diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c
index 1f47d962e3a1..7037d3687e9f 100644
--- a/arch/arm/mach-ux500/board-mop500-uib.c
+++ b/arch/arm/mach-ux500/board-mop500-uib.c
@@ -13,6 +13,7 @@
 
 #include <mach/hardware.h>
 #include "board-mop500.h"
+#include "id.h"
 
 enum mop500_uib {
 	STUIB,
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
index 75d5b512a3d5..1c1609da76ce 100644
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -10,7 +10,8 @@
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <mach/hardware.h>
-#include <mach/id.h>
+
+#include "id.h"
 
 static void __iomem *l2x0_base;
 
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 218a6b1ada7e..d614d7150dcb 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -36,7 +36,9 @@
 
 #include "devices-db8500.h"
 #include "ste-dma40-db8500.h"
+
 #include "board-mop500.h"
+#include "id.h"
 
 /* minimum static i/o mapping required to boot U8500 platforms */
 static struct map_desc u8500_uart_io_desc[] __initdata = {
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 5dd90d31ffc3..506c5b2d0fad 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -28,6 +28,7 @@
 #include <mach/devices.h>
 
 #include "board-mop500.h"
+#include "id.h"
 
 void __iomem *_PRCMU_BASE;
 
diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c
index d1579920139f..9f951842e1e5 100644
--- a/arch/arm/mach-ux500/id.c
+++ b/arch/arm/mach-ux500/id.c
@@ -17,6 +17,8 @@
 #include <mach/hardware.h>
 #include <mach/setup.h>
 
+#include "id.h"
+
 struct dbx500_asic_id dbx500_id;
 
 static unsigned int ux500_read_asicid(phys_addr_t addr)
diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/id.h
similarity index 85%
rename from arch/arm/mach-ux500/include/mach/id.h
rename to arch/arm/mach-ux500/id.h
index 9c42642ab168..bcc58a8cccbc 100644
--- a/arch/arm/mach-ux500/include/mach/id.h
+++ b/arch/arm/mach-ux500/id.h
@@ -61,9 +61,14 @@ static inline bool __attribute_const__ cpu_is_u8540(void)
 	return dbx500_partnumber() == 0x8540;
 }
 
+static inline bool __attribute_const__ cpu_is_u8580(void)
+{
+	return dbx500_partnumber() == 0x8580;
+}
+
 static inline bool cpu_is_ux540_family(void)
 {
-	return cpu_is_u9540() || cpu_is_u8540();
+	return cpu_is_u9540() || cpu_is_u8540() || cpu_is_u8580();
 }
 
 /*
@@ -115,6 +120,20 @@ static inline bool cpu_is_u8500v20_or_later(void)
 	return (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11());
 }
 
+/*
+ * 8540 revisions
+ */
+
+static inline bool __attribute_const__ cpu_is_u8540v10(void)
+{
+	return cpu_is_u8540() && dbx500_revision() == 0xA0;
+}
+
+static inline bool __attribute_const__ cpu_is_u8580v10(void)
+{
+	return cpu_is_u8580() && dbx500_revision() == 0xA0;
+}
+
 static inline bool ux500_is_svp(void)
 {
 	return false;
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index 28d16e744bfd..5201ddace503 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -39,7 +39,6 @@
 
 #ifndef __ASSEMBLY__
 
-#include <mach/id.h>
 extern void __iomem *_PRCMU_BASE;
 
 #define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index b8adac93421f..18f7af339dc9 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -21,9 +21,12 @@
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
+
 #include <mach/hardware.h>
 #include <mach/setup.h>
 
+#include "id.h"
+
 /* This is called from headsmp.S to wakeup the secondary core */
 extern void u8500_secondary_startup(void);
 
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index aa2a78acb59e..a6af0b8732ba 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -17,6 +17,8 @@
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 
+#include "id.h"
+
 #ifdef CONFIG_HAVE_ARM_TWD
 static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer,
 			      U8500_TWD_BASE, IRQ_LOCALTIMER);
diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c
index 4f154bc0ebe4..523c9403bfce 100644
--- a/drivers/cpufreq/db8500-cpufreq.c
+++ b/drivers/cpufreq/db8500-cpufreq.c
@@ -167,9 +167,6 @@ static struct platform_driver db8500_cpufreq_plat_driver = {
 
 static int __init db8500_cpufreq_register(void)
 {
-	if (!cpu_is_u8500_family())
-		return -ENODEV;
-
 	pr_info("cpufreq for DB8500 started\n");
 	return platform_driver_register(&db8500_cpufreq_plat_driver);
 }
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 13f4ccf2612d..d9fedd4d9194 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -36,7 +36,6 @@
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/db8500-regs.h>
-#include <mach/id.h>
 #include "dbx500-prcmu-regs.h"
 
 /* Offset for the firmware version within the TCPM */
@@ -216,10 +215,8 @@
 #define PRCM_REQ_MB5_I2C_HW_BITS	(PRCM_REQ_MB5 + 0x1)
 #define PRCM_REQ_MB5_I2C_REG		(PRCM_REQ_MB5 + 0x2)
 #define PRCM_REQ_MB5_I2C_VAL		(PRCM_REQ_MB5 + 0x3)
-#define PRCMU_I2C_WRITE(slave) \
-	(((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0))
-#define PRCMU_I2C_READ(slave) \
-	(((slave) << 1) | BIT(0) | (cpu_is_u8500v2() ? BIT(6) : 0))
+#define PRCMU_I2C_WRITE(slave) (((slave) << 1) | BIT(6))
+#define PRCMU_I2C_READ(slave) (((slave) << 1) | BIT(0) | BIT(6))
 #define PRCMU_I2C_STOP_EN		BIT(3)
 
 /* Mailbox 5 ACKs */
@@ -1049,12 +1046,13 @@ int db8500_prcmu_get_ddr_opp(void)
  *
  * This function sets the operating point of the DDR.
  */
+static bool enable_set_ddr_opp;
 int db8500_prcmu_set_ddr_opp(u8 opp)
 {
 	if (opp < DDR_100_OPP || opp > DDR_25_OPP)
 		return -EINVAL;
 	/* Changing the DDR OPP can hang the hardware pre-v21 */
-	if (cpu_is_u8500v20_or_later() && !cpu_is_u8500v20())
+	if (enable_set_ddr_opp)
 		writeb(opp, PRCM_DDR_SUBSYS_APE_MINBW);
 
 	return 0;
@@ -2790,6 +2788,7 @@ void __init db8500_prcmu_early_init(void)
 		pr_err("prcmu: Unsupported chip version\n");
 		BUG();
 	}
+	tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE);
 
 	spin_lock_init(&mb0_transfer.lock);
 	spin_lock_init(&mb0_transfer.dbb_irqs_lock);
@@ -3104,9 +3103,6 @@ static int db8500_prcmu_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	int irq = 0, err = 0, i;
 
-	if (ux500_is_svp())
-		return -ENODEV;
-
 	init_prcm_registers();
 
 	/* Clean up the mailbox interrupts after pre-kernel code. */
@@ -3135,8 +3131,7 @@ static int db8500_prcmu_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (cpu_is_u8500v20_or_later())
-		prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
+	prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
 
 	db8500_prcmu_update_cpufreq();
 
diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h
index 6ee4247df11e..a65deddede2f 100644
--- a/include/linux/mfd/db8500-prcmu.h
+++ b/include/linux/mfd/db8500-prcmu.h
@@ -16,12 +16,6 @@
 /*
  * Registers
  */
-#define DB8500_PRCM_GPIOCR 0x138
-#define DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0	BIT(0)
-#define DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD	BIT(9)
-#define DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1	BIT(11)
-#define DB8500_PRCM_GPIOCR_SPI2_SELECT		BIT(23)
-
 #define DB8500_PRCM_LINE_VALUE 0x170
 #define DB8500_PRCM_LINE_VALUE_HSI_CAWAKE0	BIT(3)
 
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
index c202d6c4d879..155280642583 100644
--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -218,8 +218,6 @@ enum ddr_pwrst {
 
 #if defined(CONFIG_UX500_SOC_DB8500)
 
-#include <mach/id.h>
-
 static inline void __init prcmu_early_init(void)
 {
 	return db8500_prcmu_early_init();
@@ -626,85 +624,6 @@ static inline void prcmu_clear(unsigned int reg, u32 bits)
 	prcmu_write_masked(reg, bits, 0);
 }
 
-#if defined(CONFIG_UX500_SOC_DB8500)
-
-/**
- * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1.
- */
-static inline void prcmu_enable_spi2(void)
-{
-	if (cpu_is_u8500())
-		prcmu_set(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT);
-}
-
-/**
- * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1.
- */
-static inline void prcmu_disable_spi2(void)
-{
-	if (cpu_is_u8500())
-		prcmu_clear(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT);
-}
-
-/**
- * prcmu_enable_stm_mod_uart - Enables pin muxing for STMMOD
- * and UARTMOD on OtherAlternateC3.
- */
-static inline void prcmu_enable_stm_mod_uart(void)
-{
-	if (cpu_is_u8500()) {
-		prcmu_set(DB8500_PRCM_GPIOCR,
-			(DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 |
-			 DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0));
-	}
-}
-
-/**
- * prcmu_disable_stm_mod_uart - Disables pin muxing for STMMOD
- * and UARTMOD on OtherAlternateC3.
- */
-static inline void prcmu_disable_stm_mod_uart(void)
-{
-	if (cpu_is_u8500()) {
-		prcmu_clear(DB8500_PRCM_GPIOCR,
-			(DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 |
-			 DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0));
-	}
-}
-
-/**
- * prcmu_enable_stm_ape - Enables pin muxing for STM APE on OtherAlternateC1.
- */
-static inline void prcmu_enable_stm_ape(void)
-{
-	if (cpu_is_u8500()) {
-		prcmu_set(DB8500_PRCM_GPIOCR,
-			DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD);
-	}
-}
-
-/**
- * prcmu_disable_stm_ape - Disables pin muxing for STM APE on OtherAlternateC1.
- */
-static inline void prcmu_disable_stm_ape(void)
-{
-	if (cpu_is_u8500()) {
-		prcmu_clear(DB8500_PRCM_GPIOCR,
-			DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD);
-	}
-}
-
-#else
-
-static inline void prcmu_enable_spi2(void) {}
-static inline void prcmu_disable_spi2(void) {}
-static inline void prcmu_enable_stm_mod_uart(void) {}
-static inline void prcmu_disable_stm_mod_uart(void) {}
-static inline void prcmu_enable_stm_ape(void) {}
-static inline void prcmu_disable_stm_ape(void) {}
-
-#endif
-
 /* PRCMU QoS APE OPP class */
 #define PRCMU_QOS_APE_OPP 1
 #define PRCMU_QOS_DDR_OPP 2