omap: mux: Add new style pin multiplexing code for omap3
Initially only for 34xx. This code allows us to: - Make the code more generic as the omap internal signal names can stay the same across omap generations for some devices - Map mux registers to GPIO registers that is needed for dynamic muxing of pins during off-idle - Override bootloader mux values via kernel cmdline using omap_mux=some.signa1=0x1234,some.signal2=0x1234 - View and set the mux registers via debugfs if CONFIG_DEBUG_FS is enabled Cc: Mike Rapoport <mike@compulab.co.il> Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Tony Lindgren
parent
92c9f50189
commit
15ac7afe51
|
|
@ -1787,6 +1787,11 @@ and is between 256 and 4096 characters. It is defined in the file
|
|||
waiting for the ACK, so if this is set too high
|
||||
interrupts *may* be lost!
|
||||
|
||||
omap_mux= [OMAP] Override bootloader pin multiplexing.
|
||||
Format: <mux_mode0.mode_name=value>...
|
||||
For example, to override I2C bus2:
|
||||
omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100
|
||||
|
||||
opl3= [HW,OSS]
|
||||
Format: <io>
|
||||
|
||||
|
|
|
|||
|
|
@ -27,18 +27,23 @@
|
|||
#include <linux/init.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <linux/list.h>
|
||||
|
||||
#include <asm/system.h>
|
||||
|
||||
#include <plat/control.h>
|
||||
#include <plat/mux.h>
|
||||
|
||||
#ifdef CONFIG_OMAP_MUX
|
||||
#include "mux.h"
|
||||
|
||||
#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */
|
||||
#define OMAP_MUX_BASE_SZ 0x5ca
|
||||
|
||||
static struct omap_mux_cfg arch_mux_cfg;
|
||||
struct omap_mux_entry {
|
||||
struct omap_mux mux;
|
||||
struct list_head node;
|
||||
};
|
||||
|
||||
static void __iomem *mux_base;
|
||||
|
||||
static inline u16 omap_mux_read(u16 reg)
|
||||
|
|
@ -57,6 +62,10 @@ static inline void omap_mux_write(u16 val, u16 reg)
|
|||
__raw_writew(val, mux_base + reg);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_OMAP_MUX
|
||||
|
||||
static struct omap_mux_cfg arch_mux_cfg;
|
||||
|
||||
/* NOTE: See mux.h for the enumeration */
|
||||
|
||||
#ifdef CONFIG_ARCH_OMAP24XX
|
||||
|
|
@ -667,8 +676,8 @@ int __init omap2_mux_init(void)
|
|||
mux_pbase = OMAP2420_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
|
||||
else if (cpu_is_omap2430())
|
||||
mux_pbase = OMAP243X_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
|
||||
else if (cpu_is_omap34xx())
|
||||
mux_pbase = OMAP343X_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
|
||||
else
|
||||
return -ENODEV;
|
||||
|
||||
mux_base = ioremap(mux_pbase, OMAP_MUX_BASE_SZ);
|
||||
if (!mux_base) {
|
||||
|
|
@ -689,4 +698,431 @@ int __init omap2_mux_init(void)
|
|||
return omap_mux_register(&arch_mux_cfg);
|
||||
}
|
||||
|
||||
#endif /* CONFIG_OMAP_MUX */
|
||||
|
||||
/*----------------------------------------------------------------------------*/
|
||||
|
||||
#ifdef CONFIG_ARCH_OMAP34XX
|
||||
|
||||
static LIST_HEAD(muxmodes);
|
||||
static DEFINE_MUTEX(muxmode_mutex);
|
||||
|
||||
#ifdef CONFIG_OMAP_MUX
|
||||
|
||||
static char *omap_mux_options;
|
||||
|
||||
int __init omap_mux_init_gpio(int gpio, int val)
|
||||
{
|
||||
struct omap_mux_entry *e;
|
||||
int found = 0;
|
||||
|
||||
if (!gpio)
|
||||
return -EINVAL;
|
||||
|
||||
list_for_each_entry(e, &muxmodes, node) {
|
||||
struct omap_mux *m = &e->mux;
|
||||
if (gpio == m->gpio) {
|
||||
u16 old_mode;
|
||||
u16 mux_mode;
|
||||
|
||||
old_mode = omap_mux_read(m->reg_offset);
|
||||
mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);
|
||||
mux_mode |= OMAP_MUX_MODE4;
|
||||
printk(KERN_DEBUG "mux: Setting signal "
|
||||
"%s.gpio%i 0x%04x -> 0x%04x\n",
|
||||
m->muxnames[0], gpio, old_mode, mux_mode);
|
||||
omap_mux_write(mux_mode, m->reg_offset);
|
||||
found++;
|
||||
}
|
||||
}
|
||||
|
||||
if (found == 1)
|
||||
return 0;
|
||||
|
||||
if (found > 1) {
|
||||
printk(KERN_ERR "mux: Multiple gpio paths for gpio%i\n", gpio);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
printk(KERN_ERR "mux: Could not set gpio%i\n", gpio);
|
||||
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
int __init omap_mux_init_signal(char *muxname, int val)
|
||||
{
|
||||
struct omap_mux_entry *e;
|
||||
char *m0_name = NULL, *mode_name = NULL;
|
||||
int found = 0;
|
||||
|
||||
mode_name = strchr(muxname, '.');
|
||||
if (mode_name) {
|
||||
*mode_name = '\0';
|
||||
mode_name++;
|
||||
m0_name = muxname;
|
||||
} else {
|
||||
mode_name = muxname;
|
||||
}
|
||||
|
||||
list_for_each_entry(e, &muxmodes, node) {
|
||||
struct omap_mux *m = &e->mux;
|
||||
char *m0_entry = m->muxnames[0];
|
||||
int i;
|
||||
|
||||
if (m0_name && strcmp(m0_name, m0_entry))
|
||||
continue;
|
||||
|
||||
for (i = 0; i < OMAP_MUX_NR_MODES; i++) {
|
||||
char *mode_cur = m->muxnames[i];
|
||||
|
||||
if (!mode_cur)
|
||||
continue;
|
||||
|
||||
if (!strcmp(mode_name, mode_cur)) {
|
||||
u16 old_mode;
|
||||
u16 mux_mode;
|
||||
|
||||
old_mode = omap_mux_read(m->reg_offset);
|
||||
mux_mode = val | i;
|
||||
printk(KERN_DEBUG "mux: Setting signal "
|
||||
"%s.%s 0x%04x -> 0x%04x\n",
|
||||
m0_entry, muxname, old_mode, mux_mode);
|
||||
omap_mux_write(mux_mode, m->reg_offset);
|
||||
found++;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
if (found == 1)
|
||||
return 0;
|
||||
|
||||
if (found > 1) {
|
||||
printk(KERN_ERR "mux: Multiple signal paths (%i) for %s\n",
|
||||
found, muxname);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
printk(KERN_ERR "mux: Could not set signal %s\n", muxname);
|
||||
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
static void __init omap_mux_free_names(struct omap_mux *m)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < OMAP_MUX_NR_MODES; i++)
|
||||
kfree(m->muxnames[i]);
|
||||
|
||||
#ifdef CONFIG_DEBUG_FS
|
||||
for (i = 0; i < OMAP_MUX_NR_SIDES; i++)
|
||||
kfree(m->balls[i]);
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
/* Free all data except for GPIO pins unless CONFIG_DEBUG_FS is set */
|
||||
static int __init omap_mux_late_init(void)
|
||||
{
|
||||
struct omap_mux_entry *e, *tmp;
|
||||
|
||||
list_for_each_entry_safe(e, tmp, &muxmodes, node) {
|
||||
struct omap_mux *m = &e->mux;
|
||||
u16 mode = omap_mux_read(m->reg_offset);
|
||||
|
||||
if (OMAP_MODE_GPIO(mode))
|
||||
continue;
|
||||
|
||||
#ifndef CONFIG_DEBUG_FS
|
||||
mutex_lock(&muxmode_mutex);
|
||||
list_del(&e->node);
|
||||
mutex_unlock(&muxmode_mutex);
|
||||
omap_mux_free_names(m);
|
||||
kfree(m);
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
late_initcall(omap_mux_late_init);
|
||||
|
||||
static void __init omap_mux_package_fixup(struct omap_mux *p,
|
||||
struct omap_mux *superset)
|
||||
{
|
||||
while (p->reg_offset != OMAP_MUX_TERMINATOR) {
|
||||
struct omap_mux *s = superset;
|
||||
int found = 0;
|
||||
|
||||
while (s->reg_offset != OMAP_MUX_TERMINATOR) {
|
||||
if (s->reg_offset == p->reg_offset) {
|
||||
*s = *p;
|
||||
found++;
|
||||
break;
|
||||
}
|
||||
s++;
|
||||
}
|
||||
if (!found)
|
||||
printk(KERN_ERR "mux: Unknown entry offset 0x%x\n",
|
||||
p->reg_offset);
|
||||
p++;
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef CONFIG_DEBUG_FS
|
||||
|
||||
static void __init omap_mux_package_init_balls(struct omap_ball *b,
|
||||
struct omap_mux *superset)
|
||||
{
|
||||
while (b->reg_offset != OMAP_MUX_TERMINATOR) {
|
||||
struct omap_mux *s = superset;
|
||||
int found = 0;
|
||||
|
||||
while (s->reg_offset != OMAP_MUX_TERMINATOR) {
|
||||
if (s->reg_offset == b->reg_offset) {
|
||||
s->balls[0] = b->balls[0];
|
||||
s->balls[1] = b->balls[1];
|
||||
found++;
|
||||
break;
|
||||
}
|
||||
s++;
|
||||
}
|
||||
if (!found)
|
||||
printk(KERN_ERR "mux: Unknown ball offset 0x%x\n",
|
||||
b->reg_offset);
|
||||
b++;
|
||||
}
|
||||
}
|
||||
|
||||
#else /* CONFIG_DEBUG_FS */
|
||||
|
||||
static inline void omap_mux_package_init_balls(struct omap_ball *b,
|
||||
struct omap_mux *superset)
|
||||
{
|
||||
}
|
||||
|
||||
#endif /* CONFIG_DEBUG_FS */
|
||||
|
||||
static int __init omap_mux_setup(char *options)
|
||||
{
|
||||
if (!options)
|
||||
return 0;
|
||||
|
||||
omap_mux_options = options;
|
||||
|
||||
return 1;
|
||||
}
|
||||
__setup("omap_mux=", omap_mux_setup);
|
||||
|
||||
/*
|
||||
* Note that the omap_mux=some.signal1=0x1234,some.signal2=0x1234
|
||||
* cmdline options only override the bootloader values.
|
||||
* During development, please enable CONFIG_DEBUG_FS, and use the
|
||||
* signal specific entries under debugfs.
|
||||
*/
|
||||
static void __init omap_mux_set_cmdline_signals(void)
|
||||
{
|
||||
char *options, *next_opt, *token;
|
||||
|
||||
if (!omap_mux_options)
|
||||
return;
|
||||
|
||||
options = kmalloc(strlen(omap_mux_options) + 1, GFP_KERNEL);
|
||||
if (!options)
|
||||
return;
|
||||
|
||||
strcpy(options, omap_mux_options);
|
||||
next_opt = options;
|
||||
|
||||
while ((token = strsep(&next_opt, ",")) != NULL) {
|
||||
char *keyval, *name;
|
||||
unsigned long val;
|
||||
|
||||
keyval = token;
|
||||
name = strsep(&keyval, "=");
|
||||
if (name) {
|
||||
int res;
|
||||
|
||||
res = strict_strtoul(keyval, 0x10, &val);
|
||||
if (res < 0)
|
||||
continue;
|
||||
|
||||
omap_mux_init_signal(name, (u16)val);
|
||||
}
|
||||
}
|
||||
|
||||
kfree(options);
|
||||
}
|
||||
|
||||
static void __init omap_mux_set_board_signals(struct omap_board_mux *board_mux)
|
||||
{
|
||||
while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) {
|
||||
omap_mux_write(board_mux->value, board_mux->reg_offset);
|
||||
board_mux++;
|
||||
}
|
||||
}
|
||||
|
||||
static int __init omap_mux_copy_names(struct omap_mux *src,
|
||||
struct omap_mux *dst)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < OMAP_MUX_NR_MODES; i++) {
|
||||
if (src->muxnames[i]) {
|
||||
dst->muxnames[i] =
|
||||
kmalloc(strlen(src->muxnames[i]) + 1,
|
||||
GFP_KERNEL);
|
||||
if (!dst->muxnames[i])
|
||||
goto free;
|
||||
strcpy(dst->muxnames[i], src->muxnames[i]);
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef CONFIG_DEBUG_FS
|
||||
for (i = 0; i < OMAP_MUX_NR_SIDES; i++) {
|
||||
if (src->balls[i]) {
|
||||
dst->balls[i] =
|
||||
kmalloc(strlen(src->balls[i]) + 1,
|
||||
GFP_KERNEL);
|
||||
if (!dst->balls[i])
|
||||
goto free;
|
||||
strcpy(dst->balls[i], src->balls[i]);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
|
||||
free:
|
||||
omap_mux_free_names(dst);
|
||||
return -ENOMEM;
|
||||
|
||||
}
|
||||
|
||||
#endif /* CONFIG_OMAP_MUX */
|
||||
|
||||
static u16 omap_mux_get_by_gpio(int gpio)
|
||||
{
|
||||
struct omap_mux_entry *e;
|
||||
u16 offset = OMAP_MUX_TERMINATOR;
|
||||
|
||||
list_for_each_entry(e, &muxmodes, node) {
|
||||
struct omap_mux *m = &e->mux;
|
||||
if (m->gpio == gpio) {
|
||||
offset = m->reg_offset;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
return offset;
|
||||
}
|
||||
|
||||
/* Needed for dynamic muxing of GPIO pins for off-idle */
|
||||
u16 omap_mux_get_gpio(int gpio)
|
||||
{
|
||||
u16 offset;
|
||||
|
||||
offset = omap_mux_get_by_gpio(gpio);
|
||||
if (offset == OMAP_MUX_TERMINATOR) {
|
||||
printk(KERN_ERR "mux: Could not get gpio%i\n", gpio);
|
||||
return offset;
|
||||
}
|
||||
|
||||
return omap_mux_read(offset);
|
||||
}
|
||||
|
||||
/* Needed for dynamic muxing of GPIO pins for off-idle */
|
||||
void omap_mux_set_gpio(u16 val, int gpio)
|
||||
{
|
||||
u16 offset;
|
||||
|
||||
offset = omap_mux_get_by_gpio(gpio);
|
||||
if (offset == OMAP_MUX_TERMINATOR) {
|
||||
printk(KERN_ERR "mux: Could not set gpio%i\n", gpio);
|
||||
return;
|
||||
}
|
||||
|
||||
omap_mux_write(val, offset);
|
||||
}
|
||||
|
||||
static struct omap_mux * __init omap_mux_list_add(struct omap_mux *src)
|
||||
{
|
||||
struct omap_mux_entry *entry;
|
||||
struct omap_mux *m;
|
||||
|
||||
entry = kzalloc(sizeof(struct omap_mux_entry), GFP_KERNEL);
|
||||
if (!entry)
|
||||
return NULL;
|
||||
|
||||
m = &entry->mux;
|
||||
memcpy(m, src, sizeof(struct omap_mux_entry));
|
||||
|
||||
#ifdef CONFIG_OMAP_MUX
|
||||
if (omap_mux_copy_names(src, m)) {
|
||||
kfree(entry);
|
||||
return NULL;
|
||||
}
|
||||
#endif
|
||||
|
||||
mutex_lock(&muxmode_mutex);
|
||||
list_add_tail(&entry->node, &muxmodes);
|
||||
mutex_unlock(&muxmode_mutex);
|
||||
|
||||
return m;
|
||||
}
|
||||
|
||||
/*
|
||||
* Note if CONFIG_OMAP_MUX is not selected, we will only initialize
|
||||
* the GPIO to mux offset mapping that is needed for dynamic muxing
|
||||
* of GPIO pins for off-idle.
|
||||
*/
|
||||
static void __init omap_mux_init_list(struct omap_mux *superset)
|
||||
{
|
||||
while (superset->reg_offset != OMAP_MUX_TERMINATOR) {
|
||||
struct omap_mux *entry;
|
||||
|
||||
#ifndef CONFIG_OMAP_MUX
|
||||
/* Skip pins that are not muxed as GPIO by bootloader */
|
||||
if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) {
|
||||
superset++;
|
||||
continue;
|
||||
}
|
||||
#endif
|
||||
|
||||
entry = omap_mux_list_add(superset);
|
||||
if (!entry) {
|
||||
printk(KERN_ERR "mux: Could not add entry\n");
|
||||
return;
|
||||
}
|
||||
superset++;
|
||||
}
|
||||
}
|
||||
|
||||
int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
|
||||
struct omap_mux *superset,
|
||||
struct omap_mux *package_subset,
|
||||
struct omap_board_mux *board_mux,
|
||||
struct omap_ball *package_balls)
|
||||
{
|
||||
if (mux_base)
|
||||
return -EBUSY;
|
||||
|
||||
mux_base = ioremap(mux_pbase, mux_size);
|
||||
if (!mux_base) {
|
||||
printk(KERN_ERR "mux: Could not ioremap\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_OMAP_MUX
|
||||
omap_mux_package_fixup(package_subset, superset);
|
||||
omap_mux_package_init_balls(package_balls, superset);
|
||||
omap_mux_set_cmdline_signals();
|
||||
omap_mux_set_board_signals(board_mux);
|
||||
#endif
|
||||
|
||||
omap_mux_init_list(superset);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#endif /* CONFIG_ARCH_OMAP34XX */
|
||||
|
|
|
|||
|
|
@ -0,0 +1,160 @@
|
|||
/*
|
||||
* Copyright (C) 2009 Nokia
|
||||
* Copyright (C) 2009 Texas Instruments
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#define OMAP_MUX_TERMINATOR 0xffff
|
||||
|
||||
/* 34xx mux mode options for each pin. See TRM for options */
|
||||
#define OMAP_MUX_MODE0 0
|
||||
#define OMAP_MUX_MODE1 1
|
||||
#define OMAP_MUX_MODE2 2
|
||||
#define OMAP_MUX_MODE3 3
|
||||
#define OMAP_MUX_MODE4 4
|
||||
#define OMAP_MUX_MODE5 5
|
||||
#define OMAP_MUX_MODE6 6
|
||||
#define OMAP_MUX_MODE7 7
|
||||
|
||||
/* 24xx/34xx mux bit defines */
|
||||
#define OMAP_PULL_ENA (1 << 3)
|
||||
#define OMAP_PULL_UP (1 << 4)
|
||||
#define OMAP_ALTELECTRICALSEL (1 << 5)
|
||||
|
||||
/* 34xx specific mux bit defines */
|
||||
#define OMAP_INPUT_EN (1 << 8)
|
||||
#define OMAP_OFF_EN (1 << 9)
|
||||
#define OMAP_OFFOUT_EN (1 << 10)
|
||||
#define OMAP_OFFOUT_VAL (1 << 11)
|
||||
#define OMAP_OFF_PULL_EN (1 << 12)
|
||||
#define OMAP_OFF_PULL_UP (1 << 13)
|
||||
#define OMAP_WAKEUP_EN (1 << 14)
|
||||
|
||||
/* Active pin states */
|
||||
#define OMAP_PIN_OUTPUT 0
|
||||
#define OMAP_PIN_INPUT OMAP_INPUT_EN
|
||||
#define OMAP_PIN_INPUT_PULLUP (OMAP_PULL_ENA | OMAP_INPUT_EN \
|
||||
| OMAP_PULL_UP)
|
||||
#define OMAP_PIN_INPUT_PULLDOWN (OMAP_PULL_ENA | OMAP_INPUT_EN)
|
||||
|
||||
/* Off mode states */
|
||||
#define OMAP_PIN_OFF_NONE 0
|
||||
#define OMAP_PIN_OFF_OUTPUT_HIGH (OMAP_OFF_EN | OMAP_OFFOUT_EN \
|
||||
| OMAP_OFFOUT_VAL)
|
||||
#define OMAP_PIN_OFF_OUTPUT_LOW (OMAP_OFF_EN | OMAP_OFFOUT_EN)
|
||||
#define OMAP_PIN_OFF_INPUT_PULLUP (OMAP_OFF_EN | OMAP_OFF_PULL_EN \
|
||||
| OMAP_OFF_PULL_UP)
|
||||
#define OMAP_PIN_OFF_INPUT_PULLDOWN (OMAP_OFF_EN | OMAP_OFF_PULL_EN)
|
||||
#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN
|
||||
|
||||
#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
|
||||
|
||||
/* Flags for omap_mux_init */
|
||||
#define OMAP_PACKAGE_MASK 0xffff
|
||||
#define OMAP_PACKAGE_CUS 3 /* 423-pin 0.65 */
|
||||
#define OMAP_PACKAGE_CBB 2 /* 515-pin 0.40 0.50 */
|
||||
#define OMAP_PACKAGE_CBC 1 /* 515-pin 0.50 0.65 */
|
||||
|
||||
|
||||
#define OMAP_MUX_NR_MODES 8 /* Available modes */
|
||||
#define OMAP_MUX_NR_SIDES 2 /* Bottom & top */
|
||||
|
||||
/**
|
||||
* struct omap_mux - data for omap mux register offset and it's value
|
||||
* @reg_offset: mux register offset from the mux base
|
||||
* @gpio: GPIO number
|
||||
* @muxnames: available signal modes for a ball
|
||||
*/
|
||||
struct omap_mux {
|
||||
u16 reg_offset;
|
||||
u16 gpio;
|
||||
#ifdef CONFIG_OMAP_MUX
|
||||
char *muxnames[OMAP_MUX_NR_MODES];
|
||||
#ifdef CONFIG_DEBUG_FS
|
||||
char *balls[OMAP_MUX_NR_SIDES];
|
||||
#endif
|
||||
#endif
|
||||
};
|
||||
|
||||
/**
|
||||
* struct omap_ball - data for balls on omap package
|
||||
* @reg_offset: mux register offset from the mux base
|
||||
* @balls: available balls on the package
|
||||
*/
|
||||
struct omap_ball {
|
||||
u16 reg_offset;
|
||||
char *balls[OMAP_MUX_NR_SIDES];
|
||||
};
|
||||
|
||||
/**
|
||||
* struct omap_board_mux - data for initializing mux registers
|
||||
* @reg_offset: mux register offset from the mux base
|
||||
* @mux_value: desired mux value to set
|
||||
*/
|
||||
struct omap_board_mux {
|
||||
u16 reg_offset;
|
||||
u16 value;
|
||||
};
|
||||
|
||||
#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP34XX)
|
||||
|
||||
/**
|
||||
* omap_mux_init_gpio - initialize a signal based on the GPIO number
|
||||
* @gpio: GPIO number
|
||||
* @val: Options for the mux register value
|
||||
*/
|
||||
int omap_mux_init_gpio(int gpio, int val);
|
||||
|
||||
/**
|
||||
* omap_mux_init_signal - initialize a signal based on the signal name
|
||||
* @muxname: Mux name in mode0_name.signal_name format
|
||||
* @val: Options for the mux register value
|
||||
*/
|
||||
int omap_mux_init_signal(char *muxname, int val);
|
||||
|
||||
#else
|
||||
|
||||
static inline int omap_mux_init_gpio(int gpio, int val)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
static inline int omap_mux_init_signal(char *muxname, int val)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
/**
|
||||
* omap_mux_get_gpio() - get mux register value based on GPIO number
|
||||
* @gpio: GPIO number
|
||||
*
|
||||
*/
|
||||
u16 omap_mux_get_gpio(int gpio);
|
||||
|
||||
/**
|
||||
* omap_mux_set_gpio() - set mux register value based on GPIO number
|
||||
* @val: New mux register value
|
||||
* @gpio: GPIO number
|
||||
*
|
||||
*/
|
||||
void omap_mux_set_gpio(u16 val, int gpio);
|
||||
|
||||
/**
|
||||
* omap3_mux_init() - initialize mux system with board specific set
|
||||
* @board_mux: Board specific mux table
|
||||
* @flags: OMAP package type used for the board
|
||||
*/
|
||||
int omap3_mux_init(struct omap_board_mux *board_mux, int flags);
|
||||
|
||||
/**
|
||||
* omap_mux_init - private mux init function, do not call
|
||||
*/
|
||||
int omap_mux_init(u32 mux_pbase, u32 mux_size,
|
||||
struct omap_mux *superset,
|
||||
struct omap_mux *package_subset,
|
||||
struct omap_board_mux *board_mux,
|
||||
struct omap_ball *package_balls);
|
||||
|
|
@ -54,8 +54,12 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
|
|||
{
|
||||
struct pin_config *reg;
|
||||
|
||||
if (cpu_is_omap44xx())
|
||||
return 0;
|
||||
if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
|
||||
printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
|
||||
index);
|
||||
WARN_ON(1);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (mux_cfg == NULL) {
|
||||
printk(KERN_ERR "Pin mux table not initialized\n");
|
||||
|
|
|
|||
Loading…
Reference in New Issue