gpio: Add Intel WhiskeyCove PMIC GPIO driver
This patch introduces a separate GPIO driver for Intel WhiskeyCove PMIC. This driver is based on gpio-crystalcove.c. Changes in v7: - Fixed various coding style comments from Andy Shevchenko Changes in v6: - Removed unnecessary wcove_gpio_remove() - Used devm_gpiochip_remove() instead of gpiochip_remove() - Various coding style changes per Mika's comment Changes in v5: - Revisited the interrupt handler code to iterate until all pending interrupts are handled. This change is to avoid missing interrupt when we're inside the interrupt handler. - Used regmap_bulk_read() to read address adjacent registers. Changes in v4: - Converted CTLI_INTCNT_XX macros to less verbose ones INT_DETECT_XX. - Add comments about why there is no .pm for the driver. - Header files re-ordered. - Various coding style change to address Andy's comments. Changes in v3: - Fixed the year in copyright line(2015-->2016). - Removed DRV_NAME macro. - Added kernel-doc for regmap_irq_chip of the wcove_gpio structure. - Line length fix. Changes in v2: - Typo fix (Whsikey --> Whiskey). - Included linux/gpio/driver.h instead of linux/gpio.h - Implemented .set_single_ended(). - Added GPIO register description. - Replaced container_of() with gpiochip_get_data(). - Removed unnecessary "if (gpio > WCOVE_VGPIO_NUM" check. - Removed the device id table and added MODULE_ALIAS(). Signed-off-by: Ajay Thomas <ajay.thomas.david.rajamanickam@intel.com> Signed-off-by: Bin Gao <bin.gao@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Bin Gao
Linus Walleij
parent
f72f4b44df
commit
0ba19cfc2a
|
|
@ -969,6 +969,19 @@ config GPIO_UCB1400
|
|||
This enables support for the Philips UCB1400 GPIO pins.
|
||||
The UCB1400 is an AC97 audio codec.
|
||||
|
||||
config GPIO_WHISKEY_COVE
|
||||
tristate "GPIO support for Whiskey Cove PMIC"
|
||||
depends on INTEL_SOC_PMIC
|
||||
select GPIOLIB_IRQCHIP
|
||||
help
|
||||
Support for GPIO pins on Whiskey Cove PMIC.
|
||||
|
||||
Say Yes if you have a Intel SoC based tablet with Whiskey Cove PMIC
|
||||
inside.
|
||||
|
||||
This driver can also be built as a module. If so, the module will be
|
||||
called gpio-wcove.
|
||||
|
||||
config GPIO_WM831X
|
||||
tristate "WM831x GPIOs"
|
||||
depends on MFD_WM831X
|
||||
|
|
|
|||
|
|
@ -121,6 +121,7 @@ obj-$(CONFIG_GPIO_VF610) += gpio-vf610.o
|
|||
obj-$(CONFIG_GPIO_VIPERBOARD) += gpio-viperboard.o
|
||||
obj-$(CONFIG_GPIO_VR41XX) += gpio-vr41xx.o
|
||||
obj-$(CONFIG_GPIO_VX855) += gpio-vx855.o
|
||||
obj-$(CONFIG_GPIO_WHISKEY_COVE) += gpio-wcove.o
|
||||
obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x.o
|
||||
obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o
|
||||
obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,455 @@
|
|||
/*
|
||||
* Intel Whiskey Cove PMIC GPIO Driver
|
||||
*
|
||||
* This driver is written based on gpio-crystalcove.c
|
||||
*
|
||||
* Copyright (C) 2016 Intel Corporation. All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License version
|
||||
* 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/gpio/driver.h>
|
||||
#include <linux/mfd/intel_soc_pmic.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/seq_file.h>
|
||||
|
||||
/*
|
||||
* Whiskey Cove PMIC has 13 physical GPIO pins divided into 3 banks:
|
||||
* Bank 0: Pin 0 - 6
|
||||
* Bank 1: Pin 7 - 10
|
||||
* Bank 2: Pin 11 -12
|
||||
* Each pin has one output control register and one input control register.
|
||||
*/
|
||||
#define BANK0_NR_PINS 7
|
||||
#define BANK1_NR_PINS 4
|
||||
#define BANK2_NR_PINS 2
|
||||
#define WCOVE_GPIO_NUM (BANK0_NR_PINS + BANK1_NR_PINS + BANK2_NR_PINS)
|
||||
#define WCOVE_VGPIO_NUM 94
|
||||
/* GPIO output control registers (one per pin): 0x4e44 - 0x4e50 */
|
||||
#define GPIO_OUT_CTRL_BASE 0x4e44
|
||||
/* GPIO input control registers (one per pin): 0x4e51 - 0x4e5d */
|
||||
#define GPIO_IN_CTRL_BASE 0x4e51
|
||||
|
||||
/*
|
||||
* GPIO interrupts are organized in two groups:
|
||||
* Group 0: Bank 0 pins (Pin 0 - 6)
|
||||
* Group 1: Bank 1 and Bank 2 pins (Pin 7 - 12)
|
||||
* Each group has two registers (one bit per pin): status and mask.
|
||||
*/
|
||||
#define GROUP0_NR_IRQS 7
|
||||
#define GROUP1_NR_IRQS 6
|
||||
#define IRQ_MASK_BASE 0x4e19
|
||||
#define IRQ_STATUS_BASE 0x4e0b
|
||||
#define UPDATE_IRQ_TYPE BIT(0)
|
||||
#define UPDATE_IRQ_MASK BIT(1)
|
||||
|
||||
#define CTLI_INTCNT_DIS (0 << 1)
|
||||
#define CTLI_INTCNT_NE (1 << 1)
|
||||
#define CTLI_INTCNT_PE (2 << 1)
|
||||
#define CTLI_INTCNT_BE (3 << 1)
|
||||
|
||||
#define CTLO_DIR_IN (0 << 5)
|
||||
#define CTLO_DIR_OUT (1 << 5)
|
||||
|
||||
#define CTLO_DRV_MASK (1 << 4)
|
||||
#define CTLO_DRV_OD (0 << 4)
|
||||
#define CTLO_DRV_CMOS (1 << 4)
|
||||
|
||||
#define CTLO_DRV_REN (1 << 3)
|
||||
|
||||
#define CTLO_RVAL_2KDOWN (0 << 1)
|
||||
#define CTLO_RVAL_2KUP (1 << 1)
|
||||
#define CTLO_RVAL_50KDOWN (2 << 1)
|
||||
#define CTLO_RVAL_50KUP (3 << 1)
|
||||
|
||||
#define CTLO_INPUT_SET (CTLO_DRV_CMOS | CTLO_DRV_REN | CTLO_RVAL_2KUP)
|
||||
#define CTLO_OUTPUT_SET (CTLO_DIR_OUT | CTLO_INPUT_SET)
|
||||
|
||||
enum ctrl_register {
|
||||
CTRL_IN,
|
||||
CTRL_OUT,
|
||||
};
|
||||
|
||||
/*
|
||||
* struct wcove_gpio - Whiskey Cove GPIO controller
|
||||
* @buslock: for bus lock/sync and unlock.
|
||||
* @chip: the abstract gpio_chip structure.
|
||||
* @dev: the gpio device
|
||||
* @regmap: the regmap from the parent device.
|
||||
* @regmap_irq_chip: the regmap of the gpio irq chip.
|
||||
* @update: pending IRQ setting update, to be written to the chip upon unlock.
|
||||
* @intcnt: the Interrupt Detect value to be written.
|
||||
* @set_irq_mask: true if the IRQ mask needs to be set, false to clear.
|
||||
*/
|
||||
struct wcove_gpio {
|
||||
struct mutex buslock;
|
||||
struct gpio_chip chip;
|
||||
struct device *dev;
|
||||
struct regmap *regmap;
|
||||
struct regmap_irq_chip_data *regmap_irq_chip;
|
||||
int update;
|
||||
int intcnt;
|
||||
bool set_irq_mask;
|
||||
};
|
||||
|
||||
static inline unsigned int to_reg(int gpio, enum ctrl_register reg_type)
|
||||
{
|
||||
unsigned int reg;
|
||||
int bank;
|
||||
|
||||
if (gpio < BANK0_NR_PINS)
|
||||
bank = 0;
|
||||
else if (gpio < BANK0_NR_PINS + BANK1_NR_PINS)
|
||||
bank = 1;
|
||||
else
|
||||
bank = 2;
|
||||
|
||||
if (reg_type == CTRL_IN)
|
||||
reg = GPIO_IN_CTRL_BASE + bank;
|
||||
else
|
||||
reg = GPIO_OUT_CTRL_BASE + bank;
|
||||
|
||||
return reg;
|
||||
}
|
||||
|
||||
static void wcove_update_irq_mask(struct wcove_gpio *wg, int gpio)
|
||||
{
|
||||
unsigned int reg, mask;
|
||||
|
||||
if (gpio < GROUP0_NR_IRQS) {
|
||||
reg = IRQ_MASK_BASE;
|
||||
mask = BIT(gpio % GROUP0_NR_IRQS);
|
||||
} else {
|
||||
reg = IRQ_MASK_BASE + 1;
|
||||
mask = BIT((gpio - GROUP0_NR_IRQS) % GROUP1_NR_IRQS);
|
||||
}
|
||||
|
||||
if (wg->set_irq_mask)
|
||||
regmap_update_bits(wg->regmap, reg, mask, mask);
|
||||
else
|
||||
regmap_update_bits(wg->regmap, reg, mask, 0);
|
||||
}
|
||||
|
||||
static void wcove_update_irq_ctrl(struct wcove_gpio *wg, int gpio)
|
||||
{
|
||||
unsigned int reg = to_reg(gpio, CTRL_IN);
|
||||
|
||||
regmap_update_bits(wg->regmap, reg, CTLI_INTCNT_BE, wg->intcnt);
|
||||
}
|
||||
|
||||
static int wcove_gpio_dir_in(struct gpio_chip *chip, unsigned int gpio)
|
||||
{
|
||||
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
||||
|
||||
return regmap_write(wg->regmap, to_reg(gpio, CTRL_OUT),
|
||||
CTLO_INPUT_SET);
|
||||
}
|
||||
|
||||
static int wcove_gpio_dir_out(struct gpio_chip *chip, unsigned int gpio,
|
||||
int value)
|
||||
{
|
||||
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
||||
|
||||
return regmap_write(wg->regmap, to_reg(gpio, CTRL_OUT),
|
||||
CTLO_OUTPUT_SET | value);
|
||||
}
|
||||
|
||||
static int wcove_gpio_get(struct gpio_chip *chip, unsigned int gpio)
|
||||
{
|
||||
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
||||
unsigned int val;
|
||||
int ret;
|
||||
|
||||
ret = regmap_read(wg->regmap, to_reg(gpio, CTRL_IN), &val);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
return val & 0x1;
|
||||
}
|
||||
|
||||
static void wcove_gpio_set(struct gpio_chip *chip,
|
||||
unsigned int gpio, int value)
|
||||
{
|
||||
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
||||
|
||||
if (value)
|
||||
regmap_update_bits(wg->regmap, to_reg(gpio, CTRL_OUT), 1, 1);
|
||||
else
|
||||
regmap_update_bits(wg->regmap, to_reg(gpio, CTRL_OUT), 1, 0);
|
||||
}
|
||||
|
||||
static int wcove_gpio_set_single_ended(struct gpio_chip *chip,
|
||||
unsigned int gpio,
|
||||
enum single_ended_mode mode)
|
||||
{
|
||||
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
||||
|
||||
switch (mode) {
|
||||
case LINE_MODE_OPEN_DRAIN:
|
||||
return regmap_update_bits(wg->regmap, to_reg(gpio, CTRL_OUT),
|
||||
CTLO_DRV_MASK, CTLO_DRV_OD);
|
||||
case LINE_MODE_PUSH_PULL:
|
||||
return regmap_update_bits(wg->regmap, to_reg(gpio, CTRL_OUT),
|
||||
CTLO_DRV_MASK, CTLO_DRV_CMOS);
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
return -ENOTSUPP;
|
||||
}
|
||||
|
||||
static int wcove_irq_type(struct irq_data *data, unsigned int type)
|
||||
{
|
||||
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
||||
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
||||
|
||||
switch (type) {
|
||||
case IRQ_TYPE_NONE:
|
||||
wg->intcnt = CTLI_INTCNT_DIS;
|
||||
break;
|
||||
case IRQ_TYPE_EDGE_BOTH:
|
||||
wg->intcnt = CTLI_INTCNT_BE;
|
||||
break;
|
||||
case IRQ_TYPE_EDGE_RISING:
|
||||
wg->intcnt = CTLI_INTCNT_PE;
|
||||
break;
|
||||
case IRQ_TYPE_EDGE_FALLING:
|
||||
wg->intcnt = CTLI_INTCNT_NE;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
wg->update |= UPDATE_IRQ_TYPE;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void wcove_bus_lock(struct irq_data *data)
|
||||
{
|
||||
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
||||
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
||||
|
||||
mutex_lock(&wg->buslock);
|
||||
}
|
||||
|
||||
static void wcove_bus_sync_unlock(struct irq_data *data)
|
||||
{
|
||||
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
||||
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
||||
int gpio = data->hwirq;
|
||||
|
||||
if (wg->update & UPDATE_IRQ_TYPE)
|
||||
wcove_update_irq_ctrl(wg, gpio);
|
||||
if (wg->update & UPDATE_IRQ_MASK)
|
||||
wcove_update_irq_mask(wg, gpio);
|
||||
wg->update = 0;
|
||||
|
||||
mutex_unlock(&wg->buslock);
|
||||
}
|
||||
|
||||
static void wcove_irq_unmask(struct irq_data *data)
|
||||
{
|
||||
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
||||
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
||||
|
||||
wg->set_irq_mask = false;
|
||||
wg->update |= UPDATE_IRQ_MASK;
|
||||
}
|
||||
|
||||
static void wcove_irq_mask(struct irq_data *data)
|
||||
{
|
||||
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
||||
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
||||
|
||||
wg->set_irq_mask = true;
|
||||
wg->update |= UPDATE_IRQ_MASK;
|
||||
}
|
||||
|
||||
static struct irq_chip wcove_irqchip = {
|
||||
.name = "Whiskey Cove",
|
||||
.irq_mask = wcove_irq_mask,
|
||||
.irq_unmask = wcove_irq_unmask,
|
||||
.irq_set_type = wcove_irq_type,
|
||||
.irq_bus_lock = wcove_bus_lock,
|
||||
.irq_bus_sync_unlock = wcove_bus_sync_unlock,
|
||||
};
|
||||
|
||||
static irqreturn_t wcove_gpio_irq_handler(int irq, void *data)
|
||||
{
|
||||
struct wcove_gpio *wg = (struct wcove_gpio *)data;
|
||||
unsigned int pending, virq, gpio, mask, offset;
|
||||
u8 p[2];
|
||||
|
||||
if (regmap_bulk_read(wg->regmap, IRQ_STATUS_BASE, p, 2)) {
|
||||
dev_err(wg->dev, "Failed to read irq status register\n");
|
||||
return IRQ_NONE;
|
||||
}
|
||||
|
||||
pending = p[0] | (p[1] << 8);
|
||||
if (!pending)
|
||||
return IRQ_NONE;
|
||||
|
||||
/* Iterate until no interrupt is pending */
|
||||
while (pending) {
|
||||
/* One iteration is for all pending bits */
|
||||
for_each_set_bit(gpio, (const unsigned long *)&pending,
|
||||
GROUP0_NR_IRQS) {
|
||||
offset = (gpio > GROUP0_NR_IRQS) ? 1 : 0;
|
||||
mask = (offset == 1) ? BIT(gpio - GROUP0_NR_IRQS) :
|
||||
BIT(gpio);
|
||||
virq = irq_find_mapping(wg->chip.irqdomain, gpio);
|
||||
handle_nested_irq(virq);
|
||||
regmap_update_bits(wg->regmap, IRQ_STATUS_BASE + offset,
|
||||
mask, mask);
|
||||
}
|
||||
|
||||
/* Next iteration */
|
||||
if (regmap_bulk_read(wg->regmap, IRQ_STATUS_BASE, p, 2)) {
|
||||
dev_err(wg->dev, "Failed to read irq status\n");
|
||||
break;
|
||||
}
|
||||
|
||||
pending = p[0] | (p[1] << 8);
|
||||
}
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static void wcove_gpio_dbg_show(struct seq_file *s,
|
||||
struct gpio_chip *chip)
|
||||
{
|
||||
unsigned int ctlo, ctli, irq_mask, irq_status;
|
||||
struct wcove_gpio *wg = gpiochip_get_data(chip);
|
||||
int gpio, offset, group, ret = 0;
|
||||
|
||||
for (gpio = 0; gpio < WCOVE_GPIO_NUM; gpio++) {
|
||||
group = gpio < GROUP0_NR_IRQS ? 0 : 1;
|
||||
ret += regmap_read(wg->regmap, to_reg(gpio, CTRL_OUT), &ctlo);
|
||||
ret += regmap_read(wg->regmap, to_reg(gpio, CTRL_IN), &ctli);
|
||||
ret += regmap_read(wg->regmap, IRQ_MASK_BASE + group,
|
||||
&irq_mask);
|
||||
ret += regmap_read(wg->regmap, IRQ_STATUS_BASE + group,
|
||||
&irq_status);
|
||||
if (ret) {
|
||||
pr_err("Failed to read registers: ctrl out/in or irq status/mask\n");
|
||||
break;
|
||||
}
|
||||
|
||||
offset = gpio % 8;
|
||||
seq_printf(s, " gpio-%-2d %s %s %s %s ctlo=%2x,%s %s\n",
|
||||
gpio, ctlo & CTLO_DIR_OUT ? "out" : "in ",
|
||||
ctli & 0x1 ? "hi" : "lo",
|
||||
ctli & CTLI_INTCNT_NE ? "fall" : " ",
|
||||
ctli & CTLI_INTCNT_PE ? "rise" : " ",
|
||||
ctlo,
|
||||
irq_mask & BIT(offset) ? "mask " : "unmask",
|
||||
irq_status & BIT(offset) ? "pending" : " ");
|
||||
}
|
||||
}
|
||||
|
||||
static int wcove_gpio_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct intel_soc_pmic *pmic;
|
||||
struct wcove_gpio *wg;
|
||||
int virq, ret, irq;
|
||||
struct device *dev;
|
||||
|
||||
/*
|
||||
* This gpio platform device is created by a mfd device (see
|
||||
* drivers/mfd/intel_soc_pmic_bxtwc.c for details). Information
|
||||
* shared by all sub-devices created by the mfd device, the regmap
|
||||
* pointer for instance, is stored as driver data of the mfd device
|
||||
* driver.
|
||||
*/
|
||||
pmic = dev_get_drvdata(pdev->dev.parent);
|
||||
if (!pmic)
|
||||
return -ENODEV;
|
||||
|
||||
irq = platform_get_irq(pdev, 0);
|
||||
if (irq < 0)
|
||||
return irq;
|
||||
|
||||
dev = &pdev->dev;
|
||||
|
||||
wg = devm_kzalloc(dev, sizeof(*wg), GFP_KERNEL);
|
||||
if (!wg)
|
||||
return -ENOMEM;
|
||||
|
||||
wg->regmap_irq_chip = pmic->irq_chip_data_level2;
|
||||
|
||||
platform_set_drvdata(pdev, wg);
|
||||
|
||||
mutex_init(&wg->buslock);
|
||||
wg->chip.label = KBUILD_MODNAME;
|
||||
wg->chip.direction_input = wcove_gpio_dir_in;
|
||||
wg->chip.direction_output = wcove_gpio_dir_out;
|
||||
wg->chip.get = wcove_gpio_get;
|
||||
wg->chip.set = wcove_gpio_set;
|
||||
wg->chip.set_single_ended = wcove_gpio_set_single_ended,
|
||||
wg->chip.base = -1;
|
||||
wg->chip.ngpio = WCOVE_VGPIO_NUM;
|
||||
wg->chip.can_sleep = true;
|
||||
wg->chip.parent = pdev->dev.parent;
|
||||
wg->chip.dbg_show = wcove_gpio_dbg_show;
|
||||
wg->dev = dev;
|
||||
wg->regmap = pmic->regmap;
|
||||
|
||||
ret = devm_gpiochip_add_data(dev, &wg->chip, wg);
|
||||
if (ret) {
|
||||
dev_err(dev, "Failed to add gpiochip: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = gpiochip_irqchip_add(&wg->chip, &wcove_irqchip, 0,
|
||||
handle_simple_irq, IRQ_TYPE_NONE);
|
||||
if (ret) {
|
||||
dev_err(dev, "Failed to add irqchip: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
virq = regmap_irq_get_virq(wg->regmap_irq_chip, irq);
|
||||
if (virq < 0) {
|
||||
dev_err(dev, "Failed to get virq by irq %d\n", irq);
|
||||
return virq;
|
||||
}
|
||||
|
||||
ret = devm_request_threaded_irq(dev, virq, NULL,
|
||||
wcove_gpio_irq_handler, IRQF_ONESHOT, pdev->name, wg);
|
||||
if (ret) {
|
||||
dev_err(dev, "Failed to request irq %d\n", virq);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Whiskey Cove PMIC itself is a analog device(but with digital control
|
||||
* interface) providing power management support for other devices in
|
||||
* the accompanied SoC, so we have no .pm for Whiskey Cove GPIO driver.
|
||||
*/
|
||||
static struct platform_driver wcove_gpio_driver = {
|
||||
.driver = {
|
||||
.name = "bxt_wcove_gpio",
|
||||
},
|
||||
.probe = wcove_gpio_probe,
|
||||
};
|
||||
|
||||
module_platform_driver(wcove_gpio_driver);
|
||||
|
||||
MODULE_AUTHOR("Ajay Thomas <ajay.thomas.david.rajamanickam@intel.com>");
|
||||
MODULE_AUTHOR("Bin Gao <bin.gao@intel.com>");
|
||||
MODULE_DESCRIPTION("Intel Whiskey Cove GPIO Driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_ALIAS("platform:bxt_wcove_gpio");
|
||||
Loading…
Reference in New Issue