arm64: dts: mediatek: mt6795: Add support for APDMA and wire up UART DMAs
This SoC has a DMA controller with tx/rx channels for all of the UART controller IPs: add the apdma node and wire up the DMAs on all controllers. When one of the UART controllers is used as a serial console, the DMA will be automatically ignored. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221027095504.37432-4-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This commit is contained in:
parent
12a36f028a
commit
09608ccc8a
|
@ -316,6 +316,8 @@
|
|||
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
|
||||
clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
|
||||
clock-names = "baud", "bus";
|
||||
dmas = <&apdma 0>, <&apdma 1>;
|
||||
dma-names = "tx", "rx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
@ -326,9 +328,37 @@
|
|||
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
|
||||
clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
|
||||
clock-names = "baud", "bus";
|
||||
dmas = <&apdma 2>, <&apdma 3>;
|
||||
dma-names = "tx", "rx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
apdma: dma-controller@11000380 {
|
||||
compatible = "mediatek,mt6795-uart-dma",
|
||||
"mediatek,mt6577-uart-dma";
|
||||
reg = <0 0x11000380 0 0x60>,
|
||||
<0 0x11000400 0 0x60>,
|
||||
<0 0x11000480 0 0x60>,
|
||||
<0 0x11000500 0 0x60>,
|
||||
<0 0x11000580 0 0x60>,
|
||||
<0 0x11000600 0 0x60>,
|
||||
<0 0x11000680 0 0x60>,
|
||||
<0 0x11000700 0 0x60>;
|
||||
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
|
||||
<GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
|
||||
<GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
|
||||
<GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
|
||||
<GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
|
||||
<GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
|
||||
<GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
|
||||
<GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
|
||||
dma-requests = <8>;
|
||||
clocks = <&pericfg CLK_PERI_AP_DMA>;
|
||||
clock-names = "apdma";
|
||||
mediatek,dma-33bits;
|
||||
#dma-cells = <1>;
|
||||
};
|
||||
|
||||
uart2: serial@11004000 {
|
||||
compatible = "mediatek,mt6795-uart",
|
||||
"mediatek,mt6577-uart";
|
||||
|
@ -336,6 +366,8 @@
|
|||
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
|
||||
clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
|
||||
clock-names = "baud", "bus";
|
||||
dmas = <&apdma 4>, <&apdma 5>;
|
||||
dma-names = "tx", "rx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
@ -346,6 +378,8 @@
|
|||
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
|
||||
clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
|
||||
clock-names = "baud", "bus";
|
||||
dmas = <&apdma 6>, <&apdma 7>;
|
||||
dma-names = "tx", "rx";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
Loading…
Reference in New Issue