The imx/mxs device tree changes for 3.13:
* Use macros for mxs pinctrl settings * New board support: VF610 Cosmic/Cosmic+, imx6q-udoo, MSR M28CU3 * Support DSPI device for vf610 * Add PCIe device for imx6qdl * Add UHS pinctrl states for imx6sl and imx6qdl * Display support for APF and imx51-babbage boards * Enable SPI NOR and USB for imx6sl-evk board * Enable LVDS for imx6q-sabrelite and SPDIF for imx6qdl-wandboard * Misc updates on boards: TX28, imx6qdl-wandboard, imx53-qsb etc. * Some random updates on imx51 device tree -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAABAgAGBQJSZJgGAAoJEFBXWFqHsHzOskMIALiVd2Cs/Kl4LBufL5JM7JIz Kh8mW24QmuwoMV0KHGEbzVlZbrIXyQj/8P89AnxaWTBhx9BKTBI1hWPrhCoXEGVQ mxwpPce9WGiabwR0za9BEYnMOWo4E3s3XAb8rVm5I8d95oe42kCK+yJrhnG+2oQE Z6+HRfmVTFcXtETcMwggOjgYdV+CRtXiMgoDFiQ10WSrv/9FI9bbS7fEirqEDzaR 4ZkAKNIjbeMYPi0VBbM7bjXezuPUswENyJQQurbCi/h51vpL/oPxEIJKJI3g8Kpi KLcQu4VAWdzSrrKMdQpVqIcofJLLG5+LJGd7ay8zBGoGgyTtyrAEtwYIjzj/LGE= =Ya6+ -----END PGP SIGNATURE----- Merge tag 'imx-dt-3.13' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt From Shawn Guo: The imx/mxs device tree changes for 3.13: - Use macros for mxs pinctrl settings - New board support: VF610 Cosmic/Cosmic+, imx6q-udoo, MSR M28CU3 - Support DSPI device for vf610 - Add PCIe device for imx6qdl - Add UHS pinctrl states for imx6sl and imx6qdl - Display support for APF and imx51-babbage boards - Enable SPI NOR and USB for imx6sl-evk board - Enable LVDS for imx6q-sabrelite and SPDIF for imx6qdl-wandboard - Misc updates on boards: TX28, imx6qdl-wandboard, imx53-qsb etc. - Some random updates on imx51 device tree * tag 'imx-dt-3.13' of git://git.linaro.org/people/shawnguo/linux-2.6: (44 commits) ARM: imx: imx6sl iomuxc syscon is compatible to imx6q ARM: dts: imx6sl-evk: enable the SPI NOR ARM: dts: imx6sl: add a pinctrl for ECSPI1 ARM: imx27: add missing #pwm-cells property ARM: dts: imx6sl: add pinctrl uhs states for usdhc ARM: dts: imx6qdl-sabresd: Add backlight support for lvds ARM: dts: imx51-babbage: Make DVI and WVGA panel functional ARM: imx27-apf27dev: Add framebuffer support ARM: imx51-apf51dev: Add parallel display support ARM: dts: imx53-qsb: Do not use GPIO1_8 as wakeup source ARM: dts: imx53-qsb: SDHC1 does not have cd-gpios ARM: dts: imx53-qsb: SDHC3 is connected in 8-bit mode ARM: dts: mxs: Add MSR M28CU3 board ARM: dts: imx6qdl-wandboard: Provide phy-reset-gpios ARM: dts: imx6qdl-sabresd: Provide phy-reset-gpios ARM: dts: imx6q-sabrelite: Add ethernet phy reset pin into hog ARM: dts: imx6qdl: add pcie device node ARM: dts: imx6q-udoo: Add initial board support ARM: dts: mxs: Add muxing options for the SSP2 MMC ARM: dts: add initial VF610 Cosmic/Cosmic+ board support ... Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson
commit
0f56438038
|
|
@ -59,16 +59,16 @@ Required subnode-properties:
|
|||
|
||||
Optional subnode-properties:
|
||||
- fsl,drive-strength: Integer.
|
||||
0: 4 mA
|
||||
1: 8 mA
|
||||
2: 12 mA
|
||||
3: 16 mA
|
||||
0: MXS_DRIVE_4mA
|
||||
1: MXS_DRIVE_8mA
|
||||
2: MXS_DRIVE_12mA
|
||||
3: MXS_DRIVE_16mA
|
||||
- fsl,voltage: Integer.
|
||||
0: 1.8 V
|
||||
1: 3.3 V
|
||||
0: MXS_VOLTAGE_LOW - 1.8 V
|
||||
1: MXS_VOLTAGE_HIGH - 3.3 V
|
||||
- fsl,pull-up: Integer.
|
||||
0: Disable the internal pull-up
|
||||
1: Enable the internal pull-up
|
||||
0: MXS_PULL_DISABLE - Disable the internal pull-up
|
||||
1: MXS_PULL_ENABLE - Enable the internal pull-up
|
||||
|
||||
Note that when enabling the pull-up, the internal pad keeper gets disabled.
|
||||
Also, some pins doesn't have a pull up, in that case, setting the fsl,pull-up
|
||||
|
|
@ -85,23 +85,32 @@ pinctrl@80018000 {
|
|||
mmc0_8bit_pins_a: mmc0-8bit@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2000 0x2010 0x2020 0x2030
|
||||
0x2040 0x2050 0x2060 0x2070
|
||||
0x2080 0x2090 0x20a0>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
MX28_PAD_SSP0_DATA0__SSP0_D0
|
||||
MX28_PAD_SSP0_DATA1__SSP0_D1
|
||||
MX28_PAD_SSP0_DATA2__SSP0_D2
|
||||
MX28_PAD_SSP0_DATA3__SSP0_D3
|
||||
MX28_PAD_SSP0_DATA4__SSP0_D4
|
||||
MX28_PAD_SSP0_DATA5__SSP0_D5
|
||||
MX28_PAD_SSP0_DATA6__SSP0_D6
|
||||
MX28_PAD_SSP0_DATA7__SSP0_D7
|
||||
MX28_PAD_SSP0_CMD__SSP0_CMD
|
||||
MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
|
||||
MX28_PAD_SSP0_SCK__SSP0_SCK
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
mmc_cd_cfg: mmc-cd-cfg {
|
||||
fsl,pinmux-ids = <0x2090>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,pinmux-ids = <MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
mmc_sck_cfg: mmc-sck-cfg {
|
||||
fsl,pinmux-ids = <0x20a0>;
|
||||
fsl,drive-strength = <2>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,pinmux-ids = <MX28_PAD_SSP0_SCK__SSP0_SCK>;
|
||||
fsl,drive-strength = <MXS_DRIVE_12mA>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -112,811 +121,7 @@ adjusting the configuration for pins card-detection and clock from what group
|
|||
node mmc0-8bit defines. Only the configuration properties to be adjusted need
|
||||
to be listed in the config nodes.
|
||||
|
||||
Valid values for i.MX28 pinmux-id:
|
||||
|
||||
pinmux id
|
||||
------ --
|
||||
MX28_PAD_GPMI_D00__GPMI_D0 0x0000
|
||||
MX28_PAD_GPMI_D01__GPMI_D1 0x0010
|
||||
MX28_PAD_GPMI_D02__GPMI_D2 0x0020
|
||||
MX28_PAD_GPMI_D03__GPMI_D3 0x0030
|
||||
MX28_PAD_GPMI_D04__GPMI_D4 0x0040
|
||||
MX28_PAD_GPMI_D05__GPMI_D5 0x0050
|
||||
MX28_PAD_GPMI_D06__GPMI_D6 0x0060
|
||||
MX28_PAD_GPMI_D07__GPMI_D7 0x0070
|
||||
MX28_PAD_GPMI_CE0N__GPMI_CE0N 0x0100
|
||||
MX28_PAD_GPMI_CE1N__GPMI_CE1N 0x0110
|
||||
MX28_PAD_GPMI_CE2N__GPMI_CE2N 0x0120
|
||||
MX28_PAD_GPMI_CE3N__GPMI_CE3N 0x0130
|
||||
MX28_PAD_GPMI_RDY0__GPMI_READY0 0x0140
|
||||
MX28_PAD_GPMI_RDY1__GPMI_READY1 0x0150
|
||||
MX28_PAD_GPMI_RDY2__GPMI_READY2 0x0160
|
||||
MX28_PAD_GPMI_RDY3__GPMI_READY3 0x0170
|
||||
MX28_PAD_GPMI_RDN__GPMI_RDN 0x0180
|
||||
MX28_PAD_GPMI_WRN__GPMI_WRN 0x0190
|
||||
MX28_PAD_GPMI_ALE__GPMI_ALE 0x01a0
|
||||
MX28_PAD_GPMI_CLE__GPMI_CLE 0x01b0
|
||||
MX28_PAD_GPMI_RESETN__GPMI_RESETN 0x01c0
|
||||
MX28_PAD_LCD_D00__LCD_D0 0x1000
|
||||
MX28_PAD_LCD_D01__LCD_D1 0x1010
|
||||
MX28_PAD_LCD_D02__LCD_D2 0x1020
|
||||
MX28_PAD_LCD_D03__LCD_D3 0x1030
|
||||
MX28_PAD_LCD_D04__LCD_D4 0x1040
|
||||
MX28_PAD_LCD_D05__LCD_D5 0x1050
|
||||
MX28_PAD_LCD_D06__LCD_D6 0x1060
|
||||
MX28_PAD_LCD_D07__LCD_D7 0x1070
|
||||
MX28_PAD_LCD_D08__LCD_D8 0x1080
|
||||
MX28_PAD_LCD_D09__LCD_D9 0x1090
|
||||
MX28_PAD_LCD_D10__LCD_D10 0x10a0
|
||||
MX28_PAD_LCD_D11__LCD_D11 0x10b0
|
||||
MX28_PAD_LCD_D12__LCD_D12 0x10c0
|
||||
MX28_PAD_LCD_D13__LCD_D13 0x10d0
|
||||
MX28_PAD_LCD_D14__LCD_D14 0x10e0
|
||||
MX28_PAD_LCD_D15__LCD_D15 0x10f0
|
||||
MX28_PAD_LCD_D16__LCD_D16 0x1100
|
||||
MX28_PAD_LCD_D17__LCD_D17 0x1110
|
||||
MX28_PAD_LCD_D18__LCD_D18 0x1120
|
||||
MX28_PAD_LCD_D19__LCD_D19 0x1130
|
||||
MX28_PAD_LCD_D20__LCD_D20 0x1140
|
||||
MX28_PAD_LCD_D21__LCD_D21 0x1150
|
||||
MX28_PAD_LCD_D22__LCD_D22 0x1160
|
||||
MX28_PAD_LCD_D23__LCD_D23 0x1170
|
||||
MX28_PAD_LCD_RD_E__LCD_RD_E 0x1180
|
||||
MX28_PAD_LCD_WR_RWN__LCD_WR_RWN 0x1190
|
||||
MX28_PAD_LCD_RS__LCD_RS 0x11a0
|
||||
MX28_PAD_LCD_CS__LCD_CS 0x11b0
|
||||
MX28_PAD_LCD_VSYNC__LCD_VSYNC 0x11c0
|
||||
MX28_PAD_LCD_HSYNC__LCD_HSYNC 0x11d0
|
||||
MX28_PAD_LCD_DOTCLK__LCD_DOTCLK 0x11e0
|
||||
MX28_PAD_LCD_ENABLE__LCD_ENABLE 0x11f0
|
||||
MX28_PAD_SSP0_DATA0__SSP0_D0 0x2000
|
||||
MX28_PAD_SSP0_DATA1__SSP0_D1 0x2010
|
||||
MX28_PAD_SSP0_DATA2__SSP0_D2 0x2020
|
||||
MX28_PAD_SSP0_DATA3__SSP0_D3 0x2030
|
||||
MX28_PAD_SSP0_DATA4__SSP0_D4 0x2040
|
||||
MX28_PAD_SSP0_DATA5__SSP0_D5 0x2050
|
||||
MX28_PAD_SSP0_DATA6__SSP0_D6 0x2060
|
||||
MX28_PAD_SSP0_DATA7__SSP0_D7 0x2070
|
||||
MX28_PAD_SSP0_CMD__SSP0_CMD 0x2080
|
||||
MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT 0x2090
|
||||
MX28_PAD_SSP0_SCK__SSP0_SCK 0x20a0
|
||||
MX28_PAD_SSP1_SCK__SSP1_SCK 0x20c0
|
||||
MX28_PAD_SSP1_CMD__SSP1_CMD 0x20d0
|
||||
MX28_PAD_SSP1_DATA0__SSP1_D0 0x20e0
|
||||
MX28_PAD_SSP1_DATA3__SSP1_D3 0x20f0
|
||||
MX28_PAD_SSP2_SCK__SSP2_SCK 0x2100
|
||||
MX28_PAD_SSP2_MOSI__SSP2_CMD 0x2110
|
||||
MX28_PAD_SSP2_MISO__SSP2_D0 0x2120
|
||||
MX28_PAD_SSP2_SS0__SSP2_D3 0x2130
|
||||
MX28_PAD_SSP2_SS1__SSP2_D4 0x2140
|
||||
MX28_PAD_SSP2_SS2__SSP2_D5 0x2150
|
||||
MX28_PAD_SSP3_SCK__SSP3_SCK 0x2180
|
||||
MX28_PAD_SSP3_MOSI__SSP3_CMD 0x2190
|
||||
MX28_PAD_SSP3_MISO__SSP3_D0 0x21a0
|
||||
MX28_PAD_SSP3_SS0__SSP3_D3 0x21b0
|
||||
MX28_PAD_AUART0_RX__AUART0_RX 0x3000
|
||||
MX28_PAD_AUART0_TX__AUART0_TX 0x3010
|
||||
MX28_PAD_AUART0_CTS__AUART0_CTS 0x3020
|
||||
MX28_PAD_AUART0_RTS__AUART0_RTS 0x3030
|
||||
MX28_PAD_AUART1_RX__AUART1_RX 0x3040
|
||||
MX28_PAD_AUART1_TX__AUART1_TX 0x3050
|
||||
MX28_PAD_AUART1_CTS__AUART1_CTS 0x3060
|
||||
MX28_PAD_AUART1_RTS__AUART1_RTS 0x3070
|
||||
MX28_PAD_AUART2_RX__AUART2_RX 0x3080
|
||||
MX28_PAD_AUART2_TX__AUART2_TX 0x3090
|
||||
MX28_PAD_AUART2_CTS__AUART2_CTS 0x30a0
|
||||
MX28_PAD_AUART2_RTS__AUART2_RTS 0x30b0
|
||||
MX28_PAD_AUART3_RX__AUART3_RX 0x30c0
|
||||
MX28_PAD_AUART3_TX__AUART3_TX 0x30d0
|
||||
MX28_PAD_AUART3_CTS__AUART3_CTS 0x30e0
|
||||
MX28_PAD_AUART3_RTS__AUART3_RTS 0x30f0
|
||||
MX28_PAD_PWM0__PWM_0 0x3100
|
||||
MX28_PAD_PWM1__PWM_1 0x3110
|
||||
MX28_PAD_PWM2__PWM_2 0x3120
|
||||
MX28_PAD_SAIF0_MCLK__SAIF0_MCLK 0x3140
|
||||
MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK 0x3150
|
||||
MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK 0x3160
|
||||
MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 0x3170
|
||||
MX28_PAD_I2C0_SCL__I2C0_SCL 0x3180
|
||||
MX28_PAD_I2C0_SDA__I2C0_SDA 0x3190
|
||||
MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 0x31a0
|
||||
MX28_PAD_SPDIF__SPDIF_TX 0x31b0
|
||||
MX28_PAD_PWM3__PWM_3 0x31c0
|
||||
MX28_PAD_PWM4__PWM_4 0x31d0
|
||||
MX28_PAD_LCD_RESET__LCD_RESET 0x31e0
|
||||
MX28_PAD_ENET0_MDC__ENET0_MDC 0x4000
|
||||
MX28_PAD_ENET0_MDIO__ENET0_MDIO 0x4010
|
||||
MX28_PAD_ENET0_RX_EN__ENET0_RX_EN 0x4020
|
||||
MX28_PAD_ENET0_RXD0__ENET0_RXD0 0x4030
|
||||
MX28_PAD_ENET0_RXD1__ENET0_RXD1 0x4040
|
||||
MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK 0x4050
|
||||
MX28_PAD_ENET0_TX_EN__ENET0_TX_EN 0x4060
|
||||
MX28_PAD_ENET0_TXD0__ENET0_TXD0 0x4070
|
||||
MX28_PAD_ENET0_TXD1__ENET0_TXD1 0x4080
|
||||
MX28_PAD_ENET0_RXD2__ENET0_RXD2 0x4090
|
||||
MX28_PAD_ENET0_RXD3__ENET0_RXD3 0x40a0
|
||||
MX28_PAD_ENET0_TXD2__ENET0_TXD2 0x40b0
|
||||
MX28_PAD_ENET0_TXD3__ENET0_TXD3 0x40c0
|
||||
MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK 0x40d0
|
||||
MX28_PAD_ENET0_COL__ENET0_COL 0x40e0
|
||||
MX28_PAD_ENET0_CRS__ENET0_CRS 0x40f0
|
||||
MX28_PAD_ENET_CLK__CLKCTRL_ENET 0x4100
|
||||
MX28_PAD_JTAG_RTCK__JTAG_RTCK 0x4140
|
||||
MX28_PAD_EMI_D00__EMI_DATA0 0x5000
|
||||
MX28_PAD_EMI_D01__EMI_DATA1 0x5010
|
||||
MX28_PAD_EMI_D02__EMI_DATA2 0x5020
|
||||
MX28_PAD_EMI_D03__EMI_DATA3 0x5030
|
||||
MX28_PAD_EMI_D04__EMI_DATA4 0x5040
|
||||
MX28_PAD_EMI_D05__EMI_DATA5 0x5050
|
||||
MX28_PAD_EMI_D06__EMI_DATA6 0x5060
|
||||
MX28_PAD_EMI_D07__EMI_DATA7 0x5070
|
||||
MX28_PAD_EMI_D08__EMI_DATA8 0x5080
|
||||
MX28_PAD_EMI_D09__EMI_DATA9 0x5090
|
||||
MX28_PAD_EMI_D10__EMI_DATA10 0x50a0
|
||||
MX28_PAD_EMI_D11__EMI_DATA11 0x50b0
|
||||
MX28_PAD_EMI_D12__EMI_DATA12 0x50c0
|
||||
MX28_PAD_EMI_D13__EMI_DATA13 0x50d0
|
||||
MX28_PAD_EMI_D14__EMI_DATA14 0x50e0
|
||||
MX28_PAD_EMI_D15__EMI_DATA15 0x50f0
|
||||
MX28_PAD_EMI_ODT0__EMI_ODT0 0x5100
|
||||
MX28_PAD_EMI_DQM0__EMI_DQM0 0x5110
|
||||
MX28_PAD_EMI_ODT1__EMI_ODT1 0x5120
|
||||
MX28_PAD_EMI_DQM1__EMI_DQM1 0x5130
|
||||
MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK 0x5140
|
||||
MX28_PAD_EMI_CLK__EMI_CLK 0x5150
|
||||
MX28_PAD_EMI_DQS0__EMI_DQS0 0x5160
|
||||
MX28_PAD_EMI_DQS1__EMI_DQS1 0x5170
|
||||
MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN 0x51a0
|
||||
MX28_PAD_EMI_A00__EMI_ADDR0 0x6000
|
||||
MX28_PAD_EMI_A01__EMI_ADDR1 0x6010
|
||||
MX28_PAD_EMI_A02__EMI_ADDR2 0x6020
|
||||
MX28_PAD_EMI_A03__EMI_ADDR3 0x6030
|
||||
MX28_PAD_EMI_A04__EMI_ADDR4 0x6040
|
||||
MX28_PAD_EMI_A05__EMI_ADDR5 0x6050
|
||||
MX28_PAD_EMI_A06__EMI_ADDR6 0x6060
|
||||
MX28_PAD_EMI_A07__EMI_ADDR7 0x6070
|
||||
MX28_PAD_EMI_A08__EMI_ADDR8 0x6080
|
||||
MX28_PAD_EMI_A09__EMI_ADDR9 0x6090
|
||||
MX28_PAD_EMI_A10__EMI_ADDR10 0x60a0
|
||||
MX28_PAD_EMI_A11__EMI_ADDR11 0x60b0
|
||||
MX28_PAD_EMI_A12__EMI_ADDR12 0x60c0
|
||||
MX28_PAD_EMI_A13__EMI_ADDR13 0x60d0
|
||||
MX28_PAD_EMI_A14__EMI_ADDR14 0x60e0
|
||||
MX28_PAD_EMI_BA0__EMI_BA0 0x6100
|
||||
MX28_PAD_EMI_BA1__EMI_BA1 0x6110
|
||||
MX28_PAD_EMI_BA2__EMI_BA2 0x6120
|
||||
MX28_PAD_EMI_CASN__EMI_CASN 0x6130
|
||||
MX28_PAD_EMI_RASN__EMI_RASN 0x6140
|
||||
MX28_PAD_EMI_WEN__EMI_WEN 0x6150
|
||||
MX28_PAD_EMI_CE0N__EMI_CE0N 0x6160
|
||||
MX28_PAD_EMI_CE1N__EMI_CE1N 0x6170
|
||||
MX28_PAD_EMI_CKE__EMI_CKE 0x6180
|
||||
MX28_PAD_GPMI_D00__SSP1_D0 0x0001
|
||||
MX28_PAD_GPMI_D01__SSP1_D1 0x0011
|
||||
MX28_PAD_GPMI_D02__SSP1_D2 0x0021
|
||||
MX28_PAD_GPMI_D03__SSP1_D3 0x0031
|
||||
MX28_PAD_GPMI_D04__SSP1_D4 0x0041
|
||||
MX28_PAD_GPMI_D05__SSP1_D5 0x0051
|
||||
MX28_PAD_GPMI_D06__SSP1_D6 0x0061
|
||||
MX28_PAD_GPMI_D07__SSP1_D7 0x0071
|
||||
MX28_PAD_GPMI_CE0N__SSP3_D0 0x0101
|
||||
MX28_PAD_GPMI_CE1N__SSP3_D3 0x0111
|
||||
MX28_PAD_GPMI_CE2N__CAN1_TX 0x0121
|
||||
MX28_PAD_GPMI_CE3N__CAN1_RX 0x0131
|
||||
MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT 0x0141
|
||||
MX28_PAD_GPMI_RDY1__SSP1_CMD 0x0151
|
||||
MX28_PAD_GPMI_RDY2__CAN0_TX 0x0161
|
||||
MX28_PAD_GPMI_RDY3__CAN0_RX 0x0171
|
||||
MX28_PAD_GPMI_RDN__SSP3_SCK 0x0181
|
||||
MX28_PAD_GPMI_WRN__SSP1_SCK 0x0191
|
||||
MX28_PAD_GPMI_ALE__SSP3_D1 0x01a1
|
||||
MX28_PAD_GPMI_CLE__SSP3_D2 0x01b1
|
||||
MX28_PAD_GPMI_RESETN__SSP3_CMD 0x01c1
|
||||
MX28_PAD_LCD_D03__ETM_DA8 0x1031
|
||||
MX28_PAD_LCD_D04__ETM_DA9 0x1041
|
||||
MX28_PAD_LCD_D08__ETM_DA3 0x1081
|
||||
MX28_PAD_LCD_D09__ETM_DA4 0x1091
|
||||
MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT 0x1141
|
||||
MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN 0x1151
|
||||
MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT 0x1161
|
||||
MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN 0x1171
|
||||
MX28_PAD_LCD_RD_E__LCD_VSYNC 0x1181
|
||||
MX28_PAD_LCD_WR_RWN__LCD_HSYNC 0x1191
|
||||
MX28_PAD_LCD_RS__LCD_DOTCLK 0x11a1
|
||||
MX28_PAD_LCD_CS__LCD_ENABLE 0x11b1
|
||||
MX28_PAD_LCD_VSYNC__SAIF1_SDATA0 0x11c1
|
||||
MX28_PAD_LCD_HSYNC__SAIF1_SDATA1 0x11d1
|
||||
MX28_PAD_LCD_DOTCLK__SAIF1_MCLK 0x11e1
|
||||
MX28_PAD_SSP0_DATA4__SSP2_D0 0x2041
|
||||
MX28_PAD_SSP0_DATA5__SSP2_D3 0x2051
|
||||
MX28_PAD_SSP0_DATA6__SSP2_CMD 0x2061
|
||||
MX28_PAD_SSP0_DATA7__SSP2_SCK 0x2071
|
||||
MX28_PAD_SSP1_SCK__SSP2_D1 0x20c1
|
||||
MX28_PAD_SSP1_CMD__SSP2_D2 0x20d1
|
||||
MX28_PAD_SSP1_DATA0__SSP2_D6 0x20e1
|
||||
MX28_PAD_SSP1_DATA3__SSP2_D7 0x20f1
|
||||
MX28_PAD_SSP2_SCK__AUART2_RX 0x2101
|
||||
MX28_PAD_SSP2_MOSI__AUART2_TX 0x2111
|
||||
MX28_PAD_SSP2_MISO__AUART3_RX 0x2121
|
||||
MX28_PAD_SSP2_SS0__AUART3_TX 0x2131
|
||||
MX28_PAD_SSP2_SS1__SSP2_D1 0x2141
|
||||
MX28_PAD_SSP2_SS2__SSP2_D2 0x2151
|
||||
MX28_PAD_SSP3_SCK__AUART4_TX 0x2181
|
||||
MX28_PAD_SSP3_MOSI__AUART4_RX 0x2191
|
||||
MX28_PAD_SSP3_MISO__AUART4_RTS 0x21a1
|
||||
MX28_PAD_SSP3_SS0__AUART4_CTS 0x21b1
|
||||
MX28_PAD_AUART0_RX__I2C0_SCL 0x3001
|
||||
MX28_PAD_AUART0_TX__I2C0_SDA 0x3011
|
||||
MX28_PAD_AUART0_CTS__AUART4_RX 0x3021
|
||||
MX28_PAD_AUART0_RTS__AUART4_TX 0x3031
|
||||
MX28_PAD_AUART1_RX__SSP2_CARD_DETECT 0x3041
|
||||
MX28_PAD_AUART1_TX__SSP3_CARD_DETECT 0x3051
|
||||
MX28_PAD_AUART1_CTS__USB0_OVERCURRENT 0x3061
|
||||
MX28_PAD_AUART1_RTS__USB0_ID 0x3071
|
||||
MX28_PAD_AUART2_RX__SSP3_D1 0x3081
|
||||
MX28_PAD_AUART2_TX__SSP3_D2 0x3091
|
||||
MX28_PAD_AUART2_CTS__I2C1_SCL 0x30a1
|
||||
MX28_PAD_AUART2_RTS__I2C1_SDA 0x30b1
|
||||
MX28_PAD_AUART3_RX__CAN0_TX 0x30c1
|
||||
MX28_PAD_AUART3_TX__CAN0_RX 0x30d1
|
||||
MX28_PAD_AUART3_CTS__CAN1_TX 0x30e1
|
||||
MX28_PAD_AUART3_RTS__CAN1_RX 0x30f1
|
||||
MX28_PAD_PWM0__I2C1_SCL 0x3101
|
||||
MX28_PAD_PWM1__I2C1_SDA 0x3111
|
||||
MX28_PAD_PWM2__USB0_ID 0x3121
|
||||
MX28_PAD_SAIF0_MCLK__PWM_3 0x3141
|
||||
MX28_PAD_SAIF0_LRCLK__PWM_4 0x3151
|
||||
MX28_PAD_SAIF0_BITCLK__PWM_5 0x3161
|
||||
MX28_PAD_SAIF0_SDATA0__PWM_6 0x3171
|
||||
MX28_PAD_I2C0_SCL__TIMROT_ROTARYA 0x3181
|
||||
MX28_PAD_I2C0_SDA__TIMROT_ROTARYB 0x3191
|
||||
MX28_PAD_SAIF1_SDATA0__PWM_7 0x31a1
|
||||
MX28_PAD_LCD_RESET__LCD_VSYNC 0x31e1
|
||||
MX28_PAD_ENET0_MDC__GPMI_CE4N 0x4001
|
||||
MX28_PAD_ENET0_MDIO__GPMI_CE5N 0x4011
|
||||
MX28_PAD_ENET0_RX_EN__GPMI_CE6N 0x4021
|
||||
MX28_PAD_ENET0_RXD0__GPMI_CE7N 0x4031
|
||||
MX28_PAD_ENET0_RXD1__GPMI_READY4 0x4041
|
||||
MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER 0x4051
|
||||
MX28_PAD_ENET0_TX_EN__GPMI_READY5 0x4061
|
||||
MX28_PAD_ENET0_TXD0__GPMI_READY6 0x4071
|
||||
MX28_PAD_ENET0_TXD1__GPMI_READY7 0x4081
|
||||
MX28_PAD_ENET0_RXD2__ENET1_RXD0 0x4091
|
||||
MX28_PAD_ENET0_RXD3__ENET1_RXD1 0x40a1
|
||||
MX28_PAD_ENET0_TXD2__ENET1_TXD0 0x40b1
|
||||
MX28_PAD_ENET0_TXD3__ENET1_TXD1 0x40c1
|
||||
MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER 0x40d1
|
||||
MX28_PAD_ENET0_COL__ENET1_TX_EN 0x40e1
|
||||
MX28_PAD_ENET0_CRS__ENET1_RX_EN 0x40f1
|
||||
MX28_PAD_GPMI_CE2N__ENET0_RX_ER 0x0122
|
||||
MX28_PAD_GPMI_CE3N__SAIF1_MCLK 0x0132
|
||||
MX28_PAD_GPMI_RDY0__USB0_ID 0x0142
|
||||
MX28_PAD_GPMI_RDY2__ENET0_TX_ER 0x0162
|
||||
MX28_PAD_GPMI_RDY3__HSADC_TRIGGER 0x0172
|
||||
MX28_PAD_GPMI_ALE__SSP3_D4 0x01a2
|
||||
MX28_PAD_GPMI_CLE__SSP3_D5 0x01b2
|
||||
MX28_PAD_LCD_D00__ETM_DA0 0x1002
|
||||
MX28_PAD_LCD_D01__ETM_DA1 0x1012
|
||||
MX28_PAD_LCD_D02__ETM_DA2 0x1022
|
||||
MX28_PAD_LCD_D03__ETM_DA3 0x1032
|
||||
MX28_PAD_LCD_D04__ETM_DA4 0x1042
|
||||
MX28_PAD_LCD_D05__ETM_DA5 0x1052
|
||||
MX28_PAD_LCD_D06__ETM_DA6 0x1062
|
||||
MX28_PAD_LCD_D07__ETM_DA7 0x1072
|
||||
MX28_PAD_LCD_D08__ETM_DA8 0x1082
|
||||
MX28_PAD_LCD_D09__ETM_DA9 0x1092
|
||||
MX28_PAD_LCD_D10__ETM_DA10 0x10a2
|
||||
MX28_PAD_LCD_D11__ETM_DA11 0x10b2
|
||||
MX28_PAD_LCD_D12__ETM_DA12 0x10c2
|
||||
MX28_PAD_LCD_D13__ETM_DA13 0x10d2
|
||||
MX28_PAD_LCD_D14__ETM_DA14 0x10e2
|
||||
MX28_PAD_LCD_D15__ETM_DA15 0x10f2
|
||||
MX28_PAD_LCD_D16__ETM_DA7 0x1102
|
||||
MX28_PAD_LCD_D17__ETM_DA6 0x1112
|
||||
MX28_PAD_LCD_D18__ETM_DA5 0x1122
|
||||
MX28_PAD_LCD_D19__ETM_DA4 0x1132
|
||||
MX28_PAD_LCD_D20__ETM_DA3 0x1142
|
||||
MX28_PAD_LCD_D21__ETM_DA2 0x1152
|
||||
MX28_PAD_LCD_D22__ETM_DA1 0x1162
|
||||
MX28_PAD_LCD_D23__ETM_DA0 0x1172
|
||||
MX28_PAD_LCD_RD_E__ETM_TCTL 0x1182
|
||||
MX28_PAD_LCD_WR_RWN__ETM_TCLK 0x1192
|
||||
MX28_PAD_LCD_HSYNC__ETM_TCTL 0x11d2
|
||||
MX28_PAD_LCD_DOTCLK__ETM_TCLK 0x11e2
|
||||
MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT 0x20c2
|
||||
MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN 0x20d2
|
||||
MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT 0x20e2
|
||||
MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN 0x20f2
|
||||
MX28_PAD_SSP2_SCK__SAIF0_SDATA1 0x2102
|
||||
MX28_PAD_SSP2_MOSI__SAIF0_SDATA2 0x2112
|
||||
MX28_PAD_SSP2_MISO__SAIF1_SDATA1 0x2122
|
||||
MX28_PAD_SSP2_SS0__SAIF1_SDATA2 0x2132
|
||||
MX28_PAD_SSP2_SS1__USB1_OVERCURRENT 0x2142
|
||||
MX28_PAD_SSP2_SS2__USB0_OVERCURRENT 0x2152
|
||||
MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT 0x2182
|
||||
MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN 0x2192
|
||||
MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT 0x21a2
|
||||
MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN 0x21b2
|
||||
MX28_PAD_AUART0_RX__DUART_CTS 0x3002
|
||||
MX28_PAD_AUART0_TX__DUART_RTS 0x3012
|
||||
MX28_PAD_AUART0_CTS__DUART_RX 0x3022
|
||||
MX28_PAD_AUART0_RTS__DUART_TX 0x3032
|
||||
MX28_PAD_AUART1_RX__PWM_0 0x3042
|
||||
MX28_PAD_AUART1_TX__PWM_1 0x3052
|
||||
MX28_PAD_AUART1_CTS__TIMROT_ROTARYA 0x3062
|
||||
MX28_PAD_AUART1_RTS__TIMROT_ROTARYB 0x3072
|
||||
MX28_PAD_AUART2_RX__SSP3_D4 0x3082
|
||||
MX28_PAD_AUART2_TX__SSP3_D5 0x3092
|
||||
MX28_PAD_AUART2_CTS__SAIF1_BITCLK 0x30a2
|
||||
MX28_PAD_AUART2_RTS__SAIF1_LRCLK 0x30b2
|
||||
MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT 0x30c2
|
||||
MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN 0x30d2
|
||||
MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT 0x30e2
|
||||
MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN 0x30f2
|
||||
MX28_PAD_PWM0__DUART_RX 0x3102
|
||||
MX28_PAD_PWM1__DUART_TX 0x3112
|
||||
MX28_PAD_PWM2__USB1_OVERCURRENT 0x3122
|
||||
MX28_PAD_SAIF0_MCLK__AUART4_CTS 0x3142
|
||||
MX28_PAD_SAIF0_LRCLK__AUART4_RTS 0x3152
|
||||
MX28_PAD_SAIF0_BITCLK__AUART4_RX 0x3162
|
||||
MX28_PAD_SAIF0_SDATA0__AUART4_TX 0x3172
|
||||
MX28_PAD_I2C0_SCL__DUART_RX 0x3182
|
||||
MX28_PAD_I2C0_SDA__DUART_TX 0x3192
|
||||
MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1 0x31a2
|
||||
MX28_PAD_SPDIF__ENET1_RX_ER 0x31b2
|
||||
MX28_PAD_ENET0_MDC__SAIF0_SDATA1 0x4002
|
||||
MX28_PAD_ENET0_MDIO__SAIF0_SDATA2 0x4012
|
||||
MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1 0x4022
|
||||
MX28_PAD_ENET0_RXD0__SAIF1_SDATA2 0x4032
|
||||
MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT 0x4052
|
||||
MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT 0x4092
|
||||
MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN 0x40a2
|
||||
MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT 0x40b2
|
||||
MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN 0x40c2
|
||||
MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN 0x40d2
|
||||
MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT 0x40e2
|
||||
MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN 0x40f2
|
||||
MX28_PAD_GPMI_D00__GPIO_0_0 0x0003
|
||||
MX28_PAD_GPMI_D01__GPIO_0_1 0x0013
|
||||
MX28_PAD_GPMI_D02__GPIO_0_2 0x0023
|
||||
MX28_PAD_GPMI_D03__GPIO_0_3 0x0033
|
||||
MX28_PAD_GPMI_D04__GPIO_0_4 0x0043
|
||||
MX28_PAD_GPMI_D05__GPIO_0_5 0x0053
|
||||
MX28_PAD_GPMI_D06__GPIO_0_6 0x0063
|
||||
MX28_PAD_GPMI_D07__GPIO_0_7 0x0073
|
||||
MX28_PAD_GPMI_CE0N__GPIO_0_16 0x0103
|
||||
MX28_PAD_GPMI_CE1N__GPIO_0_17 0x0113
|
||||
MX28_PAD_GPMI_CE2N__GPIO_0_18 0x0123
|
||||
MX28_PAD_GPMI_CE3N__GPIO_0_19 0x0133
|
||||
MX28_PAD_GPMI_RDY0__GPIO_0_20 0x0143
|
||||
MX28_PAD_GPMI_RDY1__GPIO_0_21 0x0153
|
||||
MX28_PAD_GPMI_RDY2__GPIO_0_22 0x0163
|
||||
MX28_PAD_GPMI_RDY3__GPIO_0_23 0x0173
|
||||
MX28_PAD_GPMI_RDN__GPIO_0_24 0x0183
|
||||
MX28_PAD_GPMI_WRN__GPIO_0_25 0x0193
|
||||
MX28_PAD_GPMI_ALE__GPIO_0_26 0x01a3
|
||||
MX28_PAD_GPMI_CLE__GPIO_0_27 0x01b3
|
||||
MX28_PAD_GPMI_RESETN__GPIO_0_28 0x01c3
|
||||
MX28_PAD_LCD_D00__GPIO_1_0 0x1003
|
||||
MX28_PAD_LCD_D01__GPIO_1_1 0x1013
|
||||
MX28_PAD_LCD_D02__GPIO_1_2 0x1023
|
||||
MX28_PAD_LCD_D03__GPIO_1_3 0x1033
|
||||
MX28_PAD_LCD_D04__GPIO_1_4 0x1043
|
||||
MX28_PAD_LCD_D05__GPIO_1_5 0x1053
|
||||
MX28_PAD_LCD_D06__GPIO_1_6 0x1063
|
||||
MX28_PAD_LCD_D07__GPIO_1_7 0x1073
|
||||
MX28_PAD_LCD_D08__GPIO_1_8 0x1083
|
||||
MX28_PAD_LCD_D09__GPIO_1_9 0x1093
|
||||
MX28_PAD_LCD_D10__GPIO_1_10 0x10a3
|
||||
MX28_PAD_LCD_D11__GPIO_1_11 0x10b3
|
||||
MX28_PAD_LCD_D12__GPIO_1_12 0x10c3
|
||||
MX28_PAD_LCD_D13__GPIO_1_13 0x10d3
|
||||
MX28_PAD_LCD_D14__GPIO_1_14 0x10e3
|
||||
MX28_PAD_LCD_D15__GPIO_1_15 0x10f3
|
||||
MX28_PAD_LCD_D16__GPIO_1_16 0x1103
|
||||
MX28_PAD_LCD_D17__GPIO_1_17 0x1113
|
||||
MX28_PAD_LCD_D18__GPIO_1_18 0x1123
|
||||
MX28_PAD_LCD_D19__GPIO_1_19 0x1133
|
||||
MX28_PAD_LCD_D20__GPIO_1_20 0x1143
|
||||
MX28_PAD_LCD_D21__GPIO_1_21 0x1153
|
||||
MX28_PAD_LCD_D22__GPIO_1_22 0x1163
|
||||
MX28_PAD_LCD_D23__GPIO_1_23 0x1173
|
||||
MX28_PAD_LCD_RD_E__GPIO_1_24 0x1183
|
||||
MX28_PAD_LCD_WR_RWN__GPIO_1_25 0x1193
|
||||
MX28_PAD_LCD_RS__GPIO_1_26 0x11a3
|
||||
MX28_PAD_LCD_CS__GPIO_1_27 0x11b3
|
||||
MX28_PAD_LCD_VSYNC__GPIO_1_28 0x11c3
|
||||
MX28_PAD_LCD_HSYNC__GPIO_1_29 0x11d3
|
||||
MX28_PAD_LCD_DOTCLK__GPIO_1_30 0x11e3
|
||||
MX28_PAD_LCD_ENABLE__GPIO_1_31 0x11f3
|
||||
MX28_PAD_SSP0_DATA0__GPIO_2_0 0x2003
|
||||
MX28_PAD_SSP0_DATA1__GPIO_2_1 0x2013
|
||||
MX28_PAD_SSP0_DATA2__GPIO_2_2 0x2023
|
||||
MX28_PAD_SSP0_DATA3__GPIO_2_3 0x2033
|
||||
MX28_PAD_SSP0_DATA4__GPIO_2_4 0x2043
|
||||
MX28_PAD_SSP0_DATA5__GPIO_2_5 0x2053
|
||||
MX28_PAD_SSP0_DATA6__GPIO_2_6 0x2063
|
||||
MX28_PAD_SSP0_DATA7__GPIO_2_7 0x2073
|
||||
MX28_PAD_SSP0_CMD__GPIO_2_8 0x2083
|
||||
MX28_PAD_SSP0_DETECT__GPIO_2_9 0x2093
|
||||
MX28_PAD_SSP0_SCK__GPIO_2_10 0x20a3
|
||||
MX28_PAD_SSP1_SCK__GPIO_2_12 0x20c3
|
||||
MX28_PAD_SSP1_CMD__GPIO_2_13 0x20d3
|
||||
MX28_PAD_SSP1_DATA0__GPIO_2_14 0x20e3
|
||||
MX28_PAD_SSP1_DATA3__GPIO_2_15 0x20f3
|
||||
MX28_PAD_SSP2_SCK__GPIO_2_16 0x2103
|
||||
MX28_PAD_SSP2_MOSI__GPIO_2_17 0x2113
|
||||
MX28_PAD_SSP2_MISO__GPIO_2_18 0x2123
|
||||
MX28_PAD_SSP2_SS0__GPIO_2_19 0x2133
|
||||
MX28_PAD_SSP2_SS1__GPIO_2_20 0x2143
|
||||
MX28_PAD_SSP2_SS2__GPIO_2_21 0x2153
|
||||
MX28_PAD_SSP3_SCK__GPIO_2_24 0x2183
|
||||
MX28_PAD_SSP3_MOSI__GPIO_2_25 0x2193
|
||||
MX28_PAD_SSP3_MISO__GPIO_2_26 0x21a3
|
||||
MX28_PAD_SSP3_SS0__GPIO_2_27 0x21b3
|
||||
MX28_PAD_AUART0_RX__GPIO_3_0 0x3003
|
||||
MX28_PAD_AUART0_TX__GPIO_3_1 0x3013
|
||||
MX28_PAD_AUART0_CTS__GPIO_3_2 0x3023
|
||||
MX28_PAD_AUART0_RTS__GPIO_3_3 0x3033
|
||||
MX28_PAD_AUART1_RX__GPIO_3_4 0x3043
|
||||
MX28_PAD_AUART1_TX__GPIO_3_5 0x3053
|
||||
MX28_PAD_AUART1_CTS__GPIO_3_6 0x3063
|
||||
MX28_PAD_AUART1_RTS__GPIO_3_7 0x3073
|
||||
MX28_PAD_AUART2_RX__GPIO_3_8 0x3083
|
||||
MX28_PAD_AUART2_TX__GPIO_3_9 0x3093
|
||||
MX28_PAD_AUART2_CTS__GPIO_3_10 0x30a3
|
||||
MX28_PAD_AUART2_RTS__GPIO_3_11 0x30b3
|
||||
MX28_PAD_AUART3_RX__GPIO_3_12 0x30c3
|
||||
MX28_PAD_AUART3_TX__GPIO_3_13 0x30d3
|
||||
MX28_PAD_AUART3_CTS__GPIO_3_14 0x30e3
|
||||
MX28_PAD_AUART3_RTS__GPIO_3_15 0x30f3
|
||||
MX28_PAD_PWM0__GPIO_3_16 0x3103
|
||||
MX28_PAD_PWM1__GPIO_3_17 0x3113
|
||||
MX28_PAD_PWM2__GPIO_3_18 0x3123
|
||||
MX28_PAD_SAIF0_MCLK__GPIO_3_20 0x3143
|
||||
MX28_PAD_SAIF0_LRCLK__GPIO_3_21 0x3153
|
||||
MX28_PAD_SAIF0_BITCLK__GPIO_3_22 0x3163
|
||||
MX28_PAD_SAIF0_SDATA0__GPIO_3_23 0x3173
|
||||
MX28_PAD_I2C0_SCL__GPIO_3_24 0x3183
|
||||
MX28_PAD_I2C0_SDA__GPIO_3_25 0x3193
|
||||
MX28_PAD_SAIF1_SDATA0__GPIO_3_26 0x31a3
|
||||
MX28_PAD_SPDIF__GPIO_3_27 0x31b3
|
||||
MX28_PAD_PWM3__GPIO_3_28 0x31c3
|
||||
MX28_PAD_PWM4__GPIO_3_29 0x31d3
|
||||
MX28_PAD_LCD_RESET__GPIO_3_30 0x31e3
|
||||
MX28_PAD_ENET0_MDC__GPIO_4_0 0x4003
|
||||
MX28_PAD_ENET0_MDIO__GPIO_4_1 0x4013
|
||||
MX28_PAD_ENET0_RX_EN__GPIO_4_2 0x4023
|
||||
MX28_PAD_ENET0_RXD0__GPIO_4_3 0x4033
|
||||
MX28_PAD_ENET0_RXD1__GPIO_4_4 0x4043
|
||||
MX28_PAD_ENET0_TX_CLK__GPIO_4_5 0x4053
|
||||
MX28_PAD_ENET0_TX_EN__GPIO_4_6 0x4063
|
||||
MX28_PAD_ENET0_TXD0__GPIO_4_7 0x4073
|
||||
MX28_PAD_ENET0_TXD1__GPIO_4_8 0x4083
|
||||
MX28_PAD_ENET0_RXD2__GPIO_4_9 0x4093
|
||||
MX28_PAD_ENET0_RXD3__GPIO_4_10 0x40a3
|
||||
MX28_PAD_ENET0_TXD2__GPIO_4_11 0x40b3
|
||||
MX28_PAD_ENET0_TXD3__GPIO_4_12 0x40c3
|
||||
MX28_PAD_ENET0_RX_CLK__GPIO_4_13 0x40d3
|
||||
MX28_PAD_ENET0_COL__GPIO_4_14 0x40e3
|
||||
MX28_PAD_ENET0_CRS__GPIO_4_15 0x40f3
|
||||
MX28_PAD_ENET_CLK__GPIO_4_16 0x4103
|
||||
MX28_PAD_JTAG_RTCK__GPIO_4_20 0x4143
|
||||
|
||||
Valid values for i.MX23 pinmux-id:
|
||||
|
||||
pinmux id
|
||||
------ --
|
||||
MX23_PAD_GPMI_D00__GPMI_D00 0x0000
|
||||
MX23_PAD_GPMI_D01__GPMI_D01 0x0010
|
||||
MX23_PAD_GPMI_D02__GPMI_D02 0x0020
|
||||
MX23_PAD_GPMI_D03__GPMI_D03 0x0030
|
||||
MX23_PAD_GPMI_D04__GPMI_D04 0x0040
|
||||
MX23_PAD_GPMI_D05__GPMI_D05 0x0050
|
||||
MX23_PAD_GPMI_D06__GPMI_D06 0x0060
|
||||
MX23_PAD_GPMI_D07__GPMI_D07 0x0070
|
||||
MX23_PAD_GPMI_D08__GPMI_D08 0x0080
|
||||
MX23_PAD_GPMI_D09__GPMI_D09 0x0090
|
||||
MX23_PAD_GPMI_D10__GPMI_D10 0x00a0
|
||||
MX23_PAD_GPMI_D11__GPMI_D11 0x00b0
|
||||
MX23_PAD_GPMI_D12__GPMI_D12 0x00c0
|
||||
MX23_PAD_GPMI_D13__GPMI_D13 0x00d0
|
||||
MX23_PAD_GPMI_D14__GPMI_D14 0x00e0
|
||||
MX23_PAD_GPMI_D15__GPMI_D15 0x00f0
|
||||
MX23_PAD_GPMI_CLE__GPMI_CLE 0x0100
|
||||
MX23_PAD_GPMI_ALE__GPMI_ALE 0x0110
|
||||
MX23_PAD_GPMI_CE2N__GPMI_CE2N 0x0120
|
||||
MX23_PAD_GPMI_RDY0__GPMI_RDY0 0x0130
|
||||
MX23_PAD_GPMI_RDY1__GPMI_RDY1 0x0140
|
||||
MX23_PAD_GPMI_RDY2__GPMI_RDY2 0x0150
|
||||
MX23_PAD_GPMI_RDY3__GPMI_RDY3 0x0160
|
||||
MX23_PAD_GPMI_WPN__GPMI_WPN 0x0170
|
||||
MX23_PAD_GPMI_WRN__GPMI_WRN 0x0180
|
||||
MX23_PAD_GPMI_RDN__GPMI_RDN 0x0190
|
||||
MX23_PAD_AUART1_CTS__AUART1_CTS 0x01a0
|
||||
MX23_PAD_AUART1_RTS__AUART1_RTS 0x01b0
|
||||
MX23_PAD_AUART1_RX__AUART1_RX 0x01c0
|
||||
MX23_PAD_AUART1_TX__AUART1_TX 0x01d0
|
||||
MX23_PAD_I2C_SCL__I2C_SCL 0x01e0
|
||||
MX23_PAD_I2C_SDA__I2C_SDA 0x01f0
|
||||
MX23_PAD_LCD_D00__LCD_D00 0x1000
|
||||
MX23_PAD_LCD_D01__LCD_D01 0x1010
|
||||
MX23_PAD_LCD_D02__LCD_D02 0x1020
|
||||
MX23_PAD_LCD_D03__LCD_D03 0x1030
|
||||
MX23_PAD_LCD_D04__LCD_D04 0x1040
|
||||
MX23_PAD_LCD_D05__LCD_D05 0x1050
|
||||
MX23_PAD_LCD_D06__LCD_D06 0x1060
|
||||
MX23_PAD_LCD_D07__LCD_D07 0x1070
|
||||
MX23_PAD_LCD_D08__LCD_D08 0x1080
|
||||
MX23_PAD_LCD_D09__LCD_D09 0x1090
|
||||
MX23_PAD_LCD_D10__LCD_D10 0x10a0
|
||||
MX23_PAD_LCD_D11__LCD_D11 0x10b0
|
||||
MX23_PAD_LCD_D12__LCD_D12 0x10c0
|
||||
MX23_PAD_LCD_D13__LCD_D13 0x10d0
|
||||
MX23_PAD_LCD_D14__LCD_D14 0x10e0
|
||||
MX23_PAD_LCD_D15__LCD_D15 0x10f0
|
||||
MX23_PAD_LCD_D16__LCD_D16 0x1100
|
||||
MX23_PAD_LCD_D17__LCD_D17 0x1110
|
||||
MX23_PAD_LCD_RESET__LCD_RESET 0x1120
|
||||
MX23_PAD_LCD_RS__LCD_RS 0x1130
|
||||
MX23_PAD_LCD_WR__LCD_WR 0x1140
|
||||
MX23_PAD_LCD_CS__LCD_CS 0x1150
|
||||
MX23_PAD_LCD_DOTCK__LCD_DOTCK 0x1160
|
||||
MX23_PAD_LCD_ENABLE__LCD_ENABLE 0x1170
|
||||
MX23_PAD_LCD_HSYNC__LCD_HSYNC 0x1180
|
||||
MX23_PAD_LCD_VSYNC__LCD_VSYNC 0x1190
|
||||
MX23_PAD_PWM0__PWM0 0x11a0
|
||||
MX23_PAD_PWM1__PWM1 0x11b0
|
||||
MX23_PAD_PWM2__PWM2 0x11c0
|
||||
MX23_PAD_PWM3__PWM3 0x11d0
|
||||
MX23_PAD_PWM4__PWM4 0x11e0
|
||||
MX23_PAD_SSP1_CMD__SSP1_CMD 0x2000
|
||||
MX23_PAD_SSP1_DETECT__SSP1_DETECT 0x2010
|
||||
MX23_PAD_SSP1_DATA0__SSP1_DATA0 0x2020
|
||||
MX23_PAD_SSP1_DATA1__SSP1_DATA1 0x2030
|
||||
MX23_PAD_SSP1_DATA2__SSP1_DATA2 0x2040
|
||||
MX23_PAD_SSP1_DATA3__SSP1_DATA3 0x2050
|
||||
MX23_PAD_SSP1_SCK__SSP1_SCK 0x2060
|
||||
MX23_PAD_ROTARYA__ROTARYA 0x2070
|
||||
MX23_PAD_ROTARYB__ROTARYB 0x2080
|
||||
MX23_PAD_EMI_A00__EMI_A00 0x2090
|
||||
MX23_PAD_EMI_A01__EMI_A01 0x20a0
|
||||
MX23_PAD_EMI_A02__EMI_A02 0x20b0
|
||||
MX23_PAD_EMI_A03__EMI_A03 0x20c0
|
||||
MX23_PAD_EMI_A04__EMI_A04 0x20d0
|
||||
MX23_PAD_EMI_A05__EMI_A05 0x20e0
|
||||
MX23_PAD_EMI_A06__EMI_A06 0x20f0
|
||||
MX23_PAD_EMI_A07__EMI_A07 0x2100
|
||||
MX23_PAD_EMI_A08__EMI_A08 0x2110
|
||||
MX23_PAD_EMI_A09__EMI_A09 0x2120
|
||||
MX23_PAD_EMI_A10__EMI_A10 0x2130
|
||||
MX23_PAD_EMI_A11__EMI_A11 0x2140
|
||||
MX23_PAD_EMI_A12__EMI_A12 0x2150
|
||||
MX23_PAD_EMI_BA0__EMI_BA0 0x2160
|
||||
MX23_PAD_EMI_BA1__EMI_BA1 0x2170
|
||||
MX23_PAD_EMI_CASN__EMI_CASN 0x2180
|
||||
MX23_PAD_EMI_CE0N__EMI_CE0N 0x2190
|
||||
MX23_PAD_EMI_CE1N__EMI_CE1N 0x21a0
|
||||
MX23_PAD_GPMI_CE1N__GPMI_CE1N 0x21b0
|
||||
MX23_PAD_GPMI_CE0N__GPMI_CE0N 0x21c0
|
||||
MX23_PAD_EMI_CKE__EMI_CKE 0x21d0
|
||||
MX23_PAD_EMI_RASN__EMI_RASN 0x21e0
|
||||
MX23_PAD_EMI_WEN__EMI_WEN 0x21f0
|
||||
MX23_PAD_EMI_D00__EMI_D00 0x3000
|
||||
MX23_PAD_EMI_D01__EMI_D01 0x3010
|
||||
MX23_PAD_EMI_D02__EMI_D02 0x3020
|
||||
MX23_PAD_EMI_D03__EMI_D03 0x3030
|
||||
MX23_PAD_EMI_D04__EMI_D04 0x3040
|
||||
MX23_PAD_EMI_D05__EMI_D05 0x3050
|
||||
MX23_PAD_EMI_D06__EMI_D06 0x3060
|
||||
MX23_PAD_EMI_D07__EMI_D07 0x3070
|
||||
MX23_PAD_EMI_D08__EMI_D08 0x3080
|
||||
MX23_PAD_EMI_D09__EMI_D09 0x3090
|
||||
MX23_PAD_EMI_D10__EMI_D10 0x30a0
|
||||
MX23_PAD_EMI_D11__EMI_D11 0x30b0
|
||||
MX23_PAD_EMI_D12__EMI_D12 0x30c0
|
||||
MX23_PAD_EMI_D13__EMI_D13 0x30d0
|
||||
MX23_PAD_EMI_D14__EMI_D14 0x30e0
|
||||
MX23_PAD_EMI_D15__EMI_D15 0x30f0
|
||||
MX23_PAD_EMI_DQM0__EMI_DQM0 0x3100
|
||||
MX23_PAD_EMI_DQM1__EMI_DQM1 0x3110
|
||||
MX23_PAD_EMI_DQS0__EMI_DQS0 0x3120
|
||||
MX23_PAD_EMI_DQS1__EMI_DQS1 0x3130
|
||||
MX23_PAD_EMI_CLK__EMI_CLK 0x3140
|
||||
MX23_PAD_EMI_CLKN__EMI_CLKN 0x3150
|
||||
MX23_PAD_GPMI_D00__LCD_D8 0x0001
|
||||
MX23_PAD_GPMI_D01__LCD_D9 0x0011
|
||||
MX23_PAD_GPMI_D02__LCD_D10 0x0021
|
||||
MX23_PAD_GPMI_D03__LCD_D11 0x0031
|
||||
MX23_PAD_GPMI_D04__LCD_D12 0x0041
|
||||
MX23_PAD_GPMI_D05__LCD_D13 0x0051
|
||||
MX23_PAD_GPMI_D06__LCD_D14 0x0061
|
||||
MX23_PAD_GPMI_D07__LCD_D15 0x0071
|
||||
MX23_PAD_GPMI_D08__LCD_D18 0x0081
|
||||
MX23_PAD_GPMI_D09__LCD_D19 0x0091
|
||||
MX23_PAD_GPMI_D10__LCD_D20 0x00a1
|
||||
MX23_PAD_GPMI_D11__LCD_D21 0x00b1
|
||||
MX23_PAD_GPMI_D12__LCD_D22 0x00c1
|
||||
MX23_PAD_GPMI_D13__LCD_D23 0x00d1
|
||||
MX23_PAD_GPMI_D14__AUART2_RX 0x00e1
|
||||
MX23_PAD_GPMI_D15__AUART2_TX 0x00f1
|
||||
MX23_PAD_GPMI_CLE__LCD_D16 0x0101
|
||||
MX23_PAD_GPMI_ALE__LCD_D17 0x0111
|
||||
MX23_PAD_GPMI_CE2N__ATA_A2 0x0121
|
||||
MX23_PAD_AUART1_RTS__IR_CLK 0x01b1
|
||||
MX23_PAD_AUART1_RX__IR_RX 0x01c1
|
||||
MX23_PAD_AUART1_TX__IR_TX 0x01d1
|
||||
MX23_PAD_I2C_SCL__GPMI_RDY2 0x01e1
|
||||
MX23_PAD_I2C_SDA__GPMI_CE2N 0x01f1
|
||||
MX23_PAD_LCD_D00__ETM_DA8 0x1001
|
||||
MX23_PAD_LCD_D01__ETM_DA9 0x1011
|
||||
MX23_PAD_LCD_D02__ETM_DA10 0x1021
|
||||
MX23_PAD_LCD_D03__ETM_DA11 0x1031
|
||||
MX23_PAD_LCD_D04__ETM_DA12 0x1041
|
||||
MX23_PAD_LCD_D05__ETM_DA13 0x1051
|
||||
MX23_PAD_LCD_D06__ETM_DA14 0x1061
|
||||
MX23_PAD_LCD_D07__ETM_DA15 0x1071
|
||||
MX23_PAD_LCD_D08__ETM_DA0 0x1081
|
||||
MX23_PAD_LCD_D09__ETM_DA1 0x1091
|
||||
MX23_PAD_LCD_D10__ETM_DA2 0x10a1
|
||||
MX23_PAD_LCD_D11__ETM_DA3 0x10b1
|
||||
MX23_PAD_LCD_D12__ETM_DA4 0x10c1
|
||||
MX23_PAD_LCD_D13__ETM_DA5 0x10d1
|
||||
MX23_PAD_LCD_D14__ETM_DA6 0x10e1
|
||||
MX23_PAD_LCD_D15__ETM_DA7 0x10f1
|
||||
MX23_PAD_LCD_RESET__ETM_TCTL 0x1121
|
||||
MX23_PAD_LCD_RS__ETM_TCLK 0x1131
|
||||
MX23_PAD_LCD_DOTCK__GPMI_RDY3 0x1161
|
||||
MX23_PAD_LCD_ENABLE__I2C_SCL 0x1171
|
||||
MX23_PAD_LCD_HSYNC__I2C_SDA 0x1181
|
||||
MX23_PAD_LCD_VSYNC__LCD_BUSY 0x1191
|
||||
MX23_PAD_PWM0__ROTARYA 0x11a1
|
||||
MX23_PAD_PWM1__ROTARYB 0x11b1
|
||||
MX23_PAD_PWM2__GPMI_RDY3 0x11c1
|
||||
MX23_PAD_PWM3__ETM_TCTL 0x11d1
|
||||
MX23_PAD_PWM4__ETM_TCLK 0x11e1
|
||||
MX23_PAD_SSP1_DETECT__GPMI_CE3N 0x2011
|
||||
MX23_PAD_SSP1_DATA1__I2C_SCL 0x2031
|
||||
MX23_PAD_SSP1_DATA2__I2C_SDA 0x2041
|
||||
MX23_PAD_ROTARYA__AUART2_RTS 0x2071
|
||||
MX23_PAD_ROTARYB__AUART2_CTS 0x2081
|
||||
MX23_PAD_GPMI_D00__SSP2_DATA0 0x0002
|
||||
MX23_PAD_GPMI_D01__SSP2_DATA1 0x0012
|
||||
MX23_PAD_GPMI_D02__SSP2_DATA2 0x0022
|
||||
MX23_PAD_GPMI_D03__SSP2_DATA3 0x0032
|
||||
MX23_PAD_GPMI_D04__SSP2_DATA4 0x0042
|
||||
MX23_PAD_GPMI_D05__SSP2_DATA5 0x0052
|
||||
MX23_PAD_GPMI_D06__SSP2_DATA6 0x0062
|
||||
MX23_PAD_GPMI_D07__SSP2_DATA7 0x0072
|
||||
MX23_PAD_GPMI_D08__SSP1_DATA4 0x0082
|
||||
MX23_PAD_GPMI_D09__SSP1_DATA5 0x0092
|
||||
MX23_PAD_GPMI_D10__SSP1_DATA6 0x00a2
|
||||
MX23_PAD_GPMI_D11__SSP1_DATA7 0x00b2
|
||||
MX23_PAD_GPMI_D15__GPMI_CE3N 0x00f2
|
||||
MX23_PAD_GPMI_RDY0__SSP2_DETECT 0x0132
|
||||
MX23_PAD_GPMI_RDY1__SSP2_CMD 0x0142
|
||||
MX23_PAD_GPMI_WRN__SSP2_SCK 0x0182
|
||||
MX23_PAD_AUART1_CTS__SSP1_DATA4 0x01a2
|
||||
MX23_PAD_AUART1_RTS__SSP1_DATA5 0x01b2
|
||||
MX23_PAD_AUART1_RX__SSP1_DATA6 0x01c2
|
||||
MX23_PAD_AUART1_TX__SSP1_DATA7 0x01d2
|
||||
MX23_PAD_I2C_SCL__AUART1_TX 0x01e2
|
||||
MX23_PAD_I2C_SDA__AUART1_RX 0x01f2
|
||||
MX23_PAD_LCD_D08__SAIF2_SDATA0 0x1082
|
||||
MX23_PAD_LCD_D09__SAIF1_SDATA0 0x1092
|
||||
MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK 0x10a2
|
||||
MX23_PAD_LCD_D11__SAIF_LRCLK 0x10b2
|
||||
MX23_PAD_LCD_D12__SAIF2_SDATA1 0x10c2
|
||||
MX23_PAD_LCD_D13__SAIF2_SDATA2 0x10d2
|
||||
MX23_PAD_LCD_D14__SAIF1_SDATA2 0x10e2
|
||||
MX23_PAD_LCD_D15__SAIF1_SDATA1 0x10f2
|
||||
MX23_PAD_LCD_D16__SAIF_ALT_BITCLK 0x1102
|
||||
MX23_PAD_LCD_RESET__GPMI_CE3N 0x1122
|
||||
MX23_PAD_PWM0__DUART_RX 0x11a2
|
||||
MX23_PAD_PWM1__DUART_TX 0x11b2
|
||||
MX23_PAD_PWM3__AUART1_CTS 0x11d2
|
||||
MX23_PAD_PWM4__AUART1_RTS 0x11e2
|
||||
MX23_PAD_SSP1_CMD__JTAG_TDO 0x2002
|
||||
MX23_PAD_SSP1_DETECT__USB_OTG_ID 0x2012
|
||||
MX23_PAD_SSP1_DATA0__JTAG_TDI 0x2022
|
||||
MX23_PAD_SSP1_DATA1__JTAG_TCLK 0x2032
|
||||
MX23_PAD_SSP1_DATA2__JTAG_RTCK 0x2042
|
||||
MX23_PAD_SSP1_DATA3__JTAG_TMS 0x2052
|
||||
MX23_PAD_SSP1_SCK__JTAG_TRST 0x2062
|
||||
MX23_PAD_ROTARYA__SPDIF 0x2072
|
||||
MX23_PAD_ROTARYB__GPMI_CE3N 0x2082
|
||||
MX23_PAD_GPMI_D00__GPIO_0_0 0x0003
|
||||
MX23_PAD_GPMI_D01__GPIO_0_1 0x0013
|
||||
MX23_PAD_GPMI_D02__GPIO_0_2 0x0023
|
||||
MX23_PAD_GPMI_D03__GPIO_0_3 0x0033
|
||||
MX23_PAD_GPMI_D04__GPIO_0_4 0x0043
|
||||
MX23_PAD_GPMI_D05__GPIO_0_5 0x0053
|
||||
MX23_PAD_GPMI_D06__GPIO_0_6 0x0063
|
||||
MX23_PAD_GPMI_D07__GPIO_0_7 0x0073
|
||||
MX23_PAD_GPMI_D08__GPIO_0_8 0x0083
|
||||
MX23_PAD_GPMI_D09__GPIO_0_9 0x0093
|
||||
MX23_PAD_GPMI_D10__GPIO_0_10 0x00a3
|
||||
MX23_PAD_GPMI_D11__GPIO_0_11 0x00b3
|
||||
MX23_PAD_GPMI_D12__GPIO_0_12 0x00c3
|
||||
MX23_PAD_GPMI_D13__GPIO_0_13 0x00d3
|
||||
MX23_PAD_GPMI_D14__GPIO_0_14 0x00e3
|
||||
MX23_PAD_GPMI_D15__GPIO_0_15 0x00f3
|
||||
MX23_PAD_GPMI_CLE__GPIO_0_16 0x0103
|
||||
MX23_PAD_GPMI_ALE__GPIO_0_17 0x0113
|
||||
MX23_PAD_GPMI_CE2N__GPIO_0_18 0x0123
|
||||
MX23_PAD_GPMI_RDY0__GPIO_0_19 0x0133
|
||||
MX23_PAD_GPMI_RDY1__GPIO_0_20 0x0143
|
||||
MX23_PAD_GPMI_RDY2__GPIO_0_21 0x0153
|
||||
MX23_PAD_GPMI_RDY3__GPIO_0_22 0x0163
|
||||
MX23_PAD_GPMI_WPN__GPIO_0_23 0x0173
|
||||
MX23_PAD_GPMI_WRN__GPIO_0_24 0x0183
|
||||
MX23_PAD_GPMI_RDN__GPIO_0_25 0x0193
|
||||
MX23_PAD_AUART1_CTS__GPIO_0_26 0x01a3
|
||||
MX23_PAD_AUART1_RTS__GPIO_0_27 0x01b3
|
||||
MX23_PAD_AUART1_RX__GPIO_0_28 0x01c3
|
||||
MX23_PAD_AUART1_TX__GPIO_0_29 0x01d3
|
||||
MX23_PAD_I2C_SCL__GPIO_0_30 0x01e3
|
||||
MX23_PAD_I2C_SDA__GPIO_0_31 0x01f3
|
||||
MX23_PAD_LCD_D00__GPIO_1_0 0x1003
|
||||
MX23_PAD_LCD_D01__GPIO_1_1 0x1013
|
||||
MX23_PAD_LCD_D02__GPIO_1_2 0x1023
|
||||
MX23_PAD_LCD_D03__GPIO_1_3 0x1033
|
||||
MX23_PAD_LCD_D04__GPIO_1_4 0x1043
|
||||
MX23_PAD_LCD_D05__GPIO_1_5 0x1053
|
||||
MX23_PAD_LCD_D06__GPIO_1_6 0x1063
|
||||
MX23_PAD_LCD_D07__GPIO_1_7 0x1073
|
||||
MX23_PAD_LCD_D08__GPIO_1_8 0x1083
|
||||
MX23_PAD_LCD_D09__GPIO_1_9 0x1093
|
||||
MX23_PAD_LCD_D10__GPIO_1_10 0x10a3
|
||||
MX23_PAD_LCD_D11__GPIO_1_11 0x10b3
|
||||
MX23_PAD_LCD_D12__GPIO_1_12 0x10c3
|
||||
MX23_PAD_LCD_D13__GPIO_1_13 0x10d3
|
||||
MX23_PAD_LCD_D14__GPIO_1_14 0x10e3
|
||||
MX23_PAD_LCD_D15__GPIO_1_15 0x10f3
|
||||
MX23_PAD_LCD_D16__GPIO_1_16 0x1103
|
||||
MX23_PAD_LCD_D17__GPIO_1_17 0x1113
|
||||
MX23_PAD_LCD_RESET__GPIO_1_18 0x1123
|
||||
MX23_PAD_LCD_RS__GPIO_1_19 0x1133
|
||||
MX23_PAD_LCD_WR__GPIO_1_20 0x1143
|
||||
MX23_PAD_LCD_CS__GPIO_1_21 0x1153
|
||||
MX23_PAD_LCD_DOTCK__GPIO_1_22 0x1163
|
||||
MX23_PAD_LCD_ENABLE__GPIO_1_23 0x1173
|
||||
MX23_PAD_LCD_HSYNC__GPIO_1_24 0x1183
|
||||
MX23_PAD_LCD_VSYNC__GPIO_1_25 0x1193
|
||||
MX23_PAD_PWM0__GPIO_1_26 0x11a3
|
||||
MX23_PAD_PWM1__GPIO_1_27 0x11b3
|
||||
MX23_PAD_PWM2__GPIO_1_28 0x11c3
|
||||
MX23_PAD_PWM3__GPIO_1_29 0x11d3
|
||||
MX23_PAD_PWM4__GPIO_1_30 0x11e3
|
||||
MX23_PAD_SSP1_CMD__GPIO_2_0 0x2003
|
||||
MX23_PAD_SSP1_DETECT__GPIO_2_1 0x2013
|
||||
MX23_PAD_SSP1_DATA0__GPIO_2_2 0x2023
|
||||
MX23_PAD_SSP1_DATA1__GPIO_2_3 0x2033
|
||||
MX23_PAD_SSP1_DATA2__GPIO_2_4 0x2043
|
||||
MX23_PAD_SSP1_DATA3__GPIO_2_5 0x2053
|
||||
MX23_PAD_SSP1_SCK__GPIO_2_6 0x2063
|
||||
MX23_PAD_ROTARYA__GPIO_2_7 0x2073
|
||||
MX23_PAD_ROTARYB__GPIO_2_8 0x2083
|
||||
MX23_PAD_EMI_A00__GPIO_2_9 0x2093
|
||||
MX23_PAD_EMI_A01__GPIO_2_10 0x20a3
|
||||
MX23_PAD_EMI_A02__GPIO_2_11 0x20b3
|
||||
MX23_PAD_EMI_A03__GPIO_2_12 0x20c3
|
||||
MX23_PAD_EMI_A04__GPIO_2_13 0x20d3
|
||||
MX23_PAD_EMI_A05__GPIO_2_14 0x20e3
|
||||
MX23_PAD_EMI_A06__GPIO_2_15 0x20f3
|
||||
MX23_PAD_EMI_A07__GPIO_2_16 0x2103
|
||||
MX23_PAD_EMI_A08__GPIO_2_17 0x2113
|
||||
MX23_PAD_EMI_A09__GPIO_2_18 0x2123
|
||||
MX23_PAD_EMI_A10__GPIO_2_19 0x2133
|
||||
MX23_PAD_EMI_A11__GPIO_2_20 0x2143
|
||||
MX23_PAD_EMI_A12__GPIO_2_21 0x2153
|
||||
MX23_PAD_EMI_BA0__GPIO_2_22 0x2163
|
||||
MX23_PAD_EMI_BA1__GPIO_2_23 0x2173
|
||||
MX23_PAD_EMI_CASN__GPIO_2_24 0x2183
|
||||
MX23_PAD_EMI_CE0N__GPIO_2_25 0x2193
|
||||
MX23_PAD_EMI_CE1N__GPIO_2_26 0x21a3
|
||||
MX23_PAD_GPMI_CE1N__GPIO_2_27 0x21b3
|
||||
MX23_PAD_GPMI_CE0N__GPIO_2_28 0x21c3
|
||||
MX23_PAD_EMI_CKE__GPIO_2_29 0x21d3
|
||||
MX23_PAD_EMI_RASN__GPIO_2_30 0x21e3
|
||||
MX23_PAD_EMI_WEN__GPIO_2_31 0x21f3
|
||||
Valid values for i.MX28/i.MX23 pinmux-id are defined in
|
||||
arch/arm/boot/dts/imx28-pinfunc.h and arch/arm/boot/dts/imx23-pinfunc.h.
|
||||
The definitions for the padconfig properties can be found in
|
||||
arch/arm/boot/dts/mxs-pinfunc.h.
|
||||
|
|
|
|||
|
|
@ -144,8 +144,10 @@ dtb-$(CONFIG_ARCH_MXC) += \
|
|||
imx6q-sabrelite.dtb \
|
||||
imx6q-sabresd.dtb \
|
||||
imx6q-sbc6x.dtb \
|
||||
imx6q-udoo.dtb \
|
||||
imx6q-wandboard.dtb \
|
||||
imx6sl-evk.dtb \
|
||||
vf610-cosmic.dtb \
|
||||
vf610-twr.dtb
|
||||
dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
|
||||
imx23-olinuxino.dtb \
|
||||
|
|
@ -161,6 +163,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
|
|||
imx28-cfa10057.dtb \
|
||||
imx28-cfa10058.dtb \
|
||||
imx28-evk.dtb \
|
||||
imx28-m28cu3.dtb \
|
||||
imx28-m28evk.dtb \
|
||||
imx28-sps1.dtb \
|
||||
imx28-tx28.dtb
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@
|
|||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "imx23.dtsi"
|
||||
#include "imx23.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Freescale i.MX23 Evaluation Kit";
|
||||
|
|
@ -45,14 +45,14 @@
|
|||
hog_pins_a: hog@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */
|
||||
0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
|
||||
0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
|
||||
0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
|
||||
MX23_PAD_LCD_RESET__GPIO_1_18
|
||||
MX23_PAD_PWM3__GPIO_1_29
|
||||
MX23_PAD_PWM4__GPIO_1_30
|
||||
MX23_PAD_SSP1_DETECT__SSP1_DETECT
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -12,7 +12,7 @@
|
|||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "imx23.dtsi"
|
||||
#include "imx23.dtsi"
|
||||
|
||||
/ {
|
||||
model = "i.MX23 Olinuxino Low Cost Board";
|
||||
|
|
@ -40,21 +40,21 @@
|
|||
hog_pins_a: hog@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
|
||||
MX23_PAD_GPMI_ALE__GPIO_0_17
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
led_pin_gpio2_1: led_gpio2_1@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
|
||||
MX23_PAD_SSP1_DETECT__GPIO_2_1
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,333 @@
|
|||
/*
|
||||
* Header providing constants for i.MX23 pinctrl bindings.
|
||||
*
|
||||
* Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
#ifndef __DT_BINDINGS_MX23_PINCTRL_H__
|
||||
#define __DT_BINDINGS_MX23_PINCTRL_H__
|
||||
|
||||
#include "mxs-pinfunc.h"
|
||||
|
||||
#define MX23_PAD_GPMI_D00__GPMI_D00 0x0000
|
||||
#define MX23_PAD_GPMI_D01__GPMI_D01 0x0010
|
||||
#define MX23_PAD_GPMI_D02__GPMI_D02 0x0020
|
||||
#define MX23_PAD_GPMI_D03__GPMI_D03 0x0030
|
||||
#define MX23_PAD_GPMI_D04__GPMI_D04 0x0040
|
||||
#define MX23_PAD_GPMI_D05__GPMI_D05 0x0050
|
||||
#define MX23_PAD_GPMI_D06__GPMI_D06 0x0060
|
||||
#define MX23_PAD_GPMI_D07__GPMI_D07 0x0070
|
||||
#define MX23_PAD_GPMI_D08__GPMI_D08 0x0080
|
||||
#define MX23_PAD_GPMI_D09__GPMI_D09 0x0090
|
||||
#define MX23_PAD_GPMI_D10__GPMI_D10 0x00a0
|
||||
#define MX23_PAD_GPMI_D11__GPMI_D11 0x00b0
|
||||
#define MX23_PAD_GPMI_D12__GPMI_D12 0x00c0
|
||||
#define MX23_PAD_GPMI_D13__GPMI_D13 0x00d0
|
||||
#define MX23_PAD_GPMI_D14__GPMI_D14 0x00e0
|
||||
#define MX23_PAD_GPMI_D15__GPMI_D15 0x00f0
|
||||
#define MX23_PAD_GPMI_CLE__GPMI_CLE 0x0100
|
||||
#define MX23_PAD_GPMI_ALE__GPMI_ALE 0x0110
|
||||
#define MX23_PAD_GPMI_CE2N__GPMI_CE2N 0x0120
|
||||
#define MX23_PAD_GPMI_RDY0__GPMI_RDY0 0x0130
|
||||
#define MX23_PAD_GPMI_RDY1__GPMI_RDY1 0x0140
|
||||
#define MX23_PAD_GPMI_RDY2__GPMI_RDY2 0x0150
|
||||
#define MX23_PAD_GPMI_RDY3__GPMI_RDY3 0x0160
|
||||
#define MX23_PAD_GPMI_WPN__GPMI_WPN 0x0170
|
||||
#define MX23_PAD_GPMI_WRN__GPMI_WRN 0x0180
|
||||
#define MX23_PAD_GPMI_RDN__GPMI_RDN 0x0190
|
||||
#define MX23_PAD_AUART1_CTS__AUART1_CTS 0x01a0
|
||||
#define MX23_PAD_AUART1_RTS__AUART1_RTS 0x01b0
|
||||
#define MX23_PAD_AUART1_RX__AUART1_RX 0x01c0
|
||||
#define MX23_PAD_AUART1_TX__AUART1_TX 0x01d0
|
||||
#define MX23_PAD_I2C_SCL__I2C_SCL 0x01e0
|
||||
#define MX23_PAD_I2C_SDA__I2C_SDA 0x01f0
|
||||
#define MX23_PAD_LCD_D00__LCD_D00 0x1000
|
||||
#define MX23_PAD_LCD_D01__LCD_D01 0x1010
|
||||
#define MX23_PAD_LCD_D02__LCD_D02 0x1020
|
||||
#define MX23_PAD_LCD_D03__LCD_D03 0x1030
|
||||
#define MX23_PAD_LCD_D04__LCD_D04 0x1040
|
||||
#define MX23_PAD_LCD_D05__LCD_D05 0x1050
|
||||
#define MX23_PAD_LCD_D06__LCD_D06 0x1060
|
||||
#define MX23_PAD_LCD_D07__LCD_D07 0x1070
|
||||
#define MX23_PAD_LCD_D08__LCD_D08 0x1080
|
||||
#define MX23_PAD_LCD_D09__LCD_D09 0x1090
|
||||
#define MX23_PAD_LCD_D10__LCD_D10 0x10a0
|
||||
#define MX23_PAD_LCD_D11__LCD_D11 0x10b0
|
||||
#define MX23_PAD_LCD_D12__LCD_D12 0x10c0
|
||||
#define MX23_PAD_LCD_D13__LCD_D13 0x10d0
|
||||
#define MX23_PAD_LCD_D14__LCD_D14 0x10e0
|
||||
#define MX23_PAD_LCD_D15__LCD_D15 0x10f0
|
||||
#define MX23_PAD_LCD_D16__LCD_D16 0x1100
|
||||
#define MX23_PAD_LCD_D17__LCD_D17 0x1110
|
||||
#define MX23_PAD_LCD_RESET__LCD_RESET 0x1120
|
||||
#define MX23_PAD_LCD_RS__LCD_RS 0x1130
|
||||
#define MX23_PAD_LCD_WR__LCD_WR 0x1140
|
||||
#define MX23_PAD_LCD_CS__LCD_CS 0x1150
|
||||
#define MX23_PAD_LCD_DOTCK__LCD_DOTCK 0x1160
|
||||
#define MX23_PAD_LCD_ENABLE__LCD_ENABLE 0x1170
|
||||
#define MX23_PAD_LCD_HSYNC__LCD_HSYNC 0x1180
|
||||
#define MX23_PAD_LCD_VSYNC__LCD_VSYNC 0x1190
|
||||
#define MX23_PAD_PWM0__PWM0 0x11a0
|
||||
#define MX23_PAD_PWM1__PWM1 0x11b0
|
||||
#define MX23_PAD_PWM2__PWM2 0x11c0
|
||||
#define MX23_PAD_PWM3__PWM3 0x11d0
|
||||
#define MX23_PAD_PWM4__PWM4 0x11e0
|
||||
#define MX23_PAD_SSP1_CMD__SSP1_CMD 0x2000
|
||||
#define MX23_PAD_SSP1_DETECT__SSP1_DETECT 0x2010
|
||||
#define MX23_PAD_SSP1_DATA0__SSP1_DATA0 0x2020
|
||||
#define MX23_PAD_SSP1_DATA1__SSP1_DATA1 0x2030
|
||||
#define MX23_PAD_SSP1_DATA2__SSP1_DATA2 0x2040
|
||||
#define MX23_PAD_SSP1_DATA3__SSP1_DATA3 0x2050
|
||||
#define MX23_PAD_SSP1_SCK__SSP1_SCK 0x2060
|
||||
#define MX23_PAD_ROTARYA__ROTARYA 0x2070
|
||||
#define MX23_PAD_ROTARYB__ROTARYB 0x2080
|
||||
#define MX23_PAD_EMI_A00__EMI_A00 0x2090
|
||||
#define MX23_PAD_EMI_A01__EMI_A01 0x20a0
|
||||
#define MX23_PAD_EMI_A02__EMI_A02 0x20b0
|
||||
#define MX23_PAD_EMI_A03__EMI_A03 0x20c0
|
||||
#define MX23_PAD_EMI_A04__EMI_A04 0x20d0
|
||||
#define MX23_PAD_EMI_A05__EMI_A05 0x20e0
|
||||
#define MX23_PAD_EMI_A06__EMI_A06 0x20f0
|
||||
#define MX23_PAD_EMI_A07__EMI_A07 0x2100
|
||||
#define MX23_PAD_EMI_A08__EMI_A08 0x2110
|
||||
#define MX23_PAD_EMI_A09__EMI_A09 0x2120
|
||||
#define MX23_PAD_EMI_A10__EMI_A10 0x2130
|
||||
#define MX23_PAD_EMI_A11__EMI_A11 0x2140
|
||||
#define MX23_PAD_EMI_A12__EMI_A12 0x2150
|
||||
#define MX23_PAD_EMI_BA0__EMI_BA0 0x2160
|
||||
#define MX23_PAD_EMI_BA1__EMI_BA1 0x2170
|
||||
#define MX23_PAD_EMI_CASN__EMI_CASN 0x2180
|
||||
#define MX23_PAD_EMI_CE0N__EMI_CE0N 0x2190
|
||||
#define MX23_PAD_EMI_CE1N__EMI_CE1N 0x21a0
|
||||
#define MX23_PAD_GPMI_CE1N__GPMI_CE1N 0x21b0
|
||||
#define MX23_PAD_GPMI_CE0N__GPMI_CE0N 0x21c0
|
||||
#define MX23_PAD_EMI_CKE__EMI_CKE 0x21d0
|
||||
#define MX23_PAD_EMI_RASN__EMI_RASN 0x21e0
|
||||
#define MX23_PAD_EMI_WEN__EMI_WEN 0x21f0
|
||||
#define MX23_PAD_EMI_D00__EMI_D00 0x3000
|
||||
#define MX23_PAD_EMI_D01__EMI_D01 0x3010
|
||||
#define MX23_PAD_EMI_D02__EMI_D02 0x3020
|
||||
#define MX23_PAD_EMI_D03__EMI_D03 0x3030
|
||||
#define MX23_PAD_EMI_D04__EMI_D04 0x3040
|
||||
#define MX23_PAD_EMI_D05__EMI_D05 0x3050
|
||||
#define MX23_PAD_EMI_D06__EMI_D06 0x3060
|
||||
#define MX23_PAD_EMI_D07__EMI_D07 0x3070
|
||||
#define MX23_PAD_EMI_D08__EMI_D08 0x3080
|
||||
#define MX23_PAD_EMI_D09__EMI_D09 0x3090
|
||||
#define MX23_PAD_EMI_D10__EMI_D10 0x30a0
|
||||
#define MX23_PAD_EMI_D11__EMI_D11 0x30b0
|
||||
#define MX23_PAD_EMI_D12__EMI_D12 0x30c0
|
||||
#define MX23_PAD_EMI_D13__EMI_D13 0x30d0
|
||||
#define MX23_PAD_EMI_D14__EMI_D14 0x30e0
|
||||
#define MX23_PAD_EMI_D15__EMI_D15 0x30f0
|
||||
#define MX23_PAD_EMI_DQM0__EMI_DQM0 0x3100
|
||||
#define MX23_PAD_EMI_DQM1__EMI_DQM1 0x3110
|
||||
#define MX23_PAD_EMI_DQS0__EMI_DQS0 0x3120
|
||||
#define MX23_PAD_EMI_DQS1__EMI_DQS1 0x3130
|
||||
#define MX23_PAD_EMI_CLK__EMI_CLK 0x3140
|
||||
#define MX23_PAD_EMI_CLKN__EMI_CLKN 0x3150
|
||||
#define MX23_PAD_GPMI_D00__LCD_D8 0x0001
|
||||
#define MX23_PAD_GPMI_D01__LCD_D9 0x0011
|
||||
#define MX23_PAD_GPMI_D02__LCD_D10 0x0021
|
||||
#define MX23_PAD_GPMI_D03__LCD_D11 0x0031
|
||||
#define MX23_PAD_GPMI_D04__LCD_D12 0x0041
|
||||
#define MX23_PAD_GPMI_D05__LCD_D13 0x0051
|
||||
#define MX23_PAD_GPMI_D06__LCD_D14 0x0061
|
||||
#define MX23_PAD_GPMI_D07__LCD_D15 0x0071
|
||||
#define MX23_PAD_GPMI_D08__LCD_D18 0x0081
|
||||
#define MX23_PAD_GPMI_D09__LCD_D19 0x0091
|
||||
#define MX23_PAD_GPMI_D10__LCD_D20 0x00a1
|
||||
#define MX23_PAD_GPMI_D11__LCD_D21 0x00b1
|
||||
#define MX23_PAD_GPMI_D12__LCD_D22 0x00c1
|
||||
#define MX23_PAD_GPMI_D13__LCD_D23 0x00d1
|
||||
#define MX23_PAD_GPMI_D14__AUART2_RX 0x00e1
|
||||
#define MX23_PAD_GPMI_D15__AUART2_TX 0x00f1
|
||||
#define MX23_PAD_GPMI_CLE__LCD_D16 0x0101
|
||||
#define MX23_PAD_GPMI_ALE__LCD_D17 0x0111
|
||||
#define MX23_PAD_GPMI_CE2N__ATA_A2 0x0121
|
||||
#define MX23_PAD_AUART1_RTS__IR_CLK 0x01b1
|
||||
#define MX23_PAD_AUART1_RX__IR_RX 0x01c1
|
||||
#define MX23_PAD_AUART1_TX__IR_TX 0x01d1
|
||||
#define MX23_PAD_I2C_SCL__GPMI_RDY2 0x01e1
|
||||
#define MX23_PAD_I2C_SDA__GPMI_CE2N 0x01f1
|
||||
#define MX23_PAD_LCD_D00__ETM_DA8 0x1001
|
||||
#define MX23_PAD_LCD_D01__ETM_DA9 0x1011
|
||||
#define MX23_PAD_LCD_D02__ETM_DA10 0x1021
|
||||
#define MX23_PAD_LCD_D03__ETM_DA11 0x1031
|
||||
#define MX23_PAD_LCD_D04__ETM_DA12 0x1041
|
||||
#define MX23_PAD_LCD_D05__ETM_DA13 0x1051
|
||||
#define MX23_PAD_LCD_D06__ETM_DA14 0x1061
|
||||
#define MX23_PAD_LCD_D07__ETM_DA15 0x1071
|
||||
#define MX23_PAD_LCD_D08__ETM_DA0 0x1081
|
||||
#define MX23_PAD_LCD_D09__ETM_DA1 0x1091
|
||||
#define MX23_PAD_LCD_D10__ETM_DA2 0x10a1
|
||||
#define MX23_PAD_LCD_D11__ETM_DA3 0x10b1
|
||||
#define MX23_PAD_LCD_D12__ETM_DA4 0x10c1
|
||||
#define MX23_PAD_LCD_D13__ETM_DA5 0x10d1
|
||||
#define MX23_PAD_LCD_D14__ETM_DA6 0x10e1
|
||||
#define MX23_PAD_LCD_D15__ETM_DA7 0x10f1
|
||||
#define MX23_PAD_LCD_RESET__ETM_TCTL 0x1121
|
||||
#define MX23_PAD_LCD_RS__ETM_TCLK 0x1131
|
||||
#define MX23_PAD_LCD_DOTCK__GPMI_RDY3 0x1161
|
||||
#define MX23_PAD_LCD_ENABLE__I2C_SCL 0x1171
|
||||
#define MX23_PAD_LCD_HSYNC__I2C_SDA 0x1181
|
||||
#define MX23_PAD_LCD_VSYNC__LCD_BUSY 0x1191
|
||||
#define MX23_PAD_PWM0__ROTARYA 0x11a1
|
||||
#define MX23_PAD_PWM1__ROTARYB 0x11b1
|
||||
#define MX23_PAD_PWM2__GPMI_RDY3 0x11c1
|
||||
#define MX23_PAD_PWM3__ETM_TCTL 0x11d1
|
||||
#define MX23_PAD_PWM4__ETM_TCLK 0x11e1
|
||||
#define MX23_PAD_SSP1_DETECT__GPMI_CE3N 0x2011
|
||||
#define MX23_PAD_SSP1_DATA1__I2C_SCL 0x2031
|
||||
#define MX23_PAD_SSP1_DATA2__I2C_SDA 0x2041
|
||||
#define MX23_PAD_ROTARYA__AUART2_RTS 0x2071
|
||||
#define MX23_PAD_ROTARYB__AUART2_CTS 0x2081
|
||||
#define MX23_PAD_GPMI_D00__SSP2_DATA0 0x0002
|
||||
#define MX23_PAD_GPMI_D01__SSP2_DATA1 0x0012
|
||||
#define MX23_PAD_GPMI_D02__SSP2_DATA2 0x0022
|
||||
#define MX23_PAD_GPMI_D03__SSP2_DATA3 0x0032
|
||||
#define MX23_PAD_GPMI_D04__SSP2_DATA4 0x0042
|
||||
#define MX23_PAD_GPMI_D05__SSP2_DATA5 0x0052
|
||||
#define MX23_PAD_GPMI_D06__SSP2_DATA6 0x0062
|
||||
#define MX23_PAD_GPMI_D07__SSP2_DATA7 0x0072
|
||||
#define MX23_PAD_GPMI_D08__SSP1_DATA4 0x0082
|
||||
#define MX23_PAD_GPMI_D09__SSP1_DATA5 0x0092
|
||||
#define MX23_PAD_GPMI_D10__SSP1_DATA6 0x00a2
|
||||
#define MX23_PAD_GPMI_D11__SSP1_DATA7 0x00b2
|
||||
#define MX23_PAD_GPMI_D15__GPMI_CE3N 0x00f2
|
||||
#define MX23_PAD_GPMI_RDY0__SSP2_DETECT 0x0132
|
||||
#define MX23_PAD_GPMI_RDY1__SSP2_CMD 0x0142
|
||||
#define MX23_PAD_GPMI_WRN__SSP2_SCK 0x0182
|
||||
#define MX23_PAD_AUART1_CTS__SSP1_DATA4 0x01a2
|
||||
#define MX23_PAD_AUART1_RTS__SSP1_DATA5 0x01b2
|
||||
#define MX23_PAD_AUART1_RX__SSP1_DATA6 0x01c2
|
||||
#define MX23_PAD_AUART1_TX__SSP1_DATA7 0x01d2
|
||||
#define MX23_PAD_I2C_SCL__AUART1_TX 0x01e2
|
||||
#define MX23_PAD_I2C_SDA__AUART1_RX 0x01f2
|
||||
#define MX23_PAD_LCD_D08__SAIF2_SDATA0 0x1082
|
||||
#define MX23_PAD_LCD_D09__SAIF1_SDATA0 0x1092
|
||||
#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK 0x10a2
|
||||
#define MX23_PAD_LCD_D11__SAIF_LRCLK 0x10b2
|
||||
#define MX23_PAD_LCD_D12__SAIF2_SDATA1 0x10c2
|
||||
#define MX23_PAD_LCD_D13__SAIF2_SDATA2 0x10d2
|
||||
#define MX23_PAD_LCD_D14__SAIF1_SDATA2 0x10e2
|
||||
#define MX23_PAD_LCD_D15__SAIF1_SDATA1 0x10f2
|
||||
#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK 0x1102
|
||||
#define MX23_PAD_LCD_RESET__GPMI_CE3N 0x1122
|
||||
#define MX23_PAD_PWM0__DUART_RX 0x11a2
|
||||
#define MX23_PAD_PWM1__DUART_TX 0x11b2
|
||||
#define MX23_PAD_PWM3__AUART1_CTS 0x11d2
|
||||
#define MX23_PAD_PWM4__AUART1_RTS 0x11e2
|
||||
#define MX23_PAD_SSP1_CMD__JTAG_TDO 0x2002
|
||||
#define MX23_PAD_SSP1_DETECT__USB_OTG_ID 0x2012
|
||||
#define MX23_PAD_SSP1_DATA0__JTAG_TDI 0x2022
|
||||
#define MX23_PAD_SSP1_DATA1__JTAG_TCLK 0x2032
|
||||
#define MX23_PAD_SSP1_DATA2__JTAG_RTCK 0x2042
|
||||
#define MX23_PAD_SSP1_DATA3__JTAG_TMS 0x2052
|
||||
#define MX23_PAD_SSP1_SCK__JTAG_TRST 0x2062
|
||||
#define MX23_PAD_ROTARYA__SPDIF 0x2072
|
||||
#define MX23_PAD_ROTARYB__GPMI_CE3N 0x2082
|
||||
#define MX23_PAD_GPMI_D00__GPIO_0_0 0x0003
|
||||
#define MX23_PAD_GPMI_D01__GPIO_0_1 0x0013
|
||||
#define MX23_PAD_GPMI_D02__GPIO_0_2 0x0023
|
||||
#define MX23_PAD_GPMI_D03__GPIO_0_3 0x0033
|
||||
#define MX23_PAD_GPMI_D04__GPIO_0_4 0x0043
|
||||
#define MX23_PAD_GPMI_D05__GPIO_0_5 0x0053
|
||||
#define MX23_PAD_GPMI_D06__GPIO_0_6 0x0063
|
||||
#define MX23_PAD_GPMI_D07__GPIO_0_7 0x0073
|
||||
#define MX23_PAD_GPMI_D08__GPIO_0_8 0x0083
|
||||
#define MX23_PAD_GPMI_D09__GPIO_0_9 0x0093
|
||||
#define MX23_PAD_GPMI_D10__GPIO_0_10 0x00a3
|
||||
#define MX23_PAD_GPMI_D11__GPIO_0_11 0x00b3
|
||||
#define MX23_PAD_GPMI_D12__GPIO_0_12 0x00c3
|
||||
#define MX23_PAD_GPMI_D13__GPIO_0_13 0x00d3
|
||||
#define MX23_PAD_GPMI_D14__GPIO_0_14 0x00e3
|
||||
#define MX23_PAD_GPMI_D15__GPIO_0_15 0x00f3
|
||||
#define MX23_PAD_GPMI_CLE__GPIO_0_16 0x0103
|
||||
#define MX23_PAD_GPMI_ALE__GPIO_0_17 0x0113
|
||||
#define MX23_PAD_GPMI_CE2N__GPIO_0_18 0x0123
|
||||
#define MX23_PAD_GPMI_RDY0__GPIO_0_19 0x0133
|
||||
#define MX23_PAD_GPMI_RDY1__GPIO_0_20 0x0143
|
||||
#define MX23_PAD_GPMI_RDY2__GPIO_0_21 0x0153
|
||||
#define MX23_PAD_GPMI_RDY3__GPIO_0_22 0x0163
|
||||
#define MX23_PAD_GPMI_WPN__GPIO_0_23 0x0173
|
||||
#define MX23_PAD_GPMI_WRN__GPIO_0_24 0x0183
|
||||
#define MX23_PAD_GPMI_RDN__GPIO_0_25 0x0193
|
||||
#define MX23_PAD_AUART1_CTS__GPIO_0_26 0x01a3
|
||||
#define MX23_PAD_AUART1_RTS__GPIO_0_27 0x01b3
|
||||
#define MX23_PAD_AUART1_RX__GPIO_0_28 0x01c3
|
||||
#define MX23_PAD_AUART1_TX__GPIO_0_29 0x01d3
|
||||
#define MX23_PAD_I2C_SCL__GPIO_0_30 0x01e3
|
||||
#define MX23_PAD_I2C_SDA__GPIO_0_31 0x01f3
|
||||
#define MX23_PAD_LCD_D00__GPIO_1_0 0x1003
|
||||
#define MX23_PAD_LCD_D01__GPIO_1_1 0x1013
|
||||
#define MX23_PAD_LCD_D02__GPIO_1_2 0x1023
|
||||
#define MX23_PAD_LCD_D03__GPIO_1_3 0x1033
|
||||
#define MX23_PAD_LCD_D04__GPIO_1_4 0x1043
|
||||
#define MX23_PAD_LCD_D05__GPIO_1_5 0x1053
|
||||
#define MX23_PAD_LCD_D06__GPIO_1_6 0x1063
|
||||
#define MX23_PAD_LCD_D07__GPIO_1_7 0x1073
|
||||
#define MX23_PAD_LCD_D08__GPIO_1_8 0x1083
|
||||
#define MX23_PAD_LCD_D09__GPIO_1_9 0x1093
|
||||
#define MX23_PAD_LCD_D10__GPIO_1_10 0x10a3
|
||||
#define MX23_PAD_LCD_D11__GPIO_1_11 0x10b3
|
||||
#define MX23_PAD_LCD_D12__GPIO_1_12 0x10c3
|
||||
#define MX23_PAD_LCD_D13__GPIO_1_13 0x10d3
|
||||
#define MX23_PAD_LCD_D14__GPIO_1_14 0x10e3
|
||||
#define MX23_PAD_LCD_D15__GPIO_1_15 0x10f3
|
||||
#define MX23_PAD_LCD_D16__GPIO_1_16 0x1103
|
||||
#define MX23_PAD_LCD_D17__GPIO_1_17 0x1113
|
||||
#define MX23_PAD_LCD_RESET__GPIO_1_18 0x1123
|
||||
#define MX23_PAD_LCD_RS__GPIO_1_19 0x1133
|
||||
#define MX23_PAD_LCD_WR__GPIO_1_20 0x1143
|
||||
#define MX23_PAD_LCD_CS__GPIO_1_21 0x1153
|
||||
#define MX23_PAD_LCD_DOTCK__GPIO_1_22 0x1163
|
||||
#define MX23_PAD_LCD_ENABLE__GPIO_1_23 0x1173
|
||||
#define MX23_PAD_LCD_HSYNC__GPIO_1_24 0x1183
|
||||
#define MX23_PAD_LCD_VSYNC__GPIO_1_25 0x1193
|
||||
#define MX23_PAD_PWM0__GPIO_1_26 0x11a3
|
||||
#define MX23_PAD_PWM1__GPIO_1_27 0x11b3
|
||||
#define MX23_PAD_PWM2__GPIO_1_28 0x11c3
|
||||
#define MX23_PAD_PWM3__GPIO_1_29 0x11d3
|
||||
#define MX23_PAD_PWM4__GPIO_1_30 0x11e3
|
||||
#define MX23_PAD_SSP1_CMD__GPIO_2_0 0x2003
|
||||
#define MX23_PAD_SSP1_DETECT__GPIO_2_1 0x2013
|
||||
#define MX23_PAD_SSP1_DATA0__GPIO_2_2 0x2023
|
||||
#define MX23_PAD_SSP1_DATA1__GPIO_2_3 0x2033
|
||||
#define MX23_PAD_SSP1_DATA2__GPIO_2_4 0x2043
|
||||
#define MX23_PAD_SSP1_DATA3__GPIO_2_5 0x2053
|
||||
#define MX23_PAD_SSP1_SCK__GPIO_2_6 0x2063
|
||||
#define MX23_PAD_ROTARYA__GPIO_2_7 0x2073
|
||||
#define MX23_PAD_ROTARYB__GPIO_2_8 0x2083
|
||||
#define MX23_PAD_EMI_A00__GPIO_2_9 0x2093
|
||||
#define MX23_PAD_EMI_A01__GPIO_2_10 0x20a3
|
||||
#define MX23_PAD_EMI_A02__GPIO_2_11 0x20b3
|
||||
#define MX23_PAD_EMI_A03__GPIO_2_12 0x20c3
|
||||
#define MX23_PAD_EMI_A04__GPIO_2_13 0x20d3
|
||||
#define MX23_PAD_EMI_A05__GPIO_2_14 0x20e3
|
||||
#define MX23_PAD_EMI_A06__GPIO_2_15 0x20f3
|
||||
#define MX23_PAD_EMI_A07__GPIO_2_16 0x2103
|
||||
#define MX23_PAD_EMI_A08__GPIO_2_17 0x2113
|
||||
#define MX23_PAD_EMI_A09__GPIO_2_18 0x2123
|
||||
#define MX23_PAD_EMI_A10__GPIO_2_19 0x2133
|
||||
#define MX23_PAD_EMI_A11__GPIO_2_20 0x2143
|
||||
#define MX23_PAD_EMI_A12__GPIO_2_21 0x2153
|
||||
#define MX23_PAD_EMI_BA0__GPIO_2_22 0x2163
|
||||
#define MX23_PAD_EMI_BA1__GPIO_2_23 0x2173
|
||||
#define MX23_PAD_EMI_CASN__GPIO_2_24 0x2183
|
||||
#define MX23_PAD_EMI_CE0N__GPIO_2_25 0x2193
|
||||
#define MX23_PAD_EMI_CE1N__GPIO_2_26 0x21a3
|
||||
#define MX23_PAD_GPMI_CE1N__GPIO_2_27 0x21b3
|
||||
#define MX23_PAD_GPMI_CE0N__GPIO_2_28 0x21c3
|
||||
#define MX23_PAD_EMI_CKE__GPIO_2_29 0x21d3
|
||||
#define MX23_PAD_EMI_RASN__GPIO_2_30 0x21e3
|
||||
#define MX23_PAD_EMI_WEN__GPIO_2_31 0x21f3
|
||||
|
||||
#endif /* __DT_BINDINGS_MX23_PINCTRL_H__ */
|
||||
|
|
@ -10,7 +10,7 @@
|
|||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "imx23.dtsi"
|
||||
#include "imx23.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Freescale STMP378x Development Board";
|
||||
|
|
@ -39,12 +39,12 @@
|
|||
hog_pins_a: hog@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
|
||||
0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
|
||||
MX23_PAD_PWM3__GPIO_1_29
|
||||
MX23_PAD_PWM4__GPIO_1_30
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -9,7 +9,8 @@
|
|||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
/include/ "skeleton.dtsi"
|
||||
#include "skeleton.dtsi"
|
||||
#include "imx23-pinfunc.h"
|
||||
|
||||
/ {
|
||||
interrupt-parent = <&icoll>;
|
||||
|
|
@ -137,174 +138,174 @@
|
|||
duart_pins_a: duart@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x11a2 /* MX23_PAD_PWM0__DUART_RX */
|
||||
0x11b2 /* MX23_PAD_PWM1__DUART_TX */
|
||||
MX23_PAD_PWM0__DUART_RX
|
||||
MX23_PAD_PWM1__DUART_TX
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
auart0_pins_a: auart0@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */
|
||||
0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */
|
||||
0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */
|
||||
0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */
|
||||
MX23_PAD_AUART1_RX__AUART1_RX
|
||||
MX23_PAD_AUART1_TX__AUART1_TX
|
||||
MX23_PAD_AUART1_CTS__AUART1_CTS
|
||||
MX23_PAD_AUART1_RTS__AUART1_RTS
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
auart0_2pins_a: auart0-2pins@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */
|
||||
0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */
|
||||
MX23_PAD_I2C_SCL__AUART1_TX
|
||||
MX23_PAD_I2C_SDA__AUART1_RX
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
gpmi_pins_a: gpmi-nand@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */
|
||||
0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */
|
||||
0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */
|
||||
0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */
|
||||
0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */
|
||||
0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */
|
||||
0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */
|
||||
0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */
|
||||
0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */
|
||||
0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */
|
||||
0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */
|
||||
0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */
|
||||
0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
|
||||
0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
|
||||
0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
|
||||
0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */
|
||||
0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N */
|
||||
MX23_PAD_GPMI_D00__GPMI_D00
|
||||
MX23_PAD_GPMI_D01__GPMI_D01
|
||||
MX23_PAD_GPMI_D02__GPMI_D02
|
||||
MX23_PAD_GPMI_D03__GPMI_D03
|
||||
MX23_PAD_GPMI_D04__GPMI_D04
|
||||
MX23_PAD_GPMI_D05__GPMI_D05
|
||||
MX23_PAD_GPMI_D06__GPMI_D06
|
||||
MX23_PAD_GPMI_D07__GPMI_D07
|
||||
MX23_PAD_GPMI_CLE__GPMI_CLE
|
||||
MX23_PAD_GPMI_ALE__GPMI_ALE
|
||||
MX23_PAD_GPMI_RDY0__GPMI_RDY0
|
||||
MX23_PAD_GPMI_RDY1__GPMI_RDY1
|
||||
MX23_PAD_GPMI_WPN__GPMI_WPN
|
||||
MX23_PAD_GPMI_WRN__GPMI_WRN
|
||||
MX23_PAD_GPMI_RDN__GPMI_RDN
|
||||
MX23_PAD_GPMI_CE1N__GPMI_CE1N
|
||||
MX23_PAD_GPMI_CE0N__GPMI_CE0N
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
gpmi_pins_fixup: gpmi-pins-fixup {
|
||||
fsl,pinmux-ids = <
|
||||
0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
|
||||
0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
|
||||
0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
|
||||
MX23_PAD_GPMI_WPN__GPMI_WPN
|
||||
MX23_PAD_GPMI_WRN__GPMI_WRN
|
||||
MX23_PAD_GPMI_RDN__GPMI_RDN
|
||||
>;
|
||||
fsl,drive-strength = <2>;
|
||||
fsl,drive-strength = <MXS_DRIVE_12mA>;
|
||||
};
|
||||
|
||||
mmc0_4bit_pins_a: mmc0-4bit@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
|
||||
0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
|
||||
0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
|
||||
0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
|
||||
0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
|
||||
0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
|
||||
MX23_PAD_SSP1_DATA0__SSP1_DATA0
|
||||
MX23_PAD_SSP1_DATA1__SSP1_DATA1
|
||||
MX23_PAD_SSP1_DATA2__SSP1_DATA2
|
||||
MX23_PAD_SSP1_DATA3__SSP1_DATA3
|
||||
MX23_PAD_SSP1_CMD__SSP1_CMD
|
||||
MX23_PAD_SSP1_SCK__SSP1_SCK
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_8mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
mmc0_8bit_pins_a: mmc0-8bit@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
|
||||
0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
|
||||
0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
|
||||
0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
|
||||
0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */
|
||||
0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */
|
||||
0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */
|
||||
0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */
|
||||
0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
|
||||
0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
|
||||
0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
|
||||
MX23_PAD_SSP1_DATA0__SSP1_DATA0
|
||||
MX23_PAD_SSP1_DATA1__SSP1_DATA1
|
||||
MX23_PAD_SSP1_DATA2__SSP1_DATA2
|
||||
MX23_PAD_SSP1_DATA3__SSP1_DATA3
|
||||
MX23_PAD_GPMI_D08__SSP1_DATA4
|
||||
MX23_PAD_GPMI_D09__SSP1_DATA5
|
||||
MX23_PAD_GPMI_D10__SSP1_DATA6
|
||||
MX23_PAD_GPMI_D11__SSP1_DATA7
|
||||
MX23_PAD_SSP1_CMD__SSP1_CMD
|
||||
MX23_PAD_SSP1_DETECT__SSP1_DETECT
|
||||
MX23_PAD_SSP1_SCK__SSP1_SCK
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_8mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
mmc0_pins_fixup: mmc0-pins-fixup {
|
||||
fsl,pinmux-ids = <
|
||||
0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
|
||||
0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
|
||||
MX23_PAD_SSP1_DETECT__SSP1_DETECT
|
||||
MX23_PAD_SSP1_SCK__SSP1_SCK
|
||||
>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
pwm2_pins_a: pwm2@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x11c0 /* MX23_PAD_PWM2__PWM2 */
|
||||
MX23_PAD_PWM2__PWM2
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
lcdif_24bit_pins_a: lcdif-24bit@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */
|
||||
0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */
|
||||
0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */
|
||||
0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */
|
||||
0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */
|
||||
0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */
|
||||
0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */
|
||||
0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */
|
||||
0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */
|
||||
0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */
|
||||
0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */
|
||||
0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */
|
||||
0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */
|
||||
0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */
|
||||
0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */
|
||||
0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */
|
||||
0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */
|
||||
0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */
|
||||
0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */
|
||||
0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */
|
||||
0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */
|
||||
0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */
|
||||
0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */
|
||||
0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */
|
||||
0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */
|
||||
0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */
|
||||
0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */
|
||||
0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */
|
||||
MX23_PAD_LCD_D00__LCD_D00
|
||||
MX23_PAD_LCD_D01__LCD_D01
|
||||
MX23_PAD_LCD_D02__LCD_D02
|
||||
MX23_PAD_LCD_D03__LCD_D03
|
||||
MX23_PAD_LCD_D04__LCD_D04
|
||||
MX23_PAD_LCD_D05__LCD_D05
|
||||
MX23_PAD_LCD_D06__LCD_D06
|
||||
MX23_PAD_LCD_D07__LCD_D07
|
||||
MX23_PAD_LCD_D08__LCD_D08
|
||||
MX23_PAD_LCD_D09__LCD_D09
|
||||
MX23_PAD_LCD_D10__LCD_D10
|
||||
MX23_PAD_LCD_D11__LCD_D11
|
||||
MX23_PAD_LCD_D12__LCD_D12
|
||||
MX23_PAD_LCD_D13__LCD_D13
|
||||
MX23_PAD_LCD_D14__LCD_D14
|
||||
MX23_PAD_LCD_D15__LCD_D15
|
||||
MX23_PAD_LCD_D16__LCD_D16
|
||||
MX23_PAD_LCD_D17__LCD_D17
|
||||
MX23_PAD_GPMI_D08__LCD_D18
|
||||
MX23_PAD_GPMI_D09__LCD_D19
|
||||
MX23_PAD_GPMI_D10__LCD_D20
|
||||
MX23_PAD_GPMI_D11__LCD_D21
|
||||
MX23_PAD_GPMI_D12__LCD_D22
|
||||
MX23_PAD_GPMI_D13__LCD_D23
|
||||
MX23_PAD_LCD_DOTCK__LCD_DOTCK
|
||||
MX23_PAD_LCD_ENABLE__LCD_ENABLE
|
||||
MX23_PAD_LCD_HSYNC__LCD_HSYNC
|
||||
MX23_PAD_LCD_VSYNC__LCD_VSYNC
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
spi2_pins_a: spi2@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0182 /* MX23_PAD_GPMI_WRN__SSP2_SCK */
|
||||
0x0142 /* MX23_PAD_GPMI_RDY1__SSP2_CMD */
|
||||
0x0002 /* MX23_PAD_GPMI_D00__SSP2_DATA0 */
|
||||
0x0032 /* MX23_PAD_GPMI_D03__SSP2_DATA3 */
|
||||
MX23_PAD_GPMI_WRN__SSP2_SCK
|
||||
MX23_PAD_GPMI_RDY1__SSP2_CMD
|
||||
MX23_PAD_GPMI_D00__SSP2_DATA0
|
||||
MX23_PAD_GPMI_D03__SSP2_DATA3
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_8mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -16,6 +16,26 @@
|
|||
model = "Armadeus Systems APF27Dev docking/development board";
|
||||
compatible = "armadeus,imx27-apf27dev", "armadeus,imx27-apf27", "fsl,imx27";
|
||||
|
||||
display: display {
|
||||
model = "Chimei-LW700AT9003";
|
||||
native-mode = <&timing0>;
|
||||
bits-per-pixel = <16>; /* non-standard but required */
|
||||
fsl,pcr = <0xfae80083>; /* non-standard but required */
|
||||
display-timings {
|
||||
timing0: 640x480 {
|
||||
clock-frequency = <33000033>;
|
||||
hactive = <800>;
|
||||
vactive = <640>;
|
||||
hback-porch = <96>;
|
||||
hfront-porch = <96>;
|
||||
vback-porch = <20>;
|
||||
vfront-porch = <21>;
|
||||
hsync-len = <64>;
|
||||
vsync-len = <4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
|
|
@ -50,6 +70,12 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&fb {
|
||||
display = <&display>;
|
||||
fsl,dmacr = <0x00020010>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
|
|
|||
|
|
@ -123,6 +123,7 @@
|
|||
};
|
||||
|
||||
pwm: pwm@10006000 {
|
||||
#pwm-cells = <2>;
|
||||
compatible = "fsl,imx27-pwm";
|
||||
reg = <0x10006000 0x1000>;
|
||||
interrupts = <23>;
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@
|
|||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "imx28.dtsi"
|
||||
#include "imx28.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Armadeus Systems APF28 module";
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@
|
|||
*/
|
||||
|
||||
/* APF28Dev is a docking board for the APF28 SOM */
|
||||
/include/ "imx28-apf28.dts"
|
||||
#include "imx28-apf28.dts"
|
||||
|
||||
/ {
|
||||
model = "Armadeus Systems APF28Dev docking/development board";
|
||||
|
|
@ -41,30 +41,30 @@
|
|||
hog_pins_apf28dev: hog@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1103 /* MX28_PAD_LCD_D16__GPIO_1_16 */
|
||||
0x1113 /* MX28_PAD_LCD_D17__GPIO_1_17 */
|
||||
0x1123 /* MX28_PAD_LCD_D18__GPIO_1_18 */
|
||||
0x1133 /* MX28_PAD_LCD_D19__GPIO_1_19 */
|
||||
0x1143 /* MX28_PAD_LCD_D20__GPIO_1_20 */
|
||||
0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */
|
||||
0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
|
||||
MX28_PAD_LCD_D16__GPIO_1_16
|
||||
MX28_PAD_LCD_D17__GPIO_1_17
|
||||
MX28_PAD_LCD_D18__GPIO_1_18
|
||||
MX28_PAD_LCD_D19__GPIO_1_19
|
||||
MX28_PAD_LCD_D20__GPIO_1_20
|
||||
MX28_PAD_LCD_D21__GPIO_1_21
|
||||
MX28_PAD_LCD_D22__GPIO_1_22
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
lcdif_pins_apf28dev: lcdif-apf28dev@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
|
||||
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
|
||||
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
|
||||
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
|
||||
MX28_PAD_LCD_RD_E__LCD_VSYNC
|
||||
MX28_PAD_LCD_WR_RWN__LCD_HSYNC
|
||||
MX28_PAD_LCD_RS__LCD_DOTCLK
|
||||
MX28_PAD_LCD_CS__LCD_ENABLE
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
/dts-v1/;
|
||||
/include/ "imx28.dtsi"
|
||||
#include "imx28.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Bluegiga APX4 Development Kit";
|
||||
|
|
@ -40,53 +40,53 @@
|
|||
hog_pins_a: hog@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
|
||||
0x0153 /* MX28_PAD_GPMI_RDY1__GPIO_0_21 */
|
||||
0x2123 /* MX28_PAD_SSP2_MISO__GPIO_2_18 */
|
||||
0x2131 /* MX28_PAD_SSP2_SS0__GPIO_2_19 */
|
||||
0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
|
||||
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
|
||||
0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 */
|
||||
MX28_PAD_GPMI_CE1N__GPIO_0_17
|
||||
MX28_PAD_GPMI_RDY1__GPIO_0_21
|
||||
MX28_PAD_SSP2_MISO__GPIO_2_18
|
||||
MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
|
||||
MX28_PAD_PWM3__GPIO_3_28
|
||||
MX28_PAD_LCD_RESET__GPIO_3_30
|
||||
MX28_PAD_JTAG_RTCK__GPIO_4_20
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
lcdif_pins_apx4: lcdif-apx4@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
|
||||
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
|
||||
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
|
||||
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
|
||||
MX28_PAD_LCD_RD_E__LCD_VSYNC
|
||||
MX28_PAD_LCD_WR_RWN__LCD_HSYNC
|
||||
MX28_PAD_LCD_RS__LCD_DOTCLK
|
||||
MX28_PAD_LCD_CS__LCD_ENABLE
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2041 /* MX28_PAD_SSP0_DATA4__SSP2_D0 */
|
||||
0x2051 /* MX28_PAD_SSP0_DATA5__SSP2_D3 */
|
||||
0x2061 /* MX28_PAD_SSP0_DATA6__SSP2_CMD */
|
||||
0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
|
||||
0x2141 /* MX28_PAD_SSP2_SS1__SSP2_D1 */
|
||||
0x2151 /* MX28_PAD_SSP2_SS2__SSP2_D2 */
|
||||
MX28_PAD_SSP0_DATA4__SSP2_D0
|
||||
MX28_PAD_SSP0_DATA5__SSP2_D3
|
||||
MX28_PAD_SSP0_DATA6__SSP2_CMD
|
||||
MX28_PAD_SSP0_DATA7__SSP2_SCK
|
||||
MX28_PAD_SSP2_SS1__SSP2_D1
|
||||
MX28_PAD_SSP2_SS2__SSP2_D2
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_8mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
|
||||
fsl,pinmux-ids = <
|
||||
0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
|
||||
MX28_PAD_SSP0_DATA7__SSP2_SCK
|
||||
>;
|
||||
fsl,drive-strength = <2>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_12mA>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@
|
|||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "imx28.dtsi"
|
||||
#include "imx28.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Crystalfontz CFA-10036 Board";
|
||||
|
|
@ -26,31 +26,31 @@
|
|||
ssd1306_cfa10036: ssd1306-10036@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */
|
||||
MX28_PAD_SSP0_DATA7__GPIO_2_7
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
led_pins_cfa10036: leds-10036@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3043 /* MX28_PAD_AUART1_RX__GPIO_3_4 */
|
||||
MX28_PAD_AUART1_RX__GPIO_3_4
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
usb0_otg_cfa10036: otg-10036@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0142 /* MX28_PAD_GPMI_READY0__USB0_ID */
|
||||
MX28_PAD_GPMI_RDY0__USB0_ID
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
};
|
||||
|
|
|
|||
|
|
@ -13,7 +13,7 @@
|
|||
* The CFA-10049 is an expansion board for the CFA-10036 module, thus we
|
||||
* need to include the CFA-10036 DTS.
|
||||
*/
|
||||
/include/ "imx28-cfa10036.dts"
|
||||
#include "imx28-cfa10036.dts"
|
||||
|
||||
/ {
|
||||
model = "Crystalfontz CFA-10037 Board";
|
||||
|
|
@ -25,21 +25,21 @@
|
|||
usb_pins_cfa10037: usb-10037@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
|
||||
MX28_PAD_GPMI_D07__GPIO_0_7
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
mac0_pins_cfa10037: mac0-10037@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
|
||||
MX28_PAD_SSP2_SS2__GPIO_2_21
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -13,7 +13,7 @@
|
|||
* The CFA-10049 is an expansion board for the CFA-10036 module, thus we
|
||||
* need to include the CFA-10036 DTS.
|
||||
*/
|
||||
/include/ "imx28-cfa10036.dts"
|
||||
#include "imx28-cfa10036.dts"
|
||||
|
||||
/ {
|
||||
model = "Crystalfontz CFA-10049 Board";
|
||||
|
|
@ -25,150 +25,150 @@
|
|||
usb_pins_cfa10049: usb-10049@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
|
||||
MX28_PAD_GPMI_D07__GPIO_0_7
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
i2cmux_pins_cfa10049: i2cmux-10049@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
|
||||
0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
|
||||
MX28_PAD_LCD_D22__GPIO_1_22
|
||||
MX28_PAD_LCD_D23__GPIO_1_23
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
mac0_pins_cfa10049: mac0-10049@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
|
||||
MX28_PAD_SSP2_SS2__GPIO_2_21
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
pca_pins_cfa10049: pca-10049@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
|
||||
MX28_PAD_SSP2_SS0__GPIO_2_19
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
rotary_pins_cfa10049: rotary-10049@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
|
||||
0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
|
||||
MX28_PAD_I2C0_SCL__GPIO_3_24
|
||||
MX28_PAD_I2C0_SDA__GPIO_3_25
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
|
||||
MX28_PAD_SAIF1_SDATA0__GPIO_3_26
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
spi2_pins_cfa10049: spi2-cfa10049@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
|
||||
0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
|
||||
0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
|
||||
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
|
||||
MX28_PAD_SSP2_SCK__GPIO_2_16
|
||||
MX28_PAD_SSP2_MOSI__GPIO_2_17
|
||||
MX28_PAD_SSP2_MISO__GPIO_2_18
|
||||
MX28_PAD_AUART1_TX__GPIO_3_5
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_8mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
spi3_pins_cfa10049: spi3-cfa10049@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0183 /* MX28_PAD_GPMI_RDN__GPIO_0_24 */
|
||||
0x01c3 /* MX28_PAD_GPMI_RESETN__GPIO_0_28 */
|
||||
0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
|
||||
0x01a3 /* MX28_PAD_GPMI_ALE__GPIO_0_26 */
|
||||
0x01b3 /* MX28_PAD_GPMI_CLE__GPIO_0_27 */
|
||||
MX28_PAD_GPMI_RDN__GPIO_0_24
|
||||
MX28_PAD_GPMI_RESETN__GPIO_0_28
|
||||
MX28_PAD_GPMI_CE1N__GPIO_0_17
|
||||
MX28_PAD_GPMI_ALE__GPIO_0_26
|
||||
MX28_PAD_GPMI_CLE__GPIO_0_27
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_8mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
|
||||
0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
|
||||
0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
|
||||
0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
|
||||
0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
|
||||
0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
|
||||
0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
|
||||
0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
|
||||
0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
|
||||
0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
|
||||
0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
|
||||
0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
|
||||
0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
|
||||
0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
|
||||
0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
|
||||
0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
|
||||
0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
|
||||
0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
|
||||
MX28_PAD_LCD_D00__LCD_D0
|
||||
MX28_PAD_LCD_D01__LCD_D1
|
||||
MX28_PAD_LCD_D02__LCD_D2
|
||||
MX28_PAD_LCD_D03__LCD_D3
|
||||
MX28_PAD_LCD_D04__LCD_D4
|
||||
MX28_PAD_LCD_D05__LCD_D5
|
||||
MX28_PAD_LCD_D06__LCD_D6
|
||||
MX28_PAD_LCD_D07__LCD_D7
|
||||
MX28_PAD_LCD_D08__LCD_D8
|
||||
MX28_PAD_LCD_D09__LCD_D9
|
||||
MX28_PAD_LCD_D10__LCD_D10
|
||||
MX28_PAD_LCD_D11__LCD_D11
|
||||
MX28_PAD_LCD_D12__LCD_D12
|
||||
MX28_PAD_LCD_D13__LCD_D13
|
||||
MX28_PAD_LCD_D14__LCD_D14
|
||||
MX28_PAD_LCD_D15__LCD_D15
|
||||
MX28_PAD_LCD_D16__LCD_D16
|
||||
MX28_PAD_LCD_D17__LCD_D17
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
lcdif_pins_cfa10049: lcdif-evk@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
|
||||
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
|
||||
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
|
||||
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
|
||||
MX28_PAD_LCD_RD_E__LCD_VSYNC
|
||||
MX28_PAD_LCD_WR_RWN__LCD_HSYNC
|
||||
MX28_PAD_LCD_RS__LCD_DOTCLK
|
||||
MX28_PAD_LCD_CS__LCD_ENABLE
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
|
||||
MX28_PAD_LCD_RESET__GPIO_3_30
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
w1_gpio_pins: w1-gpio@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */
|
||||
MX28_PAD_LCD_D21__GPIO_1_21
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>; /* 0 will enable the keeper */
|
||||
fsl,drive-strength = <MXS_DRIVE_8mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -14,7 +14,7 @@
|
|||
* The CFA-10055 is an expansion board for the CFA-10036 module and
|
||||
* CFA-10037, thus we need to include the CFA-10037 DTS.
|
||||
*/
|
||||
/include/ "imx28-cfa10037.dts"
|
||||
#include "imx28-cfa10037.dts"
|
||||
|
||||
/ {
|
||||
model = "Crystalfontz CFA-10055 Board";
|
||||
|
|
@ -26,64 +26,64 @@
|
|||
spi2_pins_cfa10055: spi2-cfa10055@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
|
||||
0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
|
||||
0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
|
||||
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
|
||||
MX28_PAD_SSP2_SCK__GPIO_2_16
|
||||
MX28_PAD_SSP2_MOSI__GPIO_2_17
|
||||
MX28_PAD_SSP2_MISO__GPIO_2_18
|
||||
MX28_PAD_AUART1_TX__GPIO_3_5
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_8mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
|
||||
0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
|
||||
0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
|
||||
0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
|
||||
0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
|
||||
0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
|
||||
0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
|
||||
0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
|
||||
0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
|
||||
0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
|
||||
0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
|
||||
0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
|
||||
0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
|
||||
0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
|
||||
0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
|
||||
0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
|
||||
0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
|
||||
0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
|
||||
MX28_PAD_LCD_D00__LCD_D0
|
||||
MX28_PAD_LCD_D01__LCD_D1
|
||||
MX28_PAD_LCD_D02__LCD_D2
|
||||
MX28_PAD_LCD_D03__LCD_D3
|
||||
MX28_PAD_LCD_D04__LCD_D4
|
||||
MX28_PAD_LCD_D05__LCD_D5
|
||||
MX28_PAD_LCD_D06__LCD_D6
|
||||
MX28_PAD_LCD_D07__LCD_D7
|
||||
MX28_PAD_LCD_D08__LCD_D8
|
||||
MX28_PAD_LCD_D09__LCD_D9
|
||||
MX28_PAD_LCD_D10__LCD_D10
|
||||
MX28_PAD_LCD_D11__LCD_D11
|
||||
MX28_PAD_LCD_D12__LCD_D12
|
||||
MX28_PAD_LCD_D13__LCD_D13
|
||||
MX28_PAD_LCD_D14__LCD_D14
|
||||
MX28_PAD_LCD_D15__LCD_D15
|
||||
MX28_PAD_LCD_D16__LCD_D16
|
||||
MX28_PAD_LCD_D17__LCD_D17
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
lcdif_pins_cfa10055: lcdif-evk@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
|
||||
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
|
||||
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
|
||||
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
|
||||
MX28_PAD_LCD_RD_E__LCD_VSYNC
|
||||
MX28_PAD_LCD_WR_RWN__LCD_HSYNC
|
||||
MX28_PAD_LCD_RS__LCD_DOTCLK
|
||||
MX28_PAD_LCD_CS__LCD_ENABLE
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
|
||||
MX28_PAD_LCD_RESET__GPIO_3_30
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -13,7 +13,7 @@
|
|||
* The CFA-10055 is an expansion board for the CFA-10036 module and
|
||||
* CFA-10037, thus we need to include the CFA-10037 DTS.
|
||||
*/
|
||||
/include/ "imx28-cfa10037.dts"
|
||||
#include "imx28-cfa10037.dts"
|
||||
|
||||
/ {
|
||||
model = "Crystalfontz CFA-10056 Board";
|
||||
|
|
@ -25,37 +25,37 @@
|
|||
spi2_pins_cfa10056: spi2-cfa10056@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
|
||||
0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
|
||||
0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
|
||||
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
|
||||
MX28_PAD_SSP2_SCK__GPIO_2_16
|
||||
MX28_PAD_SSP2_MOSI__GPIO_2_17
|
||||
MX28_PAD_SSP2_MISO__GPIO_2_18
|
||||
MX28_PAD_AUART1_TX__GPIO_3_5
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_8mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
lcdif_pins_cfa10056: lcdif-10056@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
|
||||
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
|
||||
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
|
||||
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
|
||||
MX28_PAD_LCD_RD_E__LCD_VSYNC
|
||||
MX28_PAD_LCD_WR_RWN__LCD_HSYNC
|
||||
MX28_PAD_LCD_RS__LCD_DOTCLK
|
||||
MX28_PAD_LCD_CS__LCD_ENABLE
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
|
||||
MX28_PAD_LCD_RESET__GPIO_3_30
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -14,7 +14,7 @@
|
|||
* The CFA-10057 is an expansion board for the CFA-10036 module, thus we
|
||||
* need to include the CFA-10036 DTS.
|
||||
*/
|
||||
/include/ "imx28-cfa10036.dts"
|
||||
#include "imx28-cfa10036.dts"
|
||||
|
||||
/ {
|
||||
model = "Crystalfontz CFA-10057 Board";
|
||||
|
|
@ -26,51 +26,51 @@
|
|||
usb_pins_cfa10057: usb-10057@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
|
||||
MX28_PAD_GPMI_D07__GPIO_0_7
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
|
||||
0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
|
||||
0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
|
||||
0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
|
||||
0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
|
||||
0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
|
||||
0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
|
||||
0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
|
||||
0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
|
||||
0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
|
||||
0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
|
||||
0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
|
||||
0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
|
||||
0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
|
||||
0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
|
||||
0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
|
||||
0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
|
||||
0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
|
||||
MX28_PAD_LCD_D00__LCD_D0
|
||||
MX28_PAD_LCD_D01__LCD_D1
|
||||
MX28_PAD_LCD_D02__LCD_D2
|
||||
MX28_PAD_LCD_D03__LCD_D3
|
||||
MX28_PAD_LCD_D04__LCD_D4
|
||||
MX28_PAD_LCD_D05__LCD_D5
|
||||
MX28_PAD_LCD_D06__LCD_D6
|
||||
MX28_PAD_LCD_D07__LCD_D7
|
||||
MX28_PAD_LCD_D08__LCD_D8
|
||||
MX28_PAD_LCD_D09__LCD_D9
|
||||
MX28_PAD_LCD_D10__LCD_D10
|
||||
MX28_PAD_LCD_D11__LCD_D11
|
||||
MX28_PAD_LCD_D12__LCD_D12
|
||||
MX28_PAD_LCD_D13__LCD_D13
|
||||
MX28_PAD_LCD_D14__LCD_D14
|
||||
MX28_PAD_LCD_D15__LCD_D15
|
||||
MX28_PAD_LCD_D16__LCD_D16
|
||||
MX28_PAD_LCD_D17__LCD_D17
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
lcdif_pins_cfa10057: lcdif-evk@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
|
||||
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
|
||||
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
|
||||
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
|
||||
MX28_PAD_LCD_RD_E__LCD_VSYNC
|
||||
MX28_PAD_LCD_WR_RWN__LCD_HSYNC
|
||||
MX28_PAD_LCD_RS__LCD_DOTCLK
|
||||
MX28_PAD_LCD_CS__LCD_ENABLE
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -14,7 +14,7 @@
|
|||
* The CFA-10058 is an expansion board for the CFA-10036 module, thus we
|
||||
* need to include the CFA-10036 DTS.
|
||||
*/
|
||||
/include/ "imx28-cfa10036.dts"
|
||||
#include "imx28-cfa10036.dts"
|
||||
|
||||
/ {
|
||||
model = "Crystalfontz CFA-10058 Board";
|
||||
|
|
@ -26,24 +26,24 @@
|
|||
usb_pins_cfa10058: usb-10058@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
|
||||
MX28_PAD_GPMI_D07__GPIO_0_7
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
lcdif_pins_cfa10058: lcdif-10058@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
|
||||
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
|
||||
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
|
||||
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
|
||||
MX28_PAD_LCD_RD_E__LCD_VSYNC
|
||||
MX28_PAD_LCD_WR_RWN__LCD_HSYNC
|
||||
MX28_PAD_LCD_RS__LCD_DOTCLK
|
||||
MX28_PAD_LCD_CS__LCD_ENABLE
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@
|
|||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "imx28.dtsi"
|
||||
#include "imx28.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Freescale i.MX28 Evaluation Kit";
|
||||
|
|
@ -70,52 +70,52 @@
|
|||
hog_pins_a: hog@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */
|
||||
0x20f3 /* MX28_PAD_SSP1_DATA3__GPIO_2_15 */
|
||||
0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13 */
|
||||
0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */
|
||||
0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
|
||||
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
|
||||
0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */
|
||||
0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */
|
||||
MX28_PAD_SSP1_CMD__GPIO_2_13
|
||||
MX28_PAD_SSP1_DATA3__GPIO_2_15
|
||||
MX28_PAD_ENET0_RX_CLK__GPIO_4_13
|
||||
MX28_PAD_SSP1_SCK__GPIO_2_12
|
||||
MX28_PAD_PWM3__GPIO_3_28
|
||||
MX28_PAD_LCD_RESET__GPIO_3_30
|
||||
MX28_PAD_AUART2_RX__GPIO_3_8
|
||||
MX28_PAD_AUART2_TX__GPIO_3_9
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
led_pin_gpio3_5: led_gpio3_5@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
|
||||
MX28_PAD_AUART1_TX__GPIO_3_5
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
gpmi_pins_evk: gpmi-nand-evk@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */
|
||||
0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */
|
||||
MX28_PAD_GPMI_CE1N__GPMI_CE1N
|
||||
MX28_PAD_GPMI_RDY1__GPMI_READY1
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
lcdif_pins_evk: lcdif-evk@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
|
||||
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
|
||||
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
|
||||
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
|
||||
MX28_PAD_LCD_RD_E__LCD_VSYNC
|
||||
MX28_PAD_LCD_WR_RWN__LCD_HSYNC
|
||||
MX28_PAD_LCD_RS__LCD_DOTCLK
|
||||
MX28_PAD_LCD_CS__LCD_ENABLE
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -182,6 +182,7 @@
|
|||
};
|
||||
|
||||
lradc@80050000 {
|
||||
fsl,lradc-touchscreen-wires = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
@ -242,6 +243,8 @@
|
|||
|
||||
ahb@80080000 {
|
||||
usb0: usb@80080000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb0_id_pins_a>;
|
||||
vbus-supply = <®_usb0_vbus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -0,0 +1,266 @@
|
|||
/*
|
||||
* Copyright (C) 2013 Marek Vasut <marex@denx.de>
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "imx28.dtsi"
|
||||
|
||||
/ {
|
||||
model = "MSR M28CU3";
|
||||
compatible = "msr,m28cu3", "fsl,imx28";
|
||||
|
||||
memory {
|
||||
reg = <0x40000000 0x08000000>;
|
||||
};
|
||||
|
||||
apb@80000000 {
|
||||
apbh@80000000 {
|
||||
gpmi-nand@8000c000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
|
||||
status = "okay";
|
||||
|
||||
partition@0 {
|
||||
label = "gpmi-nfc-0-boot";
|
||||
reg = <0x00000000 0x01400000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1 {
|
||||
label = "gpmi-nfc-general-use";
|
||||
reg = <0x01400000 0x0ec00000>;
|
||||
};
|
||||
};
|
||||
|
||||
ssp0: ssp@80010000 {
|
||||
compatible = "fsl,imx28-mmc";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_4bit_pins_a
|
||||
&mmc0_cd_cfg
|
||||
&mmc0_sck_cfg>;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <®_vddio_sd0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ssp2: ssp@80014000 {
|
||||
compatible = "fsl,imx28-mmc";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc2_4bit_pins_a
|
||||
&mmc2_cd_cfg
|
||||
&mmc2_sck_cfg>;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <®_vddio_sd1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pinctrl@80018000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hog_pins_a>;
|
||||
|
||||
hog_pins_a: hog@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_SSP2_SS0__GPIO_2_19
|
||||
MX28_PAD_PWM4__GPIO_3_29
|
||||
MX28_PAD_AUART2_RX__GPIO_3_8
|
||||
MX28_PAD_ENET0_RX_CLK__GPIO_4_13
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
lcdif_pins_m28: lcdif-m28@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_LCD_VSYNC__LCD_VSYNC
|
||||
MX28_PAD_LCD_HSYNC__LCD_HSYNC
|
||||
MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
|
||||
MX28_PAD_LCD_RESET__LCD_RESET
|
||||
MX28_PAD_LCD_CS__LCD_ENABLE
|
||||
MX28_PAD_AUART1_TX__GPIO_3_5
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
led_pins_gpio: leds-m28@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_SSP3_MISO__GPIO_2_26
|
||||
MX28_PAD_SSP3_SCK__GPIO_2_24
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
};
|
||||
|
||||
ocotp@8002c000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
lcdif@80030000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcdif_24bit_pins_a
|
||||
&lcdif_pins_m28>;
|
||||
display = <&display>;
|
||||
reset-active-high;
|
||||
status = "okay";
|
||||
|
||||
display: display0 {
|
||||
bits-per-pixel = <32>;
|
||||
bus-width = <24>;
|
||||
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: timing0 {
|
||||
clock-frequency = <6410256>;
|
||||
hactive = <320>;
|
||||
vactive = <240>;
|
||||
hback-porch = <38>;
|
||||
hfront-porch = <20>;
|
||||
vback-porch = <15>;
|
||||
vfront-porch = <5>;
|
||||
hsync-len = <30>;
|
||||
vsync-len = <3>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
apbx@80040000 {
|
||||
duart: serial@80074000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&duart_pins_b>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usbphy1: usbphy@8007e000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
auart0: serial@8006a000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&auart0_2pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
auart3: serial@80070000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&auart3_2pins_b>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pwm: pwm@80064000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm3_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ahb@80080000 {
|
||||
usb1: usb@80090000 {
|
||||
vbus-supply = <®_usb1_vbus>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usbphy1_pins_a>;
|
||||
disable-over-current;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
mac0: ethernet@800f0000 {
|
||||
phy-mode = "rmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mac0_pins_a>;
|
||||
phy-reset-gpios = <&gpio4 13 0>;
|
||||
phy-reset-duration = <100>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
mac1: ethernet@800f4000 {
|
||||
phy-mode = "rmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mac1_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm 3 5000000>;
|
||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <6>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_pins_gpio>;
|
||||
|
||||
user1 {
|
||||
label = "sd0-led";
|
||||
gpios = <&gpio2 26 0>;
|
||||
linux,default-trigger = "mmc0";
|
||||
};
|
||||
|
||||
user2 {
|
||||
label = "sd1-led";
|
||||
gpios = <&gpio2 24 0>;
|
||||
linux,default-trigger = "mmc2";
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
|
||||
reg_3p3v: 3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_vddio_sd0: vddio-sd0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vddio-sd0";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio3 29 0>;
|
||||
};
|
||||
|
||||
reg_vddio_sd1: vddio-sd1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vddio-sd1";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio2 19 0>;
|
||||
};
|
||||
|
||||
reg_usb1_vbus: usb1_vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb1_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio3 8 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -10,7 +10,7 @@
|
|||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "imx28.dtsi"
|
||||
#include "imx28.dtsi"
|
||||
|
||||
/ {
|
||||
model = "DENX M28EVK";
|
||||
|
|
@ -92,26 +92,26 @@
|
|||
hog_pins_a: hog@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
|
||||
0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */
|
||||
0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */
|
||||
0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */
|
||||
0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */
|
||||
MX28_PAD_PWM3__GPIO_3_28
|
||||
MX28_PAD_AUART2_CTS__GPIO_3_10
|
||||
MX28_PAD_AUART2_RTS__GPIO_3_11
|
||||
MX28_PAD_AUART3_RX__GPIO_3_12
|
||||
MX28_PAD_AUART3_TX__GPIO_3_13
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
lcdif_pins_m28: lcdif-m28@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x11e0 /* MX28_PAD_LCD_DOTCLK__LCD_DOTCLK */
|
||||
0x11f0 /* MX28_PAD_LCD_ENABLE__LCD_ENABLE */
|
||||
MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
|
||||
MX28_PAD_LCD_ENABLE__LCD_ENABLE
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,506 @@
|
|||
/*
|
||||
* Header providing constants for i.MX28 pinctrl bindings.
|
||||
*
|
||||
* Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
#ifndef __DT_BINDINGS_MX28_PINCTRL_H__
|
||||
#define __DT_BINDINGS_MX28_PINCTRL_H__
|
||||
|
||||
#include "mxs-pinfunc.h"
|
||||
|
||||
#define MX28_PAD_GPMI_D00__GPMI_D0 0x0000
|
||||
#define MX28_PAD_GPMI_D01__GPMI_D1 0x0010
|
||||
#define MX28_PAD_GPMI_D02__GPMI_D2 0x0020
|
||||
#define MX28_PAD_GPMI_D03__GPMI_D3 0x0030
|
||||
#define MX28_PAD_GPMI_D04__GPMI_D4 0x0040
|
||||
#define MX28_PAD_GPMI_D05__GPMI_D5 0x0050
|
||||
#define MX28_PAD_GPMI_D06__GPMI_D6 0x0060
|
||||
#define MX28_PAD_GPMI_D07__GPMI_D7 0x0070
|
||||
#define MX28_PAD_GPMI_CE0N__GPMI_CE0N 0x0100
|
||||
#define MX28_PAD_GPMI_CE1N__GPMI_CE1N 0x0110
|
||||
#define MX28_PAD_GPMI_CE2N__GPMI_CE2N 0x0120
|
||||
#define MX28_PAD_GPMI_CE3N__GPMI_CE3N 0x0130
|
||||
#define MX28_PAD_GPMI_RDY0__GPMI_READY0 0x0140
|
||||
#define MX28_PAD_GPMI_RDY1__GPMI_READY1 0x0150
|
||||
#define MX28_PAD_GPMI_RDY2__GPMI_READY2 0x0160
|
||||
#define MX28_PAD_GPMI_RDY3__GPMI_READY3 0x0170
|
||||
#define MX28_PAD_GPMI_RDN__GPMI_RDN 0x0180
|
||||
#define MX28_PAD_GPMI_WRN__GPMI_WRN 0x0190
|
||||
#define MX28_PAD_GPMI_ALE__GPMI_ALE 0x01a0
|
||||
#define MX28_PAD_GPMI_CLE__GPMI_CLE 0x01b0
|
||||
#define MX28_PAD_GPMI_RESETN__GPMI_RESETN 0x01c0
|
||||
#define MX28_PAD_LCD_D00__LCD_D0 0x1000
|
||||
#define MX28_PAD_LCD_D01__LCD_D1 0x1010
|
||||
#define MX28_PAD_LCD_D02__LCD_D2 0x1020
|
||||
#define MX28_PAD_LCD_D03__LCD_D3 0x1030
|
||||
#define MX28_PAD_LCD_D04__LCD_D4 0x1040
|
||||
#define MX28_PAD_LCD_D05__LCD_D5 0x1050
|
||||
#define MX28_PAD_LCD_D06__LCD_D6 0x1060
|
||||
#define MX28_PAD_LCD_D07__LCD_D7 0x1070
|
||||
#define MX28_PAD_LCD_D08__LCD_D8 0x1080
|
||||
#define MX28_PAD_LCD_D09__LCD_D9 0x1090
|
||||
#define MX28_PAD_LCD_D10__LCD_D10 0x10a0
|
||||
#define MX28_PAD_LCD_D11__LCD_D11 0x10b0
|
||||
#define MX28_PAD_LCD_D12__LCD_D12 0x10c0
|
||||
#define MX28_PAD_LCD_D13__LCD_D13 0x10d0
|
||||
#define MX28_PAD_LCD_D14__LCD_D14 0x10e0
|
||||
#define MX28_PAD_LCD_D15__LCD_D15 0x10f0
|
||||
#define MX28_PAD_LCD_D16__LCD_D16 0x1100
|
||||
#define MX28_PAD_LCD_D17__LCD_D17 0x1110
|
||||
#define MX28_PAD_LCD_D18__LCD_D18 0x1120
|
||||
#define MX28_PAD_LCD_D19__LCD_D19 0x1130
|
||||
#define MX28_PAD_LCD_D20__LCD_D20 0x1140
|
||||
#define MX28_PAD_LCD_D21__LCD_D21 0x1150
|
||||
#define MX28_PAD_LCD_D22__LCD_D22 0x1160
|
||||
#define MX28_PAD_LCD_D23__LCD_D23 0x1170
|
||||
#define MX28_PAD_LCD_RD_E__LCD_RD_E 0x1180
|
||||
#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN 0x1190
|
||||
#define MX28_PAD_LCD_RS__LCD_RS 0x11a0
|
||||
#define MX28_PAD_LCD_CS__LCD_CS 0x11b0
|
||||
#define MX28_PAD_LCD_VSYNC__LCD_VSYNC 0x11c0
|
||||
#define MX28_PAD_LCD_HSYNC__LCD_HSYNC 0x11d0
|
||||
#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK 0x11e0
|
||||
#define MX28_PAD_LCD_ENABLE__LCD_ENABLE 0x11f0
|
||||
#define MX28_PAD_SSP0_DATA0__SSP0_D0 0x2000
|
||||
#define MX28_PAD_SSP0_DATA1__SSP0_D1 0x2010
|
||||
#define MX28_PAD_SSP0_DATA2__SSP0_D2 0x2020
|
||||
#define MX28_PAD_SSP0_DATA3__SSP0_D3 0x2030
|
||||
#define MX28_PAD_SSP0_DATA4__SSP0_D4 0x2040
|
||||
#define MX28_PAD_SSP0_DATA5__SSP0_D5 0x2050
|
||||
#define MX28_PAD_SSP0_DATA6__SSP0_D6 0x2060
|
||||
#define MX28_PAD_SSP0_DATA7__SSP0_D7 0x2070
|
||||
#define MX28_PAD_SSP0_CMD__SSP0_CMD 0x2080
|
||||
#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT 0x2090
|
||||
#define MX28_PAD_SSP0_SCK__SSP0_SCK 0x20a0
|
||||
#define MX28_PAD_SSP1_SCK__SSP1_SCK 0x20c0
|
||||
#define MX28_PAD_SSP1_CMD__SSP1_CMD 0x20d0
|
||||
#define MX28_PAD_SSP1_DATA0__SSP1_D0 0x20e0
|
||||
#define MX28_PAD_SSP1_DATA3__SSP1_D3 0x20f0
|
||||
#define MX28_PAD_SSP2_SCK__SSP2_SCK 0x2100
|
||||
#define MX28_PAD_SSP2_MOSI__SSP2_CMD 0x2110
|
||||
#define MX28_PAD_SSP2_MISO__SSP2_D0 0x2120
|
||||
#define MX28_PAD_SSP2_SS0__SSP2_D3 0x2130
|
||||
#define MX28_PAD_SSP2_SS1__SSP2_D4 0x2140
|
||||
#define MX28_PAD_SSP2_SS2__SSP2_D5 0x2150
|
||||
#define MX28_PAD_SSP3_SCK__SSP3_SCK 0x2180
|
||||
#define MX28_PAD_SSP3_MOSI__SSP3_CMD 0x2190
|
||||
#define MX28_PAD_SSP3_MISO__SSP3_D0 0x21a0
|
||||
#define MX28_PAD_SSP3_SS0__SSP3_D3 0x21b0
|
||||
#define MX28_PAD_AUART0_RX__AUART0_RX 0x3000
|
||||
#define MX28_PAD_AUART0_TX__AUART0_TX 0x3010
|
||||
#define MX28_PAD_AUART0_CTS__AUART0_CTS 0x3020
|
||||
#define MX28_PAD_AUART0_RTS__AUART0_RTS 0x3030
|
||||
#define MX28_PAD_AUART1_RX__AUART1_RX 0x3040
|
||||
#define MX28_PAD_AUART1_TX__AUART1_TX 0x3050
|
||||
#define MX28_PAD_AUART1_CTS__AUART1_CTS 0x3060
|
||||
#define MX28_PAD_AUART1_RTS__AUART1_RTS 0x3070
|
||||
#define MX28_PAD_AUART2_RX__AUART2_RX 0x3080
|
||||
#define MX28_PAD_AUART2_TX__AUART2_TX 0x3090
|
||||
#define MX28_PAD_AUART2_CTS__AUART2_CTS 0x30a0
|
||||
#define MX28_PAD_AUART2_RTS__AUART2_RTS 0x30b0
|
||||
#define MX28_PAD_AUART3_RX__AUART3_RX 0x30c0
|
||||
#define MX28_PAD_AUART3_TX__AUART3_TX 0x30d0
|
||||
#define MX28_PAD_AUART3_CTS__AUART3_CTS 0x30e0
|
||||
#define MX28_PAD_AUART3_RTS__AUART3_RTS 0x30f0
|
||||
#define MX28_PAD_PWM0__PWM_0 0x3100
|
||||
#define MX28_PAD_PWM1__PWM_1 0x3110
|
||||
#define MX28_PAD_PWM2__PWM_2 0x3120
|
||||
#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK 0x3140
|
||||
#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK 0x3150
|
||||
#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK 0x3160
|
||||
#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 0x3170
|
||||
#define MX28_PAD_I2C0_SCL__I2C0_SCL 0x3180
|
||||
#define MX28_PAD_I2C0_SDA__I2C0_SDA 0x3190
|
||||
#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 0x31a0
|
||||
#define MX28_PAD_SPDIF__SPDIF_TX 0x31b0
|
||||
#define MX28_PAD_PWM3__PWM_3 0x31c0
|
||||
#define MX28_PAD_PWM4__PWM_4 0x31d0
|
||||
#define MX28_PAD_LCD_RESET__LCD_RESET 0x31e0
|
||||
#define MX28_PAD_ENET0_MDC__ENET0_MDC 0x4000
|
||||
#define MX28_PAD_ENET0_MDIO__ENET0_MDIO 0x4010
|
||||
#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN 0x4020
|
||||
#define MX28_PAD_ENET0_RXD0__ENET0_RXD0 0x4030
|
||||
#define MX28_PAD_ENET0_RXD1__ENET0_RXD1 0x4040
|
||||
#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK 0x4050
|
||||
#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN 0x4060
|
||||
#define MX28_PAD_ENET0_TXD0__ENET0_TXD0 0x4070
|
||||
#define MX28_PAD_ENET0_TXD1__ENET0_TXD1 0x4080
|
||||
#define MX28_PAD_ENET0_RXD2__ENET0_RXD2 0x4090
|
||||
#define MX28_PAD_ENET0_RXD3__ENET0_RXD3 0x40a0
|
||||
#define MX28_PAD_ENET0_TXD2__ENET0_TXD2 0x40b0
|
||||
#define MX28_PAD_ENET0_TXD3__ENET0_TXD3 0x40c0
|
||||
#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK 0x40d0
|
||||
#define MX28_PAD_ENET0_COL__ENET0_COL 0x40e0
|
||||
#define MX28_PAD_ENET0_CRS__ENET0_CRS 0x40f0
|
||||
#define MX28_PAD_ENET_CLK__CLKCTRL_ENET 0x4100
|
||||
#define MX28_PAD_JTAG_RTCK__JTAG_RTCK 0x4140
|
||||
#define MX28_PAD_EMI_D00__EMI_DATA0 0x5000
|
||||
#define MX28_PAD_EMI_D01__EMI_DATA1 0x5010
|
||||
#define MX28_PAD_EMI_D02__EMI_DATA2 0x5020
|
||||
#define MX28_PAD_EMI_D03__EMI_DATA3 0x5030
|
||||
#define MX28_PAD_EMI_D04__EMI_DATA4 0x5040
|
||||
#define MX28_PAD_EMI_D05__EMI_DATA5 0x5050
|
||||
#define MX28_PAD_EMI_D06__EMI_DATA6 0x5060
|
||||
#define MX28_PAD_EMI_D07__EMI_DATA7 0x5070
|
||||
#define MX28_PAD_EMI_D08__EMI_DATA8 0x5080
|
||||
#define MX28_PAD_EMI_D09__EMI_DATA9 0x5090
|
||||
#define MX28_PAD_EMI_D10__EMI_DATA10 0x50a0
|
||||
#define MX28_PAD_EMI_D11__EMI_DATA11 0x50b0
|
||||
#define MX28_PAD_EMI_D12__EMI_DATA12 0x50c0
|
||||
#define MX28_PAD_EMI_D13__EMI_DATA13 0x50d0
|
||||
#define MX28_PAD_EMI_D14__EMI_DATA14 0x50e0
|
||||
#define MX28_PAD_EMI_D15__EMI_DATA15 0x50f0
|
||||
#define MX28_PAD_EMI_ODT0__EMI_ODT0 0x5100
|
||||
#define MX28_PAD_EMI_DQM0__EMI_DQM0 0x5110
|
||||
#define MX28_PAD_EMI_ODT1__EMI_ODT1 0x5120
|
||||
#define MX28_PAD_EMI_DQM1__EMI_DQM1 0x5130
|
||||
#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK 0x5140
|
||||
#define MX28_PAD_EMI_CLK__EMI_CLK 0x5150
|
||||
#define MX28_PAD_EMI_DQS0__EMI_DQS0 0x5160
|
||||
#define MX28_PAD_EMI_DQS1__EMI_DQS1 0x5170
|
||||
#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN 0x51a0
|
||||
#define MX28_PAD_EMI_A00__EMI_ADDR0 0x6000
|
||||
#define MX28_PAD_EMI_A01__EMI_ADDR1 0x6010
|
||||
#define MX28_PAD_EMI_A02__EMI_ADDR2 0x6020
|
||||
#define MX28_PAD_EMI_A03__EMI_ADDR3 0x6030
|
||||
#define MX28_PAD_EMI_A04__EMI_ADDR4 0x6040
|
||||
#define MX28_PAD_EMI_A05__EMI_ADDR5 0x6050
|
||||
#define MX28_PAD_EMI_A06__EMI_ADDR6 0x6060
|
||||
#define MX28_PAD_EMI_A07__EMI_ADDR7 0x6070
|
||||
#define MX28_PAD_EMI_A08__EMI_ADDR8 0x6080
|
||||
#define MX28_PAD_EMI_A09__EMI_ADDR9 0x6090
|
||||
#define MX28_PAD_EMI_A10__EMI_ADDR10 0x60a0
|
||||
#define MX28_PAD_EMI_A11__EMI_ADDR11 0x60b0
|
||||
#define MX28_PAD_EMI_A12__EMI_ADDR12 0x60c0
|
||||
#define MX28_PAD_EMI_A13__EMI_ADDR13 0x60d0
|
||||
#define MX28_PAD_EMI_A14__EMI_ADDR14 0x60e0
|
||||
#define MX28_PAD_EMI_BA0__EMI_BA0 0x6100
|
||||
#define MX28_PAD_EMI_BA1__EMI_BA1 0x6110
|
||||
#define MX28_PAD_EMI_BA2__EMI_BA2 0x6120
|
||||
#define MX28_PAD_EMI_CASN__EMI_CASN 0x6130
|
||||
#define MX28_PAD_EMI_RASN__EMI_RASN 0x6140
|
||||
#define MX28_PAD_EMI_WEN__EMI_WEN 0x6150
|
||||
#define MX28_PAD_EMI_CE0N__EMI_CE0N 0x6160
|
||||
#define MX28_PAD_EMI_CE1N__EMI_CE1N 0x6170
|
||||
#define MX28_PAD_EMI_CKE__EMI_CKE 0x6180
|
||||
#define MX28_PAD_GPMI_D00__SSP1_D0 0x0001
|
||||
#define MX28_PAD_GPMI_D01__SSP1_D1 0x0011
|
||||
#define MX28_PAD_GPMI_D02__SSP1_D2 0x0021
|
||||
#define MX28_PAD_GPMI_D03__SSP1_D3 0x0031
|
||||
#define MX28_PAD_GPMI_D04__SSP1_D4 0x0041
|
||||
#define MX28_PAD_GPMI_D05__SSP1_D5 0x0051
|
||||
#define MX28_PAD_GPMI_D06__SSP1_D6 0x0061
|
||||
#define MX28_PAD_GPMI_D07__SSP1_D7 0x0071
|
||||
#define MX28_PAD_GPMI_CE0N__SSP3_D0 0x0101
|
||||
#define MX28_PAD_GPMI_CE1N__SSP3_D3 0x0111
|
||||
#define MX28_PAD_GPMI_CE2N__CAN1_TX 0x0121
|
||||
#define MX28_PAD_GPMI_CE3N__CAN1_RX 0x0131
|
||||
#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT 0x0141
|
||||
#define MX28_PAD_GPMI_RDY1__SSP1_CMD 0x0151
|
||||
#define MX28_PAD_GPMI_RDY2__CAN0_TX 0x0161
|
||||
#define MX28_PAD_GPMI_RDY3__CAN0_RX 0x0171
|
||||
#define MX28_PAD_GPMI_RDN__SSP3_SCK 0x0181
|
||||
#define MX28_PAD_GPMI_WRN__SSP1_SCK 0x0191
|
||||
#define MX28_PAD_GPMI_ALE__SSP3_D1 0x01a1
|
||||
#define MX28_PAD_GPMI_CLE__SSP3_D2 0x01b1
|
||||
#define MX28_PAD_GPMI_RESETN__SSP3_CMD 0x01c1
|
||||
#define MX28_PAD_LCD_D03__ETM_DA8 0x1031
|
||||
#define MX28_PAD_LCD_D04__ETM_DA9 0x1041
|
||||
#define MX28_PAD_LCD_D08__ETM_DA3 0x1081
|
||||
#define MX28_PAD_LCD_D09__ETM_DA4 0x1091
|
||||
#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT 0x1141
|
||||
#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN 0x1151
|
||||
#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT 0x1161
|
||||
#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN 0x1171
|
||||
#define MX28_PAD_LCD_RD_E__LCD_VSYNC 0x1181
|
||||
#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC 0x1191
|
||||
#define MX28_PAD_LCD_RS__LCD_DOTCLK 0x11a1
|
||||
#define MX28_PAD_LCD_CS__LCD_ENABLE 0x11b1
|
||||
#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0 0x11c1
|
||||
#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1 0x11d1
|
||||
#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK 0x11e1
|
||||
#define MX28_PAD_SSP0_DATA4__SSP2_D0 0x2041
|
||||
#define MX28_PAD_SSP0_DATA5__SSP2_D3 0x2051
|
||||
#define MX28_PAD_SSP0_DATA6__SSP2_CMD 0x2061
|
||||
#define MX28_PAD_SSP0_DATA7__SSP2_SCK 0x2071
|
||||
#define MX28_PAD_SSP1_SCK__SSP2_D1 0x20c1
|
||||
#define MX28_PAD_SSP1_CMD__SSP2_D2 0x20d1
|
||||
#define MX28_PAD_SSP1_DATA0__SSP2_D6 0x20e1
|
||||
#define MX28_PAD_SSP1_DATA3__SSP2_D7 0x20f1
|
||||
#define MX28_PAD_SSP2_SCK__AUART2_RX 0x2101
|
||||
#define MX28_PAD_SSP2_MOSI__AUART2_TX 0x2111
|
||||
#define MX28_PAD_SSP2_MISO__AUART3_RX 0x2121
|
||||
#define MX28_PAD_SSP2_SS0__AUART3_TX 0x2131
|
||||
#define MX28_PAD_SSP2_SS1__SSP2_D1 0x2141
|
||||
#define MX28_PAD_SSP2_SS2__SSP2_D2 0x2151
|
||||
#define MX28_PAD_SSP3_SCK__AUART4_TX 0x2181
|
||||
#define MX28_PAD_SSP3_MOSI__AUART4_RX 0x2191
|
||||
#define MX28_PAD_SSP3_MISO__AUART4_RTS 0x21a1
|
||||
#define MX28_PAD_SSP3_SS0__AUART4_CTS 0x21b1
|
||||
#define MX28_PAD_AUART0_RX__I2C0_SCL 0x3001
|
||||
#define MX28_PAD_AUART0_TX__I2C0_SDA 0x3011
|
||||
#define MX28_PAD_AUART0_CTS__AUART4_RX 0x3021
|
||||
#define MX28_PAD_AUART0_RTS__AUART4_TX 0x3031
|
||||
#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT 0x3041
|
||||
#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT 0x3051
|
||||
#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT 0x3061
|
||||
#define MX28_PAD_AUART1_RTS__USB0_ID 0x3071
|
||||
#define MX28_PAD_AUART2_RX__SSP3_D1 0x3081
|
||||
#define MX28_PAD_AUART2_TX__SSP3_D2 0x3091
|
||||
#define MX28_PAD_AUART2_CTS__I2C1_SCL 0x30a1
|
||||
#define MX28_PAD_AUART2_RTS__I2C1_SDA 0x30b1
|
||||
#define MX28_PAD_AUART3_RX__CAN0_TX 0x30c1
|
||||
#define MX28_PAD_AUART3_TX__CAN0_RX 0x30d1
|
||||
#define MX28_PAD_AUART3_CTS__CAN1_TX 0x30e1
|
||||
#define MX28_PAD_AUART3_RTS__CAN1_RX 0x30f1
|
||||
#define MX28_PAD_PWM0__I2C1_SCL 0x3101
|
||||
#define MX28_PAD_PWM1__I2C1_SDA 0x3111
|
||||
#define MX28_PAD_PWM2__USB0_ID 0x3121
|
||||
#define MX28_PAD_SAIF0_MCLK__PWM_3 0x3141
|
||||
#define MX28_PAD_SAIF0_LRCLK__PWM_4 0x3151
|
||||
#define MX28_PAD_SAIF0_BITCLK__PWM_5 0x3161
|
||||
#define MX28_PAD_SAIF0_SDATA0__PWM_6 0x3171
|
||||
#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA 0x3181
|
||||
#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB 0x3191
|
||||
#define MX28_PAD_SAIF1_SDATA0__PWM_7 0x31a1
|
||||
#define MX28_PAD_LCD_RESET__LCD_VSYNC 0x31e1
|
||||
#define MX28_PAD_ENET0_MDC__GPMI_CE4N 0x4001
|
||||
#define MX28_PAD_ENET0_MDIO__GPMI_CE5N 0x4011
|
||||
#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N 0x4021
|
||||
#define MX28_PAD_ENET0_RXD0__GPMI_CE7N 0x4031
|
||||
#define MX28_PAD_ENET0_RXD1__GPMI_READY4 0x4041
|
||||
#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER 0x4051
|
||||
#define MX28_PAD_ENET0_TX_EN__GPMI_READY5 0x4061
|
||||
#define MX28_PAD_ENET0_TXD0__GPMI_READY6 0x4071
|
||||
#define MX28_PAD_ENET0_TXD1__GPMI_READY7 0x4081
|
||||
#define MX28_PAD_ENET0_RXD2__ENET1_RXD0 0x4091
|
||||
#define MX28_PAD_ENET0_RXD3__ENET1_RXD1 0x40a1
|
||||
#define MX28_PAD_ENET0_TXD2__ENET1_TXD0 0x40b1
|
||||
#define MX28_PAD_ENET0_TXD3__ENET1_TXD1 0x40c1
|
||||
#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER 0x40d1
|
||||
#define MX28_PAD_ENET0_COL__ENET1_TX_EN 0x40e1
|
||||
#define MX28_PAD_ENET0_CRS__ENET1_RX_EN 0x40f1
|
||||
#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER 0x0122
|
||||
#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK 0x0132
|
||||
#define MX28_PAD_GPMI_RDY0__USB0_ID 0x0142
|
||||
#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER 0x0162
|
||||
#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER 0x0172
|
||||
#define MX28_PAD_GPMI_ALE__SSP3_D4 0x01a2
|
||||
#define MX28_PAD_GPMI_CLE__SSP3_D5 0x01b2
|
||||
#define MX28_PAD_LCD_D00__ETM_DA0 0x1002
|
||||
#define MX28_PAD_LCD_D01__ETM_DA1 0x1012
|
||||
#define MX28_PAD_LCD_D02__ETM_DA2 0x1022
|
||||
#define MX28_PAD_LCD_D03__ETM_DA3 0x1032
|
||||
#define MX28_PAD_LCD_D04__ETM_DA4 0x1042
|
||||
#define MX28_PAD_LCD_D05__ETM_DA5 0x1052
|
||||
#define MX28_PAD_LCD_D06__ETM_DA6 0x1062
|
||||
#define MX28_PAD_LCD_D07__ETM_DA7 0x1072
|
||||
#define MX28_PAD_LCD_D08__ETM_DA8 0x1082
|
||||
#define MX28_PAD_LCD_D09__ETM_DA9 0x1092
|
||||
#define MX28_PAD_LCD_D10__ETM_DA10 0x10a2
|
||||
#define MX28_PAD_LCD_D11__ETM_DA11 0x10b2
|
||||
#define MX28_PAD_LCD_D12__ETM_DA12 0x10c2
|
||||
#define MX28_PAD_LCD_D13__ETM_DA13 0x10d2
|
||||
#define MX28_PAD_LCD_D14__ETM_DA14 0x10e2
|
||||
#define MX28_PAD_LCD_D15__ETM_DA15 0x10f2
|
||||
#define MX28_PAD_LCD_D16__ETM_DA7 0x1102
|
||||
#define MX28_PAD_LCD_D17__ETM_DA6 0x1112
|
||||
#define MX28_PAD_LCD_D18__ETM_DA5 0x1122
|
||||
#define MX28_PAD_LCD_D19__ETM_DA4 0x1132
|
||||
#define MX28_PAD_LCD_D20__ETM_DA3 0x1142
|
||||
#define MX28_PAD_LCD_D21__ETM_DA2 0x1152
|
||||
#define MX28_PAD_LCD_D22__ETM_DA1 0x1162
|
||||
#define MX28_PAD_LCD_D23__ETM_DA0 0x1172
|
||||
#define MX28_PAD_LCD_RD_E__ETM_TCTL 0x1182
|
||||
#define MX28_PAD_LCD_WR_RWN__ETM_TCLK 0x1192
|
||||
#define MX28_PAD_LCD_HSYNC__ETM_TCTL 0x11d2
|
||||
#define MX28_PAD_LCD_DOTCLK__ETM_TCLK 0x11e2
|
||||
#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT 0x20c2
|
||||
#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN 0x20d2
|
||||
#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT 0x20e2
|
||||
#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN 0x20f2
|
||||
#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1 0x2102
|
||||
#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2 0x2112
|
||||
#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1 0x2122
|
||||
#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2 0x2132
|
||||
#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT 0x2142
|
||||
#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT 0x2152
|
||||
#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT 0x2182
|
||||
#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN 0x2192
|
||||
#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT 0x21a2
|
||||
#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN 0x21b2
|
||||
#define MX28_PAD_AUART0_RX__DUART_CTS 0x3002
|
||||
#define MX28_PAD_AUART0_TX__DUART_RTS 0x3012
|
||||
#define MX28_PAD_AUART0_CTS__DUART_RX 0x3022
|
||||
#define MX28_PAD_AUART0_RTS__DUART_TX 0x3032
|
||||
#define MX28_PAD_AUART1_RX__PWM_0 0x3042
|
||||
#define MX28_PAD_AUART1_TX__PWM_1 0x3052
|
||||
#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA 0x3062
|
||||
#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB 0x3072
|
||||
#define MX28_PAD_AUART2_RX__SSP3_D4 0x3082
|
||||
#define MX28_PAD_AUART2_TX__SSP3_D5 0x3092
|
||||
#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK 0x30a2
|
||||
#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK 0x30b2
|
||||
#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT 0x30c2
|
||||
#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN 0x30d2
|
||||
#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT 0x30e2
|
||||
#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN 0x30f2
|
||||
#define MX28_PAD_PWM0__DUART_RX 0x3102
|
||||
#define MX28_PAD_PWM1__DUART_TX 0x3112
|
||||
#define MX28_PAD_PWM2__USB1_OVERCURRENT 0x3122
|
||||
#define MX28_PAD_SAIF0_MCLK__AUART4_CTS 0x3142
|
||||
#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS 0x3152
|
||||
#define MX28_PAD_SAIF0_BITCLK__AUART4_RX 0x3162
|
||||
#define MX28_PAD_SAIF0_SDATA0__AUART4_TX 0x3172
|
||||
#define MX28_PAD_I2C0_SCL__DUART_RX 0x3182
|
||||
#define MX28_PAD_I2C0_SDA__DUART_TX 0x3192
|
||||
#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1 0x31a2
|
||||
#define MX28_PAD_SPDIF__ENET1_RX_ER 0x31b2
|
||||
#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1 0x4002
|
||||
#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2 0x4012
|
||||
#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1 0x4022
|
||||
#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2 0x4032
|
||||
#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT 0x4052
|
||||
#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT 0x4092
|
||||
#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN 0x40a2
|
||||
#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT 0x40b2
|
||||
#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN 0x40c2
|
||||
#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN 0x40d2
|
||||
#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT 0x40e2
|
||||
#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN 0x40f2
|
||||
#define MX28_PAD_GPMI_D00__GPIO_0_0 0x0003
|
||||
#define MX28_PAD_GPMI_D01__GPIO_0_1 0x0013
|
||||
#define MX28_PAD_GPMI_D02__GPIO_0_2 0x0023
|
||||
#define MX28_PAD_GPMI_D03__GPIO_0_3 0x0033
|
||||
#define MX28_PAD_GPMI_D04__GPIO_0_4 0x0043
|
||||
#define MX28_PAD_GPMI_D05__GPIO_0_5 0x0053
|
||||
#define MX28_PAD_GPMI_D06__GPIO_0_6 0x0063
|
||||
#define MX28_PAD_GPMI_D07__GPIO_0_7 0x0073
|
||||
#define MX28_PAD_GPMI_CE0N__GPIO_0_16 0x0103
|
||||
#define MX28_PAD_GPMI_CE1N__GPIO_0_17 0x0113
|
||||
#define MX28_PAD_GPMI_CE2N__GPIO_0_18 0x0123
|
||||
#define MX28_PAD_GPMI_CE3N__GPIO_0_19 0x0133
|
||||
#define MX28_PAD_GPMI_RDY0__GPIO_0_20 0x0143
|
||||
#define MX28_PAD_GPMI_RDY1__GPIO_0_21 0x0153
|
||||
#define MX28_PAD_GPMI_RDY2__GPIO_0_22 0x0163
|
||||
#define MX28_PAD_GPMI_RDY3__GPIO_0_23 0x0173
|
||||
#define MX28_PAD_GPMI_RDN__GPIO_0_24 0x0183
|
||||
#define MX28_PAD_GPMI_WRN__GPIO_0_25 0x0193
|
||||
#define MX28_PAD_GPMI_ALE__GPIO_0_26 0x01a3
|
||||
#define MX28_PAD_GPMI_CLE__GPIO_0_27 0x01b3
|
||||
#define MX28_PAD_GPMI_RESETN__GPIO_0_28 0x01c3
|
||||
#define MX28_PAD_LCD_D00__GPIO_1_0 0x1003
|
||||
#define MX28_PAD_LCD_D01__GPIO_1_1 0x1013
|
||||
#define MX28_PAD_LCD_D02__GPIO_1_2 0x1023
|
||||
#define MX28_PAD_LCD_D03__GPIO_1_3 0x1033
|
||||
#define MX28_PAD_LCD_D04__GPIO_1_4 0x1043
|
||||
#define MX28_PAD_LCD_D05__GPIO_1_5 0x1053
|
||||
#define MX28_PAD_LCD_D06__GPIO_1_6 0x1063
|
||||
#define MX28_PAD_LCD_D07__GPIO_1_7 0x1073
|
||||
#define MX28_PAD_LCD_D08__GPIO_1_8 0x1083
|
||||
#define MX28_PAD_LCD_D09__GPIO_1_9 0x1093
|
||||
#define MX28_PAD_LCD_D10__GPIO_1_10 0x10a3
|
||||
#define MX28_PAD_LCD_D11__GPIO_1_11 0x10b3
|
||||
#define MX28_PAD_LCD_D12__GPIO_1_12 0x10c3
|
||||
#define MX28_PAD_LCD_D13__GPIO_1_13 0x10d3
|
||||
#define MX28_PAD_LCD_D14__GPIO_1_14 0x10e3
|
||||
#define MX28_PAD_LCD_D15__GPIO_1_15 0x10f3
|
||||
#define MX28_PAD_LCD_D16__GPIO_1_16 0x1103
|
||||
#define MX28_PAD_LCD_D17__GPIO_1_17 0x1113
|
||||
#define MX28_PAD_LCD_D18__GPIO_1_18 0x1123
|
||||
#define MX28_PAD_LCD_D19__GPIO_1_19 0x1133
|
||||
#define MX28_PAD_LCD_D20__GPIO_1_20 0x1143
|
||||
#define MX28_PAD_LCD_D21__GPIO_1_21 0x1153
|
||||
#define MX28_PAD_LCD_D22__GPIO_1_22 0x1163
|
||||
#define MX28_PAD_LCD_D23__GPIO_1_23 0x1173
|
||||
#define MX28_PAD_LCD_RD_E__GPIO_1_24 0x1183
|
||||
#define MX28_PAD_LCD_WR_RWN__GPIO_1_25 0x1193
|
||||
#define MX28_PAD_LCD_RS__GPIO_1_26 0x11a3
|
||||
#define MX28_PAD_LCD_CS__GPIO_1_27 0x11b3
|
||||
#define MX28_PAD_LCD_VSYNC__GPIO_1_28 0x11c3
|
||||
#define MX28_PAD_LCD_HSYNC__GPIO_1_29 0x11d3
|
||||
#define MX28_PAD_LCD_DOTCLK__GPIO_1_30 0x11e3
|
||||
#define MX28_PAD_LCD_ENABLE__GPIO_1_31 0x11f3
|
||||
#define MX28_PAD_SSP0_DATA0__GPIO_2_0 0x2003
|
||||
#define MX28_PAD_SSP0_DATA1__GPIO_2_1 0x2013
|
||||
#define MX28_PAD_SSP0_DATA2__GPIO_2_2 0x2023
|
||||
#define MX28_PAD_SSP0_DATA3__GPIO_2_3 0x2033
|
||||
#define MX28_PAD_SSP0_DATA4__GPIO_2_4 0x2043
|
||||
#define MX28_PAD_SSP0_DATA5__GPIO_2_5 0x2053
|
||||
#define MX28_PAD_SSP0_DATA6__GPIO_2_6 0x2063
|
||||
#define MX28_PAD_SSP0_DATA7__GPIO_2_7 0x2073
|
||||
#define MX28_PAD_SSP0_CMD__GPIO_2_8 0x2083
|
||||
#define MX28_PAD_SSP0_DETECT__GPIO_2_9 0x2093
|
||||
#define MX28_PAD_SSP0_SCK__GPIO_2_10 0x20a3
|
||||
#define MX28_PAD_SSP1_SCK__GPIO_2_12 0x20c3
|
||||
#define MX28_PAD_SSP1_CMD__GPIO_2_13 0x20d3
|
||||
#define MX28_PAD_SSP1_DATA0__GPIO_2_14 0x20e3
|
||||
#define MX28_PAD_SSP1_DATA3__GPIO_2_15 0x20f3
|
||||
#define MX28_PAD_SSP2_SCK__GPIO_2_16 0x2103
|
||||
#define MX28_PAD_SSP2_MOSI__GPIO_2_17 0x2113
|
||||
#define MX28_PAD_SSP2_MISO__GPIO_2_18 0x2123
|
||||
#define MX28_PAD_SSP2_SS0__GPIO_2_19 0x2133
|
||||
#define MX28_PAD_SSP2_SS1__GPIO_2_20 0x2143
|
||||
#define MX28_PAD_SSP2_SS2__GPIO_2_21 0x2153
|
||||
#define MX28_PAD_SSP3_SCK__GPIO_2_24 0x2183
|
||||
#define MX28_PAD_SSP3_MOSI__GPIO_2_25 0x2193
|
||||
#define MX28_PAD_SSP3_MISO__GPIO_2_26 0x21a3
|
||||
#define MX28_PAD_SSP3_SS0__GPIO_2_27 0x21b3
|
||||
#define MX28_PAD_AUART0_RX__GPIO_3_0 0x3003
|
||||
#define MX28_PAD_AUART0_TX__GPIO_3_1 0x3013
|
||||
#define MX28_PAD_AUART0_CTS__GPIO_3_2 0x3023
|
||||
#define MX28_PAD_AUART0_RTS__GPIO_3_3 0x3033
|
||||
#define MX28_PAD_AUART1_RX__GPIO_3_4 0x3043
|
||||
#define MX28_PAD_AUART1_TX__GPIO_3_5 0x3053
|
||||
#define MX28_PAD_AUART1_CTS__GPIO_3_6 0x3063
|
||||
#define MX28_PAD_AUART1_RTS__GPIO_3_7 0x3073
|
||||
#define MX28_PAD_AUART2_RX__GPIO_3_8 0x3083
|
||||
#define MX28_PAD_AUART2_TX__GPIO_3_9 0x3093
|
||||
#define MX28_PAD_AUART2_CTS__GPIO_3_10 0x30a3
|
||||
#define MX28_PAD_AUART2_RTS__GPIO_3_11 0x30b3
|
||||
#define MX28_PAD_AUART3_RX__GPIO_3_12 0x30c3
|
||||
#define MX28_PAD_AUART3_TX__GPIO_3_13 0x30d3
|
||||
#define MX28_PAD_AUART3_CTS__GPIO_3_14 0x30e3
|
||||
#define MX28_PAD_AUART3_RTS__GPIO_3_15 0x30f3
|
||||
#define MX28_PAD_PWM0__GPIO_3_16 0x3103
|
||||
#define MX28_PAD_PWM1__GPIO_3_17 0x3113
|
||||
#define MX28_PAD_PWM2__GPIO_3_18 0x3123
|
||||
#define MX28_PAD_SAIF0_MCLK__GPIO_3_20 0x3143
|
||||
#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21 0x3153
|
||||
#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22 0x3163
|
||||
#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23 0x3173
|
||||
#define MX28_PAD_I2C0_SCL__GPIO_3_24 0x3183
|
||||
#define MX28_PAD_I2C0_SDA__GPIO_3_25 0x3193
|
||||
#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26 0x31a3
|
||||
#define MX28_PAD_SPDIF__GPIO_3_27 0x31b3
|
||||
#define MX28_PAD_PWM3__GPIO_3_28 0x31c3
|
||||
#define MX28_PAD_PWM4__GPIO_3_29 0x31d3
|
||||
#define MX28_PAD_LCD_RESET__GPIO_3_30 0x31e3
|
||||
#define MX28_PAD_ENET0_MDC__GPIO_4_0 0x4003
|
||||
#define MX28_PAD_ENET0_MDIO__GPIO_4_1 0x4013
|
||||
#define MX28_PAD_ENET0_RX_EN__GPIO_4_2 0x4023
|
||||
#define MX28_PAD_ENET0_RXD0__GPIO_4_3 0x4033
|
||||
#define MX28_PAD_ENET0_RXD1__GPIO_4_4 0x4043
|
||||
#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5 0x4053
|
||||
#define MX28_PAD_ENET0_TX_EN__GPIO_4_6 0x4063
|
||||
#define MX28_PAD_ENET0_TXD0__GPIO_4_7 0x4073
|
||||
#define MX28_PAD_ENET0_TXD1__GPIO_4_8 0x4083
|
||||
#define MX28_PAD_ENET0_RXD2__GPIO_4_9 0x4093
|
||||
#define MX28_PAD_ENET0_RXD3__GPIO_4_10 0x40a3
|
||||
#define MX28_PAD_ENET0_TXD2__GPIO_4_11 0x40b3
|
||||
#define MX28_PAD_ENET0_TXD3__GPIO_4_12 0x40c3
|
||||
#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13 0x40d3
|
||||
#define MX28_PAD_ENET0_COL__GPIO_4_14 0x40e3
|
||||
#define MX28_PAD_ENET0_CRS__GPIO_4_15 0x40f3
|
||||
#define MX28_PAD_ENET_CLK__GPIO_4_16 0x4103
|
||||
#define MX28_PAD_JTAG_RTCK__GPIO_4_20 0x4143
|
||||
|
||||
#endif /* __DT_BINDINGS_MX28_PINCTRL_H__ */
|
||||
|
|
@ -10,7 +10,7 @@
|
|||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "imx28.dtsi"
|
||||
#include "imx28.dtsi"
|
||||
|
||||
/ {
|
||||
model = "SchulerControl GmbH, SC SPS 1";
|
||||
|
|
@ -29,13 +29,13 @@
|
|||
hog_pins_a: hog-gpios@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0003 /* MX28_PAD_GPMI_D00__GPIO_0_0 */
|
||||
0x0033 /* MX28_PAD_GPMI_D03__GPIO_0_3 */
|
||||
0x0063 /* MX28_PAD_GPMI_D06__GPIO_0_6 */
|
||||
MX28_PAD_GPMI_D00__GPIO_0_0
|
||||
MX28_PAD_GPMI_D03__GPIO_0_3
|
||||
MX28_PAD_GPMI_D06__GPIO_0_6
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,106 +1,139 @@
|
|||
/*
|
||||
* Copyright 2012 Shawn Guo <shawn.guo@linaro.org>
|
||||
* Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "imx28.dtsi"
|
||||
#include "imx28.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
model = "Ka-Ro electronics TX28 module";
|
||||
compatible = "karo,tx28", "fsl,imx28";
|
||||
|
||||
aliases {
|
||||
can0 = &can0;
|
||||
can1 = &can1;
|
||||
display = &display;
|
||||
ds1339 = &ds1339;
|
||||
gpio5 = &gpio5;
|
||||
lcdif = &lcdif;
|
||||
lcdif_23bit_pins = &tx28_lcdif_23bit_pins;
|
||||
lcdif_24bit_pins = &lcdif_24bit_pins_a;
|
||||
stk5led = &user_led;
|
||||
usbotg = &usb0;
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x40000000 0x08000000>;
|
||||
reg = <0 0>; /* will be filled in by U-Boot */
|
||||
};
|
||||
|
||||
apb@80000000 {
|
||||
apbh@80000000 {
|
||||
ssp0: ssp@80010000 {
|
||||
compatible = "fsl,imx28-mmc";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_4bit_pins_a
|
||||
&mmc0_cd_cfg
|
||||
&mmc0_sck_cfg>;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
onewire {
|
||||
compatible = "w1-gpio";
|
||||
gpios = <&gpio2 7 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pinctrl@80018000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hog_pins_a>;
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
|
||||
hog_pins_a: hog@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
|
||||
mac0_pins_gpio: mac0-gpio-mode@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x4003 /* MX28_PAD_ENET0_MDC__GPIO_4_0 */
|
||||
0x4013 /* MX28_PAD_ENET0_MDIO__GPIO_4_1 */
|
||||
0x4023 /* MX28_PAD_ENET0_RX_EN__GPIO_4_2 */
|
||||
0x4033 /* MX28_PAD_ENET0_RXD0__GPIO_4_3 */
|
||||
0x4043 /* MX28_PAD_ENET0_RXD1__GPIO_4_4 */
|
||||
0x4063 /* MX28_PAD_ENET0_TX_EN__GPIO_4_6 */
|
||||
0x4073 /* MX28_PAD_ENET0_TXD0__GPIO_4_7 */
|
||||
0x4083 /* MX28_PAD_ENET0_TXD1__GPIO_4_8 */
|
||||
0x4103 /* MX28_PAD_ENET_CLK__GPIO_4_16 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
};
|
||||
reg_usb0_vbus: usb0_vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb0_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio0 18 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
apbx@80040000 {
|
||||
i2c0: i2c@80058000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins_a>;
|
||||
status = "okay";
|
||||
reg_usb1_vbus: usb1_vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb1_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio3 27 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
ds1339: rtc@68 {
|
||||
compatible = "mxim,ds1339";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
reg_2p5v: 2p5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "2P5V";
|
||||
regulator-min-microvolt = <2500000>;
|
||||
regulator-max-microvolt = <2500000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
pwm: pwm@80064000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm0_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
reg_3p3v: 3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
duart: serial@80074000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&duart_4pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
reg_can_xcvr: can-xcvr {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "CAN XCVR";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio1 0 0>;
|
||||
enable-active-low;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
|
||||
};
|
||||
|
||||
auart1: serial@8006c000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&auart1_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
reg_lcd: lcd-power {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "LCD POWER";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio1 31 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_lcd_reset: lcd-reset {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "LCD RESET";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio3 30 0>;
|
||||
startup-delay-us = <300000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
ahb@80080000 {
|
||||
mac0: ethernet@800f0000 {
|
||||
phy-mode = "rmii";
|
||||
pinctrl-names = "default", "gpio_mode";
|
||||
pinctrl-0 = <&mac0_pins_a>;
|
||||
pinctrl-1 = <&mac0_pins_gpio>;
|
||||
status = "okay";
|
||||
clocks {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
mclk: clock@0 {
|
||||
compatible = "fixed-clock";
|
||||
reg = <0>;
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <27000000>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "fsl,imx28-tx28-sgtl5000",
|
||||
"fsl,mxs-audio-sgtl5000";
|
||||
model = "imx28-tx28-sgtl5000";
|
||||
saif-controllers = <&saif0 &saif1>;
|
||||
audio-codec = <&sgtl5000>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
user {
|
||||
user_led: user {
|
||||
label = "Heartbeat";
|
||||
gpios = <&gpio4 10 0>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
|
|
@ -109,8 +142,512 @@
|
|||
|
||||
backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm 0 5000000>;
|
||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <6>;
|
||||
pwms = <&pwm 0 500000>;
|
||||
/*
|
||||
* a silly way to create a 1:1 relationship between the
|
||||
* PWM value and the actual duty cycle
|
||||
*/
|
||||
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
|
||||
10 11 12 13 14 15 16 17 18 19
|
||||
20 21 22 23 24 25 26 27 28 29
|
||||
30 31 32 33 34 35 36 37 38 39
|
||||
40 41 42 43 44 45 46 47 48 49
|
||||
50 51 52 53 54 55 56 57 58 59
|
||||
60 61 62 63 64 65 66 67 68 69
|
||||
70 71 72 73 74 75 76 77 78 79
|
||||
80 81 82 83 84 85 86 87 88 89
|
||||
90 91 92 93 94 95 96 97 98 99
|
||||
100>;
|
||||
default-brightness-level = <50>;
|
||||
};
|
||||
|
||||
matrix_keypad: matrix-keypad@0 {
|
||||
compatible = "gpio-matrix-keypad";
|
||||
col-gpios = <
|
||||
&gpio5 0 0
|
||||
&gpio5 1 0
|
||||
&gpio5 2 0
|
||||
&gpio5 3 0
|
||||
>;
|
||||
row-gpios = <
|
||||
&gpio5 4 0
|
||||
&gpio5 5 0
|
||||
&gpio5 6 0
|
||||
&gpio5 7 0
|
||||
>;
|
||||
/* sample keymap */
|
||||
linux,keymap = <
|
||||
0x00000074 /* row 0, col 0, KEY_POWER */
|
||||
0x00010052 /* row 0, col 1, KEY_KP0 */
|
||||
0x0002004f /* row 0, col 2, KEY_KP1 */
|
||||
0x00030050 /* row 0, col 3, KEY_KP2 */
|
||||
0x01000051 /* row 1, col 0, KEY_KP3 */
|
||||
0x0101004b /* row 1, col 1, KEY_KP4 */
|
||||
0x0102004c /* row 1, col 2, KEY_KP5 */
|
||||
0x0103004d /* row 1, col 3, KEY_KP6 */
|
||||
0x02000047 /* row 2, col 0, KEY_KP7 */
|
||||
0x02010048 /* row 2, col 1, KEY_KP8 */
|
||||
0x02020049 /* row 2, col 2, KEY_KP9 */
|
||||
>;
|
||||
gpio-activelow;
|
||||
linux,wakeup;
|
||||
debounce-delay-ms = <100>;
|
||||
col-scan-delay-us = <5000>;
|
||||
linux,no-autorepeat;
|
||||
};
|
||||
};
|
||||
|
||||
/* 2nd TX-Std UART - (A)UART1 */
|
||||
&auart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&auart1_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* 3rd TX-Std UART - (A)UART3 */
|
||||
&auart3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&auart3_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&can0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&can0_pins_a>;
|
||||
xceiver-supply = <®_can_xcvr>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&can1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&can1_pins_a>;
|
||||
xceiver-supply = <®_can_xcvr>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&digctl {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* 1st TX-Std UART - (D)UART */
|
||||
&duart {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&duart_4pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpmi {
|
||||
pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
|
||||
nand-on-flash-bbt;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins_a>;
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
sgtl5000: sgtl5000@0a {
|
||||
compatible = "fsl,sgtl5000";
|
||||
reg = <0x0a>;
|
||||
VDDA-supply = <®_2p5v>;
|
||||
VDDIO-supply = <®_3p3v>;
|
||||
clocks = <&mclk>;
|
||||
};
|
||||
|
||||
gpio5: pca953x@20 {
|
||||
compatible = "nxp,pca9554";
|
||||
reg = <0x20>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tx28_pca9554_pins>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <28 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
polytouch: edt-ft5x06@38 {
|
||||
compatible = "edt,edt-ft5x06";
|
||||
reg = <0x38>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tx28_edt_ft5x06_pins>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <5 0>;
|
||||
reset-gpios = <&gpio2 6 1>;
|
||||
wake-gpios = <&gpio4 9 0>;
|
||||
};
|
||||
|
||||
touchscreen: tsc2007@48 {
|
||||
compatible = "ti,tsc2007";
|
||||
reg = <0x48>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tx28_tsc2007_pins>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <20 0>;
|
||||
pendown-gpio = <&gpio3 20 1>;
|
||||
ti,x-plate-ohms = /bits/ 16 <660>;
|
||||
};
|
||||
|
||||
ds1339: rtc@68 {
|
||||
compatible = "mxim,ds1339";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
&lcdif {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_sync_pins_a &tx28_lcdif_ctrl_pins>;
|
||||
lcd-supply = <®_lcd>;
|
||||
display = <&display>;
|
||||
status = "okay";
|
||||
|
||||
display: display@0 {
|
||||
bits-per-pixel = <32>;
|
||||
bus-width = <24>;
|
||||
display-timings {
|
||||
native-mode = <&timing5>;
|
||||
timing0: timing0 {
|
||||
panel-name = "VGA";
|
||||
clock-frequency = <25175000>;
|
||||
hactive = <640>;
|
||||
vactive = <480>;
|
||||
hback-porch = <48>;
|
||||
hsync-len = <96>;
|
||||
hfront-porch = <16>;
|
||||
vback-porch = <33>;
|
||||
vsync-len = <2>;
|
||||
vfront-porch = <10>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <1>;
|
||||
};
|
||||
|
||||
timing1: timing1 {
|
||||
panel-name = "ETV570";
|
||||
clock-frequency = <25175000>;
|
||||
hactive = <640>;
|
||||
vactive = <480>;
|
||||
hback-porch = <114>;
|
||||
hsync-len = <30>;
|
||||
hfront-porch = <16>;
|
||||
vback-porch = <32>;
|
||||
vsync-len = <3>;
|
||||
vfront-porch = <10>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <1>;
|
||||
};
|
||||
|
||||
timing2: timing2 {
|
||||
panel-name = "ET0350";
|
||||
clock-frequency = <6500000>;
|
||||
hactive = <320>;
|
||||
vactive = <240>;
|
||||
hback-porch = <34>;
|
||||
hsync-len = <34>;
|
||||
hfront-porch = <20>;
|
||||
vback-porch = <15>;
|
||||
vsync-len = <3>;
|
||||
vfront-porch = <4>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <1>;
|
||||
};
|
||||
|
||||
timing3: timing3 {
|
||||
panel-name = "ET0430";
|
||||
clock-frequency = <9000000>;
|
||||
hactive = <480>;
|
||||
vactive = <272>;
|
||||
hback-porch = <2>;
|
||||
hsync-len = <41>;
|
||||
hfront-porch = <2>;
|
||||
vback-porch = <2>;
|
||||
vsync-len = <10>;
|
||||
vfront-porch = <2>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <1>;
|
||||
};
|
||||
|
||||
timing4: timing4 {
|
||||
panel-name = "ET0500", "ET0700";
|
||||
clock-frequency = <33260000>;
|
||||
hactive = <800>;
|
||||
vactive = <480>;
|
||||
hback-porch = <88>;
|
||||
hsync-len = <128>;
|
||||
hfront-porch = <40>;
|
||||
vback-porch = <33>;
|
||||
vsync-len = <2>;
|
||||
vfront-porch = <10>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <1>;
|
||||
};
|
||||
|
||||
timing5: timing5 {
|
||||
panel-name = "ETQ570";
|
||||
clock-frequency = <6400000>;
|
||||
hactive = <320>;
|
||||
vactive = <240>;
|
||||
hback-porch = <38>;
|
||||
hsync-len = <30>;
|
||||
hfront-porch = <30>;
|
||||
vback-porch = <16>;
|
||||
vsync-len = <3>;
|
||||
vfront-porch = <4>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&lradc {
|
||||
fsl,lradc-touchscreen-wires = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mac0 {
|
||||
phy-mode = "rmii";
|
||||
pinctrl-names = "default", "gpio_mode";
|
||||
pinctrl-0 = <&mac0_pins_a>;
|
||||
pinctrl-1 = <&tx28_mac0_pins_gpio>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mac1 {
|
||||
phy-mode = "rmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mac1_pins_a>;
|
||||
/* not enabled by default */
|
||||
};
|
||||
|
||||
&mxs_rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ocotp {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm0_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hog_pins_a>;
|
||||
|
||||
hog_pins_a: hog@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_ENET0_RXD3__GPIO_4_10 /* module LED */
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
tx28_edt_ft5x06_pins: tx28-edt-ft5x06-pins {
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_SSP0_DATA6__GPIO_2_6 /* RESET */
|
||||
MX28_PAD_SSP0_DATA5__GPIO_2_5 /* IRQ */
|
||||
MX28_PAD_ENET0_RXD2__GPIO_4_9 /* WAKE */
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
tx28_flexcan_xcvr_pins: tx28-flexcan-xcvr-pins {
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_LCD_D00__GPIO_1_0
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
tx28_lcdif_23bit_pins: tx28-lcdif-23bit {
|
||||
fsl,pinmux-ids = <
|
||||
/* LCD_D00 may be used as Flexcan Transceiver Enable on STK5-V5 */
|
||||
MX28_PAD_LCD_D01__LCD_D1
|
||||
MX28_PAD_LCD_D02__LCD_D2
|
||||
MX28_PAD_LCD_D03__LCD_D3
|
||||
MX28_PAD_LCD_D04__LCD_D4
|
||||
MX28_PAD_LCD_D05__LCD_D5
|
||||
MX28_PAD_LCD_D06__LCD_D6
|
||||
MX28_PAD_LCD_D07__LCD_D7
|
||||
MX28_PAD_LCD_D08__LCD_D8
|
||||
MX28_PAD_LCD_D09__LCD_D9
|
||||
MX28_PAD_LCD_D10__LCD_D10
|
||||
MX28_PAD_LCD_D11__LCD_D11
|
||||
MX28_PAD_LCD_D12__LCD_D12
|
||||
MX28_PAD_LCD_D13__LCD_D13
|
||||
MX28_PAD_LCD_D14__LCD_D14
|
||||
MX28_PAD_LCD_D15__LCD_D15
|
||||
MX28_PAD_LCD_D16__LCD_D16
|
||||
MX28_PAD_LCD_D17__LCD_D17
|
||||
MX28_PAD_LCD_D18__LCD_D18
|
||||
MX28_PAD_LCD_D19__LCD_D19
|
||||
MX28_PAD_LCD_D20__LCD_D20
|
||||
MX28_PAD_LCD_D21__LCD_D21
|
||||
MX28_PAD_LCD_D22__LCD_D22
|
||||
MX28_PAD_LCD_D23__LCD_D23
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
tx28_lcdif_ctrl_pins: tx28-lcdif-ctrl {
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_LCD_ENABLE__GPIO_1_31 /* Enable */
|
||||
MX28_PAD_LCD_RESET__GPIO_3_30 /* Reset */
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
tx28_mac0_pins_gpio: tx28-mac0-gpio-pins {
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_ENET0_MDC__GPIO_4_0
|
||||
MX28_PAD_ENET0_MDIO__GPIO_4_1
|
||||
MX28_PAD_ENET0_RX_EN__GPIO_4_2
|
||||
MX28_PAD_ENET0_RXD0__GPIO_4_3
|
||||
MX28_PAD_ENET0_RXD1__GPIO_4_4
|
||||
MX28_PAD_ENET0_TX_EN__GPIO_4_6
|
||||
MX28_PAD_ENET0_TXD0__GPIO_4_7
|
||||
MX28_PAD_ENET0_TXD1__GPIO_4_8
|
||||
MX28_PAD_ENET_CLK__GPIO_4_16
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
tx28_pca9554_pins: tx28-pca9554-pins {
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_PWM3__GPIO_3_28
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
tx28_tsc2007_pins: tx28-tsc2007-pins {
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
|
||||
tx28_usbphy0_pins: tx28-usbphy0-pins {
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_GPMI_CE2N__GPIO_0_18 /* USBOTG_VBUSEN */
|
||||
MX28_PAD_GPMI_CE3N__GPIO_0_19 /* USBOTH_OC */
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_12mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
tx28_usbphy1_pins: tx28-usbphy1-pins {
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_SPDIF__GPIO_3_27 /* USBH_VBUSEN */
|
||||
MX28_PAD_JTAG_RTCK__GPIO_4_20 /* USBH_OC */
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_12mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
};
|
||||
|
||||
&saif0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&saif0_pins_b>;
|
||||
fsl,saif-master;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saif1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&saif1_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssp0 {
|
||||
compatible = "fsl,imx28-mmc";
|
||||
pinctrl-names = "default", "special";
|
||||
pinctrl-0 = <&mmc0_4bit_pins_a
|
||||
&mmc0_cd_cfg
|
||||
&mmc0_sck_cfg>;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssp3 {
|
||||
compatible = "fsl,imx28-spi";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi3_pins_a>;
|
||||
clock-frequency = <57600000>;
|
||||
status = "okay";
|
||||
|
||||
spidev0: spi@0 {
|
||||
compatible = "spidev";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <57600000>;
|
||||
};
|
||||
|
||||
spidev1: spi@1 {
|
||||
compatible = "spidev";
|
||||
reg = <1>;
|
||||
spi-max-frequency = <57600000>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
vbus-supply = <®_usb0_vbus>;
|
||||
disable-over-current;
|
||||
dr_mode = "peripheral";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
vbus-supply = <®_usb1_vbus>;
|
||||
disable-over-current;
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tx28_usbphy0_pins>;
|
||||
phy_type = "utmi";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tx28_usbphy1_pins>;
|
||||
phy_type = "utmi";
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -9,7 +9,8 @@
|
|||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
/include/ "skeleton.dtsi"
|
||||
#include "skeleton.dtsi"
|
||||
#include "imx28-pinfunc.h"
|
||||
|
||||
/ {
|
||||
interrupt-parent = <&icoll>;
|
||||
|
|
@ -207,538 +208,579 @@
|
|||
duart_pins_a: duart@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3102 /* MX28_PAD_PWM0__DUART_RX */
|
||||
0x3112 /* MX28_PAD_PWM1__DUART_TX */
|
||||
MX28_PAD_PWM0__DUART_RX
|
||||
MX28_PAD_PWM1__DUART_TX
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
duart_pins_b: duart@1 {
|
||||
reg = <1>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
|
||||
0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
|
||||
MX28_PAD_AUART0_CTS__DUART_RX
|
||||
MX28_PAD_AUART0_RTS__DUART_TX
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
duart_4pins_a: duart-4pins@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
|
||||
0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
|
||||
0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */
|
||||
0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */
|
||||
MX28_PAD_AUART0_CTS__DUART_RX
|
||||
MX28_PAD_AUART0_RTS__DUART_TX
|
||||
MX28_PAD_AUART0_RX__DUART_CTS
|
||||
MX28_PAD_AUART0_TX__DUART_RTS
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
gpmi_pins_a: gpmi-nand@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */
|
||||
0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */
|
||||
0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */
|
||||
0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */
|
||||
0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */
|
||||
0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */
|
||||
0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */
|
||||
0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */
|
||||
0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */
|
||||
0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */
|
||||
0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
|
||||
0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
|
||||
0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */
|
||||
0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */
|
||||
0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
|
||||
MX28_PAD_GPMI_D00__GPMI_D0
|
||||
MX28_PAD_GPMI_D01__GPMI_D1
|
||||
MX28_PAD_GPMI_D02__GPMI_D2
|
||||
MX28_PAD_GPMI_D03__GPMI_D3
|
||||
MX28_PAD_GPMI_D04__GPMI_D4
|
||||
MX28_PAD_GPMI_D05__GPMI_D5
|
||||
MX28_PAD_GPMI_D06__GPMI_D6
|
||||
MX28_PAD_GPMI_D07__GPMI_D7
|
||||
MX28_PAD_GPMI_CE0N__GPMI_CE0N
|
||||
MX28_PAD_GPMI_RDY0__GPMI_READY0
|
||||
MX28_PAD_GPMI_RDN__GPMI_RDN
|
||||
MX28_PAD_GPMI_WRN__GPMI_WRN
|
||||
MX28_PAD_GPMI_ALE__GPMI_ALE
|
||||
MX28_PAD_GPMI_CLE__GPMI_CLE
|
||||
MX28_PAD_GPMI_RESETN__GPMI_RESETN
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
gpmi_status_cfg: gpmi-status-cfg {
|
||||
fsl,pinmux-ids = <
|
||||
0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
|
||||
0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
|
||||
0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
|
||||
MX28_PAD_GPMI_RDN__GPMI_RDN
|
||||
MX28_PAD_GPMI_WRN__GPMI_WRN
|
||||
MX28_PAD_GPMI_RESETN__GPMI_RESETN
|
||||
>;
|
||||
fsl,drive-strength = <2>;
|
||||
fsl,drive-strength = <MXS_DRIVE_12mA>;
|
||||
};
|
||||
|
||||
auart0_pins_a: auart0@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
|
||||
0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
|
||||
0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */
|
||||
0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */
|
||||
MX28_PAD_AUART0_RX__AUART0_RX
|
||||
MX28_PAD_AUART0_TX__AUART0_TX
|
||||
MX28_PAD_AUART0_CTS__AUART0_CTS
|
||||
MX28_PAD_AUART0_RTS__AUART0_RTS
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
auart0_2pins_a: auart0-2pins@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
|
||||
0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
|
||||
MX28_PAD_AUART0_RX__AUART0_RX
|
||||
MX28_PAD_AUART0_TX__AUART0_TX
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
auart1_pins_a: auart1@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
|
||||
0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
|
||||
0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */
|
||||
0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */
|
||||
MX28_PAD_AUART1_RX__AUART1_RX
|
||||
MX28_PAD_AUART1_TX__AUART1_TX
|
||||
MX28_PAD_AUART1_CTS__AUART1_CTS
|
||||
MX28_PAD_AUART1_RTS__AUART1_RTS
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
auart1_2pins_a: auart1-2pins@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
|
||||
0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
|
||||
MX28_PAD_AUART1_RX__AUART1_RX
|
||||
MX28_PAD_AUART1_TX__AUART1_TX
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
auart2_2pins_a: auart2-2pins@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */
|
||||
0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */
|
||||
MX28_PAD_SSP2_SCK__AUART2_RX
|
||||
MX28_PAD_SSP2_MOSI__AUART2_TX
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
auart2_2pins_b: auart2-2pins@1 {
|
||||
reg = <1>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3080 /* MX28_PAD_AUART2_RX__AUART2_RX */
|
||||
0x3090 /* MX28_PAD_AUART2_TX__AUART2_TX */
|
||||
MX28_PAD_AUART2_RX__AUART2_RX
|
||||
MX28_PAD_AUART2_TX__AUART2_TX
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
auart3_pins_a: auart3@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
|
||||
0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
|
||||
0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */
|
||||
0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */
|
||||
MX28_PAD_AUART3_RX__AUART3_RX
|
||||
MX28_PAD_AUART3_TX__AUART3_TX
|
||||
MX28_PAD_AUART3_CTS__AUART3_CTS
|
||||
MX28_PAD_AUART3_RTS__AUART3_RTS
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
auart3_2pins_a: auart3-2pins@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */
|
||||
0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */
|
||||
MX28_PAD_SSP2_MISO__AUART3_RX
|
||||
MX28_PAD_SSP2_SS0__AUART3_TX
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
auart3_2pins_b: auart3-2pins@1 {
|
||||
reg = <1>;
|
||||
fsl,pinmux-ids = <
|
||||
0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
|
||||
0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
|
||||
MX28_PAD_AUART3_RX__AUART3_RX
|
||||
MX28_PAD_AUART3_TX__AUART3_TX
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
auart4_2pins_a: auart4@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2181 /* MX28_PAD_SSP3_SCK__AUART4_TX */
|
||||
0x2191 /* MX28_PAD_SSP3_MOSI__AUART4_RX */
|
||||
MX28_PAD_SSP3_SCK__AUART4_TX
|
||||
MX28_PAD_SSP3_MOSI__AUART4_RX
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
mac0_pins_a: mac0@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */
|
||||
0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */
|
||||
0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */
|
||||
0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */
|
||||
0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */
|
||||
0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */
|
||||
0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */
|
||||
0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */
|
||||
0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */
|
||||
MX28_PAD_ENET0_MDC__ENET0_MDC
|
||||
MX28_PAD_ENET0_MDIO__ENET0_MDIO
|
||||
MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
|
||||
MX28_PAD_ENET0_RXD0__ENET0_RXD0
|
||||
MX28_PAD_ENET0_RXD1__ENET0_RXD1
|
||||
MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
|
||||
MX28_PAD_ENET0_TXD0__ENET0_TXD0
|
||||
MX28_PAD_ENET0_TXD1__ENET0_TXD1
|
||||
MX28_PAD_ENET_CLK__CLKCTRL_ENET
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_8mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
mac1_pins_a: mac1@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */
|
||||
0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */
|
||||
0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */
|
||||
0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */
|
||||
0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */
|
||||
0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */
|
||||
MX28_PAD_ENET0_CRS__ENET1_RX_EN
|
||||
MX28_PAD_ENET0_RXD2__ENET1_RXD0
|
||||
MX28_PAD_ENET0_RXD3__ENET1_RXD1
|
||||
MX28_PAD_ENET0_COL__ENET1_TX_EN
|
||||
MX28_PAD_ENET0_TXD2__ENET1_TXD0
|
||||
MX28_PAD_ENET0_TXD3__ENET1_TXD1
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_8mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
mmc0_8bit_pins_a: mmc0-8bit@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
|
||||
0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
|
||||
0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
|
||||
0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
|
||||
0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */
|
||||
0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */
|
||||
0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */
|
||||
0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */
|
||||
0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
|
||||
0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
|
||||
0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
|
||||
MX28_PAD_SSP0_DATA0__SSP0_D0
|
||||
MX28_PAD_SSP0_DATA1__SSP0_D1
|
||||
MX28_PAD_SSP0_DATA2__SSP0_D2
|
||||
MX28_PAD_SSP0_DATA3__SSP0_D3
|
||||
MX28_PAD_SSP0_DATA4__SSP0_D4
|
||||
MX28_PAD_SSP0_DATA5__SSP0_D5
|
||||
MX28_PAD_SSP0_DATA6__SSP0_D6
|
||||
MX28_PAD_SSP0_DATA7__SSP0_D7
|
||||
MX28_PAD_SSP0_CMD__SSP0_CMD
|
||||
MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
|
||||
MX28_PAD_SSP0_SCK__SSP0_SCK
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_8mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
mmc0_4bit_pins_a: mmc0-4bit@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
|
||||
0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
|
||||
0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
|
||||
0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
|
||||
0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
|
||||
0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
|
||||
0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
|
||||
MX28_PAD_SSP0_DATA0__SSP0_D0
|
||||
MX28_PAD_SSP0_DATA1__SSP0_D1
|
||||
MX28_PAD_SSP0_DATA2__SSP0_D2
|
||||
MX28_PAD_SSP0_DATA3__SSP0_D3
|
||||
MX28_PAD_SSP0_CMD__SSP0_CMD
|
||||
MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
|
||||
MX28_PAD_SSP0_SCK__SSP0_SCK
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_8mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
mmc0_cd_cfg: mmc0-cd-cfg {
|
||||
fsl,pinmux-ids = <
|
||||
0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
|
||||
MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
|
||||
>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
mmc0_sck_cfg: mmc0-sck-cfg {
|
||||
fsl,pinmux-ids = <
|
||||
0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
|
||||
MX28_PAD_SSP0_SCK__SSP0_SCK
|
||||
>;
|
||||
fsl,drive-strength = <2>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_12mA>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
mmc2_4bit_pins_a: mmc2-4bit@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_SSP0_DATA4__SSP2_D0
|
||||
MX28_PAD_SSP1_SCK__SSP2_D1
|
||||
MX28_PAD_SSP1_CMD__SSP2_D2
|
||||
MX28_PAD_SSP0_DATA5__SSP2_D3
|
||||
MX28_PAD_SSP0_DATA6__SSP2_CMD
|
||||
MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
|
||||
MX28_PAD_SSP0_DATA7__SSP2_SCK
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_8mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
mmc2_cd_cfg: mmc2-cd-cfg {
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
|
||||
>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
mmc2_sck_cfg: mmc2-sck-cfg {
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_SSP0_DATA7__SSP2_SCK
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_12mA>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
i2c0_pins_a: i2c0@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */
|
||||
0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */
|
||||
MX28_PAD_I2C0_SCL__I2C0_SCL
|
||||
MX28_PAD_I2C0_SDA__I2C0_SDA
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_8mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
i2c0_pins_b: i2c0@1 {
|
||||
reg = <1>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */
|
||||
0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */
|
||||
MX28_PAD_AUART0_RX__I2C0_SCL
|
||||
MX28_PAD_AUART0_TX__I2C0_SDA
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_8mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
i2c1_pins_a: i2c1@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3101 /* MX28_PAD_PWM0__I2C1_SCL */
|
||||
0x3111 /* MX28_PAD_PWM1__I2C1_SDA */
|
||||
MX28_PAD_PWM0__I2C1_SCL
|
||||
MX28_PAD_PWM1__I2C1_SDA
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_8mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
saif0_pins_a: saif0@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */
|
||||
0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
|
||||
0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
|
||||
0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
|
||||
MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
|
||||
MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
|
||||
MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
|
||||
MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
|
||||
>;
|
||||
fsl,drive-strength = <2>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_12mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
saif0_pins_b: saif0@1 {
|
||||
reg = <1>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
|
||||
0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
|
||||
0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
|
||||
MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
|
||||
MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
|
||||
MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
|
||||
>;
|
||||
fsl,drive-strength = <2>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_12mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
saif1_pins_a: saif1@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */
|
||||
MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
|
||||
>;
|
||||
fsl,drive-strength = <2>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_12mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
pwm0_pins_a: pwm0@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3100 /* MX28_PAD_PWM0__PWM_0 */
|
||||
MX28_PAD_PWM0__PWM_0
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
pwm2_pins_a: pwm2@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3120 /* MX28_PAD_PWM2__PWM_2 */
|
||||
MX28_PAD_PWM2__PWM_2
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
pwm3_pins_a: pwm3@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x31c0 /* MX28_PAD_PWM3__PWM_3 */
|
||||
MX28_PAD_PWM3__PWM_3
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
pwm3_pins_b: pwm3@1 {
|
||||
reg = <1>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3141 /* MX28_PAD_SAIF0_MCLK__PWM3 */
|
||||
MX28_PAD_SAIF0_MCLK__PWM_3
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
pwm4_pins_a: pwm4@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x31d0 /* MX28_PAD_PWM4__PWM_4 */
|
||||
MX28_PAD_PWM4__PWM_4
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
lcdif_24bit_pins_a: lcdif-24bit@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
|
||||
0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
|
||||
0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
|
||||
0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
|
||||
0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
|
||||
0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
|
||||
0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
|
||||
0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
|
||||
0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
|
||||
0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
|
||||
0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
|
||||
0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
|
||||
0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
|
||||
0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
|
||||
0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
|
||||
0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
|
||||
0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
|
||||
0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
|
||||
0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */
|
||||
0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */
|
||||
0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */
|
||||
0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */
|
||||
0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */
|
||||
0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */
|
||||
MX28_PAD_LCD_D00__LCD_D0
|
||||
MX28_PAD_LCD_D01__LCD_D1
|
||||
MX28_PAD_LCD_D02__LCD_D2
|
||||
MX28_PAD_LCD_D03__LCD_D3
|
||||
MX28_PAD_LCD_D04__LCD_D4
|
||||
MX28_PAD_LCD_D05__LCD_D5
|
||||
MX28_PAD_LCD_D06__LCD_D6
|
||||
MX28_PAD_LCD_D07__LCD_D7
|
||||
MX28_PAD_LCD_D08__LCD_D8
|
||||
MX28_PAD_LCD_D09__LCD_D9
|
||||
MX28_PAD_LCD_D10__LCD_D10
|
||||
MX28_PAD_LCD_D11__LCD_D11
|
||||
MX28_PAD_LCD_D12__LCD_D12
|
||||
MX28_PAD_LCD_D13__LCD_D13
|
||||
MX28_PAD_LCD_D14__LCD_D14
|
||||
MX28_PAD_LCD_D15__LCD_D15
|
||||
MX28_PAD_LCD_D16__LCD_D16
|
||||
MX28_PAD_LCD_D17__LCD_D17
|
||||
MX28_PAD_LCD_D18__LCD_D18
|
||||
MX28_PAD_LCD_D19__LCD_D19
|
||||
MX28_PAD_LCD_D20__LCD_D20
|
||||
MX28_PAD_LCD_D21__LCD_D21
|
||||
MX28_PAD_LCD_D22__LCD_D22
|
||||
MX28_PAD_LCD_D23__LCD_D23
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
lcdif_16bit_pins_a: lcdif-16bit@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
|
||||
0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
|
||||
0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
|
||||
0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
|
||||
0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
|
||||
0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
|
||||
0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
|
||||
0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
|
||||
0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
|
||||
0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
|
||||
0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
|
||||
0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
|
||||
0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
|
||||
0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
|
||||
0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
|
||||
0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
|
||||
MX28_PAD_LCD_D00__LCD_D0
|
||||
MX28_PAD_LCD_D01__LCD_D1
|
||||
MX28_PAD_LCD_D02__LCD_D2
|
||||
MX28_PAD_LCD_D03__LCD_D3
|
||||
MX28_PAD_LCD_D04__LCD_D4
|
||||
MX28_PAD_LCD_D05__LCD_D5
|
||||
MX28_PAD_LCD_D06__LCD_D6
|
||||
MX28_PAD_LCD_D07__LCD_D7
|
||||
MX28_PAD_LCD_D08__LCD_D8
|
||||
MX28_PAD_LCD_D09__LCD_D9
|
||||
MX28_PAD_LCD_D10__LCD_D10
|
||||
MX28_PAD_LCD_D11__LCD_D11
|
||||
MX28_PAD_LCD_D12__LCD_D12
|
||||
MX28_PAD_LCD_D13__LCD_D13
|
||||
MX28_PAD_LCD_D14__LCD_D14
|
||||
MX28_PAD_LCD_D15__LCD_D15
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
lcdif_sync_pins_a: lcdif-sync@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
|
||||
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
|
||||
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
|
||||
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
|
||||
MX28_PAD_LCD_RS__LCD_DOTCLK
|
||||
MX28_PAD_LCD_CS__LCD_ENABLE
|
||||
MX28_PAD_LCD_RD_E__LCD_VSYNC
|
||||
MX28_PAD_LCD_WR_RWN__LCD_HSYNC
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
can0_pins_a: can0@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */
|
||||
0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */
|
||||
MX28_PAD_GPMI_RDY2__CAN0_TX
|
||||
MX28_PAD_GPMI_RDY3__CAN0_RX
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
can1_pins_a: can1@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */
|
||||
0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */
|
||||
MX28_PAD_GPMI_CE2N__CAN1_TX
|
||||
MX28_PAD_GPMI_CE3N__CAN1_RX
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
spi2_pins_a: spi2@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */
|
||||
0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */
|
||||
0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */
|
||||
0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */
|
||||
MX28_PAD_SSP2_SCK__SSP2_SCK
|
||||
MX28_PAD_SSP2_MOSI__SSP2_CMD
|
||||
MX28_PAD_SSP2_MISO__SSP2_D0
|
||||
MX28_PAD_SSP2_SS0__SSP2_D3
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
fsl,drive-strength = <MXS_DRIVE_8mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
spi3_pins_a: spi3@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3082 /* MX28_PAD_AUART2_RX__SSP3_D4 */
|
||||
0x3092 /* MX28_PAD_AUART2_TX__SSP3_D5 */
|
||||
0x2180 /* MX28_PAD_SSP3_SCK__SSP3_SCK */
|
||||
0x2190 /* MX28_PAD_SSP3_MOSI__SSP3_CMD */
|
||||
0x21A0 /* MX28_PAD_SSP3_MISO__SSP3_D0 */
|
||||
0x21B0 /* MX28_PAD_SSP3_SS0__SSP3_D3 */
|
||||
MX28_PAD_AUART2_RX__SSP3_D4
|
||||
MX28_PAD_AUART2_TX__SSP3_D5
|
||||
MX28_PAD_SSP3_SCK__SSP3_SCK
|
||||
MX28_PAD_SSP3_MOSI__SSP3_CMD
|
||||
MX28_PAD_SSP3_MISO__SSP3_D0
|
||||
MX28_PAD_SSP3_SS0__SSP3_D3
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_8mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
usbphy0_pins_a: usbphy0@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */
|
||||
MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
|
||||
>;
|
||||
fsl,drive-strength = <2>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_12mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
usbphy0_pins_b: usbphy0@1 {
|
||||
reg = <1>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */
|
||||
MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
|
||||
>;
|
||||
fsl,drive-strength = <2>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_12mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
usbphy1_pins_a: usbphy1@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */
|
||||
MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
|
||||
>;
|
||||
fsl,drive-strength = <2>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
fsl,drive-strength = <MXS_DRIVE_12mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
usb0_id_pins_a: usb0id@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_AUART1_RTS__USB0_ID
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_12mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -16,6 +16,33 @@
|
|||
model = "Armadeus Systems APF51Dev docking/development board";
|
||||
compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51";
|
||||
|
||||
display@di1 {
|
||||
compatible = "fsl,imx-parallel-display";
|
||||
crtcs = <&ipu 0>;
|
||||
interface-pix-fmt = "bgr666";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ipu_disp1_1>;
|
||||
|
||||
display-timings {
|
||||
lw700 {
|
||||
native-mode;
|
||||
clock-frequency = <33000033>;
|
||||
hactive = <800>;
|
||||
vactive = <480>;
|
||||
hback-porch = <96>;
|
||||
hfront-porch = <96>;
|
||||
vback-porch = <20>;
|
||||
vfront-porch = <21>;
|
||||
hsync-len = <64>;
|
||||
vsync-len = <4>;
|
||||
hsync-active = <1>;
|
||||
vsync-active = <1>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
|
|
|
|||
|
|
@ -27,6 +27,20 @@
|
|||
interface-pix-fmt = "rgb24";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ipu_disp1_1>;
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: dvi {
|
||||
clock-frequency = <65000000>;
|
||||
hactive = <1024>;
|
||||
vactive = <768>;
|
||||
hback-porch = <220>;
|
||||
hfront-porch = <40>;
|
||||
vback-porch = <21>;
|
||||
vfront-porch = <7>;
|
||||
hsync-len = <60>;
|
||||
vsync-len = <10>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
display@di1 {
|
||||
|
|
@ -35,6 +49,25 @@
|
|||
interface-pix-fmt = "rgb565";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ipu_disp2_1>;
|
||||
status = "disabled";
|
||||
display-timings {
|
||||
native-mode = <&timing1>;
|
||||
timing1: claawvga {
|
||||
clock-frequency = <27000000>;
|
||||
hactive = <800>;
|
||||
vactive = <480>;
|
||||
hback-porch = <40>;
|
||||
hfront-porch = <60>;
|
||||
vback-porch = <10>;
|
||||
vfront-porch = <10>;
|
||||
hsync-len = <20>;
|
||||
vsync-len = <10>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
|
|
@ -95,7 +128,7 @@
|
|||
|
||||
&uart3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart3_1>;
|
||||
pinctrl-0 = <&pinctrl_uart3_1 &pinctrl_uart3_rtscts_1>;
|
||||
fsl,uart-has-rtscts;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -252,7 +285,7 @@
|
|||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart1_1>;
|
||||
pinctrl-0 = <&pinctrl_uart1_1 &pinctrl_uart1_rtscts_1>;
|
||||
fsl,uart-has-rtscts;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -86,6 +86,11 @@
|
|||
interrupt-parent = <&tzic>;
|
||||
ranges;
|
||||
|
||||
iram: iram@1ffe0000 {
|
||||
compatible = "mmio-sram";
|
||||
reg = <0x1ffe0000 0x20000>;
|
||||
};
|
||||
|
||||
ipu: ipu@40000000 {
|
||||
#crtc-cells = <1>;
|
||||
compatible = "fsl,imx51-ipu";
|
||||
|
|
@ -374,6 +379,14 @@
|
|||
clocks = <&clks 107>;
|
||||
};
|
||||
|
||||
owire: owire@83fa4000 {
|
||||
compatible = "fsl,imx51-owire", "fsl,imx21-owire";
|
||||
reg = <0x83fa4000 0x4000>;
|
||||
interrupts = <88>;
|
||||
clocks = <&clks 159>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ecspi2: ecspi@83fac000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -747,6 +760,11 @@
|
|||
fsl,pins = <
|
||||
MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
|
||||
MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart1_rtscts_1: uart1rtscts-1 {
|
||||
fsl,pins = <
|
||||
MX51_PAD_UART1_RTS__UART1_RTS 0x1c5
|
||||
MX51_PAD_UART1_CTS__UART1_CTS 0x1c5
|
||||
>;
|
||||
|
|
@ -767,6 +785,11 @@
|
|||
fsl,pins = <
|
||||
MX51_PAD_EIM_D25__UART3_RXD 0x1c5
|
||||
MX51_PAD_EIM_D26__UART3_TXD 0x1c5
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart3_rtscts_1: uart3rtscts-1 {
|
||||
fsl,pins = <
|
||||
MX51_PAD_EIM_D27__UART3_RTS 0x1c5
|
||||
MX51_PAD_EIM_D24__UART3_CTS 0x1c5
|
||||
>;
|
||||
|
|
|
|||
|
|
@ -55,19 +55,20 @@
|
|||
label = "Power Button";
|
||||
gpios = <&gpio1 8 0>;
|
||||
linux,code = <116>; /* KEY_POWER */
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
|
||||
volume-up {
|
||||
label = "Volume Up";
|
||||
gpios = <&gpio2 14 0>;
|
||||
linux,code = <115>; /* KEY_VOLUMEUP */
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
|
||||
volume-down {
|
||||
label = "Volume Down";
|
||||
gpios = <&gpio2 15 0>;
|
||||
linux,code = <114>; /* KEY_VOLUMEDOWN */
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -122,7 +123,6 @@
|
|||
&esdhc1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_esdhc1_1>;
|
||||
cd-gpios = <&gpio3 13 0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
@ -136,6 +136,7 @@
|
|||
pinctrl-0 = <&pinctrl_esdhc3_1>;
|
||||
cd-gpios = <&gpio3 11 0>;
|
||||
wp-gpios = <&gpio3 12 0>;
|
||||
bus-width = <8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
@ -152,7 +153,6 @@
|
|||
MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
|
||||
MX53_PAD_EIM_DA11__GPIO3_11 0x80000000
|
||||
MX53_PAD_EIM_DA12__GPIO3_12 0x80000000
|
||||
MX53_PAD_EIM_DA13__GPIO3_13 0x80000000
|
||||
MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
|
||||
MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000
|
||||
MX53_PAD_GPIO_16__GPIO7_11 0x80000000
|
||||
|
|
@ -318,5 +318,6 @@
|
|||
};
|
||||
|
||||
&usbotg {
|
||||
status = "okay";
|
||||
dr_mode = "peripheral";
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -536,7 +536,7 @@
|
|||
#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS 0x1d4 0x4e8 0x85c 0x2 0x0
|
||||
#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1d4 0x4e8 0x000 0x5 0x0
|
||||
#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK 0x1d4 0x4e8 0x000 0x6 0x0
|
||||
#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1d8 0x4ec 0x000 0x0 0x0
|
||||
#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1d8 0x4ec 0x004 0x0 0xff0d0100
|
||||
#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1d8 0x4ec 0x000 0x1 0x0
|
||||
#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK 0x1d8 0x4ec 0x864 0x2 0x0
|
||||
#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN 0x1d8 0x4ec 0x914 0x3 0x1
|
||||
|
|
@ -654,7 +654,7 @@
|
|||
#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK 0x224 0x5f4 0x86c 0x0 0x1
|
||||
#define MX6QDL_PAD_GPIO_1__WDOG2_B 0x224 0x5f4 0x000 0x1 0x0
|
||||
#define MX6QDL_PAD_GPIO_1__KEY_ROW5 0x224 0x5f4 0x8f4 0x2 0x0
|
||||
#define MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x224 0x5f4 0x000 0x3 0x0
|
||||
#define MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x224 0x5f4 0x004 0x3 0xff0d0101
|
||||
#define MX6QDL_PAD_GPIO_1__PWM2_OUT 0x224 0x5f4 0x000 0x4 0x0
|
||||
#define MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x224 0x5f4 0x000 0x5 0x0
|
||||
#define MX6QDL_PAD_GPIO_1__SD1_CD_B 0x224 0x5f4 0x000 0x6 0x0
|
||||
|
|
|
|||
|
|
@ -65,8 +65,10 @@
|
|||
};
|
||||
};
|
||||
|
||||
&sata {
|
||||
&audmux {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_audmux_1>;
|
||||
};
|
||||
|
||||
&ecspi1 {
|
||||
|
|
@ -83,11 +85,29 @@
|
|||
};
|
||||
};
|
||||
|
||||
&ssi1 {
|
||||
fsl,mode = "i2s-slave";
|
||||
&fec {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_enet_1>;
|
||||
phy-mode = "rgmii";
|
||||
phy-reset-gpios = <&gpio3 23 0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c1_1>;
|
||||
|
||||
codec: sgtl5000@0a {
|
||||
compatible = "fsl,sgtl5000";
|
||||
reg = <0x0a>;
|
||||
clocks = <&clks 201>;
|
||||
VDDA-supply = <®_2p5v>;
|
||||
VDDIO-supply = <®_3p3v>;
|
||||
};
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_hog>;
|
||||
|
|
@ -103,11 +123,56 @@
|
|||
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
|
||||
MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
|
||||
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x80000000
|
||||
MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
|
||||
>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ldb {
|
||||
status = "okay";
|
||||
|
||||
lvds-channel@0 {
|
||||
fsl,data-mapping = "spwg";
|
||||
fsl,data-width = <18>;
|
||||
status = "okay";
|
||||
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: hsd100pxn1 {
|
||||
clock-frequency = <65000000>;
|
||||
hactive = <1024>;
|
||||
vactive = <768>;
|
||||
hback-porch = <220>;
|
||||
hfront-porch = <40>;
|
||||
vback-porch = <21>;
|
||||
vfront-porch = <7>;
|
||||
hsync-len = <60>;
|
||||
vsync-len = <10>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssi1 {
|
||||
fsl,mode = "i2s-slave";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart2_1>;
|
||||
};
|
||||
|
||||
&usbh1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg {
|
||||
vbus-supply = <®_usb_otg_vbus>;
|
||||
pinctrl-names = "default";
|
||||
|
|
@ -116,18 +181,6 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fec {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_enet_1>;
|
||||
phy-mode = "rgmii";
|
||||
phy-reset-gpios = <&gpio3 23 0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc3_2>;
|
||||
|
|
@ -145,30 +198,3 @@
|
|||
vmmc-supply = <®_3p3v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&audmux {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_audmux_1>;
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart2_1>;
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c1_1>;
|
||||
|
||||
codec: sgtl5000@0a {
|
||||
compatible = "fsl,sgtl5000";
|
||||
reg = <0x0a>;
|
||||
clocks = <&clks 201>;
|
||||
VDDA-supply = <®_2p5v>;
|
||||
VDDIO-supply = <®_3p3v>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -0,0 +1,39 @@
|
|||
/*
|
||||
* Copyright 2013 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* Author: Fabio Estevam <fabio.estevam@freescale.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "imx6q.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Udoo i.MX6 Quad Board";
|
||||
compatible = "udoo,imx6q-udoo", "fsl,imx6q";
|
||||
|
||||
memory {
|
||||
reg = <0x10000000 0x40000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart2_1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc3_2>;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -54,6 +54,7 @@
|
|||
fsl,pins = <
|
||||
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
|
||||
MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x80000000
|
||||
MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
|
@ -74,8 +75,10 @@
|
|||
};
|
||||
|
||||
&usdhc3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||||
pinctrl-0 = <&pinctrl_usdhc3_1>;
|
||||
pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
|
||||
pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
|
||||
cd-gpios = <&gpio6 15 0>;
|
||||
wp-gpios = <&gpio1 13 0>;
|
||||
status = "okay";
|
||||
|
|
|
|||
|
|
@ -80,6 +80,14 @@
|
|||
mux-int-port = <2>;
|
||||
mux-ext-port = <3>;
|
||||
};
|
||||
|
||||
backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm1 0 5000000>;
|
||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <7>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&audmux {
|
||||
|
|
@ -108,6 +116,7 @@
|
|||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_enet_1>;
|
||||
phy-mode = "rgmii";
|
||||
phy-reset-gpios = <&gpio1 25 0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
@ -172,6 +181,7 @@
|
|||
MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000
|
||||
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
|
||||
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000
|
||||
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
|
@ -202,6 +212,12 @@
|
|||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm0_1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssi2 {
|
||||
fsl,mode = "i2s-slave";
|
||||
status = "okay";
|
||||
|
|
@ -229,6 +245,7 @@
|
|||
&usdhc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc2_1>;
|
||||
bus-width = <8>;
|
||||
cd-gpios = <&gpio2 2 0>;
|
||||
wp-gpios = <&gpio2 3 0>;
|
||||
status = "okay";
|
||||
|
|
@ -237,6 +254,7 @@
|
|||
&usdhc3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc3_1>;
|
||||
bus-width = <8>;
|
||||
cd-gpios = <&gpio2 0 0>;
|
||||
wp-gpios = <&gpio2 1 0>;
|
||||
status = "okay";
|
||||
|
|
|
|||
|
|
@ -43,6 +43,13 @@
|
|||
mux-int-port = <1>;
|
||||
mux-ext-port = <3>;
|
||||
};
|
||||
|
||||
sound-spdif {
|
||||
compatible = "fsl,imx-audio-spdif";
|
||||
model = "imx-spdif";
|
||||
spdif-controller = <&spdif>;
|
||||
spdif-out;
|
||||
};
|
||||
};
|
||||
|
||||
&audmux {
|
||||
|
|
@ -81,6 +88,7 @@
|
|||
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* WL_REG_ON */
|
||||
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */
|
||||
MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */
|
||||
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
|
@ -90,6 +98,13 @@
|
|||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_enet_1>;
|
||||
phy-mode = "rgmii";
|
||||
phy-reset-gpios = <&gpio3 29 0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spdif {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_spdif_3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
@ -115,6 +130,14 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usbotg_1>;
|
||||
disable-over-current;
|
||||
dr_mode = "peripheral";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc1_2>;
|
||||
|
|
|
|||
|
|
@ -116,6 +116,22 @@
|
|||
arm,data-latency = <4 2 3>;
|
||||
};
|
||||
|
||||
pcie: pcie@0x01000000 {
|
||||
compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
|
||||
reg = <0x01ffc000 0x4000>; /* DBI */
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
device_type = "pci";
|
||||
ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */
|
||||
0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
|
||||
0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
|
||||
num-lanes = <1>;
|
||||
interrupts = <0 123 0x04>;
|
||||
clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
|
||||
clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pmu {
|
||||
compatible = "arm,cortex-a9-pmu";
|
||||
interrupts = <0 94 0x04>;
|
||||
|
|
@ -136,8 +152,23 @@
|
|||
ranges;
|
||||
|
||||
spdif: spdif@02004000 {
|
||||
compatible = "fsl,imx35-spdif";
|
||||
reg = <0x02004000 0x4000>;
|
||||
interrupts = <0 52 0x04>;
|
||||
dmas = <&sdma 14 18 0>,
|
||||
<&sdma 15 18 0>;
|
||||
dma-names = "rx", "tx";
|
||||
clocks = <&clks 197>, <&clks 3>,
|
||||
<&clks 197>, <&clks 107>,
|
||||
<&clks 0>, <&clks 118>,
|
||||
<&clks 62>, <&clks 139>,
|
||||
<&clks 0>;
|
||||
clock-names = "core", "rxtx0",
|
||||
"rxtx1", "rxtx2",
|
||||
"rxtx3", "rxtx4",
|
||||
"rxtx5", "rxtx6",
|
||||
"rxtx7";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ecspi1: ecspi@02008000 {
|
||||
|
|
@ -1010,6 +1041,12 @@
|
|||
MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_spdif_3: spdifgrp-3 {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1b0b0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
uart1 {
|
||||
|
|
@ -1184,6 +1221,36 @@
|
|||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz { /* 100Mhz */
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
|
||||
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
|
||||
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
|
||||
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
|
||||
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
|
||||
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
|
||||
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
|
||||
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
|
||||
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
|
||||
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz { /* 200Mhz */
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
|
||||
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
|
||||
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
|
||||
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
|
||||
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
|
||||
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
|
||||
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
|
||||
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
|
||||
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
|
||||
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3_2: usdhc3grp-2 {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
||||
|
|
|
|||
|
|
@ -17,6 +17,44 @@
|
|||
memory {
|
||||
reg = <0x80000000 0x40000000>;
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
|
||||
reg_usb_otg1_vbus: usb_otg1_vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_otg1_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio4 0 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_usb_otg2_vbus: usb_otg2_vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_otg2_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio4 2 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ecspi1 {
|
||||
fsl,spi-num-chipselects = <1>;
|
||||
cs-gpios = <&gpio4 11 0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ecspi1_1>;
|
||||
status = "okay";
|
||||
|
||||
flash: m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "st,m25p32";
|
||||
spi-max-frequency = <20000000>;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&fec {
|
||||
|
|
@ -38,6 +76,8 @@
|
|||
MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059
|
||||
MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059
|
||||
MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
|
||||
MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x80000000
|
||||
MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x80000000
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
|
@ -49,9 +89,26 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc1 {
|
||||
&usbotg1 {
|
||||
vbus-supply = <®_usb_otg1_vbus>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usbotg1_1>;
|
||||
disable-over-current;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg2 {
|
||||
vbus-supply = <®_usb_otg2_vbus>;
|
||||
dr_mode = "host";
|
||||
disable-over-current;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc1 {
|
||||
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||||
pinctrl-0 = <&pinctrl_usdhc1_1>;
|
||||
pinctrl-1 = <&pinctrl_usdhc1_1_100mhz>;
|
||||
pinctrl-2 = <&pinctrl_usdhc1_1_200mhz>;
|
||||
bus-width = <8>;
|
||||
cd-gpios = <&gpio4 7 0>;
|
||||
wp-gpios = <&gpio4 6 0>;
|
||||
|
|
@ -59,16 +116,20 @@
|
|||
};
|
||||
|
||||
&usdhc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||||
pinctrl-0 = <&pinctrl_usdhc2_1>;
|
||||
pinctrl-1 = <&pinctrl_usdhc2_1_100mhz>;
|
||||
pinctrl-2 = <&pinctrl_usdhc2_1_200mhz>;
|
||||
cd-gpios = <&gpio5 0 0>;
|
||||
wp-gpios = <&gpio4 29 0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||||
pinctrl-0 = <&pinctrl_usdhc3_1>;
|
||||
pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
|
||||
pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
|
||||
cd-gpios = <&gpio3 22 0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -13,16 +13,20 @@
|
|||
|
||||
/ {
|
||||
aliases {
|
||||
serial0 = &uart1;
|
||||
serial1 = &uart2;
|
||||
serial2 = &uart3;
|
||||
serial3 = &uart4;
|
||||
serial4 = &uart5;
|
||||
gpio0 = &gpio1;
|
||||
gpio1 = &gpio2;
|
||||
gpio2 = &gpio3;
|
||||
gpio3 = &gpio4;
|
||||
gpio4 = &gpio5;
|
||||
serial0 = &uart1;
|
||||
serial1 = &uart2;
|
||||
serial2 = &uart3;
|
||||
serial3 = &uart4;
|
||||
serial4 = &uart5;
|
||||
spi0 = &ecspi1;
|
||||
spi1 = &ecspi2;
|
||||
spi2 = &ecspi3;
|
||||
spi3 = &ecspi4;
|
||||
};
|
||||
|
||||
cpus {
|
||||
|
|
@ -528,10 +532,26 @@
|
|||
interrupts = <0 89 0x04>;
|
||||
};
|
||||
|
||||
gpr: iomuxc-gpr@020e0000 {
|
||||
compatible = "fsl,imx6sl-iomuxc-gpr",
|
||||
"fsl,imx6q-iomuxc-gpr", "syscon";
|
||||
reg = <0x020e0000 0x38>;
|
||||
};
|
||||
|
||||
iomuxc: iomuxc@020e0000 {
|
||||
compatible = "fsl,imx6sl-iomuxc";
|
||||
reg = <0x020e0000 0x4000>;
|
||||
|
||||
ecspi1 {
|
||||
pinctrl_ecspi1_1: ecspi1grp-1 {
|
||||
fsl,pins = <
|
||||
MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1
|
||||
MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1
|
||||
MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
fec {
|
||||
pinctrl_fec_1: fecgrp-1 {
|
||||
fsl,pins = <
|
||||
|
|
@ -557,6 +577,64 @@
|
|||
};
|
||||
};
|
||||
|
||||
usbotg1 {
|
||||
pinctrl_usbotg1_1: usbotg1grp-1 {
|
||||
fsl,pins = <
|
||||
MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbotg1_2: usbotg1grp-2 {
|
||||
fsl,pins = <
|
||||
MX6SL_PAD_FEC_RXD0__USB_OTG1_ID 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbotg1_3: usbotg1grp-3 {
|
||||
fsl,pins = <
|
||||
MX6SL_PAD_LCD_DAT1__USB_OTG1_ID 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbotg1_4: usbotg1grp-4 {
|
||||
fsl,pins = <
|
||||
MX6SL_PAD_REF_CLK_32K__USB_OTG1_ID 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbotg1_5: usbotg1grp-5 {
|
||||
fsl,pins = <
|
||||
MX6SL_PAD_SD3_DAT0__USB_OTG1_ID 0x17059
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
usbotg2 {
|
||||
pinctrl_usbotg2_1: usbotg2grp-1 {
|
||||
fsl,pins = <
|
||||
MX6SL_PAD_ECSPI1_SCLK__USB_OTG2_OC 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbotg2_2: usbotg2grp-2 {
|
||||
fsl,pins = <
|
||||
MX6SL_PAD_ECSPI2_SCLK__USB_OTG2_OC 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbotg2_3: usbotg2grp-3 {
|
||||
fsl,pins = <
|
||||
MX6SL_PAD_KEY_ROW5__USB_OTG2_OC 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbotg2_4: usbotg2grp-4 {
|
||||
fsl,pins = <
|
||||
MX6SL_PAD_SD3_DAT2__USB_OTG2_OC 0x17059
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
usdhc1 {
|
||||
pinctrl_usdhc1_1: usdhc1grp-1 {
|
||||
fsl,pins = <
|
||||
|
|
@ -572,6 +650,38 @@
|
|||
MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc1_1_100mhz: usdhc1grp-1-100mhz {
|
||||
fsl,pins = <
|
||||
MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9
|
||||
MX6SL_PAD_SD1_CLK__SD1_CLK 0x100b9
|
||||
MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170b9
|
||||
MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170b9
|
||||
MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170b9
|
||||
MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170b9
|
||||
MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9
|
||||
MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9
|
||||
MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9
|
||||
MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc1_1_200mhz: usdhc1grp-1-200mhz {
|
||||
fsl,pins = <
|
||||
MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9
|
||||
MX6SL_PAD_SD1_CLK__SD1_CLK 0x100f9
|
||||
MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
|
||||
MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
|
||||
MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
|
||||
MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
|
||||
MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170f9
|
||||
MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170f9
|
||||
MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170f9
|
||||
MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170f9
|
||||
>;
|
||||
};
|
||||
|
||||
|
||||
};
|
||||
|
||||
usdhc2 {
|
||||
|
|
@ -585,6 +695,29 @@
|
|||
MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_1_100mhz: usdhc2grp-1-100mhz {
|
||||
fsl,pins = <
|
||||
MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9
|
||||
MX6SL_PAD_SD2_CLK__SD2_CLK 0x100b9
|
||||
MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
|
||||
MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
|
||||
MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
|
||||
MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_1_200mhz: usdhc2grp-1-200mhz {
|
||||
fsl,pins = <
|
||||
MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9
|
||||
MX6SL_PAD_SD2_CLK__SD2_CLK 0x100f9
|
||||
MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
|
||||
MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
|
||||
MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
|
||||
MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
|
||||
>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
usdhc3 {
|
||||
|
|
@ -598,6 +731,28 @@
|
|||
MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz {
|
||||
fsl,pins = <
|
||||
MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9
|
||||
MX6SL_PAD_SD3_CLK__SD3_CLK 0x100b9
|
||||
MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
|
||||
MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
|
||||
MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
|
||||
MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz {
|
||||
fsl,pins = <
|
||||
MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9
|
||||
MX6SL_PAD_SD3_CLK__SD3_CLK 0x100f9
|
||||
MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
|
||||
MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
|
||||
MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
|
||||
MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
|
||||
>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -619,7 +774,8 @@
|
|||
<&clks IMX6SL_CLK_SDMA>;
|
||||
clock-names = "ipg", "ahb";
|
||||
#dma-cells = <3>;
|
||||
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6sl.bin";
|
||||
/* imx6sl reuses imx6q sdma firmware */
|
||||
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
|
||||
};
|
||||
|
||||
pxp: pxp@020f0000 {
|
||||
|
|
@ -663,7 +819,7 @@
|
|||
usbotg2: usb@02184200 {
|
||||
compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
|
||||
reg = <0x02184200 0x200>;
|
||||
interrupts = <0 40 0x04>;
|
||||
interrupts = <0 42 0x04>;
|
||||
clocks = <&clks IMX6SL_CLK_USBOH3>;
|
||||
fsl,usbphy = <&usbphy2>;
|
||||
fsl,usbmisc = <&usbmisc 1>;
|
||||
|
|
@ -673,7 +829,7 @@
|
|||
usbh: usb@02184400 {
|
||||
compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
|
||||
reg = <0x02184400 0x200>;
|
||||
interrupts = <0 42 0x04>;
|
||||
interrupts = <0 40 0x04>;
|
||||
clocks = <&clks IMX6SL_CLK_USBOH3>;
|
||||
fsl,usbmisc = <&usbmisc 2>;
|
||||
status = "disabled";
|
||||
|
|
|
|||
|
|
@ -0,0 +1,31 @@
|
|||
/*
|
||||
* Header providing constants for i.MX28 pinctrl bindings.
|
||||
*
|
||||
* Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
#ifndef __DT_BINDINGS_MXS_PINCTRL_H__
|
||||
#define __DT_BINDINGS_MXS_PINCTRL_H__
|
||||
|
||||
/* fsl,drive-strength property */
|
||||
#define MXS_DRIVE_4mA 0
|
||||
#define MXS_DRIVE_8mA 1
|
||||
#define MXS_DRIVE_12mA 2
|
||||
#define MXS_DRIVE_16mA 3
|
||||
|
||||
/* fsl,voltage property */
|
||||
#define MXS_VOLTAGE_LOW 0
|
||||
#define MXS_VOLTAGE_HIGH 1
|
||||
|
||||
/* fsl,pull-up property */
|
||||
#define MXS_PULL_DISABLE 0
|
||||
#define MXS_PULL_ENABLE 1
|
||||
|
||||
#endif /* __DT_BINDINGS_MXS_PINCTRL_H__ */
|
||||
|
|
@ -0,0 +1,47 @@
|
|||
/*
|
||||
* Copyright 2013 Freescale Semiconductor, Inc.
|
||||
* Copyright 2013 Linaro Limited
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "vf610.dtsi"
|
||||
|
||||
/ {
|
||||
model = "PHYTEC Cosmic/Cosmic+ Board";
|
||||
compatible = "phytec,vf610-cosmic", "fsl,vf610";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyLP1,115200";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x80000000 0x10000000>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
enet_ext {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <50000000>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&fec1 {
|
||||
phy-mode = "rmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_fec1_1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart1_1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -36,6 +36,23 @@
|
|||
|
||||
};
|
||||
|
||||
&dspi0 {
|
||||
bus-num = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_dspi0_1>;
|
||||
status = "okay";
|
||||
|
||||
sflash: at26df081a@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "atmel,at26df081a";
|
||||
spi-max-frequency = <16000000>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&fec0 {
|
||||
phy-mode = "rmii";
|
||||
pinctrl-names = "default";
|
||||
|
|
|
|||
|
|
@ -123,6 +123,18 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
dspi0: dspi0@4002c000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,vf610-dspi";
|
||||
reg = <0x4002c000 0x1000>;
|
||||
interrupts = <0 67 0x04>;
|
||||
clocks = <&clks VF610_CLK_DSPI0>;
|
||||
clock-names = "dspi";
|
||||
spi-num-chipselects = <5>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sai2: sai@40031000 {
|
||||
compatible = "fsl,vf610-sai";
|
||||
reg = <0x40031000 0x1000>;
|
||||
|
|
|
|||
|
|
@ -332,6 +332,11 @@ static void __init crystalfontz_init(void)
|
|||
update_fec_mac_prop(OUI_CRYSTALFONTZ);
|
||||
}
|
||||
|
||||
static void __init m28cu3_init(void)
|
||||
{
|
||||
update_fec_mac_prop(OUI_DENX);
|
||||
}
|
||||
|
||||
static const char __init *mxs_get_soc_id(void)
|
||||
{
|
||||
struct device_node *np;
|
||||
|
|
@ -459,6 +464,8 @@ static void __init mxs_machine_init(void)
|
|||
apx4devkit_init();
|
||||
else if (of_machine_is_compatible("crystalfontz,cfa10036"))
|
||||
crystalfontz_init();
|
||||
else if (of_machine_is_compatible("msr,m28cu3"))
|
||||
m28cu3_init();
|
||||
|
||||
of_platform_populate(NULL, of_default_bus_match_table,
|
||||
NULL, parent);
|
||||
|
|
|
|||
Loading…
Reference in New Issue