[media] cx23885: Add support for Hauppauge WinTV quadHD DVB version
Add support fo the Hauppauge WinTV quadHD DVB version. IR support has not been provided, all 4 tuners, demodulators etc are working. Further documentation can be found on Linux TV wiki. Signed-off-by: Stephen Backway <stev391@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This commit is contained in:
parent
c000e5dad1
commit
10a5210ed4
|
@ -54,3 +54,4 @@
|
|||
53 -> Hauppauge WinTV Starburst [0070:c12a]
|
||||
54 -> ViewCast 260e [1576:0260]
|
||||
55 -> ViewCast 460e [1576:0460]
|
||||
56 -> Hauppauge WinTV-quadHD (DVB) [0070:6a28,0070:6b28]
|
||||
|
|
|
@ -765,6 +765,11 @@ struct cx23885_board cx23885_boards[] = {
|
|||
.amux = CX25840_AUDIO7,
|
||||
} },
|
||||
},
|
||||
[CX23885_BOARD_HAUPPAUGE_QUADHD_DVB] = {
|
||||
.name = "Hauppauge WinTV-QuadHD-DVB",
|
||||
.portb = CX23885_MPEG_DVB,
|
||||
.portc = CX23885_MPEG_DVB,
|
||||
},
|
||||
};
|
||||
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
|
||||
|
||||
|
@ -1060,6 +1065,14 @@ struct cx23885_subid cx23885_subids[] = {
|
|||
.subvendor = 0x1576,
|
||||
.subdevice = 0x0460,
|
||||
.card = CX23885_BOARD_VIEWCAST_460E,
|
||||
}, {
|
||||
.subvendor = 0x0070,
|
||||
.subdevice = 0x6a28,
|
||||
.card = CX23885_BOARD_HAUPPAUGE_QUADHD_DVB, /* Tuner Pair 1 */
|
||||
}, {
|
||||
.subvendor = 0x0070,
|
||||
.subdevice = 0x6b28,
|
||||
.card = CX23885_BOARD_HAUPPAUGE_QUADHD_DVB, /* Tuner Pair 2 */
|
||||
},
|
||||
};
|
||||
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
|
||||
|
@ -1257,6 +1270,14 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
|
|||
case 150329:
|
||||
/* WinTV-HVR5525 (PCIe, DVB-S/S2, DVB-T/T2/C) */
|
||||
break;
|
||||
case 166100:
|
||||
/* WinTV-QuadHD (DVB) Tuner Pair 1 (PCIe, IR, half height,
|
||||
DVB-T/T2/C, DVB-T/T2/C */
|
||||
break;
|
||||
case 166101:
|
||||
/* WinTV-QuadHD (DVB) Tuner Pair 2 (PCIe, IR, half height,
|
||||
DVB-T/T2/C, DVB-T/T2/C */
|
||||
break;
|
||||
default:
|
||||
printk(KERN_WARNING "%s: warning: "
|
||||
"unknown hauppauge model #%d\n",
|
||||
|
@ -1729,20 +1750,22 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
|
|||
cx23885_gpio_set(dev, GPIO_2);
|
||||
break;
|
||||
case CX23885_BOARD_HAUPPAUGE_HVR5525:
|
||||
case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
|
||||
/*
|
||||
* GPIO-00 IR_WIDE
|
||||
* GPIO-02 wake#
|
||||
* GPIO-03 VAUX Pres.
|
||||
* GPIO-07 PROG#
|
||||
* GPIO-08 SAT_RESN
|
||||
* GPIO-09 TER_RESN
|
||||
* GPIO-10 B2_SENSE
|
||||
* GPIO-11 B1_SENSE
|
||||
* GPIO-15 IR_LED_STATUS
|
||||
* GPIO-19 IR_NARROW
|
||||
* GPIO-20 Blauster1
|
||||
* ALTGPIO VAUX_SWITCH
|
||||
* AUX_PLL_CLK : Blaster2
|
||||
* HVR5525 GPIO Details:
|
||||
* GPIO-00 IR_WIDE
|
||||
* GPIO-02 wake#
|
||||
* GPIO-03 VAUX Pres.
|
||||
* GPIO-07 PROG#
|
||||
* GPIO-08 SAT_RESN
|
||||
* GPIO-09 TER_RESN
|
||||
* GPIO-10 B2_SENSE
|
||||
* GPIO-11 B1_SENSE
|
||||
* GPIO-15 IR_LED_STATUS
|
||||
* GPIO-19 IR_NARROW
|
||||
* GPIO-20 Blauster1
|
||||
* ALTGPIO VAUX_SWITCH
|
||||
* AUX_PLL_CLK : Blaster2
|
||||
*/
|
||||
/* Put the parts into reset and back */
|
||||
cx23885_gpio_enable(dev, GPIO_8 | GPIO_9, 1);
|
||||
|
@ -1802,6 +1825,7 @@ int cx23885_ir_init(struct cx23885_dev *dev)
|
|||
case CX23885_BOARD_HAUPPAUGE_HVR1255:
|
||||
case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
|
||||
case CX23885_BOARD_HAUPPAUGE_HVR1210:
|
||||
case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
|
||||
/* FIXME: Implement me */
|
||||
break;
|
||||
case CX23885_BOARD_HAUPPAUGE_HVR1270:
|
||||
|
@ -2000,6 +2024,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
|
|||
case CX23885_BOARD_HAUPPAUGE_STARBURST:
|
||||
case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
|
||||
case CX23885_BOARD_HAUPPAUGE_HVR5525:
|
||||
case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
|
||||
if (dev->i2c_bus[0].i2c_rc == 0)
|
||||
hauppauge_eeprom(dev, eeprom+0xc0);
|
||||
break;
|
||||
|
@ -2145,6 +2170,14 @@ void cx23885_card_setup(struct cx23885_dev *dev)
|
|||
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
|
||||
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
|
||||
break;
|
||||
case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
|
||||
ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
|
||||
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
|
||||
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
|
||||
ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
|
||||
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
|
||||
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
|
||||
break;
|
||||
case CX23885_BOARD_HAUPPAUGE_HVR1250:
|
||||
case CX23885_BOARD_HAUPPAUGE_HVR1500:
|
||||
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
|
||||
|
|
|
@ -2268,9 +2268,107 @@ static int dvb_register(struct cx23885_tsport *port)
|
|||
}
|
||||
break;
|
||||
}
|
||||
case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
|
||||
switch (port->nr) {
|
||||
/* port b - Terrestrial/cable */
|
||||
case 1:
|
||||
/* attach frontend */
|
||||
memset(&si2168_config, 0, sizeof(si2168_config));
|
||||
si2168_config.i2c_adapter = &adapter;
|
||||
si2168_config.fe = &fe0->dvb.frontend;
|
||||
si2168_config.ts_mode = SI2168_TS_SERIAL;
|
||||
memset(&info, 0, sizeof(struct i2c_board_info));
|
||||
strlcpy(info.type, "si2168", I2C_NAME_SIZE);
|
||||
info.addr = 0x64;
|
||||
info.platform_data = &si2168_config;
|
||||
request_module("%s", info.type);
|
||||
client_demod = i2c_new_device(&dev->i2c_bus[0].i2c_adap, &info);
|
||||
if (!client_demod || !client_demod->dev.driver)
|
||||
goto frontend_detach;
|
||||
if (!try_module_get(client_demod->dev.driver->owner)) {
|
||||
i2c_unregister_device(client_demod);
|
||||
goto frontend_detach;
|
||||
}
|
||||
port->i2c_client_demod = client_demod;
|
||||
|
||||
/* attach tuner */
|
||||
memset(&si2157_config, 0, sizeof(si2157_config));
|
||||
si2157_config.fe = fe0->dvb.frontend;
|
||||
si2157_config.if_port = 1;
|
||||
memset(&info, 0, sizeof(struct i2c_board_info));
|
||||
strlcpy(info.type, "si2157", I2C_NAME_SIZE);
|
||||
info.addr = 0x60;
|
||||
info.platform_data = &si2157_config;
|
||||
request_module("%s", info.type);
|
||||
client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info);
|
||||
if (!client_tuner || !client_tuner->dev.driver) {
|
||||
module_put(client_demod->dev.driver->owner);
|
||||
i2c_unregister_device(client_demod);
|
||||
port->i2c_client_demod = NULL;
|
||||
goto frontend_detach;
|
||||
}
|
||||
if (!try_module_get(client_tuner->dev.driver->owner)) {
|
||||
i2c_unregister_device(client_tuner);
|
||||
module_put(client_demod->dev.driver->owner);
|
||||
i2c_unregister_device(client_demod);
|
||||
port->i2c_client_demod = NULL;
|
||||
goto frontend_detach;
|
||||
}
|
||||
port->i2c_client_tuner = client_tuner;
|
||||
break;
|
||||
|
||||
/* port c - terrestrial/cable */
|
||||
case 2:
|
||||
/* attach frontend */
|
||||
memset(&si2168_config, 0, sizeof(si2168_config));
|
||||
si2168_config.i2c_adapter = &adapter;
|
||||
si2168_config.fe = &fe0->dvb.frontend;
|
||||
si2168_config.ts_mode = SI2168_TS_SERIAL;
|
||||
memset(&info, 0, sizeof(struct i2c_board_info));
|
||||
strlcpy(info.type, "si2168", I2C_NAME_SIZE);
|
||||
info.addr = 0x66;
|
||||
info.platform_data = &si2168_config;
|
||||
request_module("%s", info.type);
|
||||
client_demod = i2c_new_device(&dev->i2c_bus[0].i2c_adap, &info);
|
||||
if (!client_demod || !client_demod->dev.driver)
|
||||
goto frontend_detach;
|
||||
if (!try_module_get(client_demod->dev.driver->owner)) {
|
||||
i2c_unregister_device(client_demod);
|
||||
goto frontend_detach;
|
||||
}
|
||||
port->i2c_client_demod = client_demod;
|
||||
|
||||
/* attach tuner */
|
||||
memset(&si2157_config, 0, sizeof(si2157_config));
|
||||
si2157_config.fe = fe0->dvb.frontend;
|
||||
si2157_config.if_port = 1;
|
||||
memset(&info, 0, sizeof(struct i2c_board_info));
|
||||
strlcpy(info.type, "si2157", I2C_NAME_SIZE);
|
||||
info.addr = 0x62;
|
||||
info.platform_data = &si2157_config;
|
||||
request_module("%s", info.type);
|
||||
client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info);
|
||||
if (!client_tuner || !client_tuner->dev.driver) {
|
||||
module_put(client_demod->dev.driver->owner);
|
||||
i2c_unregister_device(client_demod);
|
||||
port->i2c_client_demod = NULL;
|
||||
goto frontend_detach;
|
||||
}
|
||||
if (!try_module_get(client_tuner->dev.driver->owner)) {
|
||||
i2c_unregister_device(client_tuner);
|
||||
module_put(client_demod->dev.driver->owner);
|
||||
i2c_unregister_device(client_demod);
|
||||
port->i2c_client_demod = NULL;
|
||||
goto frontend_detach;
|
||||
}
|
||||
port->i2c_client_tuner = client_tuner;
|
||||
break;
|
||||
}
|
||||
break;
|
||||
|
||||
default:
|
||||
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
|
||||
" isn't supported yet\n",
|
||||
" isn't supported yet\n",
|
||||
dev->name);
|
||||
break;
|
||||
}
|
||||
|
|
|
@ -103,6 +103,7 @@
|
|||
#define CX23885_BOARD_HAUPPAUGE_STARBURST 53
|
||||
#define CX23885_BOARD_VIEWCAST_260E 54
|
||||
#define CX23885_BOARD_VIEWCAST_460E 55
|
||||
#define CX23885_BOARD_HAUPPAUGE_QUADHD_DVB 56
|
||||
|
||||
#define GPIO_0 0x00000001
|
||||
#define GPIO_1 0x00000002
|
||||
|
|
Loading…
Reference in New Issue