NFC: st21nfcb: Move powered flag from phy to ndlc layer

The powered flag can be set from the ndlc_open and ndlc_close layer.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
Christophe Ricard 2015-06-06 13:16:50 +02:00 committed by Samuel Ortiz
parent e8b72c205e
commit 183fe2d06d
3 changed files with 5 additions and 5 deletions

View File

@ -52,8 +52,6 @@ struct st21nfcb_i2c_phy {
unsigned int gpio_reset;
unsigned int irq_polarity;
int powered;
};
#define I2C_DUMP_SKB(info, skb) \
@ -70,7 +68,6 @@ static int st21nfcb_nci_i2c_enable(void *phy_id)
gpio_set_value(phy->gpio_reset, 0);
usleep_range(10000, 15000);
gpio_set_value(phy->gpio_reset, 1);
phy->powered = 1;
usleep_range(80000, 85000);
return 0;
@ -80,7 +77,6 @@ static void st21nfcb_nci_i2c_disable(void *phy_id)
{
struct st21nfcb_i2c_phy *phy = phy_id;
phy->powered = 0;
/* reset chip in order to flush clf */
gpio_set_value(phy->gpio_reset, 0);
usleep_range(10000, 15000);
@ -203,7 +199,7 @@ static irqreturn_t st21nfcb_nci_irq_thread_fn(int irq, void *phy_id)
if (phy->ndlc->hard_fault)
return IRQ_HANDLED;
if (!phy->powered) {
if (!phy->ndlc->powered) {
st21nfcb_nci_i2c_disable(phy);
return IRQ_HANDLED;
}

View File

@ -59,6 +59,7 @@ int ndlc_open(struct llt_ndlc *ndlc)
{
/* toggle reset pin */
ndlc->ops->enable(ndlc->phy_id);
ndlc->powered = 1;
return 0;
}
EXPORT_SYMBOL(ndlc_open);
@ -67,6 +68,7 @@ void ndlc_close(struct llt_ndlc *ndlc)
{
/* toggle reset pin */
ndlc->ops->disable(ndlc->phy_id);
ndlc->powered = 0;
}
EXPORT_SYMBOL(ndlc_close);
@ -262,6 +264,7 @@ int ndlc_probe(void *phy_id, struct nfc_phy_ops *phy_ops, struct device *dev,
ndlc->ops = phy_ops;
ndlc->phy_id = phy_id;
ndlc->dev = dev;
ndlc->powered = 0;
*ndlc_id = ndlc;

View File

@ -47,6 +47,7 @@ struct llt_ndlc {
* and prevents normal operation.
*/
int hard_fault;
int powered;
};
int ndlc_open(struct llt_ndlc *ndlc);