diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 53bd92f80314..15772f36b71f 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -125,6 +125,7 @@ stericsson ST-Ericsson synology Synology, Inc. ti Texas Instruments tlm Trusted Logic Mobility +toradex Toradex AG toshiba Toshiba Corporation toumaz Toumaz usi Universal Scientifc Industrial Co., Ltd. diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 05fc44bd71c2..e3597c58bbc2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -157,10 +157,12 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx27-phytec-phycard-s-rdk.dtb \ imx31-bug.dtb \ imx35-eukrea-mbimxsd35-baseboard.dtb \ + imx35-pdk.dtb \ imx50-evk.dtb \ imx51-apf51.dtb \ imx51-apf51dev.dtb \ imx51-babbage.dtb \ + imx51-digi-connectcore-jsk.dtb \ imx51-eukrea-mbimxsd51-baseboard.dtb \ imx53-ard.dtb \ imx53-m53evk.dtb \ @@ -179,6 +181,8 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6dl-gw54xx.dtb \ imx6dl-hummingboard.dtb \ imx6dl-nitrogen6x.dtb \ + imx6dl-phytec-pbab01.dtb \ + imx6dl-riotboard.dtb \ imx6dl-sabreauto.dtb \ imx6dl-sabrelite.dtb \ imx6dl-sabresd.dtb \ @@ -203,6 +207,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-udoo.dtb \ imx6q-wandboard.dtb \ imx6sl-evk.dtb \ + vf610-colibri.dtb \ vf610-cosmic.dtb \ vf610-twr.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts index 62fb3da50bdb..ad12da38fc92 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts @@ -172,3 +172,16 @@ fsl,uart-has-rtscts; status = "okay"; }; + +&usbhost1 { + phy_type = "serial"; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + phy_type = "utmi"; + dr_mode = "otg"; + external-vbus-divider; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts index f8db366c46ff..9b31faa96377 100644 --- a/arch/arm/boot/dts/imx25-karo-tx25.dts +++ b/arch/arm/boot/dts/imx25-karo-tx25.dts @@ -16,21 +16,98 @@ model = "Ka-Ro TX25"; compatible = "karo,imx25-tx25", "fsl,imx25"; + chosen { + stdout-path = &uart1; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_fec_phy: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "fec-phy"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 9 0>; + enable-active-high; + }; + }; + memory { reg = <0x80000000 0x02000000 0x90000000 0x02000000>; }; }; +&iomuxc { + pinctrl_uart1: uart1grp { + fsl,pins = < + MX25_PAD_UART1_TXD__UART1_TXD 0x80000000 + MX25_PAD_UART1_RXD__UART1_RXD 0x80000000 + MX25_PAD_UART1_CTS__UART1_CTS 0x80000000 + MX25_PAD_UART1_RTS__UART1_RTS 0x80000000 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX25_PAD_D11__GPIO_4_9 0x80000000 /* FEC PHY power on pin */ + MX25_PAD_D13__GPIO_4_7 0x80000000 /* FEC reset */ + MX25_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX25_PAD_FEC_MDIO__FEC_MDIO 0x80000000 + MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000 + MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000 + MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000 + MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000 + MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 + MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x80000000 + >; + }; + + pinctrl_nfc: nfcgrp { + fsl,pins = < + MX25_PAD_NF_CE0__NF_CE0 0x80000000 + MX25_PAD_NFWE_B__NFWE_B 0x80000000 + MX25_PAD_NFRE_B__NFRE_B 0x80000000 + MX25_PAD_NFALE__NFALE 0x80000000 + MX25_PAD_NFCLE__NFCLE 0x80000000 + MX25_PAD_NFWP_B__NFWP_B 0x80000000 + MX25_PAD_NFRB__NFRB 0x80000000 + MX25_PAD_D7__D7 0x80000000 + MX25_PAD_D6__D6 0x80000000 + MX25_PAD_D5__D5 0x80000000 + MX25_PAD_D4__D4 0x80000000 + MX25_PAD_D3__D3 0x80000000 + MX25_PAD_D2__D2 0x80000000 + MX25_PAD_D1__D1 0x80000000 + MX25_PAD_D0__D0 0x80000000 + >; + }; +}; + &uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-reset-gpios = <&gpio3 7 0>; phy-mode = "rmii"; + phy-supply = <®_fec_phy>; status = "okay"; }; &nfc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; nand-on-flash-bbt; + nand-ecc-mode = "hw"; + nand-bus-width = <8>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index f607ce520eda..c608942b8a3b 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -10,6 +10,7 @@ */ /dts-v1/; +#include #include "imx25.dtsi" / { @@ -19,18 +20,232 @@ memory { reg = <0x80000000 0x4000000>; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_fec_3v3: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "fec-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 3 0>; + enable-active-high; + }; + + reg_2p5v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + reg_3p3v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_can_3v3: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "can-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 6 0>; + }; + }; + + sound { + compatible = "fsl,imx25-pdk-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx25-pdk-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <4>; + }; }; -&uart1 { +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_can_3v3>; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + cd-gpios = <&gpio2 1 0>; + wp-gpios = <&gpio2 0 0>; status = "okay"; }; &fec { phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-supply = <®_fec_3v3>; + phy-reset-gpios = <&gpio4 8 0>; status = "okay"; }; +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 129>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&iomuxc { + imx25-pdk { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX25_PAD_RW__AUD4_TXFS 0xe0 + MX25_PAD_OE__AUD4_TXC 0xe0 + MX25_PAD_EB0__AUD4_TXD 0xe0 + MX25_PAD_EB1__AUD4_RXD 0xe0 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX25_PAD_GPIO_A__CAN1_TX 0x0 + MX25_PAD_GPIO_B__CAN1_RX 0x0 + MX25_PAD_D14__GPIO_4_6 0x80000000 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX25_PAD_SD1_CMD__SD1_CMD 0x80000000 + MX25_PAD_SD1_CLK__SD1_CLK 0x80000000 + MX25_PAD_SD1_DATA0__SD1_DATA0 0x80000000 + MX25_PAD_SD1_DATA1__SD1_DATA1 0x80000000 + MX25_PAD_SD1_DATA2__SD1_DATA2 0x80000000 + MX25_PAD_SD1_DATA3__SD1_DATA3 0x80000000 + MX25_PAD_A14__GPIO_2_0 0x80000000 + MX25_PAD_A15__GPIO_2_1 0x80000000 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX25_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0 + MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000 + MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000 + MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000 + MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000 + MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 + MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0 + MX25_PAD_A17__GPIO_2_3 0x80000000 + MX25_PAD_D12__GPIO_4_8 0x80000000 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000 + MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000 + >; + }; + + pinctrl_kpp: kppgrp { + fsl,pins = < + MX25_PAD_KPP_ROW0__KPP_ROW0 0x80000000 + MX25_PAD_KPP_ROW1__KPP_ROW1 0x80000000 + MX25_PAD_KPP_ROW2__KPP_ROW2 0x80000000 + MX25_PAD_KPP_ROW3__KPP_ROW3 0x80000000 + MX25_PAD_KPP_COL0__KPP_COL0 0x80000000 + MX25_PAD_KPP_COL1__KPP_COL1 0x80000000 + MX25_PAD_KPP_COL2__KPP_COL2 0x80000000 + MX25_PAD_KPP_COL3__KPP_COL3 0x80000000 + >; + }; + + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX25_PAD_UART1_RTS__UART1_RTS 0xe0 + MX25_PAD_UART1_CTS__UART1_CTS 0xe0 + MX25_PAD_UART1_TXD__UART1_TXD 0x80000000 + MX25_PAD_UART1_RXD__UART1_RXD 0xc0 + >; + }; + }; +}; + &nfc { nand-on-flash-bbt; status = "okay"; }; + +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp>; + linux,keymap = < + MATRIX_KEY(0x0, 0x0, KEY_UP) + MATRIX_KEY(0x0, 0x1, KEY_DOWN) + MATRIX_KEY(0x0, 0x2, KEY_VOLUMEDOWN) + MATRIX_KEY(0x0, 0x3, KEY_HOME) + MATRIX_KEY(0x1, 0x0, KEY_RIGHT) + MATRIX_KEY(0x1, 0x1, KEY_LEFT) + MATRIX_KEY(0x1, 0x2, KEY_ENTER) + MATRIX_KEY(0x1, 0x3, KEY_VOLUMEUP) + MATRIX_KEY(0x2, 0x0, KEY_F6) + MATRIX_KEY(0x2, 0x1, KEY_F8) + MATRIX_KEY(0x2, 0x2, KEY_F9) + MATRIX_KEY(0x2, 0x3, KEY_F10) + MATRIX_KEY(0x3, 0x0, KEY_F1) + MATRIX_KEY(0x3, 0x1, KEY_F2) + MATRIX_KEY(0x3, 0x2, KEY_F3) + MATRIX_KEY(0x3, 0x2, KEY_POWER) + >; + status = "okay"; +}; + +&ssi1 { + codec-handle = <&codec>; + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbhost1 { + phy_type = "serial"; + dr_mode = "host"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index ea323f09dc78..bb74d9582b7e 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -14,6 +14,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -21,6 +22,8 @@ i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; + mmc0 = &esdhc1; + mmc1 = &esdhc2; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; @@ -165,9 +168,10 @@ status = "disabled"; }; - kpp@43fa8000 { + kpp: kpp@43fa8000 { #address-cells = <1>; #size-cells = <0>; + compatible = "fsl,imx25-kpp", "fsl,imx21-kpp"; reg = <0x43fa8000 0x4000>; clocks = <&clks 102>; clock-names = ""; @@ -482,23 +486,13 @@ clocks = <&clks 99>; }; - usbphy1: usbphy@1 { - compatible = "nop-usbphy"; - status = "disabled"; - }; - - usbphy2: usbphy@2 { - compatible = "nop-usbphy"; - status = "disabled"; - }; - usbotg: usb@53ff4000 { compatible = "fsl,imx25-usb", "fsl,imx27-usb"; reg = <0x53ff4000 0x0200>; interrupts = <37>; - clocks = <&clks 9>, <&clks 70>, <&clks 8>; - clock-names = "ipg", "ahb", "per"; + clocks = <&clks 70>; fsl,usbmisc = <&usbmisc 0>; + fsl,usbphy = <&usbphy0>; status = "disabled"; }; @@ -506,9 +500,9 @@ compatible = "fsl,imx25-usb", "fsl,imx27-usb"; reg = <0x53ff4400 0x0200>; interrupts = <35>; - clocks = <&clks 9>, <&clks 70>, <&clks 8>; - clock-names = "ipg", "ahb", "per"; + clocks = <&clks 70>; fsl,usbmisc = <&usbmisc 1>; + fsl,usbphy = <&usbphy1>; status = "disabled"; }; @@ -518,7 +512,6 @@ clocks = <&clks 9>, <&clks 70>, <&clks 8>; clock-names = "ipg", "ahb", "per"; reg = <0x53ff4600 0x00f>; - status = "disabled"; }; dryice@53ffc000 { @@ -530,6 +523,11 @@ }; }; + iram: sram@78000000 { + compatible = "mmio-sram"; + reg = <0x78000000 0x20000>; + }; + emi@80000000 { compatible = "fsl,emi-bus", "simple-bus"; #address-cells = <1>; @@ -550,4 +548,20 @@ }; }; }; + + usbphy { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usbphy0: usb-phy@0 { + reg = <0>; + compatible = "usb-nop-xceiv"; + }; + + usbphy1: usb-phy@1 { + reg = <1>; + compatible = "usb-nop-xceiv"; + }; + }; }; diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts index 5ce89aa275df..4c317716b510 100644 --- a/arch/arm/boot/dts/imx27-pdk.dts +++ b/arch/arm/boot/dts/imx27-pdk.dts @@ -17,15 +17,181 @@ compatible = "fsl,imx27-pdk", "fsl,imx27"; memory { - reg = <0x0 0x0>; + reg = <0xa0000000 0x08000000>; }; + + usbphy { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usbphy0: usbphy@0 { + compatible = "usb-nop-xceiv"; + reg = <0>; + clocks = <&clks 0>; + clock-names = "main_clk"; + }; + }; +}; + +&cspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cspi2>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>; + status = "okay"; + + pmic: mc13783@0 { + compatible = "fsl,mc13783"; + reg = <0>; + spi-cs-high; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio3>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + + regulators { + vgen_reg: vgen { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + vmmc1_reg: vmmc1 { + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3000000>; + }; + + gpo1_reg: gpo1 { + regulator-always-on; + regulator-boot-on; + }; + + gpo3_reg: gpo3 { + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&fec { + phy-mode = "mii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + status = "okay"; +}; + +&kpp { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_UP) + MATRIX_KEY(0, 1, KEY_DOWN) + MATRIX_KEY(1, 0, KEY_RIGHT) + MATRIX_KEY(1, 1, KEY_LEFT) + MATRIX_KEY(1, 2, KEY_ENTER) + MATRIX_KEY(2, 0, KEY_F6) + MATRIX_KEY(2, 1, KEY_F8) + MATRIX_KEY(2, 2, KEY_F9) + MATRIX_KEY(2, 3, KEY_F10) + >; + status = "okay"; +}; + +&nfc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; }; &uart1 { fsl,uart-has-rtscts; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; -&fec { +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + dr_mode = "otg"; + fsl,usbphy = <&usbphy0>; + phy_type = "ulpi"; status = "okay"; }; + +&iomuxc { + imx27-pdk { + pinctrl_cspi2: cspi2grp { + fsl,pins = < + MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0 + MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0 + MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0 + MX27_PAD_CSPI2_SS0__GPIO4_21 0x0 /* SPI2 CS0 */ + MX27_PAD_TOUT__GPIO3_14 0x0 /* PMIC IRQ */ + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX27_PAD_SD3_CMD__FEC_TXD0 0x0 + MX27_PAD_SD3_CLK__FEC_TXD1 0x0 + MX27_PAD_ATA_DATA0__FEC_TXD2 0x0 + MX27_PAD_ATA_DATA1__FEC_TXD3 0x0 + MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0 + MX27_PAD_ATA_DATA3__FEC_RXD1 0x0 + MX27_PAD_ATA_DATA4__FEC_RXD2 0x0 + MX27_PAD_ATA_DATA5__FEC_RXD3 0x0 + MX27_PAD_ATA_DATA6__FEC_MDIO 0x0 + MX27_PAD_ATA_DATA7__FEC_MDC 0x0 + MX27_PAD_ATA_DATA8__FEC_CRS 0x0 + MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0 + MX27_PAD_ATA_DATA10__FEC_RXD0 0x0 + MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0 + MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0 + MX27_PAD_ATA_DATA13__FEC_COL 0x0 + MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0 + MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0 + >; + }; + + pinctrl_nand: nandgrp { + fsl,pins = < + MX27_PAD_NFRB__NFRB 0x0 + MX27_PAD_NFCLE__NFCLE 0x0 + MX27_PAD_NFWP_B__NFWP_B 0x0 + MX27_PAD_NFCE_B__NFCE_B 0x0 + MX27_PAD_NFALE__NFALE 0x0 + MX27_PAD_NFRE_B__NFRE_B 0x0 + MX27_PAD_NFWE_B__NFWE_B 0x0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX27_PAD_UART1_TXD__UART1_TXD 0x0 + MX27_PAD_UART1_RXD__UART1_RXD 0x0 + MX27_PAD_UART1_CTS__UART1_CTS 0x0 + MX27_PAD_UART1_RTS__UART1_RTS 0x0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0 + MX27_PAD_USBOTG_STP__USBOTG_STP 0x0 + MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0 + MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0 + MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0 + MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0 + MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0 + MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0 + MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0 + MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0 + MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0 + MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts index 3c3964a99637..7c869fe3c30b 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts @@ -15,6 +15,10 @@ model = "Phytec pca100 rapid development kit"; compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27"; + chosen { + stdout-path = &uart1; + }; + display: display { model = "Primeview-PD050VL1"; native-mode = <&timing0>; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index df3b2e731835..fe02bc7a24fd 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -12,14 +12,79 @@ / { model = "Phytec pcm970"; compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27"; + + chosen { + stdout-path = &uart1; + }; + + display0: LQ035Q7 { + model = "Sharp-LQ035Q7"; + native-mode = <&timing0>; + bits-per-pixel = <16>; + fsl,pcr = <0xf00080c0>; + + display-timings { + timing0: 240x320 { + clock-frequency = <5500000>; + hactive = <240>; + vactive = <320>; + hback-porch = <5>; + hsync-len = <7>; + hfront-porch = <16>; + vback-porch = <7>; + vsync-len = <1>; + vfront-porch = <9>; + pixelclk-active = <1>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <0>; + }; + }; + }; + + regulators { + regulator@2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_csien>; + reg = <2>; + regulator-name = "CSI_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 24 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; + }; + + usbphy { + usbphy2: usbphy@2 { + compatible = "usb-nop-xceiv"; + reg = <2>; + vcc-supply = <®_5v0>; + clocks = <&clks 0>; + clock-names = "main_clk"; + }; + }; }; &cspi1 { + pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>; fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>, <&gpio4 27 GPIO_ACTIVE_LOW>; }; +&fb { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_imxfb1>; + display = <&display0>; + lcd-supply = <®_5v0>; + fsl,dmacr = <0x00020010>; + fsl,lscr1 = <0x00120300>; + fsl,lpccr = <0x00a903ff>; + status = "okay"; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -36,6 +101,50 @@ &iomuxc { imx27_phycore_rdk { + pinctrl_csien: csiengrp { + fsl,pins = < + MX27_PAD_USB_OC_B__GPIO2_24 0x0 + >; + }; + + pinctrl_cspi1cs1: cspi1cs1grp { + fsl,pins = < + MX27_PAD_CSPI1_SS1__GPIO4_27 0x0 + >; + }; + + pinctrl_imxfb1: imxfbgrp { + fsl,pins = < + MX27_PAD_LD0__LD0 0x0 + MX27_PAD_LD1__LD1 0x0 + MX27_PAD_LD2__LD2 0x0 + MX27_PAD_LD3__LD3 0x0 + MX27_PAD_LD4__LD4 0x0 + MX27_PAD_LD5__LD5 0x0 + MX27_PAD_LD6__LD6 0x0 + MX27_PAD_LD7__LD7 0x0 + MX27_PAD_LD8__LD8 0x0 + MX27_PAD_LD9__LD9 0x0 + MX27_PAD_LD10__LD10 0x0 + MX27_PAD_LD11__LD11 0x0 + MX27_PAD_LD12__LD12 0x0 + MX27_PAD_LD13__LD13 0x0 + MX27_PAD_LD14__LD14 0x0 + MX27_PAD_LD15__LD15 0x0 + MX27_PAD_LD16__LD16 0x0 + MX27_PAD_LD17__LD17 0x0 + MX27_PAD_CLS__CLS 0x0 + MX27_PAD_CONTRAST__CONTRAST 0x0 + MX27_PAD_LSCLK__LSCLK 0x0 + MX27_PAD_OE_ACD__OE_ACD 0x0 + MX27_PAD_PS__PS 0x0 + MX27_PAD_REV__REV 0x0 + MX27_PAD_SPL_SPR__SPL_SPR 0x0 + MX27_PAD_HSYNC__HSYNC 0x0 + MX27_PAD_VSYNC__VSYNC 0x0 + >; + }; + pinctrl_i2c1: i2c1grp { /* Add pullup to DATA line */ fsl,pins = < @@ -193,19 +302,16 @@ dr_mode = "host"; phy_type = "ulpi"; vbus-supply = <®_5v0>; + fsl,usbphy = <&usbphy2>; disable-over-current; status = "okay"; }; -&usbphy2 { - vcc-supply = <®_5v0>; -}; - &weim { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_weim>; - can@d4000000 { + can@4,0 { compatible = "nxp,sja1000"; reg = <4 0x00000000 0x00000100>; interrupt-parent = <&gpio5>; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi index cefaa6994623..31e9f7049f73 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi @@ -41,6 +41,20 @@ regulator-max-microvolt = <5000000>; }; }; + + usbphy { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usbphy0: usbphy@0 { + compatible = "usb-nop-xceiv"; + reg = <0>; + vcc-supply = <&sw3_reg>; + clocks = <&clks 0>; + clock-names = "main_clk"; + }; + }; }; &audmux { @@ -66,9 +80,9 @@ status = "okay"; pmic: mc13783@0 { - #address-cells = <1>; - #size-cells = <0>; compatible = "fsl,mc13783"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; reg = <0>; spi-cs-high; spi-max-frequency = <20000000>; @@ -166,7 +180,7 @@ &fec { phy-mode = "mii"; - phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_LOW>; phy-supply = <®_3v3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; @@ -204,7 +218,6 @@ MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0 MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0 MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* SPI1 CS0 */ - MX27_PAD_USB_PWR__GPIO2_23 0x0 /* PMIC IRQ */ >; }; @@ -251,6 +264,21 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX27_PAD_USB_PWR__GPIO2_23 0x0 /* PMIC IRQ */ + >; + }; + + pinctrl_ssi1: ssi1grp { + fsl,pins = < + MX27_PAD_SSI1_FS__SSI1_FS 0x0 + MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x0 + MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x0 + MX27_PAD_SSI1_CLK__SSI1_CLK 0x0 + >; + }; + pinctrl_usbotg: usbotggrp { fsl,pins = < MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0 @@ -279,23 +307,28 @@ status = "okay"; }; +&ssi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssi1>; + fsl,mode = "i2s-slave"; + status = "okay"; +}; + &usbotg { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; dr_mode = "otg"; phy_type = "ulpi"; + fsl,usbphy = <&usbphy0>; vbus-supply = <&sw3_reg>; + disable-over-current; status = "okay"; }; -&usbphy0 { - vcc-supply = <&sw3_reg>; -}; - &weim { status = "okay"; - nor: nor@c0000000 { + nor: nor@0,0 { compatible = "cfi-flash"; reg = <0 0x00000000 0x02000000>; bank-width = <2>; @@ -305,7 +338,7 @@ #size-cells = <1>; }; - sram: sram@c8000000 { + sram: sram@1,0 { compatible = "mtd-ram"; reg = <1 0x00000000 0x00800000>; bank-width = <2>; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 137e010eab35..a75555c39533 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -11,11 +11,13 @@ #include "skeleton.dtsi" #include "imx27-pinfunc.h" +#include #include #include / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -71,26 +73,6 @@ }; }; - usbphy { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usbphy0: usbphy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - clocks = <&clks 75>; - clock-names = "main_clk"; - }; - - usbphy2: usbphy@2 { - compatible = "usb-nop-xceiv"; - reg = <2>; - clocks = <&clks 75>; - clock-names = "main_clk"; - }; - }; - soc { #address-cells = <1>; #size-cells = <1>; @@ -464,9 +446,8 @@ compatible = "fsl,imx27-usb"; reg = <0x10024000 0x200>; interrupts = <56>; - clocks = <&clks 15>; + clocks = <&clks 75>; fsl,usbmisc = <&usbmisc 0>; - fsl,usbphy = <&usbphy0>; status = "disabled"; }; @@ -474,7 +455,7 @@ compatible = "fsl,imx27-usb"; reg = <0x10024200 0x200>; interrupts = <54>; - clocks = <&clks 15>; + clocks = <&clks 75>; fsl,usbmisc = <&usbmisc 1>; status = "disabled"; }; @@ -483,9 +464,8 @@ compatible = "fsl,imx27-usb"; reg = <0x10024400 0x200>; interrupts = <55>; - clocks = <&clks 15>; + clocks = <&clks 75>; fsl,usbmisc = <&usbmisc 2>; - fsl,usbphy = <&usbphy2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts index 5f326c1c1850..ce1a7effba37 100644 --- a/arch/arm/boot/dts/imx28-duckbill.dts +++ b/arch/arm/boot/dts/imx28-duckbill.dts @@ -25,9 +25,9 @@ ssp0: ssp@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; + bus-width = <4>; vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -39,7 +39,7 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - MX28_PAD_ENET0_RX_CLK__GPIO_4_13 /* PHY Reset */ + MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */ >; fsl,drive-strength = ; fsl,voltage = ; @@ -82,7 +82,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio4 13 0>; + phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; status = "okay"; }; @@ -110,12 +110,12 @@ status { label = "duckbill:green:status"; - gpios = <&gpio3 5 0>; + gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>; }; failure { label = "duckbill:red:status"; - gpios = <&gpio3 4 0>; + gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 90a579532b8b..a95cc5358ff4 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -9,6 +9,7 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include #include "skeleton.dtsi" #include "imx28-pinfunc.h" diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi index 906ae937b013..9c2b715ab8bf 100644 --- a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi +++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi @@ -37,6 +37,17 @@ compatible = "nxp,pcf8563"; reg = <0x51>; }; + + tsc2007: tsc2007@48 { + compatible = "ti,tsc2007"; + gpios = <&gpio3 2 0>; + interrupt-parent = <&gpio3>; + interrupts = <0x2 0x8>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc2007_1>; + reg = <0x48>; + ti,x-plate-ohms = <180>; + }; }; &iomuxc { @@ -70,6 +81,10 @@ MX35_PAD_I2C1_DAT__I2C1_SDA 0x80000000 >; }; + + pinctrl_tsc2007_1: tsc2007grp-1 { + fsl,pins = ; + }; }; }; diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts index 1bdec21f4533..f04ae91eea89 100644 --- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts +++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts @@ -46,6 +46,14 @@ linux,default-trigger = "heartbeat"; }; }; + + sound { + compatible = "eukrea,asoc-tlv320"; + eukrea,model = "imx35-eukrea-tlv320aic23"; + ssi-controller = <&ssi1>; + fsl,mux-int-port = <1>; + fsl,mux-ext-port = <4>; + }; }; &audmux { @@ -124,6 +132,7 @@ }; &ssi1 { + codec-handle = <&tlv320aic23>; fsl,mode = "i2s-slave"; status = "okay"; }; @@ -141,3 +150,16 @@ fsl,uart-has-rtscts; status = "okay"; }; + +&usbhost1 { + phy_type = "serial"; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + phy_type = "utmi"; + dr_mode = "otg"; + external-vbus-divider; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx35-pdk.dts b/arch/arm/boot/dts/imx35-pdk.dts new file mode 100644 index 000000000000..8d715523708f --- /dev/null +++ b/arch/arm/boot/dts/imx35-pdk.dts @@ -0,0 +1,68 @@ +/* + * Copyright 2013 EukrĂ©a Electromatique + * Copyright 2014 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx35.dtsi" + +/ { + model = "Freescale i.MX35 Product Development Kit"; + compatible = "fsl,imx35-pdk", "fsl,imx35"; + + memory { + reg = <0x80000000 0x8000000>, + <0x90000000 0x8000000>; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + status = "okay"; +}; + +&iomuxc { + imx35-pdk { + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX35_PAD_SD1_CMD__ESDHC1_CMD 0x80000000 + MX35_PAD_SD1_CLK__ESDHC1_CLK 0x80000000 + MX35_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000 + MX35_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000 + MX35_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000 + MX35_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX35_PAD_TXD1__UART1_TXD_MUX 0x1c5 + MX35_PAD_RXD1__UART1_RXD_MUX 0x1c5 + MX35_PAD_CTS1__UART1_CTS 0x1c5 + MX35_PAD_RTS1__UART1_RTS 0x1c5 + >; + }; + }; +}; + +&nfc { + nand-bus-width = <16>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 88b218f8f810..4759abb49436 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -13,6 +13,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -295,9 +296,9 @@ compatible = "fsl,imx35-usb", "fsl,imx27-usb"; reg = <0x53ff4000 0x0200>; interrupts = <37>; - clocks = <&clks 9>, <&clks 73>, <&clks 28>; - clock-names = "ipg", "ahb", "per"; + clocks = <&clks 73>; fsl,usbmisc = <&usbmisc 0>; + fsl,usbphy = <&usbphy0>; status = "disabled"; }; @@ -305,9 +306,9 @@ compatible = "fsl,imx35-usb", "fsl,imx27-usb"; reg = <0x53ff4400 0x0200>; interrupts = <35>; - clocks = <&clks 9>, <&clks 73>, <&clks 28>; - clock-names = "ipg", "ahb", "per"; + clocks = <&clks 73>; fsl,usbmisc = <&usbmisc 1>; + fsl,usbphy = <&usbphy1>; status = "disabled"; }; @@ -356,4 +357,20 @@ }; }; }; + + usbphy { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usbphy0: usb-phy@0 { + reg = <0>; + compatible = "usb-nop-xceiv"; + }; + + usbphy1: usb-phy@1 { + reg = <1>; + compatible = "usb-nop-xceiv"; + }; + }; }; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 9c89d1ca97c2..6a201cf54366 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -17,6 +17,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 9e9deb244b76..6bc3243a80d3 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -17,10 +17,28 @@ model = "Freescale i.MX51 Babbage Board"; compatible = "fsl,imx51-babbage", "fsl,imx51"; + chosen { + stdout-path = &uart1; + }; + memory { reg = <0x90000000 0x20000000>; }; + clocks { + ckih1 { + clock-frequency = <22579200>; + }; + + clk_26M: codec_clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <26000000>; + gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + }; + }; + display0: display@di0 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "rgb24"; @@ -82,11 +100,13 @@ gpio-keys { compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; power { label = "Power Button"; gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; - linux,code = <116>; /* KEY_POWER */ + linux,code = ; gpio-key,wakeup; }; }; @@ -102,6 +122,36 @@ }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usbh1_vbus: regulator@0 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1reg>; + reg = <0>; + regulator-name = "usbh1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbotg_vbus: regulator@1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotgreg>; + reg = <1>; + regulator-name = "usbotg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; + sound { compatible = "fsl,imx51-babbage-sgtl5000", "fsl,imx-audio-sgtl5000"; @@ -116,41 +166,23 @@ mux-ext-port = <3>; }; - clocks { - ckih1 { - clock-frequency = <22579200>; - }; + usbphy { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-bus"; - clk_26M: codec_clock { - compatible = "fixed-clock"; - reg=<0>; - #clock-cells = <0>; - clock-frequency = <26000000>; - gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + usbh1phy: usbh1phy@0 { + compatible = "usb-nop-xceiv"; + reg = <0>; + clocks = <&clks IMX5_CLK_DUMMY>; + clock-names = "main_clk"; }; }; }; -&esdhc1 { +&audmux { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1>; - fsl,cd-controller; - fsl,wp-controller; - status = "okay"; -}; - -&esdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc2>; - cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + pinctrl-0 = <&pinctrl_audmux>; status = "okay"; }; @@ -163,9 +195,9 @@ status = "okay"; pmic: mc13892@0 { - #address-cells = <1>; - #size-cells = <0>; compatible = "fsl,mc13892"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; spi-max-frequency = <6000000>; spi-cs-high; reg = <0>; @@ -280,6 +312,53 @@ }; }; +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + fsl,cd-controller; + fsl,wp-controller; + status = "okay"; +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2>; + cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "mii"; + phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_clkcodec>; + reg = <0x0a>; + clocks = <&clk_26M>; + VDDA-supply = <&vdig_reg>; + VDDIO-supply = <&vvideo_reg>; + }; +}; + &ipu_di0_disp0 { remote-endpoint = <&display0_in>; }; @@ -288,29 +367,74 @@ remote-endpoint = <&display1_in>; }; +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp>; + linux,keymap = < + MATRIX_KEY(0, 0, KEY_UP) + MATRIX_KEY(0, 1, KEY_DOWN) + MATRIX_KEY(0, 2, KEY_VOLUMEDOWN) + MATRIX_KEY(0, 3, KEY_HOME) + MATRIX_KEY(1, 0, KEY_RIGHT) + MATRIX_KEY(1, 1, KEY_LEFT) + MATRIX_KEY(1, 2, KEY_ENTER) + MATRIX_KEY(1, 3, KEY_VOLUMEUP) + MATRIX_KEY(2, 0, KEY_F6) + MATRIX_KEY(2, 1, KEY_F8) + MATRIX_KEY(2, 2, KEY_F9) + MATRIX_KEY(2, 3, KEY_F10) + MATRIX_KEY(3, 0, KEY_F1) + MATRIX_KEY(3, 1, KEY_F2) + MATRIX_KEY(3, 2, KEY_F3) + MATRIX_KEY(3, 3, KEY_POWER) + >; + status = "okay"; +}; + &ssi2 { fsl,mode = "i2s-slave"; status = "okay"; }; -&iomuxc { +&uart1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <®_usbh1_vbus>; + fsl,usbphy = <&usbh1phy>; + phy_type = "ulpi"; + status = "okay"; +}; + +&usbotg { + dr_mode = "otg"; + disable-over-current; + phy_type = "utmi_wide"; + vbus-supply = <®_usbotg_vbus>; + status = "okay"; +}; + +&iomuxc { imx51-babbage { - pinctrl_hog: hoggrp { - fsl,pins = < - MX51_PAD_GPIO1_0__SD1_CD 0x20d5 - MX51_PAD_GPIO1_1__SD1_WP 0x20d5 - MX51_PAD_GPIO1_5__GPIO1_5 0x100 - MX51_PAD_GPIO1_6__GPIO1_6 0x100 - MX51_PAD_EIM_A27__GPIO2_21 0x5 - MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 - MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 - MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000 - >; - }; - pinctrl_audmux: audmuxgrp { fsl,pins = < MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000 @@ -320,11 +444,19 @@ >; }; + pinctrl_clkcodec: clkcodecgrp { + fsl,pins = < + MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000 + >; + }; + pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */ + MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 /* CS1 */ >; }; @@ -336,6 +468,8 @@ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + MX51_PAD_GPIO1_0__SD1_CD 0x20d5 + MX51_PAD_GPIO1_1__SD1_WP 0x20d5 >; }; @@ -347,29 +481,38 @@ MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5 MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5 MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5 + MX51_PAD_GPIO1_5__GPIO1_5 0x100 /* WP */ + MX51_PAD_GPIO1_6__GPIO1_6 0x100 /* CD */ >; }; pinctrl_fec: fecgrp { fsl,pins = < - MX51_PAD_EIM_EB2__FEC_MDIO 0x80000000 - MX51_PAD_EIM_EB3__FEC_RDATA1 0x80000000 - MX51_PAD_EIM_CS2__FEC_RDATA2 0x80000000 - MX51_PAD_EIM_CS3__FEC_RDATA3 0x80000000 - MX51_PAD_EIM_CS4__FEC_RX_ER 0x80000000 - MX51_PAD_EIM_CS5__FEC_CRS 0x80000000 - MX51_PAD_NANDF_RB2__FEC_COL 0x80000000 - MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x80000000 - MX51_PAD_NANDF_D9__FEC_RDATA0 0x80000000 - MX51_PAD_NANDF_D8__FEC_TDATA0 0x80000000 - MX51_PAD_NANDF_CS2__FEC_TX_ER 0x80000000 - MX51_PAD_NANDF_CS3__FEC_MDC 0x80000000 - MX51_PAD_NANDF_CS4__FEC_TDATA1 0x80000000 - MX51_PAD_NANDF_CS5__FEC_TDATA2 0x80000000 - MX51_PAD_NANDF_CS6__FEC_TDATA3 0x80000000 - MX51_PAD_NANDF_CS7__FEC_TX_EN 0x80000000 - MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000 - MX51_PAD_EIM_A20__GPIO2_14 0x85 /* Reset */ + MX51_PAD_EIM_EB2__FEC_MDIO 0x000001f5 + MX51_PAD_EIM_EB3__FEC_RDATA1 0x00000085 + MX51_PAD_EIM_CS2__FEC_RDATA2 0x00000085 + MX51_PAD_EIM_CS3__FEC_RDATA3 0x00000085 + MX51_PAD_EIM_CS4__FEC_RX_ER 0x00000180 + MX51_PAD_EIM_CS5__FEC_CRS 0x00000180 + MX51_PAD_NANDF_RB2__FEC_COL 0x00000180 + MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x00000180 + MX51_PAD_NANDF_D9__FEC_RDATA0 0x00002180 + MX51_PAD_NANDF_D8__FEC_TDATA0 0x00002004 + MX51_PAD_NANDF_CS2__FEC_TX_ER 0x00002004 + MX51_PAD_NANDF_CS3__FEC_MDC 0x00002004 + MX51_PAD_NANDF_CS4__FEC_TDATA1 0x00002004 + MX51_PAD_NANDF_CS5__FEC_TDATA2 0x00002004 + MX51_PAD_NANDF_CS6__FEC_TDATA3 0x00002004 + MX51_PAD_NANDF_CS7__FEC_TX_EN 0x00002004 + MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x00002180 + MX51_PAD_NANDF_D11__FEC_RX_DV 0x000020a4 + MX51_PAD_EIM_A20__GPIO2_14 0x00000085 /* Phy Reset */ + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX51_PAD_EIM_A27__GPIO2_21 0x5 >; }; @@ -379,6 +522,13 @@ >; }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX51_PAD_EIM_D19__I2C1_SCL 0x400001ed + MX51_PAD_EIM_D16__I2C1_SDA 0x400001ed + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed @@ -455,6 +605,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX51_PAD_GPIO1_8__GPIO1_8 0xe5 /* IRQ */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 @@ -479,71 +635,33 @@ MX51_PAD_EIM_D24__UART3_CTS 0x1c5 >; }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX51_PAD_USBH1_CLK__USBH1_CLK 0x80000000 + MX51_PAD_USBH1_DIR__USBH1_DIR 0x80000000 + MX51_PAD_USBH1_NXT__USBH1_NXT 0x80000000 + MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x80000000 + MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x80000000 + MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x80000000 + MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x80000000 + MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x80000000 + MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x80000000 + MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x80000000 + MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x80000000 + >; + }; + + pinctrl_usbh1reg: usbh1reggrp { + fsl,pins = < + MX51_PAD_EIM_D21__GPIO2_5 0x85 + >; + }; + + pinctrl_usbotgreg: usbotgreggrp { + fsl,pins = < + MX51_PAD_GPIO1_7__GPIO1_7 0x85 + >; + }; }; }; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; - - sgtl5000: codec@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&clk_26M>; - VDDA-supply = <&vdig_reg>; - VDDIO-supply = <&vvideo_reg>; - }; -}; - -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux>; - status = "okay"; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec>; - phy-mode = "mii"; - phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; - phy-reset-duration = <1>; - status = "okay"; -}; - -&kpp { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_kpp>; - linux,keymap = < - MATRIX_KEY(0, 0, KEY_UP) - MATRIX_KEY(0, 1, KEY_DOWN) - MATRIX_KEY(0, 2, KEY_VOLUMEDOWN) - MATRIX_KEY(0, 3, KEY_HOME) - MATRIX_KEY(1, 0, KEY_RIGHT) - MATRIX_KEY(1, 1, KEY_LEFT) - MATRIX_KEY(1, 2, KEY_ENTER) - MATRIX_KEY(1, 3, KEY_VOLUMEUP) - MATRIX_KEY(2, 0, KEY_F6) - MATRIX_KEY(2, 1, KEY_F8) - MATRIX_KEY(2, 2, KEY_F9) - MATRIX_KEY(2, 3, KEY_F10) - MATRIX_KEY(3, 0, KEY_F1) - MATRIX_KEY(3, 1, KEY_F2) - MATRIX_KEY(3, 2, KEY_F3) - MATRIX_KEY(3, 3, KEY_POWER) - >; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts new file mode 100644 index 000000000000..1db517d3d497 --- /dev/null +++ b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts @@ -0,0 +1,108 @@ +/* + * Copyright (C) 2014 Alexander Shiyan + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "imx51-digi-connectcore-som.dtsi" + +/ { + model = "Digi ConnectCore CC(W)-MX51 JSK"; + compatible = "digi,connectcore-ccxmx51-jsk", + "digi,connectcore-ccxmx51-som", "fsl,imx51"; + + chosen { + linux,stdout-path = &uart1; + }; +}; + +&owire { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_owire>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + dr_mode = "host"; + phy_type = "ulpi"; + disable-over-current; + status = "okay"; +}; + +&iomuxc { + imx51-digi-connectcore-jsk { + pinctrl_owire: owiregrp { + fsl,pins = < + MX51_PAD_OWIRE_LINE__OWIRE_LINE 0x40000000 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 + MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 + MX51_PAD_UART2_TXD__UART2_TXD 0x1c5 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 + MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5 + MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5 + MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5 + MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5 + MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5 + MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5 + MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5 + MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5 + MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5 + MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5 + MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5 + MX51_PAD_USBH1_STP__USBH1_STP 0x1e5 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi new file mode 100644 index 000000000000..321662f53e33 --- /dev/null +++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi @@ -0,0 +1,377 @@ +/* + * Copyright (C) 2014 Alexander Shiyan + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx51.dtsi" + +/ { + model = "Digi ConnectCore CC(W)-MX51"; + compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51"; + + memory { + reg = <0x90000000 0x08000000>; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + status = "okay"; + + pmic: mc13892@0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mc13892>; + compatible = "fsl,mc13892"; + spi-max-frequency = <16000000>; + spi-cs-high; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-rtc; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { }; + + viohi_reg: viohi { + regulator-always-on; + }; + + vpll_reg: vpll { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdig_reg: vdig { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + }; + + vsd_reg: vsd { + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vusb2_reg: vusb2 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + regulator-always-on; + }; + + vvideo_reg: vvideo { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + regulator-always-on; + }; + + vaudio_reg: vaudio { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vcam_reg: vcam { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vusb_reg: vusb { + regulator-always-on; + }; + + gpo1_reg: gpo1 { }; + + gpo2_reg: gpo2 { }; + + gpo3_reg: gpo3 { }; + + gpo4_reg: gpo4 { }; + + pwgt2spi_reg: pwgt2spi { + regulator-always-on; + }; + + vcoincell_reg: vcoincell { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + }; + }; +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2>; + cap-sdio-irq; + enable-sdio-wakeup; + keep-power-in-suspend; + max-frequency = <50000000>; + no-1-8-v; + non-removable; + vmmc-supply = <&gpo4_reg>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "mii"; + phy-supply = <&gpo3_reg>; + /* Pins shared with LCD2, keep status disabled */ +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <400000>; + status = "okay"; + + mma7455l@1d { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mma7455l>; + compatible = "fsl,mma7455l"; + reg = <0x1d>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>, <6 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&nfc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; +}; + +&usbotg { + phy_type = "utmi_wide"; + disable-over-current; + /* Device role is not known, keep status disabled */ +}; + +&weim { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weim>; + status = "okay"; + + lan9221: lan9221@5,0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lan9221>; + compatible = "smsc,lan9221", "smsc,lan9115"; + reg = <5 0x00000000 0x1000>; + fsl,weim-cs-timing = < + 0x00420081 0x00000000 + 0x32260000 0x00000000 + 0x72080f00 0x00000000 + >; + clocks = <&clks IMX5_CLK_DUMMY>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + phy-mode = "mii"; + reg-io-width = <2>; + smsc,irq-push-pull; + vdd33a-supply = <&gpo2_reg>; + vddvario-supply = <&gpo2_reg>; + }; +}; + +&iomuxc { + imx51-digi-connectcore-som { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */ + >; + }; + + pinctrl_esdhc2: esdhc2grp { + fsl,pins = < + MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5 + MX51_PAD_SD2_CLK__SD2_CLK 0x20d5 + MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5 + MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5 + MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5 + MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000 + MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000 + MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000 + MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000 + MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000 + MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000 + MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000 + MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000 + MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000 + MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000 + MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000 + MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000 + MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000 + MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000 + MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000 + MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000 + MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000 + MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX51_PAD_GPIO1_2__I2C2_SCL 0x400001ed + MX51_PAD_GPIO1_3__I2C2_SDA 0x400001ed + >; + }; + + pinctrl_nfc: nfcgrp { + fsl,pins = < + MX51_PAD_NANDF_D0__NANDF_D0 0x80000000 + MX51_PAD_NANDF_D1__NANDF_D1 0x80000000 + MX51_PAD_NANDF_D2__NANDF_D2 0x80000000 + MX51_PAD_NANDF_D3__NANDF_D3 0x80000000 + MX51_PAD_NANDF_D4__NANDF_D4 0x80000000 + MX51_PAD_NANDF_D5__NANDF_D5 0x80000000 + MX51_PAD_NANDF_D6__NANDF_D6 0x80000000 + MX51_PAD_NANDF_D7__NANDF_D7 0x80000000 + MX51_PAD_NANDF_ALE__NANDF_ALE 0x80000000 + MX51_PAD_NANDF_CLE__NANDF_CLE 0x80000000 + MX51_PAD_NANDF_RE_B__NANDF_RE_B 0x80000000 + MX51_PAD_NANDF_WE_B__NANDF_WE_B 0x80000000 + MX51_PAD_NANDF_WP_B__NANDF_WP_B 0x80000000 + MX51_PAD_NANDF_CS0__NANDF_CS0 0x80000000 + MX51_PAD_NANDF_RB0__NANDF_RB0 0x80000000 + >; + }; + + pinctrl_lan9221: lan9221grp { + fsl,pins = < + MX51_PAD_GPIO1_9__GPIO1_9 0xe5 /* IRQ */ + >; + }; + + pinctrl_mc13892: mc13892grp { + fsl,pins = < + MX51_PAD_GPIO1_5__GPIO1_5 0xe5 /* IRQ */ + >; + }; + + pinctrl_mma7455l: mma7455lgrp { + fsl,pins = < + MX51_PAD_GPIO1_7__GPIO1_7 0xe5 /* IRQ1 */ + MX51_PAD_GPIO1_6__GPIO1_6 0xe5 /* IRQ2 */ + >; + }; + + pinctrl_weim: weimgrp { + fsl,pins = < + MX51_PAD_EIM_DA0__EIM_DA0 0x80000000 + MX51_PAD_EIM_DA1__EIM_DA1 0x80000000 + MX51_PAD_EIM_DA2__EIM_DA2 0x80000000 + MX51_PAD_EIM_DA3__EIM_DA3 0x80000000 + MX51_PAD_EIM_DA4__EIM_DA4 0x80000000 + MX51_PAD_EIM_DA5__EIM_DA5 0x80000000 + MX51_PAD_EIM_DA6__EIM_DA6 0x80000000 + MX51_PAD_EIM_DA7__EIM_DA7 0x80000000 + MX51_PAD_EIM_DA8__EIM_DA8 0x80000000 + MX51_PAD_EIM_DA9__EIM_DA9 0x80000000 + MX51_PAD_EIM_DA10__EIM_DA10 0x80000000 + MX51_PAD_EIM_DA11__EIM_DA11 0x80000000 + MX51_PAD_EIM_DA12__EIM_DA12 0x80000000 + MX51_PAD_EIM_DA13__EIM_DA13 0x80000000 + MX51_PAD_EIM_DA14__EIM_DA14 0x80000000 + MX51_PAD_EIM_DA15__EIM_DA15 0x80000000 + MX51_PAD_EIM_A16__EIM_A16 0x80000000 + MX51_PAD_EIM_A17__EIM_A17 0x80000000 + MX51_PAD_EIM_A18__EIM_A18 0x80000000 + MX51_PAD_EIM_A19__EIM_A19 0x80000000 + MX51_PAD_EIM_A20__EIM_A20 0x80000000 + MX51_PAD_EIM_A21__EIM_A21 0x80000000 + MX51_PAD_EIM_A22__EIM_A22 0x80000000 + MX51_PAD_EIM_A23__EIM_A23 0x80000000 + MX51_PAD_EIM_A24__EIM_A24 0x80000000 + MX51_PAD_EIM_A25__EIM_A25 0x80000000 + MX51_PAD_EIM_A26__EIM_A26 0x80000000 + MX51_PAD_EIM_A27__EIM_A27 0x80000000 + MX51_PAD_EIM_D16__EIM_D16 0x80000000 + MX51_PAD_EIM_D17__EIM_D17 0x80000000 + MX51_PAD_EIM_D18__EIM_D18 0x80000000 + MX51_PAD_EIM_D19__EIM_D19 0x80000000 + MX51_PAD_EIM_D20__EIM_D20 0x80000000 + MX51_PAD_EIM_D21__EIM_D21 0x80000000 + MX51_PAD_EIM_D22__EIM_D22 0x80000000 + MX51_PAD_EIM_D23__EIM_D23 0x80000000 + MX51_PAD_EIM_D24__EIM_D24 0x80000000 + MX51_PAD_EIM_D25__EIM_D25 0x80000000 + MX51_PAD_EIM_D26__EIM_D26 0x80000000 + MX51_PAD_EIM_D27__EIM_D27 0x80000000 + MX51_PAD_EIM_D28__EIM_D28 0x80000000 + MX51_PAD_EIM_D29__EIM_D29 0x80000000 + MX51_PAD_EIM_D30__EIM_D30 0x80000000 + MX51_PAD_EIM_D31__EIM_D31 0x80000000 + MX51_PAD_EIM_OE__EIM_OE 0x80000000 + MX51_PAD_EIM_DTACK__EIM_DTACK 0x80000000 + MX51_PAD_EIM_LBA__EIM_LBA 0x80000000 + MX51_PAD_EIM_CS5__EIM_CS5 0x80000000 /* CS5 */ + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi index 9b3acf6e4282..63164266af83 100644 --- a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi +++ b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi @@ -42,6 +42,17 @@ compatible = "nxp,pcf8563"; reg = <0x51>; }; + + tsc2007: tsc2007@49 { + compatible = "ti,tsc2007"; + gpios = <&gpio4 0 1>; + interrupt-parent = <&gpio4>; + interrupts = <0x0 0x8>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc2007_1>; + reg = <0x49>; + ti,x-plate-ohms = <180>; + }; }; &iomuxc { diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index 5cec4f322096..75e66c9c6144 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -24,6 +24,14 @@ model = "Eukrea CPUIMX51"; compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51"; + clocks { + clk24M: can_clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + }; + gpio_keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -50,6 +58,23 @@ }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_can: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "CAN_RST"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + startup-delay-us = <20000>; + enable-active-high; + }; + }; + sound { compatible = "eukrea,asoc-tlv320"; eukrea,model = "imx51-eukrea-tlv320aic23"; @@ -57,6 +82,20 @@ fsl,mux-int-port = <2>; fsl,mux-ext-port = <3>; }; + + usbphy { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-bus"; + + usbh1phy: usbh1phy@0 { + compatible = "usb-nop-xceiv"; + reg = <0>; + clocks = <&clks IMX5_CLK_USB_PHY_GATE>; + clock-names = "main_clk"; + clock-frequency = <19200000>; + }; + }; }; &audmux { @@ -72,6 +111,26 @@ status = "okay"; }; +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; + status = "okay"; + + can0: can@0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can>; + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&clk24M>; + spi-max-frequency = <10000000>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <®_can>; + }; +}; + &i2c1 { tlv320aic23: codec@1a { compatible = "ti,tlv320aic23"; @@ -90,6 +149,23 @@ >; }; + + pinctrl_can: cangrp { + fsl,pins = < + MX51_PAD_CSI2_PIXCLK__GPIO4_15 0x80000000 /* nReset */ + MX51_PAD_GPIO1_1__GPIO1_1 0x80000000 /* IRQ */ + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x80000000 /* CS0 */ + >; + }; + pinctrl_esdhc1: esdhc1grp { fsl,pins = < MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 @@ -151,6 +227,29 @@ MX51_PAD_CSI1_D9__GPIO3_13 0x1f5 >; }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5 + MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5 + MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5 + MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5 + MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5 + MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5 + MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5 + MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5 + MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5 + MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5 + MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5 + MX51_PAD_USBH1_STP__USBH1_STP 0x1e5 + >; + }; + + pinctrl_usbh1_vbus: usbh1-vbusgrp { + fsl,pins = < + MX51_PAD_EIM_CS3__GPIO2_28 0x1f5 + >; + }; }; }; @@ -173,3 +272,24 @@ fsl,uart-has-rtscts; status = "okay"; }; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + fsl,usbphy = <&usbh1phy>; + dr_mode = "host"; + phy_type = "ulpi"; + status = "okay"; +}; + +&usbotg { + dr_mode = "otg"; + phy_type = "utmi_wide"; + status = "okay"; +}; + +&usbphy0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 150bb4e2f744..bebbf3ba0d5e 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -19,6 +19,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -537,6 +538,8 @@ }; nfc: nand@83fdb000 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,imx51-nand"; reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>; interrupts = <8>; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index 7c8c12969892..3f2400b8560b 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -17,6 +17,10 @@ model = "TQ MBa53 starter kit"; compatible = "tq,mba53", "tq,tqma53", "fsl,imx53"; + chosen { + stdout-path = &uart2; + }; + backlight { compatible = "pwm-backlight"; pwms = <&pwm2 0 50000>; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index ede04fa4161f..fd8c60dde7de 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -13,6 +13,10 @@ #include "imx53.dtsi" / { + chosen { + stdout-path = &uart1; + }; + memory { reg = <0x70000000 0x20000000>, <0xb0000000 0x20000000>; @@ -272,6 +276,14 @@ >; }; + pinctrl_vga_sync: vgasync-grp { + fsl,pins = < + /* VGA_HSYNC, VSYNC with max drive strength */ + MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6 + MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4 @@ -281,6 +293,15 @@ }; }; +&tve { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vga_sync>; + fsl,tve-mode = "vga"; + fsl,hsync-pin = <4>; + fsl,vsync-pin = <6>; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 9c2bff2252d0..375e66fad578 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -18,6 +18,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -726,8 +727,8 @@ clocks = <&clks IMX5_CLK_VPU_GATE>, <&clks IMX5_CLK_VPU_GATE>; clock-names = "per", "ahb"; + resets = <&src 1>; iram = <&ocram>; - status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index 5bfae54fb780..5373a5f2782b 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -11,6 +11,10 @@ model = "SolidRun HummingBoard DL/Solo"; compatible = "solidrun,hummingboard", "fsl,imx6dl"; + chosen { + stdout-path = &uart1; + }; + ir_recv: ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio1 2 1>; @@ -67,6 +71,13 @@ status = "okay"; }; +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_i2c1>; @@ -82,6 +93,13 @@ */ }; +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_i2c2>; + status = "okay"; +}; + &iomuxc { hummingboard { pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 { @@ -97,6 +115,12 @@ >; }; + pinctrl_hummingboard_hdmi: hummingboard-hdmi { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + pinctrl_hummingboard_i2c1: hummingboard-i2c1 { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 @@ -104,6 +128,13 @@ >; }; + pinctrl_hummingboard_i2c2: hummingboard-i2c2 { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + pinctrl_hummingboard_spdif: hummingboard-spdif { fsl,pins = ; }; diff --git a/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts b/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts new file mode 100644 index 000000000000..08e97801494e --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts @@ -0,0 +1,19 @@ +/* + * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6dl-phytec-pfla02.dtsi" +#include "imx6qdl-phytec-pbab01.dtsi" + +/ { + model = "Phytec phyFLEX-i.MX6 DualLite/Solo Carrier-Board"; + compatible = "phytec,imx6dl-pbab01", "phytec,imx6dl-pfla02", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi new file mode 100644 index 000000000000..964bc2ad3c5d --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi @@ -0,0 +1,22 @@ +/* + * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "imx6dl.dtsi" +#include "imx6qdl-phytec-pfla02.dtsi" + +/ { + model = "Phytec phyFLEX-i.MX6 DualLite/Solo"; + compatible = "phytec,imx6dl-pfla02", "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x20000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts new file mode 100644 index 000000000000..909fafc0b650 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -0,0 +1,539 @@ +/* + * Copyright 2014 Iain Paton + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include + +/ { + model = "RIoTboard i.MX6S"; + compatible = "riot,imx6s-riotboard", "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_2p5v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + led0: user1 { + label = "user1"; + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led1: user2 { + label = "user2"; + gpios = <&gpio3 28 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx6-riotboard-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 31 0>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + pmic: pf0100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + interrupt-parent = <&gpio5>; + interrupts = <16 8>; + + regulators { + reg_vddcore: sw1ab { /* VDDARM_IN */ + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + reg_vddsoc: sw1c { /* VDDSOC_IN */ + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + reg_gen_3v3: sw2 { /* VDDHIGH_IN */ + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_ddr_1v5a: sw3a { /* NVCC_DRAM, NVCC_RGMII */ + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + reg_ddr_1v5b: sw3b { /* NVCC_DRAM, NVCC_RGMII */ + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + reg_ddr_vtt: sw4 { /* MIPI conn */ + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + reg_5v_600mA: swbst { /* not used */ + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + reg_snvs_3v: vsnvs { /* VDD_SNVS_IN */ + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vref_reg: vrefddr { /* VREF_DDR */ + regulator-boot-on; + regulator-always-on; + }; + + reg_vgen1_1v5: vgen1 { /* not used */ + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + reg_vgen2_1v2_eth: vgen2 { /* pcie ? */ + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + reg_vgen3_2v8: vgen3 { /* not used */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + reg_vgen4_1v8: vgen4 { /* NVCC_SD3 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen5_2v5_sgtl: vgen5 { /* Pwr LED & 5V0_delayed enable */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen6_3v3: vgen6 { /* #V#_DELAYED enable, MIPI */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + clocks = <&clks 116>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + dr_mode = "otg"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio1 4 0>; + wp-gpios = <&gpio1 2 0>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 0>; + wp-gpios = <&gpio7 1 0>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + vmmc-supply = <®_3p3v>; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + + imx6-riotboard { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x8000000 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x8000000 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x8000000 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x8000000 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* CAM_MCLK */ + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x000b1 /* CS0 */ + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x000b1 /* CS1 */ + MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000b1 /* CS0 */ + MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1 /* CS0 */ + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x000b1 /* CS1 */ + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 /* AR8035 pin strapping: IO voltage: pull up */ + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0 /* AR8035 pin strapping: PHYADDR#0: pull down */ + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x130b0 /* AR8035 pin strapping: PHYADDR#1: pull down */ + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 /* AR8035 pin strapping: MODE#1: pull up */ + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 /* AR8035 pin strapping: MODE#3: pull up */ + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 /* AR8035 pin strapping: MODE#0: pull down */ + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000 /* GPIO16 -> AR8035 25MHz */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */ + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* AR8035 interrupt */ + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000 /* user led0 */ + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x80000000 /* user led1 */ + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */ + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x80000000 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 /* SD2 CD */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* SD2 WP */ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3 CD */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x80000000 /* SD3 WP */ + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x80000000 /* SD4 RST (eMMC) */ + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 5c5f574330f9..0a9c49d69d41 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -84,9 +84,10 @@ i2c4: i2c@021f8000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx1-i2c"; + compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; reg = <0x021f8000 0x4000>; interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 116>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index e4ae38fd0269..e0302636aff5 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -18,6 +18,10 @@ model = "Data Modul eDM-QMX6 Board"; compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q"; + chosen { + stdout-path = &uart2; + }; + aliases { gpio7 = &stmpe_gpio1; gpio8 = &stmpe_gpio2; @@ -91,6 +95,20 @@ }; }; +&ecspi5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi5>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio1 12 0>; + status = "okay"; + + flash: m25p80@0 { + compatible = "m25p80"; + spi-max-frequency = <40000000>; + reg = <0>; + }; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; @@ -105,7 +123,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2 &pinctrl_stmpe1 - &pinctrl_stmpe2>; + &pinctrl_stmpe2 + &pinctrl_pfuze>; status = "okay"; pmic: pfuze100@08 { @@ -216,6 +235,8 @@ reg = <0x40>; interrupts = <30 0>; interrupt-parent = <&gpio3>; + vcc-supply = <&sw2_reg>; + vio-supply = <&sw2_reg>; stmpe_gpio1: stmpe_gpio { #gpio-cells = <2>; @@ -228,6 +249,8 @@ reg = <0x44>; interrupts = <2 0>; interrupt-parent = <&gpio5>; + vcc-supply = <&sw2_reg>; + vio-supply = <&sw2_reg>; stmpe_gpio2: stmpe_gpio { #gpio-cells = <2>; @@ -263,6 +286,15 @@ >; }; + pinctrl_ecspi5: ecspi5rp-1 { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000 + MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x80000000 + MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x80000000 + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x80000000 + >; + }; + pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 @@ -291,6 +323,12 @@ >; }; + pinctrl_pfuze: pfuze100grp1 { + fsl,pins = < + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000 + >; + }; + pinctrl_stmpe1: stmpe1grp { fsl,pins = ; }; diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts index 4a9b4dc9afc0..703539cf36d3 100644 --- a/arch/arm/boot/dts/imx6q-gk802.dts +++ b/arch/arm/boot/dts/imx6q-gk802.dts @@ -14,7 +14,7 @@ compatible = "zealz,imx6q-gk802", "fsl,imx6q"; chosen { - linux,stdout-path = &uart4; + stdout-path = &uart4; }; memory { @@ -48,6 +48,11 @@ }; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + /* Internal I2C */ &i2c2 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index e51bb3f0fd56..3689eaa58826 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -157,6 +157,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts index 5607c331fca8..c139ac0ebe15 100644 --- a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts +++ b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts @@ -11,40 +11,17 @@ /dts-v1/; #include "imx6q-phytec-pfla02.dtsi" +#include "imx6qdl-phytec-pbab01.dtsi" / { model = "Phytec phyFLEX-i.MX6 Quad Carrier-Board"; compatible = "phytec,imx6q-pbab01", "phytec,imx6q-pfla02", "fsl,imx6q"; -}; -&fec { - status = "okay"; -}; - -&gpmi { - status = "okay"; + chosen { + stdout-path = &uart4; + }; }; &sata { - status = "okay"; -}; - -&uart4 { - status = "okay"; -}; - -&usbh1 { - status = "okay"; -}; - -&usbotg { - status = "okay"; -}; - -&usdhc2 { - status = "okay"; -}; - -&usdhc3 { - status = "okay"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi index 324f1550976b..cd20d0a948de 100644 --- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi @@ -10,316 +10,13 @@ */ #include "imx6q.dtsi" +#include "imx6qdl-phytec-pfla02.dtsi" / { - model = "Phytec phyFLEX-i.MX6 Ouad"; + model = "Phytec phyFLEX-i.MX6 Quad"; compatible = "phytec,imx6q-pfla02", "fsl,imx6q"; memory { reg = <0x10000000 0x80000000>; }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb_otg_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 15 0>; - }; - - reg_usb_h1_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 0 0>; - }; - }; -}; - -&ecspi3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi3>; - status = "okay"; - fsl,spi-num-chipselects = <1>; - cs-gpios = <&gpio4 24 0>; - - flash@0 { - compatible = "m25p80"; - spi-max-frequency = <20000000>; - reg = <0>; - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - eeprom@50 { - compatible = "atmel,24c32"; - reg = <0x50>; - }; - - pmic@58 { - compatible = "dialog,da9063"; - reg = <0x58>; - interrupt-parent = <&gpio4>; - interrupts = <17 0x8>; /* active-low GPIO4_17 */ - - regulators { - vddcore_reg: bcore1 { - regulator-min-microvolt = <730000>; - regulator-max-microvolt = <1380000>; - regulator-always-on; - }; - - vddsoc_reg: bcore2 { - regulator-min-microvolt = <730000>; - regulator-max-microvolt = <1380000>; - regulator-always-on; - }; - - vdd_ddr3_reg: bpro { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - }; - - vdd_3v3_reg: bperi { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_buckmem_reg: bmem { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_eth_reg: bio { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vdd_eth_io_reg: ldo4 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - - vdd_mx6_snvs_reg: ldo5 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - vdd_3v3_pmic_io_reg: ldo6 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_sd0_reg: ldo9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vdd_sd1_reg: ldo10 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vdd_mx6_high_reg: ldo11 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - }; - }; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - imx6q-phytec-pfla02 { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 - MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */ - MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */ - >; - }; - - pinctrl_ecspi3: ecspi3grp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 - MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 - MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 - >; - }; - - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 - MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 - >; - }; - - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; - - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_usbh1: usbh1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x80000000 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - >; - }; - - pinctrl_usdhc3_cdwp: usdhc3cdwp { - fsl,pins = < - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 - >; - }; - }; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 23 0>; - status = "disabled"; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; - nand-on-flash-bbt; - status = "disabled"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4>; - status = "disabled"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1>; - status = "disabled"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "disabled"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio1 4 0>; - wp-gpios = <&gpio1 2 0>; - status = "disabled"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3 - &pinctrl_usdhc3_cdwp>; - cd-gpios = <&gpio1 27 0>; - wp-gpios = <&gpio1 29 0>; - status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts index ed397d149ab6..6c561060bf5c 100644 --- a/arch/arm/boot/dts/imx6q-udoo.dts +++ b/arch/arm/boot/dts/imx6q-udoo.dts @@ -16,6 +16,10 @@ model = "Udoo i.MX6 Quad Board"; compatible = "udoo,imx6q-udoo", "fsl,imx6q"; + chosen { + stdout-path = &uart2; + }; + memory { reg = <0x10000000 0x40000000>; }; @@ -28,6 +32,18 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + &iomuxc { imx6q-udoo { pinctrl_enet: enetgrp { @@ -51,6 +67,13 @@ >; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index c2a24888a276..25da82a03110 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -55,6 +55,20 @@ }; }; +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_i2c2>; + status = "okay"; +}; + &i2c3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cubox_i_i2c3>; @@ -69,6 +83,19 @@ &iomuxc { cubox_i { + pinctrl_cubox_i_hdmi: cubox-i-hdmi { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_cubox_i_i2c2: cubox-i-i2c2 { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + pinctrl_cubox_i_i2c3: cubox-i-i2c3 { fsl,pins = < MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi index 25cf035dd36e..2c253d6d20bd 100644 --- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi @@ -22,7 +22,7 @@ }; chosen { - linux,stdout-path = &uart1; + stdout-path = &uart1; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 98a422153ce7..31665adcbf39 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -101,6 +101,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 035d3a85c318..367af3ec9435 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -27,6 +27,13 @@ bootargs = "console=ttymxc1,115200"; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; + leds { compatible = "gpio-leds"; @@ -148,6 +155,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -394,6 +406,12 @@ >; }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -436,6 +454,27 @@ &ldb { status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; + }; }; &pcie { @@ -443,6 +482,12 @@ status = "okay"; }; +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + &ssi1 { fsl,mode = "i2s-slave"; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index c8e5ae06deaf..c91b5a6c769b 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -30,6 +30,13 @@ bootargs = "console=ttymxc1,115200"; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; + leds { compatible = "gpio-leds"; @@ -157,6 +164,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -434,6 +446,12 @@ >; }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -508,6 +526,12 @@ }; }; +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + &ssi1 { fsl,mode = "i2s-slave"; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 2795dfc8c926..698d3063b295 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -30,6 +30,13 @@ bootargs = "console=ttymxc1,115200"; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; + leds { compatible = "gpio-leds"; @@ -147,6 +154,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -456,6 +468,12 @@ >; }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -530,6 +548,12 @@ }; }; +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + &ssi1 { fsl,mode = "i2s-slave"; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 99be301b5232..4c4b17596c8b 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -14,6 +14,10 @@ #include / { + chosen { + stdout-path = &uart2; + }; + memory { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi new file mode 100644 index 000000000000..584721264121 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -0,0 +1,102 @@ +/* + * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/ { + chosen { + linux,stdout-path = &uart4; + }; +}; + +&fec { + status = "okay"; +}; + +&gpmi { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + tlv320@18 { + compatible = "ti,tlv320aic3x"; + reg = <0x18>; + }; + + stmpe@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + }; + + rtc@51 { + compatible = "nxp,rtc8564"; + reg = <0x51>; + }; + + adc@64 { + compatible = "maxim,max1037"; + reg = <0x64>; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <100000>; + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usdhc2 { + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi new file mode 100644 index 000000000000..faa3494a69d4 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -0,0 +1,356 @@ +/* + * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include + +/ { + model = "Phytec phyFLEX-i.MX6 Ouad"; + compatible = "phytec,imx6q-pfla02", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x80000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 15 0>; + }; + + reg_usb_h1_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 0 0>; + }; + }; + + gpio_leds: leds { + compatible = "gpio-leds"; + + green { + label = "phyflex:green"; + gpios = <&gpio1 30 0>; + }; + + red { + label = "phyflex:red"; + gpios = <&gpio2 31 0>; + }; + }; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + status = "okay"; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 24 0>; + + flash@0 { + compatible = "m25p80"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + + pmic@58 { + compatible = "dialog,da9063"; + reg = <0x58>; + interrupt-parent = <&gpio4>; + interrupts = <17 0x8>; /* active-low GPIO4_17 */ + + regulators { + vddcore_reg: bcore1 { + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1380000>; + regulator-always-on; + }; + + vddsoc_reg: bcore2 { + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1380000>; + regulator-always-on; + }; + + vdd_ddr3_reg: bpro { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + vdd_3v3_reg: bperi { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_buckmem_reg: bmem { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_eth_reg: bio { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd_eth_io_reg: ldo4 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vdd_mx6_snvs_reg: ldo5 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vdd_3v3_pmic_io_reg: ldo6 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_sd0_reg: ldo9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_sd1_reg: ldo10 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_mx6_high_reg: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + }; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6q-phytec-pfla02 { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */ + MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */ + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */ + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */ + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x80000000 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3_cdwp: usdhc3cdwp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 + >; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + status = "disabled"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "disabled"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "disabled"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + status = "disabled"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "disabled"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio1 4 0>; + wp-gpios = <&gpio1 2 0>; + status = "disabled"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3 + &pinctrl_usdhc3_cdwp>; + cd-gpios = <&gpio1 27 0>; + wp-gpios = <&gpio1 29 0>; + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 3bec128c7971..6df6127bf835 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -13,6 +13,10 @@ #include / { + chosen { + stdout-path = &uart2; + }; + memory { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 0d816d3be4b6..40ea36534643 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -14,6 +14,10 @@ #include / { + chosen { + stdout-path = &uart1; + }; + memory { reg = <0x10000000 0x40000000>; }; @@ -105,6 +109,17 @@ default-brightness-level = <7>; status = "okay"; }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + red { + gpios = <&gpio1 2 0>; + default-state = "on"; + }; + }; }; &audmux { @@ -137,6 +152,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -373,6 +393,12 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 @@ -421,6 +447,29 @@ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 >; }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + }; + + gpio_leds { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 + >; + }; }; }; @@ -449,6 +498,13 @@ }; }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio7 12 0>; + status = "okay"; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; @@ -496,3 +552,12 @@ wp-gpios = <&gpio2 1 0>; status = "okay"; }; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index bdfdf89d405f..5c6f10c43f65 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -62,6 +62,18 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c1>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + &i2c2 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -127,6 +139,13 @@ >; }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index eca0971d4db1..ce0599134a69 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -16,6 +16,7 @@ / { aliases { + ethernet0 = &fec; can0 = &can1; can1 = &can2; gpio0 = &gpio1; @@ -140,15 +141,16 @@ 0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; - interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; + interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>; - clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi"; + clocks = <&clks 144>, <&clks 206>, <&clks 189>; + clock-names = "pcie", "pcie_bus", "pcie_phy"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index d26b099260a3..2d4e5285f3f3 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -14,6 +14,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; diff --git a/arch/arm/boot/dts/vf610-colibri.dts b/arch/arm/boot/dts/vf610-colibri.dts new file mode 100644 index 000000000000..aecc7dbc65e8 --- /dev/null +++ b/arch/arm/boot/dts/vf610-colibri.dts @@ -0,0 +1,123 @@ +/* + * Copyright 2014 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "Toradex Colibri VF61 COM"; + compatible = "toradex,vf610-colibri", "fsl,vf610"; + + chosen { + bootargs = "console=ttyLP0,115200"; + }; + + memory { + reg = <0x80000000 0x10000000>; + }; + + clocks { + enet_ext { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + }; + +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; +}; + +&L2 { + arm,data-latency = <2 1 2>; + arm,tag-latency = <3 2 3>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&iomuxc { + vf610-colibri { + pinctrl_esdhc1: esdhc1grp { + fsl,fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTB20__GPIO_42 0x219d + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB4__UART1_TX 0x21a2 + VF610_PAD_PTB5__UART1_RX 0x21a1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + VF610_PAD_PTD2__UART2_RTS 0x21a2 + VF610_PAD_PTD3__UART2_CTS 0x21a1 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index ded361075aab..11d733406c7e 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -113,6 +113,13 @@ }; }; +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + &fec0 { phy-mode = "rmii"; pinctrl-names = "default"; @@ -160,6 +167,18 @@ >; }; + pinctrl_esdhc1: esdhc1grp { + fsl,fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTA7__GPIO_134 0x219d + >; + }; + pinctrl_fec0: fec0grp { fsl,pins = < VF610_PAD_PTA6__RMII_CLKIN 0x30d1 @@ -196,6 +215,17 @@ >; }; + pinctrl_pwm0: pwm0grp { + fsl,pins = < + VF610_PAD_PTB0__FTM0_CH0 0x1582 + VF610_PAD_PTB1__FTM0_CH1 0x1582 + VF610_PAD_PTB2__FTM0_CH2 0x1582 + VF610_PAD_PTB3__FTM0_CH3 0x1582 + VF610_PAD_PTB6__FTM0_CH6 0x1582 + VF610_PAD_PTB7__FTM0_CH7 0x1582 + >; + }; + pinctrl_sai2: sai2grp { fsl,pins = < VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed @@ -217,6 +247,12 @@ }; }; +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0>; + status = "okay"; +}; + &sai2 { #sound-dai-cells = <0>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index b8ce0aa7b157..73355ddc5186 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -183,6 +183,19 @@ clock-names = "pit"; }; + pwm0: pwm@40038000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x40038000 0x1000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clks VF610_CLK_FTM0>, + <&clks VF610_CLK_FTM0_EXT_SEL>, + <&clks VF610_CLK_FTM0_FIX_SEL>, + <&clks VF610_CLK_FTM0_EXT_FIX_EN>; + status = "disabled"; + }; + adc0: adc@4003b000 { compatible = "fsl,vf610-adc"; reg = <0x4003b000 0x1000>; @@ -347,6 +360,17 @@ status = "disabled"; }; + esdhc1: esdhc@400b2000 { + compatible = "fsl,imx53-esdhc"; + reg = <0x400b2000 0x4000>; + interrupts = <0 28 0x04>; + clocks = <&clks VF610_CLK_IPG_BUS>, + <&clks VF610_CLK_PLATFORM_BUS>, + <&clks VF610_CLK_ESDHC1>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + fec0: ethernet@400d0000 { compatible = "fsl,mvf600-fec"; reg = <0x400d0000 0x1000>;