thunderbolt: Add documentation how Thunderbolt bus can be used
Since there are no such tool yet that handles all the low-level details of connecting devices and upgrading their firmware, add a small document that shows how the Thunderbolt bus can be used directly from command line. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Mika Westerberg
Greg Kroah-Hartman
parent
e6b245ccd5
commit
163f151152
|
|
@ -61,6 +61,7 @@ configure specific aspects of kernel behavior to your liking.
|
|||
java
|
||||
ras
|
||||
pm/index
|
||||
thunderbolt
|
||||
|
||||
.. only:: subproject and html
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,199 @@
|
|||
=============
|
||||
Thunderbolt
|
||||
=============
|
||||
The interface presented here is not meant for end users. Instead there
|
||||
should be a userspace tool that handles all the low-level details, keeps
|
||||
database of the authorized devices and prompts user for new connections.
|
||||
|
||||
More details about the sysfs interface for Thunderbolt devices can be
|
||||
found in ``Documentation/ABI/testing/sysfs-bus-thunderbolt``.
|
||||
|
||||
Those users who just want to connect any device without any sort of
|
||||
manual work, can add following line to
|
||||
``/etc/udev/rules.d/99-local.rules``::
|
||||
|
||||
ACTION=="add", SUBSYSTEM=="thunderbolt", ATTR{authorized}=="0", ATTR{authorized}="1"
|
||||
|
||||
This will authorize all devices automatically when they appear. However,
|
||||
keep in mind that this bypasses the security levels and makes the system
|
||||
vulnerable to DMA attacks.
|
||||
|
||||
Security levels and how to use them
|
||||
-----------------------------------
|
||||
Starting from Intel Falcon Ridge Thunderbolt controller there are 4
|
||||
security levels available. The reason for these is the fact that the
|
||||
connected devices can be DMA masters and thus read contents of the host
|
||||
memory without CPU and OS knowing about it. There are ways to prevent
|
||||
this by setting up an IOMMU but it is not always available for various
|
||||
reasons.
|
||||
|
||||
The security levels are as follows:
|
||||
|
||||
none
|
||||
All devices are automatically connected by the firmware. No user
|
||||
approval is needed. In BIOS settings this is typically called
|
||||
*Legacy mode*.
|
||||
|
||||
user
|
||||
User is asked whether the device is allowed to be connected.
|
||||
Based on the device identification information available through
|
||||
``/sys/bus/thunderbolt/devices``. user then can do the decision.
|
||||
In BIOS settings this is typically called *Unique ID*.
|
||||
|
||||
secure
|
||||
User is asked whether the device is allowed to be connected. In
|
||||
addition to UUID the device (if it supports secure connect) is sent
|
||||
a challenge that should match the expected one based on a random key
|
||||
written to ``key`` sysfs attribute. In BIOS settings this is
|
||||
typically called *One time saved key*.
|
||||
|
||||
dponly
|
||||
The firmware automatically creates tunnels for Display Port and
|
||||
USB. No PCIe tunneling is done. In BIOS settings this is
|
||||
typically called *Display Port Only*.
|
||||
|
||||
The current security level can be read from
|
||||
``/sys/bus/thunderbolt/devices/domainX/security`` where ``domainX`` is
|
||||
the Thunderbolt domain the host controller manages. There is typically
|
||||
one domain per Thunderbolt host controller.
|
||||
|
||||
If the security level reads as ``user`` or ``secure`` the connected
|
||||
device must be authorized by the user before PCIe tunnels are created
|
||||
(e.g the PCIe device appears).
|
||||
|
||||
Each Thunderbolt device plugged in will appear in sysfs under
|
||||
``/sys/bus/thunderbolt/devices``. The device directory carries
|
||||
information that can be used to identify the particular device,
|
||||
including its name and UUID.
|
||||
|
||||
Authorizing devices when security level is ``user`` or ``secure``
|
||||
-----------------------------------------------------------------
|
||||
When a device is plugged in it will appear in sysfs as follows::
|
||||
|
||||
/sys/bus/thunderbolt/devices/0-1/authorized - 0
|
||||
/sys/bus/thunderbolt/devices/0-1/device - 0x8004
|
||||
/sys/bus/thunderbolt/devices/0-1/device_name - Thunderbolt to FireWire Adapter
|
||||
/sys/bus/thunderbolt/devices/0-1/vendor - 0x1
|
||||
/sys/bus/thunderbolt/devices/0-1/vendor_name - Apple, Inc.
|
||||
/sys/bus/thunderbolt/devices/0-1/unique_id - e0376f00-0300-0100-ffff-ffffffffffff
|
||||
|
||||
The ``authorized`` attribute reads 0 which means no PCIe tunnels are
|
||||
created yet. The user can authorize the device by simply::
|
||||
|
||||
# echo 1 > /sys/bus/thunderbolt/devices/0-1/authorized
|
||||
|
||||
This will create the PCIe tunnels and the device is now connected.
|
||||
|
||||
If the device supports secure connect, and the domain security level is
|
||||
set to ``secure``, it has an additional attribute ``key`` which can hold
|
||||
a random 32 byte value used for authorization and challenging the device in
|
||||
future connects::
|
||||
|
||||
/sys/bus/thunderbolt/devices/0-3/authorized - 0
|
||||
/sys/bus/thunderbolt/devices/0-3/device - 0x305
|
||||
/sys/bus/thunderbolt/devices/0-3/device_name - AKiTiO Thunder3 PCIe Box
|
||||
/sys/bus/thunderbolt/devices/0-3/key -
|
||||
/sys/bus/thunderbolt/devices/0-3/vendor - 0x41
|
||||
/sys/bus/thunderbolt/devices/0-3/vendor_name - inXtron
|
||||
/sys/bus/thunderbolt/devices/0-3/unique_id - dc010000-0000-8508-a22d-32ca6421cb16
|
||||
|
||||
Notice the key is empty by default.
|
||||
|
||||
If the user does not want to use secure connect it can just ``echo 1``
|
||||
to the ``authorized`` attribute and the PCIe tunnels will be created in
|
||||
the same way than in ``user`` security level.
|
||||
|
||||
If the user wants to use secure connect, the first time the device is
|
||||
plugged a key needs to be created and send to the device::
|
||||
|
||||
# key=$(openssl rand -hex 32)
|
||||
# echo $key > /sys/bus/thunderbolt/devices/0-3/key
|
||||
# echo 1 > /sys/bus/thunderbolt/devices/0-3/authorized
|
||||
|
||||
Now the device is connected (PCIe tunnels are created) and in addition
|
||||
the key is stored on the device NVM.
|
||||
|
||||
Next time the device is plugged in the user can verify (challenge) the
|
||||
device using the same key::
|
||||
|
||||
# echo $key > /sys/bus/thunderbolt/devices/0-3/key
|
||||
# echo 2 > /sys/bus/thunderbolt/devices/0-3/authorized
|
||||
|
||||
If the challenge the device returns back matches the one we expect based
|
||||
on the key, the device is connected and the PCIe tunnels are created.
|
||||
However, if the challenge failed no tunnels are created and error is
|
||||
returned to the user.
|
||||
|
||||
If the user still wants to connect the device it can either approve
|
||||
the device without a key or write new key and write 1 to the
|
||||
``authorized`` file to get the new key stored on the device NVM.
|
||||
|
||||
Upgrading NVM on Thunderbolt device or host
|
||||
-------------------------------------------
|
||||
Since most of the functionality is handled in a firmware running on a
|
||||
host controller or a device, it is important that the firmware can be
|
||||
upgraded to the latest where possible bugs in it have been fixed.
|
||||
Typically OEMs provide this firmware from their support site.
|
||||
|
||||
There is also a central site which has links where to download firmwares
|
||||
for some machines:
|
||||
|
||||
`Thunderbolt Updates <https://thunderbolttechnology.net/updates>`_
|
||||
|
||||
Before you upgrade firmware on a device or host, please make sure it is
|
||||
the suitable. Failing to do that may render the device (or host) in a
|
||||
state where it cannot be used properly anymore without special tools!
|
||||
|
||||
Host NVM upgrade on Apple Macs is not supported.
|
||||
|
||||
Once the NVM image has been downloaded, you need to plug in a
|
||||
Thunderbolt device so that the host controller appears. It does not
|
||||
matter which device is connected (unless you are upgrading NVM on a
|
||||
device - then you need to connect that particular device).
|
||||
|
||||
Note OEM-specific method to power the controller up ("force power") may
|
||||
be available for your system in which case there is no need to plug in a
|
||||
Thunderbolt device.
|
||||
|
||||
After that we can write the firmware to the non-active parts of the NVM
|
||||
of the host or device. As an example here is how Intel NUC6i7KYK (Skull
|
||||
Canyon) Thunderbolt controller NVM is upgraded::
|
||||
|
||||
# dd if=KYK_TBT_FW_0018.bin of=/sys/bus/thunderbolt/devices/0-0/nvm_non_active0/nvmem
|
||||
|
||||
Once the operation completes we can trigger NVM authentication and
|
||||
upgrade process as follows::
|
||||
|
||||
# echo 1 > /sys/bus/thunderbolt/devices/0-0/nvm_authenticate
|
||||
|
||||
If no errors are returned, the host controller shortly disappears. Once
|
||||
it comes back the driver notices it and initiates a full power cycle.
|
||||
After a while the host controller appears again and this time it should
|
||||
be fully functional.
|
||||
|
||||
We can verify that the new NVM firmware is active by running following
|
||||
commands::
|
||||
|
||||
# cat /sys/bus/thunderbolt/devices/0-0/nvm_authenticate
|
||||
0x0
|
||||
# cat /sys/bus/thunderbolt/devices/0-0/nvm_version
|
||||
18.0
|
||||
|
||||
If ``nvm_authenticate`` contains anything else than 0x0 it is the error
|
||||
code from the last authentication cycle, which means the authentication
|
||||
of the NVM image failed.
|
||||
|
||||
Note names of the NVMem devices ``nvm_activeN`` and ``nvm_non_activeN``
|
||||
depends on the order they are registered in the NVMem subsystem. N in
|
||||
the name is the identifier added by the NVMem subsystem.
|
||||
|
||||
Upgrading NVM when host controller is in safe mode
|
||||
--------------------------------------------------
|
||||
If the existing NVM is not properly authenticated (or is missing) the
|
||||
host controller goes into safe mode which means that only available
|
||||
functionality is flashing new NVM image. When in this mode the reading
|
||||
``nvm_version`` fails with ``ENODATA`` and the device identification
|
||||
information is missing.
|
||||
|
||||
To recover from this mode, one needs to flash a valid NVM image to the
|
||||
host host controller in the same way it is done in the previous chapter.
|
||||
Loading…
Reference in New Issue