UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

ASoC: Additional updates for v3.7 

A couple more updates for 3.7, enhancements to the ux500 and wm2000
 drivers, a new driver for DA9055 and the support for regulator bypass
 mode.  With the exception of the DA9055 this has all had a chance to
 soak in -next (the driver was added on Friday so should be in -next
 today).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaWzdAAoJEOoSHmUN5Tg4UB0P/Avr2Xbg+aH6hrqcSBe7TR1C
 410uSU/4b9vz3BOoZ3ITW8+6C9chwtnOPuRsCtUQbWFy8Rd9rZvmNQL2xLYK/NMt
 tMvRMJXQZtwGCes8Agw5mme9Pcun7ra5vKwQ93mxvTqAQOkLTlCo43PcXSr9j8+Z
 QnnVlajOECm3+PjwXzQ9dwc+QhgAiLR35Xhe7CsCKvj278Ng4FenZpxj+FySaXhL
 rZnSnImNUn/zAuSIlsOasTOciSNwuqrGcdholpWcFJ8qHzAmntAL4VBrQQl3FNNh
 qTsrIzzlByEdK5qFr8/7erRlni4Xy1YmSOhtJ85fGFfo62xUK+cdLCpvPFKwqTPt
 GfQtsqnKTUNBUSoAHDHWCf0zP4/80ZD4XTEpt8+3Oj7QsKzwU2YS3gNf9zQktDtZ
 lMKo/yN0ihPAmIHLtQdXpNDCuZDyurP/r11sJku4GQXnQG302pzGo8Lc5mig7Tzw
 5TDQ58OY4Gz4pJZ7y70nGn8+z3nMMBkoMFXZD1dBxgQnNdvNWrgu1jiGPOHrHXMm
 TkVS3i7VWXAwX5jAGnXeUOuNmlGsvHE/WO7dantGGgf1ef06oqcM/FEeew7heme0
 oLYiklbhaxdWED632FVjzsOpgEwTF+QUqKpzAMFsFieK9yQzFiZ2mkuMT+1QoQaI
 8ksSVvD1cP/yXkVf8h1E
 =nHb7
 -----END PGP SIGNATURE-----

Merge tag 'asoc-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Additional updates for v3.7

A couple more updates for 3.7, enhancements to the ux500 and wm2000
drivers, a new driver for DA9055 and the support for regulator bypass
mode.  With the exception of the DA9055 this has all had a chance to
soak in -next (the driver was added on Friday so should be in -next
today).
This commit is contained in:
Takashi Iwai 2012-10-06 16:33:52 +02:00
parent b7ef37d0e3 9911f7f756
commit 0fd0ba5f9e
40 changed files with 2307 additions and 174 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
Documentation/ABI/testing/sysfs-class-regulator
View File

@ -349,3 +349,24 @@ Description:
This will be one of the same strings reported by
the "state" attribute.
What: /sys/class/regulator/.../bypass
Date: September 2012
KernelVersion: 3.7
Contact: Mark Brown <broonie@opensource.wolfsonmicro.com>
Description:
Some regulator directories will contain a field called
bypass. This indicates if the device is in bypass mode.
This will be one of the following strings:
'enabled'
'disabled'
'unknown'
'enabled' means the regulator is in bypass mode.
'disabled' means that the regulator is regulating.
'unknown' means software cannot determine the state, or
the reported state is invalid.

36
Documentation/devicetree/bindings/sound/cs4271.txt Normal file
View File

@ -0,0 +1,36 @@
Cirrus Logic CS4271 DT bindings
This driver supports both the I2C and the SPI bus.
Required properties:
- compatible: "cirrus,cs4271"
For required properties on SPI, please consult
Documentation/devicetree/bindings/spi/spi-bus.txt
Required properties on I2C:
- reg: the i2c address
Optional properties:
- reset-gpio: a GPIO spec to define which pin is connected to the chip's
!RESET pin
Examples:
codec_i2c: cs4271@10 {
compatible = "cirrus,cs4271";
reg = <0x10>;
reset-gpio = <&gpio 23 0>;
};
codec_spi: cs4271@0 {
compatible = "cirrus,cs4271";
reg = <0x0>;
reset-gpio = <&gpio 23 0>;
spi-max-frequency = <6000000>;
};

39
Documentation/devicetree/bindings/sound/ux500-mop500.txt Normal file
View File

@ -0,0 +1,39 @@
* MOP500 Audio Machine Driver
This node is responsible for linking together all ux500 Audio Driver components.
Required properties:
- compatible : "stericsson,snd-soc-mop500"
Non-standard properties:
- stericsson,cpu-dai : Phandle to the CPU-side DAI
- stericsson,audio-codec : Phandle to the Audio CODEC
- stericsson,card-name : Over-ride default card name
Example:
sound {
compatible = "stericsson,snd-soc-mop500";
stericsson,cpu-dai = <&msp1 &msp3>;
stericsson,audio-codec = <&codec>;
};
msp1: msp@80124000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80124000 0x1000>;
interrupts = <0 62 0x4>;
v-ape-supply = <&db8500_vape_reg>;
};
msp3: msp@80125000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80125000 0x1000>;
interrupts = <0 62 0x4>;
v-ape-supply = <&db8500_vape_reg>;
};
codec: ab8500-codec {
compatible = "stericsson,ab8500-codec";
stericsson,earpeice-cmv = <950>; /* Units in mV. */
};

43
Documentation/devicetree/bindings/sound/ux500-msp.txt Normal file
View File

@ -0,0 +1,43 @@
* ux500 MSP (CPU-side Digital Audio Interface)
Required properties:
- compatible :"stericsson,ux500-msp-i2s"
- reg : Physical base address and length of the device's registers.
Optional properties:
- interrupts : The interrupt output from the device.
- interrupt-parent : The parent interrupt controller.
- <name>-supply : Phandle to the regulator <name> supply
Example:
sound {
compatible = "stericsson,snd-soc-mop500";
stericsson,platform-pcm-dma = <&pcm>;
stericsson,cpu-dai = <&msp1 &msp3>;
stericsson,audio-codec = <&codec>;
};
pcm: ux500-pcm {
compatible = "stericsson,ux500-pcm";
};
msp1: msp@80124000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80124000 0x1000>;
interrupts = <0 62 0x4>;
v-ape-supply = <&db8500_vape_reg>;
};
msp3: msp@80125000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80125000 0x1000>;
interrupts = <0 62 0x4>;
v-ape-supply = <&db8500_vape_reg>;
};
codec: ab8500-codec {
compatible = "stericsson,ab8500-codec";
stericsson,earpeice-cmv = <950>; /* Units in mV. */
};

1
arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
View File

@ -348,4 +348,5 @@ void __init eukrea_mbimx27_baseboard_init(void)
imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);
gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info);
imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
}

1
arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
View File

@ -306,4 +306,5 @@ void __init eukrea_mbimxsd25_baseboard_init(void)
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
}

1
arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
View File

@ -315,4 +315,5 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
}

1
arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c
View File

@ -228,4 +228,5 @@ void __init eukrea_mbimxsd51_baseboard_init(void)
gpio_led_register_device(-1, &eukrea_mbimxsd51_led_info);
imx_add_gpio_keys(&eukrea_mbimxsd51_button_data);
imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
}

79
arch/arm/mach-ux500/board-mop500-msp.c
View File

@ -7,7 +7,6 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/pinctrl/consumer.h>
#include <plat/gpio-nomadik.h>
#include <plat/pincfg.h>
@ -23,53 +22,6 @@
#include "devices-db8500.h"
#include "pins-db8500.h"
/* MSP1/3 Tx/Rx usage protection */
static DEFINE_SPINLOCK(msp_rxtx_lock);
/* Reference Count */
static int msp_rxtx_ref;
/* Pin modes */
struct pinctrl *msp1_p;
struct pinctrl_state *msp1_def;
struct pinctrl_state *msp1_sleep;
int msp13_i2s_init(void)
{
int retval = 0;
unsigned long flags;
spin_lock_irqsave(&msp_rxtx_lock, flags);
if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_def))) {
retval = pinctrl_select_state(msp1_p, msp1_def);
if (retval)
pr_err("could not set MSP1 defstate\n");
}
if (!retval)
msp_rxtx_ref++;
spin_unlock_irqrestore(&msp_rxtx_lock, flags);
return retval;
}
int msp13_i2s_exit(void)
{
int retval = 0;
unsigned long flags;
spin_lock_irqsave(&msp_rxtx_lock, flags);
WARN_ON(!msp_rxtx_ref);
msp_rxtx_ref--;
if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_sleep))) {
retval = pinctrl_select_state(msp1_p, msp1_sleep);
if (retval)
pr_err("could not set MSP1 sleepstate\n");
}
spin_unlock_irqrestore(&msp_rxtx_lock, flags);
return retval;
}
static struct stedma40_chan_cfg msp0_dma_rx = {
.high_priority = true,
.dir = STEDMA40_PERIPH_TO_MEM,
@ -132,8 +84,6 @@ static struct msp_i2s_platform_data msp1_platform_data = {
.id = MSP_I2S_1,
.msp_i2s_dma_rx = NULL,
.msp_i2s_dma_tx = &msp1_dma_tx,
.msp_i2s_init = msp13_i2s_init,
.msp_i2s_exit = msp13_i2s_exit,
};
static struct stedma40_chan_cfg msp2_dma_rx = {
@ -219,49 +169,22 @@ static struct msp_i2s_platform_data msp3_platform_data = {
.id = MSP_I2S_3,
.msp_i2s_dma_rx = &msp1_dma_rx,
.msp_i2s_dma_tx = NULL,
.msp_i2s_init = msp13_i2s_init,
.msp_i2s_exit = msp13_i2s_exit,
};
int mop500_msp_init(struct device *parent)
{
struct platform_device *msp1;
pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__);
platform_device_register(&snd_soc_mop500);
pr_info("Initialize MSP I2S-devices.\n");
db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
&msp0_platform_data);
msp1 = db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
&msp1_platform_data);
db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2,
&msp2_platform_data);
db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
&msp3_platform_data);
/* Get the pinctrl handle for MSP1 */
if (msp1) {
msp1_p = pinctrl_get(&msp1->dev);
if (IS_ERR(msp1_p))
dev_err(&msp1->dev, "could not get MSP1 pinctrl\n");
else {
msp1_def = pinctrl_lookup_state(msp1_p,
PINCTRL_STATE_DEFAULT);
if (IS_ERR(msp1_def)) {
dev_err(&msp1->dev,
"could not get MSP1 defstate\n");
}
msp1_sleep = pinctrl_lookup_state(msp1_p,
PINCTRL_STATE_SLEEP);
if (IS_ERR(msp1_sleep))
dev_err(&msp1->dev,
"could not get MSP1 idlestate\n");
}
}
pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__);
platform_device_register(&ux500_pcm);
return 0;
}

2
arch/arm/mach-ux500/include/mach/msp.h
View File

@ -22,8 +22,6 @@ struct msp_i2s_platform_data {
enum msp_i2s_id id;
struct stedma40_chan_cfg *msp_i2s_dma_rx;
struct stedma40_chan_cfg *msp_i2s_dma_tx;
int (*msp_i2s_init) (void);
int (*msp_i2s_exit) (void);
};
#endif

5
drivers/extcon/extcon-arizona.c
View File

@ -434,6 +434,11 @@ static int __devinit arizona_extcon_probe(struct platform_device *pdev)
regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE,
ARIZONA_JD1_ENA, ARIZONA_JD1_ENA);
ret = regulator_allow_bypass(info->micvdd, true);
if (ret != 0)
dev_warn(arizona->dev, "Failed to set MICVDD to bypass: %d\n",
ret);
pm_runtime_put(&pdev->dev);
return 0;

4
drivers/regulator/arizona-ldo1.c
View File

@ -39,6 +39,8 @@ static struct regulator_ops arizona_ldo1_ops = {
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_bypass = regulator_get_bypass_regmap,
.set_bypass = regulator_set_bypass_regmap,
};
static const struct regulator_desc arizona_ldo1 = {
@ -49,6 +51,8 @@ static const struct regulator_desc arizona_ldo1 = {
.vsel_reg = ARIZONA_LDO1_CONTROL_1,
.vsel_mask = ARIZONA_LDO1_VSEL_MASK,
.bypass_reg = ARIZONA_LDO1_CONTROL_1,
.bypass_mask = ARIZONA_LDO1_BYPASS,
.min_uV = 900000,
.uV_step = 50000,
.n_voltages = 7,

5
drivers/regulator/arizona-micsupp.c
View File

@ -82,6 +82,9 @@ static struct regulator_ops arizona_micsupp_ops = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_bypass = regulator_get_bypass_regmap,
.set_bypass = regulator_set_bypass_regmap,
};
static const struct regulator_desc arizona_micsupp = {
@ -95,6 +98,8 @@ static const struct regulator_desc arizona_micsupp = {
.vsel_mask = ARIZONA_LDO2_VSEL_MASK,
.enable_reg = ARIZONA_MIC_CHARGE_PUMP_1,
.enable_mask = ARIZONA_CPMIC_ENA,
.bypass_reg = ARIZONA_MIC_CHARGE_PUMP_1,
.bypass_mask = ARIZONA_CPMIC_BYPASS,
.owner = THIS_MODULE,
};

126
drivers/regulator/core.c
View File

@ -77,6 +77,7 @@ struct regulator {
struct device *dev;
struct list_head list;
unsigned int always_on:1;
unsigned int bypass:1;
int uA_load;
int min_uV;
int max_uV;
@ -394,6 +395,9 @@ static ssize_t regulator_status_show(struct device *dev,
case REGULATOR_STATUS_STANDBY:
label = "standby";
break;
case REGULATOR_STATUS_BYPASS:
label = "bypass";
break;
case REGULATOR_STATUS_UNDEFINED:
label = "undefined";
break;
@ -585,6 +589,27 @@ static ssize_t regulator_suspend_standby_state_show(struct device *dev,
static DEVICE_ATTR(suspend_standby_state, 0444,
regulator_suspend_standby_state_show, NULL);
static ssize_t regulator_bypass_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
const char *report;
bool bypass;
int ret;
ret = rdev->desc->ops->get_bypass(rdev, &bypass);
if (ret != 0)
report = "unknown";
else if (bypass)
report = "enabled";
else
report = "disabled";
return sprintf(buf, "%s\n", report);
}
static DEVICE_ATTR(bypass, 0444,
regulator_bypass_show, NULL);
/*
* These are the only attributes are present for all regulators.
@ -2673,6 +2698,100 @@ out:
}
EXPORT_SYMBOL_GPL(regulator_set_optimum_mode);
/**
* regulator_set_bypass_regmap - Default set_bypass() using regmap
*
* @rdev: device to operate on.
* @enable: state to set.
*/
int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable)
{
unsigned int val;
if (enable)
val = rdev->desc->bypass_mask;
else
val = 0;
return regmap_update_bits(rdev->regmap, rdev->desc->bypass_reg,
rdev->desc->bypass_mask, val);
}
EXPORT_SYMBOL_GPL(regulator_set_bypass_regmap);
/**
* regulator_get_bypass_regmap - Default get_bypass() using regmap
*
* @rdev: device to operate on.
* @enable: current state.
*/
int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable)
{
unsigned int val;
int ret;
ret = regmap_read(rdev->regmap, rdev->desc->bypass_reg, &val);
if (ret != 0)
return ret;
*enable = val & rdev->desc->bypass_mask;
return 0;
}
EXPORT_SYMBOL_GPL(regulator_get_bypass_regmap);
/**
* regulator_allow_bypass - allow the regulator to go into bypass mode
*
* @regulator: Regulator to configure
* @allow: enable or disable bypass mode
*
* Allow the regulator to go into bypass mode if all other consumers
* for the regulator also enable bypass mode and the machine
* constraints allow this. Bypass mode means that the regulator is
* simply passing the input directly to the output with no regulation.
*/
int regulator_allow_bypass(struct regulator *regulator, bool enable)
{
struct regulator_dev *rdev = regulator->rdev;
int ret = 0;
if (!rdev->desc->ops->set_bypass)
return 0;
if (rdev->constraints &&
!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_BYPASS))
return 0;
mutex_lock(&rdev->mutex);
if (enable && !regulator->bypass) {
rdev->bypass_count++;
if (rdev->bypass_count == rdev->open_count) {
ret = rdev->desc->ops->set_bypass(rdev, enable);
if (ret != 0)
rdev->bypass_count--;
}
} else if (!enable && regulator->bypass) {
rdev->bypass_count--;
if (rdev->bypass_count != rdev->open_count) {
ret = rdev->desc->ops->set_bypass(rdev, enable);
if (ret != 0)
rdev->bypass_count++;
}
}
if (ret == 0)
regulator->bypass = enable;
mutex_unlock(&rdev->mutex);
return ret;
}
EXPORT_SYMBOL_GPL(regulator_allow_bypass);
/**
* regulator_register_notifier - register regulator event notifier
* @regulator: regulator source
@ -3036,6 +3155,11 @@ static int add_regulator_attributes(struct regulator_dev *rdev)
if (status < 0)
return status;
}
if (ops->get_bypass) {
status = device_create_file(dev, &dev_attr_bypass);
if (status < 0)
return status;
}
/* some attributes are type-specific */
if (rdev->desc->type == REGULATOR_CURRENT) {
@ -3124,6 +3248,8 @@ static void rdev_init_debugfs(struct regulator_dev *rdev)
&rdev->use_count);
debugfs_create_u32("open_count", 0444, rdev->debugfs,
&rdev->open_count);
debugfs_create_u32("bypass_count", 0444, rdev->debugfs,
&rdev->bypass_count);
}
/**

8
drivers/regulator/wm831x-ldo.c
View File

@ -237,6 +237,8 @@ static struct regulator_ops wm831x_gp_ldo_ops = {
.set_mode = wm831x_gp_ldo_set_mode,
.get_status = wm831x_gp_ldo_get_status,
.get_optimum_mode = wm831x_gp_ldo_get_optimum_mode,
.get_bypass = regulator_get_bypass_regmap,
.set_bypass = regulator_set_bypass_regmap,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
@ -293,6 +295,8 @@ static __devinit int wm831x_gp_ldo_probe(struct platform_device *pdev)
ldo->desc.vsel_mask = WM831X_LDO1_ON_VSEL_MASK;
ldo->desc.enable_reg = WM831X_LDO_ENABLE;
ldo->desc.enable_mask = 1 << id;
ldo->desc.bypass_reg = ldo->base;
ldo->desc.bypass_mask = WM831X_LDO1_SWI;
config.dev = pdev->dev.parent;
if (pdata)
@ -488,6 +492,8 @@ static struct regulator_ops wm831x_aldo_ops = {
.get_mode = wm831x_aldo_get_mode,
.set_mode = wm831x_aldo_set_mode,
.get_status = wm831x_aldo_get_status,
.set_bypass = regulator_set_bypass_regmap,
.get_bypass = regulator_get_bypass_regmap,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
@ -544,6 +550,8 @@ static __devinit int wm831x_aldo_probe(struct platform_device *pdev)
ldo->desc.vsel_mask = WM831X_LDO7_ON_VSEL_MASK;
ldo->desc.enable_reg = WM831X_LDO_ENABLE;
ldo->desc.enable_mask = 1 << id;
ldo->desc.bypass_reg = ldo->base;
ldo->desc.bypass_mask = WM831X_LDO7_SWI;
config.dev = pdev->dev.parent;
if (pdata)

6
include/linux/mfd/abx500/ab8500-codec.h
View File

@ -23,7 +23,8 @@ enum amic_type {
/* Mic-biases */
enum amic_micbias {
AMIC_MICBIAS_VAMIC1,
AMIC_MICBIAS_VAMIC2
AMIC_MICBIAS_VAMIC2,
AMIC_MICBIAS_UNKNOWN
};
/* Bias-voltage */
@ -31,7 +32,8 @@ enum ear_cm_voltage {
EAR_CMV_0_95V,
EAR_CMV_1_10V,
EAR_CMV_1_27V,
EAR_CMV_1_58V
EAR_CMV_1_58V,
EAR_CMV_UNKNOWN
};
/* Analog microphone settings */

8
include/linux/regulator/consumer.h
View File

@ -177,6 +177,8 @@ int regulator_set_mode(struct regulator *regulator, unsigned int mode);
unsigned int regulator_get_mode(struct regulator *regulator);
int regulator_set_optimum_mode(struct regulator *regulator, int load_uA);
int regulator_allow_bypass(struct regulator *regulator, bool allow);
/* regulator notifier block */
int regulator_register_notifier(struct regulator *regulator,
struct notifier_block *nb);
@ -328,6 +330,12 @@ static inline int regulator_set_optimum_mode(struct regulator *regulator,
return REGULATOR_MODE_NORMAL;
}
static inline int regulator_allow_bypass(struct regulator *regulator,
bool allow)
{
return 0;
}
static inline int regulator_register_notifier(struct regulator *regulator,
struct notifier_block *nb)
{

14
include/linux/regulator/driver.h
View File

@ -32,6 +32,8 @@ enum regulator_status {
REGULATOR_STATUS_NORMAL,
REGULATOR_STATUS_IDLE,
REGULATOR_STATUS_STANDBY,
/* The regulator is enabled but not regulating */
REGULATOR_STATUS_BYPASS,
/* in case that any other status doesn't apply */
REGULATOR_STATUS_UNDEFINED,
};
@ -67,6 +69,9 @@ enum regulator_status {
* @get_optimum_mode: Get the most efficient operating mode for the regulator
* when running with the specified parameters.
*
* @set_bypass: Set the regulator in bypass mode.
* @get_bypass: Get the regulator bypass mode state.
*
* @enable_time: Time taken for the regulator voltage output voltage to
* stabilise after being enabled, in microseconds.
* @set_ramp_delay: Set the ramp delay for the regulator. The driver should
@ -133,6 +138,10 @@ struct regulator_ops {
unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV,
int output_uV, int load_uA);
/* control and report on bypass mode */
int (*set_bypass)(struct regulator_dev *dev, bool enable);
int (*get_bypass)(struct regulator_dev *dev, bool *enable);
/* the operations below are for configuration of regulator state when
* its parent PMIC enters a global STANDBY/HIBERNATE state */
@ -205,6 +214,8 @@ struct regulator_desc {
unsigned int vsel_mask;
unsigned int enable_reg;
unsigned int enable_mask;
unsigned int bypass_reg;
unsigned int bypass_mask;
unsigned int enable_time;
};
@ -253,6 +264,7 @@ struct regulator_dev {
int exclusive;
u32 use_count;
u32 open_count;
u32 bypass_count;
/* lists we belong to */
struct list_head list; /* list of all regulators */
@ -310,6 +322,8 @@ int regulator_disable_regmap(struct regulator_dev *rdev);
int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
unsigned int old_selector,
unsigned int new_selector);
int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable);
int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable);
void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);

2
include/linux/regulator/machine.h
View File

@ -32,6 +32,7 @@ struct regulator;
* board/machine.
* STATUS: Regulator can be enabled and disabled.
* DRMS: Dynamic Regulator Mode Switching is enabled for this regulator.
* BYPASS: Regulator can be put into bypass mode
*/
#define REGULATOR_CHANGE_VOLTAGE 0x1
@ -39,6 +40,7 @@ struct regulator;
#define REGULATOR_CHANGE_MODE 0x4
#define REGULATOR_CHANGE_STATUS 0x8
#define REGULATOR_CHANGE_DRMS 0x10
#define REGULATOR_CHANGE_BYPASS 0x20
/**
* struct regulator_state - regulator state during low power system states

33
include/sound/da9055.h Normal file
View File

@ -0,0 +1,33 @@
/*
* DA9055 ALSA Soc codec driver
*
* Copyright (c) 2012 Dialog Semiconductor
*
* Tested on (Samsung SMDK6410 board + DA9055 EVB) using I2S and I2C
* Written by David Chen <david.chen@diasemi.com> and
* Ashish Chavan <ashish.chavan@kpitcummins.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef __SOUND_DA9055_H__
#define __SOUND_DA9055_H__
enum da9055_micbias_voltage {
DA9055_MICBIAS_1_6V = 0,
DA9055_MICBIAS_1_8V = 1,
DA9055_MICBIAS_2_1V = 2,
DA9055_MICBIAS_2_2V = 3,
};
struct da9055_platform_data {
/* Selects which of the two MicBias pins acts as the bias source */
bool micbias_source;
/* Selects the micbias voltage */
enum da9055_micbias_voltage micbias;
};
#endif

3
include/sound/soc-dapm.h
View File

@ -320,6 +320,9 @@ struct device;
#define SND_SOC_DAPM_EVENT_OFF(e) \
(e & (SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD))
/* regulator widget flags */
#define SND_SOC_DAPM_REGULATOR_BYPASS 0x1 /* bypass when disabled */
struct snd_soc_dapm_widget;
enum snd_soc_dapm_type;
struct snd_soc_dapm_path;

4
sound/soc/codecs/Kconfig
View File

@ -37,6 +37,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_CX20442
select SND_SOC_DA7210 if I2C
select SND_SOC_DA732X if I2C
select SND_SOC_DA9055 if I2C
select SND_SOC_DFBMCS320
select SND_SOC_ISABELLE if I2C
select SND_SOC_JZ4740_CODEC
@ -239,6 +240,9 @@ config SND_SOC_DA7210
config SND_SOC_DA732X
tristate
config SND_SOC_DA9055
tristate
config SND_SOC_DFBMCS320
tristate

2
sound/soc/codecs/Makefile
View File

@ -24,6 +24,7 @@ snd-soc-cs4271-objs := cs4271.o
snd-soc-cx20442-objs := cx20442.o
snd-soc-da7210-objs := da7210.o
snd-soc-da732x-objs := da732x.o
snd-soc-da9055-objs := da9055.o
snd-soc-dfbmcs320-objs := dfbmcs320.o
snd-soc-dmic-objs := dmic.o
snd-soc-isabelle-objs := isabelle.o
@ -144,6 +145,7 @@ obj-$(CONFIG_SND_SOC_CS4271) += snd-soc-cs4271.o
obj-$(CONFIG_SND_SOC_CX20442) += snd-soc-cx20442.o
obj-$(CONFIG_SND_SOC_DA7210) += snd-soc-da7210.o
obj-$(CONFIG_SND_SOC_DA732X) += snd-soc-da732x.o
obj-$(CONFIG_SND_SOC_DA9055) += snd-soc-da9055.o
obj-$(CONFIG_SND_SOC_DFBMCS320) += snd-soc-dfbmcs320.o
obj-$(CONFIG_SND_SOC_DMIC) += snd-soc-dmic.o
obj-$(CONFIG_SND_SOC_ISABELLE) += snd-soc-isabelle.o

81
sound/soc/codecs/ab8500-codec.c
View File

@ -34,6 +34,7 @@
#include <linux/mfd/abx500/ab8500-sysctrl.h>
#include <linux/mfd/abx500/ab8500-codec.h>
#include <linux/regulator/consumer.h>
#include <linux/of.h>
#include <sound/core.h>
#include <sound/pcm.h>
@ -2394,9 +2395,65 @@ struct snd_soc_dai_driver ab8500_codec_dai[] = {
}
};
static void ab8500_codec_of_probe(struct device *dev, struct device_node *np,
struct ab8500_codec_platform_data *codec)
{
u32 value;
if (of_get_property(np, "stericsson,amic1-type-single-ended", NULL))
codec->amics.mic1_type = AMIC_TYPE_SINGLE_ENDED;
else
codec->amics.mic1_type = AMIC_TYPE_DIFFERENTIAL;
if (of_get_property(np, "stericsson,amic2-type-single-ended", NULL))
codec->amics.mic2_type = AMIC_TYPE_SINGLE_ENDED;
else
codec->amics.mic2_type = AMIC_TYPE_DIFFERENTIAL;
/* Has a non-standard Vamic been requested? */
if (of_get_property(np, "stericsson,amic1a-bias-vamic2", NULL))
codec->amics.mic1a_micbias = AMIC_MICBIAS_VAMIC2;
else
codec->amics.mic1a_micbias = AMIC_MICBIAS_VAMIC1;
if (of_get_property(np, "stericsson,amic1b-bias-vamic2", NULL))
codec->amics.mic1b_micbias = AMIC_MICBIAS_VAMIC2;
else
codec->amics.mic1b_micbias = AMIC_MICBIAS_VAMIC1;
if (of_get_property(np, "stericsson,amic2-bias-vamic1", NULL))
codec->amics.mic2_micbias = AMIC_MICBIAS_VAMIC1;
else
codec->amics.mic2_micbias = AMIC_MICBIAS_VAMIC2;
if (!of_property_read_u32(np, "stericsson,earpeice-cmv", &value)) {
switch (value) {
case 950 :
codec->ear_cmv = EAR_CMV_0_95V;
break;
case 1100 :
codec->ear_cmv = EAR_CMV_1_10V;
break;
case 1270 :
codec->ear_cmv = EAR_CMV_1_27V;
break;
case 1580 :
codec->ear_cmv = EAR_CMV_1_58V;
break;
default :
codec->ear_cmv = EAR_CMV_UNKNOWN;
dev_err(dev, "Unsuitable earpiece voltage found in DT\n");
}
} else {
dev_warn(dev, "No earpiece voltage found in DT - using default\n");
codec->ear_cmv = EAR_CMV_0_95V;
}
}
static int ab8500_codec_probe(struct snd_soc_codec *codec)
{
struct device *dev = codec->dev;
struct device_node *np = dev->of_node;
struct ab8500_codec_drvdata *drvdata = dev_get_drvdata(dev);
struct ab8500_platform_data *pdata;
struct filter_control *fc;
@ -2407,6 +2464,30 @@ static int ab8500_codec_probe(struct snd_soc_codec *codec)
/* Setup AB8500 according to board-settings */
pdata = dev_get_platdata(dev->parent);
if (np) {
if (!pdata)
pdata = devm_kzalloc(dev,
sizeof(struct ab8500_platform_data),
GFP_KERNEL);
if (pdata && !pdata->codec)
pdata->codec
= devm_kzalloc(dev,
sizeof(struct ab8500_codec_platform_data),
GFP_KERNEL);
if (!(pdata && pdata->codec))
return -ENOMEM;
ab8500_codec_of_probe(dev, np, pdata->codec);
} else {
if (!(pdata && pdata->codec)) {
dev_err(dev, "No codec platform data or DT found\n");
return -EINVAL;
}
}
status = ab8500_audio_setup_mics(codec, &pdata->codec->amics);
if (status < 0) {
pr_err("%s: Failed to setup mics (%d)!\n", __func__, status);

42
sound/soc/codecs/arizona.c
View File

@ -119,6 +119,24 @@ const char *arizona_mixer_texts[ARIZONA_NUM_MIXER_INPUTS] = {
"DSP1.4",
"DSP1.5",
"DSP1.6",
"DSP2.1",
"DSP2.2",
"DSP2.3",
"DSP2.4",
"DSP2.5",
"DSP2.6",
"DSP3.1",
"DSP3.2",
"DSP3.3",
"DSP3.4",
"DSP3.5",
"DSP3.6",
"DSP4.1",
"DSP4.2",
"DSP4.3",
"DSP4.4",
"DSP4.5",
"DSP4.6",
"ASRC1L",
"ASRC1R",
"ASRC2L",
@ -180,6 +198,24 @@ int arizona_mixer_values[ARIZONA_NUM_MIXER_INPUTS] = {
0x6b,
0x6c,
0x6d,
0x70, /* DSP2.1 */
0x71,
0x72,
0x73,
0x74,
0x75,
0x78, /* DSP3.1 */
0x79,
0x7a,
0x7b,
0x7c,
0x7d,
0x80, /* DSP4.1 */
0x81,
0x82,
0x83,
0x84,
0x85,
0x90, /* ASRC1L */
0x91,
0x92,
@ -234,6 +270,9 @@ static unsigned int arizona_sysclk_48k_rates[] = {
12288000,
22579200,
49152000,
73728000,
98304000,
147456000,
};
static unsigned int arizona_sysclk_44k1_rates[] = {
@ -241,6 +280,9 @@ static unsigned int arizona_sysclk_44k1_rates[] = {
11289600,
24576000,
45158400,
67737600,
90316800,
135475200,
};
static int arizona_set_opclk(struct snd_soc_codec *codec, unsigned int clk,

2
sound/soc/codecs/arizona.h
View File

@ -61,7 +61,7 @@ struct arizona_priv {
struct arizona_dai_priv dai[ARIZONA_MAX_DAI];
};
#define ARIZONA_NUM_MIXER_INPUTS 57
#define ARIZONA_NUM_MIXER_INPUTS 75
extern const unsigned int arizona_mixer_tlv[];
extern const char *arizona_mixer_texts[ARIZONA_NUM_MIXER_INPUTS];

4
sound/soc/codecs/cs4270.c
View File

@ -459,7 +459,7 @@ static struct snd_soc_dai_driver cs4270_dai = {
.name = "cs4270-hifi",
.playback = {
.stream_name = "Playback",
.channels_min = 1,
.channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_CONTINUOUS,
.rate_min = 4000,
@ -468,7 +468,7 @@ static struct snd_soc_dai_driver cs4270_dai = {
},
.capture = {
.stream_name = "Capture",
.channels_min = 1,
.channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_CONTINUOUS,
.rate_min = 4000,

24
sound/soc/codecs/cs4271.c
View File

@ -22,12 +22,14 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <sound/tlv.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <sound/tlv.h>
#include <sound/cs4271.h>
#define CS4271_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \
@ -458,6 +460,14 @@ static int cs4271_soc_resume(struct snd_soc_codec *codec)
#define cs4271_soc_resume NULL
#endif /* CONFIG_PM */
#ifdef CONFIG_OF
static const struct of_device_id cs4271_dt_ids[] = {
{ .compatible = "cirrus,cs4271", },
{ }
};
MODULE_DEVICE_TABLE(of, cs4271_dt_ids);
#endif
static int cs4271_probe(struct snd_soc_codec *codec)
{
struct cs4271_private *cs4271 = snd_soc_codec_get_drvdata(codec);
@ -465,6 +475,12 @@ static int cs4271_probe(struct snd_soc_codec *codec)
int ret;
int gpio_nreset = -EINVAL;
#ifdef CONFIG_OF
if (of_match_device(cs4271_dt_ids, codec->dev))
gpio_nreset = of_get_named_gpio(codec->dev->of_node,
"reset-gpio", 0);
#endif
if (cs4271plat && gpio_is_valid(cs4271plat->gpio_nreset))
gpio_nreset = cs4271plat->gpio_nreset;
@ -569,6 +585,7 @@ static struct spi_driver cs4271_spi_driver = {
.driver = {
.name = "cs4271",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(cs4271_dt_ids),
},
.probe = cs4271_spi_probe,
.remove = __devexit_p(cs4271_spi_remove),
@ -608,6 +625,7 @@ static struct i2c_driver cs4271_i2c_driver = {
.driver = {
.name = "cs4271",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(cs4271_dt_ids),
},
.id_table = cs4271_i2c_id,
.probe = cs4271_i2c_probe,

1510
sound/soc/codecs/da9055.c Normal file
View File

File diff suppressed because it is too large Load Diff

18
sound/soc/codecs/wm0010.c
View File

@ -168,7 +168,8 @@ static void wm0010_halt(struct snd_soc_codec *codec)
case WM0010_STAGE2:
case WM0010_FIRMWARE:
/* Remember to put chip back into reset */
gpio_set_value(wm0010->gpio_reset, wm0010->gpio_reset_value);
gpio_set_value_cansleep(wm0010->gpio_reset,
wm0010->gpio_reset_value);
/* Disable the regulators */
regulator_disable(wm0010->dbvdd);
regulator_bulk_disable(ARRAY_SIZE(wm0010->core_supplies),
@ -387,7 +388,7 @@ static int wm0010_boot(struct snd_soc_codec *codec)
}
/* Release reset */
gpio_set_value(wm0010->gpio_reset, !wm0010->gpio_reset_value);
gpio_set_value_cansleep(wm0010->gpio_reset, !wm0010->gpio_reset_value);
spin_lock_irqsave(&wm0010->irq_lock, flags);
wm0010->state = WM0010_OUT_OF_RESET;
spin_unlock_irqrestore(&wm0010->irq_lock, flags);
@ -809,7 +810,6 @@ static int wm0010_probe(struct snd_soc_codec *codec)
static int __devinit wm0010_spi_probe(struct spi_device *spi)
{
unsigned long flags;
unsigned long gpio_flags;
int ret;
int trigger;
@ -876,6 +876,8 @@ static int __devinit wm0010_spi_probe(struct spi_device *spi)
return -EINVAL;
}
wm0010->state = WM0010_POWER_OFF;
irq = spi->irq;
if (wm0010->pdata.irq_flags)
trigger = wm0010->pdata.irq_flags;
@ -897,10 +899,6 @@ static int __devinit wm0010_spi_probe(struct spi_device *spi)
else
wm0010->board_max_spi_speed = 0;
spin_lock_irqsave(&wm0010->irq_lock, flags);
wm0010->state = WM0010_POWER_OFF;
spin_unlock_irqrestore(&wm0010->irq_lock, flags);
ret = snd_soc_register_codec(&spi->dev,
&soc_codec_dev_wm0010, wm0010_dai,
ARRAY_SIZE(wm0010_dai));
@ -916,10 +914,8 @@ static int __devexit wm0010_spi_remove(struct spi_device *spi)
snd_soc_unregister_codec(&spi->dev);
if (wm0010->gpio_reset) {
/* Remember to put chip back into reset */
gpio_set_value(wm0010->gpio_reset, wm0010->gpio_reset_value);
}
gpio_set_value_cansleep(wm0010->gpio_reset,
wm0010->gpio_reset_value);
if (wm0010->irq)
free_irq(wm0010->irq, wm0010);

60
sound/soc/codecs/wm2000.c
View File

@ -31,6 +31,7 @@
#include <linux/i2c.h>
#include <linux/regmap.h>
#include <linux/debugfs.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
@ -43,6 +44,14 @@
#include "wm2000.h"
#define WM2000_NUM_SUPPLIES 3
static const char *wm2000_supplies[WM2000_NUM_SUPPLIES] = {
"SPKVDD",
"DBVDD",
"DCVDD",
};
enum wm2000_anc_mode {
ANC_ACTIVE = 0,
ANC_BYPASS = 1,
@ -54,6 +63,8 @@ struct wm2000_priv {
struct i2c_client *i2c;
struct regmap *regmap;
struct regulator_bulk_data supplies[WM2000_NUM_SUPPLIES];
enum wm2000_anc_mode anc_mode;
unsigned int anc_active:1;
@ -126,6 +137,12 @@ static int wm2000_power_up(struct i2c_client *i2c, int analogue)
dev_dbg(&i2c->dev, "Beginning power up\n");
ret = regulator_bulk_enable(WM2000_NUM_SUPPLIES, wm2000->supplies);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
return ret;
}
if (!wm2000->mclk_div) {
dev_dbg(&i2c->dev, "Disabling MCLK divider\n");
wm2000_write(i2c, WM2000_REG_SYS_CTL2,
@ -143,12 +160,14 @@ static int wm2000_power_up(struct i2c_client *i2c, int analogue)
if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
WM2000_ANC_ENG_IDLE)) {
dev_err(&i2c->dev, "ANC engine failed to reset\n");
regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies);
return -ETIMEDOUT;
}
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_BOOT_COMPLETE)) {
dev_err(&i2c->dev, "ANC engine failed to initialise\n");
regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies);
return -ETIMEDOUT;
}
@ -163,11 +182,13 @@ static int wm2000_power_up(struct i2c_client *i2c, int analogue)
wm2000->anc_download_size);
if (ret < 0) {
dev_err(&i2c->dev, "i2c_transfer() failed: %d\n", ret);
regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies);
return ret;
}
if (ret != wm2000->anc_download_size) {
dev_err(&i2c->dev, "i2c_transfer() failed, %d != %d\n",
ret, wm2000->anc_download_size);
regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies);
return -EIO;
}
@ -201,6 +222,7 @@ static int wm2000_power_up(struct i2c_client *i2c, int analogue)
if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
WM2000_STATUS_MOUSE_ACTIVE)) {
dev_err(&i2c->dev, "Timed out waiting for device\n");
regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies);
return -ETIMEDOUT;
}
@ -238,6 +260,8 @@ static int wm2000_power_down(struct i2c_client *i2c, int analogue)
return -ETIMEDOUT;
}
regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies);
dev_dbg(&i2c->dev, "powered off\n");
wm2000->anc_mode = ANC_OFF;
@ -747,7 +771,7 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c,
struct wm2000_platform_data *pdata;
const char *filename;
const struct firmware *fw = NULL;
int ret;
int ret, i;
int reg;
u16 id;
@ -760,7 +784,7 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c,
dev_set_drvdata(&i2c->dev, wm2000);
wm2000->regmap = regmap_init_i2c(i2c, &wm2000_regmap);
wm2000->regmap = devm_regmap_init_i2c(i2c, &wm2000_regmap);
if (IS_ERR(wm2000->regmap)) {
ret = PTR_ERR(wm2000->regmap);
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
@ -768,6 +792,22 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c,
goto out;
}
for (i = 0; i < WM2000_NUM_SUPPLIES; i++)
wm2000->supplies[i].supply = wm2000_supplies[i];
ret = devm_regulator_bulk_get(&i2c->dev, WM2000_NUM_SUPPLIES,
wm2000->supplies);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to get supplies: %d\n", ret);
return ret;
}
ret = regulator_bulk_enable(WM2000_NUM_SUPPLIES, wm2000->supplies);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
return ret;
}
/* Verify that this is a WM2000 */
reg = wm2000_read(i2c, WM2000_REG_ID1);
id = reg << 8;
@ -777,7 +817,7 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c,
if (id != 0x2000) {
dev_err(&i2c->dev, "Device is not a WM2000 - ID %x\n", id);
ret = -ENODEV;
goto out_regmap_exit;
goto err_supplies;
}
reg = wm2000_read(i2c, WM2000_REG_REVISON);
@ -796,7 +836,7 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c,
ret = request_firmware(&fw, filename, &i2c->dev);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to acquire ANC data: %d\n", ret);
goto out_regmap_exit;
goto err_supplies;
}
/* Pre-cook the concatenation of the register address onto the image */
@ -807,7 +847,7 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c,
if (wm2000->anc_download == NULL) {
dev_err(&i2c->dev, "Out of memory\n");
ret = -ENOMEM;
goto out_regmap_exit;
goto err_supplies;
}
wm2000->anc_download[0] = 0x80;
@ -822,11 +862,10 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c,
wm2000_reset(wm2000);
ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm2000, NULL, 0);
if (!ret)
goto out;
out_regmap_exit:
regmap_exit(wm2000->regmap);
err_supplies:
regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies);
out:
release_firmware(fw);
return ret;
@ -834,10 +873,7 @@ out:
static __devexit int wm2000_i2c_remove(struct i2c_client *i2c)
{
struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
snd_soc_unregister_codec(&i2c->dev);
regmap_exit(wm2000->regmap);
return 0;
}

2
sound/soc/codecs/wm5102.c
View File

@ -308,7 +308,7 @@ SND_SOC_DAPM_SUPPLY("ASYNCOPCLK", ARIZONA_OUTPUT_ASYNC_CLOCK,
SND_SOC_DAPM_REGULATOR_SUPPLY("DBVDD2", 0, 0),
SND_SOC_DAPM_REGULATOR_SUPPLY("DBVDD3", 0, 0),
SND_SOC_DAPM_REGULATOR_SUPPLY("CPVDD", 20, 0),
SND_SOC_DAPM_REGULATOR_SUPPLY("MICVDD", 0, 0),
SND_SOC_DAPM_REGULATOR_SUPPLY("MICVDD", 0, SND_SOC_DAPM_REGULATOR_BYPASS),
SND_SOC_DAPM_REGULATOR_SUPPLY("SPKVDDL", 0, 0),
SND_SOC_DAPM_REGULATOR_SUPPLY("SPKVDDR", 0, 0),

79
sound/soc/codecs/wm5110.c
View File

@ -153,6 +153,15 @@ SOC_ENUM("LHPF2 Mode", arizona_lhpf2_mode),
SOC_ENUM("LHPF3 Mode", arizona_lhpf3_mode),
SOC_ENUM("LHPF4 Mode", arizona_lhpf4_mode),
ARIZONA_MIXER_CONTROLS("DSP1L", ARIZONA_DSP1LMIX_INPUT_1_SOURCE),
ARIZONA_MIXER_CONTROLS("DSP1R", ARIZONA_DSP1RMIX_INPUT_1_SOURCE),
ARIZONA_MIXER_CONTROLS("DSP2L", ARIZONA_DSP2LMIX_INPUT_1_SOURCE),
ARIZONA_MIXER_CONTROLS("DSP2R", ARIZONA_DSP2RMIX_INPUT_1_SOURCE),
ARIZONA_MIXER_CONTROLS("DSP3L", ARIZONA_DSP3LMIX_INPUT_1_SOURCE),
ARIZONA_MIXER_CONTROLS("DSP3R", ARIZONA_DSP3RMIX_INPUT_1_SOURCE),
ARIZONA_MIXER_CONTROLS("DSP4L", ARIZONA_DSP4LMIX_INPUT_1_SOURCE),
ARIZONA_MIXER_CONTROLS("DSP5R", ARIZONA_DSP4RMIX_INPUT_1_SOURCE),
ARIZONA_MIXER_CONTROLS("Mic", ARIZONA_MICMIX_INPUT_1_SOURCE),
ARIZONA_MIXER_CONTROLS("Noise", ARIZONA_NOISEMIX_INPUT_1_SOURCE),
@ -163,7 +172,8 @@ ARIZONA_MIXER_CONTROLS("HPOUT1L", ARIZONA_OUT1LMIX_INPUT_1_SOURCE),
ARIZONA_MIXER_CONTROLS("HPOUT1R", ARIZONA_OUT1RMIX_INPUT_1_SOURCE),
ARIZONA_MIXER_CONTROLS("HPOUT2L", ARIZONA_OUT2LMIX_INPUT_1_SOURCE),
ARIZONA_MIXER_CONTROLS("HPOUT2R", ARIZONA_OUT2RMIX_INPUT_1_SOURCE),
ARIZONA_MIXER_CONTROLS("EPOUT", ARIZONA_OUT3LMIX_INPUT_1_SOURCE),
ARIZONA_MIXER_CONTROLS("HPOUT3L", ARIZONA_OUT3LMIX_INPUT_1_SOURCE),
ARIZONA_MIXER_CONTROLS("HPOUT3R", ARIZONA_OUT3RMIX_INPUT_1_SOURCE),
ARIZONA_MIXER_CONTROLS("SPKOUTL", ARIZONA_OUT4LMIX_INPUT_1_SOURCE),
ARIZONA_MIXER_CONTROLS("SPKOUTR", ARIZONA_OUT4RMIX_INPUT_1_SOURCE),
ARIZONA_MIXER_CONTROLS("SPKDAT1L", ARIZONA_OUT5LMIX_INPUT_1_SOURCE),
@ -175,7 +185,7 @@ SOC_SINGLE("HPOUT1 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_1L,
ARIZONA_OUT1_OSR_SHIFT, 1, 0),
SOC_SINGLE("OUT2 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_2L,
ARIZONA_OUT2_OSR_SHIFT, 1, 0),
SOC_SINGLE("EPOUT High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_3L,
SOC_SINGLE("OUT3 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_3L,
ARIZONA_OUT3_OSR_SHIFT, 1, 0),
SOC_SINGLE("Speaker High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_4L,
ARIZONA_OUT4_OSR_SHIFT, 1, 0),
@ -188,8 +198,8 @@ SOC_DOUBLE_R("HPOUT1 Digital Switch", ARIZONA_DAC_DIGITAL_VOLUME_1L,
ARIZONA_DAC_DIGITAL_VOLUME_1R, ARIZONA_OUT1L_MUTE_SHIFT, 1, 1),
SOC_DOUBLE_R("OUT2 Digital Switch", ARIZONA_DAC_DIGITAL_VOLUME_2L,
ARIZONA_DAC_DIGITAL_VOLUME_2R, ARIZONA_OUT2L_MUTE_SHIFT, 1, 1),
SOC_SINGLE("EPOUT Digital Switch", ARIZONA_DAC_DIGITAL_VOLUME_3L,
ARIZONA_OUT3L_MUTE_SHIFT, 1, 1),
SOC_DOUBLE_R("OUT3 Digital Switch", ARIZONA_DAC_DIGITAL_VOLUME_3L,
ARIZONA_DAC_DIGITAL_VOLUME_3R, ARIZONA_OUT3L_MUTE_SHIFT, 1, 1),
SOC_DOUBLE_R("Speaker Digital Switch", ARIZONA_DAC_DIGITAL_VOLUME_4L,
ARIZONA_DAC_DIGITAL_VOLUME_4R, ARIZONA_OUT4L_MUTE_SHIFT, 1, 1),
SOC_DOUBLE_R("SPKDAT1 Digital Switch", ARIZONA_DAC_DIGITAL_VOLUME_5L,
@ -203,8 +213,9 @@ SOC_DOUBLE_R_TLV("HPOUT1 Digital Volume", ARIZONA_DAC_DIGITAL_VOLUME_1L,
SOC_DOUBLE_R_TLV("OUT2 Digital Volume", ARIZONA_DAC_DIGITAL_VOLUME_2L,
ARIZONA_DAC_DIGITAL_VOLUME_2R, ARIZONA_OUT2L_VOL_SHIFT,
0xbf, 0, digital_tlv),
SOC_SINGLE_TLV("EPOUT Digital Volume", ARIZONA_DAC_DIGITAL_VOLUME_3L,
ARIZONA_OUT3L_VOL_SHIFT, 0xbf, 0, digital_tlv),
SOC_DOUBLE_R_TLV("OUT3 Digital Volume", ARIZONA_DAC_DIGITAL_VOLUME_3L,
ARIZONA_DAC_DIGITAL_VOLUME_3R, ARIZONA_OUT3L_VOL_SHIFT,
0xbf, 0, digital_tlv),
SOC_DOUBLE_R_TLV("Speaker Digital Volume", ARIZONA_DAC_DIGITAL_VOLUME_4L,
ARIZONA_DAC_DIGITAL_VOLUME_4R, ARIZONA_OUT4L_VOL_SHIFT,
0xbf, 0, digital_tlv),
@ -223,8 +234,9 @@ SOC_DOUBLE_R_RANGE_TLV("OUT2 Volume", ARIZONA_OUTPUT_PATH_CONFIG_2L,
ARIZONA_OUTPUT_PATH_CONFIG_2R,
ARIZONA_OUT2L_PGA_VOL_SHIFT,
0x34, 0x40, 0, ana_tlv),
SOC_SINGLE_RANGE_TLV("EPOUT Volume", ARIZONA_OUTPUT_PATH_CONFIG_3L,
ARIZONA_OUT3L_PGA_VOL_SHIFT, 0x34, 0x40, 0, ana_tlv),
SOC_DOUBLE_R_RANGE_TLV("OUT3 Volume", ARIZONA_OUTPUT_PATH_CONFIG_3L,
ARIZONA_OUTPUT_PATH_CONFIG_3R,
ARIZONA_OUT3L_PGA_VOL_SHIFT, 0x34, 0x40, 0, ana_tlv),
SOC_DOUBLE("SPKDAT1 Switch", ARIZONA_PDM_SPK1_CTRL_1, ARIZONA_SPK1L_MUTE_SHIFT,
ARIZONA_SPK1R_MUTE_SHIFT, 1, 1),
@ -272,7 +284,8 @@ ARIZONA_MIXER_ENUMS(OUT1L, ARIZONA_OUT1LMIX_INPUT_1_SOURCE);
ARIZONA_MIXER_ENUMS(OUT1R, ARIZONA_OUT1RMIX_INPUT_1_SOURCE);
ARIZONA_MIXER_ENUMS(OUT2L, ARIZONA_OUT2LMIX_INPUT_1_SOURCE);
ARIZONA_MIXER_ENUMS(OUT2R, ARIZONA_OUT2RMIX_INPUT_1_SOURCE);
ARIZONA_MIXER_ENUMS(OUT3, ARIZONA_OUT3LMIX_INPUT_1_SOURCE);
ARIZONA_MIXER_ENUMS(OUT3L, ARIZONA_OUT3LMIX_INPUT_1_SOURCE);
ARIZONA_MIXER_ENUMS(OUT3R, ARIZONA_OUT3RMIX_INPUT_1_SOURCE);
ARIZONA_MIXER_ENUMS(SPKOUTL, ARIZONA_OUT4LMIX_INPUT_1_SOURCE);
ARIZONA_MIXER_ENUMS(SPKOUTR, ARIZONA_OUT4RMIX_INPUT_1_SOURCE);
ARIZONA_MIXER_ENUMS(SPKDAT1L, ARIZONA_OUT5LMIX_INPUT_1_SOURCE);
@ -300,6 +313,26 @@ ARIZONA_MIXER_ENUMS(ASRC1R, ARIZONA_ASRC1RMIX_INPUT_1_SOURCE);
ARIZONA_MIXER_ENUMS(ASRC2L, ARIZONA_ASRC2LMIX_INPUT_1_SOURCE);
ARIZONA_MIXER_ENUMS(ASRC2R, ARIZONA_ASRC2RMIX_INPUT_1_SOURCE);
static const char *wm5110_aec_loopback_texts[] = {
"HPOUT1L", "HPOUT1R", "HPOUT2L", "HPOUT2R", "HPOUT3L", "HPOUT3R",
"SPKOUTL", "SPKOUTR", "SPKDAT1L", "SPKDAT1R", "SPKDAT2L", "SPKDAT2R",
};
static const unsigned int wm5110_aec_loopback_values[] = {
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11,
};
static const struct soc_enum wm5110_aec_loopback =
SOC_VALUE_ENUM_SINGLE(ARIZONA_DAC_AEC_CONTROL_1,
ARIZONA_AEC_LOOPBACK_SRC_SHIFT,
ARIZONA_AEC_LOOPBACK_SRC_MASK,
ARRAY_SIZE(wm5110_aec_loopback_texts),
wm5110_aec_loopback_texts,
wm5110_aec_loopback_values);
static const struct snd_kcontrol_new wm5110_aec_loopback_mux =
SOC_DAPM_VALUE_ENUM("AEC Loopback", wm5110_aec_loopback);
static const struct snd_soc_dapm_widget wm5110_dapm_widgets[] = {
SND_SOC_DAPM_SUPPLY("SYSCLK", ARIZONA_SYSTEM_CLOCK_1, ARIZONA_SYSCLK_ENA_SHIFT,
0, NULL, 0),
@ -313,7 +346,7 @@ SND_SOC_DAPM_SUPPLY("ASYNCOPCLK", ARIZONA_OUTPUT_ASYNC_CLOCK,
SND_SOC_DAPM_REGULATOR_SUPPLY("DBVDD2", 0, 0),
SND_SOC_DAPM_REGULATOR_SUPPLY("DBVDD3", 0, 0),
SND_SOC_DAPM_REGULATOR_SUPPLY("CPVDD", 20, 0),
SND_SOC_DAPM_REGULATOR_SUPPLY("MICVDD", 0, 0),
SND_SOC_DAPM_REGULATOR_SUPPLY("MICVDD", 0, SND_SOC_DAPM_REGULATOR_BYPASS),
SND_SOC_DAPM_REGULATOR_SUPPLY("SPKVDDL", 0, 0),
SND_SOC_DAPM_REGULATOR_SUPPLY("SPKVDDR", 0, 0),
@ -409,6 +442,9 @@ SND_SOC_DAPM_PGA("ASRC2L", ARIZONA_ASRC_ENABLE, ARIZONA_ASRC2L_ENA_SHIFT, 0,
SND_SOC_DAPM_PGA("ASRC2R", ARIZONA_ASRC_ENABLE, ARIZONA_ASRC2R_ENA_SHIFT, 0,
NULL, 0),
SND_SOC_DAPM_VALUE_MUX("AEC Loopback", ARIZONA_DAC_AEC_CONTROL_1,
ARIZONA_AEC_LOOPBACK_ENA, 0, &wm5110_aec_loopback_mux),
SND_SOC_DAPM_AIF_OUT("AIF1TX1", NULL, 0,
ARIZONA_AIF1_TX_ENABLES, ARIZONA_AIF1TX1_ENA_SHIFT, 0),
SND_SOC_DAPM_AIF_OUT("AIF1TX2", NULL, 0,
@ -478,6 +514,9 @@ SND_SOC_DAPM_PGA_E("OUT2R", ARIZONA_OUTPUT_ENABLES_1,
SND_SOC_DAPM_PGA_E("OUT3L", ARIZONA_OUTPUT_ENABLES_1,
ARIZONA_OUT3L_ENA_SHIFT, 0, NULL, 0, arizona_out_ev,
SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_PGA_E("OUT3R", ARIZONA_OUTPUT_ENABLES_1,
ARIZONA_OUT3R_ENA_SHIFT, 0, NULL, 0, arizona_out_ev,
SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_PGA_E("OUT4L", ARIZONA_OUTPUT_ENABLES_1,
ARIZONA_OUT4L_ENA_SHIFT, 0, NULL, 0, arizona_out_ev,
SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),
@ -522,7 +561,8 @@ ARIZONA_MIXER_WIDGETS(OUT1L, "HPOUT1L"),
ARIZONA_MIXER_WIDGETS(OUT1R, "HPOUT1R"),
ARIZONA_MIXER_WIDGETS(OUT2L, "HPOUT2L"),
ARIZONA_MIXER_WIDGETS(OUT2R, "HPOUT2R"),
ARIZONA_MIXER_WIDGETS(OUT3, "EPOUT"),
ARIZONA_MIXER_WIDGETS(OUT3L, "HPOUT3L"),
ARIZONA_MIXER_WIDGETS(OUT3R, "HPOUT3R"),
ARIZONA_MIXER_WIDGETS(SPKOUTL, "SPKOUTL"),
ARIZONA_MIXER_WIDGETS(SPKOUTR, "SPKOUTR"),
ARIZONA_MIXER_WIDGETS(SPKDAT1L, "SPKDAT1L"),
@ -554,8 +594,8 @@ SND_SOC_DAPM_OUTPUT("HPOUT1L"),
SND_SOC_DAPM_OUTPUT("HPOUT1R"),
SND_SOC_DAPM_OUTPUT("HPOUT2L"),
SND_SOC_DAPM_OUTPUT("HPOUT2R"),
SND_SOC_DAPM_OUTPUT("EPOUTN"),
SND_SOC_DAPM_OUTPUT("EPOUTP"),
SND_SOC_DAPM_OUTPUT("HPOUT3L"),
SND_SOC_DAPM_OUTPUT("HPOUT3R"),
SND_SOC_DAPM_OUTPUT("SPKOUTLN"),
SND_SOC_DAPM_OUTPUT("SPKOUTLP"),
SND_SOC_DAPM_OUTPUT("SPKOUTRN"),
@ -570,6 +610,7 @@ SND_SOC_DAPM_OUTPUT("SPKDAT2R"),
{ name, "Noise Generator", "Noise Generator" }, \
{ name, "Tone Generator 1", "Tone Generator 1" }, \
{ name, "Tone Generator 2", "Tone Generator 2" }, \
{ name, "AEC", "AEC Loopback" }, \
{ name, "IN1L", "IN1L PGA" }, \
{ name, "IN1R", "IN1R PGA" }, \
{ name, "IN2L", "IN2L PGA" }, \
@ -620,6 +661,7 @@ static const struct snd_soc_dapm_route wm5110_dapm_routes[] = {
{ "OUT2L", NULL, "CPVDD" },
{ "OUT2R", NULL, "CPVDD" },
{ "OUT3L", NULL, "CPVDD" },
{ "OUT3R", NULL, "CPVDD" },
{ "OUT4L", NULL, "SPKVDDL" },
{ "OUT4R", NULL, "SPKVDDR" },
@ -701,7 +743,8 @@ static const struct snd_soc_dapm_route wm5110_dapm_routes[] = {
ARIZONA_MIXER_ROUTES("OUT1R", "HPOUT1R"),
ARIZONA_MIXER_ROUTES("OUT2L", "HPOUT2L"),
ARIZONA_MIXER_ROUTES("OUT2R", "HPOUT2R"),
ARIZONA_MIXER_ROUTES("OUT3L", "EPOUT"),
ARIZONA_MIXER_ROUTES("OUT3L", "HPOUT3L"),
ARIZONA_MIXER_ROUTES("OUT3R", "HPOUT3R"),
ARIZONA_MIXER_ROUTES("OUT4L", "SPKOUTL"),
ARIZONA_MIXER_ROUTES("OUT4R", "SPKOUTR"),
@ -754,8 +797,8 @@ static const struct snd_soc_dapm_route wm5110_dapm_routes[] = {
{ "HPOUT2L", NULL, "OUT2L" },
{ "HPOUT2R", NULL, "OUT2R" },
{ "EPOUTN", NULL, "OUT3L" },
{ "EPOUTP", NULL, "OUT3L" },
{ "HPOUT3L", NULL, "OUT3L" },
{ "HPOUT3R", NULL, "OUT3L" },
{ "SPKOUTLN", NULL, "OUT4L" },
{ "SPKOUTLP", NULL, "OUT4L" },
@ -873,6 +916,8 @@ static unsigned int wm5110_digital_vu[] = {
ARIZONA_ADC_DIGITAL_VOLUME_2R,
ARIZONA_ADC_DIGITAL_VOLUME_3L,
ARIZONA_ADC_DIGITAL_VOLUME_3R,
ARIZONA_ADC_DIGITAL_VOLUME_4L,
ARIZONA_ADC_DIGITAL_VOLUME_4R,
ARIZONA_DAC_DIGITAL_VOLUME_1L,
ARIZONA_DAC_DIGITAL_VOLUME_1R,
@ -884,6 +929,8 @@ static unsigned int wm5110_digital_vu[] = {
ARIZONA_DAC_DIGITAL_VOLUME_4R,
ARIZONA_DAC_DIGITAL_VOLUME_5L,
ARIZONA_DAC_DIGITAL_VOLUME_5R,
ARIZONA_DAC_DIGITAL_VOLUME_6L,
ARIZONA_DAC_DIGITAL_VOLUME_6R,
};
static struct snd_soc_codec_driver soc_codec_dev_wm5110 = {

5
sound/soc/codecs/wm_hubs.c
View File

@ -681,6 +681,11 @@ void wm_hubs_update_class_w(struct snd_soc_codec *codec)
snd_soc_update_bits(codec, WM8993_CLASS_W_0,
WM8993_CP_DYN_V | WM8993_CP_DYN_FREQ, enable);
snd_soc_write(codec, WM8993_LEFT_OUTPUT_VOLUME,
snd_soc_read(codec, WM8993_LEFT_OUTPUT_VOLUME));
snd_soc_write(codec, WM8993_RIGHT_OUTPUT_VOLUME,
snd_soc_read(codec, WM8993_RIGHT_OUTPUT_VOLUME));
}
EXPORT_SYMBOL_GPL(wm_hubs_update_class_w);

37
sound/soc/fsl/eukrea-tlv320.c
View File

@ -93,9 +93,7 @@ static struct snd_soc_card eukrea_tlv320 = {
.num_links = 1,
};
static struct platform_device *eukrea_tlv320_snd_device;
static int __init eukrea_tlv320_init(void)
static int __devinit eukrea_tlv320_probe(struct platform_device *pdev)
{
int ret;
int int_port = 0, ext_port;
@ -136,29 +134,32 @@ static int __init eukrea_tlv320_init(void)
return 0;
}
eukrea_tlv320_snd_device = platform_device_alloc("soc-audio", -1);
if (!eukrea_tlv320_snd_device)
return -ENOMEM;
platform_set_drvdata(eukrea_tlv320_snd_device, &eukrea_tlv320);
ret = platform_device_add(eukrea_tlv320_snd_device);
if (ret) {
printk(KERN_ERR "ASoC: Platform device allocation failed\n");
platform_device_put(eukrea_tlv320_snd_device);
}
eukrea_tlv320.dev = &pdev->dev;
ret = snd_soc_register_card(&eukrea_tlv320);
if (ret)
dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
return ret;
}
static void __exit eukrea_tlv320_exit(void)
static int __devexit eukrea_tlv320_remove(struct platform_device *pdev)
{
platform_device_unregister(eukrea_tlv320_snd_device);
snd_soc_unregister_card(&eukrea_tlv320);
return 0;
}
module_init(eukrea_tlv320_init);
module_exit(eukrea_tlv320_exit);
static struct platform_driver eukrea_tlv320_driver = {
.driver = {
.name = "eukrea_tlv320",
.owner = THIS_MODULE,
},
.probe = eukrea_tlv320_probe,
.remove = __devexit_p(eukrea_tlv320_remove),};
module_platform_driver(eukrea_tlv320_driver);
MODULE_AUTHOR("Eric Bénard <eric@eukrea.com>");
MODULE_DESCRIPTION("CPUIMX ALSA SoC driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:eukrea_tlv320");

23
sound/soc/soc-dapm.c
View File

@ -1017,10 +1017,29 @@ EXPORT_SYMBOL_GPL(dapm_reg_event);
int dapm_regulator_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
if (SND_SOC_DAPM_EVENT_ON(event))
int ret;
if (SND_SOC_DAPM_EVENT_ON(event)) {
if (w->invert & SND_SOC_DAPM_REGULATOR_BYPASS) {
ret = regulator_allow_bypass(w->regulator, true);
if (ret != 0)
dev_warn(w->dapm->dev,
"Failed to bypass %s: %d\n",
w->name, ret);
}
return regulator_enable(w->regulator);
else
} else {
if (w->invert & SND_SOC_DAPM_REGULATOR_BYPASS) {
ret = regulator_allow_bypass(w->regulator, false);
if (ret != 0)
dev_warn(w->dapm->dev,
"Failed to unbypass %s: %d\n",
w->name, ret);
}
return regulator_disable_deferred(w->regulator, w->shift);
}
}
EXPORT_SYMBOL_GPL(dapm_regulator_event);

47
sound/soc/ux500/mop500.c
View File

@ -16,6 +16,7 @@
#include <linux/module.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/of.h>
#include <sound/soc.h>
#include <sound/initval.h>
@ -56,16 +57,47 @@ static struct snd_soc_card mop500_card = {
.num_links = ARRAY_SIZE(mop500_dai_links),
};
static int __devinit mop500_of_probe(struct platform_device *pdev,
struct device_node *np)
{
struct device_node *codec_np, *msp_np[2];
int i;
msp_np[0] = of_parse_phandle(np, "stericsson,cpu-dai", 0);
msp_np[1] = of_parse_phandle(np, "stericsson,cpu-dai", 1);
codec_np = of_parse_phandle(np, "stericsson,audio-codec", 0);
if (!(msp_np[0] && msp_np[1] && codec_np)) {
dev_err(&pdev->dev, "Phandle missing or invalid\n");
return -EINVAL;
}
for (i = 0; i < 2; i++) {
mop500_dai_links[i].cpu_of_node = msp_np[i];
mop500_dai_links[i].cpu_dai_name = NULL;
mop500_dai_links[i].codec_of_node = codec_np;
mop500_dai_links[i].codec_name = NULL;
}
snd_soc_of_parse_card_name(&mop500_card, "stericsson,card-name");
return 0;
}
static int __devinit mop500_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
int ret;
pr_debug("%s: Enter.\n", __func__);
dev_dbg(&pdev->dev, "%s: Enter.\n", __func__);
mop500_card.dev = &pdev->dev;
if (np) {
ret = mop500_of_probe(pdev, np);
if (ret)
return ret;
}
dev_dbg(&pdev->dev, "%s: Card %s: Set platform drvdata.\n",
__func__, mop500_card.name);
platform_set_drvdata(pdev, &mop500_card);
@ -83,8 +115,7 @@ static int __devinit mop500_probe(struct platform_device *pdev)
ret = snd_soc_register_card(&mop500_card);
if (ret)
dev_err(&pdev->dev,
"Error: snd_soc_register_card failed (%d)!\n",
ret);
"Error: snd_soc_register_card failed (%d)!\n", ret);
return ret;
}
@ -97,14 +128,20 @@ static int __devexit mop500_remove(struct platform_device *pdev)
snd_soc_unregister_card(mop500_card);
mop500_ab8500_remove(mop500_card);
return 0;
}
static const struct of_device_id snd_soc_mop500_match[] = {
{ .compatible = "stericsson,snd-soc-mop500", },
{},
};
static struct platform_driver snd_soc_mop500_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "snd-soc-mop500",
.of_match_table = snd_soc_mop500_match,
},
.probe = mop500_probe,
.remove = __devexit_p(mop500_remove),

6
sound/soc/ux500/ux500_msp_dai.c
View File

@ -833,10 +833,16 @@ static int __devexit ux500_msp_drv_remove(struct platform_device *pdev)
return 0;
}
static const struct of_device_id ux500_msp_i2s_match[] = {
{ .compatible = "stericsson,ux500-msp-i2s", },
{},
};
static struct platform_driver msp_i2s_driver = {
.driver = {
.name = "ux500-msp-i2s",
.owner = THIS_MODULE,
.of_match_table = ux500_msp_i2s_match,
},
.probe = ux500_msp_drv_probe,
.remove = ux500_msp_drv_remove,

89
sound/soc/ux500/ux500_msp_i2s.c
View File

@ -15,8 +15,10 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pinctrl/consumer.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <mach/hardware.h>
#include <mach/msp.h>
@ -25,6 +27,9 @@
#include "ux500_msp_i2s.h"
/* MSP1/3 Tx/Rx usage protection */
static DEFINE_SPINLOCK(msp_rxtx_lock);
/* Protocol desciptors */
static const struct msp_protdesc prot_descs[] = {
{ /* I2S */
@ -352,17 +357,23 @@ static int configure_multichannel(struct ux500_msp *msp,
static int enable_msp(struct ux500_msp *msp, struct ux500_msp_config *config)
{
int status = 0;
int status = 0, retval = 0;
u32 reg_val_DMACR, reg_val_GCR;
unsigned long flags;
/* Check msp state whether in RUN or CONFIGURED Mode */
if ((msp->msp_state == MSP_STATE_IDLE) && (msp->plat_init)) {
status = msp->plat_init();
if (status) {
dev_err(msp->dev, "%s: ERROR: Failed to init MSP (%d)!\n",
__func__, status);
return status;
if (msp->msp_state == MSP_STATE_IDLE) {
spin_lock_irqsave(&msp_rxtx_lock, flags);
if (msp->pinctrl_rxtx_ref == 0 &&
!(IS_ERR(msp->pinctrl_p) || IS_ERR(msp->pinctrl_def))) {
retval = pinctrl_select_state(msp->pinctrl_p,
msp->pinctrl_def);
if (retval)
pr_err("could not set MSP defstate\n");
}
if (!retval)
msp->pinctrl_rxtx_ref++;
spin_unlock_irqrestore(&msp_rxtx_lock, flags);
}
/* Configure msp with protocol dependent settings */
@ -620,7 +631,8 @@ int ux500_msp_i2s_trigger(struct ux500_msp *msp, int cmd, int direction)
int ux500_msp_i2s_close(struct ux500_msp *msp, unsigned int dir)
{
int status = 0;
int status = 0, retval = 0;
unsigned long flags;
dev_dbg(msp->dev, "%s: Enter (dir = 0x%01x).\n", __func__, dir);
@ -631,12 +643,19 @@ int ux500_msp_i2s_close(struct ux500_msp *msp, unsigned int dir)
writel((readl(msp->registers + MSP_GCR) &
(~(FRAME_GEN_ENABLE | SRG_ENABLE))),
msp->registers + MSP_GCR);
if (msp->plat_exit)
status = msp->plat_exit();
if (status)
dev_warn(msp->dev,
"%s: WARN: ux500_msp_i2s_exit failed (%d)!\n",
__func__, status);
spin_lock_irqsave(&msp_rxtx_lock, flags);
WARN_ON(!msp->pinctrl_rxtx_ref);
msp->pinctrl_rxtx_ref--;
if (msp->pinctrl_rxtx_ref == 0 &&
!(IS_ERR(msp->pinctrl_p) || IS_ERR(msp->pinctrl_sleep))) {
retval = pinctrl_select_state(msp->pinctrl_p,
msp->pinctrl_sleep);
if (retval)
pr_err("could not set MSP sleepstate\n");
}
spin_unlock_irqrestore(&msp_rxtx_lock, flags);
writel(0, msp->registers + MSP_GCR);
writel(0, msp->registers + MSP_TCF);
writel(0, msp->registers + MSP_RCF);
@ -665,20 +684,33 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev,
{
struct resource *res = NULL;
struct i2s_controller *i2s_cont;
struct device_node *np = pdev->dev.of_node;
struct ux500_msp *msp;
dev_dbg(&pdev->dev, "%s: Enter (name: %s, id: %d).\n", __func__,
pdev->name, platform_data->id);
*msp_p = devm_kzalloc(&pdev->dev, sizeof(struct ux500_msp), GFP_KERNEL);
msp = *msp_p;
if (!msp)
return -ENOMEM;
if (np) {
if (!platform_data) {
platform_data = devm_kzalloc(&pdev->dev,
sizeof(struct msp_i2s_platform_data), GFP_KERNEL);
if (!platform_data)
ret = -ENOMEM;
}
} else
if (!platform_data)
ret = -EINVAL;
if (ret)
goto err_res;
dev_dbg(&pdev->dev, "%s: Enter (name: %s, id: %d).\n", __func__,
pdev->name, platform_data->id);
msp->id = platform_data->id;
msp->dev = &pdev->dev;
msp->plat_init = platform_data->msp_i2s_init;
msp->plat_exit = platform_data->msp_i2s_exit;
msp->dma_cfg_rx = platform_data->msp_i2s_dma_rx;
msp->dma_cfg_tx = platform_data->msp_i2s_dma_tx;
@ -715,6 +747,25 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev,
dev_dbg(&pdev->dev, "I2S device-name: '%s'\n", i2s_cont->name);
msp->i2s_cont = i2s_cont;
msp->pinctrl_p = pinctrl_get(msp->dev);
if (IS_ERR(msp->pinctrl_p))
dev_err(&pdev->dev, "could not get MSP pinctrl\n");
else {
msp->pinctrl_def = pinctrl_lookup_state(msp->pinctrl_p,
PINCTRL_STATE_DEFAULT);
if (IS_ERR(msp->pinctrl_def)) {
dev_err(&pdev->dev,
"could not get MSP defstate (%li)\n",
PTR_ERR(msp->pinctrl_def));
}
msp->pinctrl_sleep = pinctrl_lookup_state(msp->pinctrl_p,
PINCTRL_STATE_SLEEP);
if (IS_ERR(msp->pinctrl_sleep))
dev_err(&pdev->dev,
"could not get MSP idlestate (%li)\n",
PTR_ERR(msp->pinctrl_def));
}
return 0;
}

8
sound/soc/ux500/ux500_msp_i2s.h
View File

@ -524,14 +524,18 @@ struct ux500_msp {
struct dma_chan *rx_pipeid;
enum msp_state msp_state;
int (*transfer) (struct ux500_msp *msp, struct i2s_message *message);
int (*plat_init) (void);
int (*plat_exit) (void);
struct timer_list notify_timer;
int def_elem_len;
unsigned int dir_busy;
int loopback_enable;
u32 backup_regs[MAX_MSP_BACKUP_REGS];
unsigned int f_bitclk;
/* Pin modes */
struct pinctrl *pinctrl_p;
struct pinctrl_state *pinctrl_def;
struct pinctrl_state *pinctrl_sleep;
/* Reference Count */
int pinctrl_rxtx_ref;
};
struct ux500_msp_dma_params {