mmc-omap: add support for 16-bit and 32-bit registers
The omap850 and omap730 use 16-bit registers instead of 32-bit, requiring a modification of the register addresses in the mmc-omap driver. To resolve this, a bit shift is performed on base register addresses, either by 1 or 2 bits depending on the CPU in use. This yields the correct registers for each CPU. Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Ben Dooks <ben@fluff.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
parent
ca2afb6dbe
commit
0e950fa686
|
@ -39,30 +39,30 @@
|
|||
#include <plat/fpga.h>
|
||||
|
||||
#define OMAP_MMC_REG_CMD 0x00
|
||||
#define OMAP_MMC_REG_ARGL 0x04
|
||||
#define OMAP_MMC_REG_ARGH 0x08
|
||||
#define OMAP_MMC_REG_CON 0x0c
|
||||
#define OMAP_MMC_REG_STAT 0x10
|
||||
#define OMAP_MMC_REG_IE 0x14
|
||||
#define OMAP_MMC_REG_CTO 0x18
|
||||
#define OMAP_MMC_REG_DTO 0x1c
|
||||
#define OMAP_MMC_REG_DATA 0x20
|
||||
#define OMAP_MMC_REG_BLEN 0x24
|
||||
#define OMAP_MMC_REG_NBLK 0x28
|
||||
#define OMAP_MMC_REG_BUF 0x2c
|
||||
#define OMAP_MMC_REG_SDIO 0x34
|
||||
#define OMAP_MMC_REG_REV 0x3c
|
||||
#define OMAP_MMC_REG_RSP0 0x40
|
||||
#define OMAP_MMC_REG_RSP1 0x44
|
||||
#define OMAP_MMC_REG_RSP2 0x48
|
||||
#define OMAP_MMC_REG_RSP3 0x4c
|
||||
#define OMAP_MMC_REG_RSP4 0x50
|
||||
#define OMAP_MMC_REG_RSP5 0x54
|
||||
#define OMAP_MMC_REG_RSP6 0x58
|
||||
#define OMAP_MMC_REG_RSP7 0x5c
|
||||
#define OMAP_MMC_REG_IOSR 0x60
|
||||
#define OMAP_MMC_REG_SYSC 0x64
|
||||
#define OMAP_MMC_REG_SYSS 0x68
|
||||
#define OMAP_MMC_REG_ARGL 0x01
|
||||
#define OMAP_MMC_REG_ARGH 0x02
|
||||
#define OMAP_MMC_REG_CON 0x03
|
||||
#define OMAP_MMC_REG_STAT 0x04
|
||||
#define OMAP_MMC_REG_IE 0x05
|
||||
#define OMAP_MMC_REG_CTO 0x06
|
||||
#define OMAP_MMC_REG_DTO 0x07
|
||||
#define OMAP_MMC_REG_DATA 0x08
|
||||
#define OMAP_MMC_REG_BLEN 0x09
|
||||
#define OMAP_MMC_REG_NBLK 0x0a
|
||||
#define OMAP_MMC_REG_BUF 0x0b
|
||||
#define OMAP_MMC_REG_SDIO 0x0d
|
||||
#define OMAP_MMC_REG_REV 0x0f
|
||||
#define OMAP_MMC_REG_RSP0 0x10
|
||||
#define OMAP_MMC_REG_RSP1 0x11
|
||||
#define OMAP_MMC_REG_RSP2 0x12
|
||||
#define OMAP_MMC_REG_RSP3 0x13
|
||||
#define OMAP_MMC_REG_RSP4 0x14
|
||||
#define OMAP_MMC_REG_RSP5 0x15
|
||||
#define OMAP_MMC_REG_RSP6 0x16
|
||||
#define OMAP_MMC_REG_RSP7 0x17
|
||||
#define OMAP_MMC_REG_IOSR 0x18
|
||||
#define OMAP_MMC_REG_SYSC 0x19
|
||||
#define OMAP_MMC_REG_SYSS 0x1a
|
||||
|
||||
#define OMAP_MMC_STAT_CARD_ERR (1 << 14)
|
||||
#define OMAP_MMC_STAT_CARD_IRQ (1 << 13)
|
||||
|
@ -78,8 +78,9 @@
|
|||
#define OMAP_MMC_STAT_CARD_BUSY (1 << 2)
|
||||
#define OMAP_MMC_STAT_END_OF_CMD (1 << 0)
|
||||
|
||||
#define OMAP_MMC_READ(host, reg) __raw_readw((host)->virt_base + OMAP_MMC_REG_##reg)
|
||||
#define OMAP_MMC_WRITE(host, reg, val) __raw_writew((val), (host)->virt_base + OMAP_MMC_REG_##reg)
|
||||
#define OMAP_MMC_REG(host, reg) (OMAP_MMC_REG_##reg << (host)->reg_shift)
|
||||
#define OMAP_MMC_READ(host, reg) __raw_readw((host)->virt_base + OMAP_MMC_REG(host, reg))
|
||||
#define OMAP_MMC_WRITE(host, reg, val) __raw_writew((val), (host)->virt_base + OMAP_MMC_REG(host, reg))
|
||||
|
||||
/*
|
||||
* Command types
|
||||
|
@ -133,6 +134,7 @@ struct mmc_omap_host {
|
|||
int irq;
|
||||
unsigned char bus_mode;
|
||||
unsigned char hw_bus_mode;
|
||||
unsigned int reg_shift;
|
||||
|
||||
struct work_struct cmd_abort_work;
|
||||
unsigned abort:1;
|
||||
|
@ -680,9 +682,9 @@ mmc_omap_xfer_data(struct mmc_omap_host *host, int write)
|
|||
host->data->bytes_xfered += n;
|
||||
|
||||
if (write) {
|
||||
__raw_writesw(host->virt_base + OMAP_MMC_REG_DATA, host->buffer, n);
|
||||
__raw_writesw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n);
|
||||
} else {
|
||||
__raw_readsw(host->virt_base + OMAP_MMC_REG_DATA, host->buffer, n);
|
||||
__raw_readsw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n);
|
||||
}
|
||||
}
|
||||
|
||||
|
@ -900,7 +902,7 @@ mmc_omap_prepare_dma(struct mmc_omap_host *host, struct mmc_data *data)
|
|||
int dst_port = 0;
|
||||
int sync_dev = 0;
|
||||
|
||||
data_addr = host->phys_base + OMAP_MMC_REG_DATA;
|
||||
data_addr = host->phys_base + OMAP_MMC_REG(host, DATA);
|
||||
frame = data->blksz;
|
||||
count = sg_dma_len(sg);
|
||||
|
||||
|
@ -1493,6 +1495,8 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
|
|||
}
|
||||
}
|
||||
|
||||
host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
|
||||
|
||||
return 0;
|
||||
|
||||
err_plat_cleanup:
|
||||
|
|
Loading…
Reference in New Issue