Merge branch 'irqchip/stacked-omap' into irqchip/core

This commit is contained in:
Jason Cooper 2015-04-10 22:57:56 +00:00
commit 07c523f149
30 changed files with 378 additions and 280 deletions

View File

@ -56,11 +56,6 @@ Optional
regions, used when the GIC doesn't have banked registers. The offset is
cpu-offset * cpu-nr.
- arm,routable-irqs : Total number of gic irq inputs which are not directly
connected from the peripherals, but are routed dynamically
by a crossbar/multiplexer preceding the GIC. The GIC irq
input line is assigned dynamically when the corresponding
peripheral's crossbar line is mapped.
Example:
intc: interrupt-controller@fff11000 {
@ -68,7 +63,6 @@ Example:
#interrupt-cells = <3>;
#address-cells = <1>;
interrupt-controller;
arm,routable-irqs = <160>;
reg = <0xfff11000 0x1000>,
<0xfff10100 0x100>;
};

View File

@ -9,7 +9,9 @@ inputs.
Required properties:
- compatible : Should be "ti,irq-crossbar"
- reg: Base address and the size of the crossbar registers.
- ti,max-irqs: Total number of irqs available at the interrupt controller.
- interrupt-controller: indicates that this block is an interrupt controller.
- interrupt-parent: the interrupt controller this block is connected to.
- ti,max-irqs: Total number of irqs available at the parent interrupt controller.
- ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed.
- ti,reg-size: Size of a individual register in bytes. Every individual
register is assumed to be of same size. Valid sizes are 1, 2, 4.
@ -27,13 +29,13 @@ Optional properties:
when the interrupt controller irq is unused (when not provided, default is 0)
Examples:
crossbar_mpu: @4a020000 {
crossbar_mpu: crossbar@4a002a48 {
compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>;
ti,max-irqs = <160>;
ti,max-crossbar-sources = <400>;
ti,reg-size = <2>;
ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
ti,irqs-skip = <10 133 139 140>;
};
@ -44,10 +46,6 @@ Documentation/devicetree/bindings/arm/gic.txt for further details.
An interrupt consumer on an SoC using crossbar will use:
interrupts = <GIC_SPI request_number interrupt_level>
When the request number is between 0 to that described by
"ti,max-crossbar-sources", it is assumed to be a crossbar mapping. If the
request_number is greater than "ti,max-crossbar-sources", then it is mapped as a
quirky hardware mapping direct to GIC.
Example:
device_x@0x4a023000 {
@ -55,9 +53,3 @@ Example:
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
...
};
device_y@0x4a033000 {
/* Direct mapped GIC SPI 1 used */
interrupts = <GIC_SPI DIRECT_IRQ(1) IRQ_TYPE_LEVEL_HIGH>;
...
};

View File

@ -0,0 +1,33 @@
TI OMAP4 Wake-up Generator
All TI OMAP4/5 (and their derivatives) an interrupt controller that
routes interrupts to the GIC, and also serves as a wakeup source. It
is also referred to as "WUGEN-MPU", hence the name of the binding.
Reguired properties:
- compatible : should contain at least "ti,omap4-wugen-mpu" or
"ti,omap5-wugen-mpu"
- reg : Specifies base physical address and size of the registers.
- interrupt-controller : Identifies the node as an interrupt controller.
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value must be 3.
- interrupt-parent : a phandle to the GIC these interrupts are routed
to.
Notes:
- Because this HW ultimately routes interrupts to the GIC, the
interrupt specifier must be that of the GIC.
- Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs
are explicitly forbiden.
Example:
wakeupgen: interrupt-controller@48281000 {
compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x48281000 0x1000>;
interrupt-parent = <&gic>;
};

View File

@ -15,7 +15,7 @@
/ {
compatible = "ti,am4372", "ti,am43";
interrupt-parent = <&gic>;
interrupt-parent = <&wakeupgen>;
aliases {
@ -48,6 +48,15 @@
#interrupt-cells = <3>;
reg = <0x48241000 0x1000>,
<0x48240100 0x0100>;
interrupt-parent = <&gic>;
};
wakeupgen: interrupt-controller@48281000 {
compatible = "ti,omap4-wugen-mpu";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x48281000 0x1000>;
interrupt-parent = <&gic>;
};
l2-cache-controller@48242000 {

View File

@ -352,7 +352,6 @@
reg = <0x24>;
compatible = "ti,tps65218";
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;

View File

@ -392,7 +392,6 @@
tps@24 {
compatible = "ti,tps65218";
reg = <0x24>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;

View File

@ -369,7 +369,6 @@
reg = <0x24>;
compatible = "ti,tps65218";
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;

View File

@ -454,7 +454,6 @@
mcp_rtc: rtc@6f {
compatible = "microchip,mcp7941x";
reg = <0x6f>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>; /* IRQ_SYS_1N */
pinctrl-names = "default";
@ -477,7 +476,7 @@
&uart3 {
status = "okay";
interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
<&dra7_pmx_core 0x248>;
pinctrl-names = "default";

View File

@ -446,7 +446,7 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
<&dra7_pmx_core 0x3e0>;
};

View File

@ -13,14 +13,13 @@
#include "skeleton.dtsi"
#define MAX_SOURCES 400
#define DIRECT_IRQ(irq) (MAX_SOURCES + irq)
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ti,dra7xx";
interrupt-parent = <&gic>;
interrupt-parent = <&crossbar_mpu>;
aliases {
i2c0 = &i2c1;
@ -50,18 +49,27 @@
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
interrupt-parent = <&gic>;
};
gic: interrupt-controller@48211000 {
compatible = "arm,cortex-a15-gic";
interrupt-controller;
#interrupt-cells = <3>;
arm,routable-irqs = <192>;
reg = <0x48211000 0x1000>,
<0x48212000 0x1000>,
<0x48214000 0x2000>,
<0x48216000 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
interrupt-parent = <&gic>;
};
wakeupgen: interrupt-controller@48281000 {
compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x48281000 0x1000>;
interrupt-parent = <&gic>;
};
/*
@ -91,8 +99,8 @@
ti,hwmods = "l3_main_1", "l3_main_2";
reg = <0x44000000 0x1000000>,
<0x45000000 0x1000>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI DIRECT_IRQ(10) IRQ_TYPE_LEVEL_HIGH>;
interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
prm: prm@4ae06000 {
compatible = "ti,dra7-prm";
@ -344,7 +352,7 @@
uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
reg = <0x4806a000 0x100>;
interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
status = "disabled";
@ -355,7 +363,7 @@
uart2: serial@4806c000 {
compatible = "ti,omap4-uart";
reg = <0x4806c000 0x100>;
interrupts-extended = <&gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
status = "disabled";
@ -366,7 +374,7 @@
uart3: serial@48020000 {
compatible = "ti,omap4-uart";
reg = <0x48020000 0x100>;
interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
status = "disabled";
@ -377,7 +385,7 @@
uart4: serial@4806e000 {
compatible = "ti,omap4-uart";
reg = <0x4806e000 0x100>;
interrupts-extended = <&gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
status = "disabled";
@ -388,7 +396,7 @@
uart5: serial@48066000 {
compatible = "ti,omap4-uart";
reg = <0x48066000 0x100>;
interrupts-extended = <&gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart5";
clock-frequency = <48000000>;
status = "disabled";
@ -399,7 +407,7 @@
uart6: serial@48068000 {
compatible = "ti,omap4-uart";
reg = <0x48068000 0x100>;
interrupts-extended = <&gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart6";
clock-frequency = <48000000>;
status = "disabled";
@ -410,7 +418,7 @@
uart7: serial@48420000 {
compatible = "ti,omap4-uart";
reg = <0x48420000 0x100>;
interrupts-extended = <&gic GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart7";
clock-frequency = <48000000>;
status = "disabled";
@ -419,7 +427,7 @@
uart8: serial@48422000 {
compatible = "ti,omap4-uart";
reg = <0x48422000 0x100>;
interrupts-extended = <&gic GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart8";
clock-frequency = <48000000>;
status = "disabled";
@ -428,7 +436,7 @@
uart9: serial@48424000 {
compatible = "ti,omap4-uart";
reg = <0x48424000 0x100>;
interrupts-extended = <&gic GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart9";
clock-frequency = <48000000>;
status = "disabled";
@ -437,7 +445,7 @@
uart10: serial@4ae2b000 {
compatible = "ti,omap4-uart";
reg = <0x4ae2b000 0x100>;
interrupts-extended = <&gic GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart10";
clock-frequency = <48000000>;
status = "disabled";
@ -1337,9 +1345,12 @@
status = "disabled";
};
crossbar_mpu: crossbar@4a020000 {
crossbar_mpu: crossbar@4a002a48 {
compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>;
interrupt-controller;
interrupt-parent = <&wakeupgen>;
#interrupt-cells = <3>;
ti,max-irqs = <160>;
ti,max-crossbar-sources = <MAX_SOURCES>;
ti,reg-size = <2>;

View File

@ -160,7 +160,6 @@
pinctrl-0 = <&tps65917_pins_default>;
interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;

View File

@ -25,6 +25,7 @@
pmu {
compatible = "arm,cortex-a15-pmu";
interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&wakeupgen>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
};
};

View File

@ -41,8 +41,9 @@
pmu {
compatible = "arm,cortex-a15-pmu";
interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI DIRECT_IRQ(132) IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&wakeupgen>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
};
ocp {

View File

@ -173,14 +173,12 @@
twl: twl@48 {
reg = <0x48>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
interrupt-parent = <&gic>;
};
twl6040: twl@4b {
compatible = "ti,twl6040";
reg = <0x4b>;
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* gpio_160 */
vio-supply = <&v1v8>;

View File

@ -372,7 +372,6 @@
reg = <0x48>;
/* IRQ# = 7 */
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
interrupt-parent = <&gic>;
};
twl6040: twl@4b {
@ -384,7 +383,6 @@
/* IRQ# = 119 */
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */
vio-supply = <&v1v8>;
@ -479,17 +477,17 @@
};
&uart2 {
interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core OMAP4_UART2_RX>;
};
&uart3 {
interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core OMAP4_UART3_RX>;
};
&uart4 {
interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core OMAP4_UART4_RX>;
};

View File

@ -363,7 +363,6 @@
reg = <0x48>;
/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
interrupt-parent = <&gic>;
};
twl6040: twl@4b {
@ -375,7 +374,6 @@
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
vio-supply = <&v1v8>;
@ -570,21 +568,21 @@
};
&uart2 {
interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core OMAP4_UART2_RX>;
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
};
&uart3 {
interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core OMAP4_UART3_RX>;
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};
&uart4 {
interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core OMAP4_UART4_RX>;
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins>;

View File

@ -185,7 +185,6 @@
reg = <0x48>;
/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
interrupt-parent = <&gic>;
};
twl6040: twl@4b {
@ -197,7 +196,6 @@
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio6 22 0>; /* gpio 182 */
vio-supply = <&v1v8>;

View File

@ -14,7 +14,7 @@
/ {
compatible = "ti,omap4430", "ti,omap4";
interrupt-parent = <&gic>;
interrupt-parent = <&wakeupgen>;
aliases {
i2c0 = &i2c1;
@ -56,6 +56,7 @@
#interrupt-cells = <3>;
reg = <0x48241000 0x1000>,
<0x48240100 0x0100>;
interrupt-parent = <&gic>;
};
L2: l2-cache-controller@48242000 {
@ -70,6 +71,15 @@
clocks = <&mpu_periphclk>;
reg = <0x48240600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
interrupt-parent = <&gic>;
};
wakeupgen: interrupt-controller@48281000 {
compatible = "ti,omap4-wugen-mpu";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x48281000 0x1000>;
interrupt-parent = <&gic>;
};
/*
@ -319,7 +329,7 @@
uart2: serial@4806c000 {
compatible = "ti,omap4-uart";
reg = <0x4806c000 0x100>;
interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
@ -327,7 +337,7 @@
uart3: serial@48020000 {
compatible = "ti,omap4-uart";
reg = <0x48020000 0x100>;
interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
@ -335,7 +345,7 @@
uart4: serial@4806e000 {
compatible = "ti,omap4-uart";
reg = <0x4806e000 0x100>;
interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};

View File

@ -412,7 +412,6 @@
palmas: palmas@48 {
compatible = "ti,palmas";
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
interrupt-parent = <&gic>;
reg = <0x48>;
interrupt-controller;
#interrupt-cells = <2>;

View File

@ -311,7 +311,6 @@
palmas: palmas@48 {
compatible = "ti,palmas";
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
interrupt-parent = <&gic>;
reg = <0x48>;
interrupt-controller;
#interrupt-cells = <2>;
@ -521,7 +520,6 @@
pinctrl-0 = <&twl6040_pins>;
interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio5 13 0>; /* gpio line 141 */
vio-supply = <&smps7_reg>;

View File

@ -18,7 +18,7 @@
#size-cells = <1>;
compatible = "ti,omap5";
interrupt-parent = <&gic>;
interrupt-parent = <&wakeupgen>;
aliases {
i2c0 = &i2c1;
@ -79,6 +79,7 @@
<GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
interrupt-parent = <&gic>;
};
pmu {
@ -95,6 +96,15 @@
<0x48212000 0x1000>,
<0x48214000 0x2000>,
<0x48216000 0x2000>;
interrupt-parent = <&gic>;
};
wakeupgen: interrupt-controller@48281000 {
compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x48281000 0x1000>;
interrupt-parent = <&gic>;
};
/*
@ -458,7 +468,7 @@
uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
reg = <0x4806a000 0x100>;
interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
};
@ -466,7 +476,7 @@
uart2: serial@4806c000 {
compatible = "ti,omap4-uart";
reg = <0x4806c000 0x100>;
interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
@ -474,7 +484,7 @@
uart3: serial@48020000 {
compatible = "ti,omap4-uart";
reg = <0x48020000 0x100>;
interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
@ -482,7 +492,7 @@
uart4: serial@4806e000 {
compatible = "ti,omap4-uart";
reg = <0x4806e000 0x100>;
interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
@ -490,7 +500,7 @@
uart5: serial@48066000 {
compatible = "ti,omap4-uart";
reg = <0x48066000 0x100>;
interrupts-extended = <&gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart5";
clock-frequency = <48000000>;
};
@ -498,7 +508,7 @@
uart6: serial@48068000 {
compatible = "ti,omap4-uart";
reg = <0x48068000 0x100>;
interrupts-extended = <&gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart6";
clock-frequency = <48000000>;
};
@ -883,14 +893,12 @@
usbhsohci: ohci@4a064800 {
compatible = "ti,ohci-omap3";
reg = <0x4a064800 0x400>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
};
usbhsehci: ehci@4a064c00 {
compatible = "ti,ehci-omap";
reg = <0x4a064c00 0x400>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
};
};

View File

@ -20,11 +20,12 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/cpu.h>
#include <linux/notifier.h>
#include <linux/cpu_pm.h>
#include <linux/irqchip/arm-gic.h>
#include "omap-wakeupgen.h"
#include "omap-secure.h"
@ -78,29 +79,12 @@ static inline void sar_writel(u32 val, u32 offset, u8 idx)
static inline int _wakeupgen_get_irq_info(u32 irq, u32 *bit_posn, u8 *reg_index)
{
unsigned int spi_irq;
/*
* PPIs and SGIs are not supported.
*/
if (irq < OMAP44XX_IRQ_GIC_START)
return -EINVAL;
/*
* Subtract the GIC offset.
*/
spi_irq = irq - OMAP44XX_IRQ_GIC_START;
if (spi_irq > MAX_IRQS) {
pr_err("omap wakeupGen: Invalid IRQ%d\n", irq);
return -EINVAL;
}
/*
* Each WakeupGen register controls 32 interrupt.
* i.e. 1 bit per SPI IRQ
*/
*reg_index = spi_irq >> 5;
*bit_posn = spi_irq %= 32;
*reg_index = irq >> 5;
*bit_posn = irq %= 32;
return 0;
}
@ -141,6 +125,7 @@ static void wakeupgen_mask(struct irq_data *d)
raw_spin_lock_irqsave(&wakeupgen_lock, flags);
_wakeupgen_clear(d->hwirq, irq_target_cpu[d->hwirq]);
raw_spin_unlock_irqrestore(&wakeupgen_lock, flags);
irq_chip_mask_parent(d);
}
/*
@ -153,6 +138,7 @@ static void wakeupgen_unmask(struct irq_data *d)
raw_spin_lock_irqsave(&wakeupgen_lock, flags);
_wakeupgen_set(d->hwirq, irq_target_cpu[d->hwirq]);
raw_spin_unlock_irqrestore(&wakeupgen_lock, flags);
irq_chip_unmask_parent(d);
}
#ifdef CONFIG_HOTPLUG_CPU
@ -400,15 +386,91 @@ int omap_secure_apis_support(void)
return omap_secure_apis;
}
static struct irq_chip wakeupgen_chip = {
.name = "WUGEN",
.irq_eoi = irq_chip_eoi_parent,
.irq_mask = wakeupgen_mask,
.irq_unmask = wakeupgen_unmask,
.irq_retrigger = irq_chip_retrigger_hierarchy,
.flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND,
#ifdef CONFIG_SMP
.irq_set_affinity = irq_chip_set_affinity_parent,
#endif
};
static int wakeupgen_domain_xlate(struct irq_domain *domain,
struct device_node *controller,
const u32 *intspec,
unsigned int intsize,
unsigned long *out_hwirq,
unsigned int *out_type)
{
if (domain->of_node != controller)
return -EINVAL; /* Shouldn't happen, really... */
if (intsize != 3)
return -EINVAL; /* Not GIC compliant */
if (intspec[0] != 0)
return -EINVAL; /* No PPI should point to this domain */
*out_hwirq = intspec[1];
*out_type = intspec[2];
return 0;
}
static int wakeupgen_domain_alloc(struct irq_domain *domain,
unsigned int virq,
unsigned int nr_irqs, void *data)
{
struct of_phandle_args *args = data;
struct of_phandle_args parent_args;
irq_hw_number_t hwirq;
int i;
if (args->args_count != 3)
return -EINVAL; /* Not GIC compliant */
if (args->args[0] != 0)
return -EINVAL; /* No PPI should point to this domain */
hwirq = args->args[1];
if (hwirq >= MAX_IRQS)
return -EINVAL; /* Can't deal with this */
for (i = 0; i < nr_irqs; i++)
irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
&wakeupgen_chip, NULL);
parent_args = *args;
parent_args.np = domain->parent->of_node;
return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &parent_args);
}
static struct irq_domain_ops wakeupgen_domain_ops = {
.xlate = wakeupgen_domain_xlate,
.alloc = wakeupgen_domain_alloc,
.free = irq_domain_free_irqs_common,
};
/*
* Initialise the wakeupgen module.
*/
int __init omap_wakeupgen_init(void)
static int __init wakeupgen_init(struct device_node *node,
struct device_node *parent)
{
struct irq_domain *parent_domain, *domain;
int i;
unsigned int boot_cpu = smp_processor_id();
u32 val;
if (!parent) {
pr_err("%s: no parent, giving up\n", node->full_name);
return -ENODEV;
}
parent_domain = irq_find_host(parent);
if (!parent_domain) {
pr_err("%s: unable to obtain parent domain\n", node->full_name);
return -ENXIO;
}
/* Not supported on OMAP4 ES1.0 silicon */
if (omap_rev() == OMAP4430_REV_ES1_0) {
WARN(1, "WakeupGen: Not supported on OMAP4430 ES1.0\n");
@ -416,7 +478,7 @@ int __init omap_wakeupgen_init(void)
}
/* Static mapping, never released */
wakeupgen_base = ioremap(OMAP_WKUPGEN_BASE, SZ_4K);
wakeupgen_base = of_iomap(node, 0);
if (WARN_ON(!wakeupgen_base))
return -ENOMEM;
@ -429,6 +491,14 @@ int __init omap_wakeupgen_init(void)
max_irqs = AM43XX_IRQS;
}
domain = irq_domain_add_hierarchy(parent_domain, 0, max_irqs,
node, &wakeupgen_domain_ops,
NULL);
if (!domain) {
iounmap(wakeupgen_base);
return -ENOMEM;
}
/* Clear all IRQ bitmasks at wakeupGen level */
for (i = 0; i < irq_banks; i++) {
wakeupgen_writel(0, i, CPU0_ID);
@ -436,14 +506,6 @@ int __init omap_wakeupgen_init(void)
wakeupgen_writel(0, i, CPU1_ID);
}
/*
* Override GIC architecture specific functions to add
* OMAP WakeupGen interrupt controller along with GIC
*/
gic_arch_extn.irq_mask = wakeupgen_mask;
gic_arch_extn.irq_unmask = wakeupgen_unmask;
gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
/*
* FIXME: Add support to set_smp_affinity() once the core
* GIC code has necessary hooks in place.
@ -474,3 +536,9 @@ int __init omap_wakeupgen_init(void)
return 0;
}
/*
* We cannot use the IRQCHIP_DECLARE macro that lives in
* drivers/irqchip, so we're forced to roll our own. Not very nice.
*/
OF_DECLARE_2(irqchip, ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init);

View File

@ -33,7 +33,6 @@
#define OMAP_TIMESTAMPCYCLELO 0xc08
#define OMAP_TIMESTAMPCYCLEHI 0xc0c
extern int __init omap_wakeupgen_init(void);
extern void __iomem *omap_get_wakeupgen_base(void);
extern int omap_secure_apis_support(void);
#endif

View File

@ -22,7 +22,6 @@
#include <linux/of_platform.h>
#include <linux/export.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/irqchip/irq-crossbar.h>
#include <linux/of_address.h>
#include <linux/reboot.h>
#include <linux/genalloc.h>
@ -242,26 +241,26 @@ static int __init omap4_sar_ram_init(void)
}
omap_early_initcall(omap4_sar_ram_init);
static const struct of_device_id gic_match[] = {
{ .compatible = "arm,cortex-a9-gic", },
{ .compatible = "arm,cortex-a15-gic", },
static const struct of_device_id intc_match[] = {
{ .compatible = "ti,omap4-wugen-mpu", },
{ .compatible = "ti,omap5-wugen-mpu", },
{ },
};
static struct device_node *gic_node;
static struct device_node *intc_node;
unsigned int omap4_xlate_irq(unsigned int hwirq)
{
struct of_phandle_args irq_data;
unsigned int irq;
if (!gic_node)
gic_node = of_find_matching_node(NULL, gic_match);
if (!intc_node)
intc_node = of_find_matching_node(NULL, intc_match);
if (WARN_ON(!gic_node))
if (WARN_ON(!intc_node))
return hwirq;
irq_data.np = gic_node;
irq_data.np = intc_node;
irq_data.args_count = 3;
irq_data.args[0] = 0;
irq_data.args[1] = hwirq - OMAP44XX_IRQ_GIC_START;
@ -278,6 +277,12 @@ void __init omap_gic_of_init(void)
{
struct device_node *np;
intc_node = of_find_matching_node(NULL, intc_match);
if (WARN_ON(!intc_node)) {
pr_err("No WUGEN found in DT, system will misbehave.\n");
pr_err("UPDATE YOUR DEVICE TREE!\n");
}
/* Extract GIC distributor and TWD bases for OMAP4460 ROM Errata WA */
if (!cpu_is_omap446x())
goto skip_errata_init;
@ -291,9 +296,5 @@ void __init omap_gic_of_init(void)
WARN_ON(!twd_base);
skip_errata_init:
omap_wakeupgen_init();
#ifdef CONFIG_IRQ_CROSSBAR
irqcrossbar_init();
#endif
irqchip_init();
}

View File

@ -11,11 +11,12 @@
*/
#include <linux/err.h>
#include <linux/io.h>
#include <linux/irqdomain.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/slab.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/irqchip/irq-crossbar.h>
#include "irqchip.h"
#define IRQ_FREE -1
#define IRQ_RESERVED -2
@ -24,6 +25,7 @@
/**
* struct crossbar_device - crossbar device description
* @lock: spinlock serializing access to @irq_map
* @int_max: maximum number of supported interrupts
* @safe_map: safe default value to initialize the crossbar
* @max_crossbar_sources: Maximum number of crossbar sources
@ -33,6 +35,7 @@
* @write: register write function pointer
*/
struct crossbar_device {
raw_spinlock_t lock;
uint int_max;
uint safe_map;
uint max_crossbar_sources;
@ -44,72 +47,101 @@ struct crossbar_device {
static struct crossbar_device *cb;
static inline void crossbar_writel(int irq_no, int cb_no)
static void crossbar_writel(int irq_no, int cb_no)
{
writel(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]);
}
static inline void crossbar_writew(int irq_no, int cb_no)
static void crossbar_writew(int irq_no, int cb_no)
{
writew(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]);
}
static inline void crossbar_writeb(int irq_no, int cb_no)
static void crossbar_writeb(int irq_no, int cb_no)
{
writeb(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]);
}
static inline int get_prev_map_irq(int cb_no)
{
int i;
for (i = cb->int_max - 1; i >= 0; i--)
if (cb->irq_map[i] == cb_no)
return i;
return -ENODEV;
}
static inline int allocate_free_irq(int cb_no)
static struct irq_chip crossbar_chip = {
.name = "CBAR",
.irq_eoi = irq_chip_eoi_parent,
.irq_mask = irq_chip_mask_parent,
.irq_unmask = irq_chip_unmask_parent,
.irq_retrigger = irq_chip_retrigger_hierarchy,
.irq_set_wake = irq_chip_set_wake_parent,
#ifdef CONFIG_SMP
.irq_set_affinity = irq_chip_set_affinity_parent,
#endif
};
static int allocate_gic_irq(struct irq_domain *domain, unsigned virq,
irq_hw_number_t hwirq)
{
struct of_phandle_args args;
int i;
int err;
raw_spin_lock(&cb->lock);
for (i = cb->int_max - 1; i >= 0; i--) {
if (cb->irq_map[i] == IRQ_FREE) {
cb->irq_map[i] = cb_no;
return i;
cb->irq_map[i] = hwirq;
break;
}
}
raw_spin_unlock(&cb->lock);
return -ENODEV;
if (i < 0)
return -ENODEV;
args.np = domain->parent->of_node;
args.args_count = 3;
args.args[0] = 0; /* SPI */
args.args[1] = i;
args.args[2] = IRQ_TYPE_LEVEL_HIGH;
err = irq_domain_alloc_irqs_parent(domain, virq, 1, &args);
if (err)
cb->irq_map[i] = IRQ_FREE;
else
cb->write(i, hwirq);
return err;
}
static inline bool needs_crossbar_write(irq_hw_number_t hw)
static int crossbar_domain_alloc(struct irq_domain *d, unsigned int virq,
unsigned int nr_irqs, void *data)
{
int cb_no;
struct of_phandle_args *args = data;
irq_hw_number_t hwirq;
int i;
if (hw > GIC_IRQ_START) {
cb_no = cb->irq_map[hw - GIC_IRQ_START];
if (cb_no != IRQ_RESERVED && cb_no != IRQ_SKIP)
return true;
if (args->args_count != 3)
return -EINVAL; /* Not GIC compliant */
if (args->args[0] != 0)
return -EINVAL; /* No PPI should point to this domain */
hwirq = args->args[1];
if ((hwirq + nr_irqs) > cb->max_crossbar_sources)
return -EINVAL; /* Can't deal with this */
for (i = 0; i < nr_irqs; i++) {
int err = allocate_gic_irq(d, virq + i, hwirq + i);
if (err)
return err;
irq_domain_set_hwirq_and_chip(d, virq + i, hwirq + i,
&crossbar_chip, NULL);
}
return false;
}
static int crossbar_domain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hw)
{
if (needs_crossbar_write(hw))
cb->write(hw - GIC_IRQ_START, cb->irq_map[hw - GIC_IRQ_START]);
return 0;
}
/**
* crossbar_domain_unmap - unmap a crossbar<->irq connection
* @d: domain of irq to unmap
* @irq: virq number
* crossbar_domain_free - unmap/free a crossbar<->irq connection
* @domain: domain of irq to unmap
* @virq: virq number
* @nr_irqs: number of irqs to free
*
* We do not maintain a use count of total number of map/unmap
* calls for a particular irq to find out if a irq can be really
@ -117,14 +149,20 @@ static int crossbar_domain_map(struct irq_domain *d, unsigned int irq,
* after which irq is anyways unusable. So an explicit map has to be called
* after that.
*/
static void crossbar_domain_unmap(struct irq_domain *d, unsigned int irq)
static void crossbar_domain_free(struct irq_domain *domain, unsigned int virq,
unsigned int nr_irqs)
{
irq_hw_number_t hw = irq_get_irq_data(irq)->hwirq;
int i;
if (needs_crossbar_write(hw)) {
cb->irq_map[hw - GIC_IRQ_START] = IRQ_FREE;
cb->write(hw - GIC_IRQ_START, cb->safe_map);
raw_spin_lock(&cb->lock);
for (i = 0; i < nr_irqs; i++) {
struct irq_data *d = irq_domain_get_irq_data(domain, virq + i);
irq_domain_reset_irq_data(d);
cb->irq_map[d->hwirq] = IRQ_FREE;
cb->write(d->hwirq, cb->safe_map);
}
raw_spin_unlock(&cb->lock);
}
static int crossbar_domain_xlate(struct irq_domain *d,
@ -133,44 +171,22 @@ static int crossbar_domain_xlate(struct irq_domain *d,
unsigned long *out_hwirq,
unsigned int *out_type)
{
int ret;
int req_num = intspec[1];
int direct_map_num;
if (d->of_node != controller)
return -EINVAL; /* Shouldn't happen, really... */
if (intsize != 3)
return -EINVAL; /* Not GIC compliant */
if (intspec[0] != 0)
return -EINVAL; /* No PPI should point to this domain */
if (req_num >= cb->max_crossbar_sources) {
direct_map_num = req_num - cb->max_crossbar_sources;
if (direct_map_num < cb->int_max) {
ret = cb->irq_map[direct_map_num];
if (ret == IRQ_RESERVED || ret == IRQ_SKIP) {
/* We use the interrupt num as h/w irq num */
ret = direct_map_num;
goto found;
}
}
pr_err("%s: requested crossbar number %d > max %d\n",
__func__, req_num, cb->max_crossbar_sources);
return -EINVAL;
}
ret = get_prev_map_irq(req_num);
if (ret >= 0)
goto found;
ret = allocate_free_irq(req_num);
if (ret < 0)
return ret;
found:
*out_hwirq = ret + GIC_IRQ_START;
*out_hwirq = intspec[1];
*out_type = intspec[2];
return 0;
}
static const struct irq_domain_ops routable_irq_domain_ops = {
.map = crossbar_domain_map,
.unmap = crossbar_domain_unmap,
.xlate = crossbar_domain_xlate
static const struct irq_domain_ops crossbar_domain_ops = {
.alloc = crossbar_domain_alloc,
.free = crossbar_domain_free,
.xlate = crossbar_domain_xlate,
};
static int __init crossbar_of_init(struct device_node *node)
@ -293,7 +309,8 @@ static int __init crossbar_of_init(struct device_node *node)
cb->write(i, cb->safe_map);
}
register_routable_domain_ops(&routable_irq_domain_ops);
raw_spin_lock_init(&cb->lock);
return 0;
err_reg_offset:
@ -309,18 +326,37 @@ err_cb:
return ret;
}
static const struct of_device_id crossbar_match[] __initconst = {
{ .compatible = "ti,irq-crossbar" },
{}
};
int __init irqcrossbar_init(void)
static int __init irqcrossbar_init(struct device_node *node,
struct device_node *parent)
{
struct device_node *np;
np = of_find_matching_node(NULL, crossbar_match);
if (!np)
return -ENODEV;
struct irq_domain *parent_domain, *domain;
int err;
if (!parent) {
pr_err("%s: no parent, giving up\n", node->full_name);
return -ENODEV;
}
parent_domain = irq_find_host(parent);
if (!parent_domain) {
pr_err("%s: unable to obtain parent domain\n", node->full_name);
return -ENXIO;
}
err = crossbar_of_init(node);
if (err)
return err;
domain = irq_domain_add_hierarchy(parent_domain, 0,
cb->max_crossbar_sources,
node, &crossbar_domain_ops,
NULL);
if (!domain) {
pr_err("%s: failed to allocated domain\n", node->full_name);
return -ENOMEM;
}
crossbar_of_init(np);
return 0;
}
IRQCHIP_DECLARE(ti_irqcrossbar, "ti,irq-crossbar", irqcrossbar_init);

View File

@ -798,15 +798,12 @@ static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
irq_domain_set_info(d, irq, hw, &gic_chip, d->host_data,
handle_fasteoi_irq, NULL, NULL);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
gic_routable_irq_domain_ops->map(d, irq, hw);
}
return 0;
}
static void gic_irq_domain_unmap(struct irq_domain *d, unsigned int irq)
{
gic_routable_irq_domain_ops->unmap(d, irq);
}
static int gic_irq_domain_xlate(struct irq_domain *d,
@ -825,16 +822,8 @@ static int gic_irq_domain_xlate(struct irq_domain *d,
*out_hwirq = intspec[1] + 16;
/* For SPIs, we need to add 16 more to get the GIC irq ID number */
if (!intspec[0]) {
ret = gic_routable_irq_domain_ops->xlate(d, controller,
intspec,
intsize,
out_hwirq,
out_type);
if (IS_ERR_VALUE(ret))
return ret;
}
if (!intspec[0])
*out_hwirq += 16;
*out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
@ -891,37 +880,6 @@ static const struct irq_domain_ops gic_irq_domain_ops = {
.xlate = gic_irq_domain_xlate,
};
/* Default functions for routable irq domain */
static int gic_routable_irq_domain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hw)
{
return 0;
}
static void gic_routable_irq_domain_unmap(struct irq_domain *d,
unsigned int irq)
{
}
static int gic_routable_irq_domain_xlate(struct irq_domain *d,
struct device_node *controller,
const u32 *intspec, unsigned int intsize,
unsigned long *out_hwirq,
unsigned int *out_type)
{
*out_hwirq += 16;
return 0;
}
static const struct irq_domain_ops gic_default_routable_irq_domain_ops = {
.map = gic_routable_irq_domain_map,
.unmap = gic_routable_irq_domain_unmap,
.xlate = gic_routable_irq_domain_xlate,
};
const struct irq_domain_ops *gic_routable_irq_domain_ops =
&gic_default_routable_irq_domain_ops;
void __init gic_init_bases(unsigned int gic_nr, int irq_start,
void __iomem *dist_base, void __iomem *cpu_base,
u32 percpu_offset, struct device_node *node)
@ -929,7 +887,6 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
irq_hw_number_t hwirq_base;
struct gic_chip_data *gic;
int gic_irqs, irq_base, i;
int nr_routable_irqs;
BUG_ON(gic_nr >= MAX_GIC_NR);
@ -985,15 +942,9 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
gic->gic_irqs = gic_irqs;
if (node) { /* DT case */
const struct irq_domain_ops *ops = &gic_irq_domain_hierarchy_ops;
if (!of_property_read_u32(node, "arm,routable-irqs",
&nr_routable_irqs)) {
ops = &gic_irq_domain_ops;
gic_irqs = nr_routable_irqs;
}
gic->domain = irq_domain_add_linear(node, gic_irqs, ops, gic);
gic->domain = irq_domain_add_linear(node, gic_irqs,
&gic_irq_domain_hierarchy_ops,
gic);
} else { /* Non-DT case */
/*
* For primary GICs, skip over SGIs.

View File

@ -460,6 +460,7 @@ extern void irq_chip_eoi_parent(struct irq_data *data);
extern int irq_chip_set_affinity_parent(struct irq_data *data,
const struct cpumask *dest,
bool force);
extern int irq_chip_set_wake_parent(struct irq_data *data, unsigned int on);
#endif
/* Handling of unhandled and spurious interrupts: */

View File

@ -115,11 +115,5 @@ int gic_get_cpu_id(unsigned int cpu);
void gic_migrate_target(unsigned int new_cpu_id);
unsigned long gic_get_sgir_physaddr(void);
extern const struct irq_domain_ops *gic_routable_irq_domain_ops;
static inline void __init register_routable_domain_ops
(const struct irq_domain_ops *ops)
{
gic_routable_irq_domain_ops = ops;
}
#endif /* __ASSEMBLY */
#endif

View File

@ -1,11 +0,0 @@
/*
* drivers/irqchip/irq-crossbar.h
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
int irqcrossbar_init(void);

View File

@ -948,6 +948,22 @@ int irq_chip_retrigger_hierarchy(struct irq_data *data)
return -ENOSYS;
}
/**
* irq_chip_set_wake_parent - Set/reset wake-up on the parent interrupt
* @data: Pointer to interrupt specific data
* @on: Whether to set or reset the wake-up capability of this irq
*
* Conditional, as the underlying parent chip might not implement it.
*/
int irq_chip_set_wake_parent(struct irq_data *data, unsigned int on)
{
data = data->parent_data;
if (data->chip->irq_set_wake)
return data->chip->irq_set_wake(data, on);
return -ENOSYS;
}
#endif
/**