media: dt-bindings: media: document allegro-dvt bindings

Add device-tree bindings for the Allegro DVT video IP core found on the
Xilinx ZynqMP EV family.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Documentation/devicetree/bindings/media/allegro.txt

@@ -0,0 +1,43 @@
+Device-tree bindings for the Allegro DVT video IP codecs present in the Xilinx
+ZynqMP SoC. The IP core may either be a H.264/H.265 encoder or H.264/H.265
+decoder ip core.
+
+Each actual codec engines is controlled by a microcontroller (MCU). Host
+software uses a provided mailbox interface to communicate with the MCU. The
+MCU share an interrupt.
+
+Required properties:
+  - compatible: value should be one of the following
+    "allegro,al5e-1.1", "allegro,al5e": encoder IP core
+    "allegro,al5d-1.1", "allegro,al5d": decoder IP core
+  - reg: base and length of the memory mapped register region and base and
+    length of the memory mapped sram
+  - reg-names: must include "regs" and "sram"
+  - interrupts: shared interrupt from the MCUs to the processing system
+  - clocks: must contain an entry for each entry in clock-names
+  - clock-names: must include "core_clk", "mcu_clk", "m_axi_core_aclk",
+    "m_axi_mcu_aclk", "s_axi_lite_aclk"
+
+Example:
+	al5e: video-codec@a0009000 {
+		compatible = "allegro,al5e-1.1", "allegro,al5e";
+		reg = <0 0xa0009000 0 0x1000>,
+		      <0 0xa0000000 0 0x8000>;
+		reg-names = "regs", "sram";
+		interrupts = <0 96 4>;
+		clocks = <&xlnx_vcu 0>, <&xlnx_vcu 1>,
+			 <&clkc 71>, <&clkc 71>, <&clkc 71>;
+		clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk",
+			      "m_axi_mcu_aclk", "s_axi_lite_aclk"
+	};
+	al5d: video-codec@a0029000 {
+		compatible = "allegro,al5d-1.1", "allegro,al5d";
+		reg = <0 0xa0029000 0 0x1000>,
+		      <0 0xa0020000 0 0x8000>;
+		reg-names = "regs", "sram";
+		interrupts = <0 96 4>;
+		clocks = <&xlnx_vcu 2>, <&xlnx_vcu 3>,
+			 <&clkc 71>, <&clkc 71>, <&clkc 71>;
+		clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk",
+			      "m_axi_mcu_aclk", "s_axi_lite_aclk"
+	};