arm64: dts: rockchip: 'Fix' nanopi4 uSD card detect
For whatever reason, the sdmmc_dectn function isn't working properly as-is, and microSD insertion and removal goes unnoticed. Using the pin as a GPIO interrupt instead is rather noisy without any debouncing, but is good enough to make it useful until someone feels inclined to figure out how the vendor kernel/firmware gets the dedicated function to work with no obvious difference in the pinmux/GRF configuration. Let's also take the opportunity to tweak the node name so that all related pins end up grouped together in the compiled DTB. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
parent
95658e21b1
commit
10f595eedc
|
@ -501,17 +501,21 @@
|
|||
};
|
||||
};
|
||||
|
||||
sd {
|
||||
sdmmc0_pwr_h: sdmmc0-pwr-h {
|
||||
rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_reg_on_h: wifi-reg_on-h {
|
||||
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdmmc {
|
||||
sdmmc0_det_l: sdmmc0-det-l {
|
||||
rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
sdmmc0_pwr_h: sdmmc0-pwr-h {
|
||||
rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
|
@ -563,9 +567,10 @@
|
|||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-mmc-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_bus4 &sdmmc_cd &sdmmc_clk &sdmmc_cmd>;
|
||||
pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc0_det_l>;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v0_sd>;
|
||||
vqmmc-supply = <&vcc_sdio>;
|
||||
|
|
Loading…
Reference in New Issue