i2c-cht-wc: Add device-properties for fusb302 integration
Add device-properties to make the bq24292i charger connected to the bus get its input-current-limit from the fusb302 Type-C port controller which is used on boards with the cht-wc PMIC, as well as regulator_init_data for the 5V boost converter on the bq24292i. Since this means we now hook-up the bq24292i to the fusb302 Type-C port controller add a check for the ACPI device which instantiates the fusb302. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This commit is contained in:
parent
728fe6cef2
commit
0224d45c9d
|
@ -198,6 +198,11 @@ config I2C_CHT_WC
|
|||
SMBus controller found in the Intel Cherry Trail Whiskey Cove PMIC
|
||||
found on some Intel Cherry Trail systems.
|
||||
|
||||
Note this controller is hooked up to a TI bq24292i charger-IC,
|
||||
combined with a FUSB302 Type-C port-controller as such it is advised
|
||||
to also select CONFIG_CHARGER_BQ24190=m and CONFIG_TYPEC_FUSB302=m
|
||||
(the fusb302 driver currently is in drivers/staging).
|
||||
|
||||
config I2C_NFORCE2
|
||||
tristate "Nvidia nForce2, nForce3 and nForce4"
|
||||
depends on PCI
|
||||
|
|
|
@ -16,6 +16,7 @@
|
|||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <linux/acpi.h>
|
||||
#include <linux/completion.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/i2c.h>
|
||||
|
@ -25,6 +26,7 @@
|
|||
#include <linux/mfd/intel_soc_pmic.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/power/bq24190_charger.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
#define CHT_WC_I2C_CTRL 0x5e24
|
||||
|
@ -232,13 +234,35 @@ static const struct irq_chip cht_wc_i2c_irq_chip = {
|
|||
.name = "cht_wc_ext_chrg_irq_chip",
|
||||
};
|
||||
|
||||
static const char * const bq24190_suppliers[] = { "fusb302-typec-source" };
|
||||
|
||||
static const struct property_entry bq24190_props[] = {
|
||||
PROPERTY_ENTRY_STRING("extcon-name", "cht_wcove_pwrsrc"),
|
||||
PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq24190_suppliers),
|
||||
PROPERTY_ENTRY_BOOL("omit-battery-class"),
|
||||
PROPERTY_ENTRY_BOOL("disable-reset"),
|
||||
{ }
|
||||
};
|
||||
|
||||
static struct regulator_consumer_supply fusb302_consumer = {
|
||||
.supply = "vbus",
|
||||
/* Must match fusb302 dev_name in intel_cht_int33fe.c */
|
||||
.dev_name = "i2c-fusb302",
|
||||
};
|
||||
|
||||
static const struct regulator_init_data bq24190_vbus_init_data = {
|
||||
.constraints = {
|
||||
/* The name is used in intel_cht_int33fe.c do not change. */
|
||||
.name = "cht_wc_usb_typec_vbus",
|
||||
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
||||
},
|
||||
.consumer_supplies = &fusb302_consumer,
|
||||
.num_consumer_supplies = 1,
|
||||
};
|
||||
|
||||
static struct bq24190_platform_data bq24190_pdata = {
|
||||
.regulator_init_data = &bq24190_vbus_init_data,
|
||||
};
|
||||
|
||||
static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
|
||||
|
@ -246,7 +270,9 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
|
|||
struct i2c_board_info board_info = {
|
||||
.type = "bq24190",
|
||||
.addr = 0x6b,
|
||||
.dev_name = "bq24190",
|
||||
.properties = bq24190_props,
|
||||
.platform_data = &bq24190_pdata,
|
||||
};
|
||||
int ret, reg, irq;
|
||||
|
||||
|
@ -314,12 +340,22 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
|
|||
if (ret)
|
||||
goto remove_irq_domain;
|
||||
|
||||
/*
|
||||
* Normally the Whiskey Cove PMIC is paired with a TI bq24292i charger,
|
||||
* connected to this i2c bus, and a max17047 fuel-gauge and a fusb302
|
||||
* USB Type-C controller connected to another i2c bus. In this setup
|
||||
* the max17047 and fusb302 devices are enumerated through an INT33FE
|
||||
* ACPI device. If this device is present register an i2c-client for
|
||||
* the TI bq24292i charger.
|
||||
*/
|
||||
if (acpi_dev_present("INT33FE", NULL, -1)) {
|
||||
board_info.irq = adap->client_irq;
|
||||
adap->client = i2c_new_device(&adap->adapter, &board_info);
|
||||
if (!adap->client) {
|
||||
ret = -ENOMEM;
|
||||
goto del_adapter;
|
||||
}
|
||||
}
|
||||
|
||||
platform_set_drvdata(pdev, adap);
|
||||
return 0;
|
||||
|
@ -335,6 +371,7 @@ static int cht_wc_i2c_adap_i2c_remove(struct platform_device *pdev)
|
|||
{
|
||||
struct cht_wc_i2c_adap *adap = platform_get_drvdata(pdev);
|
||||
|
||||
if (adap->client)
|
||||
i2c_unregister_device(adap->client);
|
||||
i2c_del_adapter(&adap->adapter);
|
||||
irq_domain_remove(adap->irq_domain);
|
||||
|
|
Loading…
Reference in New Issue