MTD core:

* Handle possible -EPROBE_DEFER from parse_mtd_partitions()
 * Constify buf in mtd_write_user_prot_reg()
 * Constify name param in mtd_bdi_init
 * Fix fall-through warnings for Clang
 * Get rid of Big MTD Lock ouf of mtdchar
 * Drop mtd_mutex usage from mtdchar_open()
 * Don't lock when recursively deleting partitions
 * Use module_mtd_blktrans() to register driver when relevant
 * Parse MTD as NVMEM cells
 * New OTP (one-time-programmable) erase ioctl
 * Require write permissions for locking and badblock ioctls
 * physmap:
   - Fix error return code of physmap_flash_remove()
   - physmap-bt1-rom: Fix unintentional stack access
 * ofpart parser:
   - Support Linksys Northstar partitions
   - Make symbol 'bcm4908_partitions_quirks' static
   - Limit parsing of deprecated DT syntax
   - Support BCM4908 fixed partitions
 * Qcom parser:
   - Incompatible with spi-nor 4k sectors
   - Fix error condition
   - Extend Qcom SMEM parser to SPI flash
 
 CFI:
 * Disable broken buffered writes for CFI chips within ID 0x2201
 * Address a Coverity report for unused value
 
 SPI NOR core:
 * Add OTP support
 * Fix module unload while an op in progress
 * Add various cleanup patches
 * Add Michael and Pratyush as designated reviewers in MAINTAINERS
 
 SPI NOR controller drivers:
 * intel-spi:
   - Move platform data header to x86 subfolder
 
 NAND core:
 * Fix error handling in nand_prog_page_op() (x2)
 * Add a helper to retrieve the number of ECC bytes per step
 * Add a helper to retrieve the number of ECC steps
 * Let ECC engines advertize the exact number of steps
 * ECC Hamming:
   - Populate the public nsteps field
   - Use the public nsteps field
 * ECC BCH:
   - Populate the public nsteps field
   - Use the public nsteps field
 
 Raw NAND core:
 * Add support for secure regions in NAND memory
 * Try not to use the ECC private structures
 * Remove duplicate include in rawnand.h
 * BBT:
   - Skip bad blocks when searching for the BBT in NAND (APPLIED THEN REVERTED)
 
 Raw NAND controller drivers:
 * Qcom:
   - Convert bindings to YAML
   - Use dma_mapping_error() for error check
   - Add missing nand_cleanup() in error path
   - Return actual error code instead of -ENODEV
   - Update last code word register
   - Add helper to configure location register
   - Rename parameter name in macro
   - Add helper to check last code word
   - Convert nandc to chip in Read/Write helper
   - Update register macro name for 0x2c offset
 * GPMI:
   - Fix a double free in gpmi_nand_init
 * Rockchip:
   - Use flexible-array member instead of zero-length array
 * Atmel:
   - Update ecc_stats.corrected counter
 * MXC:
   - Remove unneeded of_match_ptr()
 * R852:
   - replace spin_lock_irqsave by spin_lock in hard IRQ
 * Brcmnand:
   - Move to polling in pio mode on oops write
   - Read/write oob during EDU transfer
   - Fix OOB R/W with Hamming ECC
 * FSMC:
   - Fix error code in fsmc_nand_probe()
 * OMAP:
   - Use ECC information from the generic structures
 
 SPI-NAND core:
 * Add missing MODULE_DEVICE_TABLE()
 
 SPI-NAND drivers:
 * gigadevice: Support GD5F1GQ5UExxG
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmCBq3UACgkQJWrqGEe9
 VoS9Xwf+I9W5WZS+WLYdlJ9RvuPDYVyZolZdsxIOOaOGuMAYSLJI/GjWJyHAFdwJ
 qIPvr6qFnmKfUUaFZkln5Qk4QSfx+/t7+yj57e3lM9bSBEfTNToMI4AU8X6UAxa5
 NHnsU8O8sohnk2UrP1qRtk3IezJ0FdzHbQAc82GQ1QY+IE0NwHg0ETjgESR5iEfq
 PSnXb5Dgd637ENUlLsauSLbqFcD8sULvA3fJngxkQbBXDfv3KNZQhNsqw/l7NMY5
 rROk8/jv7kgnYs8ObdkWO9SZ9QIiFSLk3vgbrTTNl8ozYpIMVbsrLmsnh7G34RNO
 oWmbyOQdMDugaPYLJ9aTQmyI1qbKsA==
 =zJPs
 -----END PGP SIGNATURE-----

Merge tag 'mtd/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull mtd updates from Miquel Raynal:
 "MTD core:
   - Handle possible -EPROBE_DEFER from parse_mtd_partitions()
   - Constify buf in mtd_write_user_prot_reg()
   - Constify name param in mtd_bdi_init
   - Fix fall-through warnings for Clang
   - Get rid of Big MTD Lock ouf of mtdchar
   - Drop mtd_mutex usage from mtdchar_open()
   - Don't lock when recursively deleting partitions
   - Use module_mtd_blktrans() to register driver when relevant
   - Parse MTD as NVMEM cells
   - New OTP (one-time-programmable) erase ioctl
   - Require write permissions for locking and badblock ioctls
   - physmap:
      - Fix error return code of physmap_flash_remove()
      - physmap-bt1-rom: Fix unintentional stack access
   - ofpart parser:
      - Support Linksys Northstar partitions
      - Make symbol 'bcm4908_partitions_quirks' static
      - Limit parsing of deprecated DT syntax
      - Support BCM4908 fixed partitions
   - Qcom parser:
      - Incompatible with spi-nor 4k sectors
      - Fix error condition
      - Extend Qcom SMEM parser to SPI flash

  CFI:
   - Disable broken buffered writes for CFI chips within ID 0x2201
   - Address a Coverity report for unused value

  SPI NOR core:
   - Add OTP support
   - Fix module unload while an op in progress
   - Add various cleanup patches
   - Add Michael and Pratyush as designated reviewers in MAINTAINERS

  SPI NOR controller drivers:
   - intel-spi:
      - Move platform data header to x86 subfolder

  NAND core:
   - Fix error handling in nand_prog_page_op() (x2)
   - Add a helper to retrieve the number of ECC bytes per step
   - Add a helper to retrieve the number of ECC steps
   - Let ECC engines advertize the exact number of steps
   - ECC Hamming:
      - Populate the public nsteps field
      - Use the public nsteps field
   - ECC BCH:
      - Populate the public nsteps field
      - Use the public nsteps field

  Raw NAND core:
   - Add support for secure regions in NAND memory
   - Try not to use the ECC private structures
   - Remove duplicate include in rawnand.h
   - BBT:
      - Skip bad blocks when searching for the BBT in NAND (APPLIED THEN REVERTED)

  Raw NAND controller drivers:
   - Qcom:
      - Convert bindings to YAML
      - Use dma_mapping_error() for error check
      - Add missing nand_cleanup() in error path
      - Return actual error code instead of -ENODEV
      - Update last code word register
      - Add helper to configure location register
      - Rename parameter name in macro
      - Add helper to check last code word
      - Convert nandc to chip in Read/Write helper
      - Update register macro name for 0x2c offset
   - GPMI:
      - Fix a double free in gpmi_nand_init
   - Rockchip:
      - Use flexible-array member instead of zero-length array
   - Atmel:
      - Update ecc_stats.corrected counter
   - MXC:
      - Remove unneeded of_match_ptr()
   - R852:
      - replace spin_lock_irqsave by spin_lock in hard IRQ
   - Brcmnand:
      - Move to polling in pio mode on oops write
      - Read/write oob during EDU transfer
      - Fix OOB R/W with Hamming ECC
   - FSMC:
      - Fix error code in fsmc_nand_probe()
   - OMAP:
      - Use ECC information from the generic structures

  SPI-NAND core:
   - Add missing MODULE_DEVICE_TABLE()

  SPI-NAND drivers:
   - gigadevice: Support GD5F1GQ5UExxG"

* tag 'mtd/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (89 commits)
  Revert "mtd: rawnand: bbt: Skip bad blocks when searching for the BBT in NAND"
  mtd: core: Constify buf in mtd_write_user_prot_reg()
  Revert "mtd: spi-nor: macronix: Add support for mx25l51245g"
  mtd: spi-nor: core: Fix an issue of releasing resources during read/write
  mtd: cfi_cmdset_0002: remove redundant assignment to variable timeo
  mtd: cfi_cmdset_0002: Disable buffered writes for AMD chip 0x2201
  mtd: rawnand: qcom: Use dma_mapping_error() for error check
  mtd: rawnand: gpmi: Fix a double free in gpmi_nand_init
  mtd: rawnand: qcom: Add missing nand_cleanup() in error path
  mtd: rawnand: Add support for secure regions in NAND memory
  dt-bindings: mtd: Add a property to declare secure regions in NAND chips
  dt-bindings: mtd: Convert Qcom NANDc binding to YAML
  mtd: spi-nor: winbond: add OTP support to w25q32fw/jw
  mtd: spi-nor: implement OTP support for Winbond and similar flashes
  mtd: spi-nor: add OTP support
  mtd: spi-nor: swp: Improve code around spi_nor_check_lock_status_sr()
  mtd: spi-nor: Move Software Write Protection logic out of the core
  mtd: rawnand: bbt: Skip bad blocks when searching for the BBT in NAND
  include: linux: mtd: Remove duplicate include of nand.h
  mtd: parsers: ofpart: support Linksys Northstar partitions
  ...

Documentation/devicetree/bindings/mtd/nand-controller.yaml

@@ -143,6 +143,13 @@ patternProperties:
           Ready/Busy pins. Active state refers to the NAND ready state and
           should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted.
 
+      secure-regions:
+        $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        description:
+          Regions in the NAND chip which are protected using a secure element
+          like Trustzone. This property contains the start address and size of
+          the secure regions present.
+
     required:
       - reg
 

Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml

@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/linksys,ns-partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linksys Northstar partitioning
+
+description: |
+  Linksys devices based on Broadcom Northstar architecture often use two
+  firmware partitions. One is used for regular booting, the other is treated as
+  fallback.
+
+  This binding allows defining all fixed partitions and marking those containing
+  firmware. System can use that information e.g. for booting or flashing
+  purposes.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    const: linksys,ns-partitions
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+patternProperties:
+  "^partition@[0-9a-f]+$":
+    $ref: "partition.yaml#"
+    properties:
+      compatible:
+        items:
+          - const: linksys,ns-firmware
+          - const: brcm,trx
+    unevaluatedProperties: false
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "linksys,ns-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            label = "boot";
+            reg = <0x0 0x100000>;
+            read-only;
+        };
+
+        partition@100000 {
+            label = "nvram";
+            reg = <0x100000 0x100000>;
+        };
+
+        partition@200000 {
+            compatible = "linksys,ns-firmware", "brcm,trx";
+            reg = <0x200000 0xf00000>;
+        };
+
+        partition@1100000 {
+            compatible = "linksys,ns-firmware", "brcm,trx";
+            reg = <0x1100000 0xf00000>;
+        };
+    };

Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml

@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/nvmem-cells.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nvmem cells
+
+description: |
+  Any partition containing the compatible "nvmem-cells" will register as a
+  nvmem provider.
+  Each direct subnodes represents a nvmem cell following the nvmem binding.
+  Nvmem binding to declare nvmem-cells can be found in:
+  Documentation/devicetree/bindings/nvmem/nvmem.yaml
+
+maintainers:
+  - Ansuel Smith <ansuelsmth@gmail.com>
+
+allOf:
+  - $ref: /schemas/nvmem/nvmem.yaml#
+
+properties:
+  compatible:
+    const: nvmem-cells
+
+required:
+  - compatible
+
+additionalProperties: true
+
+examples:
+  - |
+    partitions {
+      compatible = "fixed-partitions";
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      /* ... */
+
+      };
+      art: art@1200000 {
+        compatible = "nvmem-cells";
+        reg = <0x1200000 0x0140000>;
+        label = "art";
+        read-only;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        macaddr_gmac1: macaddr_gmac1@0 {
+          reg = <0x0 0x6>;
+        };
+
+        macaddr_gmac2: macaddr_gmac2@6 {
+          reg = <0x6 0x6>;
+        };
+
+        pre_cal_24g: pre_cal_24g@1000 {
+          reg = <0x1000 0x2f20>;
+        };
+
+        pre_cal_5g: pre_cal_5g@5000{
+          reg = <0x5000 0x2f20>;
+        };
+      };
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            label = "bootloader";
+            reg = <0x000000 0x100000>;
+            read-only;
+        };
+
+        firmware@100000 {
+            compatible = "brcm,trx";
+            label = "firmware";
+            reg = <0x100000 0xe00000>;
+        };
+
+        calibration@f00000 {
+            compatible = "nvmem-cells";
+            label = "calibration";
+            reg = <0xf00000 0x100000>;
+            ranges = <0 0xf00000 0x100000>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            wifi0@0 {
+                reg = <0x000000 0x080000>;
+            };
+
+            wifi1@80000 {
+                reg = <0x080000 0x080000>;
+            };
+        };
+    };

Documentation/devicetree/bindings/mtd/qcom,nandc.yaml

@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/qcom,nandc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm NAND controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq806x-nand
+      - qcom,ipq4019-nand
+      - qcom,ipq6018-nand
+      - qcom,ipq8074-nand
+      - qcom,sdx55-nand
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Core Clock
+      - description: Always ON Clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: aon
+
+  "#address-cells": true
+  "#size-cells": true
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    type: object
+    properties:
+      nand-bus-width:
+        const: 8
+
+      nand-ecc-strength:
+        enum: [1, 4, 8]
+
+      nand-ecc-step-size:
+        enum:
+          - 512
+
+allOf:
+  - $ref: "nand-controller.yaml#"
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,ipq806x-nand
+    then:
+      properties:
+        dmas:
+          items:
+            - description: rxtx DMA channel
+
+        dma-names:
+          items:
+            - const: rxtx
+
+        qcom,cmd-crci:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description:
+            Must contain the ADM command type CRCI block instance number
+            specified for the NAND controller on the given platform
+
+        qcom,data-crci:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description:
+            Must contain the ADM data type CRCI block instance number
+            specified for the NAND controller on the given platform
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq4019-nand
+              - qcom,ipq6018-nand
+              - qcom,ipq8074-nand
+              - qcom,sdx55-nand
+
+    then:
+      properties:
+        dmas:
+          items:
+            - description: tx DMA channel
+            - description: rx DMA channel
+            - description: cmd DMA channel
+
+        dma-names:
+          items:
+            - const: tx
+            - const: rx
+            - const: cmd
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+    nand-controller@1ac00000 {
+      compatible = "qcom,ipq806x-nand";
+      reg = <0x1ac00000 0x800>;
+
+      clocks = <&gcc EBI2_CLK>,
+               <&gcc EBI2_AON_CLK>;
+      clock-names = "core", "aon";
+
+      dmas = <&adm_dma 3>;
+      dma-names = "rxtx";
+      qcom,cmd-crci = <15>;
+      qcom,data-crci = <3>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      nand@0 {
+        reg = <0>;
+
+        nand-ecc-strength = <4>;
+        nand-bus-width = <8>;
+
+        partitions {
+          compatible = "fixed-partitions";
+          #address-cells = <1>;
+          #size-cells = <1>;
+
+          partition@0 {
+            label = "boot-nand";
+            reg = <0 0x58a0000>;
+          };
+
+          partition@58a0000 {
+            label = "fs-nand";
+            reg = <0x58a0000 0x4000000>;
+          };
+        };
+      };
+    };
+
+    #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
+    nand-controller@79b0000 {
+      compatible = "qcom,ipq4019-nand";
+      reg = <0x79b0000 0x1000>;
+
+      clocks = <&gcc GCC_QPIC_CLK>,
+               <&gcc GCC_QPIC_AHB_CLK>;
+      clock-names = "core", "aon";
+
+      dmas = <&qpicbam 0>,
+             <&qpicbam 1>,
+             <&qpicbam 2>;
+      dma-names = "tx", "rx", "cmd";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      nand@0 {
+        reg = <0>;
+        nand-ecc-strength = <4>;
+        nand-bus-width = <8>;
+
+        partitions {
+          compatible = "fixed-partitions";
+          #address-cells = <1>;
+          #size-cells = <1>;
+
+          partition@0 {
+            label = "boot-nand";
+            reg = <0 0x58a0000>;
+          };
+
+          partition@58a0000 {
+            label = "fs-nand";
+            reg = <0x58a0000 0x4000000>;
+          };
+        };
+      };
+    };
+
+...

Documentation/devicetree/bindings/mtd/qcom_nandc.txt

@@ -1,142 +0,0 @@
-* Qualcomm NAND controller
-
-Required properties:
-- compatible:		must be one of the following:
-    * "qcom,ipq806x-nand" - for EBI2 NAND controller being used in IPQ806x
-			    SoC and it uses ADM DMA
-    * "qcom,ipq4019-nand" - for QPIC NAND controller v1.4.0 being used in
-                            IPQ4019 SoC and it uses BAM DMA
-    * "qcom,ipq6018-nand" - for QPIC NAND controller v1.5.0 being used in
-                            IPQ6018 SoC and it uses BAM DMA
-    * "qcom,ipq8074-nand" - for QPIC NAND controller v1.5.0 being used in
-                            IPQ8074 SoC and it uses BAM DMA
-    * "qcom,sdx55-nand"   - for QPIC NAND controller v2.0.0 being used in
-                            SDX55 SoC and it uses BAM DMA
-
-- reg:			MMIO address range
-- clocks:		must contain core clock and always on clock
-- clock-names:		must contain "core" for the core clock and "aon" for the
-			always on clock
-
-EBI2 specific properties:
-- dmas:			DMA specifier, consisting of a phandle to the ADM DMA
-			controller node and the channel number to be used for
-			NAND. Refer to dma.txt and qcom_adm.txt for more details
-- dma-names:		must be "rxtx"
-- qcom,cmd-crci:	must contain the ADM command type CRCI block instance
-			number specified for the NAND controller on the given
-			platform
-- qcom,data-crci:	must contain the ADM data type CRCI block instance
-			number specified for the NAND controller on the given
-			platform
-
-QPIC specific properties:
-- dmas:			DMA specifier, consisting of a phandle to the BAM DMA
-			and the channel number to be used for NAND. Refer to
-			dma.txt, qcom_bam_dma.txt for more details
-- dma-names:		must contain all 3 channel names : "tx", "rx", "cmd"
-- #address-cells:	<1> - subnodes give the chip-select number
-- #size-cells:		<0>
-
-* NAND chip-select
-
-Each controller may contain one or more subnodes to represent enabled
-chip-selects which (may) contain NAND flash chips. Their properties are as
-follows.
-
-Required properties:
-- reg:			a single integer representing the chip-select
-			number (e.g., 0, 1, 2, etc.)
-- #address-cells:	see partition.txt
-- #size-cells:		see partition.txt
-
-Optional properties:
-- nand-bus-width:	see nand-controller.yaml
-- nand-ecc-strength:	see nand-controller.yaml. If not specified, then ECC strength will
-			be used according to chip requirement and available
-			OOB size.
-
-Each nandcs device node may optionally contain a 'partitions' sub-node, which
-further contains sub-nodes describing the flash partition mapping. See
-partition.txt for more detail.
-
-Example:
-
-nand-controller@1ac00000 {
-	compatible = "qcom,ipq806x-nand";
-	reg = <0x1ac00000 0x800>;
-
-	clocks = <&gcc EBI2_CLK>,
-		 <&gcc EBI2_AON_CLK>;
-	clock-names = "core", "aon";
-
-	dmas = <&adm_dma 3>;
-	dma-names = "rxtx";
-	qcom,cmd-crci = <15>;
-	qcom,data-crci = <3>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	nand@0 {
-		reg = <0>;
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "boot-nand";
-				reg = <0 0x58a0000>;
-			};
-
-			partition@58a0000 {
-				label = "fs-nand";
-				reg = <0x58a0000 0x4000000>;
-			};
-		};
-	};
-};
-
-nand-controller@79b0000 {
-	compatible = "qcom,ipq4019-nand";
-	reg = <0x79b0000 0x1000>;
-
-	clocks = <&gcc GCC_QPIC_CLK>,
-		<&gcc GCC_QPIC_AHB_CLK>;
-	clock-names = "core", "aon";
-
-	dmas = <&qpicbam 0>,
-		<&qpicbam 1>,
-		<&qpicbam 2>;
-	dma-names = "tx", "rx", "cmd";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	nand@0 {
-		reg = <0>;
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "boot-nand";
-				reg = <0 0x58a0000>;
-			};
-
-			partition@58a0000 {
-				label = "fs-nand";
-				reg = <0x58a0000 0x4000000>;
-			};
-		};
-	};
-};

Documentation/devicetree/bindings/nvmem/nvmem.yaml

@@ -20,9 +20,6 @@ description: |
   storage device.
 
 properties:
-  $nodename:
-    pattern: "^(eeprom|efuse|nvram)(@.*|-[0-9a-f])*$"
-
   "#address-cells":
     const: 1
 

MAINTAINERS

@@ -17005,6 +17005,8 @@ F:	arch/arm/mach-spear/
 
 SPI NOR SUBSYSTEM
 M:	Tudor Ambarus <tudor.ambarus@microchip.com>
+R:	Michael Walle <michael@walle.cc>
+R:	Pratyush Yadav <p.yadav@ti.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
 W:	http://www.linux-mtd.infradead.org/

drivers/mtd/chips/cfi_cmdset_0001.c

@@ -72,7 +72,8 @@ static int cfi_intelext_is_locked(struct mtd_info *mtd, loff_t ofs,
 #ifdef CONFIG_MTD_OTP
 static int cfi_intelext_read_fact_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int cfi_intelext_read_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
-static int cfi_intelext_write_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+static int cfi_intelext_write_user_prot_reg(struct mtd_info *, loff_t, size_t,
+					    size_t *, const u_char *);
 static int cfi_intelext_lock_user_prot_reg (struct mtd_info *, loff_t, size_t);
 static int cfi_intelext_get_fact_prot_info(struct mtd_info *, size_t,
 					   size_t *, struct otp_info *);
@@ -2447,10 +2448,10 @@ static int cfi_intelext_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
 
 static int cfi_intelext_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
 					    size_t len, size_t *retlen,
-					     u_char *buf)
+					    const u_char *buf)
 {
 	return cfi_intelext_otp_walk(mtd, from, len, retlen,
-				     buf, do_otp_write, 1);
+				     (u_char *)buf, do_otp_write, 1);
 }
 
 static int cfi_intelext_lock_user_prot_reg(struct mtd_info *mtd,
@@ -2549,6 +2550,7 @@ static int cfi_intelext_suspend(struct mtd_info *mtd)
 			   anyway? The latter for now. */
 			printk(KERN_NOTICE "Flash device refused suspend due to active operation (state %d)\n", chip->state);
 			ret = -EAGAIN;
+			break;
 		case FL_PM_SUSPENDED:
 			break;
 		}

drivers/mtd/chips/cfi_cmdset_0002.c

@@ -80,7 +80,7 @@ static int cfi_amdstd_read_fact_prot_reg(struct mtd_info *, loff_t, size_t,
 static int cfi_amdstd_read_user_prot_reg(struct mtd_info *, loff_t, size_t,
 					 size_t *, u_char *);
 static int cfi_amdstd_write_user_prot_reg(struct mtd_info *, loff_t, size_t,
-					  size_t *, u_char *);
+					  size_t *, const u_char *);
 static int cfi_amdstd_lock_user_prot_reg(struct mtd_info *, loff_t, size_t);
 
 static int cfi_amdstd_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
@@ -272,6 +272,10 @@ static void fixup_use_write_buffers(struct mtd_info *mtd)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
+
+	if (cfi->mfr == CFI_MFR_AMD && cfi->id == 0x2201)
+		return;
+
 	if (cfi->cfiq->BufWriteTimeoutTyp) {
 		pr_debug("Using buffer write method\n");
 		mtd->_write = cfi_amdstd_write_buffers;
@@ -902,6 +906,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 			/* Someone else might have been playing with it. */
 			goto retry;
 		}
+		return 0;
 
 	case FL_READY:
 	case FL_CFI_QUERY:
@@ -1630,9 +1635,9 @@ static int cfi_amdstd_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
 
 static int cfi_amdstd_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
 					  size_t len, size_t *retlen,
-					  u_char *buf)
+					  const u_char *buf)
 {
-	return cfi_amdstd_otp_walk(mtd, from, len, retlen, buf,
+	return cfi_amdstd_otp_walk(mtd, from, len, retlen, (u_char *)buf,
 				   do_otp_write, 1);
 }
 
@@ -1649,7 +1654,7 @@ static int __xipram do_write_oneword_once(struct map_info *map,
 					  unsigned long adr, map_word datum,
 					  int mode, struct cfi_private *cfi)
 {
-	unsigned long timeo = jiffies + HZ;
+	unsigned long timeo;
 	/*
 	 * We use a 1ms + 1 jiffies generic timeout for writes (most devices
 	 * have a max write time of a few hundreds usec). However, we should
@@ -2994,6 +2999,7 @@ static int cfi_amdstd_suspend(struct mtd_info *mtd)
 			 * as the whole point is that nobody can do anything
 			 * with the chip now anyway.
 			 */
+			break;
 		case FL_PM_SUSPENDED:
 			break;
 

drivers/mtd/chips/cfi_cmdset_0020.c

@@ -1332,6 +1332,8 @@ static int cfi_staa_suspend(struct mtd_info *mtd)
 			 * as the whole point is that nobody can do anything
 			 * with the chip now anyway.
 			 */
+			break;
+
 		case FL_PM_SUSPENDED:
 			break;
 

drivers/mtd/devices/mtd_dataflash.c

@@ -527,7 +527,7 @@ static int dataflash_read_user_otp(struct mtd_info *mtd,
 }
 
 static int dataflash_write_user_otp(struct mtd_info *mtd,
-		loff_t from, size_t len, size_t *retlen, u_char *buf)
+		loff_t from, size_t len, size_t *retlen, const u_char *buf)
 {
 	struct spi_message	m;
 	const size_t		l = 4 + 64;

drivers/mtd/ftl.c

@@ -1056,19 +1056,7 @@ static struct mtd_blktrans_ops ftl_tr = {
 	.owner		= THIS_MODULE,
 };
 
-static int __init init_ftl(void)
+module_mtd_blktrans(ftl_tr);
-{
-	return register_mtd_blktrans(&ftl_tr);
-}
-
-static void __exit cleanup_ftl(void)
-{
-	deregister_mtd_blktrans(&ftl_tr);
-}
-
-module_init(init_ftl);
-module_exit(cleanup_ftl);
-
 
 MODULE_LICENSE("Dual MPL/GPL");
 MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");

drivers/mtd/inftlcore.c

@@ -937,18 +937,7 @@ static struct mtd_blktrans_ops inftl_tr = {
 	.owner		= THIS_MODULE,
 };
 
-static int __init init_inftl(void)
+module_mtd_blktrans(inftl_tr);
-{
-	return register_mtd_blktrans(&inftl_tr);
-}
-
-static void __exit cleanup_inftl(void)
-{
-	deregister_mtd_blktrans(&inftl_tr);
-}
-
-module_init(init_inftl);
-module_exit(cleanup_inftl);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com>, David Woodhouse <dwmw2@infradead.org>, Fabrice Bellard <fabrice.bellard@netgem.com> et al.");

drivers/mtd/maps/physmap-bt1-rom.c

@@ -79,7 +79,7 @@ static void __xipram bt1_rom_map_copy_from(struct map_info *map,
 	if (shift) {
 		chunk = min_t(ssize_t, 4 - shift, len);
 		data = readl_relaxed(src - shift);
-		memcpy(to, &data + shift, chunk);
+		memcpy(to, (char *)&data + shift, chunk);
 		src += chunk;
 		to += chunk;
 		len -= chunk;

drivers/mtd/maps/physmap-core.c

@@ -69,8 +69,10 @@ static int physmap_flash_remove(struct platform_device *dev)
 	int i, err = 0;
 
 	info = platform_get_drvdata(dev);
-	if (!info)
+	if (!info) {
+		err = -EINVAL;
 		goto out;
+	}
 
 	if (info->cmtd) {
 		err = mtd_device_unregister(info->cmtd);

drivers/mtd/mtdblock.c

@@ -346,19 +346,7 @@ static struct mtd_blktrans_ops mtdblock_tr = {
 	.owner		= THIS_MODULE,
 };
 
-static int __init init_mtdblock(void)
+module_mtd_blktrans(mtdblock_tr);
-{
-	return register_mtd_blktrans(&mtdblock_tr);
-}
-
-static void __exit cleanup_mtdblock(void)
-{
-	deregister_mtd_blktrans(&mtdblock_tr);
-}
-
-module_init(init_mtdblock);
-module_exit(cleanup_mtdblock);
-
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Nicolas Pitre <nico@fluxnic.net> et al.");

drivers/mtd/mtdblock_ro.c

@@ -67,18 +67,7 @@ static struct mtd_blktrans_ops mtdblock_tr = {
 	.owner		= THIS_MODULE,
 };
 
-static int __init mtdblock_init(void)
+module_mtd_blktrans(mtdblock_tr);
-{
-	return register_mtd_blktrans(&mtdblock_tr);
-}
-
-static void __exit mtdblock_exit(void)
-{
-	deregister_mtd_blktrans(&mtdblock_tr);
-}
-
-module_init(mtdblock_init);
-module_exit(mtdblock_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");

drivers/mtd/mtdchar.c

@@ -27,8 +27,6 @@
 
 #include "mtdcore.h"
 
-static DEFINE_MUTEX(mtd_mutex);
-
 /*
  * Data structure to hold the pointer to the mtd device as well
  * as mode information of various use cases.
@@ -58,13 +56,10 @@ static int mtdchar_open(struct inode *inode, struct file *file)
 	if ((file->f_mode & FMODE_WRITE) && (minor & 1))
 		return -EACCES;
 
-	mutex_lock(&mtd_mutex);
 	mtd = get_mtd_device(NULL, devnum);
 
-	if (IS_ERR(mtd)) {
+	if (IS_ERR(mtd))
-		ret = PTR_ERR(mtd);
+		return PTR_ERR(mtd);
-		goto out;
-	}
 
 	if (mtd->type == MTD_ABSENT) {
 		ret = -ENODEV;
@@ -84,13 +79,10 @@ static int mtdchar_open(struct inode *inode, struct file *file)
 	}
 	mfi->mtd = mtd;
 	file->private_data = mfi;
-	mutex_unlock(&mtd_mutex);
 	return 0;
 
 out1:
 	put_mtd_device(mtd);
-out:
-	mutex_unlock(&mtd_mutex);
 	return ret;
 } /* mtdchar_open */
 
@@ -651,16 +643,12 @@ static int mtdchar_ioctl(struct file *file, u_int cmd, u_long arg)
 	case MEMGETINFO:
 	case MEMREADOOB:
 	case MEMREADOOB64:
-	case MEMLOCK:
-	case MEMUNLOCK:
 	case MEMISLOCKED:
 	case MEMGETOOBSEL:
 	case MEMGETBADBLOCK:
-	case MEMSETBADBLOCK:
 	case OTPSELECT:
 	case OTPGETREGIONCOUNT:
 	case OTPGETREGIONINFO:
-	case OTPLOCK:
 	case ECCGETLAYOUT:
 	case ECCGETSTATS:
 	case MTDFILEMODE:
@@ -671,9 +659,14 @@ static int mtdchar_ioctl(struct file *file, u_int cmd, u_long arg)
 	/* "dangerous" commands */
 	case MEMERASE:
 	case MEMERASE64:
+	case MEMLOCK:
+	case MEMUNLOCK:
+	case MEMSETBADBLOCK:
 	case MEMWRITEOOB:
 	case MEMWRITEOOB64:
 	case MEMWRITE:
+	case OTPLOCK:
+	case OTPERASE:
 		if (!(file->f_mode & FMODE_WRITE))
 			return -EPERM;
 		break;
@@ -938,6 +931,7 @@ static int mtdchar_ioctl(struct file *file, u_int cmd, u_long arg)
 	}
 
 	case OTPLOCK:
+	case OTPERASE:
 	{
 		struct otp_info oinfo;
 
@@ -945,7 +939,10 @@ static int mtdchar_ioctl(struct file *file, u_int cmd, u_long arg)
 			return -EINVAL;
 		if (copy_from_user(&oinfo, argp, sizeof(oinfo)))
 			return -EFAULT;
-		ret = mtd_lock_user_prot_reg(mtd, oinfo.start, oinfo.length);
+		if (cmd == OTPLOCK)
+			ret = mtd_lock_user_prot_reg(mtd, oinfo.start, oinfo.length);
+		else
+			ret = mtd_erase_user_prot_reg(mtd, oinfo.start, oinfo.length);
 		break;
 	}
 
@@ -991,6 +988,7 @@ static int mtdchar_ioctl(struct file *file, u_int cmd, u_long arg)
 			if (!mtd_has_oob(mtd))
 				return -EOPNOTSUPP;
 			mfi->mode = arg;
+			break;
 
 		case MTD_FILE_MODE_NORMAL:
 			break;
@@ -1026,11 +1024,14 @@ static int mtdchar_ioctl(struct file *file, u_int cmd, u_long arg)
 
 static long mtdchar_unlocked_ioctl(struct file *file, u_int cmd, u_long arg)
 {
+	struct mtd_file_info *mfi = file->private_data;
+	struct mtd_info *mtd = mfi->mtd;
+	struct mtd_info *master = mtd_get_master(mtd);
 	int ret;
 
-	mutex_lock(&mtd_mutex);
+	mutex_lock(&master->master.chrdev_lock);
 	ret = mtdchar_ioctl(file, cmd, arg);
-	mutex_unlock(&mtd_mutex);
+	mutex_unlock(&master->master.chrdev_lock);
 
 	return ret;
 }
@@ -1051,10 +1052,11 @@ static long mtdchar_compat_ioctl(struct file *file, unsigned int cmd,
 {
 	struct mtd_file_info *mfi = file->private_data;
 	struct mtd_info *mtd = mfi->mtd;
+	struct mtd_info *master = mtd_get_master(mtd);
 	void __user *argp = compat_ptr(arg);
 	int ret = 0;
 
-	mutex_lock(&mtd_mutex);
+	mutex_lock(&master->master.chrdev_lock);
 
 	switch (cmd) {
 	case MEMWRITEOOB32:
@@ -1117,7 +1119,7 @@ static long mtdchar_compat_ioctl(struct file *file, unsigned int cmd,
 		ret = mtdchar_ioctl(file, cmd, (unsigned long)argp);
 	}
 
-	mutex_unlock(&mtd_mutex);
+	mutex_unlock(&master->master.chrdev_lock);
 
 	return ret;
 }

drivers/mtd/mtdcore.c

@@ -531,6 +531,7 @@ static int mtd_nvmem_reg_read(void *priv, unsigned int offset,
 
 static int mtd_nvmem_add(struct mtd_info *mtd)
 {
+	struct device_node *node = mtd_get_of_node(mtd);
 	struct nvmem_config config = {};
 
 	config.id = -1;
@@ -543,7 +544,7 @@ static int mtd_nvmem_add(struct mtd_info *mtd)
 	config.stride = 1;
 	config.read_only = true;
 	config.root_only = true;
-	config.no_of_node = true;
+	config.no_of_node = !of_device_is_compatible(node, "nvmem-cells");
 	config.priv = mtd;
 
 	mtd->nvmem = nvmem_register(&config);
@@ -773,6 +774,7 @@ static void mtd_set_dev_defaults(struct mtd_info *mtd)
 
 	INIT_LIST_HEAD(&mtd->partitions);
 	mutex_init(&mtd->master.partitions_lock);
+	mutex_init(&mtd->master.chrdev_lock);
 }
 
 /**
@@ -820,6 +822,9 @@ int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types,
 
 	/* Prefer parsed partitions over driver-provided fallback */
 	ret = parse_mtd_partitions(mtd, types, parser_data);
+	if (ret == -EPROBE_DEFER)
+		goto out;
+
 	if (ret > 0)
 		ret = 0;
 	else if (nr_parts)
@@ -1884,7 +1889,7 @@ int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
 EXPORT_SYMBOL_GPL(mtd_read_user_prot_reg);
 
 int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
-			    size_t *retlen, u_char *buf)
+			    size_t *retlen, const u_char *buf)
 {
 	struct mtd_info *master = mtd_get_master(mtd);
 	int ret;
@@ -1918,6 +1923,18 @@ int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len)
 }
 EXPORT_SYMBOL_GPL(mtd_lock_user_prot_reg);
 
+int mtd_erase_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len)
+{
+	struct mtd_info *master = mtd_get_master(mtd);
+
+	if (!master->_erase_user_prot_reg)
+		return -EOPNOTSUPP;
+	if (!len)
+		return 0;
+	return master->_erase_user_prot_reg(master, from, len);
+}
+EXPORT_SYMBOL_GPL(mtd_erase_user_prot_reg);
+
 /* Chip-supported device locking */
 int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 {
@@ -2172,7 +2189,7 @@ static int mtd_proc_show(struct seq_file *m, void *v)
 /*====================================================================*/
 /* Init code */
 
-static struct backing_dev_info * __init mtd_bdi_init(char *name)
+static struct backing_dev_info * __init mtd_bdi_init(const char *name)
 {
 	struct backing_dev_info *bdi;
 	int ret;

drivers/mtd/mtdpart.c

@@ -331,7 +331,7 @@ static int __del_mtd_partitions(struct mtd_info *mtd)
 
 	list_for_each_entry_safe(child, next, &mtd->partitions, part.node) {
 		if (mtd_has_partitions(child))
-			del_mtd_partitions(child);
+			__del_mtd_partitions(child);
 
 		pr_info("Deleting %s MTD partition\n", child->name);
 		ret = del_mtd_device(child);

drivers/mtd/mtdswap.c

@@ -1484,19 +1484,7 @@ static struct mtd_blktrans_ops mtdswap_ops = {
 	.owner		= THIS_MODULE,
 };
 
-static int __init mtdswap_modinit(void)
+module_mtd_blktrans(mtdswap_ops);
-{
-	return register_mtd_blktrans(&mtdswap_ops);
-}
-
-static void __exit mtdswap_modexit(void)
-{
-	deregister_mtd_blktrans(&mtdswap_ops);
-}
-
-module_init(mtdswap_modinit);
-module_exit(mtdswap_modexit);
-
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Jarkko Lavinen <jarkko.lavinen@nokia.com>");

drivers/mtd/nand/ecc-sw-bch.c

@@ -236,7 +236,6 @@ int nand_ecc_sw_bch_init_ctx(struct nand_device *nand)
 		goto free_engine_conf;
 
 	engine_conf->code_size = code_size;
-	engine_conf->nsteps = nsteps;
 	engine_conf->calc_buf = kzalloc(mtd->oobsize, GFP_KERNEL);
 	engine_conf->code_buf = kzalloc(mtd->oobsize, GFP_KERNEL);
 	if (!engine_conf->calc_buf || !engine_conf->code_buf) {
@@ -245,6 +244,7 @@ int nand_ecc_sw_bch_init_ctx(struct nand_device *nand)
 	}
 
 	nand->ecc.ctx.priv = engine_conf;
+	nand->ecc.ctx.nsteps = nsteps;
 	nand->ecc.ctx.total = nsteps * code_size;
 
 	ret = nand_ecc_sw_bch_init(nand);
@@ -253,7 +253,7 @@ int nand_ecc_sw_bch_init_ctx(struct nand_device *nand)
 
 	/* Verify the layout validity */
 	if (mtd_ooblayout_count_eccbytes(mtd) !=
-	    engine_conf->nsteps * engine_conf->code_size) {
+	    nand->ecc.ctx.nsteps * engine_conf->code_size) {
 		pr_err("Invalid ECC layout\n");
 		ret = -EINVAL;
 		goto cleanup_bch_ctx;
@@ -295,7 +295,7 @@ static int nand_ecc_sw_bch_prepare_io_req(struct nand_device *nand,
 	struct mtd_info *mtd = nanddev_to_mtd(nand);
 	int eccsize = nand->ecc.ctx.conf.step_size;
 	int eccbytes = engine_conf->code_size;
-	int eccsteps = engine_conf->nsteps;
+	int eccsteps = nand->ecc.ctx.nsteps;
 	int total = nand->ecc.ctx.total;
 	u8 *ecccalc = engine_conf->calc_buf;
 	const u8 *data;
@@ -333,7 +333,7 @@ static int nand_ecc_sw_bch_finish_io_req(struct nand_device *nand,
 	int eccsize = nand->ecc.ctx.conf.step_size;
 	int total = nand->ecc.ctx.total;
 	int eccbytes = engine_conf->code_size;
-	int eccsteps = engine_conf->nsteps;
+	int eccsteps = nand->ecc.ctx.nsteps;
 	u8 *ecccalc = engine_conf->calc_buf;
 	u8 *ecccode = engine_conf->code_buf;
 	unsigned int max_bitflips = 0;
@@ -365,7 +365,7 @@ static int nand_ecc_sw_bch_finish_io_req(struct nand_device *nand,
 		nand_ecc_sw_bch_calculate(nand, data, &ecccalc[i]);
 
 	/* Finish a page read: compare and correct */
-	for (eccsteps = engine_conf->nsteps, i = 0, data = req->databuf.in;
+	for (eccsteps = nand->ecc.ctx.nsteps, i = 0, data = req->databuf.in;
 	     eccsteps;
 	     eccsteps--, i += eccbytes, data += eccsize) {
 		int stat =  nand_ecc_sw_bch_correct(nand, data,

drivers/mtd/nand/ecc-sw-hamming.c

@@ -504,7 +504,6 @@ int nand_ecc_sw_hamming_init_ctx(struct nand_device *nand)
 		goto free_engine_conf;
 
 	engine_conf->code_size = 3;
-	engine_conf->nsteps = mtd->writesize / conf->step_size;
 	engine_conf->calc_buf = kzalloc(mtd->oobsize, GFP_KERNEL);
 	engine_conf->code_buf = kzalloc(mtd->oobsize, GFP_KERNEL);
 	if (!engine_conf->calc_buf || !engine_conf->code_buf) {
@@ -513,7 +512,8 @@ int nand_ecc_sw_hamming_init_ctx(struct nand_device *nand)
 	}
 
 	nand->ecc.ctx.priv = engine_conf;
-	nand->ecc.ctx.total = engine_conf->nsteps * engine_conf->code_size;
+	nand->ecc.ctx.nsteps = mtd->writesize / conf->step_size;
+	nand->ecc.ctx.total = nand->ecc.ctx.nsteps * engine_conf->code_size;
 
 	return 0;
 
@@ -548,7 +548,7 @@ static int nand_ecc_sw_hamming_prepare_io_req(struct nand_device *nand,
 	struct mtd_info *mtd = nanddev_to_mtd(nand);
 	int eccsize = nand->ecc.ctx.conf.step_size;
 	int eccbytes = engine_conf->code_size;
-	int eccsteps = engine_conf->nsteps;
+	int eccsteps = nand->ecc.ctx.nsteps;
 	int total = nand->ecc.ctx.total;
 	u8 *ecccalc = engine_conf->calc_buf;
 	const u8 *data;
@@ -586,7 +586,7 @@ static int nand_ecc_sw_hamming_finish_io_req(struct nand_device *nand,
 	int eccsize = nand->ecc.ctx.conf.step_size;
 	int total = nand->ecc.ctx.total;
 	int eccbytes = engine_conf->code_size;
-	int eccsteps = engine_conf->nsteps;
+	int eccsteps = nand->ecc.ctx.nsteps;
 	u8 *ecccalc = engine_conf->calc_buf;
 	u8 *ecccode = engine_conf->code_buf;
 	unsigned int max_bitflips = 0;
@@ -618,7 +618,7 @@ static int nand_ecc_sw_hamming_finish_io_req(struct nand_device *nand,
 		nand_ecc_sw_hamming_calculate(nand, data, &ecccalc[i]);
 
 	/* Finish a page read: compare and correct */
-	for (eccsteps = engine_conf->nsteps, i = 0, data = req->databuf.in;
+	for (eccsteps = nand->ecc.ctx.nsteps, i = 0, data = req->databuf.in;
 	     eccsteps;
 	     eccsteps--, i += eccbytes, data += eccsize) {
 		int stat =  nand_ecc_sw_hamming_correct(nand, data,

drivers/mtd/nand/onenand/onenand_base.c

@@ -3167,9 +3167,10 @@ static int onenand_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
  * Write user OTP area.
  */
 static int onenand_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
-			size_t len, size_t *retlen, u_char *buf)
+			size_t len, size_t *retlen, const u_char *buf)
 {
-	return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_write, MTD_OTP_USER);
+	return onenand_otp_walk(mtd, from, len, retlen, (u_char *)buf,
+				do_otp_write, MTD_OTP_USER);
 }
 
 /**

drivers/mtd/nand/onenand/onenand_samsung.c

@@ -396,6 +396,7 @@ static int s3c_onenand_command(struct mtd_info *mtd, int cmd, loff_t addr,
 	case ONENAND_CMD_READOOB:
 	case ONENAND_CMD_BUFFERRAM:
 		ONENAND_SET_NEXT_BUFFERRAM(this);
+		break;
 	default:
 		break;
 	}

drivers/mtd/nand/raw/atmel/nand-controller.c

@@ -883,10 +883,12 @@ static int atmel_nand_pmecc_correct_data(struct nand_chip *chip, void *buf,
 							  NULL, 0,
 							  chip->ecc.strength);
 
-		if (ret >= 0)
+		if (ret >= 0) {
+			mtd->ecc_stats.corrected += ret;
 			max_bitflips = max(ret, max_bitflips);
-		else
+		} else {
 			mtd->ecc_stats.failed++;
+		}
 
 		databuf += chip->ecc.size;
 		eccbuf += chip->ecc.bytes;

drivers/mtd/nand/raw/brcmnand/brcmnand.c

@@ -242,6 +242,9 @@ struct brcmnand_controller {
 	u32                     edu_ext_addr;
 	u32                     edu_cmd;
 	u32                     edu_config;
+	int			sas; /* spare area size, per flash cache */
+	int			sector_size_1k;
+	u8			*oob;
 
 	/* flash_dma reg */
 	const u16		*flash_dma_offsets;
@@ -249,7 +252,7 @@ struct brcmnand_controller {
 	dma_addr_t		dma_pa;
 
 	int (*dma_trans)(struct brcmnand_host *host, u64 addr, u32 *buf,
-			 u32 len, u8 dma_cmd);
+			 u8 *oob, u32 len, u8 dma_cmd);
 
 	/* in-memory cache of the FLASH_CACHE, used only for some commands */
 	u8			flash_cache[FC_BYTES];
@@ -1479,6 +1482,23 @@ static irqreturn_t brcmnand_edu_irq(int irq, void *data)
 		edu_writel(ctrl, EDU_EXT_ADDR, ctrl->edu_ext_addr);
 		edu_readl(ctrl, EDU_EXT_ADDR);
 
+		if (ctrl->oob) {
+			if (ctrl->edu_cmd == EDU_CMD_READ) {
+				ctrl->oob += read_oob_from_regs(ctrl,
+							ctrl->edu_count + 1,
+							ctrl->oob, ctrl->sas,
+							ctrl->sector_size_1k);
+			} else {
+				brcmnand_write_reg(ctrl, BRCMNAND_CMD_ADDRESS,
+						   ctrl->edu_ext_addr);
+				brcmnand_read_reg(ctrl, BRCMNAND_CMD_ADDRESS);
+				ctrl->oob += write_oob_to_regs(ctrl,
+							       ctrl->edu_count,
+							       ctrl->oob, ctrl->sas,
+							       ctrl->sector_size_1k);
+			}
+		}
+
 		mb(); /* flush previous writes */
 		edu_writel(ctrl, EDU_CMD, ctrl->edu_cmd);
 		edu_readl(ctrl, EDU_CMD);
@@ -1850,9 +1870,10 @@ static void brcmnand_write_buf(struct nand_chip *chip, const uint8_t *buf,
  *  Kick EDU engine
  */
 static int brcmnand_edu_trans(struct brcmnand_host *host, u64 addr, u32 *buf,
-			      u32 len, u8 cmd)
+			      u8 *oob, u32 len, u8 cmd)
 {
 	struct brcmnand_controller *ctrl = host->ctrl;
+	struct brcmnand_cfg *cfg = &host->hwcfg;
 	unsigned long timeo = msecs_to_jiffies(200);
 	int ret = 0;
 	int dir = (cmd == CMD_PAGE_READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
@@ -1860,6 +1881,9 @@ static int brcmnand_edu_trans(struct brcmnand_host *host, u64 addr, u32 *buf,
 	unsigned int trans = len >> FC_SHIFT;
 	dma_addr_t pa;
 
+	dev_dbg(ctrl->dev, "EDU %s %p:%p\n", ((edu_cmd == EDU_CMD_READ) ?
+					      "read" : "write"), buf, oob);
+
 	pa = dma_map_single(ctrl->dev, buf, len, dir);
 	if (dma_mapping_error(ctrl->dev, pa)) {
 		dev_err(ctrl->dev, "unable to map buffer for EDU DMA\n");
@@ -1871,6 +1895,8 @@ static int brcmnand_edu_trans(struct brcmnand_host *host, u64 addr, u32 *buf,
 	ctrl->edu_ext_addr = addr;
 	ctrl->edu_cmd = edu_cmd;
 	ctrl->edu_count = trans;
+	ctrl->sas = cfg->spare_area_size;
+	ctrl->oob = oob;
 
 	edu_writel(ctrl, EDU_DRAM_ADDR, (u32)ctrl->edu_dram_addr);
 	edu_readl(ctrl,  EDU_DRAM_ADDR);
@@ -1879,6 +1905,16 @@ static int brcmnand_edu_trans(struct brcmnand_host *host, u64 addr, u32 *buf,
 	edu_writel(ctrl, EDU_LENGTH, FC_BYTES);
 	edu_readl(ctrl, EDU_LENGTH);
 
+	if (ctrl->oob && (ctrl->edu_cmd == EDU_CMD_WRITE)) {
+		brcmnand_write_reg(ctrl, BRCMNAND_CMD_ADDRESS,
+				   ctrl->edu_ext_addr);
+		brcmnand_read_reg(ctrl, BRCMNAND_CMD_ADDRESS);
+		ctrl->oob += write_oob_to_regs(ctrl,
+					       1,
+					       ctrl->oob, ctrl->sas,
+					       ctrl->sector_size_1k);
+	}
+
 	/* Start edu engine */
 	mb(); /* flush previous writes */
 	edu_writel(ctrl, EDU_CMD, ctrl->edu_cmd);
@@ -1893,6 +1929,14 @@ static int brcmnand_edu_trans(struct brcmnand_host *host, u64 addr, u32 *buf,
 
 	dma_unmap_single(ctrl->dev, pa, len, dir);
 
+	/* read last subpage oob */
+	if (ctrl->oob && (ctrl->edu_cmd == EDU_CMD_READ)) {
+		ctrl->oob += read_oob_from_regs(ctrl,
+						1,
+						ctrl->oob, ctrl->sas,
+						ctrl->sector_size_1k);
+	}
+
 	/* for program page check NAND status */
 	if (((brcmnand_read_reg(ctrl, BRCMNAND_INTFC_STATUS) &
 	      INTFC_FLASH_STATUS) & NAND_STATUS_FAIL) &&
@@ -2002,7 +2046,7 @@ static void brcmnand_dma_run(struct brcmnand_host *host, dma_addr_t desc)
 }
 
 static int brcmnand_dma_trans(struct brcmnand_host *host, u64 addr, u32 *buf,
-			      u32 len, u8 dma_cmd)
+			      u8 *oob, u32 len, u8 dma_cmd)
 {
 	struct brcmnand_controller *ctrl = host->ctrl;
 	dma_addr_t buf_pa;
@@ -2147,8 +2191,9 @@ static int brcmnand_read(struct mtd_info *mtd, struct nand_chip *chip,
 try_dmaread:
 	brcmnand_clear_ecc_addr(ctrl);
 
-	if (ctrl->dma_trans && !oob && flash_dma_buf_ok(buf)) {
+	if (ctrl->dma_trans && (has_edu(ctrl) || !oob) &&
-		err = ctrl->dma_trans(host, addr, buf,
+	    flash_dma_buf_ok(buf)) {
+		err = ctrl->dma_trans(host, addr, buf, oob,
 				      trans * FC_BYTES,
 				      CMD_PAGE_READ);
 
@@ -2296,8 +2341,12 @@ static int brcmnand_write(struct mtd_info *mtd, struct nand_chip *chip,
 	for (i = 0; i < ctrl->max_oob; i += 4)
 		oob_reg_write(ctrl, i, 0xffffffff);
 
-	if (use_dma(ctrl) && !oob && flash_dma_buf_ok(buf)) {
+	if (mtd->oops_panic_write)
-		if (ctrl->dma_trans(host, addr, (u32 *)buf, mtd->writesize,
+		/* switch to interrupt polling and PIO mode */
+		disable_ctrl_irqs(ctrl);
+
+	if (use_dma(ctrl) && (has_edu(ctrl) || !oob) && flash_dma_buf_ok(buf)) {
+		if (ctrl->dma_trans(host, addr, (u32 *)buf, oob, mtd->writesize,
 				    CMD_PROGRAM_PAGE))
 
 			ret = -EIO;
@@ -2688,6 +2737,12 @@ static int brcmnand_attach_chip(struct nand_chip *chip)
 
 	ret = brcmstb_choose_ecc_layout(host);
 
+	/* If OOB is written with ECC enabled it will cause ECC errors */
+	if (is_hamming_ecc(host->ctrl, &host->hwcfg)) {
+		chip->ecc.write_oob = brcmnand_write_oob_raw;
+		chip->ecc.read_oob = brcmnand_read_oob_raw;
+	}
+
 	return ret;
 }
 

drivers/mtd/nand/raw/fsmc_nand.c

@@ -930,6 +930,7 @@ static int fsmc_nand_attach_chip(struct nand_chip *nand)
 				 "Using 4-bit SW BCH ECC scheme\n");
 			break;
 		}
+		break;
 
 	case NAND_ECC_ENGINE_TYPE_ON_DIE:
 		break;
@@ -1077,11 +1078,13 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
 		host->read_dma_chan = dma_request_channel(mask, filter, NULL);
 		if (!host->read_dma_chan) {
 			dev_err(&pdev->dev, "Unable to get read dma channel\n");
+			ret = -ENODEV;
 			goto disable_clk;
 		}
 		host->write_dma_chan = dma_request_channel(mask, filter, NULL);
 		if (!host->write_dma_chan) {
 			dev_err(&pdev->dev, "Unable to get write dma channel\n");
+			ret = -ENODEV;
 			goto release_dma_read_chan;
 		}
 	}

drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c

@@ -2449,7 +2449,7 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
 	this->bch_geometry.auxiliary_size = 128;
 	ret = gpmi_alloc_dma_buffer(this);
 	if (ret)
-		goto err_out;
+		return ret;
 
 	nand_controller_init(&this->base);
 	this->base.ops = &gpmi_nand_controller_ops;

drivers/mtd/nand/raw/mxc_nand.c

@@ -1849,7 +1849,7 @@ static int mxcnd_remove(struct platform_device *pdev)
 static struct platform_driver mxcnd_driver = {
 	.driver = {
 		   .name = DRIVER_NAME,
-		   .of_match_table = of_match_ptr(mxcnd_dt_ids),
+		   .of_match_table = mxcnd_dt_ids,
 	},
 	.probe = mxcnd_probe,
 	.remove = mxcnd_remove,

drivers/mtd/nand/raw/nand_base.c

@@ -278,11 +278,48 @@ static int nand_block_bad(struct nand_chip *chip, loff_t ofs)
 	return 0;
 }
 
+/**
+ * nand_region_is_secured() - Check if the region is secured
+ * @chip: NAND chip object
+ * @offset: Offset of the region to check
+ * @size: Size of the region to check
+ *
+ * Checks if the region is secured by comparing the offset and size with the
+ * list of secure regions obtained from DT. Returns true if the region is
+ * secured else false.
+ */
+static bool nand_region_is_secured(struct nand_chip *chip, loff_t offset, u64 size)
+{
+	int i;
+
+	/* Skip touching the secure regions if present */
+	for (i = 0; i < chip->nr_secure_regions; i++) {
+		const struct nand_secure_region *region = &chip->secure_regions[i];
+
+		if (offset + size <= region->offset ||
+		    offset >= region->offset + region->size)
+			continue;
+
+		pr_debug("%s: Region 0x%llx - 0x%llx is secured!",
+			 __func__, offset, offset + size);
+
+		return true;
+	}
+
+	return false;
+}
+
 static int nand_isbad_bbm(struct nand_chip *chip, loff_t ofs)
 {
+	struct mtd_info *mtd = nand_to_mtd(chip);
+
 	if (chip->options & NAND_NO_BBM_QUIRK)
 		return 0;
 
+	/* Check if the region is secured */
+	if (nand_region_is_secured(chip, ofs, mtd->erasesize))
+		return -EIO;
+
 	if (chip->legacy.block_bad)
 		return chip->legacy.block_bad(chip, ofs);
 
@@ -397,6 +434,10 @@ static int nand_do_write_oob(struct nand_chip *chip, loff_t to,
 		return -EINVAL;
 	}
 
+	/* Check if the region is secured */
+	if (nand_region_is_secured(chip, to, ops->ooblen))
+		return -EIO;
+
 	chipnr = (int)(to >> chip->chip_shift);
 
 	/*
@@ -1294,8 +1335,6 @@ static int nand_exec_prog_page_op(struct nand_chip *chip, unsigned int page,
 	};
 	struct nand_operation op = NAND_OPERATION(chip->cur_cs, instrs);
 	int naddrs = nand_fill_column_cycles(chip, addrs, offset_in_page);
-	int ret;
-	u8 status;
 
 	if (naddrs < 0)
 		return naddrs;
@@ -1335,15 +1374,7 @@ static int nand_exec_prog_page_op(struct nand_chip *chip, unsigned int page,
 		op.ninstrs--;
 	}
 
-	ret = nand_exec_op(chip, &op);
+	return nand_exec_op(chip, &op);
-	if (!prog || ret)
-		return ret;
-
-	ret = nand_status_op(chip, &status);
-	if (ret)
-		return ret;
-
-	return status;
 }
 
 /**
@@ -1449,7 +1480,8 @@ int nand_prog_page_op(struct nand_chip *chip, unsigned int page,
 		      unsigned int len)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
-	int status;
+	u8 status;
+	int ret;
 
 	if (!len || !buf)
 		return -EINVAL;
@@ -1458,14 +1490,24 @@ int nand_prog_page_op(struct nand_chip *chip, unsigned int page,
 		return -EINVAL;
 
 	if (nand_has_exec_op(chip)) {
-		status = nand_exec_prog_page_op(chip, page, offset_in_page, buf,
+		ret = nand_exec_prog_page_op(chip, page, offset_in_page, buf,
 						len, true);
+		if (ret)
+			return ret;
+
+		ret = nand_status_op(chip, &status);
+		if (ret)
+			return ret;
 	} else {
 		chip->legacy.cmdfunc(chip, NAND_CMD_SEQIN, offset_in_page,
 				     page);
 		chip->legacy.write_buf(chip, buf, len);
 		chip->legacy.cmdfunc(chip, NAND_CMD_PAGEPROG, -1, -1);
-		status = chip->legacy.waitfunc(chip);
+		ret = chip->legacy.waitfunc(chip);
+		if (ret < 0)
+			return ret;
+
+		status = ret;
 	}
 
 	if (status & NAND_STATUS_FAIL)
@@ -3127,6 +3169,10 @@ static int nand_do_read_ops(struct nand_chip *chip, loff_t from,
 	int retry_mode = 0;
 	bool ecc_fail = false;
 
+	/* Check if the region is secured */
+	if (nand_region_is_secured(chip, from, readlen))
+		return -EIO;
+
 	chipnr = (int)(from >> chip->chip_shift);
 	nand_select_target(chip, chipnr);
 
@@ -3458,6 +3504,10 @@ static int nand_do_read_oob(struct nand_chip *chip, loff_t from,
 	pr_debug("%s: from = 0x%08Lx, len = %i\n",
 			__func__, (unsigned long long)from, readlen);
 
+	/* Check if the region is secured */
+	if (nand_region_is_secured(chip, from, readlen))
+		return -EIO;
+
 	stats = mtd->ecc_stats;
 
 	len = mtd_oobavail(mtd, ops);
@@ -3979,6 +4029,10 @@ static int nand_do_write_ops(struct nand_chip *chip, loff_t to,
 		return -EINVAL;
 	}
 
+	/* Check if the region is secured */
+	if (nand_region_is_secured(chip, to, writelen))
+		return -EIO;
+
 	column = to & (mtd->writesize - 1);
 
 	chipnr = (int)(to >> chip->chip_shift);
@@ -4180,6 +4234,10 @@ int nand_erase_nand(struct nand_chip *chip, struct erase_info *instr,
 	if (check_offs_len(chip, instr->addr, instr->len))
 		return -EINVAL;
 
+	/* Check if the region is secured */
+	if (nand_region_is_secured(chip, instr->addr, instr->len))
+		return -EIO;
+
 	/* Grab the lock and see if the device is available */
 	ret = nand_get_device(chip);
 	if (ret)
@@ -4995,6 +5053,31 @@ static bool of_get_nand_on_flash_bbt(struct device_node *np)
 	return of_property_read_bool(np, "nand-on-flash-bbt");
 }
 
+static int of_get_nand_secure_regions(struct nand_chip *chip)
+{
+	struct device_node *dn = nand_get_flash_node(chip);
+	int nr_elem, i, j;
+
+	nr_elem = of_property_count_elems_of_size(dn, "secure-regions", sizeof(u64));
+	if (!nr_elem)
+		return 0;
+
+	chip->nr_secure_regions = nr_elem / 2;
+	chip->secure_regions = kcalloc(chip->nr_secure_regions, sizeof(*chip->secure_regions),
+				       GFP_KERNEL);
+	if (!chip->secure_regions)
+		return -ENOMEM;
+
+	for (i = 0, j = 0; i < chip->nr_secure_regions; i++, j += 2) {
+		of_property_read_u64_index(dn, "secure-regions", j,
+					   &chip->secure_regions[i].offset);
+		of_property_read_u64_index(dn, "secure-regions", j + 1,
+					   &chip->secure_regions[i].size);
+	}
+
+	return 0;
+}
+
 static int rawnand_dt_init(struct nand_chip *chip)
 {
 	struct nand_device *nand = mtd_to_nanddev(nand_to_mtd(chip));
@@ -5162,8 +5245,8 @@ int rawnand_sw_hamming_init(struct nand_chip *chip)
 	chip->ecc.size = base->ecc.ctx.conf.step_size;
 	chip->ecc.strength = base->ecc.ctx.conf.strength;
 	chip->ecc.total = base->ecc.ctx.total;
-	chip->ecc.steps = engine_conf->nsteps;
+	chip->ecc.steps = nanddev_get_ecc_nsteps(base);
-	chip->ecc.bytes = engine_conf->code_size;
+	chip->ecc.bytes = base->ecc.ctx.total / nanddev_get_ecc_nsteps(base);
 
 	return 0;
 }
@@ -5201,7 +5284,7 @@ EXPORT_SYMBOL(rawnand_sw_hamming_cleanup);
 int rawnand_sw_bch_init(struct nand_chip *chip)
 {
 	struct nand_device *base = &chip->base;
-	struct nand_ecc_sw_bch_conf *engine_conf;
+	const struct nand_ecc_props *ecc_conf = nanddev_get_ecc_conf(base);
 	int ret;
 
 	base->ecc.user_conf.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
@@ -5213,13 +5296,11 @@ int rawnand_sw_bch_init(struct nand_chip *chip)
 	if (ret)
 		return ret;
 
-	engine_conf = base->ecc.ctx.priv;
+	chip->ecc.size = ecc_conf->step_size;
-
+	chip->ecc.strength = ecc_conf->strength;
-	chip->ecc.size = base->ecc.ctx.conf.step_size;
-	chip->ecc.strength = base->ecc.ctx.conf.strength;
 	chip->ecc.total = base->ecc.ctx.total;
-	chip->ecc.steps = engine_conf->nsteps;
+	chip->ecc.steps = nanddev_get_ecc_nsteps(base);
-	chip->ecc.bytes = engine_conf->code_size;
+	chip->ecc.bytes = base->ecc.ctx.total / nanddev_get_ecc_nsteps(base);
 
 	return 0;
 }
@@ -5953,6 +6034,16 @@ static int nand_scan_tail(struct nand_chip *chip)
 			goto err_free_interface_config;
 	}
 
+	/*
+	 * Look for secure regions in the NAND chip. These regions are supposed
+	 * to be protected by a secure element like Trustzone. So the read/write
+	 * accesses to these regions will be blocked in the runtime by this
+	 * driver.
+	 */
+	ret = of_get_nand_secure_regions(chip);
+	if (ret)
+		goto err_free_interface_config;
+
 	/* Check, if we should skip the bad block table scan */
 	if (chip->options & NAND_SKIP_BBTSCAN)
 		return 0;
@@ -5960,10 +6051,13 @@ static int nand_scan_tail(struct nand_chip *chip)
 	/* Build bad block table */
 	ret = nand_create_bbt(chip);
 	if (ret)
-		goto err_free_interface_config;
+		goto err_free_secure_regions;
 
 	return 0;
 
+err_free_secure_regions:
+	kfree(chip->secure_regions);
+
 err_free_interface_config:
 	kfree(chip->best_interface_config);
 
@@ -6051,6 +6145,9 @@ void nand_cleanup(struct nand_chip *chip)
 
 	nanddev_cleanup(&chip->base);
 
+	/* Free secure regions data */
+	kfree(chip->secure_regions);
+
 	/* Free bad block table memory */
 	kfree(chip->bbt);
 	kfree(chip->data_buf);

drivers/mtd/nand/raw/omap2.c

@@ -1868,18 +1868,19 @@ static int omap_sw_ooblayout_ecc(struct mtd_info *mtd, int section,
 				 struct mtd_oob_region *oobregion)
 {
 	struct nand_device *nand = mtd_to_nanddev(mtd);
-	const struct nand_ecc_sw_bch_conf *engine_conf = nand->ecc.ctx.priv;
+	unsigned int nsteps = nanddev_get_ecc_nsteps(nand);
+	unsigned int ecc_bytes = nanddev_get_ecc_bytes_per_step(nand);
 	int off = BADBLOCK_MARKER_LENGTH;
 
-	if (section >= engine_conf->nsteps)
+	if (section >= nsteps)
 		return -ERANGE;
 
 	/*
 	 * When SW correction is employed, one OMAP specific marker byte is
 	 * reserved after each ECC step.
 	 */
-	oobregion->offset = off + (section * (engine_conf->code_size + 1));
+	oobregion->offset = off + (section * (ecc_bytes + 1));
-	oobregion->length = engine_conf->code_size;
+	oobregion->length = ecc_bytes;
 
 	return 0;
 }
@@ -1888,7 +1889,8 @@ static int omap_sw_ooblayout_free(struct mtd_info *mtd, int section,
 				  struct mtd_oob_region *oobregion)
 {
 	struct nand_device *nand = mtd_to_nanddev(mtd);
-	const struct nand_ecc_sw_bch_conf *engine_conf = nand->ecc.ctx.priv;
+	unsigned int nsteps = nanddev_get_ecc_nsteps(nand);
+	unsigned int ecc_bytes = nanddev_get_ecc_bytes_per_step(nand);
 	int off = BADBLOCK_MARKER_LENGTH;
 
 	if (section)
@@ -1898,7 +1900,7 @@ static int omap_sw_ooblayout_free(struct mtd_info *mtd, int section,
 	 * When SW correction is employed, one OMAP specific marker byte is
 	 * reserved after each ECC step.
 	 */
-	off += ((engine_conf->code_size + 1) * engine_conf->nsteps);
+	off += ((ecc_bytes + 1) * nsteps);
 	if (off >= mtd->oobsize)
 		return -ERANGE;
 

drivers/mtd/nand/raw/qcom_nandc.c

@@ -27,7 +27,7 @@
 #define	NAND_DEV0_CFG0			0x20
 #define	NAND_DEV0_CFG1			0x24
 #define	NAND_DEV0_ECC_CFG		0x28
-#define	NAND_DEV1_ECC_CFG		0x2c
+#define	NAND_AUTO_STATUS_EN		0x2c
 #define	NAND_DEV1_CFG0			0x30
 #define	NAND_DEV1_CFG1			0x34
 #define	NAND_READ_ID			0x40
@@ -48,6 +48,10 @@
 #define	NAND_READ_LOCATION_1		0xf24
 #define	NAND_READ_LOCATION_2		0xf28
 #define	NAND_READ_LOCATION_3		0xf2c
+#define	NAND_READ_LOCATION_LAST_CW_0	0xf40
+#define	NAND_READ_LOCATION_LAST_CW_1	0xf44
+#define	NAND_READ_LOCATION_LAST_CW_2	0xf48
+#define	NAND_READ_LOCATION_LAST_CW_3	0xf4c
 
 /* dummy register offsets, used by write_reg_dma */
 #define	NAND_DEV_CMD1_RESTORE		0xdead
@@ -181,12 +185,17 @@
 #define	ECC_BCH_4BIT	BIT(2)
 #define	ECC_BCH_8BIT	BIT(3)
 
-#define nandc_set_read_loc(nandc, reg, offset, size, is_last)	\
+#define nandc_set_read_loc_first(chip, reg, cw_offset, read_size, is_last_read_loc)	\
-nandc_set_reg(nandc, NAND_READ_LOCATION_##reg,			\
+nandc_set_reg(chip, reg,			\
-	      ((offset) << READ_LOCATION_OFFSET) |		\
+	      ((cw_offset) << READ_LOCATION_OFFSET) |		\
-	      ((size) << READ_LOCATION_SIZE) |			\
+	      ((read_size) << READ_LOCATION_SIZE) |			\
-	      ((is_last) << READ_LOCATION_LAST))
+	      ((is_last_read_loc) << READ_LOCATION_LAST))
 
+#define nandc_set_read_loc_last(chip, reg, cw_offset, read_size, is_last_read_loc)	\
+nandc_set_reg(chip, reg,			\
+	      ((cw_offset) << READ_LOCATION_OFFSET) |		\
+	      ((read_size) << READ_LOCATION_SIZE) |			\
+	      ((is_last_read_loc) << READ_LOCATION_LAST))
 /*
  * Returns the actual register address for all NAND_DEV_ registers
  * (i.e. NAND_DEV_CMD0, NAND_DEV_CMD1, NAND_DEV_CMD2 and NAND_DEV_CMD_VLD)
@@ -316,6 +325,10 @@ struct nandc_regs {
 	__le32 read_location1;
 	__le32 read_location2;
 	__le32 read_location3;
+	__le32 read_location_last0;
+	__le32 read_location_last1;
+	__le32 read_location_last2;
+	__le32 read_location_last3;
 
 	__le32 erased_cw_detect_cfg_clr;
 	__le32 erased_cw_detect_cfg_set;
@@ -644,14 +657,23 @@ static __le32 *offset_to_nandc_reg(struct nandc_regs *regs, int offset)
 		return &regs->read_location2;
 	case NAND_READ_LOCATION_3:
 		return &regs->read_location3;
+	case NAND_READ_LOCATION_LAST_CW_0:
+		return &regs->read_location_last0;
+	case NAND_READ_LOCATION_LAST_CW_1:
+		return &regs->read_location_last1;
+	case NAND_READ_LOCATION_LAST_CW_2:
+		return &regs->read_location_last2;
+	case NAND_READ_LOCATION_LAST_CW_3:
+		return &regs->read_location_last3;
 	default:
 		return NULL;
 	}
 }
 
-static void nandc_set_reg(struct qcom_nand_controller *nandc, int offset,
+static void nandc_set_reg(struct nand_chip *chip, int offset,
 			  u32 val)
 {
+	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
 	struct nandc_regs *regs = nandc->regs;
 	__le32 *reg;
 
@@ -661,17 +683,43 @@ static void nandc_set_reg(struct qcom_nand_controller *nandc, int offset,
 		*reg = cpu_to_le32(val);
 }
 
+/* Helper to check the code word, whether it is last cw or not */
+static bool qcom_nandc_is_last_cw(struct nand_ecc_ctrl *ecc, int cw)
+{
+	return cw == (ecc->steps - 1);
+}
+
+/* helper to configure location register values */
+static void nandc_set_read_loc(struct nand_chip *chip, int cw, int reg,
+			       int cw_offset, int read_size, int is_last_read_loc)
+{
+	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+	int reg_base = NAND_READ_LOCATION_0;
+
+	if (nandc->props->qpic_v2 && qcom_nandc_is_last_cw(ecc, cw))
+		reg_base = NAND_READ_LOCATION_LAST_CW_0;
+
+	reg_base += reg * 4;
+
+	if (nandc->props->qpic_v2 && qcom_nandc_is_last_cw(ecc, cw))
+		return nandc_set_read_loc_last(chip, reg_base, cw_offset,
+				read_size, is_last_read_loc);
+	else
+		return nandc_set_read_loc_first(chip, reg_base, cw_offset,
+				read_size, is_last_read_loc);
+}
+
 /* helper to configure address register values */
 static void set_address(struct qcom_nand_host *host, u16 column, int page)
 {
 	struct nand_chip *chip = &host->chip;
-	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
 
 	if (chip->options & NAND_BUSWIDTH_16)
 		column >>= 1;
 
-	nandc_set_reg(nandc, NAND_ADDR0, page << 16 | column);
+	nandc_set_reg(chip, NAND_ADDR0, page << 16 | column);
-	nandc_set_reg(nandc, NAND_ADDR1, page >> 16 & 0xff);
+	nandc_set_reg(chip, NAND_ADDR1, page >> 16 & 0xff);
 }
 
 /*
@@ -680,11 +728,11 @@ static void set_address(struct qcom_nand_host *host, u16 column, int page)
  *
  * @num_cw:		number of steps for the read/write operation
  * @read:		read or write operation
+ * @cw	:		which code word
  */
-static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)
+static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read, int cw)
 {
 	struct nand_chip *chip = &host->chip;
-	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
 	u32 cmd, cfg0, cfg1, ecc_bch_cfg;
 
 	if (read) {
@@ -710,17 +758,17 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)
 		ecc_bch_cfg = 1 << ECC_CFG_ECC_DISABLE;
 	}
 
-	nandc_set_reg(nandc, NAND_FLASH_CMD, cmd);
+	nandc_set_reg(chip, NAND_FLASH_CMD, cmd);
-	nandc_set_reg(nandc, NAND_DEV0_CFG0, cfg0);
+	nandc_set_reg(chip, NAND_DEV0_CFG0, cfg0);
-	nandc_set_reg(nandc, NAND_DEV0_CFG1, cfg1);
+	nandc_set_reg(chip, NAND_DEV0_CFG1, cfg1);
-	nandc_set_reg(nandc, NAND_DEV0_ECC_CFG, ecc_bch_cfg);
+	nandc_set_reg(chip, NAND_DEV0_ECC_CFG, ecc_bch_cfg);
-	nandc_set_reg(nandc, NAND_EBI2_ECC_BUF_CFG, host->ecc_buf_cfg);
+	nandc_set_reg(chip, NAND_EBI2_ECC_BUF_CFG, host->ecc_buf_cfg);
-	nandc_set_reg(nandc, NAND_FLASH_STATUS, host->clrflashstatus);
+	nandc_set_reg(chip, NAND_FLASH_STATUS, host->clrflashstatus);
-	nandc_set_reg(nandc, NAND_READ_STATUS, host->clrreadstatus);
+	nandc_set_reg(chip, NAND_READ_STATUS, host->clrreadstatus);
-	nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
+	nandc_set_reg(chip, NAND_EXEC_CMD, 1);
 
 	if (read)
-		nandc_set_read_loc(nandc, 0, 0, host->use_ecc ?
+		nandc_set_read_loc(chip, cw, 0, 0, host->use_ecc ?
 				   host->cw_data : host->cw_size, 1);
 }
 
@@ -1079,8 +1127,10 @@ static int write_data_dma(struct qcom_nand_controller *nandc, int reg_off,
  * Helper to prepare DMA descriptors for configuring registers
  * before reading a NAND page.
  */
-static void config_nand_page_read(struct qcom_nand_controller *nandc)
+static void config_nand_page_read(struct nand_chip *chip)
 {
+	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+
 	write_reg_dma(nandc, NAND_ADDR0, 2, 0);
 	write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0);
 	write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, 0);
@@ -1094,11 +1144,18 @@ static void config_nand_page_read(struct qcom_nand_controller *nandc)
  * before reading each codeword in NAND page.
  */
 static void
-config_nand_cw_read(struct qcom_nand_controller *nandc, bool use_ecc)
+config_nand_cw_read(struct nand_chip *chip, bool use_ecc, int cw)
 {
+	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+	int reg = NAND_READ_LOCATION_0;
+
+	if (nandc->props->qpic_v2 && qcom_nandc_is_last_cw(ecc, cw))
+		reg = NAND_READ_LOCATION_LAST_CW_0;
+
 	if (nandc->props->is_bam)
-		write_reg_dma(nandc, NAND_READ_LOCATION_0, 4,
+		write_reg_dma(nandc, reg, 4, NAND_BAM_NEXT_SGL);
-			      NAND_BAM_NEXT_SGL);
 
 	write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
 	write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
@@ -1117,19 +1174,21 @@ config_nand_cw_read(struct qcom_nand_controller *nandc, bool use_ecc)
  * single codeword in page
  */
 static void
-config_nand_single_cw_page_read(struct qcom_nand_controller *nandc,
+config_nand_single_cw_page_read(struct nand_chip *chip,
-				bool use_ecc)
+				bool use_ecc, int cw)
 {
-	config_nand_page_read(nandc);
+	config_nand_page_read(chip);
-	config_nand_cw_read(nandc, use_ecc);
+	config_nand_cw_read(chip, use_ecc, cw);
 }
 
 /*
  * Helper to prepare DMA descriptors used to configure registers needed for
  * before writing a NAND page.
  */
-static void config_nand_page_write(struct qcom_nand_controller *nandc)
+static void config_nand_page_write(struct nand_chip *chip)
 {
+	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+
 	write_reg_dma(nandc, NAND_ADDR0, 2, 0);
 	write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0);
 	write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1,
@@ -1140,8 +1199,10 @@ static void config_nand_page_write(struct qcom_nand_controller *nandc)
  * Helper to prepare DMA descriptors for configuring registers
  * before writing each codeword in NAND page.
  */
-static void config_nand_cw_write(struct qcom_nand_controller *nandc)
+static void config_nand_cw_write(struct nand_chip *chip)
 {
+	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+
 	write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
 	write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
 
@@ -1168,44 +1229,44 @@ static int nandc_param(struct qcom_nand_host *host)
 	 * bytes to read onfi params
 	 */
 	if (nandc->props->qpic_v2)
-		nandc_set_reg(nandc, NAND_FLASH_CMD, OP_PAGE_READ_ONFI_READ |
+		nandc_set_reg(chip, NAND_FLASH_CMD, OP_PAGE_READ_ONFI_READ |
 			      PAGE_ACC | LAST_PAGE);
 	else
-		nandc_set_reg(nandc, NAND_FLASH_CMD, OP_PAGE_READ |
+		nandc_set_reg(chip, NAND_FLASH_CMD, OP_PAGE_READ |
 			      PAGE_ACC | LAST_PAGE);
 
-	nandc_set_reg(nandc, NAND_ADDR0, 0);
+	nandc_set_reg(chip, NAND_ADDR0, 0);
-	nandc_set_reg(nandc, NAND_ADDR1, 0);
+	nandc_set_reg(chip, NAND_ADDR1, 0);
-	nandc_set_reg(nandc, NAND_DEV0_CFG0, 0 << CW_PER_PAGE
+	nandc_set_reg(chip, NAND_DEV0_CFG0, 0 << CW_PER_PAGE
 					| 512 << UD_SIZE_BYTES
 					| 5 << NUM_ADDR_CYCLES
 					| 0 << SPARE_SIZE_BYTES);
-	nandc_set_reg(nandc, NAND_DEV0_CFG1, 7 << NAND_RECOVERY_CYCLES
+	nandc_set_reg(chip, NAND_DEV0_CFG1, 7 << NAND_RECOVERY_CYCLES
 					| 0 << CS_ACTIVE_BSY
 					| 17 << BAD_BLOCK_BYTE_NUM
 					| 1 << BAD_BLOCK_IN_SPARE_AREA
 					| 2 << WR_RD_BSY_GAP
 					| 0 << WIDE_FLASH
 					| 1 << DEV0_CFG1_ECC_DISABLE);
-	nandc_set_reg(nandc, NAND_EBI2_ECC_BUF_CFG, 1 << ECC_CFG_ECC_DISABLE);
+	nandc_set_reg(chip, NAND_EBI2_ECC_BUF_CFG, 1 << ECC_CFG_ECC_DISABLE);
 
 	/* configure CMD1 and VLD for ONFI param probing in QPIC v1 */
 	if (!nandc->props->qpic_v2) {
-		nandc_set_reg(nandc, NAND_DEV_CMD_VLD,
+		nandc_set_reg(chip, NAND_DEV_CMD_VLD,
 			      (nandc->vld & ~READ_START_VLD));
-		nandc_set_reg(nandc, NAND_DEV_CMD1,
+		nandc_set_reg(chip, NAND_DEV_CMD1,
 			      (nandc->cmd1 & ~(0xFF << READ_ADDR))
 			      | NAND_CMD_PARAM << READ_ADDR);
 	}
 
-	nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
+	nandc_set_reg(chip, NAND_EXEC_CMD, 1);
 
 	if (!nandc->props->qpic_v2) {
-		nandc_set_reg(nandc, NAND_DEV_CMD1_RESTORE, nandc->cmd1);
+		nandc_set_reg(chip, NAND_DEV_CMD1_RESTORE, nandc->cmd1);
-		nandc_set_reg(nandc, NAND_DEV_CMD_VLD_RESTORE, nandc->vld);
+		nandc_set_reg(chip, NAND_DEV_CMD_VLD_RESTORE, nandc->vld);
 	}
 
-	nandc_set_read_loc(nandc, 0, 0, 512, 1);
+	nandc_set_read_loc(chip, 0, 0, 0, 512, 1);
 
 	if (!nandc->props->qpic_v2) {
 		write_reg_dma(nandc, NAND_DEV_CMD_VLD, 1, 0);
@@ -1215,7 +1276,7 @@ static int nandc_param(struct qcom_nand_host *host)
 	nandc->buf_count = 512;
 	memset(nandc->data_buffer, 0xff, nandc->buf_count);
 
-	config_nand_single_cw_page_read(nandc, false);
+	config_nand_single_cw_page_read(chip, false, 0);
 
 	read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer,
 		      nandc->buf_count, 0);
@@ -1235,16 +1296,16 @@ static int erase_block(struct qcom_nand_host *host, int page_addr)
 	struct nand_chip *chip = &host->chip;
 	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
 
-	nandc_set_reg(nandc, NAND_FLASH_CMD,
+	nandc_set_reg(chip, NAND_FLASH_CMD,
 		      OP_BLOCK_ERASE | PAGE_ACC | LAST_PAGE);
-	nandc_set_reg(nandc, NAND_ADDR0, page_addr);
+	nandc_set_reg(chip, NAND_ADDR0, page_addr);
-	nandc_set_reg(nandc, NAND_ADDR1, 0);
+	nandc_set_reg(chip, NAND_ADDR1, 0);
-	nandc_set_reg(nandc, NAND_DEV0_CFG0,
+	nandc_set_reg(chip, NAND_DEV0_CFG0,
 		      host->cfg0_raw & ~(7 << CW_PER_PAGE));
-	nandc_set_reg(nandc, NAND_DEV0_CFG1, host->cfg1_raw);
+	nandc_set_reg(chip, NAND_DEV0_CFG1, host->cfg1_raw);
-	nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
+	nandc_set_reg(chip, NAND_EXEC_CMD, 1);
-	nandc_set_reg(nandc, NAND_FLASH_STATUS, host->clrflashstatus);
+	nandc_set_reg(chip, NAND_FLASH_STATUS, host->clrflashstatus);
-	nandc_set_reg(nandc, NAND_READ_STATUS, host->clrreadstatus);
+	nandc_set_reg(chip, NAND_READ_STATUS, host->clrreadstatus);
 
 	write_reg_dma(nandc, NAND_FLASH_CMD, 3, NAND_BAM_NEXT_SGL);
 	write_reg_dma(nandc, NAND_DEV0_CFG0, 2, NAND_BAM_NEXT_SGL);
@@ -1267,12 +1328,12 @@ static int read_id(struct qcom_nand_host *host, int column)
 	if (column == -1)
 		return 0;
 
-	nandc_set_reg(nandc, NAND_FLASH_CMD, OP_FETCH_ID);
+	nandc_set_reg(chip, NAND_FLASH_CMD, OP_FETCH_ID);
-	nandc_set_reg(nandc, NAND_ADDR0, column);
+	nandc_set_reg(chip, NAND_ADDR0, column);
-	nandc_set_reg(nandc, NAND_ADDR1, 0);
+	nandc_set_reg(chip, NAND_ADDR1, 0);
-	nandc_set_reg(nandc, NAND_FLASH_CHIP_SELECT,
+	nandc_set_reg(chip, NAND_FLASH_CHIP_SELECT,
 		      nandc->props->is_bam ? 0 : DM_EN);
-	nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
+	nandc_set_reg(chip, NAND_EXEC_CMD, 1);
 
 	write_reg_dma(nandc, NAND_FLASH_CMD, 4, NAND_BAM_NEXT_SGL);
 	write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
@@ -1288,8 +1349,8 @@ static int reset(struct qcom_nand_host *host)
 	struct nand_chip *chip = &host->chip;
 	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
 
-	nandc_set_reg(nandc, NAND_FLASH_CMD, OP_RESET_DEVICE);
+	nandc_set_reg(chip, NAND_FLASH_CMD, OP_RESET_DEVICE);
-	nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
+	nandc_set_reg(chip, NAND_EXEC_CMD, 1);
 
 	write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
 	write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
@@ -1492,7 +1553,7 @@ static void qcom_nandc_command(struct nand_chip *chip, unsigned int command,
 
 		host->use_ecc = true;
 		set_address(host, 0, page_addr);
-		update_rw_regs(host, ecc->steps, true);
+		update_rw_regs(host, ecc->steps, true, 0);
 		break;
 
 	case NAND_CMD_SEQIN:
@@ -1616,13 +1677,13 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
 
 	clear_bam_transaction(nandc);
 	set_address(host, host->cw_size * cw, page);
-	update_rw_regs(host, 1, true);
+	update_rw_regs(host, 1, true, cw);
-	config_nand_page_read(nandc);
+	config_nand_page_read(chip);
 
 	data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
 	oob_size1 = host->bbm_size;
 
-	if (cw == (ecc->steps - 1)) {
+	if (qcom_nandc_is_last_cw(ecc, cw)) {
 		data_size2 = ecc->size - data_size1 -
 			     ((ecc->steps - 1) * 4);
 		oob_size2 = (ecc->steps * 4) + host->ecc_bytes_hw +
@@ -1633,19 +1694,19 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
 	}
 
 	if (nandc->props->is_bam) {
-		nandc_set_read_loc(nandc, 0, read_loc, data_size1, 0);
+		nandc_set_read_loc(chip, cw, 0, read_loc, data_size1, 0);
 		read_loc += data_size1;
 
-		nandc_set_read_loc(nandc, 1, read_loc, oob_size1, 0);
+		nandc_set_read_loc(chip, cw, 1, read_loc, oob_size1, 0);
 		read_loc += oob_size1;
 
-		nandc_set_read_loc(nandc, 2, read_loc, data_size2, 0);
+		nandc_set_read_loc(chip, cw, 2, read_loc, data_size2, 0);
 		read_loc += data_size2;
 
-		nandc_set_read_loc(nandc, 3, read_loc, oob_size2, 1);
+		nandc_set_read_loc(chip, cw, 3, read_loc, oob_size2, 1);
 	}
 
-	config_nand_cw_read(nandc, false);
+	config_nand_cw_read(chip, false, cw);
 
 	read_data_dma(nandc, reg_off, data_buf, data_size1, 0);
 	reg_off += data_size1;
@@ -1703,7 +1764,7 @@ check_for_erased_page(struct qcom_nand_host *host, u8 *data_buf,
 	}
 
 	for_each_set_bit(cw, &uncorrectable_cws, ecc->steps) {
-		if (cw == (ecc->steps - 1)) {
+		if (qcom_nandc_is_last_cw(ecc, cw)) {
 			data_size = ecc->size - ((ecc->steps - 1) * 4);
 			oob_size = (ecc->steps * 4) + host->ecc_bytes_hw;
 		} else {
@@ -1763,7 +1824,7 @@ static int parse_read_errors(struct qcom_nand_host *host, u8 *data_buf,
 		u32 flash, buffer, erased_cw;
 		int data_len, oob_len;
 
-		if (i == (ecc->steps - 1)) {
+		if (qcom_nandc_is_last_cw(ecc, i)) {
 			data_len = ecc->size - ((ecc->steps - 1) << 2);
 			oob_len = ecc->steps << 2;
 		} else {
@@ -1856,13 +1917,13 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
 	u8 *data_buf_start = data_buf, *oob_buf_start = oob_buf;
 	int i, ret;
 
-	config_nand_page_read(nandc);
+	config_nand_page_read(chip);
 
 	/* queue cmd descs for each codeword */
 	for (i = 0; i < ecc->steps; i++) {
 		int data_size, oob_size;
 
-		if (i == (ecc->steps - 1)) {
+		if (qcom_nandc_is_last_cw(ecc, i)) {
 			data_size = ecc->size - ((ecc->steps - 1) << 2);
 			oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
 				   host->spare_bytes;
@@ -1873,18 +1934,18 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
 
 		if (nandc->props->is_bam) {
 			if (data_buf && oob_buf) {
-				nandc_set_read_loc(nandc, 0, 0, data_size, 0);
+				nandc_set_read_loc(chip, i, 0, 0, data_size, 0);
-				nandc_set_read_loc(nandc, 1, data_size,
+				nandc_set_read_loc(chip, i, 1, data_size,
 						   oob_size, 1);
 			} else if (data_buf) {
-				nandc_set_read_loc(nandc, 0, 0, data_size, 1);
+				nandc_set_read_loc(chip, i, 0, 0, data_size, 1);
 			} else {
-				nandc_set_read_loc(nandc, 0, data_size,
+				nandc_set_read_loc(chip, i, 0, data_size,
 						   oob_size, 1);
 			}
 		}
 
-		config_nand_cw_read(nandc, true);
+		config_nand_cw_read(chip, true, i);
 
 		if (data_buf)
 			read_data_dma(nandc, FLASH_BUF_ACC, data_buf,
@@ -1944,9 +2005,9 @@ static int copy_last_cw(struct qcom_nand_host *host, int page)
 	memset(nandc->data_buffer, 0xff, size);
 
 	set_address(host, host->cw_size * (ecc->steps - 1), page);
-	update_rw_regs(host, 1, true);
+	update_rw_regs(host, 1, true, ecc->steps - 1);
 
-	config_nand_single_cw_page_read(nandc, host->use_ecc);
+	config_nand_single_cw_page_read(chip, host->use_ecc, ecc->steps - 1);
 
 	read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size, 0);
 
@@ -2011,7 +2072,7 @@ static int qcom_nandc_read_oob(struct nand_chip *chip, int page)
 
 	host->use_ecc = true;
 	set_address(host, 0, page);
-	update_rw_regs(host, ecc->steps, true);
+	update_rw_regs(host, ecc->steps, true, 0);
 
 	return read_page_ecc(host, NULL, chip->oob_poi, page);
 }
@@ -2035,13 +2096,13 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const uint8_t *buf,
 	oob_buf = chip->oob_poi;
 
 	host->use_ecc = true;
-	update_rw_regs(host, ecc->steps, false);
+	update_rw_regs(host, ecc->steps, false, 0);
-	config_nand_page_write(nandc);
+	config_nand_page_write(chip);
 
 	for (i = 0; i < ecc->steps; i++) {
 		int data_size, oob_size;
 
-		if (i == (ecc->steps - 1)) {
+		if (qcom_nandc_is_last_cw(ecc, i)) {
 			data_size = ecc->size - ((ecc->steps - 1) << 2);
 			oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
 				   host->spare_bytes;
@@ -2061,14 +2122,14 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const uint8_t *buf,
 		 * itself. For the last codeword, we skip the bbm positions and
 		 * write to the free oob area.
 		 */
-		if (i == (ecc->steps - 1)) {
+		if (qcom_nandc_is_last_cw(ecc, i)) {
 			oob_buf += host->bbm_size;
 
 			write_data_dma(nandc, FLASH_BUF_ACC + data_size,
 				       oob_buf, oob_size, 0);
 		}
 
-		config_nand_cw_write(nandc);
+		config_nand_cw_write(chip);
 
 		data_buf += data_size;
 		oob_buf += oob_size;
@@ -2106,8 +2167,8 @@ static int qcom_nandc_write_page_raw(struct nand_chip *chip,
 	oob_buf = chip->oob_poi;
 
 	host->use_ecc = false;
-	update_rw_regs(host, ecc->steps, false);
+	update_rw_regs(host, ecc->steps, false, 0);
-	config_nand_page_write(nandc);
+	config_nand_page_write(chip);
 
 	for (i = 0; i < ecc->steps; i++) {
 		int data_size1, data_size2, oob_size1, oob_size2;
@@ -2116,7 +2177,7 @@ static int qcom_nandc_write_page_raw(struct nand_chip *chip,
 		data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
 		oob_size1 = host->bbm_size;
 
-		if (i == (ecc->steps - 1)) {
+		if (qcom_nandc_is_last_cw(ecc, i)) {
 			data_size2 = ecc->size - data_size1 -
 				     ((ecc->steps - 1) << 2);
 			oob_size2 = (ecc->steps << 2) + host->ecc_bytes_hw +
@@ -2144,7 +2205,7 @@ static int qcom_nandc_write_page_raw(struct nand_chip *chip,
 		write_data_dma(nandc, reg_off, oob_buf, oob_size2, 0);
 		oob_buf += oob_size2;
 
-		config_nand_cw_write(nandc);
+		config_nand_cw_write(chip);
 	}
 
 	ret = submit_descs(nandc);
@@ -2189,12 +2250,12 @@ static int qcom_nandc_write_oob(struct nand_chip *chip, int page)
 				    0, mtd->oobavail);
 
 	set_address(host, host->cw_size * (ecc->steps - 1), page);
-	update_rw_regs(host, 1, false);
+	update_rw_regs(host, 1, false, 0);
 
-	config_nand_page_write(nandc);
+	config_nand_page_write(chip);
 	write_data_dma(nandc, FLASH_BUF_ACC,
 		       nandc->data_buffer, data_size + oob_size, 0);
-	config_nand_cw_write(nandc);
+	config_nand_cw_write(chip);
 
 	ret = submit_descs(nandc);
 
@@ -2268,12 +2329,12 @@ static int qcom_nandc_block_markbad(struct nand_chip *chip, loff_t ofs)
 	/* prepare write */
 	host->use_ecc = false;
 	set_address(host, host->cw_size * (ecc->steps - 1), page);
-	update_rw_regs(host, 1, false);
+	update_rw_regs(host, 1, false, ecc->steps - 1);
 
-	config_nand_page_write(nandc);
+	config_nand_page_write(chip);
 	write_data_dma(nandc, FLASH_BUF_ACC,
 		       nandc->data_buffer, host->cw_size, 0);
-	config_nand_cw_write(nandc);
+	config_nand_cw_write(chip);
 
 	ret = submit_descs(nandc);
 
@@ -2882,6 +2943,7 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc,
 		if (!nandc->bam_txn) {
 			dev_err(nandc->dev,
 				"failed to allocate bam transaction\n");
+			nand_cleanup(chip);
 			return -ENOMEM;
 		}
 	}
@@ -2898,7 +2960,7 @@ static int qcom_probe_nand_devices(struct qcom_nand_controller *nandc)
 	struct device *dev = nandc->dev;
 	struct device_node *dn = dev->of_node, *child;
 	struct qcom_nand_host *host;
-	int ret;
+	int ret = -ENODEV;
 
 	for_each_available_child_of_node(dn, child) {
 		host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
@@ -2916,10 +2978,7 @@ static int qcom_probe_nand_devices(struct qcom_nand_controller *nandc)
 		list_add_tail(&host->node, &nandc->host_list);
 	}
 
-	if (list_empty(&nandc->host_list))
+	return ret;
-		return -ENODEV;
-
-	return 0;
 }
 
 /* parse custom DT properties here */
@@ -2992,7 +3051,7 @@ static int qcom_nandc_probe(struct platform_device *pdev)
 	nandc->base_dma = dma_map_resource(dev, res->start,
 					   resource_size(res),
 					   DMA_BIDIRECTIONAL, 0);
-	if (!nandc->base_dma)
+	if (dma_mapping_error(dev, nandc->base_dma))
 		return -ENXIO;
 
 	ret = qcom_nandc_alloc(nandc);

drivers/mtd/nand/raw/r852.c

@@ -724,10 +724,9 @@ static irqreturn_t r852_irq(int irq, void *data)
 	struct r852_device *dev = (struct r852_device *)data;
 
 	uint8_t card_status, dma_status;
-	unsigned long flags;
 	irqreturn_t ret = IRQ_NONE;
 
-	spin_lock_irqsave(&dev->irqlock, flags);
+	spin_lock(&dev->irqlock);
 
 	/* handle card detection interrupts first */
 	card_status = r852_read_reg(dev, R852_CARD_IRQ_STA);
@@ -813,7 +812,7 @@ static irqreturn_t r852_irq(int irq, void *data)
 		dbg("strange card status = %x", card_status);
 
 out:
-	spin_unlock_irqrestore(&dev->irqlock, flags);
+	spin_unlock(&dev->irqlock);
 	return ret;
 }
 

drivers/mtd/nand/raw/rockchip-nand-controller.c

@@ -159,7 +159,7 @@ struct rk_nfc_nand_chip {
 	u32 timing;
 
 	u8 nsels;
-	u8 sels[0];
+	u8 sels[];
 	/* Nothing after this field. */
 };
 

drivers/mtd/nand/raw/stm32_fmc2_nand.c

@@ -531,6 +531,7 @@ static int stm32_fmc2_nfc_ham_correct(struct nand_chip *chip, u8 *dat,
 		switch (b % 4) {
 		case 2:
 			bit_position += shifting;
+			break;
 		case 1:
 			break;
 		default:
@@ -546,6 +547,7 @@ static int stm32_fmc2_nfc_ham_correct(struct nand_chip *chip, u8 *dat,
 		switch (b % 4) {
 		case 2:
 			byte_addr += shifting;
+			break;
 		case 1:
 			break;
 		default:

drivers/mtd/nand/spi/core.c

@@ -1263,12 +1263,14 @@ static const struct spi_device_id spinand_ids[] = {
 	{ .name = "spi-nand" },
 	{ /* sentinel */ },
 };
+MODULE_DEVICE_TABLE(spi, spinand_ids);
 
 #ifdef CONFIG_OF
 static const struct of_device_id spinand_of_ids[] = {
 	{ .compatible = "spi-nand" },
 	{ /* sentinel */ },
 };
+MODULE_DEVICE_TABLE(of, spinand_of_ids);
 #endif
 
 static struct spi_mem_driver spinand_drv = {

drivers/mtd/nand/spi/gigadevice.c

@@ -13,7 +13,10 @@
 #define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS	(1 << 4)
 #define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS	(3 << 4)
 
-#define GD5FXGQ4UEXXG_REG_STATUS2		0xf0
+#define GD5FXGQ5XE_STATUS_ECC_1_4_BITFLIPS	(1 << 4)
+#define GD5FXGQ5XE_STATUS_ECC_4_BITFLIPS	(3 << 4)
+
+#define GD5FXGQXXEXXG_REG_STATUS2		0xf0
 
 #define GD5FXGQ4UXFXXG_STATUS_ECC_MASK		(7 << 4)
 #define GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS	(0 << 4)
@@ -102,7 +105,7 @@ static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
 	return -EINVAL;
 }
 
-static int gd5fxgq4_variant2_ooblayout_ecc(struct mtd_info *mtd, int section,
+static int gd5fxgqx_variant2_ooblayout_ecc(struct mtd_info *mtd, int section,
 				       struct mtd_oob_region *region)
 {
 	if (section)
@@ -114,7 +117,7 @@ static int gd5fxgq4_variant2_ooblayout_ecc(struct mtd_info *mtd, int section,
 	return 0;
 }
 
-static int gd5fxgq4_variant2_ooblayout_free(struct mtd_info *mtd, int section,
+static int gd5fxgqx_variant2_ooblayout_free(struct mtd_info *mtd, int section,
 					struct mtd_oob_region *region)
 {
 	if (section)
@@ -127,9 +130,10 @@ static int gd5fxgq4_variant2_ooblayout_free(struct mtd_info *mtd, int section,
 	return 0;
 }
 
-static const struct mtd_ooblayout_ops gd5fxgq4_variant2_ooblayout = {
+/* Valid for Q4/Q5 and Q6 (untested) devices */
-	.ecc = gd5fxgq4_variant2_ooblayout_ecc,
+static const struct mtd_ooblayout_ops gd5fxgqx_variant2_ooblayout = {
-	.free = gd5fxgq4_variant2_ooblayout_free,
+	.ecc = gd5fxgqx_variant2_ooblayout_ecc,
+	.free = gd5fxgqx_variant2_ooblayout_free,
 };
 
 static int gd5fxgq4xc_ooblayout_256_ecc(struct mtd_info *mtd, int section,
@@ -165,7 +169,7 @@ static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
 					u8 status)
 {
 	u8 status2;
-	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(GD5FXGQ4UEXXG_REG_STATUS2,
+	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(GD5FXGQXXEXXG_REG_STATUS2,
 						      &status2);
 	int ret;
 
@@ -203,6 +207,43 @@ static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
 	return -EINVAL;
 }
 
+static int gd5fxgq5xexxg_ecc_get_status(struct spinand_device *spinand,
+					u8 status)
+{
+	u8 status2;
+	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(GD5FXGQXXEXXG_REG_STATUS2,
+						      &status2);
+	int ret;
+
+	switch (status & STATUS_ECC_MASK) {
+	case STATUS_ECC_NO_BITFLIPS:
+		return 0;
+
+	case GD5FXGQ5XE_STATUS_ECC_1_4_BITFLIPS:
+		/*
+		 * Read status2 register to determine a more fine grained
+		 * bit error status
+		 */
+		ret = spi_mem_exec_op(spinand->spimem, &op);
+		if (ret)
+			return ret;
+
+		/*
+		 * 1 ... 4 bits are flipped (and corrected)
+		 */
+		/* bits sorted this way (1...0): ECCSE1, ECCSE0 */
+		return ((status2 & STATUS_ECC_MASK) >> 4) + 1;
+
+	case STATUS_ECC_UNCOR_ERROR:
+		return -EBADMSG;
+
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
 static int gd5fxgq4ufxxg_ecc_get_status(struct spinand_device *spinand,
 					u8 status)
 {
@@ -282,7 +323,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 					      &write_cache_variants,
 					      &update_cache_variants),
 		     SPINAND_HAS_QE_BIT,
-		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
 				     gd5fxgq4uexxg_ecc_get_status)),
 	SPINAND_INFO("GD5F1GQ4UFxxG",
 		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE, 0xb1, 0x48),
@@ -292,8 +333,18 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 					      &write_cache_variants,
 					      &update_cache_variants),
 		     SPINAND_HAS_QE_BIT,
-		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
 				     gd5fxgq4ufxxg_ecc_get_status)),
+	SPINAND_INFO("GD5F1GQ5UExxG",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x51),
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(4, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
+				     gd5fxgq5xexxg_ecc_get_status)),
 };
 
 static const struct spinand_manufacturer_ops gigadevice_spinand_manuf_ops = {

drivers/mtd/nftlcore.c

@@ -797,18 +797,7 @@ static struct mtd_blktrans_ops nftl_tr = {
 	.owner		= THIS_MODULE,
 };
 
-static int __init init_nftl(void)
+module_mtd_blktrans(nftl_tr);
-{
-	return register_mtd_blktrans(&nftl_tr);
-}
-
-static void __exit cleanup_nftl(void)
-{
-	deregister_mtd_blktrans(&nftl_tr);
-}
-
-module_init(init_nftl);
-module_exit(cleanup_nftl);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>, Fabrice Bellard <fabrice.bellard@netgem.com> et al.");

drivers/mtd/parsers/Kconfig

@@ -67,6 +67,25 @@ config MTD_OF_PARTS
 	  flash memory node, as described in
 	  Documentation/devicetree/bindings/mtd/partition.txt.
 
+config MTD_OF_PARTS_BCM4908
+	bool "BCM4908 partitioning support"
+	depends on MTD_OF_PARTS && (ARCH_BCM4908 || COMPILE_TEST)
+	default ARCH_BCM4908
+	help
+	  This provides partitions parser for BCM4908 family devices
+	  that can have multiple "firmware" partitions. It takes care of
+	  finding currently used one and backup ones.
+
+config MTD_OF_PARTS_LINKSYS_NS
+	bool "Linksys Northstar partitioning support"
+	depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCM4908 || COMPILE_TEST)
+	default ARCH_BCM_5301X
+	help
+	  This provides partitions parser for Linksys devices based on Broadcom
+	  Northstar architecture. Linksys commonly uses fixed flash layout with
+	  two "firmware" partitions. Currently used firmware has to be detected
+	  using CFE environment variable.
+
 config MTD_PARSER_IMAGETAG
 	tristate "Parser for BCM963XX Image Tag format partitions"
 	depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
@@ -162,9 +181,8 @@ config MTD_REDBOOT_PARTS_READONLY
 endif # MTD_REDBOOT_PARTS
 
 config MTD_QCOMSMEM_PARTS
-	tristate "Qualcomm SMEM NAND flash partition parser"
+	tristate "Qualcomm SMEM flash partition parser"
-	depends on MTD_NAND_QCOM || COMPILE_TEST
 	depends on QCOM_SMEM
 	help
 	  This provides support for parsing partitions from Shared Memory (SMEM)
-	  for NAND flash on Qualcomm platforms.
+	  for NAND and SPI flash on Qualcomm platforms.

drivers/mtd/parsers/Makefile

@@ -4,6 +4,9 @@ obj-$(CONFIG_MTD_BCM47XX_PARTS)		+= bcm47xxpart.o
 obj-$(CONFIG_MTD_BCM63XX_PARTS)		+= bcm63xxpart.o
 obj-$(CONFIG_MTD_CMDLINE_PARTS)		+= cmdlinepart.o
 obj-$(CONFIG_MTD_OF_PARTS)		+= ofpart.o
+ofpart-y				+= ofpart_core.o
+ofpart-$(CONFIG_MTD_OF_PARTS_BCM4908)	+= ofpart_bcm4908.o
+ofpart-$(CONFIG_MTD_OF_PARTS_LINKSYS_NS)+= ofpart_linksys_ns.o
 obj-$(CONFIG_MTD_PARSER_IMAGETAG)	+= parser_imagetag.o
 obj-$(CONFIG_MTD_AFS_PARTS)		+= afs.o
 obj-$(CONFIG_MTD_PARSER_TRX)		+= parser_trx.o

drivers/mtd/parsers/ofpart_bcm4908.c

@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/mtd/mtd.h>
+#include <linux/slab.h>
+#include <linux/mtd/partitions.h>
+
+#include "ofpart_bcm4908.h"
+
+#define BLPARAMS_FW_OFFSET		"NAND_RFS_OFS"
+
+static long long bcm4908_partitions_fw_offset(void)
+{
+	struct device_node *root;
+	struct property *prop;
+	const char *s;
+
+	root = of_find_node_by_path("/");
+	if (!root)
+		return -ENOENT;
+
+	of_property_for_each_string(root, "brcm_blparms", prop, s) {
+		size_t len = strlen(BLPARAMS_FW_OFFSET);
+		unsigned long offset;
+		int err;
+
+		if (strncmp(s, BLPARAMS_FW_OFFSET, len) || s[len] != '=')
+			continue;
+
+		err = kstrtoul(s + len + 1, 0, &offset);
+		if (err) {
+			pr_err("failed to parse %s\n", s + len + 1);
+			return err;
+		}
+
+		return offset << 10;
+	}
+
+	return -ENOENT;
+}
+
+int bcm4908_partitions_post_parse(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts)
+{
+	long long fw_offset;
+	int i;
+
+	fw_offset = bcm4908_partitions_fw_offset();
+
+	for (i = 0; i < nr_parts; i++) {
+		if (of_device_is_compatible(parts[i].of_node, "brcm,bcm4908-firmware")) {
+			if (fw_offset < 0 || parts[i].offset == fw_offset)
+				parts[i].name = "firmware";
+			else
+				parts[i].name = "backup";
+		}
+	}
+
+	return 0;
+}

drivers/mtd/parsers/ofpart_bcm4908.h

@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __BCM4908_PARTITIONS_H
+#define __BCM4908_PARTITIONS_H
+
+#ifdef CONFIG_MTD_OF_PARTS_BCM4908
+int bcm4908_partitions_post_parse(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts);
+#else
+static inline int bcm4908_partitions_post_parse(struct mtd_info *mtd, struct mtd_partition *parts,
+						int nr_parts)
+{
+	return -EOPNOTSUPP;
+}
+#endif
+
+#endif

drivers/mtd/parsers/ofpart_core.c

@@ -16,6 +16,23 @@
 #include <linux/slab.h>
 #include <linux/mtd/partitions.h>
 
+#include "ofpart_bcm4908.h"
+#include "ofpart_linksys_ns.h"
+
+struct fixed_partitions_quirks {
+	int (*post_parse)(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts);
+};
+
+static struct fixed_partitions_quirks bcm4908_partitions_quirks = {
+	.post_parse = bcm4908_partitions_post_parse,
+};
+
+static struct fixed_partitions_quirks linksys_ns_partitions_quirks = {
+	.post_parse = linksys_ns_partitions_post_parse,
+};
+
+static const struct of_device_id parse_ofpart_match_table[];
+
 static bool node_has_compatible(struct device_node *pp)
 {
 	return of_get_property(pp, "compatible", NULL);
@@ -25,6 +42,8 @@ static int parse_fixed_partitions(struct mtd_info *master,
 				  const struct mtd_partition **pparts,
 				  struct mtd_part_parser_data *data)
 {
+	const struct fixed_partitions_quirks *quirks;
+	const struct of_device_id *of_id;
 	struct mtd_partition *parts;
 	struct device_node *mtd_node;
 	struct device_node *ofpart_node;
@@ -33,14 +52,13 @@ static int parse_fixed_partitions(struct mtd_info *master,
 	int nr_parts, i, ret = 0;
 	bool dedicated = true;
 
-
 	/* Pull of_node from the master device node */
 	mtd_node = mtd_get_of_node(master);
 	if (!mtd_node)
 		return 0;
 
 	ofpart_node = of_get_child_by_name(mtd_node, "partitions");
-	if (!ofpart_node) {
+	if (!ofpart_node && !master->parent) {
 		/*
 		 * We might get here even when ofpart isn't used at all (e.g.,
 		 * when using another parser), so don't be louder than
@@ -50,11 +68,18 @@ static int parse_fixed_partitions(struct mtd_info *master,
 			 master->name, mtd_node);
 		ofpart_node = mtd_node;
 		dedicated = false;
-	} else if (!of_device_is_compatible(ofpart_node, "fixed-partitions")) {
+	}
+	if (!ofpart_node)
+		return 0;
+
+	of_id = of_match_node(parse_ofpart_match_table, ofpart_node);
+	if (dedicated && !of_id) {
 		/* The 'partitions' subnode might be used by another parser */
 		return 0;
 	}
 
+	quirks = of_id ? of_id->data : NULL;
+
 	/* First count the subnodes */
 	nr_parts = 0;
 	for_each_child_of_node(ofpart_node,  pp) {
@@ -126,6 +151,9 @@ static int parse_fixed_partitions(struct mtd_info *master,
 	if (!nr_parts)
 		goto ofpart_none;
 
+	if (quirks && quirks->post_parse)
+		quirks->post_parse(master, parts, nr_parts);
+
 	*pparts = parts;
 	return nr_parts;
 
@@ -140,7 +168,11 @@ ofpart_none:
 }
 
 static const struct of_device_id parse_ofpart_match_table[] = {
+	/* Generic */
 	{ .compatible = "fixed-partitions" },
+	/* Customized */
+	{ .compatible = "brcm,bcm4908-partitions", .data = &bcm4908_partitions_quirks, },
+	{ .compatible = "linksys,ns-partitions", .data = &linksys_ns_partitions_quirks, },
 	{},
 };
 MODULE_DEVICE_TABLE(of, parse_ofpart_match_table);

drivers/mtd/parsers/ofpart_linksys_ns.c

@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <linux/bcm47xx_nvram.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include "ofpart_linksys_ns.h"
+
+#define NVRAM_BOOT_PART		"bootpartition"
+
+static int ofpart_linksys_ns_bootpartition(void)
+{
+	char buf[4];
+	int bootpartition;
+
+	/* Check CFE environment variable */
+	if (bcm47xx_nvram_getenv(NVRAM_BOOT_PART, buf, sizeof(buf)) > 0) {
+		if (!kstrtoint(buf, 0, &bootpartition))
+			return bootpartition;
+		pr_warn("Failed to parse %s value \"%s\"\n", NVRAM_BOOT_PART,
+			buf);
+	} else {
+		pr_warn("Failed to get NVRAM \"%s\"\n", NVRAM_BOOT_PART);
+	}
+
+	return 0;
+}
+
+int linksys_ns_partitions_post_parse(struct mtd_info *mtd,
+				     struct mtd_partition *parts,
+				     int nr_parts)
+{
+	int bootpartition = ofpart_linksys_ns_bootpartition();
+	int trx_idx = 0;
+	int i;
+
+	for (i = 0; i < nr_parts; i++) {
+		if (of_device_is_compatible(parts[i].of_node, "linksys,ns-firmware")) {
+			if (trx_idx++ == bootpartition)
+				parts[i].name = "firmware";
+			else
+				parts[i].name = "backup";
+		}
+	}
+
+	return 0;
+}

drivers/mtd/parsers/ofpart_linksys_ns.h

@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __OFPART_LINKSYS_NS_H
+#define __OFPART_LINKSYS_NS_H
+
+#ifdef CONFIG_MTD_OF_PARTS_LINKSYS_NS
+int linksys_ns_partitions_post_parse(struct mtd_info *mtd,
+				     struct mtd_partition *parts,
+				     int nr_parts);
+#else
+static inline int linksys_ns_partitions_post_parse(struct mtd_info *mtd,
+						   struct mtd_partition *parts,
+						   int nr_parts)
+{
+	return -EOPNOTSUPP;
+}
+#endif
+
+#endif

drivers/mtd/parsers/qcomsmempart.c

@@ -65,6 +65,13 @@ static int parse_qcomsmem_part(struct mtd_info *mtd,
 	int ret, i, numparts;
 	char *name, *c;
 
+	if (IS_ENABLED(CONFIG_MTD_SPI_NOR_USE_4K_SECTORS)
+			&& mtd->type == MTD_NORFLASH) {
+		pr_err("%s: SMEM partition parser is incompatible with 4K sectors\n",
+				mtd->name);
+		return -EINVAL;
+	}
+
 	pr_debug("Parsing partition table info from SMEM\n");
 	ptable = qcom_smem_get(SMEM_APPS, SMEM_AARM_PARTITION_TABLE, &len);
 	if (IS_ERR(ptable)) {
@@ -104,7 +111,7 @@ static int parse_qcomsmem_part(struct mtd_info *mtd,
 	 * complete partition table
 	 */
 	ptable = qcom_smem_get(SMEM_APPS, SMEM_AARM_PARTITION_TABLE, &len);
-	if (IS_ERR_OR_NULL(ptable)) {
+	if (IS_ERR(ptable)) {
 		pr_err("Error reading partition table\n");
 		return PTR_ERR(ptable);
 	}

drivers/mtd/rfd_ftl.c

@@ -794,18 +794,7 @@ static struct mtd_blktrans_ops rfd_ftl_tr = {
 	.owner		= THIS_MODULE,
 };
 
-static int __init init_rfd_ftl(void)
+module_mtd_blktrans(rfd_ftl_tr);
-{
-	return register_mtd_blktrans(&rfd_ftl_tr);
-}
-
-static void __exit cleanup_rfd_ftl(void)
-{
-	deregister_mtd_blktrans(&rfd_ftl_tr);
-}
-
-module_init(init_rfd_ftl);
-module_exit(cleanup_rfd_ftl);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Sean Young <sean@mess.org>");

drivers/mtd/spi-nor/Makefile

@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 
-spi-nor-objs			:= core.o sfdp.o
+spi-nor-objs			:= core.o sfdp.o swp.o otp.o
 spi-nor-objs			+= atmel.o
 spi-nor-objs			+= catalyst.o
 spi-nor-objs			+= eon.o

drivers/mtd/spi-nor/controllers/intel-spi.c

@@ -15,7 +15,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/spi-nor.h>
-#include <linux/platform_data/intel-spi.h>
 
 #include "intel-spi.h"
 

drivers/mtd/spi-nor/controllers/intel-spi.h

@@ -9,7 +9,7 @@
 #ifndef INTEL_SPI_H
 #define INTEL_SPI_H
 
-#include <linux/platform_data/intel-spi.h>
+#include <linux/platform_data/x86/intel-spi.h>
 
 struct intel_spi;
 struct resource;

drivers/mtd/spi-nor/core.c

@@ -1034,7 +1034,7 @@ static int spi_nor_write_16bit_sr_and_check(struct spi_nor *nor, u8 sr1)
  *
  * Return: 0 on success, -errno otherwise.
  */
-static int spi_nor_write_16bit_cr_and_check(struct spi_nor *nor, u8 cr)
+int spi_nor_write_16bit_cr_and_check(struct spi_nor *nor, u8 cr)
 {
 	int ret;
 	u8 *sr_cr = nor->bouncebuf;
@@ -1610,6 +1610,9 @@ static int spi_nor_erase_multi_sectors(struct spi_nor *nor, u64 addr, u32 len)
 	list_for_each_entry_safe(cmd, next, &erase_list, list) {
 		nor->erase_opcode = cmd->opcode;
 		while (cmd->count) {
+			dev_vdbg(nor->dev, "erase_cmd->size = 0x%08x, erase_cmd->opcode = 0x%02x, erase_cmd->count = %u\n",
+				 cmd->size, cmd->opcode, cmd->count);
+
 			ret = spi_nor_write_enable(nor);
 			if (ret)
 				goto destroy_erase_cmd_list;
@@ -1618,12 +1621,12 @@ static int spi_nor_erase_multi_sectors(struct spi_nor *nor, u64 addr, u32 len)
 			if (ret)
 				goto destroy_erase_cmd_list;
 
-			addr += cmd->size;
-			cmd->count--;
-
 			ret = spi_nor_wait_till_ready(nor);
 			if (ret)
 				goto destroy_erase_cmd_list;
+
+			addr += cmd->size;
+			cmd->count--;
 		}
 		list_del(&cmd->list);
 		kfree(cmd);
@@ -1704,12 +1707,12 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
 			if (ret)
 				goto erase_err;
 
-			addr += mtd->erasesize;
-			len -= mtd->erasesize;
-
 			ret = spi_nor_wait_till_ready(nor);
 			if (ret)
 				goto erase_err;
+
+			addr += mtd->erasesize;
+			len -= mtd->erasesize;
 		}
 
 	/* erase multiple sectors */
@@ -1727,376 +1730,6 @@ erase_err:
 	return ret;
 }
 
-static u8 spi_nor_get_sr_bp_mask(struct spi_nor *nor)
-{
-	u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
-
-	if (nor->flags & SNOR_F_HAS_SR_BP3_BIT6)
-		return mask | SR_BP3_BIT6;
-
-	if (nor->flags & SNOR_F_HAS_4BIT_BP)
-		return mask | SR_BP3;
-
-	return mask;
-}
-
-static u8 spi_nor_get_sr_tb_mask(struct spi_nor *nor)
-{
-	if (nor->flags & SNOR_F_HAS_SR_TB_BIT6)
-		return SR_TB_BIT6;
-	else
-		return SR_TB_BIT5;
-}
-
-static u64 spi_nor_get_min_prot_length_sr(struct spi_nor *nor)
-{
-	unsigned int bp_slots, bp_slots_needed;
-	u8 mask = spi_nor_get_sr_bp_mask(nor);
-
-	/* Reserved one for "protect none" and one for "protect all". */
-	bp_slots = (1 << hweight8(mask)) - 2;
-	bp_slots_needed = ilog2(nor->info->n_sectors);
-
-	if (bp_slots_needed > bp_slots)
-		return nor->info->sector_size <<
-			(bp_slots_needed - bp_slots);
-	else
-		return nor->info->sector_size;
-}
-
-static void spi_nor_get_locked_range_sr(struct spi_nor *nor, u8 sr, loff_t *ofs,
-					uint64_t *len)
-{
-	struct mtd_info *mtd = &nor->mtd;
-	u64 min_prot_len;
-	u8 mask = spi_nor_get_sr_bp_mask(nor);
-	u8 tb_mask = spi_nor_get_sr_tb_mask(nor);
-	u8 bp, val = sr & mask;
-
-	if (nor->flags & SNOR_F_HAS_SR_BP3_BIT6 && val & SR_BP3_BIT6)
-		val = (val & ~SR_BP3_BIT6) | SR_BP3;
-
-	bp = val >> SR_BP_SHIFT;
-
-	if (!bp) {
-		/* No protection */
-		*ofs = 0;
-		*len = 0;
-		return;
-	}
-
-	min_prot_len = spi_nor_get_min_prot_length_sr(nor);
-	*len = min_prot_len << (bp - 1);
-
-	if (*len > mtd->size)
-		*len = mtd->size;
-
-	if (nor->flags & SNOR_F_HAS_SR_TB && sr & tb_mask)
-		*ofs = 0;
-	else
-		*ofs = mtd->size - *len;
-}
-
-/*
- * Return 1 if the entire region is locked (if @locked is true) or unlocked (if
- * @locked is false); 0 otherwise
- */
-static int spi_nor_check_lock_status_sr(struct spi_nor *nor, loff_t ofs,
-					uint64_t len, u8 sr, bool locked)
-{
-	loff_t lock_offs;
-	uint64_t lock_len;
-
-	if (!len)
-		return 1;
-
-	spi_nor_get_locked_range_sr(nor, sr, &lock_offs, &lock_len);
-
-	if (locked)
-		/* Requested range is a sub-range of locked range */
-		return (ofs + len <= lock_offs + lock_len) && (ofs >= lock_offs);
-	else
-		/* Requested range does not overlap with locked range */
-		return (ofs >= lock_offs + lock_len) || (ofs + len <= lock_offs);
-}
-
-static int spi_nor_is_locked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
-				u8 sr)
-{
-	return spi_nor_check_lock_status_sr(nor, ofs, len, sr, true);
-}
-
-static int spi_nor_is_unlocked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
-				  u8 sr)
-{
-	return spi_nor_check_lock_status_sr(nor, ofs, len, sr, false);
-}
-
-/*
- * Lock a region of the flash. Compatible with ST Micro and similar flash.
- * Supports the block protection bits BP{0,1,2}/BP{0,1,2,3} in the status
- * register
- * (SR). Does not support these features found in newer SR bitfields:
- *   - SEC: sector/block protect - only handle SEC=0 (block protect)
- *   - CMP: complement protect - only support CMP=0 (range is not complemented)
- *
- * Support for the following is provided conditionally for some flash:
- *   - TB: top/bottom protect
- *
- * Sample table portion for 8MB flash (Winbond w25q64fw):
- *
- *   SEC  |  TB   |  BP2  |  BP1  |  BP0  |  Prot Length  | Protected Portion
- *  --------------------------------------------------------------------------
- *    X   |   X   |   0   |   0   |   0   |  NONE         | NONE
- *    0   |   0   |   0   |   0   |   1   |  128 KB       | Upper 1/64
- *    0   |   0   |   0   |   1   |   0   |  256 KB       | Upper 1/32
- *    0   |   0   |   0   |   1   |   1   |  512 KB       | Upper 1/16
- *    0   |   0   |   1   |   0   |   0   |  1 MB         | Upper 1/8
- *    0   |   0   |   1   |   0   |   1   |  2 MB         | Upper 1/4
- *    0   |   0   |   1   |   1   |   0   |  4 MB         | Upper 1/2
- *    X   |   X   |   1   |   1   |   1   |  8 MB         | ALL
- *  ------|-------|-------|-------|-------|---------------|-------------------
- *    0   |   1   |   0   |   0   |   1   |  128 KB       | Lower 1/64
- *    0   |   1   |   0   |   1   |   0   |  256 KB       | Lower 1/32
- *    0   |   1   |   0   |   1   |   1   |  512 KB       | Lower 1/16
- *    0   |   1   |   1   |   0   |   0   |  1 MB         | Lower 1/8
- *    0   |   1   |   1   |   0   |   1   |  2 MB         | Lower 1/4
- *    0   |   1   |   1   |   1   |   0   |  4 MB         | Lower 1/2
- *
- * Returns negative on errors, 0 on success.
- */
-static int spi_nor_sr_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
-{
-	struct mtd_info *mtd = &nor->mtd;
-	u64 min_prot_len;
-	int ret, status_old, status_new;
-	u8 mask = spi_nor_get_sr_bp_mask(nor);
-	u8 tb_mask = spi_nor_get_sr_tb_mask(nor);
-	u8 pow, val;
-	loff_t lock_len;
-	bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB;
-	bool use_top;
-
-	ret = spi_nor_read_sr(nor, nor->bouncebuf);
-	if (ret)
-		return ret;
-
-	status_old = nor->bouncebuf[0];
-
-	/* If nothing in our range is unlocked, we don't need to do anything */
-	if (spi_nor_is_locked_sr(nor, ofs, len, status_old))
-		return 0;
-
-	/* If anything below us is unlocked, we can't use 'bottom' protection */
-	if (!spi_nor_is_locked_sr(nor, 0, ofs, status_old))
-		can_be_bottom = false;
-
-	/* If anything above us is unlocked, we can't use 'top' protection */
-	if (!spi_nor_is_locked_sr(nor, ofs + len, mtd->size - (ofs + len),
-				  status_old))
-		can_be_top = false;
-
-	if (!can_be_bottom && !can_be_top)
-		return -EINVAL;
-
-	/* Prefer top, if both are valid */
-	use_top = can_be_top;
-
-	/* lock_len: length of region that should end up locked */
-	if (use_top)
-		lock_len = mtd->size - ofs;
-	else
-		lock_len = ofs + len;
-
-	if (lock_len == mtd->size) {
-		val = mask;
-	} else {
-		min_prot_len = spi_nor_get_min_prot_length_sr(nor);
-		pow = ilog2(lock_len) - ilog2(min_prot_len) + 1;
-		val = pow << SR_BP_SHIFT;
-
-		if (nor->flags & SNOR_F_HAS_SR_BP3_BIT6 && val & SR_BP3)
-			val = (val & ~SR_BP3) | SR_BP3_BIT6;
-
-		if (val & ~mask)
-			return -EINVAL;
-
-		/* Don't "lock" with no region! */
-		if (!(val & mask))
-			return -EINVAL;
-	}
-
-	status_new = (status_old & ~mask & ~tb_mask) | val;
-
-	/* Disallow further writes if WP pin is asserted */
-	status_new |= SR_SRWD;
-
-	if (!use_top)
-		status_new |= tb_mask;
-
-	/* Don't bother if they're the same */
-	if (status_new == status_old)
-		return 0;
-
-	/* Only modify protection if it will not unlock other areas */
-	if ((status_new & mask) < (status_old & mask))
-		return -EINVAL;
-
-	return spi_nor_write_sr_and_check(nor, status_new);
-}
-
-/*
- * Unlock a region of the flash. See spi_nor_sr_lock() for more info
- *
- * Returns negative on errors, 0 on success.
- */
-static int spi_nor_sr_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
-{
-	struct mtd_info *mtd = &nor->mtd;
-	u64 min_prot_len;
-	int ret, status_old, status_new;
-	u8 mask = spi_nor_get_sr_bp_mask(nor);
-	u8 tb_mask = spi_nor_get_sr_tb_mask(nor);
-	u8 pow, val;
-	loff_t lock_len;
-	bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB;
-	bool use_top;
-
-	ret = spi_nor_read_sr(nor, nor->bouncebuf);
-	if (ret)
-		return ret;
-
-	status_old = nor->bouncebuf[0];
-
-	/* If nothing in our range is locked, we don't need to do anything */
-	if (spi_nor_is_unlocked_sr(nor, ofs, len, status_old))
-		return 0;
-
-	/* If anything below us is locked, we can't use 'top' protection */
-	if (!spi_nor_is_unlocked_sr(nor, 0, ofs, status_old))
-		can_be_top = false;
-
-	/* If anything above us is locked, we can't use 'bottom' protection */
-	if (!spi_nor_is_unlocked_sr(nor, ofs + len, mtd->size - (ofs + len),
-				    status_old))
-		can_be_bottom = false;
-
-	if (!can_be_bottom && !can_be_top)
-		return -EINVAL;
-
-	/* Prefer top, if both are valid */
-	use_top = can_be_top;
-
-	/* lock_len: length of region that should remain locked */
-	if (use_top)
-		lock_len = mtd->size - (ofs + len);
-	else
-		lock_len = ofs;
-
-	if (lock_len == 0) {
-		val = 0; /* fully unlocked */
-	} else {
-		min_prot_len = spi_nor_get_min_prot_length_sr(nor);
-		pow = ilog2(lock_len) - ilog2(min_prot_len) + 1;
-		val = pow << SR_BP_SHIFT;
-
-		if (nor->flags & SNOR_F_HAS_SR_BP3_BIT6 && val & SR_BP3)
-			val = (val & ~SR_BP3) | SR_BP3_BIT6;
-
-		/* Some power-of-two sizes are not supported */
-		if (val & ~mask)
-			return -EINVAL;
-	}
-
-	status_new = (status_old & ~mask & ~tb_mask) | val;
-
-	/* Don't protect status register if we're fully unlocked */
-	if (lock_len == 0)
-		status_new &= ~SR_SRWD;
-
-	if (!use_top)
-		status_new |= tb_mask;
-
-	/* Don't bother if they're the same */
-	if (status_new == status_old)
-		return 0;
-
-	/* Only modify protection if it will not lock other areas */
-	if ((status_new & mask) > (status_old & mask))
-		return -EINVAL;
-
-	return spi_nor_write_sr_and_check(nor, status_new);
-}
-
-/*
- * Check if a region of the flash is (completely) locked. See spi_nor_sr_lock()
- * for more info.
- *
- * Returns 1 if entire region is locked, 0 if any portion is unlocked, and
- * negative on errors.
- */
-static int spi_nor_sr_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len)
-{
-	int ret;
-
-	ret = spi_nor_read_sr(nor, nor->bouncebuf);
-	if (ret)
-		return ret;
-
-	return spi_nor_is_locked_sr(nor, ofs, len, nor->bouncebuf[0]);
-}
-
-static const struct spi_nor_locking_ops spi_nor_sr_locking_ops = {
-	.lock = spi_nor_sr_lock,
-	.unlock = spi_nor_sr_unlock,
-	.is_locked = spi_nor_sr_is_locked,
-};
-
-static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
-{
-	struct spi_nor *nor = mtd_to_spi_nor(mtd);
-	int ret;
-
-	ret = spi_nor_lock_and_prep(nor);
-	if (ret)
-		return ret;
-
-	ret = nor->params->locking_ops->lock(nor, ofs, len);
-
-	spi_nor_unlock_and_unprep(nor);
-	return ret;
-}
-
-static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
-{
-	struct spi_nor *nor = mtd_to_spi_nor(mtd);
-	int ret;
-
-	ret = spi_nor_lock_and_prep(nor);
-	if (ret)
-		return ret;
-
-	ret = nor->params->locking_ops->unlock(nor, ofs, len);
-
-	spi_nor_unlock_and_unprep(nor);
-	return ret;
-}
-
-static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
-{
-	struct spi_nor *nor = mtd_to_spi_nor(mtd);
-	int ret;
-
-	ret = spi_nor_lock_and_prep(nor);
-	if (ret)
-		return ret;
-
-	ret = nor->params->locking_ops->is_locked(nor, ofs, len);
-
-	spi_nor_unlock_and_unprep(nor);
-	return ret;
-}
-
 /**
  * spi_nor_sr1_bit6_quad_enable() - Set the Quad Enable BIT(6) in the Status
  * Register 1.
@@ -2336,11 +1969,8 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
 		 * If page_size is a power of two, the offset can be quickly
 		 * calculated with an AND operation. On the other cases we
 		 * need to do a modulus operation (more expensive).
-		 * Power of two numbers have only one bit set and we can use
-		 * the instruction hweight32 to detect if we need to do a
-		 * modulus (do_div()) or not.
 		 */
-		if (hweight32(nor->page_size) == 1) {
+		if (is_power_of_2(nor->page_size)) {
 			page_offset = addr & (nor->page_size - 1);
 		} else {
 			uint64_t aux = addr;
@@ -2626,22 +2256,20 @@ void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map,
 
 int spi_nor_post_bfpt_fixups(struct spi_nor *nor,
 			     const struct sfdp_parameter_header *bfpt_header,
-			     const struct sfdp_bfpt *bfpt,
+			     const struct sfdp_bfpt *bfpt)
-			     struct spi_nor_flash_parameter *params)
 {
 	int ret;
 
 	if (nor->manufacturer && nor->manufacturer->fixups &&
 	    nor->manufacturer->fixups->post_bfpt) {
 		ret = nor->manufacturer->fixups->post_bfpt(nor, bfpt_header,
-							   bfpt, params);
+							   bfpt);
 		if (ret)
 			return ret;
 	}
 
 	if (nor->info->fixups && nor->info->fixups->post_bfpt)
-		return nor->info->fixups->post_bfpt(nor, bfpt_header, bfpt,
+		return nor->info->fixups->post_bfpt(nor, bfpt_header, bfpt);
-						    params);
 
 	return 0;
 }
@@ -2896,7 +2524,7 @@ static void spi_nor_sfdp_init_params(struct spi_nor *nor)
 
 	memcpy(&sfdp_params, nor->params, sizeof(sfdp_params));
 
-	if (spi_nor_parse_sfdp(nor, nor->params)) {
+	if (spi_nor_parse_sfdp(nor)) {
 		memcpy(nor->params, &sfdp_params, sizeof(*nor->params));
 		nor->addr_width = 0;
 		nor->flags &= ~SNOR_F_4B_OPCODES;
@@ -2916,10 +2544,12 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
 	struct device_node *np = spi_nor_get_flash_node(nor);
 	u8 i, erase_mask;
 
-	/* Initialize legacy flash parameters and settings. */
+	/* Initialize default flash parameters and settings. */
 	params->quad_enable = spi_nor_sr2_bit1_quad_enable;
 	params->set_4byte_addr_mode = spansion_set_4byte_addr_mode;
 	params->setup = spi_nor_default_setup;
+	params->otp.org = &info->otp_org;
+
 	/* Default to 16-bit Write Status (01h) Command */
 	nor->flags |= SNOR_F_HAS_16BIT_SR;
 
@@ -3048,7 +2678,7 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
 	 * the default ones.
 	 */
 	if (nor->flags & SNOR_F_HAS_LOCK && !nor->params->locking_ops)
-		nor->params->locking_ops = &spi_nor_sr_locking_ops;
+		spi_nor_init_default_locking_ops(nor);
 }
 
 /**
@@ -3160,32 +2790,6 @@ static int spi_nor_quad_enable(struct spi_nor *nor)
 	return nor->params->quad_enable(nor);
 }
 
-/**
- * spi_nor_try_unlock_all() - Tries to unlock the entire flash memory array.
- * @nor:	pointer to a 'struct spi_nor'.
- *
- * Some SPI NOR flashes are write protected by default after a power-on reset
- * cycle, in order to avoid inadvertent writes during power-up. Backward
- * compatibility imposes to unlock the entire flash memory array at power-up
- * by default.
- *
- * Unprotecting the entire flash array will fail for boards which are hardware
- * write-protected. Thus any errors are ignored.
- */
-static void spi_nor_try_unlock_all(struct spi_nor *nor)
-{
-	int ret;
-
-	if (!(nor->flags & SNOR_F_HAS_LOCK))
-		return;
-
-	dev_dbg(nor->dev, "Unprotecting entire flash array\n");
-
-	ret = spi_nor_unlock(&nor->mtd, 0, nor->params->size);
-	if (ret)
-		dev_dbg(nor->dev, "Failed to unlock the entire flash memory array\n");
-}
-
 static int spi_nor_init(struct spi_nor *nor)
 {
 	int err;
@@ -3301,6 +2905,37 @@ static void spi_nor_resume(struct mtd_info *mtd)
 		dev_err(dev, "resume() failed\n");
 }
 
+static int spi_nor_get_device(struct mtd_info *mtd)
+{
+	struct mtd_info *master = mtd_get_master(mtd);
+	struct spi_nor *nor = mtd_to_spi_nor(master);
+	struct device *dev;
+
+	if (nor->spimem)
+		dev = nor->spimem->spi->controller->dev.parent;
+	else
+		dev = nor->dev;
+
+	if (!try_module_get(dev->driver->owner))
+		return -ENODEV;
+
+	return 0;
+}
+
+static void spi_nor_put_device(struct mtd_info *mtd)
+{
+	struct mtd_info *master = mtd_get_master(mtd);
+	struct spi_nor *nor = mtd_to_spi_nor(master);
+	struct device *dev;
+
+	if (nor->spimem)
+		dev = nor->spimem->spi->controller->dev.parent;
+	else
+		dev = nor->dev;
+
+	module_put(dev->driver->owner);
+}
+
 void spi_nor_restore(struct spi_nor *nor)
 {
 	/* restore the addressing mode */
@@ -3495,12 +3130,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	mtd->_read = spi_nor_read;
 	mtd->_suspend = spi_nor_suspend;
 	mtd->_resume = spi_nor_resume;
-
+	mtd->_get_device = spi_nor_get_device;
-	if (nor->params->locking_ops) {
+	mtd->_put_device = spi_nor_put_device;
-		mtd->_lock = spi_nor_lock;
-		mtd->_unlock = spi_nor_unlock;
-		mtd->_is_locked = spi_nor_is_locked;
-	}
 
 	if (info->flags & USE_FSR)
 		nor->flags |= SNOR_F_USE_FSR;
@@ -3553,11 +3184,16 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	if (ret)
 		return ret;
 
+	spi_nor_register_locking_ops(nor);
+
 	/* Send all the required SPI flash commands to initialize device */
 	ret = spi_nor_init(nor);
 	if (ret)
 		return ret;
 
+	/* Configure OTP parameters and ops */
+	spi_nor_otp_init(nor);
+
 	dev_info(dev, "%s (%lld Kbytes)\n", info->name,
 			(long long)mtd->size >> 10);
 

drivers/mtd/spi-nor/core.h

@@ -187,6 +187,46 @@ struct spi_nor_locking_ops {
 	int (*is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
 };
 
+/**
+ * struct spi_nor_otp_organization - Structure to describe the SPI NOR OTP regions
+ * @len:	size of one OTP region in bytes.
+ * @base:	start address of the OTP area.
+ * @offset:	offset between consecutive OTP regions if there are more
+ *              than one.
+ * @n_regions:	number of individual OTP regions.
+ */
+struct spi_nor_otp_organization {
+	size_t len;
+	loff_t base;
+	loff_t offset;
+	unsigned int n_regions;
+};
+
+/**
+ * struct spi_nor_otp_ops - SPI NOR OTP methods
+ * @read:	read from the SPI NOR OTP area.
+ * @write:	write to the SPI NOR OTP area.
+ * @lock:	lock an OTP region.
+ * @is_locked:	check if an OTP region of the SPI NOR is locked.
+ */
+struct spi_nor_otp_ops {
+	int (*read)(struct spi_nor *nor, loff_t addr, size_t len, u8 *buf);
+	int (*write)(struct spi_nor *nor, loff_t addr, size_t len,
+		     const u8 *buf);
+	int (*lock)(struct spi_nor *nor, unsigned int region);
+	int (*is_locked)(struct spi_nor *nor, unsigned int region);
+};
+
+/**
+ * struct spi_nor_otp - SPI NOR OTP grouping structure
+ * @org:	OTP region organization
+ * @ops:	OTP access ops
+ */
+struct spi_nor_otp {
+	const struct spi_nor_otp_organization *org;
+	const struct spi_nor_otp_ops *ops;
+};
+
 /**
  * struct spi_nor_flash_parameter - SPI NOR flash parameters and settings.
  * Includes legacy flash parameters and settings that can be overwritten
@@ -208,6 +248,7 @@ struct spi_nor_locking_ops {
  *                      higher index in the array, the higher priority.
  * @erase_map:		the erase map parsed from the SFDP Sector Map Parameter
  *                      Table.
+ * @otp_info:		describes the OTP regions.
  * @octal_dtr_enable:	enables SPI NOR octal DTR mode.
  * @quad_enable:	enables SPI NOR quad mode.
  * @set_4byte_addr_mode: puts the SPI NOR in 4 byte addressing mode.
@@ -219,6 +260,7 @@ struct spi_nor_locking_ops {
  *                      e.g. different opcodes, specific address calculation,
  *                      page size, etc.
  * @locking_ops:	SPI NOR locking methods.
+ * @otp:		SPI NOR OTP methods.
  */
 struct spi_nor_flash_parameter {
 	u64				size;
@@ -232,6 +274,7 @@ struct spi_nor_flash_parameter {
 	struct spi_nor_pp_command	page_programs[SNOR_CMD_PP_MAX];
 
 	struct spi_nor_erase_map        erase_map;
+	struct spi_nor_otp		otp;
 
 	int (*octal_dtr_enable)(struct spi_nor *nor, bool enable);
 	int (*quad_enable)(struct spi_nor *nor);
@@ -261,8 +304,7 @@ struct spi_nor_fixups {
 	void (*default_init)(struct spi_nor *nor);
 	int (*post_bfpt)(struct spi_nor *nor,
 			 const struct sfdp_parameter_header *bfpt_header,
-			 const struct sfdp_bfpt *bfpt,
+			 const struct sfdp_bfpt *bfpt);
-			 struct spi_nor_flash_parameter *params);
 	void (*post_sfdp)(struct spi_nor *nor);
 };
 
@@ -339,6 +381,8 @@ struct flash_info {
 					 * power-up in a write-protected state.
 					 */
 
+	const struct spi_nor_otp_organization otp_org;
+
 	/* Part specific fixup hooks. */
 	const struct spi_nor_fixups *fixups;
 };
@@ -393,6 +437,14 @@ struct flash_info {
 		.addr_width = 3,					\
 		.flags = SPI_NOR_NO_FR | SPI_NOR_XSR_RDY,
 
+#define OTP_INFO(_len, _n_regions, _base, _offset)			\
+		.otp_org = {						\
+			.len = (_len),					\
+			.base = (_base),				\
+			.offset = (_offset),				\
+			.n_regions = (_n_regions),			\
+		},
+
 /**
  * struct spi_nor_manufacturer - SPI NOR manufacturer object
  * @name: manufacturer name
@@ -444,6 +496,7 @@ int spi_nor_read_sr(struct spi_nor *nor, u8 *sr);
 int spi_nor_read_cr(struct spi_nor *nor, u8 *cr);
 int spi_nor_write_sr(struct spi_nor *nor, const u8 *sr, size_t len);
 int spi_nor_write_sr_and_check(struct spi_nor *nor, u8 sr1);
+int spi_nor_write_16bit_cr_and_check(struct spi_nor *nor, u8 cr);
 
 int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr);
 ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len,
@@ -451,6 +504,12 @@ ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len,
 ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len,
 			   const u8 *buf);
 
+int spi_nor_otp_read_secr(struct spi_nor *nor, loff_t addr, size_t len, u8 *buf);
+int spi_nor_otp_write_secr(struct spi_nor *nor, loff_t addr, size_t len,
+			   const u8 *buf);
+int spi_nor_otp_lock_sr2(struct spi_nor *nor, unsigned int region);
+int spi_nor_otp_is_locked_sr2(struct spi_nor *nor, unsigned int region);
+
 int spi_nor_hwcaps_read2cmd(u32 hwcaps);
 u8 spi_nor_convert_3to4_read(u8 opcode);
 void spi_nor_set_read_settings(struct spi_nor_read_command *read,
@@ -470,8 +529,12 @@ void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map,
 
 int spi_nor_post_bfpt_fixups(struct spi_nor *nor,
 			     const struct sfdp_parameter_header *bfpt_header,
-			     const struct sfdp_bfpt *bfpt,
+			     const struct sfdp_bfpt *bfpt);
-			     struct spi_nor_flash_parameter *params);
+
+void spi_nor_init_default_locking_ops(struct spi_nor *nor);
+void spi_nor_try_unlock_all(struct spi_nor *nor);
+void spi_nor_register_locking_ops(struct spi_nor *nor);
+void spi_nor_otp_init(struct spi_nor *nor);
 
 static struct spi_nor __maybe_unused *mtd_to_spi_nor(struct mtd_info *mtd)
 {

drivers/mtd/spi-nor/issi.c

@@ -11,8 +11,7 @@
 static int
 is25lp256_post_bfpt_fixups(struct spi_nor *nor,
 			   const struct sfdp_parameter_header *bfpt_header,
-			   const struct sfdp_bfpt *bfpt,
+			   const struct sfdp_bfpt *bfpt)
-			   struct spi_nor_flash_parameter *params)
 {
 	/*
 	 * IS25LP256 supports 4B opcodes, but the BFPT advertises a

drivers/mtd/spi-nor/macronix.c

@@ -11,8 +11,7 @@
 static int
 mx25l25635_post_bfpt_fixups(struct spi_nor *nor,
 			    const struct sfdp_parameter_header *bfpt_header,
-			    const struct sfdp_bfpt *bfpt,
+			    const struct sfdp_bfpt *bfpt)
-			    struct spi_nor_flash_parameter *params)
 {
 	/*
 	 * MX25L25635F supports 4B opcodes but MX25L25635E does not.
@@ -73,9 +72,6 @@ static const struct flash_info macronix_parts[] = {
 			      SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
 	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
-	{ "mx25l51245g", INFO(0xc2201a, 0, 64 * 1024, 1024,
-			      SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			      SPI_NOR_4B_OPCODES) },
 	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024,
 			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
 			      SPI_NOR_4B_OPCODES) },

drivers/mtd/spi-nor/otp.c

@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * OTP support for SPI NOR flashes
+ *
+ * Copyright (C) 2021 Michael Walle <michael@walle.cc>
+ */
+
+#include <linux/log2.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+#define spi_nor_otp_region_len(nor) ((nor)->params->otp.org->len)
+#define spi_nor_otp_n_regions(nor) ((nor)->params->otp.org->n_regions)
+
+/**
+ * spi_nor_otp_read_secr() - read OTP data
+ * @nor:	pointer to 'struct spi_nor'
+ * @from:       offset to read from
+ * @len:        number of bytes to read
+ * @buf:        pointer to dst buffer
+ *
+ * Read OTP data from one region by using the SPINOR_OP_RSECR commands. This
+ * method is used on GigaDevice and Winbond flashes.
+ *
+ * Return: number of bytes read successfully, -errno otherwise
+ */
+int spi_nor_otp_read_secr(struct spi_nor *nor, loff_t addr, size_t len, u8 *buf)
+{
+	u8 addr_width, read_opcode, read_dummy;
+	struct spi_mem_dirmap_desc *rdesc;
+	enum spi_nor_protocol read_proto;
+	int ret;
+
+	read_opcode = nor->read_opcode;
+	addr_width = nor->addr_width;
+	read_dummy = nor->read_dummy;
+	read_proto = nor->read_proto;
+	rdesc = nor->dirmap.rdesc;
+
+	nor->read_opcode = SPINOR_OP_RSECR;
+	nor->addr_width = 3;
+	nor->read_dummy = 8;
+	nor->read_proto = SNOR_PROTO_1_1_1;
+	nor->dirmap.rdesc = NULL;
+
+	ret = spi_nor_read_data(nor, addr, len, buf);
+
+	nor->read_opcode = read_opcode;
+	nor->addr_width = addr_width;
+	nor->read_dummy = read_dummy;
+	nor->read_proto = read_proto;
+	nor->dirmap.rdesc = rdesc;
+
+	return ret;
+}
+
+/**
+ * spi_nor_otp_write_secr() - write OTP data
+ * @nor:        pointer to 'struct spi_nor'
+ * @to:         offset to write to
+ * @len:        number of bytes to write
+ * @buf:        pointer to src buffer
+ *
+ * Write OTP data to one region by using the SPINOR_OP_PSECR commands. This
+ * method is used on GigaDevice and Winbond flashes.
+ *
+ * Please note, the write must not span multiple OTP regions.
+ *
+ * Return: number of bytes written successfully, -errno otherwise
+ */
+int spi_nor_otp_write_secr(struct spi_nor *nor, loff_t addr, size_t len,
+			   const u8 *buf)
+{
+	enum spi_nor_protocol write_proto;
+	struct spi_mem_dirmap_desc *wdesc;
+	u8 addr_width, program_opcode;
+	int ret, written;
+
+	program_opcode = nor->program_opcode;
+	addr_width = nor->addr_width;
+	write_proto = nor->write_proto;
+	wdesc = nor->dirmap.wdesc;
+
+	nor->program_opcode = SPINOR_OP_PSECR;
+	nor->addr_width = 3;
+	nor->write_proto = SNOR_PROTO_1_1_1;
+	nor->dirmap.wdesc = NULL;
+
+	/*
+	 * We only support a write to one single page. For now all winbond
+	 * flashes only have one page per OTP region.
+	 */
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		goto out;
+
+	written = spi_nor_write_data(nor, addr, len, buf);
+	if (written < 0)
+		goto out;
+
+	ret = spi_nor_wait_till_ready(nor);
+
+out:
+	nor->program_opcode = program_opcode;
+	nor->addr_width = addr_width;
+	nor->write_proto = write_proto;
+	nor->dirmap.wdesc = wdesc;
+
+	return ret ?: written;
+}
+
+static int spi_nor_otp_lock_bit_cr(unsigned int region)
+{
+	static const int lock_bits[] = { SR2_LB1, SR2_LB2, SR2_LB3 };
+
+	if (region >= ARRAY_SIZE(lock_bits))
+		return -EINVAL;
+
+	return lock_bits[region];
+}
+
+/**
+ * spi_nor_otp_lock_sr2() - lock the OTP region
+ * @nor:        pointer to 'struct spi_nor'
+ * @region:     OTP region
+ *
+ * Lock the OTP region by writing the status register-2. This method is used on
+ * GigaDevice and Winbond flashes.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_otp_lock_sr2(struct spi_nor *nor, unsigned int region)
+{
+	u8 *cr = nor->bouncebuf;
+	int ret, lock_bit;
+
+	lock_bit = spi_nor_otp_lock_bit_cr(region);
+	if (lock_bit < 0)
+		return lock_bit;
+
+	ret = spi_nor_read_cr(nor, cr);
+	if (ret)
+		return ret;
+
+	/* no need to write the register if region is already locked */
+	if (cr[0] & lock_bit)
+		return 0;
+
+	cr[0] |= lock_bit;
+
+	return spi_nor_write_16bit_cr_and_check(nor, cr[0]);
+}
+
+/**
+ * spi_nor_otp_is_locked_sr2() - get the OTP region lock status
+ * @nor:        pointer to 'struct spi_nor'
+ * @region:     OTP region
+ *
+ * Retrieve the OTP region lock bit by reading the status register-2. This
+ * method is used on GigaDevice and Winbond flashes.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_otp_is_locked_sr2(struct spi_nor *nor, unsigned int region)
+{
+	u8 *cr = nor->bouncebuf;
+	int ret, lock_bit;
+
+	lock_bit = spi_nor_otp_lock_bit_cr(region);
+	if (lock_bit < 0)
+		return lock_bit;
+
+	ret = spi_nor_read_cr(nor, cr);
+	if (ret)
+		return ret;
+
+	return cr[0] & lock_bit;
+}
+
+static loff_t spi_nor_otp_region_start(const struct spi_nor *nor, unsigned int region)
+{
+	const struct spi_nor_otp_organization *org = nor->params->otp.org;
+
+	return org->base + region * org->offset;
+}
+
+static size_t spi_nor_otp_size(struct spi_nor *nor)
+{
+	return spi_nor_otp_n_regions(nor) * spi_nor_otp_region_len(nor);
+}
+
+/* Translate the file offsets from and to OTP regions. */
+static loff_t spi_nor_otp_region_to_offset(struct spi_nor *nor, unsigned int region)
+{
+	return region * spi_nor_otp_region_len(nor);
+}
+
+static unsigned int spi_nor_otp_offset_to_region(struct spi_nor *nor, loff_t ofs)
+{
+	return div64_u64(ofs, spi_nor_otp_region_len(nor));
+}
+
+static int spi_nor_mtd_otp_info(struct mtd_info *mtd, size_t len,
+				size_t *retlen, struct otp_info *buf)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	const struct spi_nor_otp_ops *ops = nor->params->otp.ops;
+	unsigned int n_regions = spi_nor_otp_n_regions(nor);
+	unsigned int i;
+	int ret, locked;
+
+	if (len < n_regions * sizeof(*buf))
+		return -ENOSPC;
+
+	ret = spi_nor_lock_and_prep(nor);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < n_regions; i++) {
+		buf->start = spi_nor_otp_region_to_offset(nor, i);
+		buf->length = spi_nor_otp_region_len(nor);
+
+		locked = ops->is_locked(nor, i);
+		if (locked < 0) {
+			ret = locked;
+			goto out;
+		}
+
+		buf->locked = !!locked;
+		buf++;
+	}
+
+	*retlen = n_regions * sizeof(*buf);
+
+out:
+	spi_nor_unlock_and_unprep(nor);
+
+	return ret;
+}
+
+static int spi_nor_mtd_otp_read_write(struct mtd_info *mtd, loff_t ofs,
+				      size_t total_len, size_t *retlen,
+				      const u8 *buf, bool is_write)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	const struct spi_nor_otp_ops *ops = nor->params->otp.ops;
+	const size_t rlen = spi_nor_otp_region_len(nor);
+	loff_t rstart, rofs;
+	unsigned int region;
+	size_t len;
+	int ret;
+
+	if (ofs < 0 || ofs >= spi_nor_otp_size(nor))
+		return 0;
+
+	ret = spi_nor_lock_and_prep(nor);
+	if (ret)
+		return ret;
+
+	/* don't access beyond the end */
+	total_len = min_t(size_t, total_len, spi_nor_otp_size(nor) - ofs);
+
+	*retlen = 0;
+	while (total_len) {
+		/*
+		 * The OTP regions are mapped into a contiguous area starting
+		 * at 0 as expected by the MTD layer. This will map the MTD
+		 * file offsets to the address of an OTP region as used in the
+		 * actual SPI commands.
+		 */
+		region = spi_nor_otp_offset_to_region(nor, ofs);
+		rstart = spi_nor_otp_region_start(nor, region);
+
+		/*
+		 * The size of a OTP region is expected to be a power of two,
+		 * thus we can just mask the lower bits and get the offset into
+		 * a region.
+		 */
+		rofs = ofs & (rlen - 1);
+
+		/* don't access beyond one OTP region */
+		len = min_t(size_t, total_len, rlen - rofs);
+
+		if (is_write)
+			ret = ops->write(nor, rstart + rofs, len, buf);
+		else
+			ret = ops->read(nor, rstart + rofs, len, (u8 *)buf);
+		if (ret == 0)
+			ret = -EIO;
+		if (ret < 0)
+			goto out;
+
+		*retlen += ret;
+		ofs += ret;
+		buf += ret;
+		total_len -= ret;
+	}
+	ret = 0;
+
+out:
+	spi_nor_unlock_and_unprep(nor);
+	return ret;
+}
+
+static int spi_nor_mtd_otp_read(struct mtd_info *mtd, loff_t from, size_t len,
+				size_t *retlen, u8 *buf)
+{
+	return spi_nor_mtd_otp_read_write(mtd, from, len, retlen, buf, false);
+}
+
+static int spi_nor_mtd_otp_write(struct mtd_info *mtd, loff_t to, size_t len,
+				 size_t *retlen, const u8 *buf)
+{
+	return spi_nor_mtd_otp_read_write(mtd, to, len, retlen, buf, true);
+}
+
+static int spi_nor_mtd_otp_lock(struct mtd_info *mtd, loff_t from, size_t len)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	const struct spi_nor_otp_ops *ops = nor->params->otp.ops;
+	const size_t rlen = spi_nor_otp_region_len(nor);
+	unsigned int region;
+	int ret;
+
+	if (from < 0 || (from + len) > spi_nor_otp_size(nor))
+		return -EINVAL;
+
+	/* the user has to explicitly ask for whole regions */
+	if (!IS_ALIGNED(len, rlen) || !IS_ALIGNED(from, rlen))
+		return -EINVAL;
+
+	ret = spi_nor_lock_and_prep(nor);
+	if (ret)
+		return ret;
+
+	while (len) {
+		region = spi_nor_otp_offset_to_region(nor, from);
+		ret = ops->lock(nor, region);
+		if (ret)
+			goto out;
+
+		len -= rlen;
+		from += rlen;
+	}
+
+out:
+	spi_nor_unlock_and_unprep(nor);
+
+	return ret;
+}
+
+void spi_nor_otp_init(struct spi_nor *nor)
+{
+	struct mtd_info *mtd = &nor->mtd;
+
+	if (!nor->params->otp.ops)
+		return;
+
+	if (WARN_ON(!is_power_of_2(spi_nor_otp_region_len(nor))))
+		return;
+
+	/*
+	 * We only support user_prot callbacks (yet).
+	 *
+	 * Some SPI NOR flashes like Macronix ones can be ordered in two
+	 * different variants. One with a factory locked OTP area and one where
+	 * it is left to the user to write to it. The factory locked OTP is
+	 * usually preprogrammed with an "electrical serial number". We don't
+	 * support these for now.
+	 */
+	mtd->_get_user_prot_info = spi_nor_mtd_otp_info;
+	mtd->_read_user_prot_reg = spi_nor_mtd_otp_read;
+	mtd->_write_user_prot_reg = spi_nor_mtd_otp_write;
+	mtd->_lock_user_prot_reg = spi_nor_mtd_otp_lock;
+}

drivers/mtd/spi-nor/sfdp.c

@@ -405,8 +405,6 @@ static void spi_nor_regions_sort_erase_types(struct spi_nor_erase_map *map)
  * @nor:		pointer to a 'struct spi_nor'
  * @bfpt_header:	pointer to the 'struct sfdp_parameter_header' describing
  *			the Basic Flash Parameter Table length and version
- * @params:		pointer to the 'struct spi_nor_flash_parameter' to be
- *			filled
  *
  * The Basic Flash Parameter Table is the main and only mandatory table as
  * defined by the SFDP (JESD216) specification.
@@ -431,9 +429,9 @@ static void spi_nor_regions_sort_erase_types(struct spi_nor_erase_map *map)
  * Return: 0 on success, -errno otherwise.
  */
 static int spi_nor_parse_bfpt(struct spi_nor *nor,
-			      const struct sfdp_parameter_header *bfpt_header,
+			      const struct sfdp_parameter_header *bfpt_header)
-			      struct spi_nor_flash_parameter *params)
 {
+	struct spi_nor_flash_parameter *params = nor->params;
 	struct spi_nor_erase_map *map = &params->erase_map;
 	struct spi_nor_erase_type *erase_type = map->erase_type;
 	struct sfdp_bfpt bfpt;
@@ -552,8 +550,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
 
 	/* Stop here if not JESD216 rev A or later. */
 	if (bfpt_header->length == BFPT_DWORD_MAX_JESD216)
-		return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt,
+		return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt);
-						params);
 
 	/* Page size: this field specifies 'N' so the page size = 2^N bytes. */
 	val = bfpt.dwords[BFPT_DWORD(11)];
@@ -614,8 +611,8 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
 
 	/* Stop here if not JESD216 rev C or later. */
 	if (bfpt_header->length == BFPT_DWORD_MAX_JESD216B)
-		return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt,
+		return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt);
-						params);
+
 	/* 8D-8D-8D command extension. */
 	switch (bfpt.dwords[BFPT_DWORD(18)] & BFPT_DWORD18_CMD_EXT_MASK) {
 	case BFPT_DWORD18_CMD_EXT_REP:
@@ -635,7 +632,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
 		return -EOPNOTSUPP;
 	}
 
-	return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, params);
+	return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt);
 }
 
 /**
@@ -800,18 +797,14 @@ spi_nor_region_check_overlay(struct spi_nor_erase_region *region,
 /**
  * spi_nor_init_non_uniform_erase_map() - initialize the non-uniform erase map
  * @nor:	pointer to a 'struct spi_nor'
- * @params:     pointer to a duplicate 'struct spi_nor_flash_parameter' that is
- *              used for storing SFDP parsed data
  * @smpt:	pointer to the sector map parameter table
  *
  * Return: 0 on success, -errno otherwise.
  */
-static int
+static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
-spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
+					      const u32 *smpt)
-				   struct spi_nor_flash_parameter *params,
-				   const u32 *smpt)
 {
-	struct spi_nor_erase_map *map = &params->erase_map;
+	struct spi_nor_erase_map *map = &nor->params->erase_map;
 	struct spi_nor_erase_type *erase = map->erase_type;
 	struct spi_nor_erase_region *region;
 	u64 offset;
@@ -889,8 +882,6 @@ spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
  * spi_nor_parse_smpt() - parse Sector Map Parameter Table
  * @nor:		pointer to a 'struct spi_nor'
  * @smpt_header:	sector map parameter table header
- * @params:		pointer to a duplicate 'struct spi_nor_flash_parameter'
- *                      that is used for storing SFDP parsed data
  *
  * This table is optional, but when available, we parse it to identify the
  * location and size of sectors within the main data array of the flash memory
@@ -899,8 +890,7 @@ spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
  * Return: 0 on success, -errno otherwise.
  */
 static int spi_nor_parse_smpt(struct spi_nor *nor,
-			      const struct sfdp_parameter_header *smpt_header,
+			      const struct sfdp_parameter_header *smpt_header)
-			      struct spi_nor_flash_parameter *params)
 {
 	const u32 *sector_map;
 	u32 *smpt;
@@ -928,11 +918,11 @@ static int spi_nor_parse_smpt(struct spi_nor *nor,
 		goto out;
 	}
 
-	ret = spi_nor_init_non_uniform_erase_map(nor, params, sector_map);
+	ret = spi_nor_init_non_uniform_erase_map(nor, sector_map);
 	if (ret)
 		goto out;
 
-	spi_nor_regions_sort_erase_types(&params->erase_map);
+	spi_nor_regions_sort_erase_types(&nor->params->erase_map);
 	/* fall through */
 out:
 	kfree(smpt);
@@ -944,13 +934,11 @@ out:
  * @nor:		pointer to a 'struct spi_nor'.
  * @param_header:	pointer to the 'struct sfdp_parameter_header' describing
  *			the 4-Byte Address Instruction Table length and version.
- * @params:		pointer to the 'struct spi_nor_flash_parameter' to be.
  *
  * Return: 0 on success, -errno otherwise.
  */
 static int spi_nor_parse_4bait(struct spi_nor *nor,
-			       const struct sfdp_parameter_header *param_header,
+			       const struct sfdp_parameter_header *param_header)
-			       struct spi_nor_flash_parameter *params)
 {
 	static const struct sfdp_4bait reads[] = {
 		{ SNOR_HWCAPS_READ,		BIT(0) },
@@ -974,6 +962,7 @@ static int spi_nor_parse_4bait(struct spi_nor *nor,
 		{ 0u /* not used */,		BIT(11) },
 		{ 0u /* not used */,		BIT(12) },
 	};
+	struct spi_nor_flash_parameter *params = nor->params;
 	struct spi_nor_pp_command *params_pp = params->page_programs;
 	struct spi_nor_erase_map *map = &params->erase_map;
 	struct spi_nor_erase_type *erase_type = map->erase_type;
@@ -1130,13 +1119,11 @@ out:
  * @nor:		pointer to a 'struct spi_nor'
  * @profile1_header:	pointer to the 'struct sfdp_parameter_header' describing
  *			the Profile 1.0 Table length and version.
- * @params:		pointer to the 'struct spi_nor_flash_parameter' to be.
  *
  * Return: 0 on success, -errno otherwise.
  */
 static int spi_nor_parse_profile1(struct spi_nor *nor,
-				  const struct sfdp_parameter_header *profile1_header,
+				  const struct sfdp_parameter_header *profile1_header)
-				  struct spi_nor_flash_parameter *params)
 {
 	u32 *dwords, addr;
 	size_t len;
@@ -1160,14 +1147,14 @@ static int spi_nor_parse_profile1(struct spi_nor *nor,
 
 	 /* Set the Read Status Register dummy cycles and dummy address bytes. */
 	if (dwords[0] & PROFILE1_DWORD1_RDSR_DUMMY)
-		params->rdsr_dummy = 8;
+		nor->params->rdsr_dummy = 8;
 	else
-		params->rdsr_dummy = 4;
+		nor->params->rdsr_dummy = 4;
 
 	if (dwords[0] & PROFILE1_DWORD1_RDSR_ADDR_BYTES)
-		params->rdsr_addr_nbytes = 4;
+		nor->params->rdsr_addr_nbytes = 4;
 	else
-		params->rdsr_addr_nbytes = 0;
+		nor->params->rdsr_addr_nbytes = 0;
 
 	/*
 	 * We don't know what speed the controller is running at. Find the
@@ -1193,7 +1180,7 @@ static int spi_nor_parse_profile1(struct spi_nor *nor,
 	dummy = round_up(dummy, 2);
 
 	/* Update the fast read settings. */
-	spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_8_8_8_DTR],
+	spi_nor_set_read_settings(&nor->params->reads[SNOR_CMD_READ_8_8_8_DTR],
 				  0, dummy, opcode,
 				  SNOR_PROTO_8_8_8_DTR);
 
@@ -1210,13 +1197,11 @@ out:
  * @nor:		pointer to a 'struct spi_nor'
  * @sccr_header:	pointer to the 'struct sfdp_parameter_header' describing
  *			the SCCR Map table length and version.
- * @params:		pointer to the 'struct spi_nor_flash_parameter' to be.
  *
  * Return: 0 on success, -errno otherwise.
  */
 static int spi_nor_parse_sccr(struct spi_nor *nor,
-			      const struct sfdp_parameter_header *sccr_header,
+			      const struct sfdp_parameter_header *sccr_header)
-			      struct spi_nor_flash_parameter *params)
 {
 	u32 *dwords, addr;
 	size_t len;
@@ -1245,8 +1230,6 @@ out:
 /**
  * spi_nor_parse_sfdp() - parse the Serial Flash Discoverable Parameters.
  * @nor:		pointer to a 'struct spi_nor'
- * @params:		pointer to the 'struct spi_nor_flash_parameter' to be
- *			filled
  *
  * The Serial Flash Discoverable Parameters are described by the JEDEC JESD216
  * specification. This is a standard which tends to supported by almost all
@@ -1256,8 +1239,7 @@ out:
  *
  * Return: 0 on success, -errno otherwise.
  */
-int spi_nor_parse_sfdp(struct spi_nor *nor,
+int spi_nor_parse_sfdp(struct spi_nor *nor)
-		       struct spi_nor_flash_parameter *params)
 {
 	const struct sfdp_parameter_header *param_header, *bfpt_header;
 	struct sfdp_parameter_header *param_headers = NULL;
@@ -1326,7 +1308,7 @@ int spi_nor_parse_sfdp(struct spi_nor *nor,
 			bfpt_header = param_header;
 	}
 
-	err = spi_nor_parse_bfpt(nor, bfpt_header, params);
+	err = spi_nor_parse_bfpt(nor, bfpt_header);
 	if (err)
 		goto exit;
 
@@ -1336,19 +1318,19 @@ int spi_nor_parse_sfdp(struct spi_nor *nor,
 
 		switch (SFDP_PARAM_HEADER_ID(param_header)) {
 		case SFDP_SECTOR_MAP_ID:
-			err = spi_nor_parse_smpt(nor, param_header, params);
+			err = spi_nor_parse_smpt(nor, param_header);
 			break;
 
 		case SFDP_4BAIT_ID:
-			err = spi_nor_parse_4bait(nor, param_header, params);
+			err = spi_nor_parse_4bait(nor, param_header);
 			break;
 
 		case SFDP_PROFILE1_ID:
-			err = spi_nor_parse_profile1(nor, param_header, params);
+			err = spi_nor_parse_profile1(nor, param_header);
 			break;
 
 		case SFDP_SCCR_MAP_ID:
-			err = spi_nor_parse_sccr(nor, param_header, params);
+			err = spi_nor_parse_sccr(nor, param_header);
 			break;
 
 		default:

drivers/mtd/spi-nor/sfdp.h

@@ -107,7 +107,6 @@ struct sfdp_parameter_header {
 	u8		id_msb;
 };
 
-int spi_nor_parse_sfdp(struct spi_nor *nor,
+int spi_nor_parse_sfdp(struct spi_nor *nor);
-		       struct spi_nor_flash_parameter *params);
 
 #endif /* __LINUX_MTD_SFDP_H */

drivers/mtd/spi-nor/spansion.c

@@ -142,8 +142,7 @@ static void s28hs512t_post_sfdp_fixup(struct spi_nor *nor)
 
 static int s28hs512t_post_bfpt_fixup(struct spi_nor *nor,
 				     const struct sfdp_parameter_header *bfpt_header,
-				     const struct sfdp_bfpt *bfpt,
+				     const struct sfdp_bfpt *bfpt)
-				     struct spi_nor_flash_parameter *params)
 {
 	/*
 	 * The BFPT table advertises a 512B page size but the page size is
@@ -162,9 +161,9 @@ static int s28hs512t_post_bfpt_fixup(struct spi_nor *nor,
 		return ret;
 
 	if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR3V_PGSZ)
-		params->page_size = 512;
+		nor->params->page_size = 512;
 	else
-		params->page_size = 256;
+		nor->params->page_size = 256;
 
 	return 0;
 }
@@ -178,8 +177,7 @@ static struct spi_nor_fixups s28hs512t_fixups = {
 static int
 s25fs_s_post_bfpt_fixups(struct spi_nor *nor,
 			 const struct sfdp_parameter_header *bfpt_header,
-			 const struct sfdp_bfpt *bfpt,
+			 const struct sfdp_bfpt *bfpt)
-			 struct spi_nor_flash_parameter *params)
 {
 	/*
 	 * The S25FS-S chip family reports 512-byte pages in BFPT but
@@ -187,7 +185,7 @@ s25fs_s_post_bfpt_fixups(struct spi_nor *nor,
 	 * of 256 bytes.  Overwrite the page size advertised by BFPT
 	 * to get the writes working.
 	 */
-	params->page_size = 256;
+	nor->params->page_size = 256;
 
 	return 0;
 }

drivers/mtd/spi-nor/swp.c

@@ -0,0 +1,427 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SPI NOR Software Write Protection logic.
+ *
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static u8 spi_nor_get_sr_bp_mask(struct spi_nor *nor)
+{
+	u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
+
+	if (nor->flags & SNOR_F_HAS_SR_BP3_BIT6)
+		return mask | SR_BP3_BIT6;
+
+	if (nor->flags & SNOR_F_HAS_4BIT_BP)
+		return mask | SR_BP3;
+
+	return mask;
+}
+
+static u8 spi_nor_get_sr_tb_mask(struct spi_nor *nor)
+{
+	if (nor->flags & SNOR_F_HAS_SR_TB_BIT6)
+		return SR_TB_BIT6;
+	else
+		return SR_TB_BIT5;
+}
+
+static u64 spi_nor_get_min_prot_length_sr(struct spi_nor *nor)
+{
+	unsigned int bp_slots, bp_slots_needed;
+	u8 mask = spi_nor_get_sr_bp_mask(nor);
+
+	/* Reserved one for "protect none" and one for "protect all". */
+	bp_slots = (1 << hweight8(mask)) - 2;
+	bp_slots_needed = ilog2(nor->info->n_sectors);
+
+	if (bp_slots_needed > bp_slots)
+		return nor->info->sector_size <<
+			(bp_slots_needed - bp_slots);
+	else
+		return nor->info->sector_size;
+}
+
+static void spi_nor_get_locked_range_sr(struct spi_nor *nor, u8 sr, loff_t *ofs,
+					uint64_t *len)
+{
+	struct mtd_info *mtd = &nor->mtd;
+	u64 min_prot_len;
+	u8 mask = spi_nor_get_sr_bp_mask(nor);
+	u8 tb_mask = spi_nor_get_sr_tb_mask(nor);
+	u8 bp, val = sr & mask;
+
+	if (nor->flags & SNOR_F_HAS_SR_BP3_BIT6 && val & SR_BP3_BIT6)
+		val = (val & ~SR_BP3_BIT6) | SR_BP3;
+
+	bp = val >> SR_BP_SHIFT;
+
+	if (!bp) {
+		/* No protection */
+		*ofs = 0;
+		*len = 0;
+		return;
+	}
+
+	min_prot_len = spi_nor_get_min_prot_length_sr(nor);
+	*len = min_prot_len << (bp - 1);
+
+	if (*len > mtd->size)
+		*len = mtd->size;
+
+	if (nor->flags & SNOR_F_HAS_SR_TB && sr & tb_mask)
+		*ofs = 0;
+	else
+		*ofs = mtd->size - *len;
+}
+
+/*
+ * Return true if the entire region is locked (if @locked is true) or unlocked
+ * (if @locked is false); false otherwise.
+ */
+static bool spi_nor_check_lock_status_sr(struct spi_nor *nor, loff_t ofs,
+					 uint64_t len, u8 sr, bool locked)
+{
+	loff_t lock_offs, lock_offs_max, offs_max;
+	uint64_t lock_len;
+
+	if (!len)
+		return true;
+
+	spi_nor_get_locked_range_sr(nor, sr, &lock_offs, &lock_len);
+
+	lock_offs_max = lock_offs + lock_len;
+	offs_max = ofs + len;
+
+	if (locked)
+		/* Requested range is a sub-range of locked range */
+		return (offs_max <= lock_offs_max) && (ofs >= lock_offs);
+	else
+		/* Requested range does not overlap with locked range */
+		return (ofs >= lock_offs_max) || (offs_max <= lock_offs);
+}
+
+static bool spi_nor_is_locked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
+				 u8 sr)
+{
+	return spi_nor_check_lock_status_sr(nor, ofs, len, sr, true);
+}
+
+static bool spi_nor_is_unlocked_sr(struct spi_nor *nor, loff_t ofs,
+				   uint64_t len, u8 sr)
+{
+	return spi_nor_check_lock_status_sr(nor, ofs, len, sr, false);
+}
+
+/*
+ * Lock a region of the flash. Compatible with ST Micro and similar flash.
+ * Supports the block protection bits BP{0,1,2}/BP{0,1,2,3} in the status
+ * register
+ * (SR). Does not support these features found in newer SR bitfields:
+ *   - SEC: sector/block protect - only handle SEC=0 (block protect)
+ *   - CMP: complement protect - only support CMP=0 (range is not complemented)
+ *
+ * Support for the following is provided conditionally for some flash:
+ *   - TB: top/bottom protect
+ *
+ * Sample table portion for 8MB flash (Winbond w25q64fw):
+ *
+ *   SEC  |  TB   |  BP2  |  BP1  |  BP0  |  Prot Length  | Protected Portion
+ *  --------------------------------------------------------------------------
+ *    X   |   X   |   0   |   0   |   0   |  NONE         | NONE
+ *    0   |   0   |   0   |   0   |   1   |  128 KB       | Upper 1/64
+ *    0   |   0   |   0   |   1   |   0   |  256 KB       | Upper 1/32
+ *    0   |   0   |   0   |   1   |   1   |  512 KB       | Upper 1/16
+ *    0   |   0   |   1   |   0   |   0   |  1 MB         | Upper 1/8
+ *    0   |   0   |   1   |   0   |   1   |  2 MB         | Upper 1/4
+ *    0   |   0   |   1   |   1   |   0   |  4 MB         | Upper 1/2
+ *    X   |   X   |   1   |   1   |   1   |  8 MB         | ALL
+ *  ------|-------|-------|-------|-------|---------------|-------------------
+ *    0   |   1   |   0   |   0   |   1   |  128 KB       | Lower 1/64
+ *    0   |   1   |   0   |   1   |   0   |  256 KB       | Lower 1/32
+ *    0   |   1   |   0   |   1   |   1   |  512 KB       | Lower 1/16
+ *    0   |   1   |   1   |   0   |   0   |  1 MB         | Lower 1/8
+ *    0   |   1   |   1   |   0   |   1   |  2 MB         | Lower 1/4
+ *    0   |   1   |   1   |   1   |   0   |  4 MB         | Lower 1/2
+ *
+ * Returns negative on errors, 0 on success.
+ */
+static int spi_nor_sr_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+	struct mtd_info *mtd = &nor->mtd;
+	u64 min_prot_len;
+	int ret, status_old, status_new;
+	u8 mask = spi_nor_get_sr_bp_mask(nor);
+	u8 tb_mask = spi_nor_get_sr_tb_mask(nor);
+	u8 pow, val;
+	loff_t lock_len;
+	bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB;
+	bool use_top;
+
+	ret = spi_nor_read_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	status_old = nor->bouncebuf[0];
+
+	/* If nothing in our range is unlocked, we don't need to do anything */
+	if (spi_nor_is_locked_sr(nor, ofs, len, status_old))
+		return 0;
+
+	/* If anything below us is unlocked, we can't use 'bottom' protection */
+	if (!spi_nor_is_locked_sr(nor, 0, ofs, status_old))
+		can_be_bottom = false;
+
+	/* If anything above us is unlocked, we can't use 'top' protection */
+	if (!spi_nor_is_locked_sr(nor, ofs + len, mtd->size - (ofs + len),
+				  status_old))
+		can_be_top = false;
+
+	if (!can_be_bottom && !can_be_top)
+		return -EINVAL;
+
+	/* Prefer top, if both are valid */
+	use_top = can_be_top;
+
+	/* lock_len: length of region that should end up locked */
+	if (use_top)
+		lock_len = mtd->size - ofs;
+	else
+		lock_len = ofs + len;
+
+	if (lock_len == mtd->size) {
+		val = mask;
+	} else {
+		min_prot_len = spi_nor_get_min_prot_length_sr(nor);
+		pow = ilog2(lock_len) - ilog2(min_prot_len) + 1;
+		val = pow << SR_BP_SHIFT;
+
+		if (nor->flags & SNOR_F_HAS_SR_BP3_BIT6 && val & SR_BP3)
+			val = (val & ~SR_BP3) | SR_BP3_BIT6;
+
+		if (val & ~mask)
+			return -EINVAL;
+
+		/* Don't "lock" with no region! */
+		if (!(val & mask))
+			return -EINVAL;
+	}
+
+	status_new = (status_old & ~mask & ~tb_mask) | val;
+
+	/* Disallow further writes if WP pin is asserted */
+	status_new |= SR_SRWD;
+
+	if (!use_top)
+		status_new |= tb_mask;
+
+	/* Don't bother if they're the same */
+	if (status_new == status_old)
+		return 0;
+
+	/* Only modify protection if it will not unlock other areas */
+	if ((status_new & mask) < (status_old & mask))
+		return -EINVAL;
+
+	return spi_nor_write_sr_and_check(nor, status_new);
+}
+
+/*
+ * Unlock a region of the flash. See spi_nor_sr_lock() for more info
+ *
+ * Returns negative on errors, 0 on success.
+ */
+static int spi_nor_sr_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+	struct mtd_info *mtd = &nor->mtd;
+	u64 min_prot_len;
+	int ret, status_old, status_new;
+	u8 mask = spi_nor_get_sr_bp_mask(nor);
+	u8 tb_mask = spi_nor_get_sr_tb_mask(nor);
+	u8 pow, val;
+	loff_t lock_len;
+	bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB;
+	bool use_top;
+
+	ret = spi_nor_read_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	status_old = nor->bouncebuf[0];
+
+	/* If nothing in our range is locked, we don't need to do anything */
+	if (spi_nor_is_unlocked_sr(nor, ofs, len, status_old))
+		return 0;
+
+	/* If anything below us is locked, we can't use 'top' protection */
+	if (!spi_nor_is_unlocked_sr(nor, 0, ofs, status_old))
+		can_be_top = false;
+
+	/* If anything above us is locked, we can't use 'bottom' protection */
+	if (!spi_nor_is_unlocked_sr(nor, ofs + len, mtd->size - (ofs + len),
+				    status_old))
+		can_be_bottom = false;
+
+	if (!can_be_bottom && !can_be_top)
+		return -EINVAL;
+
+	/* Prefer top, if both are valid */
+	use_top = can_be_top;
+
+	/* lock_len: length of region that should remain locked */
+	if (use_top)
+		lock_len = mtd->size - (ofs + len);
+	else
+		lock_len = ofs;
+
+	if (lock_len == 0) {
+		val = 0; /* fully unlocked */
+	} else {
+		min_prot_len = spi_nor_get_min_prot_length_sr(nor);
+		pow = ilog2(lock_len) - ilog2(min_prot_len) + 1;
+		val = pow << SR_BP_SHIFT;
+
+		if (nor->flags & SNOR_F_HAS_SR_BP3_BIT6 && val & SR_BP3)
+			val = (val & ~SR_BP3) | SR_BP3_BIT6;
+
+		/* Some power-of-two sizes are not supported */
+		if (val & ~mask)
+			return -EINVAL;
+	}
+
+	status_new = (status_old & ~mask & ~tb_mask) | val;
+
+	/* Don't protect status register if we're fully unlocked */
+	if (lock_len == 0)
+		status_new &= ~SR_SRWD;
+
+	if (!use_top)
+		status_new |= tb_mask;
+
+	/* Don't bother if they're the same */
+	if (status_new == status_old)
+		return 0;
+
+	/* Only modify protection if it will not lock other areas */
+	if ((status_new & mask) > (status_old & mask))
+		return -EINVAL;
+
+	return spi_nor_write_sr_and_check(nor, status_new);
+}
+
+/*
+ * Check if a region of the flash is (completely) locked. See spi_nor_sr_lock()
+ * for more info.
+ *
+ * Returns 1 if entire region is locked, 0 if any portion is unlocked, and
+ * negative on errors.
+ */
+static int spi_nor_sr_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+	int ret;
+
+	ret = spi_nor_read_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	return spi_nor_is_locked_sr(nor, ofs, len, nor->bouncebuf[0]);
+}
+
+static const struct spi_nor_locking_ops spi_nor_sr_locking_ops = {
+	.lock = spi_nor_sr_lock,
+	.unlock = spi_nor_sr_unlock,
+	.is_locked = spi_nor_sr_is_locked,
+};
+
+void spi_nor_init_default_locking_ops(struct spi_nor *nor)
+{
+	nor->params->locking_ops = &spi_nor_sr_locking_ops;
+}
+
+static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	int ret;
+
+	ret = spi_nor_lock_and_prep(nor);
+	if (ret)
+		return ret;
+
+	ret = nor->params->locking_ops->lock(nor, ofs, len);
+
+	spi_nor_unlock_and_unprep(nor);
+	return ret;
+}
+
+static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	int ret;
+
+	ret = spi_nor_lock_and_prep(nor);
+	if (ret)
+		return ret;
+
+	ret = nor->params->locking_ops->unlock(nor, ofs, len);
+
+	spi_nor_unlock_and_unprep(nor);
+	return ret;
+}
+
+static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	int ret;
+
+	ret = spi_nor_lock_and_prep(nor);
+	if (ret)
+		return ret;
+
+	ret = nor->params->locking_ops->is_locked(nor, ofs, len);
+
+	spi_nor_unlock_and_unprep(nor);
+	return ret;
+}
+
+/**
+ * spi_nor_try_unlock_all() - Tries to unlock the entire flash memory array.
+ * @nor:	pointer to a 'struct spi_nor'.
+ *
+ * Some SPI NOR flashes are write protected by default after a power-on reset
+ * cycle, in order to avoid inadvertent writes during power-up. Backward
+ * compatibility imposes to unlock the entire flash memory array at power-up
+ * by default.
+ *
+ * Unprotecting the entire flash array will fail for boards which are hardware
+ * write-protected. Thus any errors are ignored.
+ */
+void spi_nor_try_unlock_all(struct spi_nor *nor)
+{
+	int ret;
+
+	if (!(nor->flags & SNOR_F_HAS_LOCK))
+		return;
+
+	dev_dbg(nor->dev, "Unprotecting entire flash array\n");
+
+	ret = spi_nor_unlock(&nor->mtd, 0, nor->params->size);
+	if (ret)
+		dev_dbg(nor->dev, "Failed to unlock the entire flash memory array\n");
+}
+
+void spi_nor_register_locking_ops(struct spi_nor *nor)
+{
+	struct mtd_info *mtd = &nor->mtd;
+
+	if (!nor->params->locking_ops)
+		return;
+
+	mtd->_lock = spi_nor_lock;
+	mtd->_unlock = spi_nor_unlock;
+	mtd->_is_locked = spi_nor_is_locked;
+}

drivers/mtd/spi-nor/winbond.c

@@ -11,8 +11,7 @@
 static int
 w25q256_post_bfpt_fixups(struct spi_nor *nor,
 			 const struct sfdp_parameter_header *bfpt_header,
-			 const struct sfdp_bfpt *bfpt,
+			 const struct sfdp_bfpt *bfpt)
-			 struct spi_nor_flash_parameter *params)
 {
 	/*
 	 * W25Q256JV supports 4B opcodes but W25Q256FV does not.
@@ -55,14 +54,18 @@ static const struct flash_info winbond_parts[] = {
 	{ "w25q32", INFO(0xef4016, 0, 64 * 1024,  64, SECT_4K) },
 	{ "w25q32dw", INFO(0xef6016, 0, 64 * 1024,  64,
 			   SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			   SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+			   SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+			   OTP_INFO(256, 3, 0x1000, 0x1000)
+	},
+
 	{ "w25q32jv", INFO(0xef7016, 0, 64 * 1024,  64,
 			   SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
 			   SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
 	},
 	{ "w25q32jwm", INFO(0xef8016, 0, 64 * 1024,  64,
 			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			    SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+			    SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+			    OTP_INFO(256, 3, 0x1000, 0x1000) },
 	{ "w25q64jwm", INFO(0xef8017, 0, 64 * 1024, 128,
 			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
 			    SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
@@ -97,6 +100,8 @@ static const struct flash_info winbond_parts[] = {
 			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 	{ "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
 			    SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
+	{ "w25q512jvq", INFO(0xef4020, 0, 64 * 1024, 1024,
+			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 };
 
 /**
@@ -131,9 +136,18 @@ static int winbond_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
 	return spi_nor_write_disable(nor);
 }
 
+static const struct spi_nor_otp_ops winbond_otp_ops = {
+	.read = spi_nor_otp_read_secr,
+	.write = spi_nor_otp_write_secr,
+	.lock = spi_nor_otp_lock_sr2,
+	.is_locked = spi_nor_otp_is_locked_sr2,
+};
+
 static void winbond_default_init(struct spi_nor *nor)
 {
 	nor->params->set_4byte_addr_mode = winbond_set_4byte_addr_mode;
+	if (nor->params->otp.org->n_regions)
+		nor->params->otp.ops = &winbond_otp_ops;
 }
 
 static const struct spi_nor_fixups winbond_fixups = {

include/linux/mfd/lpc_ich.h

@@ -8,7 +8,7 @@
 #ifndef LPC_ICH_H
 #define LPC_ICH_H
 
-#include <linux/platform_data/intel-spi.h>
+#include <linux/platform_data/x86/intel-spi.h>
 
 /* GPIO resources */
 #define ICH_RES_GPIO	0

include/linux/mtd/blktrans.h

@@ -77,5 +77,16 @@ extern int add_mtd_blktrans_dev(struct mtd_blktrans_dev *dev);
 extern int del_mtd_blktrans_dev(struct mtd_blktrans_dev *dev);
 extern int mtd_blktrans_cease_background(struct mtd_blktrans_dev *dev);
 
+/**
+ * module_mtd_blktrans() - Helper macro for registering a mtd blktrans driver
+ * @__mtd_blktrans: mtd_blktrans_ops struct
+ *
+ * Helper macro for mtd blktrans drivers which do not do anything special in
+ * module init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+#define module_mtd_blktrans(__mtd_blktrans) \
+	module_driver(__mtd_blktrans, register_mtd_blktrans, \
+					deregister_mtd_blktrans)
 
 #endif /* __MTD_TRANS_H__ */

include/linux/mtd/mtd.h

@@ -229,6 +229,7 @@ struct mtd_part {
  */
 struct mtd_master {
 	struct mutex partitions_lock;
+	struct mutex chrdev_lock;
 	unsigned int suspended : 1;
 };
 
@@ -333,9 +334,12 @@ struct mtd_info {
 	int (*_read_user_prot_reg) (struct mtd_info *mtd, loff_t from,
 				    size_t len, size_t *retlen, u_char *buf);
 	int (*_write_user_prot_reg) (struct mtd_info *mtd, loff_t to,
-				     size_t len, size_t *retlen, u_char *buf);
+				     size_t len, size_t *retlen,
+				     const u_char *buf);
 	int (*_lock_user_prot_reg) (struct mtd_info *mtd, loff_t from,
 				    size_t len);
+	int (*_erase_user_prot_reg) (struct mtd_info *mtd, loff_t from,
+				     size_t len);
 	int (*_writev) (struct mtd_info *mtd, const struct kvec *vecs,
 			unsigned long count, loff_t to, size_t *retlen);
 	void (*_sync) (struct mtd_info *mtd);
@@ -515,8 +519,9 @@ int mtd_get_user_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
 int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
 			   size_t *retlen, u_char *buf);
 int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
-			    size_t *retlen, u_char *buf);
+			    size_t *retlen, const u_char *buf);
 int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len);
+int mtd_erase_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len);
 
 int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
 	       unsigned long count, loff_t to, size_t *retlen);

include/linux/mtd/nand-ecc-sw-bch.h

@@ -16,7 +16,6 @@
  * @req_ctx: Save request context and tweak the original request to fit the
  *           engine needs
  * @code_size: Number of bytes needed to store a code (one code per step)
- * @nsteps: Number of steps
  * @calc_buf: Buffer to use when calculating ECC bytes
  * @code_buf: Buffer to use when reading (raw) ECC bytes from the chip
  * @bch: BCH control structure
@@ -26,7 +25,6 @@
 struct nand_ecc_sw_bch_conf {
 	struct nand_ecc_req_tweak_ctx req_ctx;
 	unsigned int code_size;
-	unsigned int nsteps;
 	u8 *calc_buf;
 	u8 *code_buf;
 	struct bch_control *bch;

include/linux/mtd/nand-ecc-sw-hamming.h

@@ -17,7 +17,6 @@
  * @req_ctx: Save request context and tweak the original request to fit the
  *           engine needs
  * @code_size: Number of bytes needed to store a code (one code per step)
- * @nsteps: Number of steps
  * @calc_buf: Buffer to use when calculating ECC bytes
  * @code_buf: Buffer to use when reading (raw) ECC bytes from the chip
  * @sm_order: Smart Media special ordering
@@ -25,7 +24,6 @@
 struct nand_ecc_sw_hamming_conf {
 	struct nand_ecc_req_tweak_ctx req_ctx;
 	unsigned int code_size;
-	unsigned int nsteps;
 	u8 *calc_buf;
 	u8 *code_buf;
 	unsigned int sm_order;

include/linux/mtd/nand.h

@@ -231,12 +231,14 @@ struct nand_ops {
 /**
  * struct nand_ecc_context - Context for the ECC engine
  * @conf: basic ECC engine parameters
+ * @nsteps: number of ECC steps
  * @total: total number of bytes used for storing ECC codes, this is used by
  *         generic OOB layouts
  * @priv: ECC engine driver private data
  */
 struct nand_ecc_context {
 	struct nand_ecc_props conf;
+	unsigned int nsteps;
 	unsigned int total;
 	void *priv;
 };
@@ -585,6 +587,26 @@ nanddev_get_ecc_conf(struct nand_device *nand)
 	return &nand->ecc.ctx.conf;
 }
 
+/**
+ * nanddev_get_ecc_nsteps() - Extract the number of ECC steps
+ * @nand: NAND device
+ */
+static inline unsigned int
+nanddev_get_ecc_nsteps(struct nand_device *nand)
+{
+	return nand->ecc.ctx.nsteps;
+}
+
+/**
+ * nanddev_get_ecc_bytes_per_step() - Extract the number of ECC bytes per step
+ * @nand: NAND device
+ */
+static inline unsigned int
+nanddev_get_ecc_bytes_per_step(struct nand_device *nand)
+{
+	return nand->ecc.ctx.total / nand->ecc.ctx.nsteps;
+}
+
 /**
  * nanddev_get_ecc_requirements() - Extract the ECC requirements from a NAND
  *                                  device

include/linux/mtd/rawnand.h

@@ -18,7 +18,6 @@
 #include <linux/mtd/flashchip.h>
 #include <linux/mtd/bbm.h>
 #include <linux/mtd/jedec.h>
-#include <linux/mtd/nand.h>
 #include <linux/mtd/onfi.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
@@ -1036,6 +1035,16 @@ struct nand_manufacturer {
 	void *priv;
 };
 
+/**
+ * struct nand_secure_region - NAND secure region structure
+ * @offset: Offset of the start of the secure region
+ * @size: Size of the secure region
+ */
+struct nand_secure_region {
+	u64 offset;
+	u64 size;
+};
+
 /**
  * struct nand_chip - NAND Private Flash Chip Data
  * @base: Inherit from the generic NAND device
@@ -1086,6 +1095,8 @@ struct nand_manufacturer {
  *          NAND Controller drivers should not modify this value, but they're
  *          allowed to read it.
  * @read_retries: The number of read retry modes supported
+ * @secure_regions: Structure containing the secure regions info
+ * @nr_secure_regions: Number of secure regions
  * @controller: The hardware controller	structure which is shared among multiple
  *              independent devices
  * @ecc: The ECC controller structure
@@ -1135,6 +1146,8 @@ struct nand_chip {
 	unsigned int suspended : 1;
 	int cur_cs;
 	int read_retries;
+	struct nand_secure_region *secure_regions;
+	u8 nr_secure_regions;
 
 	/* Externals */
 	struct nand_controller *controller;

include/linux/mtd/spi-nor.h

@@ -107,6 +107,11 @@
 #define SPINOR_OP_RD_EVCR      0x65    /* Read EVCR register */
 #define SPINOR_OP_WD_EVCR      0x61    /* Write EVCR register */
 
+/* Used for GigaDevices and Winbond flashes. */
+#define SPINOR_OP_ESECR		0x44	/* Erase Security registers */
+#define SPINOR_OP_PSECR		0x42	/* Program Security registers */
+#define SPINOR_OP_RSECR		0x48	/* Read Security registers */
+
 /* Status Register bits. */
 #define SR_WIP			BIT(0)	/* Write in progress */
 #define SR_WEL			BIT(1)	/* Write enable latch */
@@ -138,6 +143,9 @@
 
 /* Status Register 2 bits. */
 #define SR2_QUAD_EN_BIT1	BIT(1)
+#define SR2_LB1			BIT(3)	/* Security Register Lock Bit 1 */
+#define SR2_LB2			BIT(4)	/* Security Register Lock Bit 2 */
+#define SR2_LB3			BIT(5)	/* Security Register Lock Bit 3 */
 #define SR2_QUAD_EN_BIT7	BIT(7)
 
 /* Supported SPI protocols */

include/uapi/mtd/mtd-abi.h

@@ -205,6 +205,8 @@ struct otp_info {
  * without OOB, e.g., NOR flash.
  */
 #define MEMWRITE		_IOWR('M', 24, struct mtd_write_req)
+/* Erase a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */
+#define OTPERASE		_IOW('M', 25, struct otp_info)
 
 /*
  * Obsolete legacy interface. Keep it in order not to break userspace