diff --git a/drivers/net/ethernet/qlogic/qede/qede.h b/drivers/net/ethernet/qlogic/qede/qede.h index a687e7a1dc8d..ff3ac0caad5b 100644 --- a/drivers/net/ethernet/qlogic/qede/qede.h +++ b/drivers/net/ethernet/qlogic/qede/qede.h @@ -308,6 +308,10 @@ void qede_reload(struct qede_dev *edev, union qede_reload_args *args); int qede_change_mtu(struct net_device *dev, int new_mtu); void qede_fill_by_demand_stats(struct qede_dev *edev); +bool qede_has_rx_work(struct qede_rx_queue *rxq); +int qede_txq_has_work(struct qede_tx_queue *txq); +void qede_recycle_rx_bd_ring(struct qede_rx_queue *rxq, struct qede_dev *edev, + u8 count); #define RX_RING_SIZE_POW 13 #define RX_RING_SIZE ((u16)BIT(RX_RING_SIZE_POW)) diff --git a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c index e25a05ba0249..0d04f163ae45 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c +++ b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include @@ -27,6 +28,9 @@ #define QEDE_RQSTAT_STRING(stat_name) (#stat_name) #define QEDE_RQSTAT(stat_name) \ {QEDE_RQSTAT_OFFSET(stat_name), QEDE_RQSTAT_STRING(stat_name)} + +#define QEDE_SELFTEST_POLL_COUNT 100 + static const struct { u64 offset; char string[ETH_GSTRING_LEN]; @@ -126,6 +130,7 @@ static const char qede_private_arr[QEDE_PRI_FLAG_LEN][ETH_GSTRING_LEN] = { }; enum qede_ethtool_tests { + QEDE_ETHTOOL_INT_LOOPBACK, QEDE_ETHTOOL_INTERRUPT_TEST, QEDE_ETHTOOL_MEMORY_TEST, QEDE_ETHTOOL_REGISTER_TEST, @@ -134,6 +139,7 @@ enum qede_ethtool_tests { }; static const char qede_tests_str_arr[QEDE_ETHTOOL_TEST_MAX][ETH_GSTRING_LEN] = { + "Internal loopback (offline)", "Interrupt (online)\t", "Memory (online)\t\t", "Register (online)\t", @@ -847,6 +853,226 @@ static int qede_set_rxfh(struct net_device *dev, const u32 *indir, return 0; } +/* This function enables the interrupt generation and the NAPI on the device */ +static void qede_netif_start(struct qede_dev *edev) +{ + int i; + + if (!netif_running(edev->ndev)) + return; + + for_each_rss(i) { + /* Update and reenable interrupts */ + qed_sb_ack(edev->fp_array[i].sb_info, IGU_INT_ENABLE, 1); + napi_enable(&edev->fp_array[i].napi); + } +} + +/* This function disables the NAPI and the interrupt generation on the device */ +static void qede_netif_stop(struct qede_dev *edev) +{ + int i; + + for_each_rss(i) { + napi_disable(&edev->fp_array[i].napi); + /* Disable interrupts */ + qed_sb_ack(edev->fp_array[i].sb_info, IGU_INT_DISABLE, 0); + } +} + +static int qede_selftest_transmit_traffic(struct qede_dev *edev, + struct sk_buff *skb) +{ + struct qede_tx_queue *txq = &edev->fp_array[0].txqs[0]; + struct eth_tx_1st_bd *first_bd; + dma_addr_t mapping; + int i, idx, val; + + /* Fill the entry in the SW ring and the BDs in the FW ring */ + idx = txq->sw_tx_prod & NUM_TX_BDS_MAX; + txq->sw_tx_ring[idx].skb = skb; + first_bd = qed_chain_produce(&txq->tx_pbl); + memset(first_bd, 0, sizeof(*first_bd)); + val = 1 << ETH_TX_1ST_BD_FLAGS_START_BD_SHIFT; + first_bd->data.bd_flags.bitfields = val; + + /* Map skb linear data for DMA and set in the first BD */ + mapping = dma_map_single(&edev->pdev->dev, skb->data, + skb_headlen(skb), DMA_TO_DEVICE); + if (unlikely(dma_mapping_error(&edev->pdev->dev, mapping))) { + DP_NOTICE(edev, "SKB mapping failed\n"); + return -ENOMEM; + } + BD_SET_UNMAP_ADDR_LEN(first_bd, mapping, skb_headlen(skb)); + + /* update the first BD with the actual num BDs */ + first_bd->data.nbds = 1; + txq->sw_tx_prod++; + /* 'next page' entries are counted in the producer value */ + val = cpu_to_le16(qed_chain_get_prod_idx(&txq->tx_pbl)); + txq->tx_db.data.bd_prod = val; + + /* wmb makes sure that the BDs data is updated before updating the + * producer, otherwise FW may read old data from the BDs. + */ + wmb(); + barrier(); + writel(txq->tx_db.raw, txq->doorbell_addr); + + /* mmiowb is needed to synchronize doorbell writes from more than one + * processor. It guarantees that the write arrives to the device before + * the queue lock is released and another start_xmit is called (possibly + * on another CPU). Without this barrier, the next doorbell can bypass + * this doorbell. This is applicable to IA64/Altix systems. + */ + mmiowb(); + + for (i = 0; i < QEDE_SELFTEST_POLL_COUNT; i++) { + if (qede_txq_has_work(txq)) + break; + usleep_range(100, 200); + } + + if (!qede_txq_has_work(txq)) { + DP_NOTICE(edev, "Tx completion didn't happen\n"); + return -1; + } + + first_bd = (struct eth_tx_1st_bd *)qed_chain_consume(&txq->tx_pbl); + dma_unmap_page(&edev->pdev->dev, BD_UNMAP_ADDR(first_bd), + BD_UNMAP_LEN(first_bd), DMA_TO_DEVICE); + txq->sw_tx_cons++; + txq->sw_tx_ring[idx].skb = NULL; + + return 0; +} + +static int qede_selftest_receive_traffic(struct qede_dev *edev) +{ + struct qede_rx_queue *rxq = edev->fp_array[0].rxq; + u16 hw_comp_cons, sw_comp_cons, sw_rx_index, len; + struct eth_fast_path_rx_reg_cqe *fp_cqe; + struct sw_rx_data *sw_rx_data; + union eth_rx_cqe *cqe; + u8 *data_ptr; + int i; + + /* The packet is expected to receive on rx-queue 0 even though RSS is + * enabled. This is because the queue 0 is configured as the default + * queue and that the loopback traffic is not IP. + */ + for (i = 0; i < QEDE_SELFTEST_POLL_COUNT; i++) { + if (qede_has_rx_work(rxq)) + break; + usleep_range(100, 200); + } + + if (!qede_has_rx_work(rxq)) { + DP_NOTICE(edev, "Failed to receive the traffic\n"); + return -1; + } + + hw_comp_cons = le16_to_cpu(*rxq->hw_cons_ptr); + sw_comp_cons = qed_chain_get_cons_idx(&rxq->rx_comp_ring); + + /* Memory barrier to prevent the CPU from doing speculative reads of CQE + * / BD before reading hw_comp_cons. If the CQE is read before it is + * written by FW, then FW writes CQE and SB, and then the CPU reads the + * hw_comp_cons, it will use an old CQE. + */ + rmb(); + + /* Get the CQE from the completion ring */ + cqe = (union eth_rx_cqe *)qed_chain_consume(&rxq->rx_comp_ring); + + /* Get the data from the SW ring */ + sw_rx_index = rxq->sw_rx_cons & NUM_RX_BDS_MAX; + sw_rx_data = &rxq->sw_rx_ring[sw_rx_index]; + fp_cqe = &cqe->fast_path_regular; + len = le16_to_cpu(fp_cqe->len_on_first_bd); + data_ptr = (u8 *)(page_address(sw_rx_data->data) + + fp_cqe->placement_offset + sw_rx_data->page_offset); + for (i = ETH_HLEN; i < len; i++) + if (data_ptr[i] != (unsigned char)(i & 0xff)) { + DP_NOTICE(edev, "Loopback test failed\n"); + qede_recycle_rx_bd_ring(rxq, edev, 1); + return -1; + } + + qede_recycle_rx_bd_ring(rxq, edev, 1); + + return 0; +} + +static int qede_selftest_run_loopback(struct qede_dev *edev, u32 loopback_mode) +{ + struct qed_link_params link_params; + struct sk_buff *skb = NULL; + int rc = 0, i; + u32 pkt_size; + u8 *packet; + + if (!netif_running(edev->ndev)) { + DP_NOTICE(edev, "Interface is down\n"); + return -EINVAL; + } + + qede_netif_stop(edev); + + /* Bring up the link in Loopback mode */ + memset(&link_params, 0, sizeof(link_params)); + link_params.link_up = true; + link_params.override_flags = QED_LINK_OVERRIDE_LOOPBACK_MODE; + link_params.loopback_mode = loopback_mode; + edev->ops->common->set_link(edev->cdev, &link_params); + + /* Wait for loopback configuration to apply */ + msleep_interruptible(500); + + /* prepare the loopback packet */ + pkt_size = edev->ndev->mtu + ETH_HLEN; + + skb = netdev_alloc_skb(edev->ndev, pkt_size); + if (!skb) { + DP_INFO(edev, "Can't allocate skb\n"); + rc = -ENOMEM; + goto test_loopback_exit; + } + packet = skb_put(skb, pkt_size); + ether_addr_copy(packet, edev->ndev->dev_addr); + ether_addr_copy(packet + ETH_ALEN, edev->ndev->dev_addr); + memset(packet + (2 * ETH_ALEN), 0x77, (ETH_HLEN - (2 * ETH_ALEN))); + for (i = ETH_HLEN; i < pkt_size; i++) + packet[i] = (unsigned char)(i & 0xff); + + rc = qede_selftest_transmit_traffic(edev, skb); + if (rc) + goto test_loopback_exit; + + rc = qede_selftest_receive_traffic(edev); + if (rc) + goto test_loopback_exit; + + DP_VERBOSE(edev, NETIF_MSG_RX_STATUS, "Loopback test successful\n"); + +test_loopback_exit: + dev_kfree_skb(skb); + + /* Bring up the link in Normal mode */ + memset(&link_params, 0, sizeof(link_params)); + link_params.link_up = true; + link_params.override_flags = QED_LINK_OVERRIDE_LOOPBACK_MODE; + link_params.loopback_mode = QED_LINK_LOOPBACK_NONE; + edev->ops->common->set_link(edev->cdev, &link_params); + + /* Wait for loopback configuration to apply */ + msleep_interruptible(500); + + qede_netif_start(edev); + + return rc; +} + static void qede_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *buf) { @@ -859,6 +1085,14 @@ static void qede_self_test(struct net_device *dev, memset(buf, 0, sizeof(u64) * QEDE_ETHTOOL_TEST_MAX); + if (etest->flags & ETH_TEST_FL_OFFLINE) { + if (qede_selftest_run_loopback(edev, + QED_LINK_LOOPBACK_INT_PHY)) { + buf[QEDE_ETHTOOL_INT_LOOPBACK] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + } + } + if (edev->ops->common->selftest->selftest_interrupt(edev->cdev)) { buf[QEDE_ETHTOOL_INTERRUPT_TEST] = 1; etest->flags |= ETH_TEST_FL_FAILED; diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index 1e3ee49bae24..82d85ccc9ed1 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -668,7 +668,7 @@ netdev_tx_t qede_start_xmit(struct sk_buff *skb, return NETDEV_TX_OK; } -static int qede_txq_has_work(struct qede_tx_queue *txq) +int qede_txq_has_work(struct qede_tx_queue *txq) { u16 hw_bd_cons; @@ -751,7 +751,7 @@ static int qede_tx_int(struct qede_dev *edev, return 0; } -static bool qede_has_rx_work(struct qede_rx_queue *rxq) +bool qede_has_rx_work(struct qede_rx_queue *rxq) { u16 hw_comp_cons, sw_comp_cons; @@ -806,8 +806,8 @@ static inline void qede_reuse_page(struct qede_dev *edev, /* In case of allocation failures reuse buffers * from consumer index to produce buffers for firmware */ -static void qede_recycle_rx_bd_ring(struct qede_rx_queue *rxq, - struct qede_dev *edev, u8 count) +void qede_recycle_rx_bd_ring(struct qede_rx_queue *rxq, + struct qede_dev *edev, u8 count) { struct sw_rx_data *curr_cons;