UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

IIO: Change msleep to usleep_range for small msecs 

msleep(1~20) may not do what the caller intends, and will often sleep longer.
(~20 ms actual sleep for any value given in the 1~20ms range)
This is not the desired behaviour for many cases like device resume time,
device suspend time, device enable time, data reading time, etc.
Thus, change msleep to usleep_range for precise wakeups.

Signed-off-by: Aniroop Mathur <a.mathur@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit is contained in:
Aniroop Mathur 2016-11-26 09:17:26 +05:30 committed by Jonathan Cameron
parent 160d95870c
commit 071cf24943
12 changed files with 18 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/iio/adc/exynos_adc.c
View File

@ -632,7 +632,7 @@ static irqreturn_t exynos_ts_isr(int irq, void *dev_id)
input_report_key(info->input, BTN_TOUCH, 1);
input_sync(info->input);
msleep(1);
usleep_range(1000, 1100);
};
writel(0, ADC_V1_CLRINTPNDNUP(info->regs));

14
drivers/iio/pressure/bmp280-core.c
View File

@ -65,7 +65,7 @@ struct bmp280_data {
struct bmp180_calib calib;
struct regulator *vddd;
struct regulator *vdda;
unsigned int start_up_time; /* in milliseconds */
unsigned int start_up_time; /* in microseconds */
/* log of base 2 of oversampling rate */
u8 oversampling_press;
@ -935,14 +935,14 @@ int bmp280_common_probe(struct device *dev,
data->chip_info = &bmp180_chip_info;
data->oversampling_press = ilog2(8);
data->oversampling_temp = ilog2(1);
data->start_up_time = 10;
data->start_up_time = 10000;
break;
case BMP280_CHIP_ID:
indio_dev->num_channels = 2;
data->chip_info = &bmp280_chip_info;
data->oversampling_press = ilog2(16);
data->oversampling_temp = ilog2(2);
data->start_up_time = 2;
data->start_up_time = 2000;
break;
case BME280_CHIP_ID:
indio_dev->num_channels = 3;
@ -950,7 +950,7 @@ int bmp280_common_probe(struct device *dev,
data->oversampling_press = ilog2(16);
data->oversampling_humid = ilog2(16);
data->oversampling_temp = ilog2(2);
data->start_up_time = 2;
data->start_up_time = 2000;
break;
default:
return -EINVAL;
@ -979,7 +979,7 @@ int bmp280_common_probe(struct device *dev,
goto out_disable_vddd;
}
/* Wait to make sure we started up properly */
mdelay(data->start_up_time);
usleep_range(data->start_up_time, data->start_up_time + 100);
/* Bring chip out of reset if there is an assigned GPIO line */
gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
@ -1038,7 +1038,7 @@ int bmp280_common_probe(struct device *dev,
* Set autosuspend to two orders of magnitude larger than the
* start-up time.
*/
pm_runtime_set_autosuspend_delay(dev, data->start_up_time *100);
pm_runtime_set_autosuspend_delay(dev, data->start_up_time / 10);
pm_runtime_use_autosuspend(dev);
pm_runtime_put(dev);
@ -1101,7 +1101,7 @@ static int bmp280_runtime_resume(struct device *dev)
ret = regulator_enable(data->vdda);
if (ret)
return ret;
msleep(data->start_up_time);
usleep_range(data->start_up_time, data->start_up_time + 100);
return data->chip_info->chip_config(data);
}
#endif /* CONFIG_PM */

2
drivers/staging/iio/meter/ade7753.c
View File

@ -377,7 +377,7 @@ static int ade7753_initial_setup(struct iio_dev *indio_dev)
}
ade7753_reset(dev);
msleep(ADE7753_STARTUP_DELAY);
usleep_range(ADE7753_STARTUP_DELAY, ADE7753_STARTUP_DELAY + 100);
err_ret:
return ret;

2
drivers/staging/iio/meter/ade7753.h
View File

@ -49,7 +49,7 @@
#define ADE7753_MAX_TX 4
#define ADE7753_MAX_RX 4
#define ADE7753_STARTUP_DELAY 1
#define ADE7753_STARTUP_DELAY 1000
#define ADE7753_SPI_SLOW (u32)(300 * 1000)
#define ADE7753_SPI_BURST (u32)(1000 * 1000)

2
drivers/staging/iio/meter/ade7754.c
View File

@ -389,7 +389,7 @@ static int ade7754_initial_setup(struct iio_dev *indio_dev)
}
ade7754_reset(dev);
msleep(ADE7754_STARTUP_DELAY);
usleep_range(ADE7754_STARTUP_DELAY, ADE7754_STARTUP_DELAY + 100);
err_ret:
return ret;

2
drivers/staging/iio/meter/ade7754.h
View File

@ -67,7 +67,7 @@
#define ADE7754_MAX_TX 4
#define ADE7754_MAX_RX 4
#define ADE7754_STARTUP_DELAY 1
#define ADE7754_STARTUP_DELAY 1000
#define ADE7754_SPI_SLOW (u32)(300 * 1000)
#define ADE7754_SPI_BURST (u32)(1000 * 1000)

2
drivers/staging/iio/meter/ade7758.h
View File

@ -89,7 +89,7 @@
#define ADE7758_MAX_TX 8
#define ADE7758_MAX_RX 4
#define ADE7758_STARTUP_DELAY 1
#define ADE7758_STARTUP_DELAY 1000
#define AD7758_NUM_WAVSEL 5
#define AD7758_NUM_PHSEL 3

2
drivers/staging/iio/meter/ade7758_core.c
View File

@ -459,7 +459,7 @@ static int ade7758_initial_setup(struct iio_dev *indio_dev)
}
ade7758_reset(dev);
msleep(ADE7758_STARTUP_DELAY);
usleep_range(ADE7758_STARTUP_DELAY, ADE7758_STARTUP_DELAY + 100);
err_ret:
return ret;

2
drivers/staging/iio/meter/ade7759.c
View File

@ -338,7 +338,7 @@ static int ade7759_initial_setup(struct iio_dev *indio_dev)
}
ade7759_reset(dev);
msleep(ADE7759_STARTUP_DELAY);
usleep_range(ADE7759_STARTUP_DELAY, ADE7759_STARTUP_DELAY + 100);
err_ret:
return ret;

2
drivers/staging/iio/meter/ade7759.h
View File

@ -30,7 +30,7 @@
#define ADE7759_MAX_TX 6
#define ADE7759_MAX_RX 6
#define ADE7759_STARTUP_DELAY 1
#define ADE7759_STARTUP_DELAY 1000
#define ADE7759_SPI_SLOW (u32)(300 * 1000)
#define ADE7759_SPI_BURST (u32)(1000 * 1000)

2
drivers/staging/iio/meter/ade7854.c
View File

@ -444,7 +444,7 @@ static int ade7854_initial_setup(struct iio_dev *indio_dev)
}
ade7854_reset(dev);
msleep(ADE7854_STARTUP_DELAY);
usleep_range(ADE7854_STARTUP_DELAY, ADE7854_STARTUP_DELAY + 100);
err_ret:
return ret;

2
drivers/staging/iio/meter/ade7854.h
View File

@ -136,7 +136,7 @@
#define ADE7854_MAX_TX 7
#define ADE7854_MAX_RX 7
#define ADE7854_STARTUP_DELAY 1
#define ADE7854_STARTUP_DELAY 1000
#define ADE7854_SPI_SLOW (u32)(300 * 1000)
#define ADE7854_SPI_BURST (u32)(1000 * 1000)