e1000e: cleanup PARENTHESIS_ALIGNMENT checkpatch checks
CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This commit is contained in:
parent
66501f567d
commit
17e813ec8c
|
@ -580,7 +580,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
|
|||
e_dbg("Waiting for forced speed/duplex link on GG82563 phy.\n");
|
||||
|
||||
ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
|
||||
100000, &link);
|
||||
100000, &link);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
|
@ -595,7 +595,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
|
|||
|
||||
/* Try once more */
|
||||
ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
|
||||
100000, &link);
|
||||
100000, &link);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
}
|
||||
|
@ -666,14 +666,12 @@ static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed,
|
|||
s32 ret_val;
|
||||
|
||||
if (hw->phy.media_type == e1000_media_type_copper) {
|
||||
ret_val = e1000e_get_speed_and_duplex_copper(hw,
|
||||
speed,
|
||||
duplex);
|
||||
ret_val = e1000e_get_speed_and_duplex_copper(hw, speed, duplex);
|
||||
hw->phy.ops.cfg_on_link_up(hw);
|
||||
} else {
|
||||
ret_val = e1000e_get_speed_and_duplex_fiber_serdes(hw,
|
||||
speed,
|
||||
duplex);
|
||||
speed,
|
||||
duplex);
|
||||
}
|
||||
|
||||
return ret_val;
|
||||
|
@ -823,7 +821,7 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
|
|||
E1000_KMRNCTRLSTA_OFFSET_SHIFT, &i);
|
||||
if (!ret_val) {
|
||||
if ((i & E1000_KMRNCTRLSTA_OPMODE_MASK) ==
|
||||
E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO)
|
||||
E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO)
|
||||
hw->dev_spec.e80003es2lan.mdic_wa_enable = false;
|
||||
}
|
||||
|
||||
|
@ -890,7 +888,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
|
|||
{
|
||||
struct e1000_phy_info *phy = &hw->phy;
|
||||
s32 ret_val;
|
||||
u32 ctrl_ext;
|
||||
u32 reg;
|
||||
u16 data;
|
||||
|
||||
ret_val = e1e_rphy(hw, GG82563_PHY_MAC_SPEC_CTRL, &data);
|
||||
|
@ -953,22 +951,19 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
|
|||
}
|
||||
|
||||
/* Bypass Rx and Tx FIFO's */
|
||||
ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
|
||||
E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL,
|
||||
E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS |
|
||||
E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS);
|
||||
reg = E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL;
|
||||
data = (E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS |
|
||||
E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS);
|
||||
ret_val = e1000_write_kmrn_reg_80003es2lan(hw, reg, data);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
ret_val = e1000_read_kmrn_reg_80003es2lan(hw,
|
||||
E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE,
|
||||
&data);
|
||||
reg = E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE;
|
||||
ret_val = e1000_read_kmrn_reg_80003es2lan(hw, reg, &data);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
data |= E1000_KMRNCTRLSTA_OPMODE_E_IDLE;
|
||||
ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
|
||||
E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE,
|
||||
data);
|
||||
ret_val = e1000_write_kmrn_reg_80003es2lan(hw, reg, data);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
|
@ -981,9 +976,9 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
|
|||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
ctrl_ext = er32(CTRL_EXT);
|
||||
ctrl_ext &= ~(E1000_CTRL_EXT_LINK_MODE_MASK);
|
||||
ew32(CTRL_EXT, ctrl_ext);
|
||||
reg = er32(CTRL_EXT);
|
||||
reg &= ~E1000_CTRL_EXT_LINK_MODE_MASK;
|
||||
ew32(CTRL_EXT, reg);
|
||||
|
||||
ret_val = e1e_rphy(hw, GG82563_PHY_PWR_MGMT_CTRL, &data);
|
||||
if (ret_val)
|
||||
|
|
|
@ -184,7 +184,7 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw)
|
|||
default:
|
||||
nvm->type = e1000_nvm_eeprom_spi;
|
||||
size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
|
||||
E1000_EECD_SIZE_EX_SHIFT);
|
||||
E1000_EECD_SIZE_EX_SHIFT);
|
||||
/* Added to a constant, "size" becomes the left-shift value
|
||||
* for setting word_size.
|
||||
*/
|
||||
|
|
|
@ -499,8 +499,8 @@ static int e1000_get_eeprom(struct net_device *netdev,
|
|||
first_word = eeprom->offset >> 1;
|
||||
last_word = (eeprom->offset + eeprom->len - 1) >> 1;
|
||||
|
||||
eeprom_buff = kmalloc(sizeof(u16) *
|
||||
(last_word - first_word + 1), GFP_KERNEL);
|
||||
eeprom_buff = kmalloc(sizeof(u16) * (last_word - first_word + 1),
|
||||
GFP_KERNEL);
|
||||
if (!eeprom_buff)
|
||||
return -ENOMEM;
|
||||
|
||||
|
@ -511,7 +511,7 @@ static int e1000_get_eeprom(struct net_device *netdev,
|
|||
} else {
|
||||
for (i = 0; i < last_word - first_word + 1; i++) {
|
||||
ret_val = e1000_read_nvm(hw, first_word + i, 1,
|
||||
&eeprom_buff[i]);
|
||||
&eeprom_buff[i]);
|
||||
if (ret_val)
|
||||
break;
|
||||
}
|
||||
|
@ -576,7 +576,7 @@ static int e1000_set_eeprom(struct net_device *netdev,
|
|||
/* need read/modify/write of last changed EEPROM word */
|
||||
/* only the first byte of the word is being modified */
|
||||
ret_val = e1000_read_nvm(hw, last_word, 1,
|
||||
&eeprom_buff[last_word - first_word]);
|
||||
&eeprom_buff[last_word - first_word]);
|
||||
|
||||
if (ret_val)
|
||||
goto out;
|
||||
|
@ -624,10 +624,10 @@ static void e1000_get_drvinfo(struct net_device *netdev,
|
|||
* PCI-E controllers
|
||||
*/
|
||||
snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
|
||||
"%d.%d-%d",
|
||||
(adapter->eeprom_vers & 0xF000) >> 12,
|
||||
(adapter->eeprom_vers & 0x0FF0) >> 4,
|
||||
(adapter->eeprom_vers & 0x000F));
|
||||
"%d.%d-%d",
|
||||
(adapter->eeprom_vers & 0xF000) >> 12,
|
||||
(adapter->eeprom_vers & 0x0FF0) >> 4,
|
||||
(adapter->eeprom_vers & 0x000F));
|
||||
|
||||
strlcpy(drvinfo->bus_info, pci_name(adapter->pdev),
|
||||
sizeof(drvinfo->bus_info));
|
||||
|
@ -966,8 +966,8 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
|
|||
if (!request_irq(irq, e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
|
||||
netdev)) {
|
||||
shared_int = 0;
|
||||
} else if (request_irq(irq, e1000_test_intr, IRQF_SHARED,
|
||||
netdev->name, netdev)) {
|
||||
} else if (request_irq(irq, e1000_test_intr, IRQF_SHARED, netdev->name,
|
||||
netdev)) {
|
||||
*data = 1;
|
||||
ret_val = -1;
|
||||
goto out;
|
||||
|
@ -1077,28 +1077,33 @@ static void e1000_free_desc_rings(struct e1000_adapter *adapter)
|
|||
struct e1000_ring *tx_ring = &adapter->test_tx_ring;
|
||||
struct e1000_ring *rx_ring = &adapter->test_rx_ring;
|
||||
struct pci_dev *pdev = adapter->pdev;
|
||||
struct e1000_buffer *buffer_info;
|
||||
int i;
|
||||
|
||||
if (tx_ring->desc && tx_ring->buffer_info) {
|
||||
for (i = 0; i < tx_ring->count; i++) {
|
||||
if (tx_ring->buffer_info[i].dma)
|
||||
buffer_info = &tx_ring->buffer_info[i];
|
||||
|
||||
if (buffer_info->dma)
|
||||
dma_unmap_single(&pdev->dev,
|
||||
tx_ring->buffer_info[i].dma,
|
||||
tx_ring->buffer_info[i].length,
|
||||
DMA_TO_DEVICE);
|
||||
if (tx_ring->buffer_info[i].skb)
|
||||
dev_kfree_skb(tx_ring->buffer_info[i].skb);
|
||||
buffer_info->dma,
|
||||
buffer_info->length,
|
||||
DMA_TO_DEVICE);
|
||||
if (buffer_info->skb)
|
||||
dev_kfree_skb(buffer_info->skb);
|
||||
}
|
||||
}
|
||||
|
||||
if (rx_ring->desc && rx_ring->buffer_info) {
|
||||
for (i = 0; i < rx_ring->count; i++) {
|
||||
if (rx_ring->buffer_info[i].dma)
|
||||
buffer_info = &rx_ring->buffer_info[i];
|
||||
|
||||
if (buffer_info->dma)
|
||||
dma_unmap_single(&pdev->dev,
|
||||
rx_ring->buffer_info[i].dma,
|
||||
2048, DMA_FROM_DEVICE);
|
||||
if (rx_ring->buffer_info[i].skb)
|
||||
dev_kfree_skb(rx_ring->buffer_info[i].skb);
|
||||
buffer_info->dma,
|
||||
2048, DMA_FROM_DEVICE);
|
||||
if (buffer_info->skb)
|
||||
dev_kfree_skb(buffer_info->skb);
|
||||
}
|
||||
}
|
||||
|
||||
|
@ -1561,7 +1566,7 @@ static int e1000_check_lbtest_frame(struct sk_buff *skb,
|
|||
frame_size &= ~1;
|
||||
if (*(skb->data + 3) == 0xFF)
|
||||
if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
|
||||
(*(skb->data + frame_size / 2 + 12) == 0xAF))
|
||||
(*(skb->data + frame_size / 2 + 12) == 0xAF))
|
||||
return 0;
|
||||
return 13;
|
||||
}
|
||||
|
@ -1572,6 +1577,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
|
|||
struct e1000_ring *rx_ring = &adapter->test_rx_ring;
|
||||
struct pci_dev *pdev = adapter->pdev;
|
||||
struct e1000_hw *hw = &adapter->hw;
|
||||
struct e1000_buffer *buffer_info;
|
||||
int i, j, k, l;
|
||||
int lc;
|
||||
int good_cnt;
|
||||
|
@ -1594,12 +1600,13 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
|
|||
l = 0;
|
||||
for (j = 0; j <= lc; j++) { /* loop count loop */
|
||||
for (i = 0; i < 64; i++) { /* send the packets */
|
||||
e1000_create_lbtest_frame(tx_ring->buffer_info[k].skb,
|
||||
1024);
|
||||
buffer_info = &tx_ring->buffer_info[k];
|
||||
|
||||
e1000_create_lbtest_frame(buffer_info->skb, 1024);
|
||||
dma_sync_single_for_device(&pdev->dev,
|
||||
tx_ring->buffer_info[k].dma,
|
||||
tx_ring->buffer_info[k].length,
|
||||
DMA_TO_DEVICE);
|
||||
buffer_info->dma,
|
||||
buffer_info->length,
|
||||
DMA_TO_DEVICE);
|
||||
k++;
|
||||
if (k == tx_ring->count)
|
||||
k = 0;
|
||||
|
@ -1610,12 +1617,14 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
|
|||
time = jiffies; /* set the start time for the receive */
|
||||
good_cnt = 0;
|
||||
do { /* receive the sent packets */
|
||||
dma_sync_single_for_cpu(&pdev->dev,
|
||||
rx_ring->buffer_info[l].dma, 2048,
|
||||
DMA_FROM_DEVICE);
|
||||
buffer_info = &rx_ring->buffer_info[l];
|
||||
|
||||
ret_val = e1000_check_lbtest_frame(
|
||||
rx_ring->buffer_info[l].skb, 1024);
|
||||
dma_sync_single_for_cpu(&pdev->dev,
|
||||
buffer_info->dma, 2048,
|
||||
DMA_FROM_DEVICE);
|
||||
|
||||
ret_val = e1000_check_lbtest_frame(buffer_info->skb,
|
||||
1024);
|
||||
if (!ret_val)
|
||||
good_cnt++;
|
||||
l++;
|
||||
|
|
|
@ -1804,8 +1804,8 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
|
|||
ew32(RCTL, mac_reg);
|
||||
|
||||
ret_val = e1000e_read_kmrn_reg(hw,
|
||||
E1000_KMRNCTRLSTA_CTRL_OFFSET,
|
||||
&data);
|
||||
E1000_KMRNCTRLSTA_CTRL_OFFSET,
|
||||
&data);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
ret_val = e1000e_write_kmrn_reg(hw,
|
||||
|
@ -1814,8 +1814,8 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
|
|||
if (ret_val)
|
||||
return ret_val;
|
||||
ret_val = e1000e_read_kmrn_reg(hw,
|
||||
E1000_KMRNCTRLSTA_HD_CTRL,
|
||||
&data);
|
||||
E1000_KMRNCTRLSTA_HD_CTRL,
|
||||
&data);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
data &= ~(0xF << 8);
|
||||
|
@ -1862,8 +1862,8 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
|
|||
ew32(RCTL, mac_reg);
|
||||
|
||||
ret_val = e1000e_read_kmrn_reg(hw,
|
||||
E1000_KMRNCTRLSTA_CTRL_OFFSET,
|
||||
&data);
|
||||
E1000_KMRNCTRLSTA_CTRL_OFFSET,
|
||||
&data);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
ret_val = e1000e_write_kmrn_reg(hw,
|
||||
|
@ -1872,8 +1872,8 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
|
|||
if (ret_val)
|
||||
return ret_val;
|
||||
ret_val = e1000e_read_kmrn_reg(hw,
|
||||
E1000_KMRNCTRLSTA_HD_CTRL,
|
||||
&data);
|
||||
E1000_KMRNCTRLSTA_HD_CTRL,
|
||||
&data);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
data &= ~(0xF << 8);
|
||||
|
@ -2653,8 +2653,9 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
|
|||
|
||||
ew32flash(ICH_FLASH_FADDR, flash_linear_addr);
|
||||
|
||||
ret_val = e1000_flash_cycle_ich8lan(hw,
|
||||
ICH_FLASH_READ_COMMAND_TIMEOUT);
|
||||
ret_val =
|
||||
e1000_flash_cycle_ich8lan(hw,
|
||||
ICH_FLASH_READ_COMMAND_TIMEOUT);
|
||||
|
||||
/* Check if FCERR is set to 1, if set to 1, clear it
|
||||
* and try the whole sequence a few more times, else
|
||||
|
@ -3017,8 +3018,9 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
|
|||
/* check if FCERR is set to 1 , if set to 1, clear it
|
||||
* and try the whole sequence a few more times else done
|
||||
*/
|
||||
ret_val = e1000_flash_cycle_ich8lan(hw,
|
||||
ICH_FLASH_WRITE_COMMAND_TIMEOUT);
|
||||
ret_val =
|
||||
e1000_flash_cycle_ich8lan(hw,
|
||||
ICH_FLASH_WRITE_COMMAND_TIMEOUT);
|
||||
if (!ret_val)
|
||||
break;
|
||||
|
||||
|
@ -3150,6 +3152,8 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
|
|||
|
||||
for (j = 0; j < iteration ; j++) {
|
||||
do {
|
||||
u32 timeout = ICH_FLASH_ERASE_COMMAND_TIMEOUT;
|
||||
|
||||
/* Steps */
|
||||
ret_val = e1000_flash_cycle_init_ich8lan(hw);
|
||||
if (ret_val)
|
||||
|
@ -3169,8 +3173,7 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
|
|||
flash_linear_addr += (j * sector_size);
|
||||
ew32flash(ICH_FLASH_FADDR, flash_linear_addr);
|
||||
|
||||
ret_val = e1000_flash_cycle_ich8lan(hw,
|
||||
ICH_FLASH_ERASE_COMMAND_TIMEOUT);
|
||||
ret_val = e1000_flash_cycle_ich8lan(hw, timeout);
|
||||
if (!ret_val)
|
||||
break;
|
||||
|
||||
|
@ -3625,8 +3628,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
|
|||
*/
|
||||
hw->fc.current_mode = hw->fc.requested_mode;
|
||||
|
||||
e_dbg("After fix-ups FlowControl is now = %x\n",
|
||||
hw->fc.current_mode);
|
||||
e_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode);
|
||||
|
||||
/* Continue to configure the copper link. */
|
||||
ret_val = hw->mac.ops.setup_physical_interface(hw);
|
||||
|
@ -3838,7 +3840,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw)
|
|||
* /disabled - false).
|
||||
**/
|
||||
void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
|
||||
bool state)
|
||||
bool state)
|
||||
{
|
||||
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
|
||||
|
||||
|
@ -3920,12 +3922,12 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw)
|
|||
return;
|
||||
|
||||
ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
|
||||
®_data);
|
||||
®_data);
|
||||
if (ret_val)
|
||||
return;
|
||||
reg_data |= E1000_KMRNCTRLSTA_DIAG_NELPBK;
|
||||
ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
|
||||
reg_data);
|
||||
reg_data);
|
||||
if (ret_val)
|
||||
return;
|
||||
reg_data &= ~E1000_KMRNCTRLSTA_DIAG_NELPBK;
|
||||
|
|
|
@ -1430,7 +1430,7 @@ copydone:
|
|||
e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
|
||||
|
||||
if (rx_desc->wb.upper.header_status &
|
||||
cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))
|
||||
cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))
|
||||
adapter->rx_hdr_split++;
|
||||
|
||||
e1000_receive_skb(adapter, netdev, skb, staterr,
|
||||
|
@ -1496,6 +1496,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_ring *rx_ring, int *work_done,
|
|||
int cleaned_count = 0;
|
||||
bool cleaned = false;
|
||||
unsigned int total_rx_bytes = 0, total_rx_packets = 0;
|
||||
struct skb_shared_info *shinfo;
|
||||
|
||||
i = rx_ring->next_to_clean;
|
||||
rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
|
||||
|
@ -1552,9 +1553,10 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_ring *rx_ring, int *work_done,
|
|||
0, length);
|
||||
} else {
|
||||
/* this is the middle of a chain */
|
||||
skb_fill_page_desc(rxtop,
|
||||
skb_shinfo(rxtop)->nr_frags,
|
||||
buffer_info->page, 0, length);
|
||||
shinfo = skb_shinfo(rxtop);
|
||||
skb_fill_page_desc(rxtop, shinfo->nr_frags,
|
||||
buffer_info->page, 0,
|
||||
length);
|
||||
/* re-use the skb, only consumed the page */
|
||||
buffer_info->skb = skb;
|
||||
}
|
||||
|
@ -1563,9 +1565,10 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_ring *rx_ring, int *work_done,
|
|||
} else {
|
||||
if (rxtop) {
|
||||
/* end of the chain */
|
||||
skb_fill_page_desc(rxtop,
|
||||
skb_shinfo(rxtop)->nr_frags,
|
||||
buffer_info->page, 0, length);
|
||||
shinfo = skb_shinfo(rxtop);
|
||||
skb_fill_page_desc(rxtop, shinfo->nr_frags,
|
||||
buffer_info->page, 0,
|
||||
length);
|
||||
/* re-use the current skb, we only consumed the
|
||||
* page
|
||||
*/
|
||||
|
@ -1719,7 +1722,8 @@ static void e1000_clean_rx_ring(struct e1000_ring *rx_ring)
|
|||
static void e1000e_downshift_workaround(struct work_struct *work)
|
||||
{
|
||||
struct e1000_adapter *adapter = container_of(work,
|
||||
struct e1000_adapter, downshift_task);
|
||||
struct e1000_adapter,
|
||||
downshift_task);
|
||||
|
||||
if (test_bit(__E1000_DOWN, &adapter->state))
|
||||
return;
|
||||
|
@ -2044,8 +2048,9 @@ void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
|
|||
if (adapter->flags & FLAG_HAS_MSIX) {
|
||||
adapter->num_vectors = 3; /* RxQ0, TxQ0 and other */
|
||||
adapter->msix_entries = kcalloc(adapter->num_vectors,
|
||||
sizeof(struct msix_entry),
|
||||
GFP_KERNEL);
|
||||
sizeof(struct
|
||||
msix_entry),
|
||||
GFP_KERNEL);
|
||||
if (adapter->msix_entries) {
|
||||
for (i = 0; i < adapter->num_vectors; i++)
|
||||
adapter->msix_entries[i].entry = i;
|
||||
|
@ -3854,13 +3859,13 @@ void e1000e_reset(struct e1000_adapter *adapter)
|
|||
if ((adapter->max_frame_size * 2) > (pba << 10)) {
|
||||
if (!(adapter->flags2 & FLAG2_DISABLE_AIM)) {
|
||||
dev_info(&adapter->pdev->dev,
|
||||
"Interrupt Throttle Rate turned off\n");
|
||||
"Interrupt Throttle Rate off\n");
|
||||
adapter->flags2 |= FLAG2_DISABLE_AIM;
|
||||
e1000e_write_itr(adapter, 0);
|
||||
}
|
||||
} else if (adapter->flags2 & FLAG2_DISABLE_AIM) {
|
||||
dev_info(&adapter->pdev->dev,
|
||||
"Interrupt Throttle Rate turned on\n");
|
||||
"Interrupt Throttle Rate on\n");
|
||||
adapter->flags2 &= ~FLAG2_DISABLE_AIM;
|
||||
adapter->itr = 20000;
|
||||
e1000e_write_itr(adapter, adapter->itr);
|
||||
|
@ -4429,7 +4434,8 @@ static int e1000_set_mac(struct net_device *netdev, void *p)
|
|||
static void e1000e_update_phy_task(struct work_struct *work)
|
||||
{
|
||||
struct e1000_adapter *adapter = container_of(work,
|
||||
struct e1000_adapter, update_phy_task);
|
||||
struct e1000_adapter,
|
||||
update_phy_task);
|
||||
|
||||
if (test_bit(__E1000_DOWN, &adapter->state))
|
||||
return;
|
||||
|
@ -4789,7 +4795,8 @@ static void e1000_watchdog(unsigned long data)
|
|||
static void e1000_watchdog_task(struct work_struct *work)
|
||||
{
|
||||
struct e1000_adapter *adapter = container_of(work,
|
||||
struct e1000_adapter, watchdog_task);
|
||||
struct e1000_adapter,
|
||||
watchdog_task);
|
||||
struct net_device *netdev = adapter->netdev;
|
||||
struct e1000_mac_info *mac = &adapter->hw.mac;
|
||||
struct e1000_phy_info *phy = &adapter->hw.phy;
|
||||
|
@ -4823,8 +4830,8 @@ static void e1000_watchdog_task(struct work_struct *work)
|
|||
/* update snapshot of PHY registers on LSC */
|
||||
e1000_phy_read_status(adapter);
|
||||
mac->ops.get_link_up_info(&adapter->hw,
|
||||
&adapter->link_speed,
|
||||
&adapter->link_duplex);
|
||||
&adapter->link_speed,
|
||||
&adapter->link_duplex);
|
||||
e1000_print_link_info(adapter);
|
||||
|
||||
/* check if SmartSpeed worked */
|
||||
|
@ -4937,7 +4944,7 @@ static void e1000_watchdog_task(struct work_struct *work)
|
|||
adapter->flags |= FLAG_RESTART_NOW;
|
||||
else
|
||||
pm_schedule_suspend(netdev->dev.parent,
|
||||
LINK_TIMEOUT);
|
||||
LINK_TIMEOUT);
|
||||
}
|
||||
}
|
||||
|
||||
|
@ -4972,8 +4979,8 @@ link_up:
|
|||
*/
|
||||
u32 goc = (adapter->gotc + adapter->gorc) / 10000;
|
||||
u32 dif = (adapter->gotc > adapter->gorc ?
|
||||
adapter->gotc - adapter->gorc :
|
||||
adapter->gorc - adapter->gotc) / 10000;
|
||||
adapter->gotc - adapter->gorc :
|
||||
adapter->gorc - adapter->gotc) / 10000;
|
||||
u32 itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
|
||||
|
||||
e1000e_write_itr(adapter, itr);
|
||||
|
@ -5211,7 +5218,8 @@ static int e1000_tx_map(struct e1000_ring *tx_ring, struct sk_buff *skb,
|
|||
buffer_info->time_stamp = jiffies;
|
||||
buffer_info->next_to_watch = i;
|
||||
buffer_info->dma = skb_frag_dma_map(&pdev->dev, frag,
|
||||
offset, size, DMA_TO_DEVICE);
|
||||
offset, size,
|
||||
DMA_TO_DEVICE);
|
||||
buffer_info->mapped_as_page = true;
|
||||
if (dma_mapping_error(&pdev->dev, buffer_info->dma))
|
||||
goto dma_error;
|
||||
|
@ -5669,9 +5677,9 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
|
|||
|
||||
/* adjust allocation if LPE protects us, and we aren't using SBP */
|
||||
if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
|
||||
(max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
|
||||
(max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
|
||||
adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
|
||||
+ ETH_FCS_LEN;
|
||||
+ ETH_FCS_LEN;
|
||||
|
||||
if (netif_running(netdev))
|
||||
e1000e_up(adapter);
|
||||
|
@ -5850,7 +5858,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
|
|||
phy_reg &= ~(BM_RCTL_MO_MASK);
|
||||
if (mac_reg & E1000_RCTL_MO_3)
|
||||
phy_reg |= (((mac_reg & E1000_RCTL_MO_3) >> E1000_RCTL_MO_SHIFT)
|
||||
<< BM_RCTL_MO_SHIFT);
|
||||
<< BM_RCTL_MO_SHIFT);
|
||||
if (mac_reg & E1000_RCTL_BAM)
|
||||
phy_reg |= BM_RCTL_BAM;
|
||||
if (mac_reg & E1000_RCTL_PMCF)
|
||||
|
@ -6098,24 +6106,24 @@ static int __e1000_resume(struct pci_dev *pdev)
|
|||
e1e_rphy(&adapter->hw, BM_WUS, &phy_data);
|
||||
if (phy_data) {
|
||||
e_info("PHY Wakeup cause - %s\n",
|
||||
phy_data & E1000_WUS_EX ? "Unicast Packet" :
|
||||
phy_data & E1000_WUS_MC ? "Multicast Packet" :
|
||||
phy_data & E1000_WUS_BC ? "Broadcast Packet" :
|
||||
phy_data & E1000_WUS_MAG ? "Magic Packet" :
|
||||
phy_data & E1000_WUS_LNKC ?
|
||||
"Link Status Change" : "other");
|
||||
phy_data & E1000_WUS_EX ? "Unicast Packet" :
|
||||
phy_data & E1000_WUS_MC ? "Multicast Packet" :
|
||||
phy_data & E1000_WUS_BC ? "Broadcast Packet" :
|
||||
phy_data & E1000_WUS_MAG ? "Magic Packet" :
|
||||
phy_data & E1000_WUS_LNKC ?
|
||||
"Link Status Change" : "other");
|
||||
}
|
||||
e1e_wphy(&adapter->hw, BM_WUS, ~0);
|
||||
} else {
|
||||
u32 wus = er32(WUS);
|
||||
if (wus) {
|
||||
e_info("MAC Wakeup cause - %s\n",
|
||||
wus & E1000_WUS_EX ? "Unicast Packet" :
|
||||
wus & E1000_WUS_MC ? "Multicast Packet" :
|
||||
wus & E1000_WUS_BC ? "Broadcast Packet" :
|
||||
wus & E1000_WUS_MAG ? "Magic Packet" :
|
||||
wus & E1000_WUS_LNKC ? "Link Status Change" :
|
||||
"other");
|
||||
wus & E1000_WUS_EX ? "Unicast Packet" :
|
||||
wus & E1000_WUS_MC ? "Multicast Packet" :
|
||||
wus & E1000_WUS_BC ? "Broadcast Packet" :
|
||||
wus & E1000_WUS_MAG ? "Magic Packet" :
|
||||
wus & E1000_WUS_LNKC ? "Link Status Change" :
|
||||
"other");
|
||||
}
|
||||
ew32(WUS, ~0);
|
||||
}
|
||||
|
@ -6514,7 +6522,7 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|||
resource_size_t flash_start, flash_len;
|
||||
static int cards_found;
|
||||
u16 aspm_disable_flag = 0;
|
||||
int i, err, pci_using_dac;
|
||||
int bars, i, err, pci_using_dac;
|
||||
u16 eeprom_data = 0;
|
||||
u16 eeprom_apme_mask = E1000_EEPROM_APME;
|
||||
|
||||
|
@ -6548,9 +6556,9 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|||
}
|
||||
}
|
||||
|
||||
err = pci_request_selected_regions_exclusive(pdev,
|
||||
pci_select_bars(pdev, IORESOURCE_MEM),
|
||||
e1000e_driver_name);
|
||||
bars = pci_select_bars(pdev, IORESOURCE_MEM);
|
||||
err = pci_request_selected_regions_exclusive(pdev, bars,
|
||||
e1000e_driver_name);
|
||||
if (err)
|
||||
goto err_pci_reg;
|
||||
|
||||
|
@ -6995,8 +7003,8 @@ MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
|
|||
#ifdef CONFIG_PM
|
||||
static const struct dev_pm_ops e1000_pm_ops = {
|
||||
SET_SYSTEM_SLEEP_PM_OPS(e1000_suspend, e1000_resume)
|
||||
SET_RUNTIME_PM_OPS(e1000_runtime_suspend,
|
||||
e1000_runtime_resume, e1000_idle)
|
||||
SET_RUNTIME_PM_OPS(e1000_runtime_suspend, e1000_runtime_resume,
|
||||
e1000_idle)
|
||||
};
|
||||
#endif
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@
|
|||
unsigned int copybreak = COPYBREAK_DEFAULT;
|
||||
module_param(copybreak, uint, 0644);
|
||||
MODULE_PARM_DESC(copybreak,
|
||||
"Maximum size of packet that is copied to a new buffer on receive");
|
||||
"Maximum size of packet that is copied to a new buffer on receive");
|
||||
|
||||
/* All parameters are treated the same, as an integer array of values.
|
||||
* This macro just reduces the need to repeat the same declaration code
|
||||
|
@ -478,18 +478,17 @@ void e1000e_check_options(struct e1000_adapter *adapter)
|
|||
.err = "defaulting to Enabled",
|
||||
.def = OPTION_ENABLED
|
||||
};
|
||||
bool enabled = opt.def;
|
||||
|
||||
if (num_KumeranLockLoss > bd) {
|
||||
unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
|
||||
e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
|
||||
if (hw->mac.type == e1000_ich8lan)
|
||||
e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
|
||||
kmrn_lock_loss);
|
||||
} else {
|
||||
if (hw->mac.type == e1000_ich8lan)
|
||||
e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
|
||||
opt.def);
|
||||
enabled = kmrn_lock_loss;
|
||||
}
|
||||
|
||||
if (hw->mac.type == e1000_ich8lan)
|
||||
e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
|
||||
enabled);
|
||||
}
|
||||
{ /* Write-protect NVM */
|
||||
static const struct e1000_option opt = {
|
||||
|
|
|
@ -410,8 +410,7 @@ static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
|
|||
(u16)offset);
|
||||
if (!ret_val)
|
||||
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS &
|
||||
offset,
|
||||
data);
|
||||
offset, data);
|
||||
if (!locked)
|
||||
hw->phy.ops.release(hw);
|
||||
|
||||
|
@ -1296,7 +1295,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
|
|||
e_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
|
||||
|
||||
ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
|
||||
100000, &link);
|
||||
100000, &link);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
|
@ -1319,7 +1318,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
|
|||
|
||||
/* Try once more */
|
||||
ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
|
||||
100000, &link);
|
||||
100000, &link);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
}
|
||||
|
@ -1733,7 +1732,7 @@ static s32 e1000_wait_autoneg(struct e1000_hw *hw)
|
|||
* Polls the PHY status register for link, 'iterations' number of times.
|
||||
**/
|
||||
s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
|
||||
u32 usec_interval, bool *success)
|
||||
u32 usec_interval, bool *success)
|
||||
{
|
||||
s32 ret_val = 0;
|
||||
u16 i, phy_status;
|
||||
|
|
Loading…
Reference in New Issue