From 0b3292852863215825f88905b9dbafc3101e1d7e Mon Sep 17 00:00:00 2001 From: Codrin Ciubotariu Date: Fri, 1 Nov 2019 11:20:31 +0200 Subject: [PATCH] pinctrl: at91: Enable slewrate by default on SAM9X60 On SAM9X60, slewrate should be enabled on pins with a switching frequency below 50Mhz. Since most of our pins do not exceed this value, we enable slewrate by default. Pins with a switching value that exceeds 50Mhz will have to explicitly disable slewrate. This patch changes the ABI. However, the slewrate macros are only used by SAM9X60 and, at this moment, there are no device-tree files available for this platform. Suggested-by: Ludovic Desroches Signed-off-by: Codrin Ciubotariu Link: https://lore.kernel.org/r/20191101092031.24896-1-codrin.ciubotariu@microchip.com Acked-by: Ludovic Desroches Reviewed-by: Claudiu Beznea Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-at91.c | 4 ++-- include/dt-bindings/pinctrl/at91.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c index 117075b5798f..c135149e84e9 100644 --- a/drivers/pinctrl/pinctrl-at91.c +++ b/drivers/pinctrl/pinctrl-at91.c @@ -85,8 +85,8 @@ enum drive_strength_bit { DRIVE_STRENGTH_SHIFT) enum slewrate_bit { - SLEWRATE_BIT_DIS, SLEWRATE_BIT_ENA, + SLEWRATE_BIT_DIS, }; #define SLEWRATE_BIT_MSK(name) (SLEWRATE_BIT_##name << SLEWRATE_SHIFT) @@ -669,7 +669,7 @@ static void at91_mux_sam9x60_set_slewrate(void __iomem *pio, unsigned pin, { unsigned int tmp; - if (setting < SLEWRATE_BIT_DIS || setting > SLEWRATE_BIT_ENA) + if (setting < SLEWRATE_BIT_ENA || setting > SLEWRATE_BIT_DIS) return; tmp = readl_relaxed(pio + SAM9X60_PIO_SLEWR); diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h index 3831f91fb3ba..e8e117306b1b 100644 --- a/include/dt-bindings/pinctrl/at91.h +++ b/include/dt-bindings/pinctrl/at91.h @@ -27,8 +27,8 @@ #define AT91_PINCTRL_DRIVE_STRENGTH_MED (0x2 << 5) #define AT91_PINCTRL_DRIVE_STRENGTH_HI (0x3 << 5) -#define AT91_PINCTRL_SLEWRATE_DIS (0x0 << 9) -#define AT91_PINCTRL_SLEWRATE_ENA (0x1 << 9) +#define AT91_PINCTRL_SLEWRATE_ENA (0x0 << 9) +#define AT91_PINCTRL_SLEWRATE_DIS (0x1 << 9) #define AT91_PIOA 0 #define AT91_PIOB 1