tg3: tg3_disable_ints using uninitialized mailbox value to disable interrupts
During driver load in tg3_init_one, if the driver detects DMA activity before intializing the chip tg3_halt is called. As part of tg3_halt interrupts are disabled using routine tg3_disable_ints. This routine was using mailbox value which was not initialized (default value is 0). As a result driver was writing 0x00000001 to pci config space register 0, which is the vendor id / device id. This driver bug was exposed because of the commit a7877b17a667 (PCI: Check only the Vendor ID to identify Configuration Request Retry). Also this issue is only seen in older generation chipsets like 5722 because config space write to offset 0 from driver is possible. The newer generation chips ignore writes to offset 0. Also without commit a7877b17a667, for these older chips when a GRC reset is issued the Bootcode would reprogram the vendor id/device id, which is the reason this bug was masked earlier. Fixed by initializing the interrupt mailbox registers before calling tg3_halt. Please queue for -stable. Reported-by: Nils Holland <nholland@tisys.org> Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
6d08acd2d3
commit
05b0aa5793
|
@ -17800,23 +17800,6 @@ static int tg3_init_one(struct pci_dev *pdev,
|
|||
goto err_out_apeunmap;
|
||||
}
|
||||
|
||||
/*
|
||||
* Reset chip in case UNDI or EFI driver did not shutdown
|
||||
* DMA self test will enable WDMAC and we'll see (spurious)
|
||||
* pending DMA on the PCI bus at that point.
|
||||
*/
|
||||
if ((tr32(HOSTCC_MODE) & HOSTCC_MODE_ENABLE) ||
|
||||
(tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) {
|
||||
tw32(MEMARB_MODE, MEMARB_MODE_ENABLE);
|
||||
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
|
||||
}
|
||||
|
||||
err = tg3_test_dma(tp);
|
||||
if (err) {
|
||||
dev_err(&pdev->dev, "DMA engine test failed, aborting\n");
|
||||
goto err_out_apeunmap;
|
||||
}
|
||||
|
||||
intmbx = MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW;
|
||||
rcvmbx = MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW;
|
||||
sndmbx = MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW;
|
||||
|
@ -17861,6 +17844,23 @@ static int tg3_init_one(struct pci_dev *pdev,
|
|||
sndmbx += 0xc;
|
||||
}
|
||||
|
||||
/*
|
||||
* Reset chip in case UNDI or EFI driver did not shutdown
|
||||
* DMA self test will enable WDMAC and we'll see (spurious)
|
||||
* pending DMA on the PCI bus at that point.
|
||||
*/
|
||||
if ((tr32(HOSTCC_MODE) & HOSTCC_MODE_ENABLE) ||
|
||||
(tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) {
|
||||
tw32(MEMARB_MODE, MEMARB_MODE_ENABLE);
|
||||
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
|
||||
}
|
||||
|
||||
err = tg3_test_dma(tp);
|
||||
if (err) {
|
||||
dev_err(&pdev->dev, "DMA engine test failed, aborting\n");
|
||||
goto err_out_apeunmap;
|
||||
}
|
||||
|
||||
tg3_init_coal(tp);
|
||||
|
||||
pci_set_drvdata(pdev, dev);
|
||||
|
|
Loading…
Reference in New Issue