[CPUFREQ] dual-core powernow-k8

With the release of the dual-core AMD Opterons last week,
it's high time that cpufreq supported them.  The attached
patch applies cleanly to 2.6.12-rc3 and updates powernow-k8
to support the latest Athlon 64 and Opteron processors.

Update the driver to version 1.40.0 and provide support
for dual-core processors.

Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>
This commit is contained in:
Dave Jones 2005-05-31 19:03:46 -07:00
parent 7f335d4ef2
commit 065b807ca1
2 changed files with 91 additions and 37 deletions

View File

@ -4,7 +4,7 @@
* GNU general public license version 2. See "COPYING" or
* http://www.gnu.org/licenses/gpl.html
*
* Support : paul.devriendt@amd.com
* Support : mark.langsdorf@amd.com
*
* Based on the powernow-k7.c module written by Dave Jones.
* (C) 2003 Dave Jones <davej@codemonkey.org.uk> on behalf of SuSE Labs
@ -15,6 +15,7 @@
*
* Valuable input gratefully received from Dave Jones, Pavel Machek,
* Dominik Brodowski, and others.
* Originally developed by Paul Devriendt.
* Processor information obtained from Chapter 9 (Power and Thermal Management)
* of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD
* Opteron Processors" available for download from www.amd.com
@ -30,6 +31,7 @@
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/cpumask.h>
#include <asm/msr.h>
#include <asm/io.h>
@ -42,7 +44,7 @@
#define PFX "powernow-k8: "
#define BFX PFX "BIOS error: "
#define VERSION "version 1.00.09e"
#define VERSION "version 1.40.2"
#include "powernow-k8.h"
/* serialize freq changes */
@ -50,6 +52,10 @@ static DECLARE_MUTEX(fidvid_sem);
static struct powernow_k8_data *powernow_data[NR_CPUS];
#ifndef CONFIG_SMP
static cpumask_t cpu_core_map[1];
#endif
/* Return a frequency in MHz, given an input fid */
static u32 find_freq_from_fid(u32 fid)
{
@ -274,11 +280,18 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid
{
u32 rvosteps = data->rvo;
u32 savefid = data->currfid;
u32 maxvid, lo;
dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n",
smp_processor_id(),
data->currfid, data->currvid, reqvid, data->rvo);
rdmsr(MSR_FIDVID_STATUS, lo, maxvid);
maxvid = 0x1f & (maxvid >> 16);
dprintk("ph1 maxvid=0x%x\n", maxvid);
if (reqvid < maxvid) /* lower numbers are higher voltages */
reqvid = maxvid;
while (data->currvid > reqvid) {
dprintk("ph1: curr 0x%x, req vid 0x%x\n",
data->currvid, reqvid);
@ -287,7 +300,7 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid
}
while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) {
if (data->currvid == 0) {
if (data->currvid == maxvid) {
rvosteps = 0;
} else {
dprintk("ph1: changing vid for rvo, req 0x%x\n",
@ -671,7 +684,7 @@ static int find_psb_table(struct powernow_k8_data *data)
* BIOS and Kernel Developer's Guide, which is available on
* www.amd.com
*/
printk(KERN_ERR PFX "BIOS error - no PSB\n");
printk(KERN_INFO PFX "BIOS error - no PSB or ACPI _PSS objects\n");
return -ENODEV;
}
@ -695,7 +708,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
struct cpufreq_frequency_table *powernow_table;
if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
dprintk("register performance failed\n");
dprintk("register performance failed: bad ACPI data\n");
return -EIO;
}
@ -746,6 +759,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
continue;
}
/* verify only 1 entry from the lo frequency table */
if (fid < HI_FID_TABLE_BOTTOM) {
if (cntlofreq) {
/* if both entries are the same, ignore this
@ -816,7 +830,7 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde
{
u32 fid;
u32 vid;
int res;
int res, i;
struct cpufreq_freqs freqs;
dprintk("cpu %d transition to index %u\n", smp_processor_id(), index);
@ -841,7 +855,8 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde
}
if ((fid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) {
printk("ignoring illegal change in lo freq table-%x to 0x%x\n",
printk(KERN_ERR PFX
"ignoring illegal change in lo freq table-%x to 0x%x\n",
data->currfid, fid);
return 1;
}
@ -850,18 +865,20 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde
smp_processor_id(), fid, vid);
freqs.cpu = data->cpu;
freqs.old = find_khz_freq_from_fid(data->currfid);
freqs.new = find_khz_freq_from_fid(fid);
for_each_cpu_mask(i, cpu_core_map[data->cpu]) {
freqs.cpu = i;
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
}
down(&fidvid_sem);
res = transition_fid_vid(data, fid, vid);
up(&fidvid_sem);
freqs.new = find_khz_freq_from_fid(data->currfid);
for_each_cpu_mask(i, cpu_core_map[data->cpu]) {
freqs.cpu = i;
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
}
return res;
}
@ -874,6 +891,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
u32 checkvid = data->currvid;
unsigned int newstate;
int ret = -EIO;
int i;
/* only run on specific CPU from here on */
oldmask = current->cpus_allowed;
@ -902,22 +920,41 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
data->currfid, data->currvid);
if ((checkvid != data->currvid) || (checkfid != data->currfid)) {
printk(KERN_ERR PFX
"error - out of sync, fid 0x%x 0x%x, vid 0x%x 0x%x\n",
printk(KERN_INFO PFX
"error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n",
checkfid, data->currfid, checkvid, data->currvid);
}
if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate))
goto err_out;
down(&fidvid_sem);
for_each_cpu_mask(i, cpu_core_map[pol->cpu]) {
/* make sure the sibling is initialized */
if (!powernow_data[i]) {
ret = 0;
up(&fidvid_sem);
goto err_out;
}
}
powernow_k8_acpi_pst_values(data, newstate);
if (transition_frequency(data, newstate)) {
printk(KERN_ERR PFX "transition frequency failed\n");
ret = 1;
up(&fidvid_sem);
goto err_out;
}
/* Update all the fid/vids of our siblings */
for_each_cpu_mask(i, cpu_core_map[pol->cpu]) {
powernow_data[i]->currvid = data->currvid;
powernow_data[i]->currfid = data->currfid;
}
up(&fidvid_sem);
pol->cur = find_khz_freq_from_fid(data->currfid);
ret = 0;
@ -962,7 +999,7 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol)
*/
if ((num_online_cpus() != 1) || (num_possible_cpus() != 1)) {
printk(KERN_INFO PFX "MP systems not supported by PSB BIOS structure\n");
printk(KERN_ERR PFX "MP systems not supported by PSB BIOS structure\n");
kfree(data);
return -ENODEV;
}
@ -1003,6 +1040,7 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol)
schedule();
pol->governor = CPUFREQ_DEFAULT_GOVERNOR;
pol->cpus = cpu_core_map[pol->cpu];
/* Take a crude guess here.
* That guess was in microseconds, so multiply with 1000 */
@ -1127,9 +1165,10 @@ static void __exit powernowk8_exit(void)
cpufreq_unregister_driver(&cpufreq_amd64_driver);
}
MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com>");
MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com.");
MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver.");
MODULE_LICENSE("GPL");
late_initcall(powernowk8_init);
module_exit(powernowk8_exit);

View File

@ -174,3 +174,18 @@ static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvi
static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index);
#ifndef for_each_cpu_mask
#define for_each_cpu_mask(i,mask) for (i=0;i<1;i++)
#endif
#ifdef CONFIG_SMP
static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[])
{
}
#else
static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[])
{
cpu_set(0, cpu_sharedcore_mask[0]);
}
#endif