GPIO-based SBU muxes.

Enable the two DisplayPort instances, GPIO SBU mux instance and
pmic_glink with the two connectors on the CRD.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213215619.1362566-3-quic_bjorande@quicinc.com
---
 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 196 +++++++++++++++++++++-
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi    |  17 ++
 2 files changed, 211 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index 2179c06b4e3b..98a0f1f9f01e 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -36,6 +36,84 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	pmic-glink {
+		compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con0_hs: endpoint {
+						remote-endpoint = <&usb_0_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con0_ss: endpoint {
+						remote-endpoint = <&mdss0_dp0_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con0_sbu: endpoint {
+						remote-endpoint = <&usb0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con1_hs: endpoint {
+						remote-endpoint = <&usb_1_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con1_ss: endpoint {
+						remote-endpoint = <&mdss0_dp1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con1_sbu: endpoint {
+						remote-endpoint = <&usb1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
 	vreg_edp_3p3: regulator-edp-3p3 {
 		compatible = "regulator-fixed";
 
@@ -139,6 +217,46 @@
 			linux,cma-default;
 		};
 	};
+
+	usb0-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+		svid = /bits/ 16 <0xff01>;
+
+		port {
+			usb0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con0_sbu>;
+			};
+		};
+	};
+
+	usb1-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+		svid = /bits/ 16 <0xff01>;
+
+		port {
+			usb1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con1_sbu>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -262,6 +380,24 @@
 	status = "okay";
 };
 
+&mdss0_dp0 {
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
+&mdss0_dp1 {
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
 &mdss0_dp3 {
 	compatible = "qcom,sc8280xp-edp";
 	/delete-property/ #sound-dai-cells;
@@ -480,7 +616,6 @@
 };
 
 &usb_0_dwc3 {
-	/* TODO: Define USB-C connector properly */
 	dr_mode = "host";
 };
 
@@ -499,12 +634,15 @@
 	status = "okay";
 };
 
+&usb_0_role_switch {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
 &usb_1 {
 	status = "okay";
 };
 
 &usb_1_dwc3 {
-	/* TODO: Define USB-C connector properly */
 	dr_mode = "host";
 };
 
@@ -523,6 +661,10 @@
 	status = "okay";
 };
 
+&usb_1_role_switch {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
 &xo_board_clk {
 	clock-frequency = <38400000>;
 };
@@ -709,4 +851,54 @@
 			drive-strength = <16>;
 		};
 	};
+
+	usb0_sbu_default: usb0-sbu-state {
+		oe-n-pins {
+			pins = "gpio101";
+			function = "gpio";
+			bias-disable;
+			drive-strengh = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio164";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		mode-pins {
+			pins = "gpio167";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+	};
+
+	usb1_sbu_default: usb1-sbu-state {
+		oe-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			bias-disable;
+			drive-strengh = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio47";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		mode-pins {
+			pins = "gpio50";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 92d5b5e21e50..0d02599d8867 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -3040,6 +3040,11 @@
 				iommus = <&apps_smmu 0x820 0x0>;
 				phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+
+				port {
+					usb_0_role_switch: endpoint {
+					};
+				};
 			};
 		};
 
@@ -3095,6 +3100,11 @@
 				iommus = <&apps_smmu 0x860 0x0>;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+
+				port {
+					usb_1_role_switch: endpoint {
+					};
+				};
 			};
 		};
 
@@ -3253,6 +3263,7 @@
 
 					port@0 {
 						reg = <0>;
+
 						mdss0_dp0_in: endpoint {
 							remote-endpoint = <&mdss0_intf0_out>;
 						};
@@ -3260,6 +3271,9 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss0_dp0_out: endpoint {
+						};
 					};
 				};
 
@@ -3335,6 +3349,9 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss0_dp1_out: endpoint {
+						};
 					};
 				};
 

From 8fcff430faee2a2e99df80c6e9b09175a0fa5002 Mon Sep 17 00:00:00 2001
From: Bjorn Andersson <quic_bjorande@quicinc.com>
Date: Mon, 13 Feb 2023 13:56:18 -0800
Subject: [PATCH 08/17] arm64: dts: qcom: sc8280xp-x13s: Enable external
 display

Like on the CRD, add the necessary nodes to enable USB Type-C
altmode-based external display on the Lenovo ThinkPad X13s.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213215619.1362566-4-quic_bjorande@quicinc.com
---
 .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 180 +++++++++++++++++-
 1 file changed, 178 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 654b6b310bc9..98e71b933437 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -77,6 +77,84 @@
 		};
 	};
 
+	pmic-glink {
+		compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con0_hs: endpoint {
+						remote-endpoint = <&usb_0_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con0_ss: endpoint {
+						remote-endpoint = <&mdss0_dp0_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con0_sbu: endpoint {
+						remote-endpoint = <&usb0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con1_hs: endpoint {
+						remote-endpoint = <&usb_1_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con1_ss: endpoint {
+						remote-endpoint = <&mdss0_dp1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con1_sbu: endpoint {
+						remote-endpoint = <&usb1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
 	vreg_edp_3p3: regulator-edp-3p3 {
 		compatible = "regulator-fixed";
 
@@ -238,6 +316,46 @@
 			};
 		};
 	};
+
+	usb0-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+		svid = /bits/ 16 <0xff01>;
+
+		port {
+			usb0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con0_sbu>;
+			};
+		};
+	};
+
+	usb1-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+		svid = /bits/ 16 <0xff01>;
+
+		port {
+			usb1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con1_sbu>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -377,6 +495,24 @@
 	status = "okay";
 };
 
+&mdss0_dp0 {
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
+&mdss0_dp1 {
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
 &mdss0_dp3 {
 	compatible = "qcom,sc8280xp-edp";
 
@@ -871,7 +1007,6 @@
 };
 
 &usb_0_dwc3 {
-	/* TODO: Define USB-C connector properly */
 	dr_mode = "host";
 };
 
@@ -890,12 +1025,15 @@
 	status = "okay";
 };
 
+&usb_0_role_switch {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
 &usb_1 {
 	status = "okay";
 };
 
 &usb_1_dwc3 {
-	/* TODO: Define USB-C connector properly */
 	dr_mode = "host";
 };
 
@@ -914,6 +1052,10 @@
 	status = "okay";
 };
 
+&usb_1_role_switch {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
 &vamacro {
 	pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
 	pinctrl-names = "default";
@@ -1147,6 +1289,40 @@
 		};
 	};
 
+	usb0_sbu_default: usb0-sbu-state {
+		oe-n-pins {
+			pins = "gpio101";
+			function = "gpio";
+			bias-disable;
+			drive-strengh = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio164";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	usb1_sbu_default: usb1-sbu-state {
+		oe-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			bias-disable;
+			drive-strengh = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio47";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
 	wcd_default: wcd-default-state {
 		reset-pins {
 			pins = "gpio106";

From c0ee8e0ba5cc17623e63349a168b41e407b1eef0 Mon Sep 17 00:00:00 2001
From: Konrad Dybcio <konrad.dybcio@linaro.org>
Date: Mon, 13 Feb 2023 22:29:30 +0100
Subject: [PATCH 09/17] arm64: dts: qcom: pmk8350: Use the correct PON
 compatible

A special compatible was introduced for PMK8350 both in the driver and
the bindings to facilitate for 2 base registers (PBS & HLOS). Use it.

Fixes: b2de43136058 ("arm64: dts: qcom: pmk8350: Add peripherals for pmk8350")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213212930.2115182-1-konrad.dybcio@linaro.org
---
 arch/arm64/boot/dts/qcom/pmk8350.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index 32f5e6af8c11..f26fb7d32faf 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -21,7 +21,7 @@
 		#size-cells = <0>;
 
 		pmk8350_pon: pon@1300 {
-			compatible = "qcom,pm8998-pon";
+			compatible = "qcom,pmk8350-pon";
 			reg = <0x1300>, <0x800>;
 			reg-names = "hlos", "pbs";
 

From 65aedb0b48c09595065c81722d9cca53760f7220 Mon Sep 17 00:00:00 2001
From: Luca Weiss <luca.weiss@fairphone.com>
Date: Mon, 13 Feb 2023 15:46:30 +0100
Subject: [PATCH 10/17] arm64: dts: qcom: sm7225-fairphone-fp4: move status
 property down

Currently the dts contains a mix of status-as-first-property (old qcom
style) and status-as-last-property (new style).

Move all status properties down to the bottom once and for all so that
the style is consistent between different nodes.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213-fp4-more-i2c-v2-1-1c459c572f80@fairphone.com
---
 .../boot/dts/qcom/sm7225-fairphone-fp4.dts    | 34 +++++++++----------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index f7602e93121a..86114dd2c0c4 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -110,8 +110,8 @@
 };
 
 &adsp {
-	status = "okay";
 	firmware-name = "qcom/sm7225/fairphone4/adsp.mdt";
+	status = "okay";
 };
 
 &apps_rsc {
@@ -355,13 +355,13 @@
 };
 
 &cdsp {
-	status = "okay";
 	firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt";
+	status = "okay";
 };
 
 &i2c10 {
-	status = "okay";
 	clock-frequency = <400000>;
+	status = "okay";
 
 	haptics@5a {
 		compatible = "awinic,aw8695";
@@ -396,8 +396,8 @@
 };
 
 &mpss {
-	status = "okay";
 	firmware-name = "qcom/sm7225/fairphone4/modem.mdt";
+	status = "okay";
 };
 
 &pm6150l_flash {
@@ -423,11 +423,11 @@
 };
 
 &pm6150l_wled {
-	status = "okay";
-
 	qcom,switching-freq = <800>;
 	qcom,current-limit-microamp = <20000>;
 	qcom,num-strings = <2>;
+
+	status = "okay";
 };
 
 &pm6350_gpios {
@@ -441,8 +441,8 @@
 };
 
 &pm6350_resin {
-	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
 };
 
 &pm7250b_adc {
@@ -535,21 +535,21 @@
 };
 
 &ufs_mem_hc {
-	status = "okay";
-
 	reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>;
 
 	vcc-supply = <&vreg_l7e>;
 	vcc-max-microamp = <800000>;
 	vccq2-supply = <&vreg_l12a>;
 	vccq2-max-microamp = <800000>;
+
+	status = "okay";
 };
 
 &ufs_mem_phy {
-	status = "okay";
-
 	vdda-phy-supply = <&vreg_l18a>;
 	vdda-pll-supply = <&vreg_l22a>;
+
+	status = "okay";
 };
 
 &usb_1 {
@@ -562,26 +562,26 @@
 };
 
 &usb_1_hsphy {
-	status = "okay";
-
 	vdd-supply = <&vreg_l18a>;
 	vdda-pll-supply = <&vreg_l2a>;
 	vdda-phy-dpdm-supply = <&vreg_l3a>;
+
+	status = "okay";
 };
 
 &usb_1_qmpphy {
-	status = "okay";
-
 	vdda-phy-supply = <&vreg_l22a>;
 	vdda-pll-supply = <&vreg_l16a>;
+
+	status = "okay";
 };
 
 &wifi {
-	status = "okay";
-
 	vdd-0.8-cx-mx-supply = <&vreg_l4a>;
 	vdd-1.8-xo-supply = <&vreg_l7a>;
 	vdd-1.3-rfa-supply = <&vreg_l2e>;
 	vdd-3.3-ch0-supply = <&vreg_l10e>;
 	vdd-3.3-ch1-supply = <&vreg_l11e>;
+
+	status = "okay";
 };

From 574f2ffd45dc786dc443c5e11ea477420ffa5f52 Mon Sep 17 00:00:00 2001
From: Luca Weiss <luca.weiss@fairphone.com>
Date: Mon, 13 Feb 2023 15:46:31 +0100
Subject: [PATCH 11/17] arm64: dts: qcom: sm7225-fairphone-fp4: enable
 remaining i2c busses

Enable all i2c busses where something is connected on this phone. Add
comments as placeholders for which components are still missing.

Also enable gpi_dma and the other qupv3 for that.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213-fp4-more-i2c-v2-2-1c459c572f80@fairphone.com
---
 .../boot/dts/qcom/sm7225-fairphone-fp4.dts    | 33 +++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index 86114dd2c0c4..7ae6aba5d2ec 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -359,10 +359,39 @@
 	status = "okay";
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* ST21NFCD NFC @ 8 */
+	/* VL53L3 ToF @ 29 */
+	/* AW88264A amplifier @ 34 */
+	/* AW88264A amplifier @ 35 */
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* HX83112A touchscreen @ 48 */
+};
+
 &i2c10 {
 	clock-frequency = <400000>;
 	status = "okay";
 
+	/* PM8008 PMIC @ 8 and 9 */
+	/* PX8618 @ 26 */
+	/* SMB1395 PMIC @ 34 */
+
 	haptics@5a {
 		compatible = "awinic,aw8695";
 		reg = <0x5a>;
@@ -495,6 +524,10 @@
 	};
 };
 
+&qupv3_id_0 {
+	status = "okay";
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };

From 2d5cab9232ba6bac734186f3e74fb106793bc738 Mon Sep 17 00:00:00 2001
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Date: Mon, 13 Feb 2023 14:31:18 +0530
Subject: [PATCH 12/17] arm64: dts: qcom: sc8280xp-pmics: Specify interrupt
 parent explicitly
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Nodes like pwrkey, resin, iadc, adc-tm, temp-alarm which are the grand
children of spmi_bus node represent the interrupt generating devices but
don't have "interrupt-parent" property.

As per the devicetree spec v0.3, section 2.4:

"The physical wiring of an interrupt source to an interrupt controller is
represented in the devicetree with the interrupt-parent property. Nodes
that represent interrupt-generating devices contain an interrupt-parent
property which has a phandle value that points to the device to which the
device’s interrupts are routed, typically an interrupt controller. If an
interrupt-generating device does not have an interrupt-parent property,
its interrupt parent is assumed to be its devicetree parent."

This clearly says that if the "interrupt-parent" property is absent, then
the immediate devicetree parent will be assumed as the interrupt parent.
But the immediate parents of these nodes are not interrupt controllers
themselves.

This may lead to failure while wiring the interrupt for these nodes by an
operating system. But a few operating systems like Linux, workaround this
issue by walking up the parent nodes until it finds the "interrupt-cells"
property. Then the node that has the "interrupt-cells" property will be
used as the interrupt parent.

But this workaround is not as per the DT spec and is not being implemented
by other operating systems such as OpenBSD.

Hence, fix this issue by adding the "interrupts-extended" property that
explicitly specifies the spmi_bus node as the interrupt parent. Note that
the "interrupts-extended" property is chosen over "interrupt-parent" as it
allows specifying both interrupt parent phandle and interrupt specifiers in
a single property.

Reported-by: Patrick Wildt <patrick@blueri.se>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213090118.11527-1-manivannan.sadhasivam@linaro.org
---
 arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
index f2c0b71b5d8e..df7d28f7ae60 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -64,14 +64,14 @@
 
 			pmk8280_pon_pwrkey: pwrkey {
 				compatible = "qcom,pmk8350-pwrkey";
-				interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+				interrupts-extended = <&spmi_bus 0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
 				linux,code = <KEY_POWER>;
 				status = "disabled";
 			};
 
 			pmk8280_pon_resin: resin {
 				compatible = "qcom,pmk8350-resin";
-				interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+				interrupts-extended = <&spmi_bus 0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
 				status = "disabled";
 			};
 		};
@@ -79,7 +79,7 @@
 		pmk8280_vadc: adc@3100 {
 			compatible = "qcom,spmi-adc7";
 			reg = <0x3100>;
-			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupts-extended = <&spmi_bus 0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#io-channel-cells = <1>;
@@ -89,7 +89,7 @@
 		pmk8280_adc_tm: adc-tm@3400 {
 			compatible = "qcom,spmi-adc-tm5-gen2";
 			reg = <0x3400>;
-			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupts-extended = <&spmi_bus 0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#thermal-sensor-cells = <1>;
@@ -106,7 +106,7 @@
 		pm8280_1_temp_alarm: temp-alarm@a00 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;
-			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			interrupts-extended = <&spmi_bus 0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 			#thermal-sensor-cells = <0>;
 		};
 
@@ -158,7 +158,7 @@
 		pm8280_2_temp_alarm: temp-alarm@a00 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;
-			interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 			#thermal-sensor-cells = <0>;
 		};
 

From f15c1b1bd3c2b3a688d1139593be6c620bb9af6f Mon Sep 17 00:00:00 2001
From: Owen Yang <ecs.taipeikernel@gmail.com>
Date: Mon, 13 Feb 2023 10:59:05 +0800
Subject: [PATCH 13/17] arm64: dts: qcom: sc7280: Adjust zombie PWM frequency

Tune the PWM to solve screen flashing issue and high frequency noise.
While at it, the comment for the PWM settings incorrectly said we were
using a 5kHz duty cycle. It should have said "period", not "duty cycle".
Correct this while updating the values.

Signed-off-by: Owen Yang <ecs.taipeikernel@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213105803.v2.1.I610cef0ead2d5df1f7bd18bc0e0ae040b03725d0@changeid
---
 arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
index 64deaaabac0f..a4fde22e3355 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
@@ -61,8 +61,8 @@ ap_tp_i2c: &i2c0 {
 };
 
 &pm8350c_pwm_backlight {
-	/* Set the PWM period to 200 microseconds (5kHz duty cycle) */
-	pwms = <&pm8350c_pwm 3 200000>;
+	/* Set the PWM period to 320 microseconds (3.125kHz frequency) */
+	pwms = <&pm8350c_pwm 3 320000>;
 };
 
 &pwmleds {

From 26e95ff8a912fd787a65ae1ae4cc4684f5f84fce Mon Sep 17 00:00:00 2001
From: Neil Armstrong <neil.armstrong@linaro.org>
Date: Thu, 9 Feb 2023 09:44:43 +0100
Subject: [PATCH 14/17] arm64: dts: qcom: sm8550: remove invalid interconnect
 property from cryptobam

The interconnect property is already present in the qce node, which
is the consumer of the cryptobam, so no need for an interconnect property
as documented by the bindings.

Fixes: 433477c3bf0b ("arm64: dts: qcom: sm8550: add QCrypto nodes")
Suggested-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209-topic-sm8550-upstream-cryptobam-remove-interconnect-v1-1-84587c7bad0f@linaro.org
---
 arch/arm64/boot/dts/qcom/sm8550.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 9910006c32aa..ff4d342c0725 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -1858,8 +1858,6 @@
 			qcom,controlled-remotely;
 			iommus = <&apps_smmu 0x480 0x0>,
 				 <&apps_smmu 0x481 0x0>;
-			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "memory";
 		};
 
 		crypto: crypto@1de0000 {

From 679ee73bbee28cab441008f8cca38160cc8f3d05 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Wed, 8 Feb 2023 11:15:39 +0100
Subject: [PATCH 15/17] arm64: dts: qcom: ipq6018: align RPM G-Link node with
 bindings

Bindings expect (and most of DTS use) the RPM G-Link node name to be
"rpm-requests".

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208101545.45711-1-krzysztof.kozlowski@linaro.org
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index d32c9b2515ee..bbd94025ff5d 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -176,7 +176,7 @@
 		qcom,rpm-msg-ram = <&rpm_msg_ram>;
 		mboxes = <&apcs_glb 0>;
 
-		rpm_requests: glink-channel {
+		rpm_requests: rpm-requests {
 			compatible = "qcom,rpm-ipq6018";
 			qcom,glink-channels = "rpm_requests";
 

From 7bf30eb441b3bdaa368e65837a03f9fbba033180 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Wed, 8 Feb 2023 11:15:40 +0100
Subject: [PATCH 16/17] arm64: dts: qcom: qcs404: align RPM G-Link node with
 bindings

Bindings expect (and most of DTS use) the RPM G-Link node name to be
"rpm-requests".

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208101545.45711-2-krzysztof.kozlowski@linaro.org
---
 arch/arm64/boot/dts/qcom/qcs404.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 9c9890cf1b10..bc2ed73afb74 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -223,7 +223,7 @@
 		qcom,rpm-msg-ram = <&rpm_msg_ram>;
 		mboxes = <&apcs_glb 0>;
 
-		rpm_requests: glink-channel {
+		rpm_requests: rpm-requests {
 			compatible = "qcom,rpm-qcs404";
 			qcom,glink-channels = "rpm_requests";
 

From 407ef897bd0275e38ae33d410857e71c092679bd Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Wed, 8 Feb 2023 11:15:41 +0100
Subject: [PATCH 17/17] arm64: dts: qcom: msm8996: align RPM G-Link
 clock-controller node with bindings

qcom,rpmcc bindings expect RPM clock controller to be named generic
"clock-controller":

  rpm-glink: rpm-requests: 'qcom,rpmcc' does not match any of the regexes: '^regulators(-[01])?$', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208101545.45711-3-krzysztof.kozlowski@linaro.org
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 6f180a8efe77..905678e7175d 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -483,7 +483,7 @@
 			compatible = "qcom,rpm-msm8996";
 			qcom,glink-channels = "rpm_requests";
 
-			rpmcc: qcom,rpmcc {
+			rpmcc: clock-controller {
 				compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc";
 				#clock-cells = <1>;
 				clocks = <&xo_board>;