ARM: dts: am571x-idk: enable for new cpsw switch dev driver

Add DT nodes for new cpsw switchdev driver for am571x-idk board for now to
enable testing of the new solution.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

arch/arm/boot/dts/am571x-idk.dts

@@ -186,3 +186,30 @@
 	pinctrl-1 = <&mmc2_pins_hs>;
 	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
 };
+
+&mac_sw {
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+};
+
+&cpsw_port1 {
+	phy-handle = <&ethphy0_sw>;
+	phy-mode = "rgmii";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&ethphy1_sw>;
+	phy-mode = "rgmii";
+	ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+	ethphy0_sw: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1_sw: ethernet-phy@1 {
+		reg = <1>;
+	};
+};

arch/arm/boot/dts/am572x-idk.dts

@@ -27,3 +27,8 @@
 	pinctrl-1 = <&mmc2_pins_hs>;
 	pinctrl-2 = <&mmc2_pins_ddr_rev20>;
 };
+
+&mac {
+	status = "okay";
+	dual_emac;
+};

arch/arm/boot/dts/am574x-idk.dts

@@ -35,3 +35,8 @@
 	pinctrl-1 = <&mmc2_pins_default>;
 	pinctrl-2 = <&mmc2_pins_default>;
 };
+
+&mac {
+	status = "okay";
+	dual_emac;
+};

arch/arm/boot/dts/am57xx-idk-common.dtsi

@@ -363,11 +363,6 @@
 	ext-clk-src;
 };
 
-&mac {
-	status = "okay";
-	dual_emac;
-};
-
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";