ARM: shmobile: Initial r8a7791 SoC support
Add initial support for the r8a7791 SoC including: - Single Cortex-A15 CPU Core - GIC No static virtual mappings are used, all the components make use of ioremap(). DT_MACHINE_START is still wrapped in CONFIG_USE_OF to match other mach-shmobile code. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com> [damm@opensource.se: Forward ported to upstream, dropped not-yet-ready code] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This commit is contained in:
Hisashi Nakamura
Simon Horman
parent
a93c2aaf18
commit
0d0771ab2b
|
|
@ -0,0 +1,41 @@
|
|||
/*
|
||||
* Device Tree Source for the r8a7791 SoC
|
||||
*
|
||||
* Copyright (C) 2013 Renesas Electronics Corporation
|
||||
* Copyright (C) 2013 Renesas Solutions Corp.
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public License
|
||||
* version 2. This program is licensed "as is" without any warranty of any
|
||||
* kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/ {
|
||||
compatible = "renesas,r8a7791";
|
||||
interrupt-parent = <&gic>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu0: cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <0>;
|
||||
clock-frequency = <1300000000>;
|
||||
};
|
||||
};
|
||||
|
||||
gic: interrupt-controller@f1001000 {
|
||||
compatible = "arm,cortex-a15-gic";
|
||||
#interrupt-cells = <3>;
|
||||
#address-cells = <0>;
|
||||
interrupt-controller;
|
||||
reg = <0 0xf1001000 0 0x1000>,
|
||||
<0 0xf1002000 0 0x1000>,
|
||||
<0 0xf1004000 0 0x2000>,
|
||||
<0 0xf1006000 0 0x2000>;
|
||||
interrupts = <1 9 0xf04>;
|
||||
};
|
||||
};
|
||||
|
|
@ -101,6 +101,12 @@ config ARCH_R8A7790
|
|||
select SH_CLK_CPG
|
||||
select RENESAS_IRQC
|
||||
|
||||
config ARCH_R8A7791
|
||||
bool "R-Car M2 (R8A77910)"
|
||||
select ARM_GIC
|
||||
select CPU_V7
|
||||
select SH_CLK_CPG
|
||||
|
||||
config ARCH_EMEV2
|
||||
bool "Emma Mobile EV2"
|
||||
select ARCH_WANT_OPTIONAL_GPIOLIB
|
||||
|
|
|
|||
|
|
@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o
|
|||
obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o
|
||||
obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o
|
||||
obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o
|
||||
obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o
|
||||
obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o
|
||||
|
||||
# Clock objects
|
||||
|
|
@ -27,6 +28,7 @@ obj-$(CONFIG_ARCH_R8A7740) += clock-r8a7740.o
|
|||
obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o
|
||||
obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o
|
||||
obj-$(CONFIG_ARCH_R8A7790) += clock-r8a7790.o
|
||||
obj-$(CONFIG_ARCH_R8A7791) += clock-r8a7791.o
|
||||
obj-$(CONFIG_ARCH_EMEV2) += clock-emev2.o
|
||||
endif
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,198 @@
|
|||
/*
|
||||
* r8a7791 clock framework support
|
||||
*
|
||||
* Copyright (C) 2013 Renesas Electronics Corporation
|
||||
* Copyright (C) 2013 Renesas Solutions Corp.
|
||||
* Copyright (C) 2013 Magnus Damm
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
#include <linux/init.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/sh_clk.h>
|
||||
#include <linux/clkdev.h>
|
||||
#include <mach/clock.h>
|
||||
#include <mach/common.h>
|
||||
|
||||
/*
|
||||
* MD EXTAL PLL0 PLL1 PLL3
|
||||
* 14 13 19 (MHz) *1 *1
|
||||
*---------------------------------------------------
|
||||
* 0 0 0 15 x 1 x172/2 x208/2 x106
|
||||
* 0 0 1 15 x 1 x172/2 x208/2 x88
|
||||
* 0 1 0 20 x 1 x130/2 x156/2 x80
|
||||
* 0 1 1 20 x 1 x130/2 x156/2 x66
|
||||
* 1 0 0 26 / 2 x200/2 x240/2 x122
|
||||
* 1 0 1 26 / 2 x200/2 x240/2 x102
|
||||
* 1 1 0 30 / 2 x172/2 x208/2 x106
|
||||
* 1 1 1 30 / 2 x172/2 x208/2 x88
|
||||
*
|
||||
* *1 : Table 7.6 indicates VCO ouput (PLLx = VCO/2)
|
||||
* see "p1 / 2" on R8A7791_CLOCK_ROOT() below
|
||||
*/
|
||||
|
||||
#define MD(nr) (1 << nr)
|
||||
|
||||
#define CPG_BASE 0xe6150000
|
||||
#define CPG_LEN 0x1000
|
||||
|
||||
#define SMSTPCR1 0xE6150134
|
||||
#define SMSTPCR2 0xe6150138
|
||||
#define SMSTPCR3 0xE615013C
|
||||
#define SMSTPCR5 0xE6150144
|
||||
#define SMSTPCR7 0xe615014c
|
||||
#define SMSTPCR8 0xE6150990
|
||||
#define SMSTPCR9 0xE6150994
|
||||
#define SMSTPCR10 0xE6150998
|
||||
|
||||
#define MODEMR 0xE6160060
|
||||
#define SDCKCR 0xE6150074
|
||||
#define SD2CKCR 0xE6150078
|
||||
#define SD3CKCR 0xE615007C
|
||||
#define MMC0CKCR 0xE6150240
|
||||
#define MMC1CKCR 0xE6150244
|
||||
#define SSPCKCR 0xE6150248
|
||||
#define SSPRSCKCR 0xE615024C
|
||||
|
||||
static struct clk_mapping cpg_mapping = {
|
||||
.phys = CPG_BASE,
|
||||
.len = CPG_LEN,
|
||||
};
|
||||
|
||||
static struct clk extal_clk = {
|
||||
/* .rate will be updated on r8a7791_clock_init() */
|
||||
.mapping = &cpg_mapping,
|
||||
};
|
||||
|
||||
static struct sh_clk_ops followparent_clk_ops = {
|
||||
.recalc = followparent_recalc,
|
||||
};
|
||||
|
||||
static struct clk main_clk = {
|
||||
/* .parent will be set r8a73a4_clock_init */
|
||||
.ops = &followparent_clk_ops,
|
||||
};
|
||||
|
||||
/*
|
||||
* clock ratio of these clock will be updated
|
||||
* on r8a7791_clock_init()
|
||||
*/
|
||||
SH_FIXED_RATIO_CLK_SET(pll1_clk, main_clk, 1, 1);
|
||||
SH_FIXED_RATIO_CLK_SET(pll3_clk, main_clk, 1, 1);
|
||||
|
||||
/* fixed ratio clock */
|
||||
SH_FIXED_RATIO_CLK_SET(extal_div2_clk, extal_clk, 1, 2);
|
||||
SH_FIXED_RATIO_CLK_SET(cp_clk, extal_clk, 1, 2);
|
||||
|
||||
SH_FIXED_RATIO_CLK_SET(pll1_div2_clk, pll1_clk, 1, 2);
|
||||
SH_FIXED_RATIO_CLK_SET(hp_clk, pll1_clk, 1, 12);
|
||||
SH_FIXED_RATIO_CLK_SET(p_clk, pll1_clk, 1, 24);
|
||||
|
||||
SH_FIXED_RATIO_CLK_SET(mp_clk, pll1_div2_clk, 1, 15);
|
||||
|
||||
static struct clk *main_clks[] = {
|
||||
&extal_clk,
|
||||
&extal_div2_clk,
|
||||
&main_clk,
|
||||
&pll1_clk,
|
||||
&pll1_div2_clk,
|
||||
&pll3_clk,
|
||||
&hp_clk,
|
||||
&p_clk,
|
||||
&mp_clk,
|
||||
&cp_clk,
|
||||
};
|
||||
|
||||
/* MSTP */
|
||||
enum {
|
||||
MSTP721, MSTP720,
|
||||
/* MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202,*/
|
||||
MSTP_NR
|
||||
};
|
||||
|
||||
static struct clk mstp_clks[MSTP_NR] = {
|
||||
[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
|
||||
[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
|
||||
};
|
||||
|
||||
static struct clk_lookup lookups[] = {
|
||||
|
||||
/* main clocks */
|
||||
CLKDEV_CON_ID("extal", &extal_clk),
|
||||
CLKDEV_CON_ID("extal_div2", &extal_div2_clk),
|
||||
CLKDEV_CON_ID("main", &main_clk),
|
||||
CLKDEV_CON_ID("pll1", &pll1_clk),
|
||||
CLKDEV_CON_ID("pll1_div2", &pll1_div2_clk),
|
||||
CLKDEV_CON_ID("pll3", &pll3_clk),
|
||||
CLKDEV_CON_ID("hp", &hp_clk),
|
||||
CLKDEV_CON_ID("p", &p_clk),
|
||||
CLKDEV_CON_ID("mp", &mp_clk),
|
||||
CLKDEV_CON_ID("cp", &cp_clk),
|
||||
CLKDEV_CON_ID("peripheral_clk", &hp_clk),
|
||||
};
|
||||
|
||||
#define R8A7791_CLOCK_ROOT(e, m, p0, p1, p30, p31) \
|
||||
extal_clk.rate = e * 1000 * 1000; \
|
||||
main_clk.parent = m; \
|
||||
SH_CLK_SET_RATIO(&pll1_clk_ratio, p1 / 2, 1); \
|
||||
if (mode & MD(19)) \
|
||||
SH_CLK_SET_RATIO(&pll3_clk_ratio, p31, 1); \
|
||||
else \
|
||||
SH_CLK_SET_RATIO(&pll3_clk_ratio, p30, 1)
|
||||
|
||||
|
||||
void __init r8a7791_clock_init(void)
|
||||
{
|
||||
void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
|
||||
u32 mode;
|
||||
int k, ret = 0;
|
||||
|
||||
BUG_ON(!modemr);
|
||||
mode = ioread32(modemr);
|
||||
iounmap(modemr);
|
||||
|
||||
switch (mode & (MD(14) | MD(13))) {
|
||||
case 0:
|
||||
R8A7791_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88);
|
||||
break;
|
||||
case MD(13):
|
||||
R8A7791_CLOCK_ROOT(20, &extal_clk, 130, 156, 80, 66);
|
||||
break;
|
||||
case MD(14):
|
||||
R8A7791_CLOCK_ROOT(26, &extal_div2_clk, 200, 240, 122, 102);
|
||||
break;
|
||||
case MD(13) | MD(14):
|
||||
R8A7791_CLOCK_ROOT(30, &extal_div2_clk, 172, 208, 106, 88);
|
||||
break;
|
||||
}
|
||||
|
||||
for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
|
||||
ret = clk_register(main_clks[k]);
|
||||
|
||||
if (!ret)
|
||||
ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
|
||||
|
||||
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
|
||||
|
||||
if (!ret)
|
||||
shmobile_clk_init();
|
||||
else
|
||||
goto epanic;
|
||||
|
||||
return;
|
||||
|
||||
epanic:
|
||||
panic("failed to setup r8a7791 clocks\n");
|
||||
}
|
||||
|
|
@ -0,0 +1,6 @@
|
|||
#ifndef __ASM_R8A7791_H__
|
||||
#define __ASM_R8A7791_H__
|
||||
|
||||
void r8a7791_clock_init(void);
|
||||
|
||||
#endif /* __ASM_R8A7791_H__ */
|
||||
|
|
@ -0,0 +1,38 @@
|
|||
/*
|
||||
* r8a7791 processor support
|
||||
*
|
||||
* Copyright (C) 2013 Renesas Electronics Corporation
|
||||
* Copyright (C) 2013 Renesas Solutions Corp.
|
||||
* Copyright (C) 2013 Magnus Damm
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include <linux/irq.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <mach/common.h>
|
||||
#include <mach/r8a7791.h>
|
||||
#include <asm/mach/arch.h>
|
||||
|
||||
#ifdef CONFIG_USE_OF
|
||||
static const char *r8a7791_boards_compat_dt[] __initdata = {
|
||||
"renesas,r8a7791",
|
||||
NULL,
|
||||
};
|
||||
|
||||
DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)")
|
||||
.dt_compat = r8a7791_boards_compat_dt,
|
||||
MACHINE_END
|
||||
#endif /* CONFIG_USE_OF */
|
||||
Loading…
Reference in New Issue