From 0a4355c2b7f8ecd5e61cc262ecdbd4a2cce1ea7e Mon Sep 17 00:00:00 2001 From: Joakim Zhang Date: Tue, 8 Jun 2021 11:15:33 +0800 Subject: [PATCH] net: phy: realtek: add dt property to disable CLKOUT clock CLKOUT is enabled by default after PHY hardware reset, this patch adds "realtek,clkout-disable" property for user to disable CLKOUT clock to save PHY power. Per RTL8211F guide, a PHY reset should be issued after setting these bits in PHYCR2 register. After this patch, CLKOUT clock output to be disabled. Signed-off-by: Joakim Zhang Signed-off-by: David S. Miller --- drivers/net/phy/realtek.c | 42 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 41 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 821e85a97367..ca258f2a9613 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -8,6 +8,7 @@ * Copyright (c) 2004 Freescale Semiconductor, Inc. */ #include +#include #include #include #include @@ -27,6 +28,7 @@ #define RTL821x_PAGE_SELECT 0x1f #define RTL8211F_PHYCR1 0x18 +#define RTL8211F_PHYCR2 0x19 #define RTL8211F_INSR 0x1d #define RTL8211F_TX_DELAY BIT(8) @@ -40,6 +42,8 @@ #define RTL8211E_TX_DELAY BIT(12) #define RTL8211E_RX_DELAY BIT(11) +#define RTL8211F_CLKOUT_EN BIT(0) + #define RTL8201F_ISR 0x1e #define RTL8201F_ISR_ANERR BIT(15) #define RTL8201F_ISR_DUPLEX BIT(13) @@ -71,6 +75,10 @@ MODULE_DESCRIPTION("Realtek PHY driver"); MODULE_AUTHOR("Johnson Leung"); MODULE_LICENSE("GPL"); +struct rtl821x_priv { + u16 phycr2; +}; + static int rtl821x_read_page(struct phy_device *phydev) { return __phy_read(phydev, RTL821x_PAGE_SELECT); @@ -81,6 +89,28 @@ static int rtl821x_write_page(struct phy_device *phydev, int page) return __phy_write(phydev, RTL821x_PAGE_SELECT, page); } +static int rtl821x_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct rtl821x_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->phycr2 = phy_read_paged(phydev, 0xa43, RTL8211F_PHYCR2); + if (priv->phycr2 < 0) + return priv->phycr2; + + priv->phycr2 &= RTL8211F_CLKOUT_EN; + if (of_property_read_bool(dev->of_node, "realtek,clkout-disable")) + priv->phycr2 &= ~RTL8211F_CLKOUT_EN; + + phydev->priv = priv; + + return 0; +} + static int rtl8201_ack_interrupt(struct phy_device *phydev) { int err; @@ -291,6 +321,7 @@ static int rtl8211c_config_init(struct phy_device *phydev) static int rtl8211f_config_init(struct phy_device *phydev) { + struct rtl821x_priv *priv = phydev->priv; struct device *dev = &phydev->mdio.dev; u16 val_txdly, val_rxdly; u16 val; @@ -354,7 +385,15 @@ static int rtl8211f_config_init(struct phy_device *phydev) val_rxdly ? "enabled" : "disabled"); } - return 0; + ret = phy_modify_paged(phydev, 0xa43, RTL8211F_PHYCR2, + RTL8211F_CLKOUT_EN, priv->phycr2); + if (ret < 0) { + dev_err(dev, "clkout configuration failed: %pe\n", + ERR_PTR(ret)); + return ret; + } + + return genphy_soft_reset(phydev); } static int rtl8211e_config_init(struct phy_device *phydev) @@ -847,6 +886,7 @@ static struct phy_driver realtek_drvs[] = { }, { PHY_ID_MATCH_EXACT(0x001cc916), .name = "RTL8211F Gigabit Ethernet", + .probe = rtl821x_probe, .config_init = &rtl8211f_config_init, .read_status = rtlgen_read_status, .config_intr = &rtl8211f_config_intr,