Add driver for Phytium Hardware semaphore device found in E-series SoCs

add Phytium hwspinlock support for E-series Socs
verifyed on Phytium E2000D

Reviewed-by: Hongbo Mao <maohongbo@phytium.com.cn>
(cherry picked from commit effffb8226)
Signed-off-by: Alex Shi <alexsshi@tencent.com>

drivers/hwspinlock/Kconfig

@@ -16,6 +16,15 @@ config HWSPINLOCK_OMAP
 
 	  If unsure, say N.
 
+config HWSPINLOCK_PHYTIUM
+	tristate "Phytium Hardware Spinlock device"
+	depends on HWSPINLOCK
+	depends on ARCH_PHYTIUM
+	help
+	  Say y here to support the Phytium Hardware Spinlock device.
+
+	  If unsure, say N.
+
 config HWSPINLOCK_QCOM
 	tristate "Qualcomm Hardware Spinlock device"
 	depends on HWSPINLOCK

drivers/hwspinlock/Makefile

@@ -5,6 +5,7 @@
 
 obj-$(CONFIG_HWSPINLOCK)		+= hwspinlock_core.o
 obj-$(CONFIG_HWSPINLOCK_OMAP)		+= omap_hwspinlock.o
+obj-$(CONFIG_HWSPINLOCK_PHYTIUM)	+= phytium_hwspinlock.o
 obj-$(CONFIG_HWSPINLOCK_QCOM)		+= qcom_hwspinlock.o
 obj-$(CONFIG_HWSPINLOCK_SIRF)		+= sirf_hwspinlock.o
 obj-$(CONFIG_HWSPINLOCK_SPRD)		+= sprd_hwspinlock.o

drivers/hwspinlock/phytium_hwspinlock.c

@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Phytium hardware spinlock driver
+ *
+ * Copyright (C) 2021-2023, Phytium Technology Co., Ltd.
+ *
+ * Derived from drivers/hwspinlock/omap_hwspinlock.c
+ *   Copyright (C) 2010-2015 Texas Instruments Incorporated - http://www.ti.com
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/hwspinlock.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "hwspinlock_internal.h"
+
+/* Spinlock register offsets */
+#define LOCK_BASE	0x10
+
+#define SEMA_NOTTAKEN	(0)	/* free */
+#define SEMA_TAKEN	(1)	/* locked */
+
+static int phytium_hwspinlock_trylock(struct hwspinlock *lock)
+{
+	void __iomem *lock_addr = lock->priv;
+
+	/* attempt to acquire the lock by reading its value */
+	return (readl(lock_addr) == SEMA_NOTTAKEN);
+}
+
+static void phytium_hwspinlock_unlock(struct hwspinlock *lock)
+{
+	void __iomem *lock_addr = lock->priv;
+
+	/* release the lock by writing 0 to it */
+	writel(SEMA_NOTTAKEN, lock_addr);
+}
+
+static void phytium_hwspinlock_relax(struct hwspinlock *lock)
+{
+	ndelay(50);
+}
+
+static const struct hwspinlock_ops phytium_hwspinlock_ops = {
+	.trylock = phytium_hwspinlock_trylock,
+	.unlock = phytium_hwspinlock_unlock,
+	.relax = phytium_hwspinlock_relax,
+};
+
+static int phytium_hwspinlock_probe(struct platform_device *pdev)
+{
+	struct fwnode_handle *np = dev_fwnode(&(pdev->dev));
+	struct hwspinlock_device *bank;
+	struct hwspinlock *hwlock;
+	struct resource *res;
+	void __iomem *io_base;
+	int num_locks, i, ret;
+
+	if (!np)
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	io_base = ioremap(res->start, resource_size(res));
+	if (!io_base)
+		return -ENOMEM;
+
+	/*
+	 * make sure the module is enabled and clocked before reading
+	 * the module SYSSTATUS register
+	 */
+	pm_runtime_enable(&pdev->dev);
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(&pdev->dev);
+		goto iounmap_base;
+	}
+
+	/* Determine number of locks */
+	if (fwnode_property_read_u32(np, "nr-locks", &num_locks)) {
+		dev_err(&pdev->dev, "missing/invalid number of locks\n");
+		ret = -EINVAL;
+		goto iounmap_base;
+	}
+
+	/*
+	 * runtime PM will make sure the clock of this module is
+	 * enabled again iff at least one lock is requested
+	 */
+	ret = pm_runtime_put(&pdev->dev);
+	if (ret < 0)
+		goto iounmap_base;
+
+	bank = kzalloc(struct_size(bank, lock, num_locks), GFP_KERNEL);
+	if (!bank) {
+		ret = -ENOMEM;
+		goto iounmap_base;
+	}
+
+	platform_set_drvdata(pdev, bank);
+
+	for (i = 0, hwlock = &bank->lock[0]; i < num_locks; i++, hwlock++) {
+		/* Set register address of each lock */
+		hwlock->priv = io_base + LOCK_BASE + sizeof(u32) * i;
+	}
+
+	ret = hwspin_lock_register(bank, &pdev->dev, &phytium_hwspinlock_ops,
+				   0, num_locks);
+	if (ret)
+		goto reg_fail;
+
+	return 0;
+
+reg_fail:
+	kfree(bank);
+iounmap_base:
+	iounmap(io_base);
+	return ret;
+}
+
+static int phytium_hwspinlock_remove(struct platform_device *pdev)
+{
+	struct hwspinlock_device *bank = platform_get_drvdata(pdev);
+	void __iomem *io_base = bank->lock[0].priv - LOCK_BASE;
+	int ret;
+
+	ret = hwspin_lock_unregister(bank);
+	if (ret) {
+		dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
+		return ret;
+	}
+
+	iounmap(io_base);
+	kfree(bank);
+
+	return 0;
+}
+
+static const struct of_device_id phytium_hwspinlock_of_match[] = {
+	{ .compatible = "phytium,hwspinlock", },
+	{ /* end */ },
+};
+MODULE_DEVICE_TABLE(of, phytium_hwspinlock_of_match);
+
+static struct platform_driver phytium_hwspinlock_driver = {
+	.probe		= phytium_hwspinlock_probe,
+	.remove		= phytium_hwspinlock_remove,
+	.driver		= {
+		.name	= "phytium_hwspinlock",
+		.of_match_table = of_match_ptr(phytium_hwspinlock_of_match),
+	},
+};
+
+static int __init phytium_hwspinlock_init(void)
+{
+	return platform_driver_register(&phytium_hwspinlock_driver);
+}
+postcore_initcall(phytium_hwspinlock_init);
+
+static void __exit phytium_hwspinlock_exit(void)
+{
+	platform_driver_unregister(&phytium_hwspinlock_driver);
+}
+module_exit(phytium_hwspinlock_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Hardware spinlock driver for Phytium");
+MODULE_AUTHOR("Chen Baozi <chenbaozi@phytium.com.cn>");