net: phy: Add Wake-on-LAN driver for Microsemi PHYs.
Wake-on-LAN (WoL) is an Ethernet networking standard that allows a computer/device to be turned on or awakened by a network message. VSC8531 PHY can support this feature configure by driver set function. WoL status get by driver get function. Tested on Beaglebone Black with VSC 8531 PHY. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
ed2eb0fb87
commit
0a55c12f97
|
@ -13,6 +13,7 @@
|
|||
#include <linux/phy.h>
|
||||
#include <linux/of.h>
|
||||
#include <dt-bindings/net/mscc-phy-vsc8531.h>
|
||||
#include <linux/netdevice.h>
|
||||
|
||||
enum rgmii_rx_clock_delay {
|
||||
RGMII_RX_CLK_DELAY_0_2_NS = 0,
|
||||
|
@ -37,6 +38,7 @@ enum rgmii_rx_clock_delay {
|
|||
|
||||
#define MII_VSC85XX_INT_MASK 25
|
||||
#define MII_VSC85XX_INT_MASK_MASK 0xa000
|
||||
#define MII_VSC85XX_INT_MASK_WOL 0x0040
|
||||
#define MII_VSC85XX_INT_STATUS 26
|
||||
|
||||
#define MSCC_PHY_WOL_MAC_CONTROL 27
|
||||
|
@ -52,6 +54,17 @@ enum rgmii_rx_clock_delay {
|
|||
#define RGMII_RX_CLK_DELAY_MASK 0x0070
|
||||
#define RGMII_RX_CLK_DELAY_POS 4
|
||||
|
||||
#define MSCC_PHY_WOL_LOWER_MAC_ADDR 21
|
||||
#define MSCC_PHY_WOL_MID_MAC_ADDR 22
|
||||
#define MSCC_PHY_WOL_UPPER_MAC_ADDR 23
|
||||
#define MSCC_PHY_WOL_LOWER_PASSWD 24
|
||||
#define MSCC_PHY_WOL_MID_PASSWD 25
|
||||
#define MSCC_PHY_WOL_UPPER_PASSWD 26
|
||||
|
||||
#define MSCC_PHY_WOL_MAC_CONTROL 27
|
||||
#define SECURE_ON_ENABLE 0x8000
|
||||
#define SECURE_ON_PASSWD_LEN_4 0x4000
|
||||
|
||||
/* Microsemi PHY ID's */
|
||||
#define PHY_ID_VSC8531 0x00070570
|
||||
#define PHY_ID_VSC8541 0x00070770
|
||||
|
@ -81,6 +94,117 @@ static int vsc85xx_phy_page_set(struct phy_device *phydev, u8 page)
|
|||
return rc;
|
||||
}
|
||||
|
||||
static int vsc85xx_wol_set(struct phy_device *phydev,
|
||||
struct ethtool_wolinfo *wol)
|
||||
{
|
||||
int rc;
|
||||
u16 reg_val;
|
||||
u8 i;
|
||||
u16 pwd[3] = {0, 0, 0};
|
||||
struct ethtool_wolinfo *wol_conf = wol;
|
||||
u8 *mac_addr = phydev->attached_dev->dev_addr;
|
||||
|
||||
mutex_lock(&phydev->lock);
|
||||
rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_EXTENDED_2);
|
||||
if (rc != 0)
|
||||
goto out_unlock;
|
||||
|
||||
if (wol->wolopts & WAKE_MAGIC) {
|
||||
/* Store the device address for the magic packet */
|
||||
for (i = 0; i < ARRAY_SIZE(pwd); i++)
|
||||
pwd[i] = mac_addr[5 - (i * 2 + 1)] << 8 |
|
||||
mac_addr[5 - i * 2];
|
||||
phy_write(phydev, MSCC_PHY_WOL_LOWER_MAC_ADDR, pwd[0]);
|
||||
phy_write(phydev, MSCC_PHY_WOL_MID_MAC_ADDR, pwd[1]);
|
||||
phy_write(phydev, MSCC_PHY_WOL_UPPER_MAC_ADDR, pwd[2]);
|
||||
} else {
|
||||
phy_write(phydev, MSCC_PHY_WOL_LOWER_MAC_ADDR, 0);
|
||||
phy_write(phydev, MSCC_PHY_WOL_MID_MAC_ADDR, 0);
|
||||
phy_write(phydev, MSCC_PHY_WOL_UPPER_MAC_ADDR, 0);
|
||||
}
|
||||
|
||||
if (wol_conf->wolopts & WAKE_MAGICSECURE) {
|
||||
for (i = 0; i < ARRAY_SIZE(pwd); i++)
|
||||
pwd[i] = wol_conf->sopass[5 - (i * 2 + 1)] << 8 |
|
||||
wol_conf->sopass[5 - i * 2];
|
||||
phy_write(phydev, MSCC_PHY_WOL_LOWER_PASSWD, pwd[0]);
|
||||
phy_write(phydev, MSCC_PHY_WOL_MID_PASSWD, pwd[1]);
|
||||
phy_write(phydev, MSCC_PHY_WOL_UPPER_PASSWD, pwd[2]);
|
||||
} else {
|
||||
phy_write(phydev, MSCC_PHY_WOL_LOWER_PASSWD, 0);
|
||||
phy_write(phydev, MSCC_PHY_WOL_MID_PASSWD, 0);
|
||||
phy_write(phydev, MSCC_PHY_WOL_UPPER_PASSWD, 0);
|
||||
}
|
||||
|
||||
reg_val = phy_read(phydev, MSCC_PHY_WOL_MAC_CONTROL);
|
||||
if (wol_conf->wolopts & WAKE_MAGICSECURE)
|
||||
reg_val |= SECURE_ON_ENABLE;
|
||||
else
|
||||
reg_val &= ~SECURE_ON_ENABLE;
|
||||
phy_write(phydev, MSCC_PHY_WOL_MAC_CONTROL, reg_val);
|
||||
|
||||
rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_STANDARD);
|
||||
if (rc != 0)
|
||||
goto out_unlock;
|
||||
|
||||
if (wol->wolopts & WAKE_MAGIC) {
|
||||
/* Enable the WOL interrupt */
|
||||
reg_val = phy_read(phydev, MII_VSC85XX_INT_MASK);
|
||||
reg_val |= MII_VSC85XX_INT_MASK_WOL;
|
||||
rc = phy_write(phydev, MII_VSC85XX_INT_MASK, reg_val);
|
||||
if (rc != 0)
|
||||
goto out_unlock;
|
||||
} else {
|
||||
/* Disable the WOL interrupt */
|
||||
reg_val = phy_read(phydev, MII_VSC85XX_INT_MASK);
|
||||
reg_val &= (~MII_VSC85XX_INT_MASK_WOL);
|
||||
rc = phy_write(phydev, MII_VSC85XX_INT_MASK, reg_val);
|
||||
if (rc != 0)
|
||||
goto out_unlock;
|
||||
}
|
||||
/* Clear WOL iterrupt status */
|
||||
reg_val = phy_read(phydev, MII_VSC85XX_INT_STATUS);
|
||||
|
||||
out_unlock:
|
||||
mutex_unlock(&phydev->lock);
|
||||
|
||||
return rc;
|
||||
}
|
||||
|
||||
static void vsc85xx_wol_get(struct phy_device *phydev,
|
||||
struct ethtool_wolinfo *wol)
|
||||
{
|
||||
int rc;
|
||||
u16 reg_val;
|
||||
u8 i;
|
||||
u16 pwd[3] = {0, 0, 0};
|
||||
struct ethtool_wolinfo *wol_conf = wol;
|
||||
|
||||
mutex_lock(&phydev->lock);
|
||||
rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_EXTENDED_2);
|
||||
if (rc != 0)
|
||||
goto out_unlock;
|
||||
|
||||
reg_val = phy_read(phydev, MSCC_PHY_WOL_MAC_CONTROL);
|
||||
if (reg_val & SECURE_ON_ENABLE)
|
||||
wol_conf->wolopts |= WAKE_MAGICSECURE;
|
||||
if (wol_conf->wolopts & WAKE_MAGICSECURE) {
|
||||
pwd[0] = phy_read(phydev, MSCC_PHY_WOL_LOWER_PASSWD);
|
||||
pwd[1] = phy_read(phydev, MSCC_PHY_WOL_MID_PASSWD);
|
||||
pwd[2] = phy_read(phydev, MSCC_PHY_WOL_UPPER_PASSWD);
|
||||
for (i = 0; i < ARRAY_SIZE(pwd); i++) {
|
||||
wol_conf->sopass[5 - i * 2] = pwd[i] & 0x00ff;
|
||||
wol_conf->sopass[5 - (i * 2 + 1)] = (pwd[i] & 0xff00)
|
||||
>> 8;
|
||||
}
|
||||
}
|
||||
|
||||
rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_STANDARD);
|
||||
|
||||
out_unlock:
|
||||
mutex_unlock(&phydev->lock);
|
||||
}
|
||||
|
||||
static u8 edge_rate_magic_get(u16 vddmac,
|
||||
int slowdown)
|
||||
{
|
||||
|
@ -301,6 +425,8 @@ static struct phy_driver vsc85xx_driver[] = {
|
|||
.suspend = &genphy_suspend,
|
||||
.resume = &genphy_resume,
|
||||
.probe = &vsc85xx_probe,
|
||||
.set_wol = &vsc85xx_wol_set,
|
||||
.get_wol = &vsc85xx_wol_get,
|
||||
},
|
||||
{
|
||||
.phy_id = PHY_ID_VSC8541,
|
||||
|
@ -318,6 +444,8 @@ static struct phy_driver vsc85xx_driver[] = {
|
|||
.suspend = &genphy_suspend,
|
||||
.resume = &genphy_resume,
|
||||
.probe = &vsc85xx_probe,
|
||||
.set_wol = &vsc85xx_wol_set,
|
||||
.get_wol = &vsc85xx_wol_get,
|
||||
}
|
||||
|
||||
};
|
||||
|
|
Loading…
Reference in New Issue