ntb: use errata flag set via DID to implement workaround

Instead of using a module parameter, we should detect the errata via
PCI DID and then set an appropriate flag. This will be used for additional
errata later on.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
This commit is contained in:
Dave Jiang 2014-08-28 13:53:18 -07:00 committed by Jon Mason
parent 1db97f2589
commit 069684e888
2 changed files with 42 additions and 9 deletions

View File

@ -64,10 +64,6 @@ MODULE_VERSION(NTB_VER);
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Intel Corporation");
static bool xeon_errata_workaround = true;
module_param(xeon_errata_workaround, bool, 0644);
MODULE_PARM_DESC(xeon_errata_workaround, "Workaround for the Xeon Errata");
enum {
NTB_CONN_TRANSPARENT = 0,
NTB_CONN_B2B,
@ -144,6 +140,30 @@ static int is_ntb_atom(struct ntb_device *ndev)
return 0;
}
static void ntb_set_errata_flags(struct ntb_device *ndev)
{
switch (ndev->pdev->device) {
/*
* this workaround applies to all platform up to IvyBridge
* Haswell has splitbar support and use a different workaround
*/
case PCI_DEVICE_ID_INTEL_NTB_SS_JSF:
case PCI_DEVICE_ID_INTEL_NTB_SS_SNB:
case PCI_DEVICE_ID_INTEL_NTB_SS_IVT:
case PCI_DEVICE_ID_INTEL_NTB_SS_HSX:
case PCI_DEVICE_ID_INTEL_NTB_PS_JSF:
case PCI_DEVICE_ID_INTEL_NTB_PS_SNB:
case PCI_DEVICE_ID_INTEL_NTB_PS_IVT:
case PCI_DEVICE_ID_INTEL_NTB_PS_HSX:
case PCI_DEVICE_ID_INTEL_NTB_B2B_JSF:
case PCI_DEVICE_ID_INTEL_NTB_B2B_SNB:
case PCI_DEVICE_ID_INTEL_NTB_B2B_IVT:
case PCI_DEVICE_ID_INTEL_NTB_B2B_HSX:
ndev->wa_flags |= WA_SNB_ERR;
break;
}
}
/**
* ntb_register_event_callback() - register event callback
* @ndev: pointer to ntb_device instance
@ -717,7 +737,7 @@ static int ntb_xeon_setup(struct ntb_device *ndev)
* this use the second memory window to access the interrupt and
* scratch pad registers on the remote system.
*/
if (xeon_errata_workaround) {
if (ndev->wa_flags & WA_SNB_ERR) {
if (!ndev->mw[1].bar_sz)
return -EINVAL;
@ -772,7 +792,7 @@ static int ntb_xeon_setup(struct ntb_device *ndev)
if (ndev->dev_type == NTB_DEV_USD) {
writeq(SNB_MBAR23_DSD_ADDR, ndev->reg_base +
SNB_PBAR2XLAT_OFFSET);
if (xeon_errata_workaround)
if (ndev->wa_flags & WA_SNB_ERR)
writeq(SNB_MBAR01_DSD_ADDR, ndev->reg_base +
SNB_PBAR4XLAT_OFFSET);
else {
@ -796,7 +816,7 @@ static int ntb_xeon_setup(struct ntb_device *ndev)
} else {
writeq(SNB_MBAR23_USD_ADDR, ndev->reg_base +
SNB_PBAR2XLAT_OFFSET);
if (xeon_errata_workaround)
if (ndev->wa_flags & WA_SNB_ERR)
writeq(SNB_MBAR01_USD_ADDR, ndev->reg_base +
SNB_PBAR4XLAT_OFFSET);
else {
@ -819,9 +839,9 @@ static int ntb_xeon_setup(struct ntb_device *ndev)
}
break;
case NTB_CONN_RP:
if (xeon_errata_workaround) {
if (ndev->wa_flags & WA_SNB_ERR) {
dev_err(&ndev->pdev->dev,
"NTB-RP disabled due to hardware errata. To disregard this warning and potentially lock-up the system, add the parameter 'xeon_errata_workaround=0'.\n");
"NTB-RP disabled due to hardware errata.\n");
return -EINVAL;
}
@ -848,6 +868,12 @@ static int ntb_xeon_setup(struct ntb_device *ndev)
ndev->limits.max_mw = SNB_MAX_MW;
break;
case NTB_CONN_TRANSPARENT:
if (ndev->wa_flags & WA_SNB_ERR) {
dev_err(&ndev->pdev->dev,
"NTB-TRANSPARENT disabled due to hardware errata.\n");
return -EINVAL;
}
/* Scratch pads need to have exclusive access from the primary
* or secondary side. Halve the num spads so that each side can
* have an equal amount.
@ -1595,6 +1621,9 @@ static int ntb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return -ENOMEM;
ndev->pdev = pdev;
ntb_set_errata_flags(ndev);
ndev->link_status = NTB_LINK_DOWN;
pci_set_drvdata(pdev, ndev);
ntb_setup_debugfs(ndev);

View File

@ -109,6 +109,8 @@ struct ntb_db_cb {
struct tasklet_struct irq_work;
};
#define WA_SNB_ERR 0x00000001
struct ntb_device {
struct pci_dev *pdev;
struct msix_entry *msix_entries;
@ -153,6 +155,8 @@ struct ntb_device {
struct dentry *debugfs_dir;
struct dentry *debugfs_info;
unsigned int wa_flags;
};
/**