Merge branches 'common/clkfwk', 'common/pfc' and 'common/serial-rework' into sh-latest

Documentation/ABI/testing/sysfs-block

@@ -206,16 +206,3 @@ Description:
 		when a discarded area is read the discard_zeroes_data
 		parameter will be set to one. Otherwise it will be 0 and
 		the result of reading a discarded area is undefined.
-What:		/sys/block/<disk>/alias
-Date:		Aug 2011
-Contact:	Nao Nishijima <nao.nishijima.xt@hitachi.com>
-Description:
-		A raw device name of a disk does not always point a same disk
-		each boot-up time. Therefore, users have to use persistent
-		device names, which udev creates when the kernel finds a disk,
-		instead of raw device name. However, kernel doesn't show those
-		persistent names on its messages (e.g. dmesg).
-		This file can store an alias of the disk and it would be
-		appeared in kernel messages if it is set. A disk can have an
-		alias which length is up to 255bytes. Users can use alphabets,
-		numbers, "-" and "_" in alias name. This file is writeonce.

Documentation/DocBook/uio-howto.tmpl

@@ -520,6 +520,11 @@ Here's a description of the fields of <varname>struct uio_mem</varname>:
 </para>
 
 <itemizedlist>
+<listitem><para>
+<varname>const char *name</varname>: Optional. Set this to help identify
+the memory region, it will show up in the corresponding sysfs node.
+</para></listitem>
+
 <listitem><para>
 <varname>int memtype</varname>: Required if the mapping is used. Set this to
 <varname>UIO_MEM_PHYS</varname> if you you have physical memory on your
@@ -553,7 +558,7 @@ instead to remember such an address.
 </itemizedlist>
 
 <para>
-Please do not touch the <varname>kobj</varname> element of
+Please do not touch the <varname>map</varname> element of
 <varname>struct uio_mem</varname>! It is used by the UIO framework
 to set up sysfs files for this mapping. Simply leave it alone.
 </para>

Documentation/blockdev/cciss.txt

@@ -98,14 +98,12 @@ You must enable "SCSI tape drive support for Smart Array 5xxx" and
 "SCSI support" in your kernel configuration to be able to use SCSI
 tape drives with your Smart Array 5xxx controller.
 
-Additionally, note that the driver will not engage the SCSI core at init 
+Additionally, note that the driver will engage the SCSI core at init
-time.  The driver must be directed to dynamically engage the SCSI core via 
+time if any tape drives or medium changers are detected.  The driver may
-the /proc filesystem entry which the "block" side of the driver creates as 
+also be directed to dynamically engage the SCSI core via the /proc filesystem
-/proc/driver/cciss/cciss* at runtime.  This is because at driver init time, 
+entry which the "block" side of the driver creates as
-the SCSI core may not yet be initialized (because the driver is a block 
+/proc/driver/cciss/cciss* at runtime.  This is best done via a script.
-driver) and attempting to register it with the SCSI core in such a case 
+
-would cause a hang.  This is best done via an initialization script 
-(typically in /etc/init.d, but could vary depending on distribution). 
 For example:
 
 	for x in /proc/driver/cciss/cciss[0-9]*

Documentation/i2c/ten-bit-addresses

@@ -1,22 +1,24 @@
 The I2C protocol knows about two kinds of device addresses: normal 7 bit
 addresses, and an extended set of 10 bit addresses. The sets of addresses
 do not intersect: the 7 bit address 0x10 is not the same as the 10 bit
-address 0x10 (though a single device could respond to both of them). You
+address 0x10 (though a single device could respond to both of them).
-select a 10 bit address by adding an extra byte after the address
-byte:
-  S Addr7 Rd/Wr ....
-becomes
-  S 11110 Addr10 Rd/Wr
-S is the start bit, Rd/Wr the read/write bit, and if you count the number
-of bits, you will see the there are 8 after the S bit for 7 bit addresses,
-and 16 after the S bit for 10 bit addresses.
 
-WARNING! The current 10 bit address support is EXPERIMENTAL. There are
+I2C messages to and from 10-bit address devices have a different format.
-several places in the code that will cause SEVERE PROBLEMS with 10 bit
+See the I2C specification for the details.
-addresses, even though there is some basic handling and hooks. Also,
-almost no supported adapter handles the 10 bit addresses correctly.
 
-As soon as a real 10 bit address device is spotted 'in the wild', we
+The current 10 bit address support is minimal. It should work, however
-can and will add proper support. Right now, 10 bit address devices
+you can expect some problems along the way:
-are defined by the I2C protocol, but we have never seen a single device
+* Not all bus drivers support 10-bit addresses. Some don't because the
-which supports them.
+  hardware doesn't support them (SMBus doesn't require 10-bit address
+  support for example), some don't because nobody bothered adding the
+  code (or it's there but not working properly.) Software implementation
+  (i2c-algo-bit) is known to work.
+* Some optional features do not support 10-bit addresses. This is the
+  case of automatic detection and instantiation of devices by their,
+  drivers, for example.
+* Many user-space packages (for example i2c-tools) lack support for
+  10-bit addresses.
+
+Note that 10-bit address devices are still pretty rare, so the limitations
+listed above could stay for a long time, maybe even forever if nobody
+needs them to be fixed.

Documentation/networking/ip-sysctl.txt

@@ -20,7 +20,7 @@ ip_no_pmtu_disc - BOOLEAN
 	default FALSE
 
 min_pmtu - INTEGER
-	default 562 - minimum discovered Path MTU
+	default 552 - minimum discovered Path MTU
 
 route/max_size - INTEGER
 	Maximum number of routes allowed in the kernel.  Increase

Documentation/serial/serial-rs485.txt

@@ -97,15 +97,23 @@
 
 	struct serial_rs485 rs485conf;
 
-	/* Set RS485 mode: */
+	/* Enable RS485 mode: */
 	rs485conf.flags |= SER_RS485_ENABLED;
 
+	/* Set logical level for RTS pin equal to 1 when sending: */
+	rs485conf.flags |= SER_RS485_RTS_ON_SEND;
+	/* or, set logical level for RTS pin equal to 0 when sending: */
+	rs485conf.flags &= ~(SER_RS485_RTS_ON_SEND);
+
+	/* Set logical level for RTS pin equal to 1 after sending: */
+	rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
+	/* or, set logical level for RTS pin equal to 0 after sending: */
+	rs485conf.flags &= ~(SER_RS485_RTS_AFTER_SEND);
+
 	/* Set rts delay before send, if needed: */
-	rs485conf.flags |= SER_RS485_RTS_BEFORE_SEND;
 	rs485conf.delay_rts_before_send = ...;
 
 	/* Set rts delay after send, if needed: */
-	rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
 	rs485conf.delay_rts_after_send = ...;
 
 	/* Set this flag if you want to receive data even whilst sending data */

MAINTAINERS

@@ -1789,6 +1789,14 @@ F:	include/net/cfg80211.h
 F:	net/wireless/*
 X:	net/wireless/wext*
 
+CHAR and MISC DRIVERS
+M:	Arnd Bergmann <arnd@arndb.de>
+M:	Greg Kroah-Hartman <greg@kroah.com>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
+S:	Maintained
+F:	drivers/char/*
+F:	drivers/misc/*
+
 CHECKPATCH
 M:	Andy Whitcroft <apw@canonical.com>
 S:	Supported
@@ -1927,10 +1935,11 @@ S:	Maintained
 F:	drivers/connector/
 
 CONTROL GROUPS (CGROUPS)
-M:	Paul Menage <paul@paulmenage.org>
+M:	Tejun Heo <tj@kernel.org>
 M:	Li Zefan <lizf@cn.fujitsu.com>
 L:	containers@lists.linux-foundation.org
 L:	cgroups@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git
 S:	Maintained
 F:	include/linux/cgroup*
 F:	kernel/cgroup*
@@ -2585,7 +2594,7 @@ S:	Maintained
 F:	drivers/net/ethernet/i825xx/eexpress.*
 
 ETHERNET BRIDGE
-M:	Stephen Hemminger <shemminger@linux-foundation.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	bridge@lists.linux-foundation.org
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net:Bridge
@@ -3719,7 +3728,7 @@ F:	fs/jbd2/
 F:	include/linux/jbd2.h
 
 JSM Neo PCI based serial card
-M:	Breno Leitao <leitao@linux.vnet.ibm.com>
+M:	Lucas Tavares <lucaskt@linux.vnet.ibm.com>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/tty/serial/jsm/
@@ -4472,7 +4481,7 @@ S:	Supported
 F:	drivers/infiniband/hw/nes/
 
 NETEM NETWORK EMULATOR
-M:	Stephen Hemminger <shemminger@linux-foundation.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	netem@lists.linux-foundation.org
 S:	Maintained
 F:	net/sched/sch_netem.c
@@ -4949,7 +4958,7 @@ F:	drivers/char/ppdev.c
 F:	include/linux/ppdev.h
 
 PARAVIRT_OPS INTERFACE
-M:	Jeremy Fitzhardinge <jeremy@xensource.com>
+M:	Jeremy Fitzhardinge <jeremy@goop.org>
 M:	Chris Wright <chrisw@sous-sol.org>
 M:	Alok Kataria <akataria@vmware.com>
 M:	Rusty Russell <rusty@rustcorp.com.au>
@@ -5658,7 +5667,6 @@ F:	drivers/media/video/*7146*
 F:	include/media/*7146*
 
 SAMSUNG AUDIO (ASoC) DRIVERS
-M:	Jassi Brar <jassisinghbrar@gmail.com>
 M:	Sangbeom Kim <sbkim73@samsung.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Supported
@@ -5987,7 +5995,7 @@ S:	Maintained
 F:	drivers/usb/misc/sisusbvga/
 
 SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
-M:	Stephen Hemminger <shemminger@linux-foundation.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/marvell/sk*
@@ -7401,8 +7409,8 @@ S:	Maintained
 F:	arch/x86/kernel/cpu/mcheck/*
 
 XEN HYPERVISOR INTERFACE
-M:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+M:	Jeremy Fitzhardinge <jeremy@goop.org>
 L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
 L:	virtualization@lists.linux-foundation.org
 S:	Supported
@@ -7435,7 +7443,8 @@ F:	drivers/xen/*swiotlb*
 
 XFS FILESYSTEM
 P:	Silicon Graphics Inc
-M:	Alex Elder <aelder@sgi.com>
+M:	Ben Myers <bpm@sgi.com>
+M:	Alex Elder <elder@kernel.org>
 M:	xfs-masters@oss.sgi.com
 L:	xfs@oss.sgi.com
 W:	http://oss.sgi.com/projects/xfs

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 2
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/arm/boot/Makefile

@@ -65,6 +65,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts
 
 $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
 
+clean-files := *.dtb
+
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
 		   -C none -a $(LOADADDR) -e $(STARTADDR) \

arch/arm/include/asm/hardware/cache-l2x0.h

@@ -20,6 +20,8 @@
 #ifndef __ASM_ARM_HARDWARE_L2X0_H
 #define __ASM_ARM_HARDWARE_L2X0_H
 
+#include <linux/errno.h>
+
 #define L2X0_CACHE_ID			0x000
 #define L2X0_CACHE_TYPE			0x004
 #define L2X0_CTRL			0x100

arch/arm/include/asm/mach/arch.h

@@ -13,6 +13,7 @@
 struct tag;
 struct meminfo;
 struct sys_timer;
+struct pt_regs;
 
 struct machine_desc {
 	unsigned int		nr;		/* architecture number	*/

arch/arm/include/asm/unistd.h

@@ -402,6 +402,8 @@
 #define __NR_syncfs			(__NR_SYSCALL_BASE+373)
 #define __NR_sendmmsg			(__NR_SYSCALL_BASE+374)
 #define __NR_setns			(__NR_SYSCALL_BASE+375)
+#define __NR_process_vm_readv		(__NR_SYSCALL_BASE+376)
+#define __NR_process_vm_writev		(__NR_SYSCALL_BASE+377)
 
 /*
  * The following SWIs are ARM private.

arch/arm/kernel/calls.S

@@ -385,6 +385,8 @@
 		CALL(sys_syncfs)
 		CALL(sys_sendmmsg)
 /* 375 */	CALL(sys_setns)
+		CALL(sys_process_vm_readv)
+		CALL(sys_process_vm_writev)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted

arch/arm/kernel/head.S

@@ -360,7 +360,7 @@ __secondary_data:
  *  r13 = *virtual* address to jump to upon completion
  */
 __enable_mmu:
-#ifdef CONFIG_ALIGNMENT_TRAP
+#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
 	orr	r0, r0, #CR_A
 #else
 	bic	r0, r0, #CR_A

arch/arm/kernel/machine_kexec.c

@@ -32,24 +32,6 @@ static atomic_t waiting_for_crash_ipi;
 
 int machine_kexec_prepare(struct kimage *image)
 {
-	unsigned long page_list;
-	void *reboot_code_buffer;
-	page_list = image->head & PAGE_MASK;
-
-	reboot_code_buffer = page_address(image->control_code_page);
-
-	/* Prepare parameters for reboot_code_buffer*/
-	kexec_start_address = image->start;
-	kexec_indirection_page = page_list;
-	kexec_mach_type = machine_arch_type;
-	kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
-
-	/* copy our kernel relocation code to the control code page */
-	memcpy(reboot_code_buffer,
-	       relocate_new_kernel, relocate_new_kernel_size);
-
-	flush_icache_range((unsigned long) reboot_code_buffer,
-			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	return 0;
 }
 
@@ -100,14 +82,31 @@ void (*kexec_reinit)(void);
 
 void machine_kexec(struct kimage *image)
 {
+	unsigned long page_list;
 	unsigned long reboot_code_buffer_phys;
 	void *reboot_code_buffer;
 
+
+	page_list = image->head & PAGE_MASK;
+
 	/* we need both effective and real address here */
 	reboot_code_buffer_phys =
 	    page_to_pfn(image->control_code_page) << PAGE_SHIFT;
 	reboot_code_buffer = page_address(image->control_code_page);
 
+	/* Prepare parameters for reboot_code_buffer*/
+	kexec_start_address = image->start;
+	kexec_indirection_page = page_list;
+	kexec_mach_type = machine_arch_type;
+	kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
+
+	/* copy our kernel relocation code to the control code page */
+	memcpy(reboot_code_buffer,
+	       relocate_new_kernel, relocate_new_kernel_size);
+
+
+	flush_icache_range((unsigned long) reboot_code_buffer,
+			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	printk(KERN_INFO "Bye!\n");
 
 	if (kexec_reinit)

arch/arm/kernel/setup.c

@@ -461,8 +461,10 @@ static void __init setup_processor(void)
 	       cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
 	       proc_arch[cpu_architecture()], cr_alignment);
 
-	sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS);
+	snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c",
-	sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
+		 list->arch_name, ENDIANNESS);
+	snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c",
+		 list->elf_name, ENDIANNESS);
 	elf_hwcap = list->elf_hwcap;
 #ifndef CONFIG_ARM_THUMB
 	elf_hwcap &= ~HWCAP_THUMB;

arch/arm/mach-bcmring/core.c

@@ -235,7 +235,7 @@ void __init bcmring_init_timer(void)
 	 */
 	bcmring_clocksource_init();
 
-	sp804_clockevents_register(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
+	sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
 }
 
 struct sys_timer bcmring_timer = {

arch/arm/mach-bcmring/dma.c

@@ -36,6 +36,7 @@
 #include <linux/mm.h>
 #include <linux/pfn.h>
 #include <linux/atomic.h>
+#include <linux/sched.h>
 #include <mach/dma.h>
 
 /* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */

arch/arm/mach-shmobile/clock-sh7372.c

@@ -411,11 +411,11 @@ static struct clk *fsibckcr_parent[] = {
 };
 
 static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
-	[DIV6_HDMI] = SH_CLK_DIV6_EXT(&pllc1_div2_clk, HDMICKCR, 0,
+	[DIV6_HDMI] = SH_CLK_DIV6_EXT(HDMICKCR, 0,
 				      hdmi_parent, ARRAY_SIZE(hdmi_parent), 6, 2),
-	[DIV6_FSIA] = SH_CLK_DIV6_EXT(&pllc1_div2_clk, FSIACKCR, 0,
+	[DIV6_FSIA] = SH_CLK_DIV6_EXT(FSIACKCR, 0,
 				      fsiackcr_parent, ARRAY_SIZE(fsiackcr_parent), 6, 2),
-	[DIV6_FSIB] = SH_CLK_DIV6_EXT(&pllc1_div2_clk, FSIBCKCR, 0,
+	[DIV6_FSIB] = SH_CLK_DIV6_EXT(FSIBCKCR, 0,
 				      fsibckcr_parent, ARRAY_SIZE(fsibckcr_parent), 6, 2),
 };
 

arch/arm/mach-shmobile/clock-sh73a0.c

@@ -92,6 +92,24 @@ static struct clk_ops div2_clk_ops = {
 	.recalc		= div2_recalc,
 };
 
+static unsigned long div7_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 7;
+}
+
+static struct clk_ops div7_clk_ops = {
+	.recalc		= div7_recalc,
+};
+
+static unsigned long div13_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 13;
+}
+
+static struct clk_ops div13_clk_ops = {
+	.recalc		= div13_recalc,
+};
+
 /* Divide extal1 by two */
 static struct clk extal1_div2_clk = {
 	.ops		= &div2_clk_ops,
@@ -113,6 +131,11 @@ static struct clk main_clk = {
 	.ops		= &main_clk_ops,
 };
 
+static struct clk main_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &main_clk,
+};
+
 /* PLL0, PLL1, PLL2, PLL3 */
 static unsigned long pll_recalc(struct clk *clk)
 {
@@ -168,12 +191,29 @@ static struct clk pll3_clk = {
 	.enable_bit	= 3,
 };
 
-/* Divide PLL1 by two */
+/* Divide PLL */
 static struct clk pll1_div2_clk = {
 	.ops		= &div2_clk_ops,
 	.parent		= &pll1_clk,
 };
 
+static struct clk pll1_div7_clk = {
+	.ops		= &div7_clk_ops,
+	.parent		= &pll1_clk,
+};
+
+static struct clk pll1_div13_clk = {
+	.ops		= &div13_clk_ops,
+	.parent		= &pll1_clk,
+};
+
+/* External input clock */
+struct clk sh73a0_extcki_clk = {
+};
+
+struct clk sh73a0_extalr_clk = {
+};
+
 static struct clk *main_clks[] = {
 	&r_clk,
 	&sh73a0_extal1_clk,
@@ -181,11 +221,16 @@ static struct clk *main_clks[] = {
 	&extal1_div2_clk,
 	&extal2_div2_clk,
 	&main_clk,
+	&main_div2_clk,
 	&pll0_clk,
 	&pll1_clk,
 	&pll2_clk,
 	&pll3_clk,
 	&pll1_div2_clk,
+	&pll1_div7_clk,
+	&pll1_div13_clk,
+	&sh73a0_extcki_clk,
+	&sh73a0_extalr_clk,
 };
 
 static void div4_kick(struct clk *clk)
@@ -239,27 +284,84 @@ enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_ZB1,
 	DIV6_DSIT, DIV6_DSI0P, DIV6_DSI1P,
 	DIV6_NR };
 
+static struct clk *vck_parent[8] = {
+	[0] = &pll1_div2_clk,
+	[1] = &pll2_clk,
+	[2] = &sh73a0_extcki_clk,
+	[3] = &sh73a0_extal2_clk,
+	[4] = &main_div2_clk,
+	[5] = &sh73a0_extalr_clk,
+	[6] = &main_clk,
+};
+
+static struct clk *pll_parent[4] = {
+	[0] = &pll1_div2_clk,
+	[1] = &pll2_clk,
+	[2] = &pll1_div13_clk,
+};
+
+static struct clk *hsi_parent[4] = {
+	[0] = &pll1_div2_clk,
+	[1] = &pll2_clk,
+	[2] = &pll1_div7_clk,
+};
+
+static struct clk *pll_extal2_parent[] = {
+	[0] = &pll1_div2_clk,
+	[1] = &pll2_clk,
+	[2] = &sh73a0_extal2_clk,
+	[3] = &sh73a0_extal2_clk,
+};
+
+static struct clk *dsi_parent[8] = {
+	[0] = &pll1_div2_clk,
+	[1] = &pll2_clk,
+	[2] = &main_clk,
+	[3] = &sh73a0_extal2_clk,
+	[4] = &sh73a0_extcki_clk,
+};
+
 static struct clk div6_clks[DIV6_NR] = {
-	[DIV6_VCK1] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR1, 0),
+	[DIV6_VCK1] = SH_CLK_DIV6_EXT(VCLKCR1, 0,
-	[DIV6_VCK2] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR2, 0),
+			vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
-	[DIV6_VCK3] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR3, 0),
+	[DIV6_VCK2] = SH_CLK_DIV6_EXT(VCLKCR2, 0,
-	[DIV6_ZB1] = SH_CLK_DIV6(&pll1_div2_clk, ZBCKCR, 0),
+			vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
-	[DIV6_FLCTL] = SH_CLK_DIV6(&pll1_div2_clk, FLCKCR, 0),
+	[DIV6_VCK3] = SH_CLK_DIV6_EXT(VCLKCR3, 0,
-	[DIV6_SDHI0] = SH_CLK_DIV6(&pll1_div2_clk, SD0CKCR, 0),
+			vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
-	[DIV6_SDHI1] = SH_CLK_DIV6(&pll1_div2_clk, SD1CKCR, 0),
+	[DIV6_ZB1] = SH_CLK_DIV6_EXT(ZBCKCR, 0,
-	[DIV6_SDHI2] = SH_CLK_DIV6(&pll1_div2_clk, SD2CKCR, 0),
+			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_FSIA] = SH_CLK_DIV6(&pll1_div2_clk, FSIACKCR, 0),
+	[DIV6_FLCTL] = SH_CLK_DIV6_EXT(FLCKCR, 0,
-	[DIV6_FSIB] = SH_CLK_DIV6(&pll1_div2_clk, FSIBCKCR, 0),
+			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_SUB] = SH_CLK_DIV6(&sh73a0_extal2_clk, SUBCKCR, 0),
+	[DIV6_SDHI0] = SH_CLK_DIV6_EXT(SD0CKCR, 0,
-	[DIV6_SPUA] = SH_CLK_DIV6(&pll1_div2_clk, SPUACKCR, 0),
+			pll_parent, ARRAY_SIZE(pll_parent), 6, 2),
-	[DIV6_SPUV] = SH_CLK_DIV6(&pll1_div2_clk, SPUVCKCR, 0),
+	[DIV6_SDHI1] = SH_CLK_DIV6_EXT(SD1CKCR, 0,
-	[DIV6_MSU] = SH_CLK_DIV6(&pll1_div2_clk, MSUCKCR, 0),
+			pll_parent, ARRAY_SIZE(pll_parent), 6, 2),
-	[DIV6_HSI] = SH_CLK_DIV6(&pll1_div2_clk, HSICKCR, 0),
+	[DIV6_SDHI2] = SH_CLK_DIV6_EXT(SD2CKCR, 0,
-	[DIV6_MFG1] = SH_CLK_DIV6(&pll1_div2_clk, MFCK1CR, 0),
+			pll_parent, ARRAY_SIZE(pll_parent), 6, 2),
-	[DIV6_MFG2] = SH_CLK_DIV6(&pll1_div2_clk, MFCK2CR, 0),
+	[DIV6_FSIA] = SH_CLK_DIV6_EXT(FSIACKCR, 0,
-	[DIV6_DSIT] = SH_CLK_DIV6(&pll1_div2_clk, DSITCKCR, 0),
+			pll_parent, ARRAY_SIZE(pll_parent), 6, 1),
-	[DIV6_DSI0P] = SH_CLK_DIV6(&pll1_div2_clk, DSI0PCKCR, 0),
+	[DIV6_FSIB] = SH_CLK_DIV6_EXT(FSIBCKCR, 0,
-	[DIV6_DSI1P] = SH_CLK_DIV6(&pll1_div2_clk, DSI1PCKCR, 0),
+			pll_parent, ARRAY_SIZE(pll_parent), 6, 1),
+	[DIV6_SUB] = SH_CLK_DIV6_EXT(SUBCKCR, 0,
+			pll_extal2_parent, ARRAY_SIZE(pll_extal2_parent), 6, 2),
+	[DIV6_SPUA] = SH_CLK_DIV6_EXT(SPUACKCR, 0,
+			pll_extal2_parent, ARRAY_SIZE(pll_extal2_parent), 6, 2),
+	[DIV6_SPUV] = SH_CLK_DIV6_EXT(SPUVCKCR, 0,
+			pll_extal2_parent, ARRAY_SIZE(pll_extal2_parent), 6, 2),
+	[DIV6_MSU] = SH_CLK_DIV6_EXT(MSUCKCR, 0,
+			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
+	[DIV6_HSI] = SH_CLK_DIV6_EXT(HSICKCR, 0,
+			hsi_parent, ARRAY_SIZE(hsi_parent), 6, 2),
+	[DIV6_MFG1] = SH_CLK_DIV6_EXT(MFCK1CR, 0,
+			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
+	[DIV6_MFG2] = SH_CLK_DIV6_EXT(MFCK2CR, 0,
+			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
+	[DIV6_DSIT] = SH_CLK_DIV6_EXT(DSITCKCR, 0,
+			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
+	[DIV6_DSI0P] = SH_CLK_DIV6_EXT(DSI0PCKCR, 0,
+			dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
+	[DIV6_DSI1P] = SH_CLK_DIV6_EXT(DSI1PCKCR, 0,
+			dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
 };
 
 enum { MSTP001,
@@ -387,7 +489,7 @@ void __init sh73a0_clock_init(void)
 		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
 
 	if (!ret)
-		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+		ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR);
 
 	if (!ret)
 		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);

arch/arm/mach-shmobile/include/mach/common.h

@@ -47,6 +47,8 @@ extern void sh73a0_clock_init(void);
 extern void sh73a0_pinmux_init(void);
 extern struct clk sh73a0_extal1_clk;
 extern struct clk sh73a0_extal2_clk;
+extern struct clk sh73a0_extcki_clk;
+extern struct clk sh73a0_extalr_clk;
 
 extern unsigned int sh73a0_get_core_count(void);
 extern void sh73a0_secondary_init(unsigned int cpu);

arch/arm/mach-shmobile/pm-sh7372.c

@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/bitrev.h>
+#include <linux/console.h>
 #include <asm/system.h>
 #include <asm/io.h>
 #include <asm/tlbflush.h>
@@ -106,9 +107,8 @@ static int pd_power_down(struct generic_pm_domain *genpd)
 	return 0;
 }
 
-static int pd_power_up(struct generic_pm_domain *genpd)
+static int __pd_power_up(struct sh7372_pm_domain *sh7372_pd, bool do_resume)
 {
-	struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd);
 	unsigned int mask = 1 << sh7372_pd->bit_shift;
 	unsigned int retry_count;
 	int ret = 0;
@@ -123,13 +123,13 @@ static int pd_power_up(struct generic_pm_domain *genpd)
 
 	for (retry_count = 2 * PSTR_RETRIES; retry_count; retry_count--) {
 		if (!(__raw_readl(SWUCR) & mask))
-			goto out;
+			break;
 		if (retry_count > PSTR_RETRIES)
 			udelay(PSTR_DELAY_US);
 		else
 			cpu_relax();
 	}
-	if (__raw_readl(SWUCR) & mask)
+	if (!retry_count)
 		ret = -EIO;
 
 	if (!sh7372_pd->no_debug)
@@ -137,12 +137,17 @@ static int pd_power_up(struct generic_pm_domain *genpd)
 			 mask, __raw_readl(PSTR));
 
  out:
-	if (ret == 0 && sh7372_pd->resume)
+	if (ret == 0 && sh7372_pd->resume && do_resume)
 		sh7372_pd->resume();
 
 	return ret;
 }
 
+static int pd_power_up(struct generic_pm_domain *genpd)
+{
+	 return __pd_power_up(to_sh7372_pd(genpd), true);
+}
+
 static void sh7372_a4r_suspend(void)
 {
 	sh7372_intcs_suspend();
@@ -174,7 +179,7 @@ void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd)
 	genpd->active_wakeup = pd_active_wakeup;
 	genpd->power_off = pd_power_down;
 	genpd->power_on = pd_power_up;
-	genpd->power_on(&sh7372_pd->genpd);
+	__pd_power_up(sh7372_pd, false);
 }
 
 void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd,
@@ -227,11 +232,23 @@ struct sh7372_pm_domain sh7372_a3sp = {
 	.no_debug = true,
 };
 
+static void sh7372_a3sp_init(void)
+{
+	/* serial consoles make use of SCIF hardware located in A3SP,
+	 * keep such power domain on if "no_console_suspend" is set.
+	 */
+	sh7372_a3sp.stay_on = !console_suspend_enabled;
+}
+
 struct sh7372_pm_domain sh7372_a3sg = {
 	.bit_shift = 13,
 };
 
-#endif /* CONFIG_PM */
+#else /* !CONFIG_PM */
+
+static inline void sh7372_a3sp_init(void) {}
+
+#endif /* !CONFIG_PM */
 
 #if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE)
 static int sh7372_do_idle_core_standby(unsigned long unused)
@@ -465,6 +482,8 @@ void __init sh7372_pm_init(void)
 	/* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */
 	__raw_writel(0, PDNSEL);
 
+	sh7372_a3sp_init();
+
 	sh7372_suspend_init();
 	sh7372_cpuidle_init();
 }

arch/arm/mach-w90x900/dev.c

@@ -422,7 +422,7 @@ struct platform_device nuc900_device_kpi = {
 
 /* LCD controller*/
 
-static struct nuc900fb_display __initdata nuc900_lcd_info[] = {
+static struct nuc900fb_display nuc900_lcd_info[] = {
 	/* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
 	[0] = {
 		.type		= LCM_DCCS_VA_SRC_RGB565,
@@ -445,7 +445,7 @@ static struct nuc900fb_display __initdata nuc900_lcd_info[] = {
 	},
 };
 
-static struct nuc900fb_mach_info nuc900_fb_info __initdata = {
+static struct nuc900fb_mach_info nuc900_fb_info = {
 #if defined(CONFIG_GPM1040A0_320X240)
 	.displays		= &nuc900_lcd_info[0],
 #else

arch/arm/mach-w90x900/include/mach/mfp.h

@@ -19,6 +19,7 @@
 extern void mfp_set_groupf(struct device *dev);
 extern void mfp_set_groupc(struct device *dev);
 extern void mfp_set_groupi(struct device *dev);
-extern void mfp_set_groupg(struct device *dev);
+extern void mfp_set_groupg(struct device *dev, const char *subname);
+extern void mfp_set_groupd(struct device *dev, const char *subname);
 
 #endif /* __ASM_ARCH_MFP_H */

arch/arm/mach-w90x900/include/mach/nuc900_spi.h

@@ -14,7 +14,7 @@
 #ifndef __ASM_ARCH_SPI_H
 #define __ASM_ARCH_SPI_H
 
-extern void mfp_set_groupg(struct device *dev);
+extern void mfp_set_groupg(struct device *dev, const char *subname);
 
 struct nuc900_spi_info {
 	unsigned int num_cs;

arch/arm/mach-w90x900/mfp.c

@@ -26,10 +26,8 @@
 #define REG_MFSEL	(W90X900_VA_GCR + 0xC)
 
 #define GPSELF		(0x01 << 1)
-
 #define GPSELC		(0x03 << 2)
-#define ENKPI		(0x02 << 2)
+#define GPSELD		(0x0f << 4)
-#define ENNAND		(0x01 << 2)
 
 #define GPSELEI0	(0x01 << 26)
 #define GPSELEI1	(0x01 << 27)
@@ -37,11 +35,16 @@
 #define GPIOG0TO1	(0x03 << 14)
 #define GPIOG2TO3	(0x03 << 16)
 #define GPIOG22TO23	(0x03 << 22)
+#define GPIOG18TO20	(0x07 << 18)
 
 #define ENSPI		(0x0a << 14)
 #define ENI2C0		(0x01 << 14)
 #define ENI2C1		(0x01 << 16)
 #define ENAC97		(0x02 << 22)
+#define ENSD1		(0x02 << 18)
+#define ENSD0		(0x0a << 4)
+#define ENKPI		(0x02 << 2)
+#define ENNAND		(0x01 << 2)
 
 static DEFINE_MUTEX(mfp_mutex);
 
@@ -127,15 +130,18 @@ void mfp_set_groupi(struct device *dev)
 }
 EXPORT_SYMBOL(mfp_set_groupi);
 
-void mfp_set_groupg(struct device *dev)
+void mfp_set_groupg(struct device *dev, const char *subname)
 {
 	unsigned long mfpen;
 	const char *dev_id;
 
-	BUG_ON(!dev);
+	BUG_ON((!dev) && (!subname));
 
 	mutex_lock(&mfp_mutex);
 
+	if (subname != NULL)
+		dev_id = subname;
+	else
 		dev_id = dev_name(dev);
 
 	mfpen = __raw_readl(REG_MFSEL);
@@ -152,6 +158,9 @@ void mfp_set_groupg(struct device *dev)
 	} else if (strcmp(dev_id, "nuc900-audio") == 0) {
 		mfpen &= ~(GPIOG22TO23);
 		mfpen |= ENAC97;/*enable AC97*/
+	} else if (strcmp(dev_id, "nuc900-mmc-port1") == 0) {
+		mfpen &= ~(GPIOG18TO20);
+		mfpen |= (ENSD1 | 0x01);/*enable sd1*/
 	} else {
 		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
 	}
@@ -162,3 +171,30 @@ void mfp_set_groupg(struct device *dev)
 }
 EXPORT_SYMBOL(mfp_set_groupg);
 
+void mfp_set_groupd(struct device *dev, const char *subname)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON((!dev) && (!subname));
+
+	mutex_lock(&mfp_mutex);
+
+	if (subname != NULL)
+		dev_id = subname;
+	else
+		dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "nuc900-mmc-port0") == 0) {
+		mfpen &= ~GPSELD;/*enable sd0*/
+		mfpen |= ENSD0;
+	} else
+		mfpen &= (~GPSELD);
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupd);

arch/cris/arch-v10/drivers/Kconfig

@@ -3,7 +3,7 @@ if ETRAX_ARCH_V10
 config ETRAX_ETHERNET
 	bool "Ethernet support"
 	depends on ETRAX_ARCH_V10
-	select NET_ETHERNET
+	select ETHERNET
 	select NET_CORE
 	select MII
 	help

arch/cris/arch-v32/drivers/Kconfig

@@ -3,7 +3,7 @@ if ETRAX_ARCH_V32
 config ETRAX_ETHERNET
 	bool "Ethernet support"
 	depends on ETRAX_ARCH_V32
-	select NET_ETHERNET
+	select ETHERNET
 	select NET_CORE
 	select MII
 	help

arch/microblaze/include/asm/namei.h

@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_NAMEI_H
-#define _ASM_MICROBLAZE_NAMEI_H
-
-#ifdef __KERNEL__
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-#define __emul_prefix() NULL
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_MICROBLAZE_NAMEI_H */

arch/powerpc/Kconfig

@@ -345,7 +345,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE
 
 config KEXEC
 	bool "kexec system call (EXPERIMENTAL)"
-	depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !47x)) && EXPERIMENTAL
+	depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !PPC_47x)) && EXPERIMENTAL
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot

arch/powerpc/Makefile

@@ -255,12 +255,6 @@ checkbin:
 		echo 'disable kernel modules' ; \
 		false ; \
 	fi
-	@if ! /bin/echo dssall | $(AS) -many -o $(TOUT) >/dev/null 2>&1 ; then \
-		echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build ' ; \
-		echo 'correctly with old versions of binutils.' ; \
-		echo '*** Please upgrade your binutils to 2.12.1 or newer' ; \
-		false ; \
-	fi
 
 CLEAN_FILES += $(TOUT)
 

arch/powerpc/boot/dts/p1023rds.dts

@@ -449,6 +449,7 @@
 			interrupt-parent = <&mpic>;
 			interrupts = <16 2>;
 			interrupt-map-mask = <0xf800 0 0 7>;
+			/* IRQ[0:3] are pulled up on board, set to active-low */
 			interrupt-map = <
 				/* IDSEL 0x0 */
 				0000 0 0 1 &mpic 0 1
@@ -488,11 +489,15 @@
 			interrupt-parent = <&mpic>;
 			interrupts = <16 2>;
 			interrupt-map-mask = <0xf800 0 0 7>;
+			/*
+			 * IRQ[4:6] only for PCIe, set to active-high,
+			 * IRQ[7] is pulled up on board, set to active-low
+			 */
 			interrupt-map = <
 				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 4 1
+				0000 0 0 1 &mpic 4 2
-				0000 0 0 2 &mpic 5 1
+				0000 0 0 2 &mpic 5 2
-				0000 0 0 3 &mpic 6 1
+				0000 0 0 3 &mpic 6 2
 				0000 0 0 4 &mpic 7 1
 				>;
 			ranges = <0x2000000 0x0 0xa0000000
@@ -527,12 +532,16 @@
 			interrupt-parent = <&mpic>;
 			interrupts = <16 2>;
 			interrupt-map-mask = <0xf800 0 0 7>;
+			/*
+			 * IRQ[8:10] are pulled up on board, set to active-low
+			 * IRQ[11] only for PCIe, set to active-high,
+			 */
 			interrupt-map = <
 				/* IDSEL 0x0 */
 				0000 0 0 1 &mpic 8 1
 				0000 0 0 2 &mpic 9 1
 				0000 0 0 3 &mpic 10 1
-				0000 0 0 4 &mpic 11 1
+				0000 0 0 4 &mpic 11 2
 				>;
 			ranges = <0x2000000 0x0 0x80000000
 				  0x2000000 0x0 0x80000000

arch/powerpc/configs/ppc44x_defconfig

@@ -52,6 +52,8 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_NDFC=m
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_GLUEBI=m
 CONFIG_PROC_DEVICETREE=y

arch/powerpc/include/asm/atomic.h

@@ -49,13 +49,13 @@ static __inline__ int atomic_add_return(int a, atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	lwarx	%0,0,%2		# atomic_add_return\n\
 	add	%0,%1,%0\n"
 	PPC405_ERR77(0,%2)
 "	stwcx.	%0,0,%2 \n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -85,13 +85,13 @@ static __inline__ int atomic_sub_return(int a, atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	lwarx	%0,0,%2		# atomic_sub_return\n\
 	subf	%0,%1,%0\n"
 	PPC405_ERR77(0,%2)
 "	stwcx.	%0,0,%2 \n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -119,13 +119,13 @@ static __inline__ int atomic_inc_return(atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	lwarx	%0,0,%1		# atomic_inc_return\n\
 	addic	%0,%0,1\n"
 	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1 \n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -163,13 +163,13 @@ static __inline__ int atomic_dec_return(atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	lwarx	%0,0,%1		# atomic_dec_return\n\
 	addic	%0,%0,-1\n"
 	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1\n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -194,7 +194,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
 	int t;
 
 	__asm__ __volatile__ (
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	lwarx	%0,0,%1		# __atomic_add_unless\n\
 	cmpw	0,%0,%3 \n\
 	beq-	2f \n\
@@ -202,7 +202,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
 	PPC405_ERR77(0,%2)
 "	stwcx.	%0,0,%1 \n\
 	bne-	1b \n"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 "	subf	%0,%2,%0 \n\
 2:"
 	: "=&r" (t)
@@ -226,7 +226,7 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	lwarx	%0,0,%1		# atomic_dec_if_positive\n\
 	cmpwi	%0,1\n\
 	addi	%0,%0,-1\n\
@@ -234,7 +234,7 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v)
 	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1\n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	"\n\
 2:"	: "=&b" (t)
 	: "r" (&v->counter)
@@ -285,12 +285,12 @@ static __inline__ long atomic64_add_return(long a, atomic64_t *v)
 	long t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	ldarx	%0,0,%2		# atomic64_add_return\n\
 	add	%0,%1,%0\n\
 	stdcx.	%0,0,%2 \n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -319,12 +319,12 @@ static __inline__ long atomic64_sub_return(long a, atomic64_t *v)
 	long t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	ldarx	%0,0,%2		# atomic64_sub_return\n\
 	subf	%0,%1,%0\n\
 	stdcx.	%0,0,%2 \n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -351,12 +351,12 @@ static __inline__ long atomic64_inc_return(atomic64_t *v)
 	long t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	ldarx	%0,0,%1		# atomic64_inc_return\n\
 	addic	%0,%0,1\n\
 	stdcx.	%0,0,%1 \n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -393,12 +393,12 @@ static __inline__ long atomic64_dec_return(atomic64_t *v)
 	long t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	ldarx	%0,0,%1		# atomic64_dec_return\n\
 	addic	%0,%0,-1\n\
 	stdcx.	%0,0,%1\n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -418,13 +418,13 @@ static __inline__ long atomic64_dec_if_positive(atomic64_t *v)
 	long t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	ldarx	%0,0,%1		# atomic64_dec_if_positive\n\
 	addic.	%0,%0,-1\n\
 	blt-	2f\n\
 	stdcx.	%0,0,%1\n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	"\n\
 2:"	: "=&r" (t)
 	: "r" (&v->counter)
@@ -450,14 +450,14 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
 	long t;
 
 	__asm__ __volatile__ (
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	ldarx	%0,0,%1		# __atomic_add_unless\n\
 	cmpd	0,%0,%3 \n\
 	beq-	2f \n\
 	add	%0,%2,%0 \n"
 "	stdcx.	%0,0,%1 \n\
 	bne-	1b \n"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 "	subf	%0,%2,%0 \n\
 2:"
 	: "=&r" (t)

arch/powerpc/include/asm/bitops.h

@@ -124,14 +124,14 @@ static __inline__ unsigned long fn(			\
 	return (old & mask);				\
 }
 
-DEFINE_TESTOP(test_and_set_bits, or, PPC_RELEASE_BARRIER,
+DEFINE_TESTOP(test_and_set_bits, or, PPC_ATOMIC_ENTRY_BARRIER,
-	      PPC_ACQUIRE_BARRIER, 0)
+	      PPC_ATOMIC_EXIT_BARRIER, 0)
 DEFINE_TESTOP(test_and_set_bits_lock, or, "",
 	      PPC_ACQUIRE_BARRIER, 1)
-DEFINE_TESTOP(test_and_clear_bits, andc, PPC_RELEASE_BARRIER,
+DEFINE_TESTOP(test_and_clear_bits, andc, PPC_ATOMIC_ENTRY_BARRIER,
-	      PPC_ACQUIRE_BARRIER, 0)
+	      PPC_ATOMIC_EXIT_BARRIER, 0)
-DEFINE_TESTOP(test_and_change_bits, xor, PPC_RELEASE_BARRIER,
+DEFINE_TESTOP(test_and_change_bits, xor, PPC_ATOMIC_ENTRY_BARRIER,
-	      PPC_ACQUIRE_BARRIER, 0)
+	      PPC_ATOMIC_EXIT_BARRIER, 0)
 
 static __inline__ int test_and_set_bit(unsigned long nr,
 				       volatile unsigned long *addr)

arch/powerpc/include/asm/futex.h

@@ -11,12 +11,13 @@
 
 #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
   __asm__ __volatile ( \
-	PPC_RELEASE_BARRIER \
+	PPC_ATOMIC_ENTRY_BARRIER \
 "1:	lwarx	%0,0,%2\n" \
 	insn \
 	PPC405_ERR77(0, %2) \
 "2:	stwcx.	%1,0,%2\n" \
 	"bne-	1b\n" \
+	PPC_ATOMIC_EXIT_BARRIER \
 	"li	%1,0\n" \
 "3:	.section .fixup,\"ax\"\n" \
 "4:	li	%1,%3\n" \
@@ -92,14 +93,14 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		return -EFAULT;
 
         __asm__ __volatile__ (
-        PPC_RELEASE_BARRIER
+        PPC_ATOMIC_ENTRY_BARRIER
 "1:     lwarx   %1,0,%3         # futex_atomic_cmpxchg_inatomic\n\
         cmpw    0,%1,%4\n\
         bne-    3f\n"
         PPC405_ERR77(0,%3)
 "2:     stwcx.  %5,0,%3\n\
         bne-    1b\n"
-        PPC_ACQUIRE_BARRIER
+        PPC_ATOMIC_EXIT_BARRIER
 "3:	.section .fixup,\"ax\"\n\
 4:	li	%0,%6\n\
 	b	3b\n\

arch/powerpc/include/asm/kvm.h

@@ -148,12 +148,6 @@ struct kvm_regs {
 #define KVM_SREGS_E_UPDATE_DEC		(1 << 2)
 #define KVM_SREGS_E_UPDATE_DBSR		(1 << 3)
 
-/*
- * Book3S special bits to indicate contents in the struct by maintaining
- * backwards compatibility with older structs. If adding a new field,
- * please make sure to add a flag for that new field */
-#define KVM_SREGS_S_HIOR		(1 << 0)
-
 /*
  * In KVM_SET_SREGS, reserved/pad fields must be left untouched from a
  * previous KVM_GET_REGS.
@@ -179,8 +173,6 @@ struct kvm_sregs {
 				__u64 ibat[8]; 
 				__u64 dbat[8]; 
 			} ppc32;
-			__u64 flags; /* KVM_SREGS_S_ */
-			__u64 hior;
 		} s;
 		struct {
 			union {

arch/powerpc/include/asm/kvm_book3s.h

@@ -90,8 +90,6 @@ struct kvmppc_vcpu_book3s {
 #endif
 	int context_id[SID_CONTEXTS];
 
-	bool hior_sregs;		/* HIOR is set by SREGS, not PVR */
-
 	struct hlist_head hpte_hash_pte[HPTEG_HASH_NUM_PTE];
 	struct hlist_head hpte_hash_pte_long[HPTEG_HASH_NUM_PTE_LONG];
 	struct hlist_head hpte_hash_vpte[HPTEG_HASH_NUM_VPTE];

arch/powerpc/include/asm/reg_booke.h

@@ -31,7 +31,7 @@
 
 #define MSR_		MSR_ME | MSR_CE
 #define MSR_KERNEL	MSR_ | MSR_64BIT
-#define MSR_USER32	MSR_ | MSR_PR | MSR_EE | MSR_DE
+#define MSR_USER32	MSR_ | MSR_PR | MSR_EE
 #define MSR_USER64	MSR_USER32 | MSR_64BIT
 #elif defined (CONFIG_40x)
 #define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)

arch/powerpc/include/asm/sections.h

@@ -8,7 +8,7 @@
 
 #ifdef __powerpc64__
 
-extern char _end[];
+extern char __end_interrupts[];
 
 static inline int in_kernel_text(unsigned long addr)
 {

arch/powerpc/include/asm/synch.h

@@ -13,6 +13,7 @@
 extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup;
 extern void do_lwsync_fixups(unsigned long value, void *fixup_start,
 			     void *fixup_end);
+extern void do_final_fixups(void);
 
 static inline void eieio(void)
 {
@@ -43,9 +44,13 @@ static inline void isync(void)
 	MAKE_LWSYNC_SECTION_ENTRY(97, __lwsync_fixup);
 #define PPC_ACQUIRE_BARRIER	 "\n" stringify_in_c(__PPC_ACQUIRE_BARRIER)
 #define PPC_RELEASE_BARRIER	 stringify_in_c(LWSYNC) "\n"
+#define PPC_ATOMIC_ENTRY_BARRIER "\n" stringify_in_c(LWSYNC) "\n"
+#define PPC_ATOMIC_EXIT_BARRIER	 "\n" stringify_in_c(sync) "\n"
 #else
 #define PPC_ACQUIRE_BARRIER
 #define PPC_RELEASE_BARRIER
+#define PPC_ATOMIC_ENTRY_BARRIER
+#define PPC_ATOMIC_EXIT_BARRIER
 #endif
 
 #endif /* __KERNEL__ */

arch/powerpc/kernel/entry_32.S

@@ -215,7 +215,22 @@ reenable_mmu:				/* re-enable mmu so we can */
 	stw	r9,8(r1)
 	stw	r11,12(r1)
 	stw	r3,ORIG_GPR3(r1)
+	/*
+	 * The trace_hardirqs_off will use CALLER_ADDR0 and CALLER_ADDR1.
+	 * If from user mode there is only one stack frame on the stack, and
+	 * accessing CALLER_ADDR1 will cause oops. So we need create a dummy
+	 * stack frame to make trace_hardirqs_off happy.
+	 */
+	andi.	r12,r12,MSR_PR
+	beq	11f
+	stwu	r1,-16(r1)
 	bl	trace_hardirqs_off
+	addi	r1,r1,16
+	b	12f
+
+11:
+	bl	trace_hardirqs_off
+12:
 	lwz	r0,GPR0(r1)
 	lwz	r3,ORIG_GPR3(r1)
 	lwz	r4,GPR4(r1)

arch/powerpc/kernel/jump_label.c

@@ -11,6 +11,7 @@
 #include <linux/jump_label.h>
 #include <asm/code-patching.h>
 
+#ifdef HAVE_JUMP_LABEL
 void arch_jump_label_transform(struct jump_entry *entry,
 			       enum jump_label_type type)
 {
@@ -21,3 +22,4 @@ void arch_jump_label_transform(struct jump_entry *entry,
 	else
 		patch_instruction(addr, PPC_INST_NOP);
 }
+#endif

arch/powerpc/kernel/kvm.c

@@ -132,7 +132,6 @@ static void kvm_patch_ins_b(u32 *inst, int addr)
 	/* On relocatable kernels interrupts handlers and our code
 	   can be in different regions, so we don't patch them */
 
-	extern u32 __end_interrupts;
 	if ((ulong)inst < (ulong)&__end_interrupts)
 		return;
 #endif

arch/powerpc/kernel/misc_32.S

@@ -738,7 +738,7 @@ relocate_new_kernel:
 	mr      r5, r31
 
 	li	r0, 0
-#elif defined(CONFIG_44x)  && !defined(CONFIG_47x)
+#elif defined(CONFIG_44x)  && !defined(CONFIG_PPC_47x)
 
 /*
  * Code for setting up 1:1 mapping for PPC440x for KEXEC

arch/powerpc/kernel/process.c

@@ -486,28 +486,6 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	new_thread = &new->thread;
 	old_thread = &current->thread;
 
-#if defined(CONFIG_PPC_BOOK3E_64)
-	/* XXX Current Book3E code doesn't deal with kernel side DBCR0,
-	 * we always hold the user values, so we set it now.
-	 *
-	 * However, we ensure the kernel MSR:DE is appropriately cleared too
-	 * to avoid spurrious single step exceptions in the kernel.
-	 *
-	 * This will have to change to merge with the ppc32 code at some point,
-	 * but I don't like much what ppc32 is doing today so there's some
-	 * thinking needed there
-	 */
-	if ((new_thread->dbcr0 | old_thread->dbcr0) & DBCR0_IDM) {
-		u32 dbcr0;
-
-		mtmsr(mfmsr() & ~MSR_DE);
-		isync();
-		dbcr0 = mfspr(SPRN_DBCR0);
-		dbcr0 = (dbcr0 & DBCR0_EDM) | new_thread->dbcr0;
-		mtspr(SPRN_DBCR0, dbcr0);
-	}
-#endif /* CONFIG_PPC64_BOOK3E */
-
 #ifdef CONFIG_PPC64
 	/*
 	 * Collect processor utilization data per process
@@ -657,7 +635,7 @@ void show_regs(struct pt_regs * regs)
 	if ((regs->trap != 0xc00) && cpu_has_feature(CPU_FTR_CFAR))
 		printk("CFAR: "REG"\n", regs->orig_gpr3);
 	if (trap == 0x300 || trap == 0x600)
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
 		printk("DEAR: "REG", ESR: "REG"\n", regs->dar, regs->dsisr);
 #else
 		printk("DAR: "REG", DSISR: %08lx\n", regs->dar, regs->dsisr);

arch/powerpc/kernel/prom_init.c

@@ -1579,10 +1579,8 @@ static void __init prom_instantiate_rtas(void)
 		return;
 
 	base = alloc_down(size, PAGE_SIZE, 0);
-	if (base == 0) {
+	if (base == 0)
-		prom_printf("RTAS allocation failed !\n");
+		prom_panic("Could not allocate memory for RTAS\n");
-		return;
-	}
 
 	rtas_inst = call_prom("open", 1, 1, ADDR("/rtas"));
 	if (!IHANDLE_VALID(rtas_inst)) {

arch/powerpc/kernel/setup_32.c

@@ -107,6 +107,8 @@ notrace unsigned long __init early_init(unsigned long dt_ptr)
 			 PTRRELOC(&__start___lwsync_fixup),
 			 PTRRELOC(&__stop___lwsync_fixup));
 
+	do_final_fixups();
+
 	return KERNELBASE + offset;
 }
 

arch/powerpc/kernel/setup_64.c

@@ -359,6 +359,7 @@ void __init setup_system(void)
 			  &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);
 	do_lwsync_fixups(cur_cpu_spec->cpu_features,
 			 &__start___lwsync_fixup, &__stop___lwsync_fixup);
+	do_final_fixups();
 
 	/*
 	 * Unflatten the device-tree passed by prom_init or kexec

arch/powerpc/kernel/signal_32.c

@@ -97,7 +97,7 @@ static inline int put_sigset_t(compat_sigset_t __user *uset, sigset_t *set)
 	compat_sigset_t	cset;
 
 	switch (_NSIG_WORDS) {
-	case 4: cset.sig[5] = set->sig[3] & 0xffffffffull;
+	case 4: cset.sig[6] = set->sig[3] & 0xffffffffull;
 		cset.sig[7] = set->sig[3] >> 32;
 	case 3: cset.sig[4] = set->sig[2] & 0xffffffffull;
 		cset.sig[5] = set->sig[2] >> 32;

arch/powerpc/kernel/traps.c

@@ -1298,14 +1298,12 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
 
 		if (user_mode(regs)) {
 			current->thread.dbcr0 &= ~DBCR0_IC;
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 			if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0,
 					       current->thread.dbcr1))
 				regs->msr |= MSR_DE;
 			else
 				/* Make sure the IDM bit is off */
 				current->thread.dbcr0 &= ~DBCR0_IDM;
-#endif
 		}
 
 		_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);

arch/powerpc/kvm/book3s_hv.c

@@ -44,6 +44,7 @@
 #include <asm/processor.h>
 #include <asm/cputhreads.h>
 #include <asm/page.h>
+#include <asm/hvcall.h>
 #include <linux/gfp.h>
 #include <linux/sched.h>
 #include <linux/vmalloc.h>

arch/powerpc/kvm/book3s_pr.c

@@ -151,7 +151,6 @@ void kvmppc_set_pvr(struct kvm_vcpu *vcpu, u32 pvr)
 #ifdef CONFIG_PPC_BOOK3S_64
 	if ((pvr >= 0x330000) && (pvr < 0x70330000)) {
 		kvmppc_mmu_book3s_64_init(vcpu);
-		if (!to_book3s(vcpu)->hior_sregs)
 		to_book3s(vcpu)->hior = 0xfff00000;
 		to_book3s(vcpu)->msr_mask = 0xffffffffffffffffULL;
 		vcpu->arch.cpu_type = KVM_CPU_3S_64;
@@ -159,7 +158,6 @@ void kvmppc_set_pvr(struct kvm_vcpu *vcpu, u32 pvr)
 #endif
 	{
 		kvmppc_mmu_book3s_32_init(vcpu);
-		if (!to_book3s(vcpu)->hior_sregs)
 		to_book3s(vcpu)->hior = 0;
 		to_book3s(vcpu)->msr_mask = 0xffffffffULL;
 		vcpu->arch.cpu_type = KVM_CPU_3S_32;
@@ -797,9 +795,6 @@ int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
 		}
 	}
 
-	if (sregs->u.s.flags & KVM_SREGS_S_HIOR)
-		sregs->u.s.hior = to_book3s(vcpu)->hior;
-
 	return 0;
 }
 
@@ -836,11 +831,6 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 	/* Flush the MMU after messing with the segments */
 	kvmppc_mmu_pte_flush(vcpu, 0, 0);
 
-	if (sregs->u.s.flags & KVM_SREGS_S_HIOR) {
-		to_book3s(vcpu)->hior_sregs = true;
-		to_book3s(vcpu)->hior = sregs->u.s.hior;
-	}
-
 	return 0;
 }
 

arch/powerpc/kvm/powerpc.c

@@ -208,7 +208,6 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_PPC_BOOKE_SREGS:
 #else
 	case KVM_CAP_PPC_SEGSTATE:
-	case KVM_CAP_PPC_HIOR:
 	case KVM_CAP_PPC_PAPR:
 #endif
 	case KVM_CAP_PPC_UNSET_IRQ:

arch/powerpc/lib/feature-fixups.c

@@ -18,6 +18,8 @@
 #include <linux/init.h>
 #include <asm/cputable.h>
 #include <asm/code-patching.h>
+#include <asm/page.h>
+#include <asm/sections.h>
 
 
 struct fixup_entry {
@@ -128,6 +130,27 @@ void do_lwsync_fixups(unsigned long value, void *fixup_start, void *fixup_end)
 	}
 }
 
+void do_final_fixups(void)
+{
+#if defined(CONFIG_PPC64) && defined(CONFIG_RELOCATABLE)
+	int *src, *dest;
+	unsigned long length;
+
+	if (PHYSICAL_START == 0)
+		return;
+
+	src = (int *)(KERNELBASE + PHYSICAL_START);
+	dest = (int *)KERNELBASE;
+	length = (__end_interrupts - _stext) / sizeof(int);
+
+	while (length--) {
+		patch_instruction(dest, *src);
+		src++;
+		dest++;
+	}
+#endif
+}
+
 #ifdef CONFIG_FTR_FIXUP_SELFTEST
 
 #define check(x)	\

arch/powerpc/mm/hugetlbpage.c

@@ -15,6 +15,7 @@
 #include <linux/of_fdt.h>
 #include <linux/memblock.h>
 #include <linux/bootmem.h>
+#include <linux/moduleparam.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/tlb.h>

arch/powerpc/platforms/85xx/Kconfig

@@ -203,7 +203,7 @@ config P3060_QDS
 	select PPC_E500MC
 	select PHYS_64BIT
 	select SWIOTLB
-	select MPC8xxx_GPIO
+	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
 	help

arch/powerpc/platforms/85xx/p3060_qds.c

@@ -70,7 +70,7 @@ define_machine(p3060_qds) {
 	.power_save		= e500_idle,
 };
 
-machine_device_initcall(p3060_qds, declare_of_platform_devices);
+machine_device_initcall(p3060_qds, corenet_ds_publish_devices);
 
 #ifdef CONFIG_SWIOTLB
 machine_arch_initcall(p3060_qds, swiotlb_setup_bus_notifier);

arch/powerpc/platforms/Kconfig

@@ -347,7 +347,7 @@ config SIMPLE_GPIO
 
 config MCU_MPC8349EMITX
 	bool "MPC8349E-mITX MCU driver"
-	depends on I2C && PPC_83xx
+	depends on I2C=y && PPC_83xx
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help

arch/powerpc/platforms/ps3/interrupt.c

@@ -88,6 +88,7 @@ struct ps3_private {
 	struct ps3_bmp bmp __attribute__ ((aligned (PS3_BMP_MINALIGN)));
 	u64 ppe_id;
 	u64 thread_id;
+	unsigned long ipi_mask;
 };
 
 static DEFINE_PER_CPU(struct ps3_private, ps3_private);
@@ -144,6 +145,10 @@ static void ps3_chip_unmask(struct irq_data *d)
 static void ps3_chip_eoi(struct irq_data *d)
 {
 	const struct ps3_private *pd = irq_data_get_irq_chip_data(d);
+
+	/* non-IPIs are EOIed here. */
+
+	if (!test_bit(63 - d->irq, &pd->ipi_mask))
 		lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, d->irq);
 }
 
@@ -691,6 +696,16 @@ void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq)
 		cpu, virq, pd->bmp.ipi_debug_brk_mask);
 }
 
+void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq)
+{
+	struct ps3_private *pd = &per_cpu(ps3_private, cpu);
+
+	set_bit(63 - virq, &pd->ipi_mask);
+
+	DBG("%s:%d: cpu %u, virq %u, ipi_mask %lxh\n", __func__, __LINE__,
+		cpu, virq, pd->ipi_mask);
+}
+
 static unsigned int ps3_get_irq(void)
 {
 	struct ps3_private *pd = &__get_cpu_var(ps3_private);
@@ -720,6 +735,12 @@ static unsigned int ps3_get_irq(void)
 		BUG();
 	}
 #endif
+
+	/* IPIs are EOIed here. */
+
+	if (test_bit(63 - plug, &pd->ipi_mask))
+		lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, plug);
+
 	return plug;
 }
 

arch/powerpc/platforms/ps3/platform.h

@@ -43,6 +43,7 @@ void ps3_mm_shutdown(void);
 void ps3_init_IRQ(void);
 void ps3_shutdown_IRQ(int cpu);
 void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq);
+void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq);
 
 /* smp */
 

arch/powerpc/platforms/ps3/smp.c

@@ -59,11 +59,9 @@ static void ps3_smp_message_pass(int cpu, int msg)
 
 static int ps3_smp_probe(void)
 {
-	return 2;
+	int cpu;
-}
 
-static void __init ps3_smp_setup_cpu(int cpu)
+	for (cpu = 0; cpu < 2; cpu++) {
-{
 		int result;
 		unsigned int *virqs = per_cpu(ps3_ipi_virqs, cpu);
 		int i;
@@ -94,11 +92,16 @@ static void __init ps3_smp_setup_cpu(int cpu)
 
 			if (result)
 				virqs[i] = NO_IRQ;
+			else
+				ps3_register_ipi_irq(cpu, virqs[i]);
 		}
 
 		ps3_register_ipi_debug_brk(cpu, virqs[PPC_MSG_DEBUGGER_BREAK]);
 
 		DBG(" <- %s:%d: (%d)\n", __func__, __LINE__, cpu);
+	}
+
+	return 2;
 }
 
 void ps3_smp_cleanup_cpu(int cpu)
@@ -121,7 +124,6 @@ static struct smp_ops_t ps3_smp_ops = {
 	.probe		= ps3_smp_probe,
 	.message_pass	= ps3_smp_message_pass,
 	.kick_cpu	= smp_generic_kick_cpu,
-	.setup_cpu	= ps3_smp_setup_cpu,
 };
 
 void smp_init_ps3(void)

arch/powerpc/sysdev/ehv_pic.c

@@ -280,6 +280,7 @@ void __init ehv_pic_init(void)
 
 	if (!ehv_pic->irqhost) {
 		of_node_put(np);
+		kfree(ehv_pic);
 		return;
 	}
 

arch/powerpc/sysdev/fsl_lbc.c

@@ -328,6 +328,7 @@ static int __devinit fsl_lbc_ctrl_probe(struct platform_device *dev)
 err:
 	iounmap(fsl_lbc_ctrl_dev->regs);
 	kfree(fsl_lbc_ctrl_dev);
+	fsl_lbc_ctrl_dev = NULL;
 	return ret;
 }
 

arch/powerpc/sysdev/qe_lib/qe.c

@@ -216,7 +216,7 @@ int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier)
 	/* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says
 	   that the BRG divisor must be even if you're not using divide-by-16
 	   mode. */
-	if (!div16 && (divisor & 1))
+	if (!div16 && (divisor & 1) && (divisor > 3))
 		divisor++;
 
 	tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) |

arch/s390/include/asm/kvm_host.h

@@ -47,7 +47,7 @@ struct sca_block {
 #define KVM_HPAGE_MASK(x)	(~(KVM_HPAGE_SIZE(x) - 1))
 #define KVM_PAGES_PER_HPAGE(x)	(KVM_HPAGE_SIZE(x) / PAGE_SIZE)
 
-#define CPUSTAT_HOST       0x80000000
+#define CPUSTAT_STOPPED    0x80000000
 #define CPUSTAT_WAIT       0x10000000
 #define CPUSTAT_ECALL_PEND 0x08000000
 #define CPUSTAT_STOP_INT   0x04000000
@@ -139,6 +139,7 @@ struct kvm_vcpu_stat {
 	u32 instruction_stfl;
 	u32 instruction_tprot;
 	u32 instruction_sigp_sense;
+	u32 instruction_sigp_sense_running;
 	u32 instruction_sigp_external_call;
 	u32 instruction_sigp_emergency;
 	u32 instruction_sigp_stop;

arch/s390/kvm/diag.c

@@ -70,7 +70,7 @@ static int __diag_ipl_functions(struct kvm_vcpu *vcpu)
 		return -EOPNOTSUPP;
 	}
 
-	atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
+	atomic_set_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags);
 	vcpu->run->s390_reset_flags |= KVM_S390_RESET_SUBSYSTEM;
 	vcpu->run->s390_reset_flags |= KVM_S390_RESET_IPL;
 	vcpu->run->s390_reset_flags |= KVM_S390_RESET_CPU_INIT;

arch/s390/kvm/intercept.c

@@ -132,7 +132,6 @@ static int handle_stop(struct kvm_vcpu *vcpu)
 	int rc = 0;
 
 	vcpu->stat.exit_stop_request++;
-	atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
 	spin_lock_bh(&vcpu->arch.local_int.lock);
 	if (vcpu->arch.local_int.action_bits & ACTION_STORE_ON_STOP) {
 		vcpu->arch.local_int.action_bits &= ~ACTION_STORE_ON_STOP;
@@ -149,6 +148,8 @@ static int handle_stop(struct kvm_vcpu *vcpu)
 	}
 
 	if (vcpu->arch.local_int.action_bits & ACTION_STOP_ON_STOP) {
+		atomic_set_mask(CPUSTAT_STOPPED,
+				&vcpu->arch.sie_block->cpuflags);
 		vcpu->arch.local_int.action_bits &= ~ACTION_STOP_ON_STOP;
 		VCPU_EVENT(vcpu, 3, "%s", "cpu stopped");
 		rc = -EOPNOTSUPP;

arch/s390/kvm/interrupt.c

@@ -252,6 +252,7 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu,
 			offsetof(struct _lowcore, restart_psw), sizeof(psw_t));
 		if (rc == -EFAULT)
 			exception = 1;
+		atomic_clear_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags);
 		break;
 
 	case KVM_S390_PROGRAM_INT:

arch/s390/kvm/kvm-s390.c

@@ -65,6 +65,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "instruction_stfl", VCPU_STAT(instruction_stfl) },
 	{ "instruction_tprot", VCPU_STAT(instruction_tprot) },
 	{ "instruction_sigp_sense", VCPU_STAT(instruction_sigp_sense) },
+	{ "instruction_sigp_sense_running", VCPU_STAT(instruction_sigp_sense_running) },
 	{ "instruction_sigp_external_call", VCPU_STAT(instruction_sigp_external_call) },
 	{ "instruction_sigp_emergency", VCPU_STAT(instruction_sigp_emergency) },
 	{ "instruction_sigp_stop", VCPU_STAT(instruction_sigp_stop) },
@@ -127,6 +128,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	switch (ext) {
 	case KVM_CAP_S390_PSW:
 	case KVM_CAP_S390_GMAP:
+	case KVM_CAP_SYNC_MMU:
 		r = 1;
 		break;
 	default:
@@ -270,10 +272,12 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	restore_fp_regs(&vcpu->arch.guest_fpregs);
 	restore_access_regs(vcpu->arch.guest_acrs);
 	gmap_enable(vcpu->arch.gmap);
+	atomic_set_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
 }
 
 void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 {
+	atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
 	gmap_disable(vcpu->arch.gmap);
 	save_fp_regs(&vcpu->arch.guest_fpregs);
 	save_access_regs(vcpu->arch.guest_acrs);
@@ -301,7 +305,9 @@ static void kvm_s390_vcpu_initial_reset(struct kvm_vcpu *vcpu)
 
 int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 {
-	atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH | CPUSTAT_SM);
+	atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH |
+						    CPUSTAT_SM |
+						    CPUSTAT_STOPPED);
 	vcpu->arch.sie_block->ecb   = 6;
 	vcpu->arch.sie_block->eca   = 0xC1002001U;
 	vcpu->arch.sie_block->fac   = (int) (long) facilities;
@@ -428,7 +434,7 @@ static int kvm_arch_vcpu_ioctl_set_initial_psw(struct kvm_vcpu *vcpu, psw_t psw)
 {
 	int rc = 0;
 
-	if (atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_RUNNING)
+	if (!(atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_STOPPED))
 		rc = -EBUSY;
 	else {
 		vcpu->run->psw_mask = psw.mask;
@@ -501,7 +507,7 @@ rerun_vcpu:
 	if (vcpu->sigset_active)
 		sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
 
-	atomic_set_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
+	atomic_clear_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags);
 
 	BUG_ON(vcpu->kvm->arch.float_int.local_int[vcpu->vcpu_id] == NULL);
 

arch/s390/kvm/priv.c

@@ -336,6 +336,7 @@ static int handle_tprot(struct kvm_vcpu *vcpu)
 	u64 address1 = disp1 + base1 ? vcpu->arch.guest_gprs[base1] : 0;
 	u64 address2 = disp2 + base2 ? vcpu->arch.guest_gprs[base2] : 0;
 	struct vm_area_struct *vma;
+	unsigned long user_address;
 
 	vcpu->stat.instruction_tprot++;
 
@@ -349,9 +350,14 @@ static int handle_tprot(struct kvm_vcpu *vcpu)
 		return -EOPNOTSUPP;
 
 
+	/* we must resolve the address without holding the mmap semaphore.
+	 * This is ok since the userspace hypervisor is not supposed to change
+	 * the mapping while the guest queries the memory. Otherwise the guest
+	 * might crash or get wrong info anyway. */
+	user_address = (unsigned long) __guestaddr_to_user(vcpu, address1);
+
 	down_read(&current->mm->mmap_sem);
-	vma = find_vma(current->mm,
+	vma = find_vma(current->mm, user_address);
-			(unsigned long) __guestaddr_to_user(vcpu, address1));
 	if (!vma) {
 		up_read(&current->mm->mmap_sem);
 		return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);

arch/s390/kvm/sigp.c

@@ -31,9 +31,11 @@
 #define SIGP_SET_PREFIX        0x0d
 #define SIGP_STORE_STATUS_ADDR 0x0e
 #define SIGP_SET_ARCH          0x12
+#define SIGP_SENSE_RUNNING     0x15
 
 /* cpu status bits */
 #define SIGP_STAT_EQUIPMENT_CHECK   0x80000000UL
+#define SIGP_STAT_NOT_RUNNING	    0x00000400UL
 #define SIGP_STAT_INCORRECT_STATE   0x00000200UL
 #define SIGP_STAT_INVALID_PARAMETER 0x00000100UL
 #define SIGP_STAT_EXT_CALL_PENDING  0x00000080UL
@@ -57,8 +59,8 @@ static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr,
 	spin_lock(&fi->lock);
 	if (fi->local_int[cpu_addr] == NULL)
 		rc = 3; /* not operational */
-	else if (atomic_read(fi->local_int[cpu_addr]->cpuflags)
+	else if (!(atomic_read(fi->local_int[cpu_addr]->cpuflags)
-		 & CPUSTAT_RUNNING) {
+		  & CPUSTAT_STOPPED)) {
 		*reg &= 0xffffffff00000000UL;
 		rc = 1; /* status stored */
 	} else {
@@ -251,7 +253,7 @@ static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address,
 
 	spin_lock_bh(&li->lock);
 	/* cpu must be in stopped state */
-	if (atomic_read(li->cpuflags) & CPUSTAT_RUNNING) {
+	if (!(atomic_read(li->cpuflags) & CPUSTAT_STOPPED)) {
 		rc = 1; /* incorrect state */
 		*reg &= SIGP_STAT_INCORRECT_STATE;
 		kfree(inti);
@@ -275,6 +277,38 @@ out_fi:
 	return rc;
 }
 
+static int __sigp_sense_running(struct kvm_vcpu *vcpu, u16 cpu_addr,
+				unsigned long *reg)
+{
+	int rc;
+	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
+
+	if (cpu_addr >= KVM_MAX_VCPUS)
+		return 3; /* not operational */
+
+	spin_lock(&fi->lock);
+	if (fi->local_int[cpu_addr] == NULL)
+		rc = 3; /* not operational */
+	else {
+		if (atomic_read(fi->local_int[cpu_addr]->cpuflags)
+		    & CPUSTAT_RUNNING) {
+			/* running */
+			rc = 1;
+		} else {
+			/* not running */
+			*reg &= 0xffffffff00000000UL;
+			*reg |= SIGP_STAT_NOT_RUNNING;
+			rc = 0;
+		}
+	}
+	spin_unlock(&fi->lock);
+
+	VCPU_EVENT(vcpu, 4, "sensed running status of cpu %x rc %x", cpu_addr,
+		   rc);
+
+	return rc;
+}
+
 int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu)
 {
 	int r1 = (vcpu->arch.sie_block->ipa & 0x00f0) >> 4;
@@ -331,6 +365,11 @@ int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu)
 		rc = __sigp_set_prefix(vcpu, cpu_addr, parameter,
 				       &vcpu->arch.guest_gprs[r1]);
 		break;
+	case SIGP_SENSE_RUNNING:
+		vcpu->stat.instruction_sigp_sense_running++;
+		rc = __sigp_sense_running(vcpu, cpu_addr,
+					  &vcpu->arch.guest_gprs[r1]);
+		break;
 	case SIGP_RESTART:
 		vcpu->stat.instruction_sigp_restart++;
 		/* user space must know about restart */

arch/sh/include/cpu-sh4/cpu/sh7724.h

@@ -314,5 +314,6 @@ enum {
 
 extern struct clk sh7724_fsimcka_clk;
 extern struct clk sh7724_fsimckb_clk;
+extern struct clk sh7724_dv_clki;
 
 #endif /* __ASM_SH7724_H__ */

arch/sh/kernel/cpu/sh4a/clock-sh7723.c

@@ -233,73 +233,10 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("sh0", &mstp_clks[HWBLK_SHYWAY]),
 	CLKDEV_CON_ID("hudi0", &mstp_clks[HWBLK_HUDI]),
 	CLKDEV_CON_ID("ubc0", &mstp_clks[HWBLK_UBC]),
-	{
-		/* TMU0 */
-		.dev_id		= "sh_tmu.0",
-		.con_id		= "tmu_fck",
-		.clk		= &mstp_clks[HWBLK_TMU0],
-	}, {
-		/* TMU1 */
-		.dev_id		= "sh_tmu.1",
-		.con_id		= "tmu_fck",
-		.clk		= &mstp_clks[HWBLK_TMU0],
-	}, {
-		/* TMU2 */
-		.dev_id		= "sh_tmu.2",
-		.con_id		= "tmu_fck",
-		.clk		= &mstp_clks[HWBLK_TMU0],
-	},
 	CLKDEV_CON_ID("cmt_fck", &mstp_clks[HWBLK_CMT]),
 	CLKDEV_CON_ID("rwdt0", &mstp_clks[HWBLK_RWDT]),
 	CLKDEV_CON_ID("dmac1", &mstp_clks[HWBLK_DMAC1]),
-	{
-		/* TMU3 */
-		.dev_id		= "sh_tmu.3",
-		.con_id		= "tmu_fck",
-		.clk		= &mstp_clks[HWBLK_TMU1],
-	}, {
-		/* TMU4 */
-		.dev_id		= "sh_tmu.4",
-		.con_id		= "tmu_fck",
-		.clk		= &mstp_clks[HWBLK_TMU1],
-	}, {
-		/* TMU5 */
-		.dev_id		= "sh_tmu.5",
-		.con_id		= "tmu_fck",
-		.clk		= &mstp_clks[HWBLK_TMU1],
-	},
 	CLKDEV_CON_ID("flctl0", &mstp_clks[HWBLK_FLCTL]),
-	{
-		/* SCIF0 */
-		.dev_id		= "sh-sci.0",
-		.con_id		= "sci_fck",
-		.clk		= &mstp_clks[HWBLK_SCIF0],
-	}, {
-		/* SCIF1 */
-		.dev_id		= "sh-sci.1",
-		.con_id		= "sci_fck",
-		.clk		= &mstp_clks[HWBLK_SCIF1],
-	}, {
-		/* SCIF2 */
-		.dev_id		= "sh-sci.2",
-		.con_id		= "sci_fck",
-		.clk		= &mstp_clks[HWBLK_SCIF2],
-	}, {
-		/* SCIF3 */
-		.dev_id		= "sh-sci.3",
-		.con_id		= "sci_fck",
-		.clk		= &mstp_clks[HWBLK_SCIF3],
-	}, {
-		/* SCIF4 */
-		.dev_id		= "sh-sci.4",
-		.con_id		= "sci_fck",
-		.clk		= &mstp_clks[HWBLK_SCIF4],
-	}, {
-		/* SCIF5 */
-		.dev_id		= "sh-sci.5",
-		.con_id		= "sci_fck",
-		.clk		= &mstp_clks[HWBLK_SCIF5],
-	},
 	CLKDEV_CON_ID("msiof0", &mstp_clks[HWBLK_MSIOF0]),
 	CLKDEV_CON_ID("msiof1", &mstp_clks[HWBLK_MSIOF1]),
 	CLKDEV_CON_ID("meram0", &mstp_clks[HWBLK_MERAM]),
@@ -324,6 +261,19 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("veu0", &mstp_clks[HWBLK_VEU2H0]),
 	CLKDEV_CON_ID("vpu0", &mstp_clks[HWBLK_VPU]),
 	CLKDEV_CON_ID("lcdc0", &mstp_clks[HWBLK_LCDC]),
+
+	CLKDEV_ICK_ID("tmu_fck", "sh_tmu.0", &mstp_clks[HWBLK_TMU0]),
+	CLKDEV_ICK_ID("tmu_fck", "sh_tmu.1", &mstp_clks[HWBLK_TMU0]),
+	CLKDEV_ICK_ID("tmu_fck", "sh_tmu.2", &mstp_clks[HWBLK_TMU0]),
+	CLKDEV_ICK_ID("tmu_fck", "sh_tmu.3", &mstp_clks[HWBLK_TMU1]),
+	CLKDEV_ICK_ID("tmu_fck", "sh_tmu.4", &mstp_clks[HWBLK_TMU1]),
+	CLKDEV_ICK_ID("tmu_fck", "sh_tmu.5", &mstp_clks[HWBLK_TMU1]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[HWBLK_SCIF0]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[HWBLK_SCIF1]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[HWBLK_SCIF2]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[HWBLK_SCIF3]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.4", &mstp_clks[HWBLK_SCIF4]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[HWBLK_SCIF5]),
 };
 
 int __init arch_clk_init(void)

arch/sh/kernel/cpu/sh4a/clock-sh7724.c

@@ -111,13 +111,16 @@ static struct clk div3_clk = {
 	.parent		= &pll_clk,
 };
 
-/* External input clock (pin name: FSIMCKA/FSIMCKB ) */
+/* External input clock (pin name: FSIMCKA/FSIMCKB/DV_CLKI ) */
 struct clk sh7724_fsimcka_clk = {
 };
 
 struct clk sh7724_fsimckb_clk = {
 };
 
+struct clk sh7724_dv_clki = {
+};
+
 static struct clk *main_clks[] = {
 	&r_clk,
 	&extal_clk,
@@ -126,6 +129,7 @@ static struct clk *main_clks[] = {
 	&div3_clk,
 	&sh7724_fsimcka_clk,
 	&sh7724_fsimckb_clk,
+	&sh7724_dv_clki,
 };
 
 static void div4_kick(struct clk *clk)
@@ -163,17 +167,20 @@ struct clk div4_clks[DIV4_NR] = {
 	[DIV4_M1] = DIV4(FRQCRB, 4, 0x2f7c, CLK_ENABLE_ON_INIT),
 };
 
-enum { DIV6_V, DIV6_I, DIV6_S, DIV6_NR };
+enum { DIV6_V, DIV6_I, DIV6_S, DIV6_FA, DIV6_FB, DIV6_NR };
-
-static struct clk div6_clks[DIV6_NR] = {
-	[DIV6_V] = SH_CLK_DIV6(&div3_clk, VCLKCR, 0),
-	[DIV6_I] = SH_CLK_DIV6(&div3_clk, IRDACLKCR, 0),
-	[DIV6_S] = SH_CLK_DIV6(&div3_clk, SPUCLKCR, CLK_ENABLE_ON_INIT),
-};
-
-enum { DIV6_FA, DIV6_FB, DIV6_REPARENT_NR };
 
 /* Indices are important - they are the actual src selecting values */
+static struct clk *common_parent[] = {
+	[0] = &div3_clk,
+	[1] = NULL,
+};
+
+static struct clk *vclkcr_parent[8] = {
+	[0] = &div3_clk,
+	[2] = &sh7724_dv_clki,
+	[4] = &extal_clk,
+};
+
 static struct clk *fclkacr_parent[] = {
 	[0] = &div3_clk,
 	[1] = NULL,
@@ -188,10 +195,16 @@ static struct clk *fclkbcr_parent[] = {
 	[3] = NULL,
 };
 
-static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
+static struct clk div6_clks[DIV6_NR] = {
-	[DIV6_FA] = SH_CLK_DIV6_EXT(&div3_clk, FCLKACR, 0,
+	[DIV6_V] = SH_CLK_DIV6_EXT(VCLKCR, 0,
+			vclkcr_parent, ARRAY_SIZE(vclkcr_parent), 12, 3),
+	[DIV6_I] = SH_CLK_DIV6_EXT(IRDACLKCR, 0,
+			common_parent, ARRAY_SIZE(common_parent), 6, 1),
+	[DIV6_S] = SH_CLK_DIV6_EXT(SPUCLKCR, CLK_ENABLE_ON_INIT,
+			common_parent, ARRAY_SIZE(common_parent), 6, 1),
+	[DIV6_FA] = SH_CLK_DIV6_EXT(FCLKACR, 0,
 				      fclkacr_parent, ARRAY_SIZE(fclkacr_parent), 6, 2),
-	[DIV6_FB] = SH_CLK_DIV6_EXT(&div3_clk, FCLKBCR, 0,
+	[DIV6_FB] = SH_CLK_DIV6_EXT(FCLKBCR, 0,
 				      fclkbcr_parent, ARRAY_SIZE(fclkbcr_parent), 6, 2),
 };
 
@@ -269,8 +282,8 @@ static struct clk_lookup lookups[] = {
 
 	/* DIV6 clocks */
 	CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
-	CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FA]),
+	CLKDEV_CON_ID("fsia_clk", &div6_clks[DIV6_FA]),
-	CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FB]),
+	CLKDEV_CON_ID("fsib_clk", &div6_clks[DIV6_FB]),
 	CLKDEV_CON_ID("irda_clk", &div6_clks[DIV6_I]),
 	CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_S]),
 
@@ -356,10 +369,7 @@ int __init arch_clk_init(void)
 		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
 
 	if (!ret)
-		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+		ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR);
-
-	if (!ret)
-		ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_REPARENT_NR);
 
 	if (!ret)
 		ret = sh_hwblk_clk_register(mstp_clks, HWBLK_NR);

arch/sparc/include/asm/pgtable_32.h

@@ -431,10 +431,6 @@ extern unsigned long *sparc_valid_addr_bitmap;
 #define kern_addr_valid(addr) \
 	(test_bit(__pa((unsigned long)(addr))>>20, sparc_valid_addr_bitmap))
 
-extern int io_remap_pfn_range(struct vm_area_struct *vma,
-			      unsigned long from, unsigned long pfn,
-			      unsigned long size, pgprot_t prot);
-
 /*
  * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
  * its high 4 bits.  These macros/functions put it there or get it from there.
@@ -443,6 +439,22 @@ extern int io_remap_pfn_range(struct vm_area_struct *vma,
 #define GET_IOSPACE(pfn)		(pfn >> (BITS_PER_LONG - 4))
 #define GET_PFN(pfn)			(pfn & 0x0fffffffUL)
 
+extern int remap_pfn_range(struct vm_area_struct *, unsigned long, unsigned long,
+			   unsigned long, pgprot_t);
+
+static inline int io_remap_pfn_range(struct vm_area_struct *vma,
+				     unsigned long from, unsigned long pfn,
+				     unsigned long size, pgprot_t prot)
+{
+	unsigned long long offset, space, phys_base;
+
+	offset = ((unsigned long long) GET_PFN(pfn)) << PAGE_SHIFT;
+	space = GET_IOSPACE(pfn);
+	phys_base = offset | (space << 32ULL);
+
+	return remap_pfn_range(vma, from, phys_base >> PAGE_SHIFT, size, prot);
+}
+
 #define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
 #define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
 ({									  \

arch/sparc/include/asm/pgtable_64.h

@@ -757,10 +757,6 @@ static inline bool kern_addr_valid(unsigned long addr)
 
 extern int page_in_phys_avail(unsigned long paddr);
 
-extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
-			       unsigned long pfn,
-			       unsigned long size, pgprot_t prot);
-
 /*
  * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
  * its high 4 bits.  These macros/functions put it there or get it from there.
@@ -769,6 +765,22 @@ extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
 #define GET_IOSPACE(pfn)		(pfn >> (BITS_PER_LONG - 4))
 #define GET_PFN(pfn)			(pfn & 0x0fffffffffffffffUL)
 
+extern int remap_pfn_range(struct vm_area_struct *, unsigned long, unsigned long,
+			   unsigned long, pgprot_t);
+
+static inline int io_remap_pfn_range(struct vm_area_struct *vma,
+				     unsigned long from, unsigned long pfn,
+				     unsigned long size, pgprot_t prot)
+{
+	unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
+	int space = GET_IOSPACE(pfn);
+	unsigned long phys_base;
+
+	phys_base = offset | (((unsigned long) space) << 32UL);
+
+	return remap_pfn_range(vma, from, phys_base >> PAGE_SHIFT, size, prot);
+}
+
 #include <asm-generic/pgtable.h>
 
 /* We provide our own get_unmapped_area to cope with VA holes and

arch/sparc/kernel/entry.h

@@ -42,6 +42,9 @@ extern void fpsave(unsigned long *fpregs, unsigned long *fsr,
 extern void fpload(unsigned long *fpregs, unsigned long *fsr);
 
 #else /* CONFIG_SPARC32 */
+
+#include <asm/trap_block.h>
+
 struct popc_3insn_patch_entry {
 	unsigned int	addr;
 	unsigned int	insns[3];
@@ -57,6 +60,10 @@ extern struct popc_6insn_patch_entry __popc_6insn_patch,
 	__popc_6insn_patch_end;
 
 extern void __init per_cpu_patch(void);
+extern void sun4v_patch_1insn_range(struct sun4v_1insn_patch_entry *,
+				    struct sun4v_1insn_patch_entry *);
+extern void sun4v_patch_2insn_range(struct sun4v_2insn_patch_entry *,
+				    struct sun4v_2insn_patch_entry *);
 extern void __init sun4v_patch(void);
 extern void __init boot_cpu_id_too_large(int cpu);
 extern unsigned int dcache_parity_tl1_occurred;

arch/sparc/kernel/module.c

@@ -17,6 +17,8 @@
 #include <asm/processor.h>
 #include <asm/spitfire.h>
 
+#include "entry.h"
+
 #ifdef CONFIG_SPARC64
 
 #include <linux/jump_label.h>
@@ -203,6 +205,29 @@ int apply_relocate_add(Elf_Shdr *sechdrs,
 }
 
 #ifdef CONFIG_SPARC64
+static void do_patch_sections(const Elf_Ehdr *hdr,
+			      const Elf_Shdr *sechdrs)
+{
+	const Elf_Shdr *s, *sun4v_1insn = NULL, *sun4v_2insn = NULL;
+	char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+
+	for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) {
+		if (!strcmp(".sun4v_1insn_patch", secstrings + s->sh_name))
+			sun4v_1insn = s;
+		if (!strcmp(".sun4v_2insn_patch", secstrings + s->sh_name))
+			sun4v_2insn = s;
+	}
+
+	if (sun4v_1insn && tlb_type == hypervisor) {
+		void *p = (void *) sun4v_1insn->sh_addr;
+		sun4v_patch_1insn_range(p, p + sun4v_1insn->sh_size);
+	}
+	if (sun4v_2insn && tlb_type == hypervisor) {
+		void *p = (void *) sun4v_2insn->sh_addr;
+		sun4v_patch_2insn_range(p, p + sun4v_2insn->sh_size);
+	}
+}
+
 int module_finalize(const Elf_Ehdr *hdr,
 		    const Elf_Shdr *sechdrs,
 		    struct module *me)
@@ -210,6 +235,8 @@ int module_finalize(const Elf_Ehdr *hdr,
 	/* make jump label nops */
 	jump_label_apply_nops(me);
 
+	do_patch_sections(hdr, sechdrs);
+
 	/* Cheetah's I-cache is fully coherent.  */
 	if (tlb_type == spitfire) {
 		unsigned long va;

arch/sparc/kernel/setup_64.c

@@ -234,40 +234,50 @@ void __init per_cpu_patch(void)
 	}
 }
 
+void sun4v_patch_1insn_range(struct sun4v_1insn_patch_entry *start,
+			     struct sun4v_1insn_patch_entry *end)
+{
+	while (start < end) {
+		unsigned long addr = start->addr;
+
+		*(unsigned int *) (addr +  0) = start->insn;
+		wmb();
+		__asm__ __volatile__("flush	%0" : : "r" (addr +  0));
+
+		start++;
+	}
+}
+
+void sun4v_patch_2insn_range(struct sun4v_2insn_patch_entry *start,
+			     struct sun4v_2insn_patch_entry *end)
+{
+	while (start < end) {
+		unsigned long addr = start->addr;
+
+		*(unsigned int *) (addr +  0) = start->insns[0];
+		wmb();
+		__asm__ __volatile__("flush	%0" : : "r" (addr +  0));
+
+		*(unsigned int *) (addr +  4) = start->insns[1];
+		wmb();
+		__asm__ __volatile__("flush	%0" : : "r" (addr +  4));
+
+		start++;
+	}
+}
+
 void __init sun4v_patch(void)
 {
 	extern void sun4v_hvapi_init(void);
-	struct sun4v_1insn_patch_entry *p1;
-	struct sun4v_2insn_patch_entry *p2;
 
 	if (tlb_type != hypervisor)
 		return;
 
-	p1 = &__sun4v_1insn_patch;
+	sun4v_patch_1insn_range(&__sun4v_1insn_patch,
-	while (p1 < &__sun4v_1insn_patch_end) {
+				&__sun4v_1insn_patch_end);
-		unsigned long addr = p1->addr;
 
-		*(unsigned int *) (addr +  0) = p1->insn;
+	sun4v_patch_2insn_range(&__sun4v_2insn_patch,
-		wmb();
+				&__sun4v_2insn_patch_end);
-		__asm__ __volatile__("flush	%0" : : "r" (addr +  0));
-
-		p1++;
-	}
-
-	p2 = &__sun4v_2insn_patch;
-	while (p2 < &__sun4v_2insn_patch_end) {
-		unsigned long addr = p2->addr;
-
-		*(unsigned int *) (addr +  0) = p2->insns[0];
-		wmb();
-		__asm__ __volatile__("flush	%0" : : "r" (addr +  0));
-
-		*(unsigned int *) (addr +  4) = p2->insns[1];
-		wmb();
-		__asm__ __volatile__("flush	%0" : : "r" (addr +  4));
-
-		p2++;
-	}
 
 	sun4v_hvapi_init();
 }

arch/sparc/kernel/signal32.c

@@ -822,21 +822,23 @@ static inline void syscall_restart32(unsigned long orig_i0, struct pt_regs *regs
  * want to handle. Thus you cannot kill init even with a SIGKILL even by
  * mistake.
  */
-void do_signal32(sigset_t *oldset, struct pt_regs * regs,
+void do_signal32(sigset_t *oldset, struct pt_regs * regs)
-		 int restart_syscall, unsigned long orig_i0)
 {
 	struct k_sigaction ka;
+	unsigned long orig_i0;
+	int restart_syscall;
 	siginfo_t info;
 	int signr;
 	
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 
-	/* If the debugger messes with the program counter, it clears
-	 * the "in syscall" bit, directing us to not perform a syscall
-	 * restart.
-	 */
-	if (restart_syscall && !pt_regs_is_syscall(regs))
 	restart_syscall = 0;
+	orig_i0 = 0;
+	if (pt_regs_is_syscall(regs) &&
+	    (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) {
+		restart_syscall = 1;
+		orig_i0 = regs->u_regs[UREG_G6];
+	}
 
 	if (signr > 0) {
 		if (restart_syscall)

arch/sparc/kernel/signal_32.c

@@ -519,10 +519,26 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
 	siginfo_t info;
 	int signr;
 
+	/* It's a lot of work and synchronization to add a new ptrace
+	 * register for GDB to save and restore in order to get
+	 * orig_i0 correct for syscall restarts when debugging.
+	 *
+	 * Although it should be the case that most of the global
+	 * registers are volatile across a system call, glibc already
+	 * depends upon that fact that we preserve them.  So we can't
+	 * just use any global register to save away the orig_i0 value.
+	 *
+	 * In particular %g2, %g3, %g4, and %g5 are all assumed to be
+	 * preserved across a system call trap by various pieces of
+	 * code in glibc.
+	 *
+	 * %g7 is used as the "thread register".   %g6 is not used in
+	 * any fixed manner.  %g6 is used as a scratch register and
+	 * a compiler temporary, but it's value is never used across
+	 * a system call.  Therefore %g6 is usable for orig_i0 storage.
+	 */
 	if (pt_regs_is_syscall(regs) && (regs->psr & PSR_C))
-		restart_syscall = 1;
+		regs->u_regs[UREG_G6] = orig_i0;
-	else
-		restart_syscall = 0;
 
 	if (test_thread_flag(TIF_RESTORE_SIGMASK))
 		oldset = &current->saved_sigmask;
@@ -535,8 +551,12 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
 	 * the software "in syscall" bit, directing us to not perform
 	 * a syscall restart.
 	 */
-	if (restart_syscall && !pt_regs_is_syscall(regs))
 	restart_syscall = 0;
+	if (pt_regs_is_syscall(regs) && (regs->psr & PSR_C)) {
+		restart_syscall = 1;
+		orig_i0 = regs->u_regs[UREG_G6];
+	}
+
 
 	if (signr > 0) {
 		if (restart_syscall)

arch/sparc/kernel/signal_64.c

@@ -529,11 +529,27 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
 	siginfo_t info;
 	int signr;
 	
+	/* It's a lot of work and synchronization to add a new ptrace
+	 * register for GDB to save and restore in order to get
+	 * orig_i0 correct for syscall restarts when debugging.
+	 *
+	 * Although it should be the case that most of the global
+	 * registers are volatile across a system call, glibc already
+	 * depends upon that fact that we preserve them.  So we can't
+	 * just use any global register to save away the orig_i0 value.
+	 *
+	 * In particular %g2, %g3, %g4, and %g5 are all assumed to be
+	 * preserved across a system call trap by various pieces of
+	 * code in glibc.
+	 *
+	 * %g7 is used as the "thread register".   %g6 is not used in
+	 * any fixed manner.  %g6 is used as a scratch register and
+	 * a compiler temporary, but it's value is never used across
+	 * a system call.  Therefore %g6 is usable for orig_i0 storage.
+	 */
 	if (pt_regs_is_syscall(regs) &&
-	    (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) {
+	    (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY)))
-		restart_syscall = 1;
+		regs->u_regs[UREG_G6] = orig_i0;
-	} else
-		restart_syscall = 0;
 
 	if (current_thread_info()->status & TS_RESTORE_SIGMASK)
 		oldset = &current->saved_sigmask;
@@ -542,22 +558,20 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
 
 #ifdef CONFIG_COMPAT
 	if (test_thread_flag(TIF_32BIT)) {
-		extern void do_signal32(sigset_t *, struct pt_regs *,
+		extern void do_signal32(sigset_t *, struct pt_regs *);
-					int restart_syscall,
+		do_signal32(oldset, regs);
-					unsigned long orig_i0);
-		do_signal32(oldset, regs, restart_syscall, orig_i0);
 		return;
 	}
 #endif	
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 
-	/* If the debugger messes with the program counter, it clears
-	 * the software "in syscall" bit, directing us to not perform
-	 * a syscall restart.
-	 */
-	if (restart_syscall && !pt_regs_is_syscall(regs))
 	restart_syscall = 0;
+	if (pt_regs_is_syscall(regs) &&
+	    (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) {
+		restart_syscall = 1;
+		orig_i0 = regs->u_regs[UREG_G6];
+	}
 
 	if (signr > 0) {
 		if (restart_syscall)

arch/sparc/kernel/sigutil_64.c

@@ -2,6 +2,7 @@
 #include <linux/types.h>
 #include <linux/thread_info.h>
 #include <linux/uaccess.h>
+#include <linux/errno.h>
 
 #include <asm/sigcontext.h>
 #include <asm/fpumacro.h>

arch/sparc/mm/Makefile

@@ -8,7 +8,6 @@ obj-$(CONFIG_SPARC64)   += ultra.o tlb.o tsb.o gup.o
 obj-y                   += fault_$(BITS).o
 obj-y                   += init_$(BITS).o
 obj-$(CONFIG_SPARC32)   += loadmmu.o
-obj-y                   += generic_$(BITS).o
 obj-$(CONFIG_SPARC32)   += extable.o btfixup.o srmmu.o iommu.o io-unit.o
 obj-$(CONFIG_SPARC32)   += hypersparc.o viking.o tsunami.o swift.o
 obj-$(CONFIG_SPARC_LEON)+= leon_mm.o

arch/sparc/mm/generic_32.c

@@ -1,99 +0,0 @@
-/*
- * generic.c: Generic Sparc mm routines that are not dependent upon
- *            MMU type but are Sparc specific.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/pagemap.h>
-#include <linux/export.h>
-
-#include <asm/pgalloc.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-
-/* Remap IO memory, the same way as remap_pfn_range(), but use
- * the obio memory space.
- *
- * They use a pgprot that sets PAGE_IO and does not check the
- * mem_map table as this is independent of normal memory.
- */
-static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte, unsigned long address, unsigned long size,
-	unsigned long offset, pgprot_t prot, int space)
-{
-	unsigned long end;
-
-	address &= ~PMD_MASK;
-	end = address + size;
-	if (end > PMD_SIZE)
-		end = PMD_SIZE;
-	do {
-		set_pte_at(mm, address, pte, mk_pte_io(offset, prot, space));
-		address += PAGE_SIZE;
-		offset += PAGE_SIZE;
-		pte++;
-	} while (address < end);
-}
-
-static inline int io_remap_pmd_range(struct mm_struct *mm, pmd_t * pmd, unsigned long address, unsigned long size,
-	unsigned long offset, pgprot_t prot, int space)
-{
-	unsigned long end;
-
-	address &= ~PGDIR_MASK;
-	end = address + size;
-	if (end > PGDIR_SIZE)
-		end = PGDIR_SIZE;
-	offset -= address;
-	do {
-		pte_t *pte = pte_alloc_map(mm, NULL, pmd, address);
-		if (!pte)
-			return -ENOMEM;
-		io_remap_pte_range(mm, pte, address, end - address, address + offset, prot, space);
-		address = (address + PMD_SIZE) & PMD_MASK;
-		pmd++;
-	} while (address < end);
-	return 0;
-}
-
-int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
-		       unsigned long pfn, unsigned long size, pgprot_t prot)
-{
-	int error = 0;
-	pgd_t * dir;
-	unsigned long beg = from;
-	unsigned long end = from + size;
-	struct mm_struct *mm = vma->vm_mm;
-	int space = GET_IOSPACE(pfn);
-	unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
-
-	/* See comment in mm/memory.c remap_pfn_range */
-	vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
-	vma->vm_pgoff = (offset >> PAGE_SHIFT) |
-		((unsigned long)space << 28UL);
-
-	offset -= from;
-	dir = pgd_offset(mm, from);
-	flush_cache_range(vma, beg, end);
-
-	while (from < end) {
-		pmd_t *pmd = pmd_alloc(mm, dir, from);
-		error = -ENOMEM;
-		if (!pmd)
-			break;
-		error = io_remap_pmd_range(mm, pmd, from, end - from, offset + from, prot, space);
-		if (error)
-			break;
-		from = (from + PGDIR_SIZE) & PGDIR_MASK;
-		dir++;
-	}
-
-	flush_tlb_range(vma, beg, end);
-	return error;
-}
-EXPORT_SYMBOL(io_remap_pfn_range);

arch/sparc/mm/generic_64.c

@@ -1,165 +0,0 @@
-/*
- * generic.c: Generic Sparc mm routines that are not dependent upon
- *            MMU type but are Sparc specific.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/export.h>
-#include <linux/pagemap.h>
-
-#include <asm/pgalloc.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/tlbflush.h>
-
-/* Remap IO memory, the same way as remap_pfn_range(), but use
- * the obio memory space.
- *
- * They use a pgprot that sets PAGE_IO and does not check the
- * mem_map table as this is independent of normal memory.
- */
-static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte,
-				      unsigned long address,
-				      unsigned long size,
-				      unsigned long offset, pgprot_t prot,
-				      int space)
-{
-	unsigned long end;
-
-	/* clear hack bit that was used as a write_combine side-effect flag */
-	offset &= ~0x1UL;
-	address &= ~PMD_MASK;
-	end = address + size;
-	if (end > PMD_SIZE)
-		end = PMD_SIZE;
-	do {
-		pte_t entry;
-		unsigned long curend = address + PAGE_SIZE;
-		
-		entry = mk_pte_io(offset, prot, space, PAGE_SIZE);
-		if (!(address & 0xffff)) {
-			if (PAGE_SIZE < (4 * 1024 * 1024) &&
-			    !(address & 0x3fffff) &&
-			    !(offset & 0x3ffffe) &&
-			    end >= address + 0x400000) {
-				entry = mk_pte_io(offset, prot, space,
-						  4 * 1024 * 1024);
-				curend = address + 0x400000;
-				offset += 0x400000;
-			} else if (PAGE_SIZE < (512 * 1024) &&
-				   !(address & 0x7ffff) &&
-				   !(offset & 0x7fffe) &&
-				   end >= address + 0x80000) {
-				entry = mk_pte_io(offset, prot, space,
-						  512 * 1024 * 1024);
-				curend = address + 0x80000;
-				offset += 0x80000;
-			} else if (PAGE_SIZE < (64 * 1024) &&
-				   !(offset & 0xfffe) &&
-				   end >= address + 0x10000) {
-				entry = mk_pte_io(offset, prot, space,
-						  64 * 1024);
-				curend = address + 0x10000;
-				offset += 0x10000;
-			} else
-				offset += PAGE_SIZE;
-		} else
-			offset += PAGE_SIZE;
-
-		if (pte_write(entry))
-			entry = pte_mkdirty(entry);
-		do {
-			BUG_ON(!pte_none(*pte));
-			set_pte_at(mm, address, pte, entry);
-			address += PAGE_SIZE;
-			pte_val(entry) += PAGE_SIZE;
-			pte++;
-		} while (address < curend);
-	} while (address < end);
-}
-
-static inline int io_remap_pmd_range(struct mm_struct *mm, pmd_t * pmd, unsigned long address, unsigned long size,
-	unsigned long offset, pgprot_t prot, int space)
-{
-	unsigned long end;
-
-	address &= ~PGDIR_MASK;
-	end = address + size;
-	if (end > PGDIR_SIZE)
-		end = PGDIR_SIZE;
-	offset -= address;
-	do {
-		pte_t *pte = pte_alloc_map(mm, NULL, pmd, address);
-		if (!pte)
-			return -ENOMEM;
-		io_remap_pte_range(mm, pte, address, end - address, address + offset, prot, space);
-		pte_unmap(pte);
-		address = (address + PMD_SIZE) & PMD_MASK;
-		pmd++;
-	} while (address < end);
-	return 0;
-}
-
-static inline int io_remap_pud_range(struct mm_struct *mm, pud_t * pud, unsigned long address, unsigned long size,
-	unsigned long offset, pgprot_t prot, int space)
-{
-	unsigned long end;
-
-	address &= ~PUD_MASK;
-	end = address + size;
-	if (end > PUD_SIZE)
-		end = PUD_SIZE;
-	offset -= address;
-	do {
-		pmd_t *pmd = pmd_alloc(mm, pud, address);
-		if (!pud)
-			return -ENOMEM;
-		io_remap_pmd_range(mm, pmd, address, end - address, address + offset, prot, space);
-		address = (address + PUD_SIZE) & PUD_MASK;
-		pud++;
-	} while (address < end);
-	return 0;
-}
-
-int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
-		unsigned long pfn, unsigned long size, pgprot_t prot)
-{
-	int error = 0;
-	pgd_t * dir;
-	unsigned long beg = from;
-	unsigned long end = from + size;
-	struct mm_struct *mm = vma->vm_mm;
-	int space = GET_IOSPACE(pfn);
-	unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
-	unsigned long phys_base;
-
-	phys_base = offset | (((unsigned long) space) << 32UL);
-
-	/* See comment in mm/memory.c remap_pfn_range */
-	vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
-	vma->vm_pgoff = phys_base >> PAGE_SHIFT;
-
-	offset -= from;
-	dir = pgd_offset(mm, from);
-	flush_cache_range(vma, beg, end);
-
-	while (from < end) {
-		pud_t *pud = pud_alloc(mm, dir, from);
-		error = -ENOMEM;
-		if (!pud)
-			break;
-		error = io_remap_pud_range(mm, pud, from, end - from, offset + from, prot, space);
-		if (error)
-			break;
-		from = (from + PGDIR_SIZE) & PGDIR_MASK;
-		dir++;
-	}
-
-	flush_tlb_range(vma, beg, end);
-	return error;
-}
-EXPORT_SYMBOL(io_remap_pfn_range);

arch/unicore32/Kconfig

@@ -237,13 +237,13 @@ menu "PKUnity NetBook-0916 Features"
 
 config I2C_BATTERY_BQ27200
 	tristate "I2C Battery BQ27200 Support"
-	select PUV3_I2C
+	select I2C_PUV3
 	select POWER_SUPPLY
 	select BATTERY_BQ27x00
 
 config I2C_EEPROM_AT24
 	tristate "I2C EEPROMs AT24 support"
-	select PUV3_I2C
+	select I2C_PUV3
 	select MISC_DEVICES
 	select EEPROM_AT24
 

arch/unicore32/Kconfig.debug

@@ -44,18 +44,4 @@ config DEBUG_OCD
 	  Say Y here if you want the debug print routines to direct their
 	  output to the UniCore On-Chip-Debugger channel using CP #1.
 
-config DEBUG_OCD_BREAKPOINT
-	bool "Breakpoint support via On-Chip-Debugger"
-	depends on DEBUG_OCD
-
-config DEBUG_UART
-	int "Kernel low-level debugging messages via serial port"
-	depends on DEBUG_LL
-	range 0 1
-	default "0"
-	help
-	  Choice for UART for kernel low-level using PKUnity UARTS,
-	  should be between zero and one. The port must have been
-	  initialised by the boot-loader before use.
-
 endmenu

arch/unicore32/boot/compressed/Makefile

@@ -10,8 +10,8 @@
 # Copyright (C) 2001~2010 GUAN Xue-tao
 #
 
-EXTRA_CFLAGS	:= -fpic -fno-builtin
+ccflags-y	:= -fpic -fno-builtin
-EXTRA_AFLAGS	:= -Wa,-march=all
+asflags-y	:= -Wa,-march=all
 
 OBJS		:= misc.o
 

arch/unicore32/include/asm/bitops.h

@@ -13,12 +13,6 @@
 #ifndef __UNICORE_BITOPS_H__
 #define __UNICORE_BITOPS_H__
 
-#define find_next_bit		__uc32_find_next_bit
-#define find_next_zero_bit	__uc32_find_next_zero_bit
-
-#define find_first_bit		__uc32_find_first_bit
-#define find_first_zero_bit	__uc32_find_first_zero_bit
-
 #define _ASM_GENERIC_BITOPS_FLS_H_
 #define _ASM_GENERIC_BITOPS___FLS_H_
 #define _ASM_GENERIC_BITOPS_FFS_H_
@@ -44,4 +38,10 @@ static inline int fls(int x)
 
 #include <asm-generic/bitops.h>
 
+/* following definitions: to avoid using codes in lib/find_*.c */
+#define find_next_bit		find_next_bit
+#define find_next_zero_bit	find_next_zero_bit
+#define find_first_bit		find_first_bit
+#define find_first_zero_bit	find_first_zero_bit
+
 #endif /* __UNICORE_BITOPS_H__ */

arch/unicore32/include/asm/processor.h

@@ -53,7 +53,6 @@ struct thread_struct {
 #define start_thread(regs, pc, sp)					\
 ({									\
 	unsigned long *stack = (unsigned long *)sp;			\
-	set_fs(USER_DS);						\
 	memset(regs->uregs, 0, sizeof(regs->uregs));			\
 	regs->UCreg_asr = USER_MODE;					\
 	regs->UCreg_pc = pc & ~1;	/* pc */                        \

arch/unicore32/kernel/ksyms.c

@@ -24,8 +24,8 @@
 
 #include "ksyms.h"
 
-EXPORT_SYMBOL(__uc32_find_next_zero_bit);
+EXPORT_SYMBOL(find_next_zero_bit);
-EXPORT_SYMBOL(__uc32_find_next_bit);
+EXPORT_SYMBOL(find_next_bit);
 
 EXPORT_SYMBOL(__backtrace);
 

arch/unicore32/lib/findbit.S

@@ -17,7 +17,7 @@
  * Purpose  : Find a 'zero' bit
  * Prototype: int find_first_zero_bit(void *addr, unsigned int maxbit);
  */
-__uc32_find_first_zero_bit:
+ENTRY(find_first_zero_bit)
 		cxor.a	r1, #0
 		beq	3f
 		mov	r2, #0
@@ -29,13 +29,14 @@ __uc32_find_first_zero_bit:
 		bub	1b
 3:		mov	r0, r1			@ no free bits
 		mov	pc, lr
+ENDPROC(find_first_zero_bit)
 
 /*
  * Purpose  : Find next 'zero' bit
  * Prototype: int find_next_zero_bit
  *		(void *addr, unsigned int maxbit, int offset)
  */
-ENTRY(__uc32_find_next_zero_bit)
+ENTRY(find_next_zero_bit)
 		cxor.a	r1, #0
 		beq	3b
 		and.a	ip, r2, #7
@@ -47,14 +48,14 @@ ENTRY(__uc32_find_next_zero_bit)
 		or	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
-ENDPROC(__uc32_find_next_zero_bit)
+ENDPROC(find_next_zero_bit)
 
 /*
  * Purpose  : Find a 'one' bit
  * Prototype: int find_first_bit
  *		(const unsigned long *addr, unsigned int maxbit);
  */
-__uc32_find_first_bit:
+ENTRY(find_first_bit)
 		cxor.a	r1, #0
 		beq	3f
 		mov	r2, #0
@@ -66,13 +67,14 @@ __uc32_find_first_bit:
 		bub	1b
 3:		mov	r0, r1			@ no free bits
 		mov	pc, lr
+ENDPROC(find_first_bit)
 
 /*
  * Purpose  : Find next 'one' bit
  * Prototype: int find_next_zero_bit
  *		(void *addr, unsigned int maxbit, int offset)
  */
-ENTRY(__uc32_find_next_bit)
+ENTRY(find_next_bit)
 		cxor.a	r1, #0
 		beq	3b
 		and.a	ip, r2, #7
@@ -83,7 +85,7 @@ ENTRY(__uc32_find_next_bit)
 		or	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
-ENDPROC(__uc32_find_next_bit)
+ENDPROC(find_next_bit)
 
 /*
  * One or more bits in the LSB of r3 are assumed to be set.

arch/x86/include/asm/apic.h

@@ -49,6 +49,7 @@ extern unsigned int apic_verbosity;
 extern int local_apic_timer_c2_ok;
 
 extern int disable_apic;
+extern unsigned int lapic_timer_frequency;
 
 #ifdef CONFIG_SMP
 extern void __inquire_remote_apic(int apicid);

arch/x86/include/asm/mach_traps.h

@@ -17,7 +17,7 @@
 #define NMI_REASON_CLEAR_IOCHK	0x08
 #define NMI_REASON_CLEAR_MASK	0x0f
 
-static inline unsigned char get_nmi_reason(void)
+static inline unsigned char default_get_nmi_reason(void)
 {
 	return inb(NMI_REASON_PORT);
 }

arch/x86/include/asm/mce.h

@@ -201,7 +201,10 @@ int mce_notify_irq(void);
 void mce_notify_process(void);
 
 DECLARE_PER_CPU(struct mce, injectm);
-extern struct file_operations mce_chrdev_ops;
+
+extern void register_mce_write_callback(ssize_t (*)(struct file *filp,
+				    const char __user *ubuf,
+				    size_t usize, loff_t *off));
 
 /*
  * Exception handler

arch/x86/include/asm/mrst.h

@@ -44,6 +44,13 @@ enum mrst_timer_options {
 
 extern enum mrst_timer_options mrst_timer_options;
 
+/*
+ * Penwell uses spread spectrum clock, so the freq number is not exactly
+ * the same as reported by MSR based on SDM.
+ */
+#define PENWELL_FSB_FREQ_83SKU         83200
+#define PENWELL_FSB_FREQ_100SKU        99840
+
 #define SFI_MTMR_MAX_NUM 8
 #define SFI_MRTC_MAX	8
 

arch/x86/include/asm/x86_init.h

@@ -152,6 +152,7 @@ struct x86_cpuinit_ops {
 /**
  * struct x86_platform_ops - platform specific runtime functions
  * @calibrate_tsc:		calibrate TSC
+ * @wallclock_init:		init the wallclock device
  * @get_wallclock:		get time from HW clock like RTC etc.
  * @set_wallclock:		set time back to HW clock
  * @is_untracked_pat_range	exclude from PAT logic
@@ -160,11 +161,13 @@ struct x86_cpuinit_ops {
  */
 struct x86_platform_ops {
 	unsigned long (*calibrate_tsc)(void);
+	void (*wallclock_init)(void);
 	unsigned long (*get_wallclock)(void);
 	int (*set_wallclock)(unsigned long nowtime);
 	void (*iommu_shutdown)(void);
 	bool (*is_untracked_pat_range)(u64 start, u64 end);
 	void (*nmi_init)(void);
+	unsigned char (*get_nmi_reason)(void);
 	int (*i8042_detect)(void);
 };
 

arch/x86/kernel/alternative.c

@@ -738,5 +738,5 @@ void __kprobes text_poke_smp_batch(struct text_poke_param *params, int n)
 
 	atomic_set(&stop_machine_first, 1);
 	wrote_text = 0;
-	__stop_machine(stop_machine_text_poke, (void *)&tpp, NULL);
+	__stop_machine(stop_machine_text_poke, (void *)&tpp, cpu_online_mask);
 }