ASoC: jz4740: Improve build test coverage

Allow the jz4740 audio drivers to be build when CONFIG_COMPILE_TEST is selected.
This should improve the build test coverage. There is one small piece of
platform dependent code in the jz4740-i2s driver. It uses the DMA request type
constants which are defined in a platform specific header. We can solve this by
moving them from the platform specific header to the I2S driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
This commit is contained in:
Lars-Peter Clausen 2014-04-22 22:46:36 +02:00 committed by Mark Brown
parent 218e18a372
commit 0aa2a15a7b
3 changed files with 11 additions and 7 deletions

View File

@ -22,8 +22,6 @@ enum jz4740_dma_request_type {
JZ4740_DMA_TYPE_UART_RECEIVE = 21,
JZ4740_DMA_TYPE_SPI_TRANSMIT = 22,
JZ4740_DMA_TYPE_SPI_RECEIVE = 23,
JZ4740_DMA_TYPE_AIC_TRANSMIT = 24,
JZ4740_DMA_TYPE_AIC_RECEIVE = 25,
JZ4740_DMA_TYPE_MMC_TRANSMIT = 26,
JZ4740_DMA_TYPE_MMC_RECEIVE = 27,
JZ4740_DMA_TYPE_TCU = 28,

View File

@ -1,24 +1,29 @@
config SND_JZ4740_SOC
tristate "SoC Audio for Ingenic JZ4740 SoC"
depends on MACH_JZ4740 && SND_SOC
depends on MACH_JZ4740 || COMPILE_TEST
select SND_SOC_GENERIC_DMAENGINE_PCM
help
Say Y or M if you want to add support for codecs attached to
the JZ4740 I2S interface. You will also need to select the audio
interfaces to support below.
if SND_JZ4740_SOC
config SND_JZ4740_SOC_I2S
depends on SND_JZ4740_SOC
tristate "SoC Audio (I2S protocol) for Ingenic JZ4740 SoC"
depends on HAS_IOMEM
help
Say Y if you want to use I2S protocol and I2S codec on Ingenic JZ4740
based boards.
config SND_JZ4740_SOC_QI_LB60
tristate "SoC Audio support for Qi LB60"
depends on SND_JZ4740_SOC && JZ4740_QI_LB60
depends on HAS_IOMEM
depends on JZ4740_QI_LB60 || COMPILE_TEST
select SND_JZ4740_SOC_I2S
select SND_SOC_JZ4740_CODEC
help
Say Y if you want to add support for ASoC audio on the Qi LB60 board
a.k.a Qi Ben NanoNote.
endif

View File

@ -31,10 +31,11 @@
#include <sound/initval.h>
#include <sound/dmaengine_pcm.h>
#include <asm/mach-jz4740/dma.h>
#include "jz4740-i2s.h"
#define JZ4740_DMA_TYPE_AIC_TRANSMIT 24
#define JZ4740_DMA_TYPE_AIC_RECEIVE 25
#define JZ_REG_AIC_CONF 0x00
#define JZ_REG_AIC_CTRL 0x04
#define JZ_REG_AIC_I2S_FMT 0x10