dt-bindings: PCI: Convert PCIe Host/Endpoint in Cadence platform to DT schema
Include Cadence core DT schema and define the Cadence platform DT schema for both Host and Endpoint mode. Note: The Cadence core DT schema could be included for other platforms using Cadence PCIe core. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
This commit is contained in:
Kishon Vijay Abraham I
Lorenzo Pieralisi
parent
69501078fc
commit
11be8af70d
|
|
@ -1,27 +0,0 @@
|
|||
* Cadence PCIe endpoint controller
|
||||
|
||||
Required properties:
|
||||
- compatible: Should contain "cdns,cdns-pcie-ep" to identify the IP used.
|
||||
- reg: Should contain the controller register base address and AXI interface
|
||||
region base address respectively.
|
||||
- reg-names: Must be "reg" and "mem" respectively.
|
||||
- cdns,max-outbound-regions: Set to maximum number of outbound regions
|
||||
|
||||
Optional properties:
|
||||
- max-functions: Maximum number of functions that can be configured (default 1).
|
||||
- phys: From PHY bindings: List of Generic PHY phandles. One per lane if more
|
||||
than one in the list. If only one PHY listed it must manage all lanes.
|
||||
- phy-names: List of names to identify the PHY.
|
||||
|
||||
Example:
|
||||
|
||||
pcie@fc000000 {
|
||||
compatible = "cdns,cdns-pcie-ep";
|
||||
reg = <0x0 0xfc000000 0x0 0x01000000>,
|
||||
<0x0 0x80000000 0x0 0x40000000>;
|
||||
reg-names = "reg", "mem";
|
||||
cdns,max-outbound-regions = <16>;
|
||||
max-functions = /bits/ 8 <8>;
|
||||
phys = <&ep_phy0 &ep_phy1>;
|
||||
phy-names = "pcie-lane0","pcie-lane1";
|
||||
};
|
||||
|
|
@ -0,0 +1,49 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/pci/cdns,cdns-pcie-ep.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Cadence PCIe EP Controller
|
||||
|
||||
maintainers:
|
||||
- Tom Joseph <tjoseph@cadence.com>
|
||||
|
||||
allOf:
|
||||
- $ref: "cdns-pcie.yaml#"
|
||||
- $ref: "pci-ep.yaml#"
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: cdns,cdns-pcie-ep
|
||||
|
||||
reg:
|
||||
maxItems: 2
|
||||
|
||||
reg-names:
|
||||
items:
|
||||
- const: reg
|
||||
- const: mem
|
||||
|
||||
required:
|
||||
- reg
|
||||
- reg-names
|
||||
|
||||
examples:
|
||||
- |
|
||||
bus {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
pcie-ep@fc000000 {
|
||||
compatible = "cdns,cdns-pcie-ep";
|
||||
reg = <0x0 0xfc000000 0x0 0x01000000>,
|
||||
<0x0 0x80000000 0x0 0x40000000>;
|
||||
reg-names = "reg", "mem";
|
||||
cdns,max-outbound-regions = <16>;
|
||||
max-functions = /bits/ 8 <8>;
|
||||
phys = <&pcie_phy0>;
|
||||
phy-names = "pcie-phy";
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
@ -1,66 +0,0 @@
|
|||
* Cadence PCIe host controller
|
||||
|
||||
This PCIe controller inherits the base properties defined in
|
||||
host-generic-pci.txt.
|
||||
|
||||
Required properties:
|
||||
- compatible: Should contain "cdns,cdns-pcie-host" to identify the IP used.
|
||||
- reg: Should contain the controller register base address, PCIe configuration
|
||||
window base address, and AXI interface region base address respectively.
|
||||
- reg-names: Must be "reg", "cfg" and "mem" respectively.
|
||||
- #address-cells: Set to <3>
|
||||
- #size-cells: Set to <2>
|
||||
- device_type: Set to "pci"
|
||||
- ranges: Ranges for the PCI memory and I/O regions
|
||||
- #interrupt-cells: Set to <1>
|
||||
- interrupt-map-mask and interrupt-map: Standard PCI properties to define the
|
||||
mapping of the PCIe interface to interrupt numbers.
|
||||
|
||||
Optional properties:
|
||||
- cdns,max-outbound-regions: Set to maximum number of outbound regions
|
||||
(default 32)
|
||||
- cdns,no-bar-match-nbits: Set into the no BAR match register to configure the
|
||||
number of least significant bits kept during inbound (PCIe -> AXI) address
|
||||
translations (default 32)
|
||||
- vendor-id: The PCI vendor ID (16 bits, default is design dependent)
|
||||
- device-id: The PCI device ID (16 bits, default is design dependent)
|
||||
- phys: From PHY bindings: List of Generic PHY phandles. One per lane if more
|
||||
than one in the list. If only one PHY listed it must manage all lanes.
|
||||
- phy-names: List of names to identify the PHY.
|
||||
|
||||
Example:
|
||||
|
||||
pcie@fb000000 {
|
||||
compatible = "cdns,cdns-pcie-host";
|
||||
device_type = "pci";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
bus-range = <0x0 0xff>;
|
||||
linux,pci-domain = <0>;
|
||||
cdns,max-outbound-regions = <16>;
|
||||
cdns,no-bar-match-nbits = <32>;
|
||||
vendor-id = /bits/ 16 <0x17cd>;
|
||||
device-id = /bits/ 16 <0x0200>;
|
||||
|
||||
reg = <0x0 0xfb000000 0x0 0x01000000>,
|
||||
<0x0 0x41000000 0x0 0x00001000>,
|
||||
<0x0 0x40000000 0x0 0x04000000>;
|
||||
reg-names = "reg", "cfg", "mem";
|
||||
|
||||
ranges = <0x02000000 0x0 0x42000000 0x0 0x42000000 0x0 0x1000000>,
|
||||
<0x01000000 0x0 0x43000000 0x0 0x43000000 0x0 0x0010000>;
|
||||
|
||||
#interrupt-cells = <0x1>;
|
||||
|
||||
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 14 0x1
|
||||
0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 15 0x1
|
||||
0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 16 0x1
|
||||
0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 17 0x1>;
|
||||
|
||||
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
||||
|
||||
msi-parent = <&its_pci>;
|
||||
|
||||
phys = <&pcie_phy0>;
|
||||
phy-names = "pcie-phy";
|
||||
};
|
||||
|
|
@ -0,0 +1,76 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/pci/cdns,cdns-pcie-host.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Cadence PCIe host controller
|
||||
|
||||
maintainers:
|
||||
- Tom Joseph <tjoseph@cadence.com>
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/pci/pci-bus.yaml#
|
||||
- $ref: "cdns-pcie-host.yaml#"
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: cdns,cdns-pcie-host
|
||||
|
||||
reg:
|
||||
maxItems: 3
|
||||
|
||||
reg-names:
|
||||
items:
|
||||
- const: reg
|
||||
- const: cfg
|
||||
- const: mem
|
||||
|
||||
msi-parent: true
|
||||
|
||||
required:
|
||||
- reg
|
||||
- reg-names
|
||||
|
||||
examples:
|
||||
- |
|
||||
bus {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
pcie@fb000000 {
|
||||
compatible = "cdns,cdns-pcie-host";
|
||||
device_type = "pci";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
bus-range = <0x0 0xff>;
|
||||
linux,pci-domain = <0>;
|
||||
cdns,max-outbound-regions = <16>;
|
||||
cdns,no-bar-match-nbits = <32>;
|
||||
vendor-id = <0x17cd>;
|
||||
device-id = <0x0200>;
|
||||
|
||||
reg = <0x0 0xfb000000 0x0 0x01000000>,
|
||||
<0x0 0x41000000 0x0 0x00001000>,
|
||||
<0x0 0x40000000 0x0 0x04000000>;
|
||||
reg-names = "reg", "cfg", "mem";
|
||||
|
||||
ranges = <0x02000000 0x0 0x42000000 0x0 0x42000000 0x0 0x1000000>,
|
||||
<0x01000000 0x0 0x43000000 0x0 0x43000000 0x0 0x0010000>;
|
||||
|
||||
#interrupt-cells = <0x1>;
|
||||
|
||||
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 14 0x1>,
|
||||
<0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 15 0x1>,
|
||||
<0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 16 0x1>,
|
||||
<0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 17 0x1>;
|
||||
|
||||
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
||||
|
||||
msi-parent = <&its_pci>;
|
||||
|
||||
phys = <&pcie_phy0>;
|
||||
phy-names = "pcie-phy";
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
@ -12739,7 +12739,7 @@ PCI DRIVER FOR CADENCE PCIE IP
|
|||
M: Tom Joseph <tjoseph@cadence.com>
|
||||
L: linux-pci@vger.kernel.org
|
||||
S: Maintained
|
||||
F: Documentation/devicetree/bindings/pci/cdns,*.txt
|
||||
F: Documentation/devicetree/bindings/pci/cdns,*
|
||||
F: drivers/pci/controller/pcie-cadence*
|
||||
|
||||
PCI DRIVER FOR FREESCALE LAYERSCAPE
|
||||
|
|
|
|||
Loading…
Reference in New Issue