ALSA: usb-audio: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc. As there are too deep indirections (e.g. ep->chip->dev->dev), a few new local macros, usb_audio_err() & co, are introduced. Also, the device numbers in some messages are dropped, as they are shown in the prefix automatically. Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
parent
6436bcf6a4
commit
0ba41d917e
|
@ -139,8 +139,8 @@ static int snd_usb_create_stream(struct snd_usb_audio *chip, int ctrlif, int int
|
|||
struct usb_interface *iface = usb_ifnum_to_if(dev, interface);
|
||||
|
||||
if (!iface) {
|
||||
snd_printk(KERN_ERR "%d:%u:%d : does not exist\n",
|
||||
dev->devnum, ctrlif, interface);
|
||||
dev_err(&dev->dev, "%u:%d : does not exist\n",
|
||||
ctrlif, interface);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
@ -165,8 +165,8 @@ static int snd_usb_create_stream(struct snd_usb_audio *chip, int ctrlif, int int
|
|||
}
|
||||
|
||||
if (usb_interface_claimed(iface)) {
|
||||
snd_printdd(KERN_INFO "%d:%d:%d: skipping, already claimed\n",
|
||||
dev->devnum, ctrlif, interface);
|
||||
dev_dbg(&dev->dev, "%d:%d: skipping, already claimed\n",
|
||||
ctrlif, interface);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
@ -176,8 +176,9 @@ static int snd_usb_create_stream(struct snd_usb_audio *chip, int ctrlif, int int
|
|||
int err = snd_usbmidi_create(chip->card, iface,
|
||||
&chip->midi_list, NULL);
|
||||
if (err < 0) {
|
||||
snd_printk(KERN_ERR "%d:%u:%d: cannot create sequencer device\n",
|
||||
dev->devnum, ctrlif, interface);
|
||||
dev_err(&dev->dev,
|
||||
"%u:%d: cannot create sequencer device\n",
|
||||
ctrlif, interface);
|
||||
return -EINVAL;
|
||||
}
|
||||
usb_driver_claim_interface(&usb_audio_driver, iface, (void *)-1L);
|
||||
|
@ -188,14 +189,15 @@ static int snd_usb_create_stream(struct snd_usb_audio *chip, int ctrlif, int int
|
|||
if ((altsd->bInterfaceClass != USB_CLASS_AUDIO &&
|
||||
altsd->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
|
||||
altsd->bInterfaceSubClass != USB_SUBCLASS_AUDIOSTREAMING) {
|
||||
snd_printdd(KERN_ERR "%d:%u:%d: skipping non-supported interface %d\n",
|
||||
dev->devnum, ctrlif, interface, altsd->bInterfaceClass);
|
||||
dev_dbg(&dev->dev,
|
||||
"%u:%d: skipping non-supported interface %d\n",
|
||||
ctrlif, interface, altsd->bInterfaceClass);
|
||||
/* skip non-supported classes */
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (snd_usb_get_speed(dev) == USB_SPEED_LOW) {
|
||||
snd_printk(KERN_ERR "low speed audio streaming not supported\n");
|
||||
dev_err(&dev->dev, "low speed audio streaming not supported\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
@ -228,26 +230,27 @@ static int snd_usb_create_streams(struct snd_usb_audio *chip, int ctrlif)
|
|||
protocol = altsd->bInterfaceProtocol;
|
||||
|
||||
if (!control_header) {
|
||||
snd_printk(KERN_ERR "cannot find UAC_HEADER\n");
|
||||
dev_err(&dev->dev, "cannot find UAC_HEADER\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
switch (protocol) {
|
||||
default:
|
||||
snd_printdd(KERN_WARNING "unknown interface protocol %#02x, assuming v1\n",
|
||||
protocol);
|
||||
dev_warn(&dev->dev,
|
||||
"unknown interface protocol %#02x, assuming v1\n",
|
||||
protocol);
|
||||
/* fall through */
|
||||
|
||||
case UAC_VERSION_1: {
|
||||
struct uac1_ac_header_descriptor *h1 = control_header;
|
||||
|
||||
if (!h1->bInCollection) {
|
||||
snd_printk(KERN_INFO "skipping empty audio interface (v1)\n");
|
||||
dev_info(&dev->dev, "skipping empty audio interface (v1)\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (h1->bLength < sizeof(*h1) + h1->bInCollection) {
|
||||
snd_printk(KERN_ERR "invalid UAC_HEADER (v1)\n");
|
||||
dev_err(&dev->dev, "invalid UAC_HEADER (v1)\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
@ -277,7 +280,7 @@ static int snd_usb_create_streams(struct snd_usb_audio *chip, int ctrlif)
|
|||
}
|
||||
|
||||
if (!assoc) {
|
||||
snd_printk(KERN_ERR "Audio class v2 interfaces need an interface association\n");
|
||||
dev_err(&dev->dev, "Audio class v2 interfaces need an interface association\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
@ -351,14 +354,14 @@ static int snd_usb_audio_create(struct usb_interface *intf,
|
|||
case USB_SPEED_SUPER:
|
||||
break;
|
||||
default:
|
||||
snd_printk(KERN_ERR "unknown device speed %d\n", snd_usb_get_speed(dev));
|
||||
dev_err(&dev->dev, "unknown device speed %d\n", snd_usb_get_speed(dev));
|
||||
return -ENXIO;
|
||||
}
|
||||
|
||||
err = snd_card_new(&intf->dev, index[idx], id[idx], THIS_MODULE,
|
||||
0, &card);
|
||||
if (err < 0) {
|
||||
snd_printk(KERN_ERR "cannot create card instance %d\n", idx);
|
||||
dev_err(&dev->dev, "cannot create card instance %d\n", idx);
|
||||
return err;
|
||||
}
|
||||
|
||||
|
@ -499,7 +502,7 @@ snd_usb_audio_probe(struct usb_device *dev,
|
|||
for (i = 0; i < SNDRV_CARDS; i++) {
|
||||
if (usb_chip[i] && usb_chip[i]->dev == dev) {
|
||||
if (usb_chip[i]->shutdown) {
|
||||
snd_printk(KERN_ERR "USB device is in the shutdown state, cannot create a card instance\n");
|
||||
dev_err(&dev->dev, "USB device is in the shutdown state, cannot create a card instance\n");
|
||||
goto __error;
|
||||
}
|
||||
chip = usb_chip[i];
|
||||
|
@ -523,7 +526,7 @@ snd_usb_audio_probe(struct usb_device *dev,
|
|||
break;
|
||||
}
|
||||
if (!chip) {
|
||||
printk(KERN_ERR "no available usb audio device\n");
|
||||
dev_err(&dev->dev, "no available usb audio device\n");
|
||||
goto __error;
|
||||
}
|
||||
}
|
||||
|
|
|
@ -115,9 +115,9 @@ static int uac_clock_selector_set_val(struct snd_usb_audio *chip, int selector_i
|
|||
return ret;
|
||||
|
||||
if (ret != sizeof(pin)) {
|
||||
snd_printk(KERN_ERR
|
||||
"usb-audio:%d: setting selector (id %d) unexpected length %d\n",
|
||||
chip->dev->devnum, selector_id, ret);
|
||||
usb_audio_err(chip,
|
||||
"setting selector (id %d) unexpected length %d\n",
|
||||
selector_id, ret);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
@ -126,9 +126,9 @@ static int uac_clock_selector_set_val(struct snd_usb_audio *chip, int selector_i
|
|||
return ret;
|
||||
|
||||
if (ret != pin) {
|
||||
snd_printk(KERN_ERR
|
||||
"usb-audio:%d: setting selector (id %d) to %x failed (current: %d)\n",
|
||||
chip->dev->devnum, selector_id, pin, ret);
|
||||
usb_audio_err(chip,
|
||||
"setting selector (id %d) to %x failed (current: %d)\n",
|
||||
selector_id, pin, ret);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
@ -158,7 +158,8 @@ static bool uac_clock_source_is_valid(struct snd_usb_audio *chip, int source_id)
|
|||
&data, sizeof(data));
|
||||
|
||||
if (err < 0) {
|
||||
snd_printk(KERN_WARNING "%s(): cannot get clock validity for id %d\n",
|
||||
dev_warn(&dev->dev,
|
||||
"%s(): cannot get clock validity for id %d\n",
|
||||
__func__, source_id);
|
||||
return 0;
|
||||
}
|
||||
|
@ -177,9 +178,9 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,
|
|||
entity_id &= 0xff;
|
||||
|
||||
if (test_and_set_bit(entity_id, visited)) {
|
||||
snd_printk(KERN_WARNING
|
||||
"%s(): recursive clock topology detected, id %d.\n",
|
||||
__func__, entity_id);
|
||||
usb_audio_warn(chip,
|
||||
"%s(): recursive clock topology detected, id %d.\n",
|
||||
__func__, entity_id);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
@ -188,8 +189,9 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,
|
|||
if (source) {
|
||||
entity_id = source->bClockID;
|
||||
if (validate && !uac_clock_source_is_valid(chip, entity_id)) {
|
||||
snd_printk(KERN_ERR "usb-audio:%d: clock source %d is not valid, cannot use\n",
|
||||
chip->dev->devnum, entity_id);
|
||||
usb_audio_err(chip,
|
||||
"clock source %d is not valid, cannot use\n",
|
||||
entity_id);
|
||||
return -ENXIO;
|
||||
}
|
||||
return entity_id;
|
||||
|
@ -208,7 +210,7 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,
|
|||
/* Selector values are one-based */
|
||||
|
||||
if (ret > selector->bNrInPins || ret < 1) {
|
||||
snd_printk(KERN_ERR
|
||||
usb_audio_err(chip,
|
||||
"%s(): selector reported illegal value, id %d, ret %d\n",
|
||||
__func__, selector->bClockID, ret);
|
||||
|
||||
|
@ -237,9 +239,9 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,
|
|||
if (err < 0)
|
||||
continue;
|
||||
|
||||
snd_printk(KERN_INFO
|
||||
"usb-audio:%d: found and selected valid clock source %d\n",
|
||||
chip->dev->devnum, ret);
|
||||
usb_audio_info(chip,
|
||||
"found and selected valid clock source %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
@ -296,8 +298,8 @@ static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
|
|||
USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_OUT,
|
||||
UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
|
||||
data, sizeof(data))) < 0) {
|
||||
snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d to ep %#x\n",
|
||||
dev->devnum, iface, fmt->altsetting, rate, ep);
|
||||
dev_err(&dev->dev, "%d:%d: cannot set freq %d to ep %#x\n",
|
||||
iface, fmt->altsetting, rate, ep);
|
||||
return err;
|
||||
}
|
||||
|
||||
|
@ -305,14 +307,14 @@ static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
|
|||
USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_IN,
|
||||
UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
|
||||
data, sizeof(data))) < 0) {
|
||||
snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq at ep %#x\n",
|
||||
dev->devnum, iface, fmt->altsetting, ep);
|
||||
dev_err(&dev->dev, "%d:%d: cannot get freq at ep %#x\n",
|
||||
iface, fmt->altsetting, ep);
|
||||
return 0; /* some devices don't support reading */
|
||||
}
|
||||
|
||||
crate = data[0] | (data[1] << 8) | (data[2] << 16);
|
||||
if (crate != rate) {
|
||||
snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
|
||||
dev_warn(&dev->dev, "current rate %d is different from the runtime rate %d\n", crate, rate);
|
||||
// runtime->rate = crate;
|
||||
}
|
||||
|
||||
|
@ -332,8 +334,8 @@ static int get_sample_rate_v2(struct snd_usb_audio *chip, int iface,
|
|||
snd_usb_ctrl_intf(chip) | (clock << 8),
|
||||
&data, sizeof(data));
|
||||
if (err < 0) {
|
||||
snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2): err %d\n",
|
||||
dev->devnum, iface, altsetting, err);
|
||||
dev_warn(&dev->dev, "%d:%d: cannot get freq (v2): err %d\n",
|
||||
iface, altsetting, err);
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -369,8 +371,9 @@ static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
|
|||
snd_usb_ctrl_intf(chip) | (clock << 8),
|
||||
&data, sizeof(data));
|
||||
if (err < 0) {
|
||||
snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d (v2): err %d\n",
|
||||
dev->devnum, iface, fmt->altsetting, rate, err);
|
||||
usb_audio_err(chip,
|
||||
"%d:%d: cannot set freq %d (v2): err %d\n",
|
||||
iface, fmt->altsetting, rate, err);
|
||||
return err;
|
||||
}
|
||||
|
||||
|
@ -381,14 +384,14 @@ static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
|
|||
|
||||
if (cur_rate != rate) {
|
||||
if (!writeable) {
|
||||
snd_printk(KERN_WARNING
|
||||
"%d:%d:%d: freq mismatch (RO clock): req %d, clock runs @%d\n",
|
||||
dev->devnum, iface, fmt->altsetting, rate, cur_rate);
|
||||
usb_audio_warn(chip,
|
||||
"%d:%d: freq mismatch (RO clock): req %d, clock runs @%d\n",
|
||||
iface, fmt->altsetting, rate, cur_rate);
|
||||
return -ENXIO;
|
||||
}
|
||||
snd_printd(KERN_WARNING
|
||||
"current rate %d is different from the runtime rate %d\n",
|
||||
cur_rate, rate);
|
||||
usb_audio_dbg(chip,
|
||||
"current rate %d is different from the runtime rate %d\n",
|
||||
cur_rate, rate);
|
||||
}
|
||||
|
||||
/* Some devices doesn't respond to sample rate changes while the
|
||||
|
|
|
@ -333,8 +333,9 @@ static void queue_pending_output_urbs(struct snd_usb_endpoint *ep)
|
|||
|
||||
err = usb_submit_urb(ctx->urb, GFP_ATOMIC);
|
||||
if (err < 0)
|
||||
snd_printk(KERN_ERR "Unable to submit urb #%d: %d (urb %p)\n",
|
||||
ctx->index, err, ctx->urb);
|
||||
usb_audio_err(ep->chip,
|
||||
"Unable to submit urb #%d: %d (urb %p)\n",
|
||||
ctx->index, err, ctx->urb);
|
||||
else
|
||||
set_bit(ctx->index, &ep->active_mask);
|
||||
}
|
||||
|
@ -387,7 +388,7 @@ static void snd_complete_urb(struct urb *urb)
|
|||
if (err == 0)
|
||||
return;
|
||||
|
||||
snd_printk(KERN_ERR "cannot submit urb (err = %d)\n", err);
|
||||
usb_audio_err(ep->chip, "cannot submit urb (err = %d)\n", err);
|
||||
//snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
|
||||
|
||||
exit_clear:
|
||||
|
@ -426,13 +427,14 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip,
|
|||
if (ep->ep_num == ep_num &&
|
||||
ep->iface == alts->desc.bInterfaceNumber &&
|
||||
ep->altsetting == alts->desc.bAlternateSetting) {
|
||||
snd_printdd(KERN_DEBUG "Re-using EP %x in iface %d,%d @%p\n",
|
||||
usb_audio_dbg(ep->chip,
|
||||
"Re-using EP %x in iface %d,%d @%p\n",
|
||||
ep_num, ep->iface, ep->altsetting, ep);
|
||||
goto __exit_unlock;
|
||||
}
|
||||
}
|
||||
|
||||
snd_printdd(KERN_DEBUG "Creating new %s %s endpoint #%x\n",
|
||||
usb_audio_dbg(chip, "Creating new %s %s endpoint #%x\n",
|
||||
is_playback ? "playback" : "capture",
|
||||
type == SND_USB_ENDPOINT_TYPE_DATA ? "data" : "sync",
|
||||
ep_num);
|
||||
|
@ -496,8 +498,9 @@ static int wait_clear_urbs(struct snd_usb_endpoint *ep)
|
|||
} while (time_before(jiffies, end_time));
|
||||
|
||||
if (alive)
|
||||
snd_printk(KERN_ERR "timeout: still %d active urbs on EP #%x\n",
|
||||
alive, ep->ep_num);
|
||||
usb_audio_err(ep->chip,
|
||||
"timeout: still %d active urbs on EP #%x\n",
|
||||
alive, ep->ep_num);
|
||||
clear_bit(EP_FLAG_STOPPING, &ep->flags);
|
||||
|
||||
return 0;
|
||||
|
@ -794,8 +797,9 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
|
|||
int err;
|
||||
|
||||
if (ep->use_count != 0) {
|
||||
snd_printk(KERN_WARNING "Unable to change format on ep #%x: already in use\n",
|
||||
ep->ep_num);
|
||||
usb_audio_warn(ep->chip,
|
||||
"Unable to change format on ep #%x: already in use\n",
|
||||
ep->ep_num);
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
|
@ -830,8 +834,9 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
|
|||
err = -EINVAL;
|
||||
}
|
||||
|
||||
snd_printdd(KERN_DEBUG "Setting params for ep #%x (type %d, %d urbs), ret=%d\n",
|
||||
ep->ep_num, ep->type, ep->nurbs, err);
|
||||
usb_audio_dbg(ep->chip,
|
||||
"Setting params for ep #%x (type %d, %d urbs), ret=%d\n",
|
||||
ep->ep_num, ep->type, ep->nurbs, err);
|
||||
|
||||
return err;
|
||||
}
|
||||
|
@ -906,8 +911,9 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep, bool can_sleep)
|
|||
|
||||
err = usb_submit_urb(urb, GFP_ATOMIC);
|
||||
if (err < 0) {
|
||||
snd_printk(KERN_ERR "cannot submit urb %d, error %d: %s\n",
|
||||
i, err, usb_error_string(err));
|
||||
usb_audio_err(ep->chip,
|
||||
"cannot submit urb %d, error %d: %s\n",
|
||||
i, err, usb_error_string(err));
|
||||
goto __error;
|
||||
}
|
||||
set_bit(i, &ep->active_mask);
|
||||
|
|
|
@ -74,8 +74,8 @@ static u64 parse_audio_format_i_type(struct snd_usb_audio *chip,
|
|||
if ((pcm_formats == 0) &&
|
||||
(format == 0 || format == (1 << UAC_FORMAT_TYPE_I_UNDEFINED))) {
|
||||
/* some devices don't define this correctly... */
|
||||
snd_printdd(KERN_INFO "%d:%u:%d : format type 0 is detected, processed as PCM\n",
|
||||
chip->dev->devnum, fp->iface, fp->altsetting);
|
||||
usb_audio_info(chip, "%u:%d : format type 0 is detected, processed as PCM\n",
|
||||
fp->iface, fp->altsetting);
|
||||
format = 1 << UAC_FORMAT_TYPE_I_PCM;
|
||||
}
|
||||
if (format & (1 << UAC_FORMAT_TYPE_I_PCM)) {
|
||||
|
@ -83,9 +83,9 @@ static u64 parse_audio_format_i_type(struct snd_usb_audio *chip,
|
|||
sample_width == 24 && sample_bytes == 2)
|
||||
sample_bytes = 3;
|
||||
else if (sample_width > sample_bytes * 8) {
|
||||
snd_printk(KERN_INFO "%d:%u:%d : sample bitwidth %d in over sample bytes %d\n",
|
||||
chip->dev->devnum, fp->iface, fp->altsetting,
|
||||
sample_width, sample_bytes);
|
||||
usb_audio_info(chip, "%u:%d : sample bitwidth %d in over sample bytes %d\n",
|
||||
fp->iface, fp->altsetting,
|
||||
sample_width, sample_bytes);
|
||||
}
|
||||
/* check the format byte size */
|
||||
switch (sample_bytes) {
|
||||
|
@ -108,9 +108,10 @@ static u64 parse_audio_format_i_type(struct snd_usb_audio *chip,
|
|||
pcm_formats |= SNDRV_PCM_FMTBIT_S32_LE;
|
||||
break;
|
||||
default:
|
||||
snd_printk(KERN_INFO "%d:%u:%d : unsupported sample bitwidth %d in %d bytes\n",
|
||||
chip->dev->devnum, fp->iface, fp->altsetting,
|
||||
sample_width, sample_bytes);
|
||||
usb_audio_info(chip,
|
||||
"%u:%d : unsupported sample bitwidth %d in %d bytes\n",
|
||||
fp->iface, fp->altsetting,
|
||||
sample_width, sample_bytes);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
@ -132,8 +133,9 @@ static u64 parse_audio_format_i_type(struct snd_usb_audio *chip,
|
|||
pcm_formats |= SNDRV_PCM_FMTBIT_MU_LAW;
|
||||
}
|
||||
if (format & ~0x3f) {
|
||||
snd_printk(KERN_INFO "%d:%u:%d : unsupported format bits %#x\n",
|
||||
chip->dev->devnum, fp->iface, fp->altsetting, format);
|
||||
usb_audio_info(chip,
|
||||
"%u:%d : unsupported format bits %#x\n",
|
||||
fp->iface, fp->altsetting, format);
|
||||
}
|
||||
|
||||
pcm_formats |= snd_usb_interface_dsd_format_quirks(chip, fp, sample_bytes);
|
||||
|
@ -158,8 +160,9 @@ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audiof
|
|||
int nr_rates = fmt[offset];
|
||||
|
||||
if (fmt[0] < offset + 1 + 3 * (nr_rates ? nr_rates : 2)) {
|
||||
snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_FORMAT_TYPE desc\n",
|
||||
chip->dev->devnum, fp->iface, fp->altsetting);
|
||||
usb_audio_err(chip,
|
||||
"%u:%d : invalid UAC_FORMAT_TYPE desc\n",
|
||||
fp->iface, fp->altsetting);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
@ -171,7 +174,7 @@ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audiof
|
|||
|
||||
fp->rate_table = kmalloc(sizeof(int) * nr_rates, GFP_KERNEL);
|
||||
if (fp->rate_table == NULL) {
|
||||
snd_printk(KERN_ERR "cannot malloc\n");
|
||||
usb_audio_err(chip, "cannot malloc\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
|
@ -222,7 +225,8 @@ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audiof
|
|||
* get to know how many sample rates we have to expect.
|
||||
* Then fp->rate_table can be allocated and filled.
|
||||
*/
|
||||
static int parse_uac2_sample_rate_range(struct audioformat *fp, int nr_triplets,
|
||||
static int parse_uac2_sample_rate_range(struct snd_usb_audio *chip,
|
||||
struct audioformat *fp, int nr_triplets,
|
||||
const unsigned char *data)
|
||||
{
|
||||
int i, nr_rates = 0;
|
||||
|
@ -261,7 +265,7 @@ static int parse_uac2_sample_rate_range(struct audioformat *fp, int nr_triplets,
|
|||
|
||||
nr_rates++;
|
||||
if (nr_rates >= MAX_NR_RATES) {
|
||||
snd_printk(KERN_ERR "invalid uac2 rates\n");
|
||||
usb_audio_err(chip, "invalid uac2 rates\n");
|
||||
break;
|
||||
}
|
||||
|
||||
|
@ -287,7 +291,8 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip,
|
|||
int clock = snd_usb_clock_find_source(chip, fp->clock, false);
|
||||
|
||||
if (clock < 0) {
|
||||
snd_printk(KERN_ERR "%s(): unable to find clock source (clock %d)\n",
|
||||
dev_err(&dev->dev,
|
||||
"%s(): unable to find clock source (clock %d)\n",
|
||||
__func__, clock);
|
||||
goto err;
|
||||
}
|
||||
|
@ -300,7 +305,8 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip,
|
|||
tmp, sizeof(tmp));
|
||||
|
||||
if (ret < 0) {
|
||||
snd_printk(KERN_ERR "%s(): unable to retrieve number of sample rates (clock %d)\n",
|
||||
dev_err(&dev->dev,
|
||||
"%s(): unable to retrieve number of sample rates (clock %d)\n",
|
||||
__func__, clock);
|
||||
goto err;
|
||||
}
|
||||
|
@ -321,7 +327,8 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip,
|
|||
data, data_size);
|
||||
|
||||
if (ret < 0) {
|
||||
snd_printk(KERN_ERR "%s(): unable to retrieve sample rate range (clock %d)\n",
|
||||
dev_err(&dev->dev,
|
||||
"%s(): unable to retrieve sample rate range (clock %d)\n",
|
||||
__func__, clock);
|
||||
ret = -EINVAL;
|
||||
goto err_free;
|
||||
|
@ -332,7 +339,7 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip,
|
|||
* will have to deal with. */
|
||||
kfree(fp->rate_table);
|
||||
fp->rate_table = NULL;
|
||||
fp->nr_rates = parse_uac2_sample_rate_range(fp, nr_triplets, data);
|
||||
fp->nr_rates = parse_uac2_sample_rate_range(chip, fp, nr_triplets, data);
|
||||
|
||||
if (fp->nr_rates == 0) {
|
||||
/* SNDRV_PCM_RATE_CONTINUOUS */
|
||||
|
@ -348,7 +355,7 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip,
|
|||
|
||||
/* Call the triplet parser again, but this time, fp->rate_table is
|
||||
* allocated, so the rates will be stored */
|
||||
parse_uac2_sample_rate_range(fp, nr_triplets, data);
|
||||
parse_uac2_sample_rate_range(chip, fp, nr_triplets, data);
|
||||
|
||||
err_free:
|
||||
kfree(data);
|
||||
|
@ -408,8 +415,9 @@ static int parse_audio_format_i(struct snd_usb_audio *chip,
|
|||
}
|
||||
|
||||
if (fp->channels < 1) {
|
||||
snd_printk(KERN_ERR "%d:%u:%d : invalid channels %d\n",
|
||||
chip->dev->devnum, fp->iface, fp->altsetting, fp->channels);
|
||||
usb_audio_err(chip,
|
||||
"%u:%d : invalid channels %d\n",
|
||||
fp->iface, fp->altsetting, fp->channels);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
@ -435,8 +443,9 @@ static int parse_audio_format_ii(struct snd_usb_audio *chip,
|
|||
fp->formats = SNDRV_PCM_FMTBIT_MPEG;
|
||||
break;
|
||||
default:
|
||||
snd_printd(KERN_INFO "%d:%u:%d : unknown format tag %#x is detected. processed as MPEG.\n",
|
||||
chip->dev->devnum, fp->iface, fp->altsetting, format);
|
||||
usb_audio_info(chip,
|
||||
"%u:%d : unknown format tag %#x is detected. processed as MPEG.\n",
|
||||
fp->iface, fp->altsetting, format);
|
||||
fp->formats = SNDRV_PCM_FMTBIT_MPEG;
|
||||
break;
|
||||
}
|
||||
|
@ -449,7 +458,7 @@ static int parse_audio_format_ii(struct snd_usb_audio *chip,
|
|||
struct uac_format_type_ii_discrete_descriptor *fmt = _fmt;
|
||||
brate = le16_to_cpu(fmt->wMaxBitRate);
|
||||
framesize = le16_to_cpu(fmt->wSamplesPerFrame);
|
||||
snd_printd(KERN_INFO "found format II with max.bitrate = %d, frame size=%d\n", brate, framesize);
|
||||
usb_audio_info(chip, "found format II with max.bitrate = %d, frame size=%d\n", brate, framesize);
|
||||
fp->frame_size = framesize;
|
||||
ret = parse_audio_format_rates_v1(chip, fp, _fmt, 8); /* fmt[8..] sample rates */
|
||||
break;
|
||||
|
@ -458,7 +467,7 @@ static int parse_audio_format_ii(struct snd_usb_audio *chip,
|
|||
struct uac_format_type_ii_ext_descriptor *fmt = _fmt;
|
||||
brate = le16_to_cpu(fmt->wMaxBitRate);
|
||||
framesize = le16_to_cpu(fmt->wSamplesPerFrame);
|
||||
snd_printd(KERN_INFO "found format II with max.bitrate = %d, frame size=%d\n", brate, framesize);
|
||||
usb_audio_info(chip, "found format II with max.bitrate = %d, frame size=%d\n", brate, framesize);
|
||||
fp->frame_size = framesize;
|
||||
ret = parse_audio_format_rates_v2(chip, fp);
|
||||
break;
|
||||
|
@ -484,9 +493,10 @@ int snd_usb_parse_audio_format(struct snd_usb_audio *chip,
|
|||
err = parse_audio_format_ii(chip, fp, format, fmt);
|
||||
break;
|
||||
default:
|
||||
snd_printd(KERN_INFO "%d:%u:%d : format type %d is not supported yet\n",
|
||||
chip->dev->devnum, fp->iface, fp->altsetting,
|
||||
fmt->bFormatType);
|
||||
usb_audio_info(chip,
|
||||
"%u:%d : format type %d is not supported yet\n",
|
||||
fp->iface, fp->altsetting,
|
||||
fmt->bFormatType);
|
||||
return -ENOTSUPP;
|
||||
}
|
||||
fp->fmt_type = fmt->bFormatType;
|
||||
|
|
|
@ -191,16 +191,16 @@ static int snd_usbmidi_submit_urb(struct urb* urb, gfp_t flags)
|
|||
{
|
||||
int err = usb_submit_urb(urb, flags);
|
||||
if (err < 0 && err != -ENODEV)
|
||||
snd_printk(KERN_ERR "usb_submit_urb: %d\n", err);
|
||||
dev_err(&urb->dev->dev, "usb_submit_urb: %d\n", err);
|
||||
return err;
|
||||
}
|
||||
|
||||
/*
|
||||
* Error handling for URB completion functions.
|
||||
*/
|
||||
static int snd_usbmidi_urb_error(int status)
|
||||
static int snd_usbmidi_urb_error(const struct urb *urb)
|
||||
{
|
||||
switch (status) {
|
||||
switch (urb->status) {
|
||||
/* manually unlinked, or device gone */
|
||||
case -ENOENT:
|
||||
case -ECONNRESET:
|
||||
|
@ -213,7 +213,7 @@ static int snd_usbmidi_urb_error(int status)
|
|||
case -EILSEQ:
|
||||
return -EIO;
|
||||
default:
|
||||
snd_printk(KERN_ERR "urb status %d\n", status);
|
||||
dev_err(&urb->dev->dev, "urb status %d\n", urb->status);
|
||||
return 0; /* continue */
|
||||
}
|
||||
}
|
||||
|
@ -227,7 +227,7 @@ static void snd_usbmidi_input_data(struct snd_usb_midi_in_endpoint* ep, int port
|
|||
struct usbmidi_in_port* port = &ep->ports[portidx];
|
||||
|
||||
if (!port->substream) {
|
||||
snd_printd("unexpected port %d!\n", portidx);
|
||||
dev_dbg(&ep->umidi->dev->dev, "unexpected port %d!\n", portidx);
|
||||
return;
|
||||
}
|
||||
if (!test_bit(port->substream->number, &ep->umidi->input_triggered))
|
||||
|
@ -259,7 +259,7 @@ static void snd_usbmidi_in_urb_complete(struct urb* urb)
|
|||
ep->umidi->usb_protocol_ops->input(ep, urb->transfer_buffer,
|
||||
urb->actual_length);
|
||||
} else {
|
||||
int err = snd_usbmidi_urb_error(urb->status);
|
||||
int err = snd_usbmidi_urb_error(urb);
|
||||
if (err < 0) {
|
||||
if (err != -ENODEV) {
|
||||
ep->error_resubmit = 1;
|
||||
|
@ -289,7 +289,7 @@ static void snd_usbmidi_out_urb_complete(struct urb* urb)
|
|||
}
|
||||
spin_unlock(&ep->buffer_lock);
|
||||
if (urb->status < 0) {
|
||||
int err = snd_usbmidi_urb_error(urb->status);
|
||||
int err = snd_usbmidi_urb_error(urb);
|
||||
if (err < 0) {
|
||||
if (err != -ENODEV)
|
||||
mod_timer(&ep->umidi->error_timer,
|
||||
|
@ -1668,7 +1668,7 @@ static void snd_usbmidi_init_substream(struct snd_usb_midi* umidi,
|
|||
|
||||
struct snd_rawmidi_substream *substream = snd_usbmidi_find_substream(umidi, stream, number);
|
||||
if (!substream) {
|
||||
snd_printd(KERN_ERR "substream %d:%d not found\n", stream, number);
|
||||
dev_err(&umidi->dev->dev, "substream %d:%d not found\n", stream, number);
|
||||
return;
|
||||
}
|
||||
|
||||
|
@ -1717,7 +1717,7 @@ static int snd_usbmidi_create_endpoints(struct snd_usb_midi* umidi,
|
|||
}
|
||||
}
|
||||
}
|
||||
snd_printdd(KERN_INFO "created %d output and %d input ports\n",
|
||||
dev_dbg(&umidi->dev->dev, "created %d output and %d input ports\n",
|
||||
out_ports, in_ports);
|
||||
return 0;
|
||||
}
|
||||
|
@ -1747,10 +1747,11 @@ static int snd_usbmidi_get_ms_info(struct snd_usb_midi* umidi,
|
|||
ms_header->bLength >= 7 &&
|
||||
ms_header->bDescriptorType == USB_DT_CS_INTERFACE &&
|
||||
ms_header->bDescriptorSubtype == UAC_HEADER)
|
||||
snd_printdd(KERN_INFO "MIDIStreaming version %02x.%02x\n",
|
||||
dev_dbg(&umidi->dev->dev, "MIDIStreaming version %02x.%02x\n",
|
||||
ms_header->bcdMSC[1], ms_header->bcdMSC[0]);
|
||||
else
|
||||
snd_printk(KERN_WARNING "MIDIStreaming interface descriptor not found\n");
|
||||
dev_warn(&umidi->dev->dev,
|
||||
"MIDIStreaming interface descriptor not found\n");
|
||||
|
||||
epidx = 0;
|
||||
for (i = 0; i < intfd->bNumEndpoints; ++i) {
|
||||
|
@ -1767,7 +1768,8 @@ static int snd_usbmidi_get_ms_info(struct snd_usb_midi* umidi,
|
|||
if (usb_endpoint_dir_out(ep)) {
|
||||
if (endpoints[epidx].out_ep) {
|
||||
if (++epidx >= MIDI_MAX_ENDPOINTS) {
|
||||
snd_printk(KERN_WARNING "too many endpoints\n");
|
||||
dev_warn(&umidi->dev->dev,
|
||||
"too many endpoints\n");
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
@ -1782,12 +1784,13 @@ static int snd_usbmidi_get_ms_info(struct snd_usb_midi* umidi,
|
|||
*/
|
||||
endpoints[epidx].out_interval = 1;
|
||||
endpoints[epidx].out_cables = (1 << ms_ep->bNumEmbMIDIJack) - 1;
|
||||
snd_printdd(KERN_INFO "EP %02X: %d jack(s)\n",
|
||||
dev_dbg(&umidi->dev->dev, "EP %02X: %d jack(s)\n",
|
||||
ep->bEndpointAddress, ms_ep->bNumEmbMIDIJack);
|
||||
} else {
|
||||
if (endpoints[epidx].in_ep) {
|
||||
if (++epidx >= MIDI_MAX_ENDPOINTS) {
|
||||
snd_printk(KERN_WARNING "too many endpoints\n");
|
||||
dev_warn(&umidi->dev->dev,
|
||||
"too many endpoints\n");
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
@ -1797,7 +1800,7 @@ static int snd_usbmidi_get_ms_info(struct snd_usb_midi* umidi,
|
|||
else if (snd_usb_get_speed(umidi->dev) == USB_SPEED_LOW)
|
||||
endpoints[epidx].in_interval = 1;
|
||||
endpoints[epidx].in_cables = (1 << ms_ep->bNumEmbMIDIJack) - 1;
|
||||
snd_printdd(KERN_INFO "EP %02X: %d jack(s)\n",
|
||||
dev_dbg(&umidi->dev->dev, "EP %02X: %d jack(s)\n",
|
||||
ep->bEndpointAddress, ms_ep->bNumEmbMIDIJack);
|
||||
}
|
||||
}
|
||||
|
@ -1865,7 +1868,7 @@ static void snd_usbmidi_switch_roland_altsetting(struct snd_usb_midi* umidi)
|
|||
(get_endpoint(hostif, 1)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT)
|
||||
return;
|
||||
|
||||
snd_printdd(KERN_INFO "switching to altsetting %d with int ep\n",
|
||||
dev_dbg(&umidi->dev->dev, "switching to altsetting %d with int ep\n",
|
||||
intfd->bAlternateSetting);
|
||||
usb_set_interface(umidi->dev, intfd->bInterfaceNumber,
|
||||
intfd->bAlternateSetting);
|
||||
|
@ -2047,25 +2050,25 @@ static int snd_usbmidi_create_endpoints_midiman(struct snd_usb_midi* umidi,
|
|||
* input bulk endpoints (at indices 1 and 3) which aren't used.
|
||||
*/
|
||||
if (intfd->bNumEndpoints < (endpoint->out_cables > 0x0001 ? 5 : 3)) {
|
||||
snd_printdd(KERN_ERR "not enough endpoints\n");
|
||||
dev_dbg(&umidi->dev->dev, "not enough endpoints\n");
|
||||
return -ENOENT;
|
||||
}
|
||||
|
||||
epd = get_endpoint(hostif, 0);
|
||||
if (!usb_endpoint_dir_in(epd) || !usb_endpoint_xfer_int(epd)) {
|
||||
snd_printdd(KERN_ERR "endpoint[0] isn't interrupt\n");
|
||||
dev_dbg(&umidi->dev->dev, "endpoint[0] isn't interrupt\n");
|
||||
return -ENXIO;
|
||||
}
|
||||
epd = get_endpoint(hostif, 2);
|
||||
if (!usb_endpoint_dir_out(epd) || !usb_endpoint_xfer_bulk(epd)) {
|
||||
snd_printdd(KERN_ERR "endpoint[2] isn't bulk output\n");
|
||||
dev_dbg(&umidi->dev->dev, "endpoint[2] isn't bulk output\n");
|
||||
return -ENXIO;
|
||||
}
|
||||
if (endpoint->out_cables > 0x0001) {
|
||||
epd = get_endpoint(hostif, 4);
|
||||
if (!usb_endpoint_dir_out(epd) ||
|
||||
!usb_endpoint_xfer_bulk(epd)) {
|
||||
snd_printdd(KERN_ERR "endpoint[4] isn't bulk output\n");
|
||||
dev_dbg(&umidi->dev->dev, "endpoint[4] isn't bulk output\n");
|
||||
return -ENXIO;
|
||||
}
|
||||
}
|
||||
|
@ -2289,7 +2292,7 @@ int snd_usbmidi_create(struct snd_card *card,
|
|||
err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
|
||||
break;
|
||||
default:
|
||||
snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type);
|
||||
dev_err(&umidi->dev->dev, "invalid quirk type %d\n", quirk->type);
|
||||
err = -ENXIO;
|
||||
break;
|
||||
}
|
||||
|
|
|
@ -305,8 +305,9 @@ static int get_ctl_value_v1(struct usb_mixer_elem_info *cval, int request, int v
|
|||
goto out;
|
||||
}
|
||||
}
|
||||
snd_printdd(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
|
||||
request, validx, idx, cval->val_type);
|
||||
usb_audio_dbg(chip,
|
||||
"cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
|
||||
request, validx, idx, cval->val_type);
|
||||
err = -EINVAL;
|
||||
|
||||
out:
|
||||
|
@ -351,8 +352,9 @@ static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int v
|
|||
|
||||
if (ret < 0) {
|
||||
error:
|
||||
snd_printk(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
|
||||
request, validx, idx, cval->val_type);
|
||||
usb_audio_err(chip,
|
||||
"cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
|
||||
request, validx, idx, cval->val_type);
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
@ -413,7 +415,8 @@ static int get_cur_mix_value(struct usb_mixer_elem_info *cval,
|
|||
err = get_cur_mix_raw(cval, channel, value);
|
||||
if (err < 0) {
|
||||
if (!cval->mixer->ignore_ctl_error)
|
||||
snd_printd(KERN_ERR "cannot get current value for control %d ch %d: err = %d\n",
|
||||
usb_audio_dbg(cval->mixer->chip,
|
||||
"cannot get current value for control %d ch %d: err = %d\n",
|
||||
cval->control, channel, err);
|
||||
return err;
|
||||
}
|
||||
|
@ -444,7 +447,7 @@ int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval,
|
|||
|
||||
/* FIXME */
|
||||
if (request != UAC_SET_CUR) {
|
||||
snd_printdd(KERN_WARNING "RANGE setting not yet supported\n");
|
||||
usb_audio_dbg(chip, "RANGE setting not yet supported\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
@ -470,7 +473,7 @@ int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval,
|
|||
goto out;
|
||||
}
|
||||
}
|
||||
snd_printdd(KERN_ERR "cannot set ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d, data = %#x/%#x\n",
|
||||
usb_audio_dbg(chip, "cannot set ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d, data = %#x/%#x\n",
|
||||
request, validx, idx, cval->val_type, buf[0], buf[1]);
|
||||
err = -EINVAL;
|
||||
|
||||
|
@ -494,7 +497,8 @@ static int set_cur_mix_value(struct usb_mixer_elem_info *cval, int channel,
|
|||
cval->ch_readonly & (1 << (channel - 1));
|
||||
|
||||
if (read_only) {
|
||||
snd_printdd(KERN_INFO "%s(): channel %d of control %d is read_only\n",
|
||||
usb_audio_dbg(cval->mixer->chip,
|
||||
"%s(): channel %d of control %d is read_only\n",
|
||||
__func__, channel, cval->control);
|
||||
return 0;
|
||||
}
|
||||
|
@ -560,7 +564,7 @@ int snd_usb_mixer_add_control(struct usb_mixer_interface *mixer,
|
|||
while (snd_ctl_find_id(mixer->chip->card, &kctl->id))
|
||||
kctl->id.index++;
|
||||
if ((err = snd_ctl_add(mixer->chip->card, kctl)) < 0) {
|
||||
snd_printd(KERN_ERR "cannot add control (err = %d)\n", err);
|
||||
usb_audio_dbg(mixer->chip, "cannot add control (err = %d)\n", err);
|
||||
return err;
|
||||
}
|
||||
cval->elem_id = &kctl->id;
|
||||
|
@ -807,7 +811,8 @@ static void usb_mixer_elem_free(struct snd_kcontrol *kctl)
|
|||
static void volume_control_quirks(struct usb_mixer_elem_info *cval,
|
||||
struct snd_kcontrol *kctl)
|
||||
{
|
||||
switch (cval->mixer->chip->usb_id) {
|
||||
struct snd_usb_audio *chip = cval->mixer->chip;
|
||||
switch (chip->usb_id) {
|
||||
case USB_ID(0x0763, 0x2030): /* M-Audio Fast Track C400 */
|
||||
case USB_ID(0x0763, 0x2031): /* M-Audio Fast Track C600 */
|
||||
if (strcmp(kctl->id.name, "Effect Duration") == 0) {
|
||||
|
@ -839,8 +844,8 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval,
|
|||
case USB_ID(0x0763, 0x2081): /* M-Audio Fast Track Ultra 8R */
|
||||
case USB_ID(0x0763, 0x2080): /* M-Audio Fast Track Ultra */
|
||||
if (strcmp(kctl->id.name, "Effect Duration") == 0) {
|
||||
snd_printk(KERN_INFO
|
||||
"usb-audio: set quirk for FTU Effect Duration\n");
|
||||
usb_audio_info(chip,
|
||||
"set quirk for FTU Effect Duration\n");
|
||||
cval->min = 0x0000;
|
||||
cval->max = 0x7f00;
|
||||
cval->res = 0x0100;
|
||||
|
@ -848,8 +853,8 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval,
|
|||
}
|
||||
if (strcmp(kctl->id.name, "Effect Volume") == 0 ||
|
||||
strcmp(kctl->id.name, "Effect Feedback Volume") == 0) {
|
||||
snd_printk(KERN_INFO
|
||||
"usb-audio: set quirks for FTU Effect Feedback/Volume\n");
|
||||
usb_audio_info(chip,
|
||||
"set quirks for FTU Effect Feedback/Volume\n");
|
||||
cval->min = 0x00;
|
||||
cval->max = 0x7f;
|
||||
break;
|
||||
|
@ -867,7 +872,7 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval,
|
|||
*/
|
||||
if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
|
||||
cval->min == -15616) {
|
||||
snd_printk(KERN_INFO
|
||||
usb_audio_info(chip,
|
||||
"set volume quirk for UDA1321/N101 chip\n");
|
||||
cval->max = -256;
|
||||
}
|
||||
|
@ -875,7 +880,7 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval,
|
|||
|
||||
case USB_ID(0x046d, 0x09a4):
|
||||
if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
|
||||
snd_printk(KERN_INFO
|
||||
usb_audio_info(chip,
|
||||
"set volume quirk for QuickCam E3500\n");
|
||||
cval->min = 6080;
|
||||
cval->max = 8768;
|
||||
|
@ -895,7 +900,7 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval,
|
|||
* Proboly there is some logitech magic behind this number --fishor
|
||||
*/
|
||||
if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
|
||||
snd_printk(KERN_INFO
|
||||
usb_audio_info(chip,
|
||||
"set resolution quirk: cval->res = 384\n");
|
||||
cval->res = 384;
|
||||
}
|
||||
|
@ -931,7 +936,8 @@ static int get_min_max_with_quirks(struct usb_mixer_elem_info *cval,
|
|||
}
|
||||
if (get_ctl_value(cval, UAC_GET_MAX, (cval->control << 8) | minchn, &cval->max) < 0 ||
|
||||
get_ctl_value(cval, UAC_GET_MIN, (cval->control << 8) | minchn, &cval->min) < 0) {
|
||||
snd_printd(KERN_ERR "%d:%d: cannot get min/max values for control %d (id %d)\n",
|
||||
usb_audio_err(cval->mixer->chip,
|
||||
"%d:%d: cannot get min/max values for control %d (id %d)\n",
|
||||
cval->id, snd_usb_ctrl_intf(cval->mixer->chip), cval->control, cval->id);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
@ -1195,7 +1201,7 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
|
|||
|
||||
cval = kzalloc(sizeof(*cval), GFP_KERNEL);
|
||||
if (! cval) {
|
||||
snd_printk(KERN_ERR "cannot malloc kcontrol\n");
|
||||
usb_audio_err(state->chip, "cannot malloc kcontrol\n");
|
||||
return;
|
||||
}
|
||||
cval->mixer = state->mixer;
|
||||
|
@ -1224,7 +1230,7 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
|
|||
kctl = snd_ctl_new1(&usb_feature_unit_ctl, cval);
|
||||
|
||||
if (! kctl) {
|
||||
snd_printk(KERN_ERR "cannot malloc kcontrol\n");
|
||||
usb_audio_err(state->chip, "cannot malloc kcontrol\n");
|
||||
kfree(cval);
|
||||
return;
|
||||
}
|
||||
|
@ -1298,16 +1304,16 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
|
|||
* devices. It will definitively catch all buggy Logitech devices.
|
||||
*/
|
||||
if (range > 384) {
|
||||
snd_printk(KERN_WARNING "usb_audio: Warning! Unlikely big "
|
||||
usb_audio_warn(state->chip, "Warning! Unlikely big "
|
||||
"volume range (=%u), cval->res is probably wrong.",
|
||||
range);
|
||||
snd_printk(KERN_WARNING "usb_audio: [%d] FU [%s] ch = %d, "
|
||||
usb_audio_warn(state->chip, "[%d] FU [%s] ch = %d, "
|
||||
"val = %d/%d/%d", cval->id,
|
||||
kctl->id.name, cval->channels,
|
||||
cval->min, cval->max, cval->res);
|
||||
}
|
||||
|
||||
snd_printdd(KERN_INFO "[%d] FU [%s] ch = %d, val = %d/%d/%d\n",
|
||||
usb_audio_dbg(state->chip, "[%d] FU [%s] ch = %d, val = %d/%d/%d\n",
|
||||
cval->id, kctl->id.name, cval->channels, cval->min, cval->max, cval->res);
|
||||
snd_usb_mixer_add_control(state->mixer, kctl);
|
||||
}
|
||||
|
@ -1331,16 +1337,17 @@ static int parse_audio_feature_unit(struct mixer_build *state, int unitid, void
|
|||
if (state->mixer->protocol == UAC_VERSION_1) {
|
||||
csize = hdr->bControlSize;
|
||||
if (!csize) {
|
||||
snd_printdd(KERN_ERR "usbaudio: unit %u: "
|
||||
"invalid bControlSize == 0\n", unitid);
|
||||
usb_audio_dbg(state->chip,
|
||||
"unit %u: invalid bControlSize == 0\n",
|
||||
unitid);
|
||||
return -EINVAL;
|
||||
}
|
||||
channels = (hdr->bLength - 7) / csize - 1;
|
||||
bmaControls = hdr->bmaControls;
|
||||
if (hdr->bLength < 7 + csize) {
|
||||
snd_printk(KERN_ERR "usbaudio: unit %u: "
|
||||
"invalid UAC_FEATURE_UNIT descriptor\n",
|
||||
unitid);
|
||||
usb_audio_err(state->chip,
|
||||
"unit %u: invalid UAC_FEATURE_UNIT descriptor\n",
|
||||
unitid);
|
||||
return -EINVAL;
|
||||
}
|
||||
} else {
|
||||
|
@ -1349,9 +1356,9 @@ static int parse_audio_feature_unit(struct mixer_build *state, int unitid, void
|
|||
channels = (hdr->bLength - 6) / 4 - 1;
|
||||
bmaControls = ftr->bmaControls;
|
||||
if (hdr->bLength < 6 + csize) {
|
||||
snd_printk(KERN_ERR "usbaudio: unit %u: "
|
||||
"invalid UAC_FEATURE_UNIT descriptor\n",
|
||||
unitid);
|
||||
usb_audio_err(state->chip,
|
||||
"unit %u: invalid UAC_FEATURE_UNIT descriptor\n",
|
||||
unitid);
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
@ -1369,14 +1376,14 @@ static int parse_audio_feature_unit(struct mixer_build *state, int unitid, void
|
|||
/* master configuration quirks */
|
||||
switch (state->chip->usb_id) {
|
||||
case USB_ID(0x08bb, 0x2702):
|
||||
snd_printk(KERN_INFO
|
||||
"usbmixer: master volume quirk for PCM2702 chip\n");
|
||||
usb_audio_info(state->chip,
|
||||
"usbmixer: master volume quirk for PCM2702 chip\n");
|
||||
/* disable non-functional volume control */
|
||||
master_bits &= ~UAC_CONTROL_BIT(UAC_FU_VOLUME);
|
||||
break;
|
||||
case USB_ID(0x1130, 0xf211):
|
||||
snd_printk(KERN_INFO
|
||||
"usbmixer: volume control quirk for Tenx TP6911 Audio Headset\n");
|
||||
usb_audio_info(state->chip,
|
||||
"usbmixer: volume control quirk for Tenx TP6911 Audio Headset\n");
|
||||
/* disable non-functional volume control */
|
||||
channels = 0;
|
||||
break;
|
||||
|
@ -1478,7 +1485,7 @@ static void build_mixer_unit_ctl(struct mixer_build *state,
|
|||
|
||||
kctl = snd_ctl_new1(&usb_feature_unit_ctl, cval);
|
||||
if (! kctl) {
|
||||
snd_printk(KERN_ERR "cannot malloc kcontrol\n");
|
||||
usb_audio_err(state->chip, "cannot malloc kcontrol\n");
|
||||
kfree(cval);
|
||||
return;
|
||||
}
|
||||
|
@ -1491,7 +1498,7 @@ static void build_mixer_unit_ctl(struct mixer_build *state,
|
|||
len = sprintf(kctl->id.name, "Mixer Source %d", in_ch + 1);
|
||||
append_ctl_name(kctl, " Volume");
|
||||
|
||||
snd_printdd(KERN_INFO "[%d] MU [%s] ch = %d, val = %d/%d\n",
|
||||
usb_audio_dbg(state->chip, "[%d] MU [%s] ch = %d, val = %d/%d\n",
|
||||
cval->id, kctl->id.name, cval->channels, cval->min, cval->max);
|
||||
snd_usb_mixer_add_control(state->mixer, kctl);
|
||||
}
|
||||
|
@ -1508,12 +1515,12 @@ static int parse_audio_mixer_unit(struct mixer_build *state, int unitid, void *r
|
|||
int pin, ich, err;
|
||||
|
||||
if (desc->bLength < 11 || ! (input_pins = desc->bNrInPins) || ! (num_outs = uac_mixer_unit_bNrChannels(desc))) {
|
||||
snd_printk(KERN_ERR "invalid MIXER UNIT descriptor %d\n", unitid);
|
||||
usb_audio_err(state->chip, "invalid MIXER UNIT descriptor %d\n", unitid);
|
||||
return -EINVAL;
|
||||
}
|
||||
/* no bmControls field (e.g. Maya44) -> ignore */
|
||||
if (desc->bLength <= 10 + input_pins) {
|
||||
snd_printdd(KERN_INFO "MU %d has no bmControls field\n", unitid);
|
||||
usb_audio_dbg(state->chip, "MU %d has no bmControls field\n", unitid);
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -1712,7 +1719,7 @@ static int build_audio_procunit(struct mixer_build *state, int unitid, void *raw
|
|||
|
||||
if (desc->bLength < 13 || desc->bLength < 13 + num_ins ||
|
||||
desc->bLength < num_ins + uac_processing_unit_bControlSize(desc, state->mixer->protocol)) {
|
||||
snd_printk(KERN_ERR "invalid %s descriptor (id %d)\n", name, unitid);
|
||||
usb_audio_err(state->chip, "invalid %s descriptor (id %d)\n", name, unitid);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
@ -1738,7 +1745,7 @@ static int build_audio_procunit(struct mixer_build *state, int unitid, void *raw
|
|||
continue;
|
||||
cval = kzalloc(sizeof(*cval), GFP_KERNEL);
|
||||
if (! cval) {
|
||||
snd_printk(KERN_ERR "cannot malloc kcontrol\n");
|
||||
usb_audio_err(state->chip, "cannot malloc kcontrol\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
cval->mixer = state->mixer;
|
||||
|
@ -1770,7 +1777,7 @@ static int build_audio_procunit(struct mixer_build *state, int unitid, void *raw
|
|||
|
||||
kctl = snd_ctl_new1(&mixer_procunit_ctl, cval);
|
||||
if (! kctl) {
|
||||
snd_printk(KERN_ERR "cannot malloc kcontrol\n");
|
||||
usb_audio_err(state->chip, "cannot malloc kcontrol\n");
|
||||
kfree(cval);
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
@ -1792,7 +1799,8 @@ static int build_audio_procunit(struct mixer_build *state, int unitid, void *raw
|
|||
append_ctl_name(kctl, " ");
|
||||
append_ctl_name(kctl, valinfo->suffix);
|
||||
|
||||
snd_printdd(KERN_INFO "[%d] PU [%s] ch = %d, val = %d/%d\n",
|
||||
usb_audio_dbg(state->chip,
|
||||
"[%d] PU [%s] ch = %d, val = %d/%d\n",
|
||||
cval->id, kctl->id.name, cval->channels, cval->min, cval->max);
|
||||
if ((err = snd_usb_mixer_add_control(state->mixer, kctl)) < 0)
|
||||
return err;
|
||||
|
@ -1917,7 +1925,8 @@ static int parse_audio_selector_unit(struct mixer_build *state, int unitid, void
|
|||
char **namelist;
|
||||
|
||||
if (!desc->bNrInPins || desc->bLength < 5 + desc->bNrInPins) {
|
||||
snd_printk(KERN_ERR "invalid SELECTOR UNIT descriptor %d\n", unitid);
|
||||
usb_audio_err(state->chip,
|
||||
"invalid SELECTOR UNIT descriptor %d\n", unitid);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
@ -1935,7 +1944,7 @@ static int parse_audio_selector_unit(struct mixer_build *state, int unitid, void
|
|||
|
||||
cval = kzalloc(sizeof(*cval), GFP_KERNEL);
|
||||
if (! cval) {
|
||||
snd_printk(KERN_ERR "cannot malloc kcontrol\n");
|
||||
usb_audio_err(state->chip, "cannot malloc kcontrol\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
cval->mixer = state->mixer;
|
||||
|
@ -1954,7 +1963,7 @@ static int parse_audio_selector_unit(struct mixer_build *state, int unitid, void
|
|||
|
||||
namelist = kmalloc(sizeof(char *) * desc->bNrInPins, GFP_KERNEL);
|
||||
if (! namelist) {
|
||||
snd_printk(KERN_ERR "cannot malloc\n");
|
||||
usb_audio_err(state->chip, "cannot malloc\n");
|
||||
kfree(cval);
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
@ -1964,7 +1973,7 @@ static int parse_audio_selector_unit(struct mixer_build *state, int unitid, void
|
|||
len = 0;
|
||||
namelist[i] = kmalloc(MAX_ITEM_NAME_LEN, GFP_KERNEL);
|
||||
if (! namelist[i]) {
|
||||
snd_printk(KERN_ERR "cannot malloc\n");
|
||||
usb_audio_err(state->chip, "cannot malloc\n");
|
||||
while (i--)
|
||||
kfree(namelist[i]);
|
||||
kfree(namelist);
|
||||
|
@ -1981,7 +1990,7 @@ static int parse_audio_selector_unit(struct mixer_build *state, int unitid, void
|
|||
|
||||
kctl = snd_ctl_new1(&mixer_selectunit_ctl, cval);
|
||||
if (! kctl) {
|
||||
snd_printk(KERN_ERR "cannot malloc kcontrol\n");
|
||||
usb_audio_err(state->chip, "cannot malloc kcontrol\n");
|
||||
kfree(namelist);
|
||||
kfree(cval);
|
||||
return -ENOMEM;
|
||||
|
@ -2009,7 +2018,7 @@ static int parse_audio_selector_unit(struct mixer_build *state, int unitid, void
|
|||
append_ctl_name(kctl, " Playback Source");
|
||||
}
|
||||
|
||||
snd_printdd(KERN_INFO "[%d] SU [%s] items = %d\n",
|
||||
usb_audio_dbg(state->chip, "[%d] SU [%s] items = %d\n",
|
||||
cval->id, kctl->id.name, desc->bNrInPins);
|
||||
if ((err = snd_usb_mixer_add_control(state->mixer, kctl)) < 0)
|
||||
return err;
|
||||
|
@ -2031,7 +2040,7 @@ static int parse_audio_unit(struct mixer_build *state, int unitid)
|
|||
|
||||
p1 = find_audio_control_unit(state, unitid);
|
||||
if (!p1) {
|
||||
snd_printk(KERN_ERR "usbaudio: unit %d not found!\n", unitid);
|
||||
usb_audio_err(state->chip, "unit %d not found!\n", unitid);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
@ -2061,7 +2070,8 @@ static int parse_audio_unit(struct mixer_build *state, int unitid)
|
|||
case UAC2_EXTENSION_UNIT_V2:
|
||||
return parse_audio_extension_unit(state, unitid, p1);
|
||||
default:
|
||||
snd_printk(KERN_ERR "usbaudio: unit %u: unexpected type 0x%02x\n", unitid, p1[2]);
|
||||
usb_audio_err(state->chip,
|
||||
"unit %u: unexpected type 0x%02x\n", unitid, p1[2]);
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
@ -2209,8 +2219,9 @@ static void snd_usb_mixer_interrupt_v2(struct usb_mixer_interface *mixer,
|
|||
__u8 channel = value & 0xff;
|
||||
|
||||
if (channel >= MAX_CHANNELS) {
|
||||
snd_printk(KERN_DEBUG "%s(): bogus channel number %d\n",
|
||||
__func__, channel);
|
||||
usb_audio_dbg(mixer->chip,
|
||||
"%s(): bogus channel number %d\n",
|
||||
__func__, channel);
|
||||
return;
|
||||
}
|
||||
|
||||
|
@ -2239,8 +2250,9 @@ static void snd_usb_mixer_interrupt_v2(struct usb_mixer_interface *mixer,
|
|||
break;
|
||||
|
||||
default:
|
||||
snd_printk(KERN_DEBUG "unknown attribute %d in interrupt\n",
|
||||
attribute);
|
||||
usb_audio_dbg(mixer->chip,
|
||||
"unknown attribute %d in interrupt\n",
|
||||
attribute);
|
||||
break;
|
||||
} /* switch */
|
||||
}
|
||||
|
@ -2261,7 +2273,7 @@ static void snd_usb_mixer_interrupt(struct urb *urb)
|
|||
for (status = urb->transfer_buffer;
|
||||
len >= sizeof(*status);
|
||||
len -= sizeof(*status), status++) {
|
||||
snd_printd(KERN_DEBUG "status interrupt: %02x %02x\n",
|
||||
dev_dbg(&urb->dev->dev, "status interrupt: %02x %02x\n",
|
||||
status->bStatusType,
|
||||
status->bOriginator);
|
||||
|
||||
|
|
|
@ -600,8 +600,8 @@ static int snd_nativeinstruments_control_get(struct snd_kcontrol *kcontrol,
|
|||
up_read(&mixer->chip->shutdown_rwsem);
|
||||
|
||||
if (ret < 0) {
|
||||
snd_printk(KERN_ERR
|
||||
"unable to issue vendor read request (ret = %d)", ret);
|
||||
dev_err(&dev->dev,
|
||||
"unable to issue vendor read request (ret = %d)", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
@ -631,8 +631,8 @@ static int snd_nativeinstruments_control_put(struct snd_kcontrol *kcontrol,
|
|||
up_read(&mixer->chip->shutdown_rwsem);
|
||||
|
||||
if (ret < 0) {
|
||||
snd_printk(KERN_ERR
|
||||
"unable to issue vendor write request (ret = %d)", ret);
|
||||
dev_err(&dev->dev,
|
||||
"unable to issue vendor write request (ret = %d)", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
@ -1699,7 +1699,7 @@ void snd_usb_mixer_rc_memory_change(struct usb_mixer_interface *mixer,
|
|||
snd_usb_mixer_notify_id(mixer, mixer->rc_cfg->mute_mixer_id);
|
||||
break;
|
||||
default:
|
||||
snd_printd(KERN_DEBUG "memory change in unknown unit %d\n", unitid);
|
||||
usb_audio_dbg(mixer->chip, "memory change in unknown unit %d\n", unitid);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
|
|
@ -166,8 +166,8 @@ static int init_pitch_v1(struct snd_usb_audio *chip, int iface,
|
|||
USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_OUT,
|
||||
UAC_EP_CS_ATTR_PITCH_CONTROL << 8, ep,
|
||||
data, sizeof(data))) < 0) {
|
||||
snd_printk(KERN_ERR "%d:%d:%d: cannot set enable PITCH\n",
|
||||
dev->devnum, iface, ep);
|
||||
usb_audio_err(chip, "%d:%d: cannot set enable PITCH\n",
|
||||
iface, ep);
|
||||
return err;
|
||||
}
|
||||
|
||||
|
@ -187,8 +187,8 @@ static int init_pitch_v2(struct snd_usb_audio *chip, int iface,
|
|||
USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_OUT,
|
||||
UAC2_EP_CS_PITCH << 8, 0,
|
||||
data, sizeof(data))) < 0) {
|
||||
snd_printk(KERN_ERR "%d:%d:%d: cannot set enable PITCH (v2)\n",
|
||||
dev->devnum, iface, fmt->altsetting);
|
||||
usb_audio_err(chip, "%d:%d: cannot set enable PITCH (v2)\n",
|
||||
iface, fmt->altsetting);
|
||||
return err;
|
||||
}
|
||||
|
||||
|
@ -226,7 +226,7 @@ static int start_endpoints(struct snd_usb_substream *subs, bool can_sleep)
|
|||
if (!test_and_set_bit(SUBSTREAM_FLAG_DATA_EP_STARTED, &subs->flags)) {
|
||||
struct snd_usb_endpoint *ep = subs->data_endpoint;
|
||||
|
||||
snd_printdd(KERN_DEBUG "Starting data EP @%p\n", ep);
|
||||
dev_dbg(&subs->dev->dev, "Starting data EP @%p\n", ep);
|
||||
|
||||
ep->data_subs = subs;
|
||||
err = snd_usb_endpoint_start(ep, can_sleep);
|
||||
|
@ -247,16 +247,15 @@ static int start_endpoints(struct snd_usb_substream *subs, bool can_sleep)
|
|||
subs->sync_endpoint->altsetting);
|
||||
if (err < 0) {
|
||||
clear_bit(SUBSTREAM_FLAG_SYNC_EP_STARTED, &subs->flags);
|
||||
snd_printk(KERN_ERR
|
||||
"%d:%d:%d: cannot set interface (%d)\n",
|
||||
subs->dev->devnum,
|
||||
dev_err(&subs->dev->dev,
|
||||
"%d:%d: cannot set interface (%d)\n",
|
||||
subs->sync_endpoint->iface,
|
||||
subs->sync_endpoint->altsetting, err);
|
||||
return -EIO;
|
||||
}
|
||||
}
|
||||
|
||||
snd_printdd(KERN_DEBUG "Starting sync EP @%p\n", ep);
|
||||
dev_dbg(&subs->dev->dev, "Starting sync EP @%p\n", ep);
|
||||
|
||||
ep->sync_slave = subs->data_endpoint;
|
||||
err = snd_usb_endpoint_start(ep, can_sleep);
|
||||
|
@ -410,8 +409,9 @@ static int set_sync_endpoint(struct snd_usb_substream *subs,
|
|||
if ((get_endpoint(alts, 1)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_ISOC ||
|
||||
(get_endpoint(alts, 1)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
|
||||
get_endpoint(alts, 1)->bSynchAddress != 0)) {
|
||||
snd_printk(KERN_ERR "%d:%d:%d : invalid sync pipe. bmAttributes %02x, bLength %d, bSynchAddress %02x\n",
|
||||
dev->devnum, fmt->iface, fmt->altsetting,
|
||||
dev_err(&dev->dev,
|
||||
"%d:%d : invalid sync pipe. bmAttributes %02x, bLength %d, bSynchAddress %02x\n",
|
||||
fmt->iface, fmt->altsetting,
|
||||
get_endpoint(alts, 1)->bmAttributes,
|
||||
get_endpoint(alts, 1)->bLength,
|
||||
get_endpoint(alts, 1)->bSynchAddress);
|
||||
|
@ -421,8 +421,9 @@ static int set_sync_endpoint(struct snd_usb_substream *subs,
|
|||
if (get_endpoint(alts, 0)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
|
||||
((is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress | USB_DIR_IN)) ||
|
||||
(!is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress & ~USB_DIR_IN)))) {
|
||||
snd_printk(KERN_ERR "%d:%d:%d : invalid sync pipe. is_playback %d, ep %02x, bSynchAddress %02x\n",
|
||||
dev->devnum, fmt->iface, fmt->altsetting,
|
||||
dev_err(&dev->dev,
|
||||
"%d:%d : invalid sync pipe. is_playback %d, ep %02x, bSynchAddress %02x\n",
|
||||
fmt->iface, fmt->altsetting,
|
||||
is_playback, ep, get_endpoint(alts, 0)->bSynchAddress);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
@ -469,8 +470,9 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt)
|
|||
if (subs->interface >= 0 && subs->interface != fmt->iface) {
|
||||
err = usb_set_interface(subs->dev, subs->interface, 0);
|
||||
if (err < 0) {
|
||||
snd_printk(KERN_ERR "%d:%d:%d: return to setting 0 failed (%d)\n",
|
||||
dev->devnum, fmt->iface, fmt->altsetting, err);
|
||||
dev_err(&dev->dev,
|
||||
"%d:%d: return to setting 0 failed (%d)\n",
|
||||
fmt->iface, fmt->altsetting, err);
|
||||
return -EIO;
|
||||
}
|
||||
subs->interface = -1;
|
||||
|
@ -482,12 +484,13 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt)
|
|||
subs->altset_idx != fmt->altset_idx) {
|
||||
err = usb_set_interface(dev, fmt->iface, fmt->altsetting);
|
||||
if (err < 0) {
|
||||
snd_printk(KERN_ERR "%d:%d:%d: usb_set_interface failed (%d)\n",
|
||||
dev->devnum, fmt->iface, fmt->altsetting, err);
|
||||
dev_err(&dev->dev,
|
||||
"%d:%d: usb_set_interface failed (%d)\n",
|
||||
fmt->iface, fmt->altsetting, err);
|
||||
return -EIO;
|
||||
}
|
||||
snd_printdd(KERN_INFO "setting usb interface %d:%d\n",
|
||||
fmt->iface, fmt->altsetting);
|
||||
dev_dbg(&dev->dev, "setting usb interface %d:%d\n",
|
||||
fmt->iface, fmt->altsetting);
|
||||
subs->interface = fmt->iface;
|
||||
subs->altset_idx = fmt->altset_idx;
|
||||
|
||||
|
@ -523,20 +526,23 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt)
|
|||
* - Requested PCM format is not supported.
|
||||
* - Requested sample rate is not supported.
|
||||
*/
|
||||
static int match_endpoint_audioformats(struct audioformat *fp,
|
||||
struct audioformat *match, int rate,
|
||||
snd_pcm_format_t pcm_format)
|
||||
static int match_endpoint_audioformats(struct snd_usb_substream *subs,
|
||||
struct audioformat *fp,
|
||||
struct audioformat *match, int rate,
|
||||
snd_pcm_format_t pcm_format)
|
||||
{
|
||||
int i;
|
||||
int score = 0;
|
||||
|
||||
if (fp->channels < 1) {
|
||||
snd_printdd("%s: (fmt @%p) no channels\n", __func__, fp);
|
||||
dev_dbg(&subs->dev->dev,
|
||||
"%s: (fmt @%p) no channels\n", __func__, fp);
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (!(fp->formats & pcm_format_to_bits(pcm_format))) {
|
||||
snd_printdd("%s: (fmt @%p) no match for format %d\n", __func__,
|
||||
dev_dbg(&subs->dev->dev,
|
||||
"%s: (fmt @%p) no match for format %d\n", __func__,
|
||||
fp, pcm_format);
|
||||
return 0;
|
||||
}
|
||||
|
@ -548,7 +554,8 @@ static int match_endpoint_audioformats(struct audioformat *fp,
|
|||
}
|
||||
}
|
||||
if (!score) {
|
||||
snd_printdd("%s: (fmt @%p) no match for rate %d\n", __func__,
|
||||
dev_dbg(&subs->dev->dev,
|
||||
"%s: (fmt @%p) no match for rate %d\n", __func__,
|
||||
fp, rate);
|
||||
return 0;
|
||||
}
|
||||
|
@ -556,7 +563,8 @@ static int match_endpoint_audioformats(struct audioformat *fp,
|
|||
if (fp->channels == match->channels)
|
||||
score++;
|
||||
|
||||
snd_printdd("%s: (fmt @%p) score %d\n", __func__, fp, score);
|
||||
dev_dbg(&subs->dev->dev,
|
||||
"%s: (fmt @%p) score %d\n", __func__, fp, score);
|
||||
|
||||
return score;
|
||||
}
|
||||
|
@ -587,7 +595,8 @@ static int configure_sync_endpoint(struct snd_usb_substream *subs)
|
|||
|
||||
/* Try to find the best matching audioformat. */
|
||||
list_for_each_entry(fp, &sync_subs->fmt_list, list) {
|
||||
int score = match_endpoint_audioformats(fp, subs->cur_audiofmt,
|
||||
int score = match_endpoint_audioformats(subs,
|
||||
fp, subs->cur_audiofmt,
|
||||
subs->cur_rate, subs->pcm_format);
|
||||
|
||||
if (score > cur_score) {
|
||||
|
@ -597,7 +606,8 @@ static int configure_sync_endpoint(struct snd_usb_substream *subs)
|
|||
}
|
||||
|
||||
if (unlikely(sync_fp == NULL)) {
|
||||
snd_printk(KERN_ERR "%s: no valid audioformat for sync ep %x found\n",
|
||||
dev_err(&subs->dev->dev,
|
||||
"%s: no valid audioformat for sync ep %x found\n",
|
||||
__func__, sync_subs->ep_num);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
@ -609,7 +619,8 @@ static int configure_sync_endpoint(struct snd_usb_substream *subs)
|
|||
if (sync_fp->channels != subs->channels) {
|
||||
sync_period_bytes = (subs->period_bytes / subs->channels) *
|
||||
sync_fp->channels;
|
||||
snd_printdd("%s: adjusted sync ep period bytes (%d -> %d)\n",
|
||||
dev_dbg(&subs->dev->dev,
|
||||
"%s: adjusted sync ep period bytes (%d -> %d)\n",
|
||||
__func__, subs->period_bytes, sync_period_bytes);
|
||||
}
|
||||
|
||||
|
@ -685,7 +696,8 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream,
|
|||
|
||||
fmt = find_format(subs);
|
||||
if (!fmt) {
|
||||
snd_printd(KERN_DEBUG "cannot set format: format = %#x, rate = %d, channels = %d\n",
|
||||
dev_dbg(&subs->dev->dev,
|
||||
"cannot set format: format = %#x, rate = %d, channels = %d\n",
|
||||
subs->pcm_format, subs->cur_rate, subs->channels);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
@ -742,7 +754,7 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream)
|
|||
int ret;
|
||||
|
||||
if (! subs->cur_audiofmt) {
|
||||
snd_printk(KERN_ERR "usbaudio: no format is specified!\n");
|
||||
dev_err(&subs->dev->dev, "no format is specified!\n");
|
||||
return -ENXIO;
|
||||
}
|
||||
|
||||
|
@ -1235,7 +1247,8 @@ static void retire_capture_urb(struct snd_usb_substream *subs,
|
|||
for (i = 0; i < urb->number_of_packets; i++) {
|
||||
cp = (unsigned char *)urb->transfer_buffer + urb->iso_frame_desc[i].offset + subs->pkt_offset_adj;
|
||||
if (urb->iso_frame_desc[i].status && printk_ratelimit()) {
|
||||
snd_printdd(KERN_ERR "frame %d active: %d\n", i, urb->iso_frame_desc[i].status);
|
||||
dev_dbg(&subs->dev->dev, "frame %d active: %d\n",
|
||||
i, urb->iso_frame_desc[i].status);
|
||||
// continue;
|
||||
}
|
||||
bytes = urb->iso_frame_desc[i].actual_length;
|
||||
|
@ -1245,7 +1258,8 @@ static void retire_capture_urb(struct snd_usb_substream *subs,
|
|||
if (bytes % (runtime->sample_bits >> 3) != 0) {
|
||||
int oldbytes = bytes;
|
||||
bytes = frames * stride;
|
||||
snd_printdd(KERN_ERR "Corrected urb data len. %d->%d\n",
|
||||
dev_warn(&subs->dev->dev,
|
||||
"Corrected urb data len. %d->%d\n",
|
||||
oldbytes, bytes);
|
||||
}
|
||||
/* update the current pointer */
|
||||
|
@ -1488,7 +1502,8 @@ static void retire_playback_urb(struct snd_usb_substream *subs,
|
|||
* on two reads of a counter updated every ms.
|
||||
*/
|
||||
if (abs(est_delay - subs->last_delay) * 1000 > runtime->rate * 2)
|
||||
snd_printk(KERN_DEBUG "delay: estimated %d, actual %d\n",
|
||||
dev_dbg(&subs->dev->dev,
|
||||
"delay: estimated %d, actual %d\n",
|
||||
est_delay, subs->last_delay);
|
||||
|
||||
if (!subs->running) {
|
||||
|
|
|
@ -110,7 +110,7 @@ static int create_standard_audio_quirk(struct snd_usb_audio *chip,
|
|||
altsd = get_iface_desc(alts);
|
||||
err = snd_usb_parse_audio_interface(chip, altsd->bInterfaceNumber);
|
||||
if (err < 0) {
|
||||
snd_printk(KERN_ERR "cannot setup if %d: error %d\n",
|
||||
usb_audio_err(chip, "cannot setup if %d: error %d\n",
|
||||
altsd->bInterfaceNumber, err);
|
||||
return err;
|
||||
}
|
||||
|
@ -135,7 +135,7 @@ static int create_fixed_stream_quirk(struct snd_usb_audio *chip,
|
|||
|
||||
fp = kmemdup(quirk->data, sizeof(*fp), GFP_KERNEL);
|
||||
if (!fp) {
|
||||
snd_printk(KERN_ERR "cannot memdup\n");
|
||||
usb_audio_err(chip, "cannot memdup\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
if (fp->nr_rates > MAX_NR_RATES) {
|
||||
|
@ -464,7 +464,7 @@ static int create_uaxx_quirk(struct snd_usb_audio *chip,
|
|||
fp->rate_max = fp->rate_min = 96000;
|
||||
break;
|
||||
default:
|
||||
snd_printk(KERN_ERR "unknown sample rate\n");
|
||||
usb_audio_err(chip, "unknown sample rate\n");
|
||||
kfree(fp);
|
||||
return -ENXIO;
|
||||
}
|
||||
|
@ -536,7 +536,7 @@ int snd_usb_create_quirk(struct snd_usb_audio *chip,
|
|||
if (quirk->type < QUIRK_TYPE_COUNT) {
|
||||
return quirk_funcs[quirk->type](chip, iface, driver, quirk);
|
||||
} else {
|
||||
snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type);
|
||||
usb_audio_err(chip, "invalid quirk type %d\n", quirk->type);
|
||||
return -ENXIO;
|
||||
}
|
||||
}
|
||||
|
@ -555,18 +555,21 @@ static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interfac
|
|||
|
||||
if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD ||
|
||||
le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_NEW) {
|
||||
snd_printdd("sending Extigy boot sequence...\n");
|
||||
dev_dbg(&dev->dev, "sending Extigy boot sequence...\n");
|
||||
/* Send message to force it to reconnect with full interface. */
|
||||
err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev,0),
|
||||
0x10, 0x43, 0x0001, 0x000a, NULL, 0);
|
||||
if (err < 0) snd_printdd("error sending boot message: %d\n", err);
|
||||
if (err < 0)
|
||||
dev_dbg(&dev->dev, "error sending boot message: %d\n", err);
|
||||
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
|
||||
&dev->descriptor, sizeof(dev->descriptor));
|
||||
config = dev->actconfig;
|
||||
if (err < 0) snd_printdd("error usb_get_descriptor: %d\n", err);
|
||||
if (err < 0)
|
||||
dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
|
||||
err = usb_reset_configuration(dev);
|
||||
if (err < 0) snd_printdd("error usb_reset_configuration: %d\n", err);
|
||||
snd_printdd("extigy_boot: new boot length = %d\n",
|
||||
if (err < 0)
|
||||
dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err);
|
||||
dev_dbg(&dev->dev, "extigy_boot: new boot length = %d\n",
|
||||
le16_to_cpu(get_cfg_desc(config)->wTotalLength));
|
||||
return -ENODEV; /* quit this anyway */
|
||||
}
|
||||
|
@ -594,7 +597,7 @@ static int snd_usb_fasttrackpro_boot_quirk(struct usb_device *dev)
|
|||
int err;
|
||||
|
||||
if (dev->actconfig->desc.bConfigurationValue == 1) {
|
||||
snd_printk(KERN_INFO "usb-audio: "
|
||||
dev_info(&dev->dev,
|
||||
"Fast Track Pro switching to config #2\n");
|
||||
/* This function has to be available by the usb core module.
|
||||
* if it is not avialable the boot quirk has to be left out
|
||||
|
@ -603,14 +606,15 @@ static int snd_usb_fasttrackpro_boot_quirk(struct usb_device *dev)
|
|||
*/
|
||||
err = usb_driver_set_configuration(dev, 2);
|
||||
if (err < 0)
|
||||
snd_printdd("error usb_driver_set_configuration: %d\n",
|
||||
err);
|
||||
dev_dbg(&dev->dev,
|
||||
"error usb_driver_set_configuration: %d\n",
|
||||
err);
|
||||
/* Always return an error, so that we stop creating a device
|
||||
that will just be destroyed and recreated with a new
|
||||
configuration */
|
||||
return -ENODEV;
|
||||
} else
|
||||
snd_printk(KERN_INFO "usb-audio: Fast Track Pro config OK\n");
|
||||
dev_info(&dev->dev, "Fast Track Pro config OK\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
@ -779,11 +783,11 @@ static int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
|
|||
fwsize = le16_to_cpu(get_cfg_desc(config)->wTotalLength);
|
||||
|
||||
if (fwsize != MBOX2_FIRMWARE_SIZE) {
|
||||
snd_printk(KERN_ERR "usb-audio: Invalid firmware size=%d.\n", fwsize);
|
||||
dev_err(&dev->dev, "Invalid firmware size=%d.\n", fwsize);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
snd_printd("usb-audio: Sending Digidesign Mbox 2 boot sequence...\n");
|
||||
dev_dbg(&dev->dev, "Sending Digidesign Mbox 2 boot sequence...\n");
|
||||
|
||||
count = 0;
|
||||
bootresponse[0] = MBOX2_BOOT_LOADING;
|
||||
|
@ -794,32 +798,32 @@ static int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
|
|||
0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012);
|
||||
if (bootresponse[0] == MBOX2_BOOT_READY)
|
||||
break;
|
||||
snd_printd("usb-audio: device not ready, resending boot sequence...\n");
|
||||
dev_dbg(&dev->dev, "device not ready, resending boot sequence...\n");
|
||||
count++;
|
||||
}
|
||||
|
||||
if (bootresponse[0] != MBOX2_BOOT_READY) {
|
||||
snd_printk(KERN_ERR "usb-audio: Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse[0]);
|
||||
dev_err(&dev->dev, "Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse[0]);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
snd_printdd("usb-audio: device initialised!\n");
|
||||
dev_dbg(&dev->dev, "device initialised!\n");
|
||||
|
||||
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
|
||||
&dev->descriptor, sizeof(dev->descriptor));
|
||||
config = dev->actconfig;
|
||||
if (err < 0)
|
||||
snd_printd("error usb_get_descriptor: %d\n", err);
|
||||
dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
|
||||
|
||||
err = usb_reset_configuration(dev);
|
||||
if (err < 0)
|
||||
snd_printd("error usb_reset_configuration: %d\n", err);
|
||||
snd_printdd("mbox2_boot: new boot length = %d\n",
|
||||
dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err);
|
||||
dev_dbg(&dev->dev, "mbox2_boot: new boot length = %d\n",
|
||||
le16_to_cpu(get_cfg_desc(config)->wTotalLength));
|
||||
|
||||
mbox2_setup_48_24_magic(dev);
|
||||
|
||||
snd_printk(KERN_INFO "usb-audio: Digidesign Mbox 2: 24bit 48kHz");
|
||||
dev_info(&dev->dev, "Digidesign Mbox 2: 24bit 48kHz");
|
||||
|
||||
return 0; /* Successful boot */
|
||||
}
|
||||
|
@ -865,7 +869,7 @@ static int quattro_skip_setting_quirk(struct snd_usb_audio *chip,
|
|||
return 1; /* skip this altsetting */
|
||||
}
|
||||
}
|
||||
snd_printdd(KERN_INFO
|
||||
usb_audio_dbg(chip,
|
||||
"using altsetting %d for interface %d config %d\n",
|
||||
altno, iface, chip->setup);
|
||||
return 0; /* keep this altsetting */
|
||||
|
@ -932,7 +936,7 @@ static int fasttrackpro_skip_setting_quirk(struct snd_usb_audio *chip,
|
|||
return 1;
|
||||
}
|
||||
|
||||
snd_printdd(KERN_INFO
|
||||
usb_audio_dbg(chip,
|
||||
"using altsetting %d for interface %d config %d\n",
|
||||
altno, iface, chip->setup);
|
||||
return 0; /* keep this altsetting */
|
||||
|
|
|
@ -411,10 +411,9 @@ static int parse_uac_endpoint_attributes(struct snd_usb_audio *chip,
|
|||
|
||||
if (!csep || csep->bLength < 7 ||
|
||||
csep->bDescriptorSubtype != UAC_EP_GENERAL) {
|
||||
snd_printk(KERN_WARNING "%d:%u:%d : no or invalid"
|
||||
" class specific endpoint descriptor\n",
|
||||
chip->dev->devnum, iface_no,
|
||||
altsd->bAlternateSetting);
|
||||
usb_audio_warn(chip,
|
||||
"%u:%d : no or invalid class specific endpoint descriptor\n",
|
||||
iface_no, altsd->bAlternateSetting);
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -533,8 +532,8 @@ int snd_usb_parse_audio_interface(struct snd_usb_audio *chip, int iface_no)
|
|||
/* get audio formats */
|
||||
switch (protocol) {
|
||||
default:
|
||||
snd_printdd(KERN_WARNING "%d:%u:%d: unknown interface protocol %#02x, assuming v1\n",
|
||||
dev->devnum, iface_no, altno, protocol);
|
||||
dev_dbg(&dev->dev, "%u:%d: unknown interface protocol %#02x, assuming v1\n",
|
||||
iface_no, altno, protocol);
|
||||
protocol = UAC_VERSION_1;
|
||||
/* fall through */
|
||||
|
||||
|
@ -544,14 +543,16 @@ int snd_usb_parse_audio_interface(struct snd_usb_audio *chip, int iface_no)
|
|||
struct uac_input_terminal_descriptor *iterm;
|
||||
|
||||
if (!as) {
|
||||
snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n",
|
||||
dev->devnum, iface_no, altno);
|
||||
dev_err(&dev->dev,
|
||||
"%u:%d : UAC_AS_GENERAL descriptor not found\n",
|
||||
iface_no, altno);
|
||||
continue;
|
||||
}
|
||||
|
||||
if (as->bLength < sizeof(*as)) {
|
||||
snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n",
|
||||
dev->devnum, iface_no, altno);
|
||||
dev_err(&dev->dev,
|
||||
"%u:%d : invalid UAC_AS_GENERAL desc\n",
|
||||
iface_no, altno);
|
||||
continue;
|
||||
}
|
||||
|
||||
|
@ -574,14 +575,16 @@ int snd_usb_parse_audio_interface(struct snd_usb_audio *chip, int iface_no)
|
|||
snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
|
||||
|
||||
if (!as) {
|
||||
snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n",
|
||||
dev->devnum, iface_no, altno);
|
||||
dev_err(&dev->dev,
|
||||
"%u:%d : UAC_AS_GENERAL descriptor not found\n",
|
||||
iface_no, altno);
|
||||
continue;
|
||||
}
|
||||
|
||||
if (as->bLength < sizeof(*as)) {
|
||||
snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n",
|
||||
dev->devnum, iface_no, altno);
|
||||
dev_err(&dev->dev,
|
||||
"%u:%d : invalid UAC_AS_GENERAL desc\n",
|
||||
iface_no, altno);
|
||||
continue;
|
||||
}
|
||||
|
||||
|
@ -607,8 +610,9 @@ int snd_usb_parse_audio_interface(struct snd_usb_audio *chip, int iface_no)
|
|||
break;
|
||||
}
|
||||
|
||||
snd_printk(KERN_ERR "%d:%u:%d : bogus bTerminalLink %d\n",
|
||||
dev->devnum, iface_no, altno, as->bTerminalLink);
|
||||
dev_err(&dev->dev,
|
||||
"%u:%d : bogus bTerminalLink %d\n",
|
||||
iface_no, altno, as->bTerminalLink);
|
||||
continue;
|
||||
}
|
||||
}
|
||||
|
@ -616,14 +620,16 @@ int snd_usb_parse_audio_interface(struct snd_usb_audio *chip, int iface_no)
|
|||
/* get format type */
|
||||
fmt = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_FORMAT_TYPE);
|
||||
if (!fmt) {
|
||||
snd_printk(KERN_ERR "%d:%u:%d : no UAC_FORMAT_TYPE desc\n",
|
||||
dev->devnum, iface_no, altno);
|
||||
dev_err(&dev->dev,
|
||||
"%u:%d : no UAC_FORMAT_TYPE desc\n",
|
||||
iface_no, altno);
|
||||
continue;
|
||||
}
|
||||
if (((protocol == UAC_VERSION_1) && (fmt->bLength < 8)) ||
|
||||
((protocol == UAC_VERSION_2) && (fmt->bLength < 6))) {
|
||||
snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_FORMAT_TYPE desc\n",
|
||||
dev->devnum, iface_no, altno);
|
||||
dev_err(&dev->dev,
|
||||
"%u:%d : invalid UAC_FORMAT_TYPE desc\n",
|
||||
iface_no, altno);
|
||||
continue;
|
||||
}
|
||||
|
||||
|
@ -644,7 +650,7 @@ int snd_usb_parse_audio_interface(struct snd_usb_audio *chip, int iface_no)
|
|||
|
||||
fp = kzalloc(sizeof(*fp), GFP_KERNEL);
|
||||
if (! fp) {
|
||||
snd_printk(KERN_ERR "cannot malloc\n");
|
||||
dev_err(&dev->dev, "cannot malloc\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
|
@ -707,7 +713,7 @@ int snd_usb_parse_audio_interface(struct snd_usb_audio *chip, int iface_no)
|
|||
chconfig = 0;
|
||||
fp->chmap = convert_chmap(fp->channels, chconfig, protocol);
|
||||
|
||||
snd_printdd(KERN_INFO "%d:%u:%d: add audio endpoint %#x\n", dev->devnum, iface_no, altno, fp->endpoint);
|
||||
dev_dbg(&dev->dev, "%u:%d: add audio endpoint %#x\n", iface_no, altno, fp->endpoint);
|
||||
err = snd_usb_add_audio_stream(chip, stream, fp);
|
||||
if (err < 0) {
|
||||
kfree(fp->rate_table);
|
||||
|
|
|
@ -60,6 +60,15 @@ struct snd_usb_audio {
|
|||
struct usb_host_interface *ctrl_intf; /* the audio control interface */
|
||||
};
|
||||
|
||||
#define usb_audio_err(chip, fmt, args...) \
|
||||
dev_err(&(chip)->dev->dev, fmt, ##args)
|
||||
#define usb_audio_warn(chip, fmt, args...) \
|
||||
dev_warn(&(chip)->dev->dev, fmt, ##args)
|
||||
#define usb_audio_info(chip, fmt, args...) \
|
||||
dev_info(&(chip)->dev->dev, fmt, ##args)
|
||||
#define usb_audio_dbg(chip, fmt, args...) \
|
||||
dev_dbg(&(chip)->dev->dev, fmt, ##args)
|
||||
|
||||
/*
|
||||
* Information about devices with broken descriptors
|
||||
*/
|
||||
|
|
Loading…
Reference in New Issue