mlxbf_gige: clear MDIO gateway lock after read

The MDIO gateway (GW) lock in BlueField-2 GIGE logic is
set after read.  This patch adds logic to make sure the
lock is always cleared at the end of each MDIO transaction.

Fixes: f92e1869d7 ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20220902164247.19862-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_mdio.c

@@ -179,6 +179,9 @@ static int mlxbf_gige_mdio_read(struct mii_bus *bus, int phy_add, int phy_reg)
 	/* Only return ad bits of the gw register */
 	ret &= MLXBF_GIGE_MDIO_GW_AD_MASK;
 
+	/* The MDIO lock is set on read. To release it, clear gw register */
+	writel(0, priv->mdio_io + MLXBF_GIGE_MDIO_GW_OFFSET);
+
 	return ret;
 }
 
@@ -203,6 +206,9 @@ static int mlxbf_gige_mdio_write(struct mii_bus *bus, int phy_add,
 					temp, !(temp & MLXBF_GIGE_MDIO_GW_BUSY_MASK),
 					5, 1000000);
 
+	/* The MDIO lock is set on read. To release it, clear gw register */
+	writel(0, priv->mdio_io + MLXBF_GIGE_MDIO_GW_OFFSET);
+
 	return ret;
 }