gpio: pca953x: Clear irq trigger type on irq shutdown

The driver stores the result of irq_set_type() in the internal variables
irq_trig_raise and irq_trig_fall, which later are used to determine
the GPIOs that must be re-configured as input. These variables retain their
value between gpiolib's  export / unexport, resulting in an incorrect
state in some cases. The corresponding bits in the variables
irq_trig_raise and irq_trig_fall should be cleared in irq_shutdown().

Signed-off-by: Denis Grigoryev <grigoryev@fastwel.ru>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Grigoryev Denis 2018-05-04 16:53:18 +00:00 committed by Linus Walleij
parent 060f3ebf6a
commit 0a70fe00ef
1 changed files with 10 additions and 0 deletions

View File

@ -532,6 +532,15 @@ static int pca953x_irq_set_type(struct irq_data *d, unsigned int type)
return 0;
}
static void pca953x_irq_shutdown(struct irq_data *d)
{
struct pca953x_chip *chip = irq_data_get_irq_chip_data(d);
u8 mask = 1 << (d->hwirq % BANK_SZ);
chip->irq_trig_raise[d->hwirq / BANK_SZ] &= ~mask;
chip->irq_trig_fall[d->hwirq / BANK_SZ] &= ~mask;
}
static struct irq_chip pca953x_irq_chip = {
.name = "pca953x",
.irq_mask = pca953x_irq_mask,
@ -539,6 +548,7 @@ static struct irq_chip pca953x_irq_chip = {
.irq_bus_lock = pca953x_irq_bus_lock,
.irq_bus_sync_unlock = pca953x_irq_bus_sync_unlock,
.irq_set_type = pca953x_irq_set_type,
.irq_shutdown = pca953x_irq_shutdown,
};
static bool pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending)