From 05057c0621dea083b617e7c35437faa9db7b7104 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Thu, 10 May 2012 12:13:48 +0300 Subject: [PATCH] wl18xx: change board type enum according to new FW Add more board types and remove a now unneeded write to SCR_PAD2 setting the board type. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl18xx/main.c | 43 +++++++++++---------------- drivers/net/wireless/ti/wl18xx/reg.h | 15 ++++------ 2 files changed, 22 insertions(+), 36 deletions(-) diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index ddd11d00f033..f892d37443e2 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -45,12 +45,6 @@ static char *ht_mode_param; static char *board_type_param; -static const u32 wl18xx_board_type_to_scrpad2[NUM_BOARD_TYPES] = { - [BOARD_TYPE_FPGA_18XX] = SCR_PAD2_BOARD_TYPE_FPGA, - [BOARD_TYPE_HDK_18XX] = SCR_PAD2_BOARD_TYPE_HDK, - [BOARD_TYPE_DVP_EVB_18XX] = SCR_PAD2_BOARD_TYPE_DVP_EVB, -}; - static const u8 wl18xx_rate_to_idx_2ghz[] = { /* MCS rates are used only with 11n */ 15, /* WL18XX_CONF_HW_RXTX_RATE_MCS15 */ @@ -604,13 +598,8 @@ out: static void wl18xx_set_clk(struct wl1271 *wl) { - struct wl18xx_priv *priv = wl->priv; u32 clk_freq; - /* write the translated board type to SCR_PAD2 */ - wl1271_write32(wl, WL18XX_SCR_PAD2, - wl18xx_board_type_to_scrpad2[priv->board_type]); - wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]); /* TODO: PG2: apparently we need to read the clk type */ @@ -1046,21 +1035,22 @@ int __devinit wl18xx_probe(struct platform_device *pdev) sizeof(wl18xx_mimo_ht_cap)); if (!board_type_param) { - board_type_param = kstrdup("dvp_evb", GFP_KERNEL); - priv->board_type = BOARD_TYPE_DVP_EVB_18XX; + board_type_param = kstrdup("dvp", GFP_KERNEL); + priv->board_type = BOARD_TYPE_DVP_18XX; + } else if (!strcmp(board_type_param, "fpga")) { + priv->board_type = BOARD_TYPE_FPGA_18XX; + } else if (!strcmp(board_type_param, "hdk")) { + priv->board_type = BOARD_TYPE_HDK_18XX; + } else if (!strcmp(board_type_param, "dvp")) { + priv->board_type = BOARD_TYPE_DVP_18XX; + } else if (!strcmp(board_type_param, "evb")) { + priv->board_type = BOARD_TYPE_EVB_18XX; + } else if (!strcmp(board_type_param, "com8")) { + priv->board_type = BOARD_TYPE_COM8_18XX; } else { - if (!strcmp(board_type_param, "fpga")) - priv->board_type = BOARD_TYPE_FPGA_18XX; - else if (!strcmp(board_type_param, "hdk")) - priv->board_type = BOARD_TYPE_HDK_18XX; - else if (!strcmp(board_type_param, "dvp_evb")) - priv->board_type = BOARD_TYPE_DVP_EVB_18XX; - else { - wl1271_error("invalid board type '%s'", - board_type_param); - wlcore_free_hw(wl); - return -EINVAL; - } + wl1271_error("invalid board type '%s'", board_type_param); + wlcore_free_hw(wl); + return -EINVAL; } wl18xx_conf_init(wl); @@ -1100,7 +1090,8 @@ module_param_named(ht_mode, ht_mode_param, charp, S_IRUSR); MODULE_PARM_DESC(ht_mode, "Force HT mode: wide or mimo"); module_param_named(board_type, board_type_param, charp, S_IRUSR); -MODULE_PARM_DESC(board_type, "Board type: fpga, hdk or dvp_evb (default)"); +MODULE_PARM_DESC(board_type, "Board type: fpga, hdk, evb, com8 or " + "dvp (default)"); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Luciano Coelho "); diff --git a/drivers/net/wireless/ti/wl18xx/reg.h b/drivers/net/wireless/ti/wl18xx/reg.h index 43c480fb837f..1674c1ad002e 100644 --- a/drivers/net/wireless/ti/wl18xx/reg.h +++ b/drivers/net/wireless/ti/wl18xx/reg.h @@ -176,20 +176,15 @@ enum { }; enum { - BOARD_TYPE_FPGA_18XX = 0, - BOARD_TYPE_HDK_18XX = 1, - BOARD_TYPE_DVP_EVB_18XX = 2, + BOARD_TYPE_EVB_18XX = 0, + BOARD_TYPE_DVP_18XX = 1, + BOARD_TYPE_HDK_18XX = 2, + BOARD_TYPE_FPGA_18XX = 3, + BOARD_TYPE_COM8_18XX = 4, NUM_BOARD_TYPES, }; -/* board type values used by the firmware in the SCR_PAD2 register */ -enum { - SCR_PAD2_BOARD_TYPE_FPGA = 0xB1, - SCR_PAD2_BOARD_TYPE_HDK = 0xB2, - SCR_PAD2_BOARD_TYPE_DVP_EVB = 0xB3, -}; - struct wl18xx_mac_and_phy_params { u8 phy_standalone; u8 rdl;