diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig index 6fb4b56e4c14..224ea4e6a46d 100644 --- a/drivers/phy/marvell/Kconfig +++ b/drivers/phy/marvell/Kconfig @@ -21,6 +21,16 @@ config PHY_BERLIN_USB help Enable this to support the USB PHY on Marvell Berlin SoCs. +config PHY_MVEBU_A38X_COMPHY + tristate "Marvell Armada 38x comphy driver" + depends on ARCH_MVEBU || COMPILE_TEST + depends on OF + select GENERIC_PHY + help + This driver allows to control the comphy, an hardware block providing + shared serdes PHYs on Marvell Armada 38x. Its serdes lanes can be + used by various controllers (Ethernet, sata, usb, PCIe...). + config PHY_MVEBU_CP110_COMPHY tristate "Marvell CP110 comphy driver" depends on ARCH_MVEBU || COMPILE_TEST diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile index 3975b144f8ec..59b6c03ef756 100644 --- a/drivers/phy/marvell/Makefile +++ b/drivers/phy/marvell/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o +obj-$(CONFIG_PHY_MVEBU_A38X_COMPHY) += phy-armada38x-comphy.o obj-$(CONFIG_PHY_MVEBU_CP110_COMPHY) += phy-mvebu-cp110-comphy.o obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o diff --git a/drivers/phy/marvell/phy-armada38x-comphy.c b/drivers/phy/marvell/phy-armada38x-comphy.c new file mode 100644 index 000000000000..3e00bc679d4e --- /dev/null +++ b/drivers/phy/marvell/phy-armada38x-comphy.c @@ -0,0 +1,237 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Russell King, Deep Blue Solutions Ltd. + * + * Partly derived from CP110 comphy driver by Antoine Tenart + * + */ +#include +#include +#include +#include +#include +#include + +#define MAX_A38X_COMPHY 6 +#define MAX_A38X_PORTS 3 + +#define COMPHY_CFG1 0x00 +#define COMPHY_CFG1_GEN_TX(x) ((x) << 26) +#define COMPHY_CFG1_GEN_TX_MSK COMPHY_CFG1_GEN_TX(15) +#define COMPHY_CFG1_GEN_RX(x) ((x) << 22) +#define COMPHY_CFG1_GEN_RX_MSK COMPHY_CFG1_GEN_RX(15) +#define GEN_SGMII_1_25GBPS 6 +#define GEN_SGMII_3_125GBPS 8 + +#define COMPHY_STAT1 0x18 +#define COMPHY_STAT1_PLL_RDY_TX BIT(3) +#define COMPHY_STAT1_PLL_RDY_RX BIT(2) + +#define COMPHY_SELECTOR 0xfc + +struct a38x_comphy; + +struct a38x_comphy_lane { + void __iomem *base; + struct a38x_comphy *priv; + unsigned int n; + + int port; +}; + +struct a38x_comphy { + void __iomem *base; + struct device *dev; + struct a38x_comphy_lane lane[MAX_A38X_COMPHY]; +}; + +static const u8 gbe_mux[MAX_A38X_COMPHY][MAX_A38X_PORTS] = { + { 0, 0, 0 }, + { 4, 5, 0 }, + { 0, 4, 0 }, + { 0, 0, 4 }, + { 0, 3, 0 }, + { 0, 0, 3 }, +}; + +static void a38x_comphy_set_reg(struct a38x_comphy_lane *lane, + unsigned int offset, u32 mask, u32 value) +{ + u32 val; + + val = readl_relaxed(lane->base + offset) & ~mask; + writel(val | value, lane->base + offset); +} + +static void a38x_comphy_set_speed(struct a38x_comphy_lane *lane, + unsigned int gen_tx, unsigned int gen_rx) +{ + a38x_comphy_set_reg(lane, COMPHY_CFG1, + COMPHY_CFG1_GEN_TX_MSK | COMPHY_CFG1_GEN_RX_MSK, + COMPHY_CFG1_GEN_TX(gen_tx) | + COMPHY_CFG1_GEN_RX(gen_rx)); +} + +static int a38x_comphy_poll(struct a38x_comphy_lane *lane, + unsigned int offset, u32 mask, u32 value) +{ + u32 val; + int ret; + + ret = readl_relaxed_poll_timeout_atomic(lane->base + offset, val, + (val & mask) == value, + 1000, 150000); + + if (ret) + dev_err(lane->priv->dev, + "comphy%u: timed out waiting for status\n", lane->n); + + return ret; +} + +/* + * We only support changing the speed for comphys configured for GBE. + * Since that is all we do, we only poll for PLL ready status. + */ +static int a38x_comphy_set_mode(struct phy *phy, enum phy_mode mode, int sub) +{ + struct a38x_comphy_lane *lane = phy_get_drvdata(phy); + unsigned int gen; + + if (mode != PHY_MODE_ETHERNET) + return -EINVAL; + + switch (sub) { + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_1000BASEX: + gen = GEN_SGMII_1_25GBPS; + break; + + case PHY_INTERFACE_MODE_2500BASEX: + gen = GEN_SGMII_3_125GBPS; + break; + + default: + return -EINVAL; + } + + a38x_comphy_set_speed(lane, gen, gen); + + return a38x_comphy_poll(lane, COMPHY_STAT1, + COMPHY_STAT1_PLL_RDY_TX | + COMPHY_STAT1_PLL_RDY_RX, + COMPHY_STAT1_PLL_RDY_TX | + COMPHY_STAT1_PLL_RDY_RX); +} + +static const struct phy_ops a38x_comphy_ops = { + .set_mode = a38x_comphy_set_mode, + .owner = THIS_MODULE, +}; + +static struct phy *a38x_comphy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct a38x_comphy_lane *lane; + struct phy *phy; + u32 val; + + if (WARN_ON(args->args[0] >= MAX_A38X_PORTS)) + return ERR_PTR(-EINVAL); + + phy = of_phy_simple_xlate(dev, args); + if (IS_ERR(phy)) + return phy; + + lane = phy_get_drvdata(phy); + if (lane->port >= 0) + return ERR_PTR(-EBUSY); + + lane->port = args->args[0]; + + val = readl_relaxed(lane->priv->base + COMPHY_SELECTOR); + val = (val >> (4 * lane->n)) & 0xf; + + if (!gbe_mux[lane->n][lane->port] || + val != gbe_mux[lane->n][lane->port]) { + dev_warn(lane->priv->dev, + "comphy%u: not configured for GBE\n", lane->n); + phy = ERR_PTR(-EINVAL); + } + + return phy; +} + +static int a38x_comphy_probe(struct platform_device *pdev) +{ + struct phy_provider *provider; + struct device_node *child; + struct a38x_comphy *priv; + struct resource *res; + void __iomem *base; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + priv->dev = &pdev->dev; + priv->base = base; + + for_each_available_child_of_node(pdev->dev.of_node, child) { + struct phy *phy; + int ret; + u32 val; + + ret = of_property_read_u32(child, "reg", &val); + if (ret < 0) { + dev_err(&pdev->dev, "missing 'reg' property (%d)\n", + ret); + continue; + } + + if (val >= MAX_A38X_COMPHY || priv->lane[val].base) { + dev_err(&pdev->dev, "invalid 'reg' property\n"); + continue; + } + + phy = devm_phy_create(&pdev->dev, child, &a38x_comphy_ops); + if (IS_ERR(phy)) + return PTR_ERR(phy); + + priv->lane[val].base = base + 0x28 * val; + priv->lane[val].priv = priv; + priv->lane[val].n = val; + priv->lane[val].port = -1; + phy_set_drvdata(phy, &priv->lane[val]); + } + + dev_set_drvdata(&pdev->dev, priv); + + provider = devm_of_phy_provider_register(&pdev->dev, a38x_comphy_xlate); + + return PTR_ERR_OR_ZERO(provider); +} + +static const struct of_device_id a38x_comphy_of_match_table[] = { + { .compatible = "marvell,armada-380-comphy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, a38x_comphy_of_match_table); + +static struct platform_driver a38x_comphy_driver = { + .probe = a38x_comphy_probe, + .driver = { + .name = "armada-38x-comphy", + .of_match_table = a38x_comphy_of_match_table, + }, +}; +module_platform_driver(a38x_comphy_driver); + +MODULE_AUTHOR("Russell King "); +MODULE_DESCRIPTION("Common PHY driver for Armada 38x SoCs"); +MODULE_LICENSE("GPL v2");