mmc-omap: add support for 16-bit and 32-bit registers

The omap850 and omap730 use 16-bit registers instead of 32-bit, requiring
a modification of the register addresses in the mmc-omap driver.  To
resolve this, a bit shift is performed on base register addresses, either
by 1 or 2 bits depending on the CPU in use.  This yields the correct
registers for each CPU.

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Ben Dooks <ben@fluff.org>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Marek Belisko 2010-05-26 14:41:49 -07:00 committed by Linus Torvalds
parent ca2afb6dbe
commit 0e950fa686
1 changed files with 33 additions and 29 deletions

View File

@ -39,30 +39,30 @@
#include <plat/fpga.h>
#define OMAP_MMC_REG_CMD 0x00
#define OMAP_MMC_REG_ARGL 0x04
#define OMAP_MMC_REG_ARGH 0x08
#define OMAP_MMC_REG_CON 0x0c
#define OMAP_MMC_REG_STAT 0x10
#define OMAP_MMC_REG_IE 0x14
#define OMAP_MMC_REG_CTO 0x18
#define OMAP_MMC_REG_DTO 0x1c
#define OMAP_MMC_REG_DATA 0x20
#define OMAP_MMC_REG_BLEN 0x24
#define OMAP_MMC_REG_NBLK 0x28
#define OMAP_MMC_REG_BUF 0x2c
#define OMAP_MMC_REG_SDIO 0x34
#define OMAP_MMC_REG_REV 0x3c
#define OMAP_MMC_REG_RSP0 0x40
#define OMAP_MMC_REG_RSP1 0x44
#define OMAP_MMC_REG_RSP2 0x48
#define OMAP_MMC_REG_RSP3 0x4c
#define OMAP_MMC_REG_RSP4 0x50
#define OMAP_MMC_REG_RSP5 0x54
#define OMAP_MMC_REG_RSP6 0x58
#define OMAP_MMC_REG_RSP7 0x5c
#define OMAP_MMC_REG_IOSR 0x60
#define OMAP_MMC_REG_SYSC 0x64
#define OMAP_MMC_REG_SYSS 0x68
#define OMAP_MMC_REG_ARGL 0x01
#define OMAP_MMC_REG_ARGH 0x02
#define OMAP_MMC_REG_CON 0x03
#define OMAP_MMC_REG_STAT 0x04
#define OMAP_MMC_REG_IE 0x05
#define OMAP_MMC_REG_CTO 0x06
#define OMAP_MMC_REG_DTO 0x07
#define OMAP_MMC_REG_DATA 0x08
#define OMAP_MMC_REG_BLEN 0x09
#define OMAP_MMC_REG_NBLK 0x0a
#define OMAP_MMC_REG_BUF 0x0b
#define OMAP_MMC_REG_SDIO 0x0d
#define OMAP_MMC_REG_REV 0x0f
#define OMAP_MMC_REG_RSP0 0x10
#define OMAP_MMC_REG_RSP1 0x11
#define OMAP_MMC_REG_RSP2 0x12
#define OMAP_MMC_REG_RSP3 0x13
#define OMAP_MMC_REG_RSP4 0x14
#define OMAP_MMC_REG_RSP5 0x15
#define OMAP_MMC_REG_RSP6 0x16
#define OMAP_MMC_REG_RSP7 0x17
#define OMAP_MMC_REG_IOSR 0x18
#define OMAP_MMC_REG_SYSC 0x19
#define OMAP_MMC_REG_SYSS 0x1a
#define OMAP_MMC_STAT_CARD_ERR (1 << 14)
#define OMAP_MMC_STAT_CARD_IRQ (1 << 13)
@ -78,8 +78,9 @@
#define OMAP_MMC_STAT_CARD_BUSY (1 << 2)
#define OMAP_MMC_STAT_END_OF_CMD (1 << 0)
#define OMAP_MMC_READ(host, reg) __raw_readw((host)->virt_base + OMAP_MMC_REG_##reg)
#define OMAP_MMC_WRITE(host, reg, val) __raw_writew((val), (host)->virt_base + OMAP_MMC_REG_##reg)
#define OMAP_MMC_REG(host, reg) (OMAP_MMC_REG_##reg << (host)->reg_shift)
#define OMAP_MMC_READ(host, reg) __raw_readw((host)->virt_base + OMAP_MMC_REG(host, reg))
#define OMAP_MMC_WRITE(host, reg, val) __raw_writew((val), (host)->virt_base + OMAP_MMC_REG(host, reg))
/*
* Command types
@ -133,6 +134,7 @@ struct mmc_omap_host {
int irq;
unsigned char bus_mode;
unsigned char hw_bus_mode;
unsigned int reg_shift;
struct work_struct cmd_abort_work;
unsigned abort:1;
@ -680,9 +682,9 @@ mmc_omap_xfer_data(struct mmc_omap_host *host, int write)
host->data->bytes_xfered += n;
if (write) {
__raw_writesw(host->virt_base + OMAP_MMC_REG_DATA, host->buffer, n);
__raw_writesw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n);
} else {
__raw_readsw(host->virt_base + OMAP_MMC_REG_DATA, host->buffer, n);
__raw_readsw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n);
}
}
@ -900,7 +902,7 @@ mmc_omap_prepare_dma(struct mmc_omap_host *host, struct mmc_data *data)
int dst_port = 0;
int sync_dev = 0;
data_addr = host->phys_base + OMAP_MMC_REG_DATA;
data_addr = host->phys_base + OMAP_MMC_REG(host, DATA);
frame = data->blksz;
count = sg_dma_len(sg);
@ -1493,6 +1495,8 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
}
}
host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
return 0;
err_plat_cleanup: