ALSA: hda - Add the controller helper codes to hda-core module

This patch adds the controller helper codes to hda-core library.
The I/O access ops are added to the bus ops.  The CORB/RIRB, the basic
attributes like irq# and iomap address, some locks and the list of
streams are added to the bus object, together with the stream object
and its helpers.

Currently the codes are just copied from the legacy driver, so you can
find duplicated codes in both directories.  Only constants are removed
from the original hda_controller.h.  More integration work will follow
in the later patches.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
Takashi Iwai 2015-04-14 12:15:47 +02:00
parent cad372f1be
commit 1475241272
8 changed files with 1381 additions and 138 deletions

View File

@ -0,0 +1,152 @@
/*
* HD-audio controller (Azalia) registers and helpers
*
* For traditional reasons, we still use azx_ prefix here
*/
#ifndef __SOUND_HDA_REGISTER_H
#define __SOUND_HDA_REGISTER_H
#include <linux/io.h>
#include <sound/hdaudio.h>
#define AZX_REG_GCAP 0x00
#define AZX_GCAP_64OK (1 << 0) /* 64bit address support */
#define AZX_GCAP_NSDO (3 << 1) /* # of serial data out signals */
#define AZX_GCAP_BSS (31 << 3) /* # of bidirectional streams */
#define AZX_GCAP_ISS (15 << 8) /* # of input streams */
#define AZX_GCAP_OSS (15 << 12) /* # of output streams */
#define AZX_REG_VMIN 0x02
#define AZX_REG_VMAJ 0x03
#define AZX_REG_OUTPAY 0x04
#define AZX_REG_INPAY 0x06
#define AZX_REG_GCTL 0x08
#define AZX_GCTL_RESET (1 << 0) /* controller reset */
#define AZX_GCTL_FCNTRL (1 << 1) /* flush control */
#define AZX_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */
#define AZX_REG_WAKEEN 0x0c
#define AZX_REG_STATESTS 0x0e
#define AZX_REG_GSTS 0x10
#define AZX_GSTS_FSTS (1 << 1) /* flush status */
#define AZX_REG_INTCTL 0x20
#define AZX_REG_INTSTS 0x24
#define AZX_REG_WALLCLK 0x30 /* 24Mhz source */
#define AZX_REG_OLD_SSYNC 0x34 /* SSYNC for old ICH */
#define AZX_REG_SSYNC 0x38
#define AZX_REG_CORBLBASE 0x40
#define AZX_REG_CORBUBASE 0x44
#define AZX_REG_CORBWP 0x48
#define AZX_REG_CORBRP 0x4a
#define AZX_CORBRP_RST (1 << 15) /* read pointer reset */
#define AZX_REG_CORBCTL 0x4c
#define AZX_CORBCTL_RUN (1 << 1) /* enable DMA */
#define AZX_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */
#define AZX_REG_CORBSTS 0x4d
#define AZX_CORBSTS_CMEI (1 << 0) /* memory error indication */
#define AZX_REG_CORBSIZE 0x4e
#define AZX_REG_RIRBLBASE 0x50
#define AZX_REG_RIRBUBASE 0x54
#define AZX_REG_RIRBWP 0x58
#define AZX_RIRBWP_RST (1 << 15) /* write pointer reset */
#define AZX_REG_RINTCNT 0x5a
#define AZX_REG_RIRBCTL 0x5c
#define AZX_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */
#define AZX_RBCTL_DMA_EN (1 << 1) /* enable DMA */
#define AZX_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */
#define AZX_REG_RIRBSTS 0x5d
#define AZX_RBSTS_IRQ (1 << 0) /* response irq */
#define AZX_RBSTS_OVERRUN (1 << 2) /* overrun irq */
#define AZX_REG_RIRBSIZE 0x5e
#define AZX_REG_IC 0x60
#define AZX_REG_IR 0x64
#define AZX_REG_IRS 0x68
#define AZX_IRS_VALID (1<<1)
#define AZX_IRS_BUSY (1<<0)
#define AZX_REG_DPLBASE 0x70
#define AZX_REG_DPUBASE 0x74
#define AZX_DPLBASE_ENABLE 0x1 /* Enable position buffer */
/* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */
enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
/* stream register offsets from stream base */
#define AZX_REG_SD_CTL 0x00
#define AZX_REG_SD_STS 0x03
#define AZX_REG_SD_LPIB 0x04
#define AZX_REG_SD_CBL 0x08
#define AZX_REG_SD_LVI 0x0c
#define AZX_REG_SD_FIFOW 0x0e
#define AZX_REG_SD_FIFOSIZE 0x10
#define AZX_REG_SD_FORMAT 0x12
#define AZX_REG_SD_BDLPL 0x18
#define AZX_REG_SD_BDLPU 0x1c
/* PCI space */
#define AZX_PCIREG_TCSEL 0x44
/*
* other constants
*/
/* max number of fragments - we may use more if allocating more pages for BDL */
#define BDL_SIZE 4096
#define AZX_MAX_BDL_ENTRIES (BDL_SIZE / 16)
#define AZX_MAX_FRAG 32
/* max buffer size - no h/w limit, you can increase as you like */
#define AZX_MAX_BUF_SIZE (1024*1024*1024)
/* RIRB int mask: overrun[2], response[0] */
#define RIRB_INT_RESPONSE 0x01
#define RIRB_INT_OVERRUN 0x04
#define RIRB_INT_MASK 0x05
/* STATESTS int mask: S3,SD2,SD1,SD0 */
#define STATESTS_INT_MASK ((1 << HDA_MAX_CODECS) - 1)
/* SD_CTL bits */
#define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */
#define SD_CTL_DMA_START 0x02 /* stream DMA start bit */
#define SD_CTL_STRIPE (3 << 16) /* stripe control */
#define SD_CTL_TRAFFIC_PRIO (1 << 18) /* traffic priority */
#define SD_CTL_DIR (1 << 19) /* bi-directional stream */
#define SD_CTL_STREAM_TAG_MASK (0xf << 20)
#define SD_CTL_STREAM_TAG_SHIFT 20
/* SD_CTL and SD_STS */
#define SD_INT_DESC_ERR 0x10 /* descriptor error interrupt */
#define SD_INT_FIFO_ERR 0x08 /* FIFO error interrupt */
#define SD_INT_COMPLETE 0x04 /* completion interrupt */
#define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\
SD_INT_COMPLETE)
/* SD_STS */
#define SD_STS_FIFO_READY 0x20 /* FIFO ready */
/* INTCTL and INTSTS */
#define AZX_INT_ALL_STREAM 0xff /* all stream interrupts */
#define AZX_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */
#define AZX_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */
/* below are so far hardcoded - should read registers in future */
#define AZX_MAX_CORB_ENTRIES 256
#define AZX_MAX_RIRB_ENTRIES 256
/*
* helpers to read the stream position
*/
static inline unsigned int
snd_hdac_stream_get_pos_lpib(struct hdac_stream *stream)
{
return snd_hdac_stream_readl(stream, SD_LPIB);
}
static inline unsigned int
snd_hdac_stream_get_pos_posbuf(struct hdac_stream *stream)
{
return le32_to_cpu(*stream->posbuf);
}
#endif /* __SOUND_HDA_REGISTER_H */

View File

@ -6,12 +6,17 @@
#define __SOUND_HDAUDIO_H
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/timecounter.h>
#include <sound/core.h>
#include <sound/memalloc.h>
#include <sound/hda_verbs.h>
/* codec node id */
typedef u16 hda_nid_t;
struct hdac_bus;
struct hdac_stream;
struct hdac_device;
struct hdac_driver;
struct hdac_widget_tree;
@ -161,7 +166,7 @@ struct hdac_driver {
#define drv_to_hdac_driver(_drv) container_of(_drv, struct hdac_driver, driver)
/*
* HD-audio bus base driver
* Bus verb operators
*/
struct hdac_bus_ops {
/* send a single command */
@ -171,11 +176,50 @@ struct hdac_bus_ops {
unsigned int *res);
};
#define HDA_UNSOL_QUEUE_SIZE 64
/*
* Lowlevel I/O operators
*/
struct hdac_io_ops {
/* mapped register accesses */
void (*reg_writel)(u32 value, u32 __iomem *addr);
u32 (*reg_readl)(u32 __iomem *addr);
void (*reg_writew)(u16 value, u16 __iomem *addr);
u16 (*reg_readw)(u16 __iomem *addr);
void (*reg_writeb)(u8 value, u8 __iomem *addr);
u8 (*reg_readb)(u8 __iomem *addr);
};
#define HDA_UNSOL_QUEUE_SIZE 64
#define HDA_MAX_CODECS 8 /* limit by controller side */
/* HD Audio class code */
#define PCI_CLASS_MULTIMEDIA_HD_AUDIO 0x0403
/*
* CORB/RIRB
*
* Each CORB entry is 4byte, RIRB is 8byte
*/
struct hdac_rb {
__le32 *buf; /* virtual address of CORB/RIRB buffer */
dma_addr_t addr; /* physical address of CORB/RIRB buffer */
unsigned short rp, wp; /* RIRB read/write pointers */
int cmds[HDA_MAX_CODECS]; /* number of pending requests */
u32 res[HDA_MAX_CODECS]; /* last read value */
};
/*
* HD-audio bus base driver
*/
struct hdac_bus {
struct device *dev;
const struct hdac_bus_ops *ops;
const struct hdac_io_ops *io_ops;
/* h/w resources */
unsigned long addr;
void __iomem *remap_addr;
int irq;
/* codec linked list */
struct list_head codec_list;
@ -189,18 +233,45 @@ struct hdac_bus {
unsigned int unsol_rp, unsol_wp;
struct work_struct unsol_work;
/* bit flags of detected codecs */
unsigned long codec_mask;
/* bit flags of powered codecs */
unsigned long codec_powered;
/* flags */
/* CORB/RIRB */
struct hdac_rb corb;
struct hdac_rb rirb;
unsigned int last_cmd[HDA_MAX_CODECS]; /* last sent command */
/* CORB/RIRB and position buffers */
struct snd_dma_buffer rb;
struct snd_dma_buffer posbuf;
/* hdac_stream linked list */
struct list_head stream_list;
/* operation state */
bool chip_init:1; /* h/w initialized */
/* behavior flags */
bool sync_write:1; /* sync after verb write */
bool use_posbuf:1; /* use position buffer */
bool snoop:1; /* enable snooping */
bool align_bdle_4k:1; /* BDLE align 4K boundary */
bool reverse_assign:1; /* assign devices in reverse order */
bool corbrp_self_clear:1; /* CORBRP clears itself after reset */
int bdl_pos_adj; /* BDL position adjustment */
/* locks */
spinlock_t reg_lock;
struct mutex cmd_mutex;
};
int snd_hdac_bus_init(struct hdac_bus *bus, struct device *dev,
const struct hdac_bus_ops *ops);
const struct hdac_bus_ops *ops,
const struct hdac_io_ops *io_ops);
void snd_hdac_bus_exit(struct hdac_bus *bus);
int snd_hdac_bus_exec_verb(struct hdac_bus *bus, unsigned int addr,
unsigned int cmd, unsigned int *res);
@ -222,6 +293,153 @@ static inline void snd_hdac_codec_link_down(struct hdac_device *codec)
clear_bit(codec->addr, &codec->bus->codec_powered);
}
int snd_hdac_bus_send_cmd(struct hdac_bus *bus, unsigned int val);
int snd_hdac_bus_get_response(struct hdac_bus *bus, unsigned int addr,
unsigned int *res);
bool snd_hdac_bus_init_chip(struct hdac_bus *bus, bool full_reset);
void snd_hdac_bus_stop_chip(struct hdac_bus *bus);
void snd_hdac_bus_init_cmd_io(struct hdac_bus *bus);
void snd_hdac_bus_stop_cmd_io(struct hdac_bus *bus);
void snd_hdac_bus_enter_link_reset(struct hdac_bus *bus);
void snd_hdac_bus_exit_link_reset(struct hdac_bus *bus);
void snd_hdac_bus_update_rirb(struct hdac_bus *bus);
void snd_hdac_bus_handle_stream_irq(struct hdac_bus *bus, unsigned int status,
void (*ack)(struct hdac_bus *,
struct hdac_stream *));
/*
* macros for easy use
*/
#define _snd_hdac_chip_write(type, chip, reg, value) \
((chip)->io_ops->reg_write ## type(value, (chip)->remap_addr + (reg)))
#define _snd_hdac_chip_read(type, chip, reg) \
((chip)->io_ops->reg_read ## type((chip)->remap_addr + (reg)))
/* read/write a register, pass without AZX_REG_ prefix */
#define snd_hdac_chip_writel(chip, reg, value) \
_snd_hdac_chip_write(l, chip, AZX_REG_ ## reg, value)
#define snd_hdac_chip_writew(chip, reg, value) \
_snd_hdac_chip_write(w, chip, AZX_REG_ ## reg, value)
#define snd_hdac_chip_writeb(chip, reg, value) \
_snd_hdac_chip_write(b, chip, AZX_REG_ ## reg, value)
#define snd_hdac_chip_readl(chip, reg) \
_snd_hdac_chip_read(l, chip, AZX_REG_ ## reg)
#define snd_hdac_chip_readw(chip, reg) \
_snd_hdac_chip_read(w, chip, AZX_REG_ ## reg)
#define snd_hdac_chip_readb(chip, reg) \
_snd_hdac_chip_read(b, chip, AZX_REG_ ## reg)
/* update a register, pass without AZX_REG_ prefix */
#define snd_hdac_chip_updatel(chip, reg, mask, val) \
snd_hdac_chip_writel(chip, reg, \
(snd_hdac_chip_readl(chip, reg) & ~(mask)) | (val))
#define snd_hdac_chip_updatew(chip, reg, mask, val) \
snd_hdac_chip_writew(chip, reg, \
(snd_hdac_chip_readw(chip, reg) & ~(mask)) | (val))
#define snd_hdac_chip_updateb(chip, reg, mask, val) \
snd_hdac_chip_writeb(chip, reg, \
(snd_hdac_chip_readb(chip, reg) & ~(mask)) | (val))
/*
* HD-audio stream
*/
struct hdac_stream {
struct hdac_bus *bus;
struct snd_dma_buffer bdl; /* BDL buffer */
__le32 *posbuf; /* position buffer pointer */
int direction; /* playback / capture (SNDRV_PCM_STREAM_*) */
unsigned int bufsize; /* size of the play buffer in bytes */
unsigned int period_bytes; /* size of the period in bytes */
unsigned int frags; /* number for period in the play buffer */
unsigned int fifo_size; /* FIFO size */
void __iomem *sd_addr; /* stream descriptor pointer */
u32 sd_int_sta_mask; /* stream int status mask */
/* pcm support */
struct snd_pcm_substream *substream; /* assigned substream,
* set in PCM open
*/
unsigned int format_val; /* format value to be set in the
* controller and the codec
*/
unsigned char stream_tag; /* assigned stream */
unsigned char index; /* stream index */
int assigned_key; /* last device# key assigned to */
bool opened:1;
bool running:1;
bool no_period_wakeup:1;
/* timestamp */
unsigned long start_wallclk; /* start + minimum wallclk */
unsigned long period_wallclk; /* wallclk for period */
struct timecounter tc;
struct cyclecounter cc;
int delay_negative_threshold;
struct list_head list;
};
void snd_hdac_stream_init(struct hdac_bus *bus, struct hdac_stream *azx_dev,
int idx, int direction, int tag);
struct hdac_stream *snd_hdac_stream_assign(struct hdac_bus *bus,
struct snd_pcm_substream *substream);
void snd_hdac_stream_release(struct hdac_stream *azx_dev);
int snd_hdac_stream_setup(struct hdac_stream *azx_dev);
void snd_hdac_stream_cleanup(struct hdac_stream *azx_dev);
int snd_hdac_stream_setup_periods(struct hdac_stream *azx_dev);
void snd_hdac_stream_start(struct hdac_stream *azx_dev, bool fresh_start);
void snd_hdac_stream_clear(struct hdac_stream *azx_dev);
void snd_hdac_stream_stop(struct hdac_stream *azx_dev);
void snd_hdac_stream_reset(struct hdac_stream *azx_dev);
void snd_hdac_stream_sync_trigger(struct hdac_stream *azx_dev, bool set,
unsigned int streams, unsigned int reg);
void snd_hdac_stream_sync(struct hdac_stream *azx_dev, bool start,
unsigned int streams);
void snd_hdac_stream_timecounter_init(struct hdac_stream *azx_dev,
unsigned int streams);
/*
* macros for easy use
*/
#define _snd_hdac_stream_write(type, dev, reg, value) \
((dev)->bus->io_ops->reg_write ## type(value, (dev)->sd_addr + (reg)))
#define _snd_hdac_stream_read(type, dev, reg) \
((dev)->bus->io_ops->reg_read ## type((dev)->sd_addr + (reg)))
/* read/write a register, pass without AZX_REG_ prefix */
#define snd_hdac_stream_writel(dev, reg, value) \
_snd_hdac_stream_write(l, dev, AZX_REG_ ## reg, value)
#define snd_hdac_stream_writew(dev, reg, value) \
_snd_hdac_stream_write(w, dev, AZX_REG_ ## reg, value)
#define snd_hdac_stream_writeb(dev, reg, value) \
_snd_hdac_stream_write(b, dev, AZX_REG_ ## reg, value)
#define snd_hdac_stream_readl(dev, reg) \
_snd_hdac_stream_read(l, dev, AZX_REG_ ## reg)
#define snd_hdac_stream_readw(dev, reg) \
_snd_hdac_stream_read(w, dev, AZX_REG_ ## reg)
#define snd_hdac_stream_readb(dev, reg) \
_snd_hdac_stream_read(b, dev, AZX_REG_ ## reg)
/* update a register, pass without AZX_REG_ prefix */
#define snd_hdac_stream_updatel(dev, reg, mask, val) \
snd_hdac_stream_writel(dev, reg, \
(snd_hdac_stream_readl(dev, reg) & \
~(mask)) | (val))
#define snd_hdac_stream_updatew(dev, reg, mask, val) \
snd_hdac_stream_writew(dev, reg, \
(snd_hdac_stream_readw(dev, reg) & \
~(mask)) | (val))
#define snd_hdac_stream_updateb(dev, reg, mask, val) \
snd_hdac_stream_writeb(dev, reg, \
(snd_hdac_stream_readb(dev, reg) & \
~(mask)) | (val))
/*
* generic array helpers
*/

View File

@ -1,5 +1,5 @@
snd-hda-core-objs := hda_bus_type.o hdac_bus.o hdac_device.o hdac_sysfs.o \
hdac_regmap.o array.o
hdac_regmap.o hdac_controller.o hdac_stream.o array.o
snd-hda-core-objs += trace.o
CFLAGS_trace.o := -I$(src)

View File

@ -11,21 +11,36 @@
static void process_unsol_events(struct work_struct *work);
static const struct hdac_bus_ops default_ops = {
.command = snd_hdac_bus_send_cmd,
.get_response = snd_hdac_bus_get_response,
};
/**
* snd_hdac_bus_init - initialize a HD-audio bas bus
* @bus: the pointer to bus object
* @ops: bus verb operators
* @io_ops: lowlevel I/O operators
*
* Returns 0 if successful, or a negative error code.
*/
int snd_hdac_bus_init(struct hdac_bus *bus, struct device *dev,
const struct hdac_bus_ops *ops)
const struct hdac_bus_ops *ops,
const struct hdac_io_ops *io_ops)
{
memset(bus, 0, sizeof(*bus));
bus->dev = dev;
bus->ops = ops;
if (ops)
bus->ops = ops;
else
bus->ops = &default_ops;
bus->io_ops = io_ops;
INIT_LIST_HEAD(&bus->stream_list);
INIT_LIST_HEAD(&bus->codec_list);
INIT_WORK(&bus->unsol_work, process_unsol_events);
spin_lock_init(&bus->reg_lock);
mutex_init(&bus->cmd_mutex);
bus->irq = -1;
return 0;
}
EXPORT_SYMBOL_GPL(snd_hdac_bus_init);
@ -36,6 +51,7 @@ EXPORT_SYMBOL_GPL(snd_hdac_bus_init);
*/
void snd_hdac_bus_exit(struct hdac_bus *bus)
{
WARN_ON(!list_empty(&bus->stream_list));
WARN_ON(!list_empty(&bus->codec_list));
cancel_work_sync(&bus->unsol_work);
}

449
sound/hda/hdac_controller.c Normal file
View File

@ -0,0 +1,449 @@
/*
* HD-audio controller helpers
*/
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <sound/core.h>
#include <sound/hdaudio.h>
#include <sound/hda_register.h>
/* clear CORB read pointer properly */
static void azx_clear_corbrp(struct hdac_bus *bus)
{
int timeout;
for (timeout = 1000; timeout > 0; timeout--) {
if (snd_hdac_chip_readw(bus, CORBRP) & AZX_CORBRP_RST)
break;
udelay(1);
}
if (timeout <= 0)
dev_err(bus->dev, "CORB reset timeout#1, CORBRP = %d\n",
snd_hdac_chip_readw(bus, CORBRP));
snd_hdac_chip_writew(bus, CORBRP, 0);
for (timeout = 1000; timeout > 0; timeout--) {
if (snd_hdac_chip_readw(bus, CORBRP) == 0)
break;
udelay(1);
}
if (timeout <= 0)
dev_err(bus->dev, "CORB reset timeout#2, CORBRP = %d\n",
snd_hdac_chip_readw(bus, CORBRP));
}
/**
* snd_hdac_bus_init_cmd_io - set up CORB/RIRB buffers
* @bus: HD-audio core bus
*/
void snd_hdac_bus_init_cmd_io(struct hdac_bus *bus)
{
spin_lock_irq(&bus->reg_lock);
/* CORB set up */
bus->corb.addr = bus->rb.addr;
bus->corb.buf = (__le32 *)bus->rb.area;
snd_hdac_chip_writel(bus, CORBLBASE, (u32)bus->corb.addr);
snd_hdac_chip_writel(bus, CORBUBASE, upper_32_bits(bus->corb.addr));
/* set the corb size to 256 entries (ULI requires explicitly) */
snd_hdac_chip_writeb(bus, CORBSIZE, 0x02);
/* set the corb write pointer to 0 */
snd_hdac_chip_writew(bus, CORBWP, 0);
/* reset the corb hw read pointer */
snd_hdac_chip_writew(bus, CORBRP, AZX_CORBRP_RST);
if (!bus->corbrp_self_clear)
azx_clear_corbrp(bus);
/* enable corb dma */
snd_hdac_chip_writeb(bus, CORBCTL, AZX_CORBCTL_RUN);
/* RIRB set up */
bus->rirb.addr = bus->rb.addr + 2048;
bus->rirb.buf = (__le32 *)(bus->rb.area + 2048);
bus->rirb.wp = bus->rirb.rp = 0;
memset(bus->rirb.cmds, 0, sizeof(bus->rirb.cmds));
snd_hdac_chip_writel(bus, RIRBLBASE, (u32)bus->rirb.addr);
snd_hdac_chip_writel(bus, RIRBUBASE, upper_32_bits(bus->rirb.addr));
/* set the rirb size to 256 entries (ULI requires explicitly) */
snd_hdac_chip_writeb(bus, RIRBSIZE, 0x02);
/* reset the rirb hw write pointer */
snd_hdac_chip_writew(bus, RIRBWP, AZX_RIRBWP_RST);
/* set N=1, get RIRB response interrupt for new entry */
snd_hdac_chip_writew(bus, RINTCNT, 1);
/* enable rirb dma and response irq */
snd_hdac_chip_writeb(bus, RIRBCTL, AZX_RBCTL_DMA_EN | AZX_RBCTL_IRQ_EN);
spin_unlock_irq(&bus->reg_lock);
}
EXPORT_SYMBOL_GPL(snd_hdac_bus_init_cmd_io);
/**
* snd_hdac_bus_stop_cmd_io - clean up CORB/RIRB buffers
* @bus: HD-audio core bus
*/
void snd_hdac_bus_stop_cmd_io(struct hdac_bus *bus)
{
spin_lock_irq(&bus->reg_lock);
/* disable ringbuffer DMAs */
snd_hdac_chip_writeb(bus, RIRBCTL, 0);
snd_hdac_chip_writeb(bus, CORBCTL, 0);
/* disable unsolicited responses */
snd_hdac_chip_updatel(bus, GCTL, AZX_GCTL_UNSOL, 0);
spin_unlock_irq(&bus->reg_lock);
}
EXPORT_SYMBOL_GPL(snd_hdac_bus_stop_cmd_io);
static unsigned int azx_command_addr(u32 cmd)
{
unsigned int addr = cmd >> 28;
if (snd_BUG_ON(addr >= HDA_MAX_CODECS))
addr = 0;
return addr;
}
/**
* snd_hdac_bus_send_cmd - send a command verb via CORB
* @bus: HD-audio core bus
* @val: encoded verb value to send
*
* Returns zero for success or a negative error code.
*/
int snd_hdac_bus_send_cmd(struct hdac_bus *bus, unsigned int val)
{
unsigned int addr = azx_command_addr(val);
unsigned int wp, rp;
spin_lock_irq(&bus->reg_lock);
bus->last_cmd[azx_command_addr(val)] = val;
/* add command to corb */
wp = snd_hdac_chip_readw(bus, CORBWP);
if (wp == 0xffff) {
/* something wrong, controller likely turned to D3 */
spin_unlock_irq(&bus->reg_lock);
return -EIO;
}
wp++;
wp %= AZX_MAX_CORB_ENTRIES;
rp = snd_hdac_chip_readw(bus, CORBRP);
if (wp == rp) {
/* oops, it's full */
spin_unlock_irq(&bus->reg_lock);
return -EAGAIN;
}
bus->rirb.cmds[addr]++;
bus->corb.buf[wp] = cpu_to_le32(val);
snd_hdac_chip_writew(bus, CORBWP, wp);
spin_unlock_irq(&bus->reg_lock);
return 0;
}
EXPORT_SYMBOL_GPL(snd_hdac_bus_send_cmd);
#define AZX_RIRB_EX_UNSOL_EV (1<<4)
/**
* snd_hdac_bus_update_rirb - retrieve RIRB entries
* @bus: HD-audio core bus
*
* Usually called from interrupt handler.
*/
void snd_hdac_bus_update_rirb(struct hdac_bus *bus)
{
unsigned int rp, wp;
unsigned int addr;
u32 res, res_ex;
wp = snd_hdac_chip_readw(bus, RIRBWP);
if (wp == 0xffff) {
/* something wrong, controller likely turned to D3 */
return;
}
if (wp == bus->rirb.wp)
return;
bus->rirb.wp = wp;
while (bus->rirb.rp != wp) {
bus->rirb.rp++;
bus->rirb.rp %= AZX_MAX_RIRB_ENTRIES;
rp = bus->rirb.rp << 1; /* an RIRB entry is 8-bytes */
res_ex = le32_to_cpu(bus->rirb.buf[rp + 1]);
res = le32_to_cpu(bus->rirb.buf[rp]);
addr = res_ex & 0xf;
if (addr >= HDA_MAX_CODECS) {
dev_err(bus->dev,
"spurious response %#x:%#x, rp = %d, wp = %d",
res, res_ex, bus->rirb.rp, wp);
snd_BUG();
} else if (res_ex & AZX_RIRB_EX_UNSOL_EV)
snd_hdac_bus_queue_event(bus, res, res_ex);
else if (bus->rirb.cmds[addr]) {
bus->rirb.res[addr] = res;
bus->rirb.cmds[addr]--;
} else {
dev_err_ratelimited(bus->dev,
"spurious response %#x:%#x, last cmd=%#08x\n",
res, res_ex, bus->last_cmd[addr]);
}
}
}
EXPORT_SYMBOL_GPL(snd_hdac_bus_update_rirb);
/**
* snd_hdac_bus_get_response - receive a response via RIRB
* @bus: HD-audio core bus
* @addr: codec address
* @res: pointer to store the value, NULL when not needed
*
* Returns zero if a value is read, or a negative error code.
*/
int snd_hdac_bus_get_response(struct hdac_bus *bus, unsigned int addr,
unsigned int *res)
{
unsigned long timeout;
unsigned long loopcounter;
timeout = jiffies + msecs_to_jiffies(1000);
for (loopcounter = 0;; loopcounter++) {
spin_lock_irq(&bus->reg_lock);
if (!bus->rirb.cmds[addr]) {
if (res)
*res = bus->rirb.res[addr]; /* the last value */
spin_unlock_irq(&bus->reg_lock);
return 0;
}
spin_unlock_irq(&bus->reg_lock);
if (time_after(jiffies, timeout))
break;
if (loopcounter > 3000)
msleep(2); /* temporary workaround */
else {
udelay(10);
cond_resched();
}
}
return -EIO;
}
EXPORT_SYMBOL_GPL(snd_hdac_bus_get_response);
/*
* Lowlevel interface
*/
/**
* snd_hdac_bus_enter_link_reset - enter link reset
* @bus: HD-audio core bus
*
* Enter to the link reset state.
*/
void snd_hdac_bus_enter_link_reset(struct hdac_bus *bus)
{
unsigned long timeout;
/* reset controller */
snd_hdac_chip_updatel(bus, GCTL, AZX_GCTL_RESET, 0);
timeout = jiffies + msecs_to_jiffies(100);
while ((snd_hdac_chip_readb(bus, GCTL) & AZX_GCTL_RESET) &&
time_before(jiffies, timeout))
usleep_range(500, 1000);
}
EXPORT_SYMBOL_GPL(snd_hdac_bus_enter_link_reset);
/**
* snd_hdac_bus_exit_link_reset - exit link reset
* @bus: HD-audio core bus
*
* Exit from the link reset state.
*/
void snd_hdac_bus_exit_link_reset(struct hdac_bus *bus)
{
unsigned long timeout;
snd_hdac_chip_updateb(bus, GCTL, 0, AZX_GCTL_RESET);
timeout = jiffies + msecs_to_jiffies(100);
while (!snd_hdac_chip_readb(bus, GCTL) && time_before(jiffies, timeout))
usleep_range(500, 1000);
}
EXPORT_SYMBOL_GPL(snd_hdac_bus_exit_link_reset);
/* reset codec link */
static int azx_reset(struct hdac_bus *bus, bool full_reset)
{
if (!full_reset)
goto skip_reset;
/* clear STATESTS */
snd_hdac_chip_writew(bus, STATESTS, STATESTS_INT_MASK);
/* reset controller */
snd_hdac_bus_enter_link_reset(bus);
/* delay for >= 100us for codec PLL to settle per spec
* Rev 0.9 section 5.5.1
*/
usleep_range(500, 1000);
/* Bring controller out of reset */
snd_hdac_bus_exit_link_reset(bus);
/* Brent Chartrand said to wait >= 540us for codecs to initialize */
usleep_range(1000, 1200);
skip_reset:
/* check to see if controller is ready */
if (!snd_hdac_chip_readb(bus, GCTL)) {
dev_dbg(bus->dev, "azx_reset: controller not ready!\n");
return -EBUSY;
}
/* Accept unsolicited responses */
snd_hdac_chip_updatel(bus, GCTL, 0, AZX_GCTL_UNSOL);
/* detect codecs */
if (!bus->codec_mask) {
bus->codec_mask = snd_hdac_chip_readw(bus, STATESTS);
dev_dbg(bus->dev, "codec_mask = 0x%lx\n", bus->codec_mask);
}
return 0;
}
/* enable interrupts */
static void azx_int_enable(struct hdac_bus *bus)
{
/* enable controller CIE and GIE */
snd_hdac_chip_updatel(bus, INTCTL, 0, AZX_INT_CTRL_EN | AZX_INT_GLOBAL_EN);
}
/* disable interrupts */
static void azx_int_disable(struct hdac_bus *bus)
{
struct hdac_stream *azx_dev;
/* disable interrupts in stream descriptor */
list_for_each_entry(azx_dev, &bus->stream_list, list)
snd_hdac_stream_updateb(azx_dev, SD_CTL, SD_INT_MASK, 0);
/* disable SIE for all streams */
snd_hdac_chip_writeb(bus, INTCTL, 0);
/* disable controller CIE and GIE */
snd_hdac_chip_updatel(bus, INTCTL, AZX_INT_CTRL_EN | AZX_INT_GLOBAL_EN, 0);
}
/* clear interrupts */
static void azx_int_clear(struct hdac_bus *bus)
{
struct hdac_stream *azx_dev;
/* clear stream status */
list_for_each_entry(azx_dev, &bus->stream_list, list)
snd_hdac_stream_writeb(azx_dev, SD_STS, SD_INT_MASK);
/* clear STATESTS */
snd_hdac_chip_writew(bus, STATESTS, STATESTS_INT_MASK);
/* clear rirb status */
snd_hdac_chip_writeb(bus, RIRBSTS, RIRB_INT_MASK);
/* clear int status */
snd_hdac_chip_writel(bus, INTSTS, AZX_INT_CTRL_EN | AZX_INT_ALL_STREAM);
}
/**
* snd_hdac_bus_init_chip - reset and start the controller registers
* @bus: HD-audio core bus
* @full_reset: Do full reset
*/
bool snd_hdac_bus_init_chip(struct hdac_bus *bus, bool full_reset)
{
if (bus->chip_init)
return false;
/* reset controller */
azx_reset(bus, full_reset);
/* initialize interrupts */
azx_int_clear(bus);
azx_int_enable(bus);
/* initialize the codec command I/O */
snd_hdac_bus_init_cmd_io(bus);
/* program the position buffer */
if (bus->use_posbuf && bus->posbuf.addr) {
snd_hdac_chip_writel(bus, DPLBASE, (u32)bus->posbuf.addr);
snd_hdac_chip_writel(bus, DPUBASE, upper_32_bits(bus->posbuf.addr));
}
bus->chip_init = true;
return true;
}
EXPORT_SYMBOL_GPL(snd_hdac_bus_init_chip);
/**
* snd_hdac_bus_stop_chip - disable the whole IRQ and I/Os
* @bus: HD-audio core bus
*/
void snd_hdac_bus_stop_chip(struct hdac_bus *bus)
{
if (!bus->chip_init)
return;
/* disable interrupts */
azx_int_disable(bus);
azx_int_clear(bus);
/* disable CORB/RIRB */
snd_hdac_bus_stop_cmd_io(bus);
/* disable position buffer */
if (bus->posbuf.addr) {
snd_hdac_chip_writel(bus, DPLBASE, 0);
snd_hdac_chip_writel(bus, DPUBASE, 0);
}
bus->chip_init = false;
}
EXPORT_SYMBOL_GPL(snd_hdac_bus_stop_chip);
/**
* snd_hdac_bus_handle_stream_irq - interrupt handler for streams
* @bus: HD-audio core bus
* @status: INTSTS register value
* @ask: callback to be called for woken streams
*/
void snd_hdac_bus_handle_stream_irq(struct hdac_bus *bus, unsigned int status,
void (*ack)(struct hdac_bus *,
struct hdac_stream *))
{
struct hdac_stream *azx_dev;
u8 sd_status;
list_for_each_entry(azx_dev, &bus->stream_list, list) {
if (status & azx_dev->sd_int_sta_mask) {
sd_status = snd_hdac_stream_readb(azx_dev, SD_STS);
snd_hdac_stream_writeb(azx_dev, SD_STS, SD_INT_MASK);
if (!azx_dev->substream || !azx_dev->running ||
!(sd_status & SD_INT_COMPLETE))
continue;
if (ack)
ack(bus, azx_dev);
}
}
}
EXPORT_SYMBOL_GPL(snd_hdac_bus_handle_stream_irq);

536
sound/hda/hdac_stream.c Normal file
View File

@ -0,0 +1,536 @@
/*
* HD-audio stream operations
*/
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/hdaudio.h>
#include <sound/hda_register.h>
/**
* snd_hdac_stream_init - initialize each stream (aka device)
* @bus: HD-audio core bus
* @azx_dev: HD-audio core stream object to initialize
* @idx: stream index number
* @direction: stream direction (SNDRV_PCM_STREAM_PLAYBACK or SNDRV_PCM_STREAM_CAPTURE)
* @tag: the tag id to assign
*
* Assign the starting bdl address to each stream (device) and initialize.
*/
void snd_hdac_stream_init(struct hdac_bus *bus, struct hdac_stream *azx_dev,
int idx, int direction, int tag)
{
azx_dev->bus = bus;
if (bus->posbuf.area)
azx_dev->posbuf = (__le32 *)(bus->posbuf.area + idx * 8);
/* offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */
azx_dev->sd_addr = bus->remap_addr + (0x20 * idx + 0x80);
/* int mask: SDI0=0x01, SDI1=0x02, ... SDO3=0x80 */
azx_dev->sd_int_sta_mask = 1 << idx;
azx_dev->index = idx;
azx_dev->direction = direction;
azx_dev->stream_tag = tag;
list_add_tail(&azx_dev->list, &bus->stream_list);
}
EXPORT_SYMBOL_GPL(snd_hdac_stream_init);
/**
* snd_hdac_stream_start - start a stream
* @azx_dev: HD-audio core stream to start
* @fresh_start: false = wallclock timestamp relative to period wallclock
*
* Start a stream, set start_wallclk and set the running flag.
*/
void snd_hdac_stream_start(struct hdac_stream *azx_dev, bool fresh_start)
{
struct hdac_bus *bus = azx_dev->bus;
azx_dev->start_wallclk = snd_hdac_chip_readl(bus, WALLCLK);
if (!fresh_start)
azx_dev->start_wallclk -= azx_dev->period_wallclk;
/* enable SIE */
snd_hdac_chip_updatel(bus, INTCTL, 0, 1 << azx_dev->index);
/* set DMA start and interrupt mask */
snd_hdac_stream_updateb(azx_dev, SD_CTL,
0, SD_CTL_DMA_START | SD_INT_MASK);
azx_dev->running = true;
}
EXPORT_SYMBOL_GPL(snd_hdac_stream_start);
/**
* snd_hdac_stream_clear - stop a stream DMA
* @azx_dev: HD-audio core stream to stop
*/
void snd_hdac_stream_clear(struct hdac_stream *azx_dev)
{
snd_hdac_stream_updateb(azx_dev, SD_CTL,
SD_CTL_DMA_START | SD_INT_MASK, 0);
snd_hdac_stream_writeb(azx_dev, SD_STS, SD_INT_MASK); /* to be sure */
azx_dev->running = false;
}
EXPORT_SYMBOL_GPL(snd_hdac_stream_clear);
/**
* snd_hdac_stream_stop - stop a stream
* @azx_dev: HD-audio core stream to stop
*
* Stop a stream DMA and disable stream interrupt
*/
void snd_hdac_stream_stop(struct hdac_stream *azx_dev)
{
snd_hdac_stream_clear(azx_dev);
/* disable SIE */
snd_hdac_chip_updatel(azx_dev->bus, INTCTL, 1 << azx_dev->index, 0);
}
EXPORT_SYMBOL_GPL(snd_hdac_stream_stop);
/**
* snd_hdac_stream_reset - reset a stream
* @azx_dev: HD-audio core stream to reset
*/
void snd_hdac_stream_reset(struct hdac_stream *azx_dev)
{
unsigned char val;
int timeout;
snd_hdac_stream_clear(azx_dev);
snd_hdac_stream_updateb(azx_dev, SD_CTL, 0, SD_CTL_STREAM_RESET);
udelay(3);
timeout = 300;
do {
val = snd_hdac_stream_readb(azx_dev, SD_CTL) &
SD_CTL_STREAM_RESET;
if (val)
break;
} while (--timeout);
val &= ~SD_CTL_STREAM_RESET;
snd_hdac_stream_writeb(azx_dev, SD_CTL, val);
udelay(3);
timeout = 300;
/* waiting for hardware to report that the stream is out of reset */
do {
val = snd_hdac_stream_readb(azx_dev, SD_CTL) &
SD_CTL_STREAM_RESET;
if (!val)
break;
} while (--timeout);
/* reset first position - may not be synced with hw at this time */
if (azx_dev->posbuf)
*azx_dev->posbuf = 0;
}
EXPORT_SYMBOL_GPL(snd_hdac_stream_reset);
/**
* snd_hdac_stream_setup - set up the SD for streaming
* @azx_dev: HD-audio core stream to set up
*/
int snd_hdac_stream_setup(struct hdac_stream *azx_dev)
{
struct hdac_bus *bus = azx_dev->bus;
struct snd_pcm_runtime *runtime = azx_dev->substream->runtime;
unsigned int val;
/* make sure the run bit is zero for SD */
snd_hdac_stream_clear(azx_dev);
/* program the stream_tag */
val = snd_hdac_stream_readl(azx_dev, SD_CTL);
val = (val & ~SD_CTL_STREAM_TAG_MASK) |
(azx_dev->stream_tag << SD_CTL_STREAM_TAG_SHIFT);
if (!bus->snoop)
val |= SD_CTL_TRAFFIC_PRIO;
snd_hdac_stream_writel(azx_dev, SD_CTL, val);
/* program the length of samples in cyclic buffer */
snd_hdac_stream_writel(azx_dev, SD_CBL, azx_dev->bufsize);
/* program the stream format */
/* this value needs to be the same as the one programmed */
snd_hdac_stream_writew(azx_dev, SD_FORMAT, azx_dev->format_val);
/* program the stream LVI (last valid index) of the BDL */
snd_hdac_stream_writew(azx_dev, SD_LVI, azx_dev->frags - 1);
/* program the BDL address */
/* lower BDL address */
snd_hdac_stream_writel(azx_dev, SD_BDLPL, (u32)azx_dev->bdl.addr);
/* upper BDL address */
snd_hdac_stream_writel(azx_dev, SD_BDLPU,
upper_32_bits(azx_dev->bdl.addr));
/* enable the position buffer */
if (bus->use_posbuf && bus->posbuf.addr) {
if (!(snd_hdac_chip_readl(bus, DPLBASE) & AZX_DPLBASE_ENABLE))
snd_hdac_chip_writel(bus, DPLBASE,
(u32)bus->posbuf.addr | AZX_DPLBASE_ENABLE);
}
/* set the interrupt enable bits in the descriptor control register */
snd_hdac_stream_updatel(azx_dev, SD_CTL, 0, SD_INT_MASK);
if (azx_dev->direction == SNDRV_PCM_STREAM_PLAYBACK)
azx_dev->fifo_size =
snd_hdac_stream_readw(azx_dev, SD_FIFOSIZE) + 1;
else
azx_dev->fifo_size = 0;
/* when LPIB delay correction gives a small negative value,
* we ignore it; currently set the threshold statically to
* 64 frames
*/
if (runtime->period_size > 64)
azx_dev->delay_negative_threshold =
-frames_to_bytes(runtime, 64);
else
azx_dev->delay_negative_threshold = 0;
/* wallclk has 24Mhz clock source */
azx_dev->period_wallclk = (((runtime->period_size * 24000) /
runtime->rate) * 1000);
return 0;
}
EXPORT_SYMBOL_GPL(snd_hdac_stream_setup);
/**
* snd_hdac_stream_cleanup - cleanup a stream
* @azx_dev: HD-audio core stream to clean up
*/
void snd_hdac_stream_cleanup(struct hdac_stream *azx_dev)
{
snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0);
snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0);
snd_hdac_stream_writel(azx_dev, SD_CTL, 0);
azx_dev->bufsize = 0;
azx_dev->period_bytes = 0;
azx_dev->format_val = 0;
}
EXPORT_SYMBOL_GPL(snd_hdac_stream_cleanup);
/**
* snd_hdac_stream_assign - assign a stream for the PCM
* @bus: HD-audio core bus
* @substream: PCM substream to assign
*
* Look for an unused stream for the given PCM substream, assign it
* and return the stream object. If no stream is free, returns NULL.
* The function tries to keep using the same stream object when it's used
* beforehand. Also, when bus->reverse_assign flag is set, the last free
* or matching entry is returned. This is needed for some strange codecs.
*/
struct hdac_stream *snd_hdac_stream_assign(struct hdac_bus *bus,
struct snd_pcm_substream *substream)
{
struct hdac_stream *azx_dev;
struct hdac_stream *res = NULL;
/* make a non-zero unique key for the substream */
int key = (substream->pcm->device << 16) | (substream->number << 2) |
(substream->stream + 1);
list_for_each_entry(azx_dev, &bus->stream_list, list) {
if (azx_dev->direction != substream->stream)
continue;
if (azx_dev->opened)
continue;
if (azx_dev->assigned_key == key) {
res = azx_dev;
break;
}
if (!res || bus->reverse_assign)
res = azx_dev;
}
if (res) {
spin_lock_irq(&bus->reg_lock);
res->opened = 1;
res->running = 0;
res->assigned_key = key;
res->substream = substream;
spin_unlock_irq(&bus->reg_lock);
}
return res;
}
EXPORT_SYMBOL_GPL(snd_hdac_stream_assign);
/**
* snd_hdac_stream_release - release the assigned stream
* @azx_dev: HD-audio core stream to release
*
* Release the stream that has been assigned by snd_hdac_stream_assign().
*/
void snd_hdac_stream_release(struct hdac_stream *azx_dev)
{
struct hdac_bus *bus = azx_dev->bus;
spin_lock_irq(&bus->reg_lock);
azx_dev->opened = 0;
azx_dev->running = 0;
azx_dev->substream = NULL;
spin_unlock_irq(&bus->reg_lock);
}
EXPORT_SYMBOL_GPL(snd_hdac_stream_release);
/*
* set up a BDL entry
*/
static int setup_bdle(struct hdac_bus *bus,
struct snd_dma_buffer *dmab,
struct hdac_stream *azx_dev, __le32 **bdlp,
int ofs, int size, int with_ioc)
{
__le32 *bdl = *bdlp;
while (size > 0) {
dma_addr_t addr;
int chunk;
if (azx_dev->frags >= AZX_MAX_BDL_ENTRIES)
return -EINVAL;
addr = snd_sgbuf_get_addr(dmab, ofs);
/* program the address field of the BDL entry */
bdl[0] = cpu_to_le32((u32)addr);
bdl[1] = cpu_to_le32(upper_32_bits(addr));
/* program the size field of the BDL entry */
chunk = snd_sgbuf_get_chunk_size(dmab, ofs, size);
/* one BDLE cannot cross 4K boundary on CTHDA chips */
if (bus->align_bdle_4k) {
u32 remain = 0x1000 - (ofs & 0xfff);
if (chunk > remain)
chunk = remain;
}
bdl[2] = cpu_to_le32(chunk);
/* program the IOC to enable interrupt
* only when the whole fragment is processed
*/
size -= chunk;
bdl[3] = (size || !with_ioc) ? 0 : cpu_to_le32(0x01);
bdl += 4;
azx_dev->frags++;
ofs += chunk;
}
*bdlp = bdl;
return ofs;
}
/**
* snd_hdac_stream_setup_periods - set up BDL entries
* @azx_dev: HD-audio core stream to set up
*
* Set up the buffer descriptor table of the given stream based on the
* period and buffer sizes of the assigned PCM substream.
*/
int snd_hdac_stream_setup_periods(struct hdac_stream *azx_dev)
{
struct hdac_bus *bus = azx_dev->bus;
struct snd_pcm_substream *substream = azx_dev->substream;
struct snd_pcm_runtime *runtime = substream->runtime;
__le32 *bdl;
int i, ofs, periods, period_bytes;
int pos_adj, pos_align;
/* reset BDL address */
snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0);
snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0);
period_bytes = azx_dev->period_bytes;
periods = azx_dev->bufsize / period_bytes;
/* program the initial BDL entries */
bdl = (__le32 *)azx_dev->bdl.area;
ofs = 0;
azx_dev->frags = 0;
pos_adj = bus->bdl_pos_adj;
if (!azx_dev->no_period_wakeup && pos_adj > 0) {
pos_align = pos_adj;
pos_adj = (pos_adj * runtime->rate + 47999) / 48000;
if (!pos_adj)
pos_adj = pos_align;
else
pos_adj = ((pos_adj + pos_align - 1) / pos_align) *
pos_align;
pos_adj = frames_to_bytes(runtime, pos_adj);
if (pos_adj >= period_bytes) {
dev_warn(bus->dev, "Too big adjustment %d\n",
pos_adj);
pos_adj = 0;
} else {
ofs = setup_bdle(bus, snd_pcm_get_dma_buf(substream),
azx_dev,
&bdl, ofs, pos_adj, true);
if (ofs < 0)
goto error;
}
} else
pos_adj = 0;
for (i = 0; i < periods; i++) {
if (i == periods - 1 && pos_adj)
ofs = setup_bdle(bus, snd_pcm_get_dma_buf(substream),
azx_dev, &bdl, ofs,
period_bytes - pos_adj, 0);
else
ofs = setup_bdle(bus, snd_pcm_get_dma_buf(substream),
azx_dev, &bdl, ofs,
period_bytes,
!azx_dev->no_period_wakeup);
if (ofs < 0)
goto error;
}
return 0;
error:
dev_err(bus->dev, "Too many BDL entries: buffer=%d, period=%d\n",
azx_dev->bufsize, period_bytes);
return -EINVAL;
}
EXPORT_SYMBOL_GPL(snd_hdac_stream_setup_periods);
static cycle_t azx_cc_read(const struct cyclecounter *cc)
{
struct hdac_stream *azx_dev = container_of(cc, struct hdac_stream, cc);
return snd_hdac_chip_readl(azx_dev->bus, WALLCLK);
}
static void azx_timecounter_init(struct hdac_stream *azx_dev,
bool force, cycle_t last)
{
struct timecounter *tc = &azx_dev->tc;
struct cyclecounter *cc = &azx_dev->cc;
u64 nsec;
cc->read = azx_cc_read;
cc->mask = CLOCKSOURCE_MASK(32);
/*
* Converting from 24 MHz to ns means applying a 125/3 factor.
* To avoid any saturation issues in intermediate operations,
* the 125 factor is applied first. The division is applied
* last after reading the timecounter value.
* Applying the 1/3 factor as part of the multiplication
* requires at least 20 bits for a decent precision, however
* overflows occur after about 4 hours or less, not a option.
*/
cc->mult = 125; /* saturation after 195 years */
cc->shift = 0;
nsec = 0; /* audio time is elapsed time since trigger */
timecounter_init(tc, cc, nsec);
if (force) {
/*
* force timecounter to use predefined value,
* used for synchronized starts
*/
tc->cycle_last = last;
}
}
/**
* snd_hdac_stream_timecounter_init - initialize time counter
* @azx_dev: HD-audio core stream (master stream)
* @streams: bit flags of streams to set up
*
* Initializes the time counter of streams marked by the bit flags (each
* bit corresponds to the stream index).
* The trigger timestamp of PCM substream assigned to the given stream is
* updated accordingly, too.
*/
void snd_hdac_stream_timecounter_init(struct hdac_stream *azx_dev,
unsigned int streams)
{
struct hdac_bus *bus = azx_dev->bus;
struct snd_pcm_runtime *runtime = azx_dev->substream->runtime;
struct hdac_stream *s;
bool inited = false;
cycle_t cycle_last = 0;
int i = 0;
list_for_each_entry(s, &bus->stream_list, list) {
if (streams & (1 << i)) {
azx_timecounter_init(s, inited, cycle_last);
if (!inited) {
inited = true;
cycle_last = s->tc.cycle_last;
}
}
i++;
}
snd_pcm_gettime(runtime, &runtime->trigger_tstamp);
runtime->trigger_tstamp_latched = true;
}
EXPORT_SYMBOL_GPL(snd_hdac_stream_timecounter_init);
/**
* snd_hdac_stream_sync_trigger - turn on/off stream sync register
* @azx_dev: HD-audio core stream (master stream)
* @streams: bit flags of streams to sync
*/
void snd_hdac_stream_sync_trigger(struct hdac_stream *azx_dev, bool set,
unsigned int streams, unsigned int reg)
{
struct hdac_bus *bus = azx_dev->bus;
unsigned int val;
if (!reg)
reg = AZX_REG_SSYNC;
val = _snd_hdac_chip_read(l, bus, reg);
if (set)
val |= streams;
else
val &= ~streams;
_snd_hdac_chip_write(l, bus, reg, val);
}
EXPORT_SYMBOL_GPL(snd_hdac_stream_sync_trigger);
/**
* snd_hdac_stream_sync - sync with start/strop trigger operation
* @azx_dev: HD-audio core stream (master stream)
* @start: true = start, false = stop
* @streams: bit flags of streams to sync
*
* For @start = true, wait until all FIFOs get ready.
* For @start = false, wait until all RUN bits are cleared.
*/
void snd_hdac_stream_sync(struct hdac_stream *azx_dev, bool start,
unsigned int streams)
{
struct hdac_bus *bus = azx_dev->bus;
int i, nwait, timeout;
struct hdac_stream *s;
for (timeout = 5000; timeout; timeout--) {
nwait = 0;
i = 0;
list_for_each_entry(s, &bus->stream_list, list) {
if (streams & (1 << i)) {
if (start) {
/* check FIFO gets ready */
if (!(snd_hdac_stream_readb(s, SD_STS) &
SD_STS_FIFO_READY))
nwait++;
} else {
/* check RUN bit is cleared */
if (snd_hdac_stream_readb(s, SD_CTL) &
SD_CTL_DMA_START)
nwait++;
}
}
i++;
}
if (!nwait)
break;
cpu_relax();
}
}
EXPORT_SYMBOL_GPL(snd_hdac_stream_sync);

View File

@ -550,7 +550,7 @@ int snd_hda_bus_new(struct snd_card *card,
if (!bus)
return -ENOMEM;
err = snd_hdac_bus_init(&bus->core, card->dev, &bus_ops);
err = snd_hdac_bus_init(&bus->core, card->dev, &bus_ops, NULL);
if (err < 0) {
kfree(bus);
return err;

View File

@ -21,135 +21,10 @@
#include <sound/pcm.h>
#include <sound/initval.h>
#include "hda_codec.h"
#include <sound/hda_register.h>
/*
* registers
*/
#define AZX_REG_GCAP 0x00
#define AZX_GCAP_64OK (1 << 0) /* 64bit address support */
#define AZX_GCAP_NSDO (3 << 1) /* # of serial data out signals */
#define AZX_GCAP_BSS (31 << 3) /* # of bidirectional streams */
#define AZX_GCAP_ISS (15 << 8) /* # of input streams */
#define AZX_GCAP_OSS (15 << 12) /* # of output streams */
#define AZX_REG_VMIN 0x02
#define AZX_REG_VMAJ 0x03
#define AZX_REG_OUTPAY 0x04
#define AZX_REG_INPAY 0x06
#define AZX_REG_GCTL 0x08
#define AZX_GCTL_RESET (1 << 0) /* controller reset */
#define AZX_GCTL_FCNTRL (1 << 1) /* flush control */
#define AZX_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */
#define AZX_REG_WAKEEN 0x0c
#define AZX_REG_STATESTS 0x0e
#define AZX_REG_GSTS 0x10
#define AZX_GSTS_FSTS (1 << 1) /* flush status */
#define AZX_REG_INTCTL 0x20
#define AZX_REG_INTSTS 0x24
#define AZX_REG_WALLCLK 0x30 /* 24Mhz source */
#define AZX_REG_OLD_SSYNC 0x34 /* SSYNC for old ICH */
#define AZX_REG_SSYNC 0x38
#define AZX_REG_CORBLBASE 0x40
#define AZX_REG_CORBUBASE 0x44
#define AZX_REG_CORBWP 0x48
#define AZX_REG_CORBRP 0x4a
#define AZX_CORBRP_RST (1 << 15) /* read pointer reset */
#define AZX_REG_CORBCTL 0x4c
#define AZX_CORBCTL_RUN (1 << 1) /* enable DMA */
#define AZX_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */
#define AZX_REG_CORBSTS 0x4d
#define AZX_CORBSTS_CMEI (1 << 0) /* memory error indication */
#define AZX_REG_CORBSIZE 0x4e
#define AZX_REG_RIRBLBASE 0x50
#define AZX_REG_RIRBUBASE 0x54
#define AZX_REG_RIRBWP 0x58
#define AZX_RIRBWP_RST (1 << 15) /* write pointer reset */
#define AZX_REG_RINTCNT 0x5a
#define AZX_REG_RIRBCTL 0x5c
#define AZX_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */
#define AZX_RBCTL_DMA_EN (1 << 1) /* enable DMA */
#define AZX_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */
#define AZX_REG_RIRBSTS 0x5d
#define AZX_RBSTS_IRQ (1 << 0) /* response irq */
#define AZX_RBSTS_OVERRUN (1 << 2) /* overrun irq */
#define AZX_REG_RIRBSIZE 0x5e
#define AZX_REG_IC 0x60
#define AZX_REG_IR 0x64
#define AZX_REG_IRS 0x68
#define AZX_IRS_VALID (1<<1)
#define AZX_IRS_BUSY (1<<0)
#define AZX_REG_DPLBASE 0x70
#define AZX_REG_DPUBASE 0x74
#define AZX_DPLBASE_ENABLE 0x1 /* Enable position buffer */
/* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */
enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
/* stream register offsets from stream base */
#define AZX_REG_SD_CTL 0x00
#define AZX_REG_SD_STS 0x03
#define AZX_REG_SD_LPIB 0x04
#define AZX_REG_SD_CBL 0x08
#define AZX_REG_SD_LVI 0x0c
#define AZX_REG_SD_FIFOW 0x0e
#define AZX_REG_SD_FIFOSIZE 0x10
#define AZX_REG_SD_FORMAT 0x12
#define AZX_REG_SD_BDLPL 0x18
#define AZX_REG_SD_BDLPU 0x1c
/* PCI space */
#define AZX_PCIREG_TCSEL 0x44
/*
* other constants
*/
/* max number of fragments - we may use more if allocating more pages for BDL */
#define BDL_SIZE 4096
#define AZX_MAX_BDL_ENTRIES (BDL_SIZE / 16)
#define AZX_MAX_FRAG 32
/* max buffer size - no h/w limit, you can increase as you like */
#define AZX_MAX_BUF_SIZE (1024*1024*1024)
/* RIRB int mask: overrun[2], response[0] */
#define RIRB_INT_RESPONSE 0x01
#define RIRB_INT_OVERRUN 0x04
#define RIRB_INT_MASK 0x05
/* STATESTS int mask: S3,SD2,SD1,SD0 */
#define AZX_MAX_CODECS 8
#define AZX_MAX_CODECS HDA_MAX_CODECS
#define AZX_DEFAULT_CODECS 4
#define STATESTS_INT_MASK ((1 << AZX_MAX_CODECS) - 1)
/* SD_CTL bits */
#define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */
#define SD_CTL_DMA_START 0x02 /* stream DMA start bit */
#define SD_CTL_STRIPE (3 << 16) /* stripe control */
#define SD_CTL_TRAFFIC_PRIO (1 << 18) /* traffic priority */
#define SD_CTL_DIR (1 << 19) /* bi-directional stream */
#define SD_CTL_STREAM_TAG_MASK (0xf << 20)
#define SD_CTL_STREAM_TAG_SHIFT 20
/* SD_CTL and SD_STS */
#define SD_INT_DESC_ERR 0x10 /* descriptor error interrupt */
#define SD_INT_FIFO_ERR 0x08 /* FIFO error interrupt */
#define SD_INT_COMPLETE 0x04 /* completion interrupt */
#define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\
SD_INT_COMPLETE)
/* SD_STS */
#define SD_STS_FIFO_READY 0x20 /* FIFO ready */
/* INTCTL and INTSTS */
#define AZX_INT_ALL_STREAM 0xff /* all stream interrupts */
#define AZX_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */
#define AZX_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */
/* below are so far hardcoded - should read registers in future */
#define AZX_MAX_CORB_ENTRIES 256
#define AZX_MAX_RIRB_ENTRIES 256
/* driver quirks (capabilities) */
/* bits 0-7 are used for indicating driver type */
@ -183,9 +58,6 @@ enum {
AZX_SNOOP_TYPE_NVIDIA,
};
/* HD Audio class code */
#define PCI_CLASS_MULTIMEDIA_HD_AUDIO 0x0403
struct azx_dev {
struct snd_dma_buffer bdl; /* BDL buffer */
u32 *posbuf; /* position buffer pointer */