ath9k: parse the device configuration from an OF node

This allows setting the MAC address and specifying that the firmware
will be requested from userspace (because there might not be a hardware
EEPROM connected to the chip) for ath9k based PCI devices using
the device tree.

There is some out-of-tree code to "convert devicetree to
ath9k_platform_data" (for example in OpenWrt and LEDE) which becomes
obsolete with this patch.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
This commit is contained in:
Martin Blumenstingl 2016-10-16 22:59:07 +02:00 committed by Kalle Valo
parent b40ded2ad7
commit 138b41253d
1 changed files with 42 additions and 0 deletions

View File

@ -20,6 +20,8 @@
#include <linux/slab.h>
#include <linux/ath9k_platform.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_net.h>
#include <linux/relay.h>
#include <net/ieee80211_radiotap.h>
@ -555,6 +557,42 @@ static int ath9k_init_platform(struct ath_softc *sc)
return 0;
}
static int ath9k_of_init(struct ath_softc *sc)
{
struct device_node *np = sc->dev->of_node;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
enum ath_bus_type bus_type = common->bus_ops->ath_bus_type;
const char *mac;
char eeprom_name[100];
int ret;
if (!of_device_is_available(np))
return 0;
ath_dbg(common, CONFIG, "parsing configuration from OF node\n");
if (of_property_read_bool(np, "qca,no-eeprom")) {
/* ath9k-eeprom-<bus>-<id>.bin */
scnprintf(eeprom_name, sizeof(eeprom_name),
"ath9k-eeprom-%s-%s.bin",
ath_bus_type_to_string(bus_type), dev_name(ah->dev));
ret = ath9k_eeprom_request(sc, eeprom_name);
if (ret)
return ret;
}
mac = of_get_mac_address(np);
if (mac)
ether_addr_copy(common->macaddr, mac);
ah->ah_flags &= ~AH_USE_EEPROM;
ah->ah_flags |= AH_NO_EEP_SWAP;
return 0;
}
static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
const struct ath_bus_ops *bus_ops)
{
@ -611,6 +649,10 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
if (ret)
return ret;
ret = ath9k_of_init(sc);
if (ret)
return ret;
if (ath9k_led_active_high != -1)
ah->config.led_active_high = ath9k_led_active_high == 1;